Was bringt der Fine-Line-Schliff gegenüber elliptisch?

Eine Fine-Line-Nadel hat eine schmalere, längere Kontaktfläche und liegt näher an der Form des originalen Schneidstichels. Sie holt mehr Information aus der Rille, verzerrt in den Höhen weniger und meistert die problematischen Innenrillen sauberer als ein elliptischer Schliff.

Was unterscheidet den Concorde Music Bronze vom Black?

Gleiches Gehäuse, gleicher Quad-Coil-Generator. Der Bronze hat eine nackte Fine-Line-Nadel, der Black eine nackte Shibata. Shibata kommt dem Schneidstichel noch näher und bringt nochmals mehr Hochton-Energie und feinere Transienten. Wer schon einen Bronze hat, rüstet per reinem Nadeltausch auf den Black auf.

Welcher Plattenspieler passt zum Concorde Music Bronze?

Gut passt ein S-Tonarm-Plattenspieler mit Bajonett-Aufnahme und eine Kette, die Auflösung weitergibt – etwa ein sauber justiertes Technics SL-1200 oder Vergleichbares. Werkzeuglos eingeklickt, sofort spielbereit. Gerade Tonarme mit Standard-Headshell (Rega, Pro-Ject) brauchen einen Concorde-Adapter; und ein guter Phono-Vorverstärker zahlt sich beim Fine-Line spürbar aus.

Warum den Concorde Music Bronze bei HD Zürisee kaufen?

Weil wir High-End seit gut drei Jahrzehnten leben und ehrlich einschätzen, ob deine Kette den Fine-Line-Vorteil überhaupt hörbar macht – oder ob der Blue längst reicht. Statt Verkaufsdruck bekommst du eine offene Empfehlung, und auf Wunsch justiert Mauri das System sauber an deinem Tonarm.

1 12

Ortofon Concorde Music Bronze (MM Cartridge)

CHF 399.00

Sale Sold out

Taxes included. Shipping calculated at checkout.

In stock

Quantity

The Ortofon Concorde Music Bronze is the crossing into High-End territory for the Concorde line: an MM cartridge with a bare Fine Line stylus in a plug-and-play housing that tracks the groove more finely than any model below it.

From here, "practical and good" becomes "practical and genuinely great": the Fine Line grind pulls refinement out of the groove that would normally demand a lot more alignment patience elsewhere.

Why the Concorde Music Bronze?

The jump from Blue to Bronze is the switch from elliptical to Fine Line grinding. A Fine Line stylus has a narrower, longer contact area and sits closer to the shape the groove was originally cut with. That means: more information out of the groove, less distortion in the highs, cleaner inner grooves. In the same housing with the same quad-coil generator and silver-plated coils – plug-and-play like the whole line.

What you hear

Compared with the Blue, the Bronze steps up in refinement: highs resolve more airily, space and depth staging become more tangible, and demanding, heavily modulated passages – string tutti, choirs – stay clean where an elliptical stylus starts to harden. Bass and fundamentals stay warm and controlled. This is the point where the Concorde stops being merely a good plug-and-play system and starts being a High-End cartridge that also happens to be practical. StereoNET credited the Bronze in January 2025 with a refined yet engaging sound and surprisingly deep insight into the recording – and awarded it the Applause Award.

Who is the Concorde Music Bronze suited for?

For anyone with a decent S-tonearm turntable and a chain that actually passes resolution through – a well-aligned Technics SL-1200 or comparable. Straight talk: on an entry-level deck and with a basic phono preamp, part of the Fine Line advantage evaporates; the Blue is enough there. But if you want to get the most out of Concorde's convenience without jumping straight to the Black's Shibata grind, this is exactly right.

Our verdict

The crossing into High-End: bare Fine Line stylus, more refinement and spatiality than the Blue, all with the familiar plug-and-play comfort. Not for nothing did the Bronze take 1st place among cartridges up to €500 in the 2025 Golden Ear reader poll (Audio/stereoplay) and also picked up the StereoNET Applause Award. For ambitious listeners with a chain that shows it off too.

Technical Data

Type: moving magnet cartridge (MM), Concorde design with integrated headshell
Stylus shape: bare Fine Line
Cantilever: aluminium
Generator: quad-coil with silver-plated coils
Output voltage: 6 mV (1 kHz, 5 cm/s)
Recommended tracking force: 1.8 g
Frequency response: 20–20,000 Hz
Channel separation: 26 dB at 1 kHz
Compliance: 15 µm/mN
Recommended load resistance: 47 kΩ
Recommended load capacitance: 150–300 pF
Mounting: SME/bayonet (S-shaped) tonearm, plug-and-play
Weight: 18 g
What's included: 1 Concorde system with pre-mounted stylus, stylus brush and rubber ring

Frequently Asked Questions

What does the Fine Line grind offer over elliptical?

A Fine Line stylus has a narrower, longer contact area and sits closer to the shape of the original cutting stylus. It pulls more information out of the groove, distorts less in the highs, and handles the problematic inner grooves more cleanly than an elliptical grind.

What distinguishes the Concorde Music Bronze from the Black?

Same housing, same quad-coil generator. The Bronze has a bare Fine Line stylus, the Black a bare Shibata. Shibata comes even closer to the cutting stylus and delivers still more high-frequency energy and finer transients. If you already own a Bronze, you upgrade to the Black with a simple stylus swap.

Which turntable suits the Concorde Music Bronze?

A good fit is an S-tonearm turntable with a bayonet mount and a chain that passes resolution through – for example a properly aligned Technics SL-1200 or comparable. Clicked in tool-free, ready to play instantly. Straight tonearms with a standard headshell (Rega, Pro-Ject) need a Concorde adapter, and a good phono preamp pays off noticeably with the Fine Line.

Why buy the Concorde Music Bronze from HD Zürisee?

Because we've lived High-End for a good three decades and give you an honest assessment of whether your chain even makes the Fine Line advantage audible – or whether the Blue is plenty. No sales pressure, instead an open recommendation, and if you'd like, Mauri aligns the system properly on your tonearm.