Dynavox CSP130 Carbon Fibre Anti-Static Brush

The Dynavox CSP130 is a carbon fibre anti-static brush that lifts dust out of the groove and discharges the record's static charge in the same pass.

Two rows of fine carbon fibres dip into the groove, with an integrated velvet pad in between for surface dust. Set it down once, turn it around once, done – no liquid, no waiting, no ritual with three cloths.

Why the Dynavox CSP130?

Because dust in the groove costs you twice: it's audible, and it's abrasive. Carbon fibres handle both in one pass – fine enough to reach into the groove, and conductive enough to drain off the charge that otherwise turns your record into a magnet for every dust bunny in the room. The velvet pad between the fibre rows picks up whatever sits on the surface at the same time. Two tools, one handle.

What you get

A handy brush 110 millimeters long with a double row of carbon fibres and the velvet pad in between – not a separate puck, but a second cleaning surface built into the same tool. Plus a mount for screwing in place, so the brush hangs within reach wherever you need it, instead of drifting into the drawer with the loose batteries.

Who is the CSP130 for?

For anyone willing to invest ten seconds before every play – and that's exactly where real vinyl care begins. Straight talk: flea-market finds with baked-in finger grease won't get clean with this; that needs a wet cleaning. And you're better off mounting the screw bracket to the rack or the wall than to a sensitive acrylic chassis.

Our verdict

The most unassuming tool on the record shelf, with the biggest everyday payoff. Use the CSP130 consistently and you'll hear less crackle and change your stylus less often. Nowhere else in vinyl care do you get this much effect per gesture.

Technical Data

• Type: Carbon fibre anti-static brush with integrated velvet pad
• Bristles: two rows of anti-static carbon fibres
• Cleaning surface: velvet pad between the fibre rows
• Dimensions (L × W × H): 110 × 30 × 30 mm
• Weight: approx. 50 g
• Use: dry cleaning before playback
• Mounting: screw-on bracket
• Included: brush, bracket for permanent mounting

Frequently Asked Questions

How do I clean the CSP130's velvet pad?

Wipe the dust off against the nap, ideally with a fingernail or a paper towel. Do this regularly, or you'll transfer the previous record's dirt onto the next one. A clean pad noticeably works better than one that's already seen half your collection.

Is the CSP130 enough on its own, or do I also need wet cleaning?

For the daily routine, it's enough. The CSP130 removes loose dust and static charge, and doesn't aim to do more. Grease, nicotine film, or old second-hand grime sit deeper in the groove – for that, only a cleaning fluid with a cloth will help. Dry first, wet only when needed.

Can I use the brush while the platter is spinning?

Yes, that's actually the most convenient way. Lay the brush flat while the platter is running and hold it still for one or two revolutions, then draw it slowly off toward the edge. Don't press – the fibres' own weight is entirely sufficient.

Why buy the Dynavox CSP130 at HD Zürisee?

Because vinyl care is a chain, and we'll tell you where your weakest link sits. At HD Zürisee in Wädenswil, we look at your routine instead of packing you off with half the accessory shelf. Call us at 044 680 22 00 or message us on WhatsApp at 076 534 22 00 (text only, no calls).

Pairs well with

For the wet complement to the dry brush, check out Record Cleaning; everything about your turntable is in Turntable Accessories.