Line Magnetic LM-300IA 300B Integrated Amplifier
Line Magnetic LM-300IA 300B Integrated Amplifier
Couldn't load pickup availability
The Line Magnetic LM-300IA is a single-ended integrated amplifier in pure Class A with 300B output tubes and 2×10 watts of output power.
Why the LM-300IA?
Among tube lovers, the 300B is considered one of the most musical output tubes there is. The LM-300IA runs it in pure Class A, can also be used as a pure power amp thanks to a subwoofer output, and brings along a piece of tube tradition with 274B rectifier tubes.
What you hear
Ten watts sounds like little, but with the right speakers it isn't: Class A 300B delivers fine resolution and a warm, organic tone that makes many solid-state amplifiers look old-fashioned.
Who is the LM-300IA for? (and who it isn't)
For listeners with highly efficient speakers – horn or full-range systems – in moderately sized rooms. Straight talk: with normal speakers at around 85 dB sensitivity in a large living room, 10 watts gets tight – check your speakers' sensitivity beforehand, we're happy to help.
Our verdict
An amplifier for connoisseurs who know what a few, but good, watts are enough for.
Technical specifications
- Circuit design: tube integrated amplifier, single-ended, pure Class A
- Output power: 2× 10 W
- Tube complement: 2× 300B, 2× 12AT7, 1× 6SL7, 2× 274B (rectifier)
- Frequency response: 20 Hz – 50 kHz (-1.5 dB)
- THD: 2% (1 kHz)
- Signal-to-noise ratio: 87 dB
- Input sensitivity: 200 mV
- Input impedance: 100 kΩ
- Speaker outputs: 4 Ω / 8 Ω / 16 Ω
- Subwoofer output: yes
- Inputs: 3× RCA (line)
- Dimensions (W×H×D): 430 × 217 × 365 mm
- Weight: 34 kg
Frequently asked questions
Is the LM-300IA enough for normal speakers?
We recommend it without reservation only for high sensitivity from about 90 dB upward. At lower sensitivity, we'd rather advise you toward a more suitable model.
Can I use the LM-300IA as a pure power amp?
Yes, using an external preamp and the corresponding input, it can also be run as a power amp.
Does the LM-300IA have a subwoofer output?
Yes, a dedicated output for an active subwoofer is provided.
Does the LM-300IA have a headphone output?
No.
Why buy the LM-300IA at HD Zürisee?
We check together with you whether your speakers match the LM-300IA's low wattage needs – honestly, even if the answer is sometimes a different model.
Pairs well with
You'll find high-sensitivity models in our speaker collection – ask us specifically about horn or full-range speakers.
Share
Prev/Next products
kondasoft.product.prev_product
kondasoft.product.next_product
