Argon Audio Malmö Sub 10 Active Subwoofer, White (Each)
Argon Audio Malmö Sub 10 Active Subwoofer, White (Each)
Couldn't load pickup availability
The Argon Audio Malmö Sub 10 in White is an active subwoofer with a 25 cm long-throw driver and a built-in Class D amplifier, its bass-reflex cabinet working down to 37 Hz. It brings depth to bright living spaces where a dark cabinet would look out of place.
Why the Malmö Sub 10 in White?
Let's be honest: most subwoofers aren't rejected for their looks, but for their colour. White elegantly solves that in many homes. Underneath, it's the same build as the other finishes – 100 watts RMS, 200 watts peak, a 25-centimetre driver and a bass-reflex port at the base of the cabinet.
What you get
A unit that, once placed, wants to be left largely alone. Signal via RCA, power via the included power cable, fine-tuning via three controls – after that, the Sub 10 switches itself on and off. The removable fabric cover is included; without it, the white driver surround shows through.
Who is the Malmö Sub 10 in White suited for – and who isn't it for?
Honestly: if you're after a wireless system that manages without a cable to the amplifier, you won't be happy here – the connection runs via RCA, there's no wireless on board. If you have a bright, open living space and want noticeable deep bass there, this finish offers an unobtrusive, robust solution.
Our verdict
Plenty of cone area, little fuss, and a colour that rarely clashes in modern homes. If you value visible depth and can do without wireless transmission, you'll go wrong little with the Sub 10 in White. For the finer points – location, crossover, level – we're here: HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp 076 534 22 00 (text only, no calls).
Technical data
- Type: Active subwoofer with built-in Class D amplifier
- Driver: 25 cm (10″) long-throw woofer
- Amplifier power: 100 W RMS / 200 W peak
- Frequency range: 37–180 Hz (−3 dB)
- Crossover frequency: adjustable 35–120 Hz
- Phase: switchable 0°/180°
- Cabinet principle: Bass reflex, downward-firing port
- Cabinet material: MDF
- Input: 1× RCA, line/LFE level
- High-level input: not available
- Output: not available (no pass-through output)
- Controls: level, crossover frequency, phase
- Auto standby: yes, auto-on with signal, under 0.5 W in standby
- Finish: White
- Dimensions (W×H×D): 32 × 32.9 × 35 cm
- Weight: 12.4 kg
- Included: subwoofer, removable fabric front cover, power cable (RCA cable not included)
Frequently asked questions
Can the Malmö Sub 10 connect wirelessly to the amplifier?
Not out of the box. The Sub 10 has only an analogue RCA input and no wireless module. A wireless connection would need a separate transmitter-receiver set between amplifier and subwoofer. We're happy to tell you whether that's worthwhile in your case or whether a cable remains the better solution.
How far up can I turn the level control?
Start at around a third and then adjust in small steps. A properly set subwoofer doesn't stand out as its own source while listening to music – you only notice it once you switch it off. If the bass becomes localisable or booms, the level or the crossover frequency is set too high.
Can I run two Malmö Sub 10 units together?
Only via the amplifier, not via the subwoofer itself: there's no pass-through output. If your AV receiver has two subwoofer outputs, or you use an RCA splitter, parallel operation works. Two subwoofers often smooth out the bass in a room noticeably – we're happy to look at that setup with you.
Why buy the Malmö Sub 10 in White from HD Zürisee?
Because a specialist shop is more than an order form: we know these units from everyday use, combine them into systems that actually work, and stay your contact if something needs adjusting later. Our technician handles delivery, setup and integration into your existing system on request.
Goes well with
It's worth browsing further: more subwoofers to compare, a matching amplifier with subwoofer output, or the full Argon Audio range.
Share
