Dual Drive Belt BELT CS505, Spare Part for Turntables

The Dual drive belt BELT CS505 is the matching spare part for the Dual turntables CS 130, CS 505 and other CS models and brings a worn-out belt back to its nominal size.

A tired belt doesn't remember anything good: it stretches, the speed fluctuates, and the music fluctuates along with it. That is the good news, because the repair costs little.

Why this replacement belt?

The drive belt is the wear part of every belt-drive turntable. After years it gets longer, glossy or snaps, and the platter runs out of round or starts hesitantly. This belt measures 112.0 × 0.60 × 5.00 mm and is intended for a long list of older Dual models. The length is decisive here: a belt that is too long slips, one that is too short strains the bearing.

What you get

A Dual drive belt measuring 112.0 × 0.60 × 5.00 mm. Important for the model numbers: it fits the 506-1, but not the 506. The 506 needs the BELT CS KLASSIK.

Who is this belt for? (and who is it not for – plain talk)

For owners of one of the models listed below whose speed stability is declining. For CS 329, 418, 429 and 518 the BELT CS418/429/518 is the right one, for many older models the BELT CS, for 506, 502 and co. the BELT CS KLASSIK. So check your exact model; if in doubt, we will tell you the right one.

Our verdict

A small spare part that often gets an older Dual deck reliably up to speed again without much effort, provided it is the right one.

Technical data

• Dimensions: 112.0 × 0.60 × 5.00 mm
• Fits: Dual CS 130, 505, 505-1, 505-2, 505-3, 505-4, 506-1 (not 506!), 508, 522, 528, 1254, 1256, 1257, 1268
• Scope of delivery: 1 drive belt

Frequently asked questions

Which Dual models does the BELT CS505 drive belt fit?

Dual CS 130, 505, 505-1, 505-2, 505-3, 505-4, 506-1, 508, 522, 528, 1254, 1256, 1257 and 1268. The size is 112.0 × 0.60 × 5.00 mm. Caution: the 506 without suffix is not included.

Does the belt also fit the Dual CS 506?

No. The BELT CS505 fits the CS 506-1, not the CS 506. The CS 506 needs the Dual drive belt BELT CS KLASSIK. Check your unit to see whether there is a -1 after the number.

How do I know which Dual belt I need?

By the exact model of your deck. BELT CS505 (112 mm), BELT CS KLASSIK (176 mm), BELT CS (161 mm) and BELT CS418/429/518 (193 mm) differ in length. Tell us your model and we will confirm the right one.

Can I change the belt myself?

On most models yes, with a bit of finesse. If you are unsure, our technician Mauri will do the change directly in our shop in Wädenswil.

Why buy the Dual drive belt from HD Zürisee?

Because we know the model family and tell you which of the four Dual belts fits your deck. If needed we do the installation properly right away. Call 044 680 22 00 or send a WhatsApp message to 076 534 22 00 (text only, no calls).

Goes well with

You will find more spare parts and care accessories in the Turntable Accessories collection, and with the Dual turntables you can see the current model family.