{"product_id":"clearaudionanophonov2bl","title":"Clearaudio Nano Phono V2 Phono Preamp, Black","description":"\u003cp\u003eThe Clearaudio Nano Phono V2 is a compact phono preamp for MM and MC cartridges with a continuously adjustable output level.\u003c\/p\u003e\n\u003cp\u003eIt closes the gap between your turntable and an amplifier that has no phono input, or only a half-hearted one. Mature sound in a footprint the size of a cigarette pack, hand-assembled in Erlangen.\u003c\/p\u003e\n\u003ch2\u003eWhy the Nano Phono V2?\u003c\/h2\u003e\n\u003cp\u003eShort signal paths, a solid aluminium housing against interference, and a stepless level control that lets you match the output precisely to the rest of your chain — up to 10 volts RMS is available, plenty of headroom even for a reluctant high-level input. Jumpers on the underside let the Nano run on both MM and MC systems, and that's also where you set the load impedance for moving coil cartridges. The switchable subsonic filter keeps the rumble from warped records out of the signal.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA fresh, dynamic reproduction with a clean background — 81 dB of signal-to-noise ratio in MM mode is a statement for this size of unit. Bass arrives controlled and punchy, voices and cymbals stay clearly outlined. The Nano colours little: it lets the character of your turntable and cartridge come through, rather than painting over it.\u003c\/p\u003e\n\u003ch3\u003eWho is the Nano Phono V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone setting up their first proper turntable — and for anyone who needs a compact phono stage because there's simply no room left in the rack. To be blunt: for a high-end MC system, the Nano is a size too small; then the Smart Phono V2 or the Basic V2 is the way to go. And if you want to plug in headphones directly, get the headphone version — the Nano Phono V2 has no headphone jack.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small problem-solver with surprisingly few compromises: flexible enough for almost any cartridge, quiet enough for the softest passages, small enough for any shelf. If your amplifier's built-in phono input has left you underwhelmed so far, this is the least complicated way to change that.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Small and affordable, very flexible, spot-on both electrically and mechanically, sonically an engaging performer focused on the essentials.\"\u003c\/em\u003e — FIDELITY (Michael Vrzal), 2016\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamp for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ \/ 220 pF (MM), selectable via jumper (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e MM\/MC switchable via jumper on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.4 dB (20 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB (A) for MM \/ 70 dB (A) for MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.04%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 80 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e continuously adjustable, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e unbalanced RCA, ground terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable via jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.3 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 85 × 25 × 106 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 500 g (preamp with power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere do I connect the Nano Phono V2?\u003c\/h3\u003e\n\u003cp\u003eTo a free high-level input on your amplifier: AUX, CD, tuner or line. Never to an input already labelled \"Phono\" — the signal would be amplified a second time there, and the result would sound like anything but music.\u003c\/p\u003e\n\u003ch3\u003eMM or MC — how do I switch it?\u003c\/h3\u003e\n\u003cp\u003eVia the jumpers on the underside of the housing. That's also where you set the load impedance for moving coil systems and switch on the subsonic filter. Just tell us which cartridge you're running, and we'll give you the right jumper setting straight away.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the Nano Phono V2?\u003c\/h3\u003e\n\u003cp\u003eNo, the Nano Phono V2 has no headphone output and passes its signal only via RCA to your amplifier. If you want to listen directly through headphones, get the Clearaudio Nano Phono Headphone V2 with a built-in headphone amp and 3.5 mm jack.\u003c\/p\u003e\n\u003ch3\u003eWhat's the adjustable output level good for?\u003c\/h3\u003e\n\u003cp\u003eIt balances out cartridges and amplifiers with different output levels. The Nano delivers up to 10 volts RMS, steplessly adjustable downward. This lets you work in a sensible range of your volume control, instead of turning it up to the stop on the very first track.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Nano Phono V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage has to suit the system, not the other way round. We'll work out MM or MC, load impedance and subsonic filter with you before the unit is set up at your place — and our technician Mauri is on hand if anything sticks during setup. Call us: +41 44 680 22 00.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, and the right arm under \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. If you're thinking through the whole chain at once, browse \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989499179344,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-nano-phono-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846947","url":"https:\/\/hdzuerisee.ch\/en\/products\/clearaudionanophonov2bl","provider":"HD Zürisee AG","version":"1.0","type":"link"}