Eversolo AMP-F10 Stereo Power Amplifier

The Eversolo AMP-F10 is a Class-AB stereo power amplifier delivering 2 × 200 watts into 8 ohms. It connects to a streamer, DAC or preamp via XLR or RCA and can be bridged as a mono amp when needed.

It is the larger of the two Eversolo powerhouses, with a 1000-watt linear power supply and a VU meter window in the front panel.

Why the AMP-F10?

Because it bridges the gap between streamer and speakers when an integrated amplifier doesn't give you enough headroom. 200 watts per channel into 8 ohms, 320 watts into 4 ohms and 650 watts bridged are enough even for demanding speakers. With a 113 dB signal-to-noise ratio and 0.008 % THD+N, it stays clean in the signal path according to the manufacturer. A 1000-watt linear power supply provides the reserves.

What you hear

A power amplifier should above all do one thing: add nothing and drive the speakers in a controlled way. The power reserves help especially in dynamic passages and with speakers that demand current. How it works together with your room is best judged by you.

Who is the AMP-F10 for?

For anyone who wants to connect a streamer and speakers with a separate power amp, for example with the DMP-A10 or the DAC-Z10 as preamp. Plain and simple: the AMP-F10 has neither a volume control nor source selection. If you are looking for one device that does it all, look at the Eversolo Play or an integrated amplifier.

Our verdict

The AMP-F10 is a powerful, well-equipped power amplifier for demanding stereo systems. It fits into the Eversolo family and can also be combined with other sources. We are happy to discuss with you in Wädenswil which speakers suit it.

Technical data

• Device type: Stereo power amplifier, Class AB
• Output power: 2 × 200 W into 8 Ω, 2 × 320 W into 4 Ω, 2 × 450 W into 2 Ω
• Output power bridged: 650 W into 8 Ω, 950 W into 4 Ω
• Gain: switchable 23 dB or 29 dB
• Input sensitivity: XLR 5.2 V (23 dB) or 2.4 V (29 dB), RCA 2.65 V (23 dB) or 1.3 V (29 dB)
• Inputs: XLR, RCA
• Signal-to-noise ratio: 113 dB
• Distortion (THD+N): 0.008 %
• Damping factor: > 600
• Power supply: Linear power supply, 1000 W
• Display: VU meter
• Dimensions (W × H × D): 430 × 147 × 310 mm
• Weight: 18 kg

Frequently asked questions

How much power does the Eversolo AMP-F10 have?

The AMP-F10 delivers 2 × 200 watts into 8 ohms and 2 × 320 watts into 4 ohms. Bridged as a mono amp it delivers 650 watts into 8 ohms. That lets it drive even large floorstanding speakers with ease.

Which inputs does the AMP-F10 have?

It has XLR and RCA inputs. So you connect it balanced or unbalanced to a streamer, DAC or preamp. It has no volume control; the source takes care of that.

Does the AMP-F10 go well with the DMP-A10 or DAC-Z10?

Yes, both devices have variable outputs and can be connected directly to the power amp. The combination makes sense because the sources bring a preamp with them. We advise you on the exact cabling.

Can I run the AMP-F10 as a mono amp?

Yes, in bridged mode the amplifier delivers up to 650 watts into 8 ohms. For this you need two units for a stereo pair. Whether that makes sense for your speakers, we are happy to clarify in advance.

Why buy the Eversolo AMP-F10 from HD Zürisee?

Because we work out with you whether a power amp suits your speakers and sources before you buy. We tell you the delivery time honestly up front. Call +41 44 680 22 00, write to shop@hdzuerisee.ch or message us on WhatsApp at 076 534 22 00.

Goes well with

Matching streamers, the DAC-Z10 as preamp and more power amplifiers. You can find the whole range under Eversolo.