Raidho TD3.2 Signature Floorstanding Speaker, Walnut Burl (Pair)

The Raidho TD3.2 Signature is a passive 3-way floorstanding speaker with a Raidho ribbon tweeter, a dedicated 13.3 cm midrange driver, and three 16.5 cm Tantalum-Diamond bass drivers, refined following the example of the reference speaker, the TD3.10.

The TD3.2 is the point in the TD line where the midrange gets its own driver in its own enclosure. The Signature version now catches up with exactly the model it inherited its refinements from – and moves a good deal closer to the large reference speaker.

Why the TD3.2 Signature?

The Signature upgrade comes directly from the TD3.10 project – the very model the TD3.2 is already closest to: a reworked crossover, Furutech connection terminals, bass drivers with softer suspension for a deeper, more natural low end, and IsoAcoustics feet instead of the previous ceramic-ball decoupling. Sounds unspectacular, but it adds up to noticeably more calm and resolution.

The concept stays the same, uncompromising one: a dedicated 13.3 cm Tantalum-Diamond midrange driver in its own chamber, the ribbon tweeter above it, three 16.5 cm drivers below for the foundation. Voices play freely, the bass carries – just now with even less character of its own from the speaker.

What you hear

Calm, space, and a midrange band that breathes – and now a bit more of it. Voices detach even more clearly, the stage layers more deeply, the low end of the three woofers gains naturalness through the softer suspension without losing punch. From solo cello to full orchestra, it stays composed and honest: it doesn't embellish anything, it shows what's on the recording – now with less of a middleman between you and the music.

Who is the TD3.2 Signature for?

For medium to large rooms and for anyone who wants a genuine 3-way floorstander with depth, without a subwoofer. Straight talk: with 4 ohms and up to 300 watts of appetite, it's no case for an underpowered amplifier – it wants a stable, current-rich drive, otherwise you give away exactly the composure you're buying it for. And it needs distance from the wall. For smaller rooms or an entry point into the TD Signature program, the TD2.2 Signature is the more sensible choice.

Our verdict

The TD3.2 Signature is the consistent refinement of the model that was already closest to the reference speaker, the TD3.10 – and with Furutech, IsoAcoustics, and a reworked crossover, it moves even closer. If you bring the room and the right amplifier, you get a speaker that keeps finding something new in familiar recordings long after purchase. It costs what Danish handwork in this league costs – and it makes its case with every hour you end up sitting longer than planned.

Technical data

• Type: Passive 3-way floorstanding speaker (Signature)
• Tweeter: Raidho TD ribbon tweeter (planar-magnetic, 11 µm foil)
• Midrange: 1 × 13.3 cm (5.25 in) Raidho Tantalum-Diamond, in its own enclosure
• Bass drivers: 3 × 16.5 cm (6.5 in) Raidho Tantalum-Diamond, softer suspension (Signature)
• Crossover: reworked, derived from the TD3.10 project
• Connection terminals: Furutech
• Bass tuning: bass reflex, rear port, impulse-optimized
• Crossover frequencies: 400 Hz and 2.4 kHz (staggered slope)
• Frequency range: 28 Hz – 50 kHz (±3 dB)
• Sensitivity: 90 dB (2.83 V / 1 m)
• Nominal impedance: 4 ohms
• Recommended amplifier power: 50 – 300 watts
• Decoupling: IsoAcoustics feet (Signature)
• Finishes: gloss black, Walnut Burl (walnut burl veneer), or special color to order
• Dimensions (W × H × D): 315 × 1235 × 505 mm (incl. feet)
• Weight: 55 kg per speaker
• Scope of delivery: 1 pair Raidho TD3.2 Signature

Frequently asked questions

What sets the TD3.2 Signature apart from the standard TD3.2?

The Signature upgrade brings a reworked crossover from the TD3.10 project, Furutech terminals, bass drivers with softer suspension, and IsoAcoustics feet. The driver complement and tuning stay the same – the goal isn't a different sound, but more openness, calm, and a more natural low end.

Which amplifier suits the TD3.2 Signature?

A stable, current-rich amplifier with around 50 to 300 watts at 4 ohms. With 90 dB sensitivity, it's not hard to drive, but rewards powerful amplifier stages with more control. Transistor or high-quality tube – we're happy to advise you on the right match in your system.

Does the TD3.2 Signature need a subwoofer?

No, generally not. Three 16.5 cm woofers with softer suspension bring it down to 28 Hz – with punch and contour. In normal-sized living rooms it delivers a complete foundation. Only with very large spaces or home-cinema ambitions is it worth talking about adding one.

When will the TD3.2 Signature be available?

Raidho unveiled the Signature series at HIGH END, with delivery planned from July 2026. It's best to check the current delivery date and desired finish directly with us – we'll tell you honestly what's possible.

Why buy the Raidho TD3.2 Signature at HD Zürisee?

Because a speaker in this class lives by system, placement, and room. As an authorized Raidho dealer in Wädenswil, we work through amplifier match, positioning, and cabling with you, and deliver and install on site – with our own technician. Call us at 044 680 22 00 or write via WhatsApp 076 534 22 00 (text only, no calls).

Pairs well with

A TD3.2 Signature deserves a drive that handles its 4 ohms with authority – you'll find it under integrated amplifiers. Where else Raidho goes from here is shown in the Raidho series. Planning a whole system around the TD3.2 Signature? That's exactly what we're here for in Wädenswil – call us at 044 680 22 00 or write via WhatsApp 076 534 22 00 (text only, no calls).