Passt der Floor Stand 1 auch zum Leica Cine Compact 1?

Ja, der Leica Floor Stand 1 passt sowohl zum Cine Play 1 als auch zum kompakteren Cine Compact 1. Beim Cine Compact 1 liegt das nötige Adapterstück für den Standfuss bereits im Karton. So bekommst du für beide Leica-Laser-Beamer dieselbe elegante, freistehende Aufstellung.

Wie hoch steht der Beamer auf dem Standfuss?

Der Floor Stand 1 selbst ist 656 mm hoch, der Beamer sitzt entsprechend etwas darüber. Das ist eine typische Höhe für die Projektion von einem Sideboard- oder Sofa-Niveau aus auf Leinwand oder Wand. Den genauen Winkel stellst du über die Neigung des Beamers im Bügel ein.

Sieht man beim Standfuss ein Stromkabel?

Nein, bei beiden Leica-Beamern nicht. Die Montageplatte hat integrierte Pin-Kontakte, über die der Strom durch den Fuss zum Beamer geführt wird – beim Cine Play 1 genauso wie beim Cine Compact 1. Das Kabel verläuft unten an der Basisplatte, der Projektor oben bleibt frei von sichtbaren Leitungen.

Kann ich das Netzteil des Cine Play 1 auch für den Cine Compact 1 verwenden?

Nein, auf keinen Fall. Die Netzteile beider Beamer haben zwar denselben Stecker und passen an denselben Standfuss, liefern aber unterschiedliche Stromstärken. Verwende immer nur das Netzteil, das mit deinem Beamer geliefert wurde – ein vertauschtes Netzteil kann den Beamer beschädigen. Im Zweifel sprich uns an, bevor du etwas einsteckst.

Ist der Standfuss beim Leica-Beamer dabei?

Nein, weder der Cine Play 1 noch der Cine Compact 1 wird mit Standfuss geliefert. Der Floor Stand 1 ist separat erhältlich. Du kannst ihn gleich zusammen mit dem Beamer bestellen oder später nachrüsten, wenn du merkst, dass die Aufstellung auf dem Möbel doch nicht die ideale Lösung ist.

Warum den Leica Floor Stand 1 bei HD Zürisee kaufen?

Weil wir nicht nur den Fuss liefern, sondern mit dir klären, wo im Raum Beamer, Leinwand und Sitzplatz zusammenpassen. Als autorisierter Fachhändler kennen wir die Leica-Beamer im Detail, wickeln die Garantie korrekt ab und übernehmen auf Wunsch Lieferung, Montage und Einrichtung bei dir zu Hause.

1 5

Leica Floor Stand 1 Projector Stand (Each)

CHF 425.00

Sale Sold out

Taxes included. Shipping calculated at checkout.

Available from supplier stock – usually 1–3 days

Quantity

The Leica Floor Stand 1 is a design stand for Leica home cinema projectors that places the projector freestanding in the room at around 66cm height – suits both the Leica Cine Play 1 and the Leica Cine Compact 1.

A projector on the sideboard, a stack of books next to it for height adjustment, and a cable mess behind it – we've all seen it. With the Floor Stand 1, the makeshift setup becomes a piece of furniture: a slim column, a round base plate, all in the same colour as the Leica projectors. The projector sits where the picture is best, not wherever there happened to be space.

Why the Floor Stand 1?

Because the right height and the right distance to the screen play a part in picture quality. The stand brings the lens to a height where the projector can work without heavy keystone correction – letting the full Leica optics deliver their sharpness right into the corners of the image. Then there's optics in the other sense: Leica deliberately built the stand as a design object. It's meant to be seen, not hidden.

What you get

A sturdy column weighing 5.7kg with a base plate 331mm in diameter – heavy enough that nothing wobbles, slim enough for the living room. On top sits a mounting plate with integrated pin contacts: power runs through the stand via these, eliminating visible cables at the projector – for both the Cine Play 1 and the Cine Compact 1. The projector can be tilted in its bracket, so you can find the right angle to the screen or wall. Assembly takes just a few minutes – Allen keys are included.

Who's the Floor Stand 1 for?

For anyone who owns or plans to buy a Leica Cine Play 1 or Cine Compact 1 and wants to place it freestanding in the room – no ceiling mount, no drilling, no rearranging furniture. Also ideal in rented flats where the ceiling is off-limits. Straight talk: if you're mounting your projector permanently on the ceiling or keeping it on a shelf anyway, you don't need the stand. And it's not meant for other manufacturers' projectors – the mount is matched specifically to the Leica models.

Our verdict

The Floor Stand 1 is one of those rare accessories you don't just buy because you have to. It solves the placement problem elegantly and makes the projector look as if it never wanted to stand anywhere else. At HD Zürisee in Wädenswil, we're happy to advise you on where in the room the stand with your Leica projector delivers the best picture – call us, write to us, or get in touch via WhatsApp.

Technical data

Type: stand for home cinema projectors
Compatible with: Leica Cine Play 1, Leica Cine Compact 1 (adapter piece included with the Cine Compact 1)
Height: 656mm
Base plate: Ø 331mm
Dimensions (W×H×D): 331 × 656 × 331 mm
Weight: 5.7 kg
Power routing: integrated pin contact system in the mounting plate, for Cine Play 1 and Cine Compact 1 (each with its own projector's power supply)
Important: don't mix up the Cine Play 1 and Cine Compact 1 power supplies – same plug, but different current rating
Assembly: two variants (stand upright, or projector mounted upside down on the stand)
Colour: silver-grey
What's included: column with connecting elements, base plate, 2× M6 screw, 1× M8 screw, one Allen key each for M6 and M8

Frequently asked questions

Does the Floor Stand 1 also fit the Leica Cine Compact 1?

Yes, the Leica Floor Stand 1 fits both the Cine Play 1 and the more compact Cine Compact 1. For the Cine Compact 1, the necessary adapter piece for the stand is already included in the box. That gives you the same elegant, freestanding setup for both Leica laser projectors.

How high does the projector sit on the stand?

The Floor Stand 1 itself is 656mm tall, with the projector sitting a bit above that. This is a typical height for projecting from sideboard or sofa level onto a screen or wall. You set the exact angle by tilting the projector in its bracket.

Is a power cable visible at the stand?

No, not with either Leica projector. The mounting plate has integrated pin contacts that route power through the stand to the projector – for both the Cine Play 1 and the Cine Compact 1. The cable runs at the bottom of the base plate, keeping the projector on top free of visible cables.

Can I also use the Cine Play 1's power supply for the Cine Compact 1?

No, absolutely not. Both projectors' power supplies have the same plug and fit the same stand, but deliver different current ratings. Always use only the power supply that came with your projector – a swapped power supply can damage the projector. When in doubt, ask us before plugging anything in.

Is the stand included with the Leica projector?

No, neither the Cine Play 1 nor the Cine Compact 1 is supplied with a stand. The Floor Stand 1 is available separately. You can order it together with the projector right away, or add it later if you find that placing it on furniture isn't the ideal solution after all.

Why buy the Leica Floor Stand 1 at HD Zürisee?

Because we don't just deliver the stand, we work out with you where in the room the projector, screen, and seating come together. As an authorised dealer, we know the Leica projectors in detail, handle the warranty correctly, and take care of delivery, assembly, and setup at your home on request.

Goes well with

The matching projector: Leica Cine Play 1 and Cine Compact 1 in our Leica overview. For the right cinema sound: soundbars or an AV receiver. More home cinema accessories can be found under home cinema accessories.