Wird der Canton GLE 30 S2 als Paar geliefert?

Ja, der angegebene Preis gilt für zwei Regallautsprecher – ein komplettes Stereo-Paar. Du bekommst beide Boxen mit magnetischen Stoffabdeckungen und Bedienungsanleitung und kannst sofort loslegen. So musst du nicht zweimal bestellen und hast direkt ein vollständiges Set zu Hause.

Braucht der GLE 30 S2 Lautsprecherständer?

Pflicht sind sie nicht, aber sie helfen. Auf Ohrhöhe und mit etwas Abstand zur Rückwand spielt der GLE 30 S2 offener und räumlicher. Im Regal oder auf dem Lowboard funktioniert er ebenfalls – etwas mehr Wandnähe bringt dann zusätzlichen Bass. Passende Ständer haben wir da.

Eignet sich der GLE 30 S2 fürs Heimkino?

Ja, sehr gut. Er lässt sich nahtlos mit der GLE-S2-Serie kombinieren – etwa GLE 50 Center S2 als Center und ein Power Sub für den Tiefgang. Als Front- oder Rear-Lautsprecher fügt er sich klanglich sauber ins Set ein, weil alle GLE-S2-Modelle dieselbe Treiber-Technik teilen.

Wie gross darf der Raum sein?

Der GLE 30 S2 fühlt sich in kleinen bis mittleren Räumen wohl, etwa 12 bis 25 m². In grösseren Zimmern oder bei Vorliebe für viel Pegel und Tiefbass ist ein Standlautsprecher der GLE-Serie die souveränere Wahl. Wir helfen dir bei der Einschätzung.

Warum den Canton GLE 30 S2 bei HD Zürisee kaufen?

Weil ein Kompaktlautsprecher erst mit der richtigen Aufstellung und dem passenden Verstärker sein volles Potenzial zeigt. Wir kennen die GLE-Serie aus der Praxis, beraten dich ehrlich, liefern und richten dein Paar ein – mit eigenem Techniker im Rücken.

1 9

Canton GLE 30 S2 Bookshelf Speaker, White (Pair)

CHF 698.00

Sale Sold out

Taxes included. Shipping calculated at checkout.

Preis pro Paar

Available from supplier stock – usually 1–3 days

Quantity

The Canton GLE 30 S2 is the largest compact speaker in the GLE series – a 2-way bookshelf speaker that packs grown-up Canton sound into a living-room-friendly cabinet.

A 174 mm woofer/midrange with an ATB diaphragm (Aluminium Titan Black) and the 25 mm AB tweeter with waveguide play from 38 to 40,000 Hz – punchy in the bass, clear in the mids, open in the highs. A slim 19 cm wide, delivered as a pair.

Why the Canton GLE 30 S2?

Because "compact" doesn't mean "small in sound" here. The 174 mm ATB driver uses the same diaphragm type as the large GLE floorstanding speakers – stiff, light, low in distortion. Add to that the AB tweeter with waveguide, which radiates cleanly even when you're not sitting exactly on-axis. With 89 dB efficiency and 4–8 ohms it's uncomplicated: a normal stereo or AV amplifier is entirely enough. The rear-facing bass reflex port (backfire) gives you flexibility in placement.

What you get

2-way bass reflex with rear-facing resonator (backfire)
174 mm ATB woofer/midrange for controlled bass and clear mids
25 mm AB tweeter with waveguide, brilliant highs up to 40,000 Hz
38–40,000 Hz, 89 dB efficiency – easy to drive
Nominal/music power handling 90 / 140 W, impedance 4–8 Ω
A slim 19 cm front, magnetically attached fabric cover
Delivered as a pair

Who is the Canton GLE 30 S2 for?

Honestly: the GLE 30 S2 pays off if you want big sound without placing a floorstanding speaker in your living room – as a stereo pair on stands, on a shelf, or as a rear channel in a home cinema. If you want to fill an entire hall with deep bass, you'll need a floorstanding speaker or subwoofer alongside it. For everything else, it's a little powerhouse.

Our verdict

Dynamic in its attack, honest in its tuning, fair in price. Our team – Andy, in the industry since 1993 – listens with you on site to check whether the pair delivers enough bass standing freely on a shelf, and finds the matching amplifier to go with it. HD Zürisee in Wädenswil has stood for exactly this kind of honest, unfussy advice for years.

Technical data – Canton GLE 30 S2

Type: bookshelf speaker (largest compact model in the GLE series)
Acoustic principle: 2-way bass reflex (backfire resonator)
Woofer/midrange: 174 mm Aluminium Titan Black (ATB)
Tweeter: 25 mm aluminium black dome with waveguide
Frequency response: 38–40,000 Hz
Crossover frequency: 3,000 Hz
Efficiency (2.83 V/1 m): 89 dB
Nominal/music power handling: 90 / 140 W
Nominal impedance: 4–8 Ω
Connection: screw terminal, banana-plug compatible
Finish: white (decor, silky matte lacquered front)
Dimensions (W×H×D): 19 × 36 × 27 cm
Weight: 6.4 kg each
Scope of delivery: pair of GLE 30 S2 in white, speaker feet, magnetic fabric covers, instruction manual

Frequently asked questions

Is the Canton GLE 30 S2 delivered as a pair?

Yes, the listed price is for two bookshelf speakers – one complete stereo pair. You get both boxes with magnetic fabric covers and instruction manual, and can start right away. That way you don't have to order twice and have a complete set at home immediately.

Does the GLE 30 S2 need speaker stands?

They're not mandatory, but they help. At ear height and with some distance from the back wall, the GLE 30 S2 plays more openly and spaciously. It also works on a shelf or on a low sideboard – a bit closer to the wall then adds extra bass. We have matching stands.

Is the GLE 30 S2 suitable for home cinema?

Yes, very well. It combines seamlessly with the GLE S2 series – for instance the GLE 50 Center S2 as a centre channel and a Power Sub for the low end. As a front or rear speaker it fits sonically into the set, because all GLE S2 models share the same driver technology.

How large can the room be?

The GLE 30 S2 feels at home in small to medium rooms, around 12 to 25 m². In larger rooms or if you prefer high levels and deep bass, a floorstanding speaker from the GLE series is the more capable choice. We'll help you assess it.

Why buy the Canton GLE 30 S2 from HD Zürisee?

Because a compact speaker only shows its full potential with the right placement and the right amplifier. We know the GLE series from real-world practice, advise you honestly, deliver and set up your pair – with our own technician backing us up.