IsoTek EVO3 Super Titan 32 A High-Current Mains Conditioner

The IsoTek EVO3 Super Titan 32 A is a high-current mains conditioner: a passive power cleaner that, according to IsoTek, is the most powerful audiophile mains conditioner in the world – built for the hungriest power amps there are.

Where normal power strips give up, the Super Titan 32 A delivers clean current without limit. Four independent high-current outlets supply power amps, monoblocks, active loudspeakers and subwoofers with low-impedance, filtered power – continuously at 32 amps.

Why the EVO3 Super Titan 32 A?

At its heart is IsoTek's proven Direct-Coupled circuit, combined with four seven-stage filter networks in a series-parallel arrangement. The result: up to 7,360 watts of continuous power and a transient reserve of 35,500 watts. In plain terms: even if your amp tries to briefly drain the whole wall for a timpani hit, the current is already there.

What you hear

A drastically lowered noise floor, a larger soundstage with more air between instruments, and bass that becomes deeper and more controlled at the same time. Because no two outlets are directly connected, differential-mode interference can't transfer from one device to the next.

Who is the Super Titan 32 A for? (and who it's not for — straight talk)

For power-hungry high-end power amps, large monoblocks and active systems that want to be powered without compromise. Straight talk: a 32 A supply line needs its own, correctly fused electrical circuit in the house. If you don't have that, or listen with more moderate power amps, the Super Titan 20 A works just as well – and saves you money too.

Our verdict

The heavyweight among mains conditioners – but a cultivated one. If you own power amps that scream for current, this gives you a low-impedance high-current supply with no compromise. Overkill for small systems, a revelation for large ones.

Technical data

• Type: passive high-current mains conditioner (Direct-Coupled)
• Outlets: 4 independent high-current outlets
• Continuous current: 32 A
• Continuous power: up to 7,360 W (230 V)
• Transient power: 35,500 W
• Filter: 4× seven-stage network in series-parallel arrangement, Direct-Coupled circuit
• KERP (Kirchhoff's Equal Resistance Path): equal power delivery at all outlets
• RFI reduction: approx. 85 dB, down to 5 Hz
• Surge protection: 135,000 A (sequential, with earth-fault protection)
• Connectors: locking Neutrik 32 A
• Resonance control: ISIS isolation system
• Internal wiring: silver-plated OCC copper, FEP dielectric
• System Link: yes (aux connection for Genesis / Super Nova)
• Dimensions (W × H × D): 500 × 300 × 500 mm
• Weight: on request
• Included: EVO3 Optimum mains cable

Frequently asked questions

What's the difference between the EVO3 Super Titan 32 A and the 20 A?

Identical architecture, more throughput. The 32 A delivers up to 7,360 W of continuous power instead of 4,600 W for the 20 A, runs continuously at 32 amps and uses locking Neutrik 32 A connectors. It needs its own 32 A supply line in the house.

Does the Super Titan 32 A need its own electrical circuit?

Yes. For the continuous 32 amps, a dedicated, correctly fused 32 A supply line in the house is needed. We check beforehand whether your electrical installation supports this – otherwise the Super Titan 20 A is the right choice.

Why buy the IsoTek EVO3 Super Titan 32 A at HD Zürisee?

Because we've been building entire high-end systems for decades and think through the installation with you: we tell you honestly whether your house wiring supports 32 A and which Titan fits your power amps. Advice in Wädenswil by appointment.

Goes well with

High-quality mains and signal cables and the rest of the IsoTek mains conditioners.