{"product_id":"clearaudio-concept-verify-tonarm-schwarz","title":"Clearaudio Concept Verify Aluminium Tonearm, Black","description":"\u003cp\u003eThe Clearaudio Concept Verify in black is a magnetic-bearing 9-inch radial tonearm with an armtube made of black anodised aluminium.\u003c\/p\u003e\n\u003cp\u003eInstead of running on points or ball bearings, the arm rides in a magnetic field. Because nothing touches, there's nothing to wear out, stick, or start to play up after a few years. A bearing you're allowed to forget about once it's installed.\u003c\/p\u003e\n\u003ch2\u003eWhy the Concept Verify?\u003c\/h2\u003e\n\u003cp\u003eBecause it brings Clearaudio's magnetic-bearing technology into the sensible middle of the range. The aluminium armtube resists twisting and carries a bit more mass than the carbon version – which suits cartridges that like a calm, full fundamental tone. Antiskating works contact-free via magnetic force, the Direct Wire Plus is permanently wired and factory-fitted with MPC RCA connectors. And the black finish visually disappears on dark turntables instead of cutting across them.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eAn arm that stays calm. The friction-free motion takes away the slight hardness that mechanical bearings like to put into the midrange; voices sit firm and steady, without wandering. The bass feels a touch more physical than its carbon sibling, while the treble is a little more restrained. Put on a record after work, then a second one, and what you'll notice most is that nothing gets on your nerves.\u003c\/p\u003e\n\u003ch3\u003eWho is the Concept Verify in black for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to fit a good turntable with a maintenance-free arm and prefers a slightly warmer character. Cartridges from 2.5 to 17 grams can be balanced, covering almost everything from a solid MM to a full-grown MC. Plain talk: if you're after maximum transparency and that last touch of air in the treble, the carbon version in silver is the smarter pick. And like every magnetic-bearing arm, this one prefers a stable surface over a springy wooden floor – on shaky ground, a wall mount helps more than any upgrade to the arm itself.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe unfussy entry into the friction-free world: no wear, no bearing maintenance, no re-alignment marathon after two years. The black aluminium version is the slightly earthier of the two and suits systems that already lean toward the analytical. Which of the two versions suits your cartridge better – we'll tell you honestly at HD Zürisee in Wädenswil, even when that's the cheaper one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e radial tonearm, 9 inch, with friction-free magnetic-bearing technology\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArmtube:\u003c\/strong\u003e aluminium, black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAntiskating:\u003c\/strong\u003e magnetic, contact-free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEffective length:\u003c\/strong\u003e 239.56 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting distance (pivot to spindle):\u003c\/strong\u003e 222 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOverhang:\u003c\/strong\u003e 17.56 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOffset angle:\u003c\/strong\u003e 24.16°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 305 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable cartridge weight:\u003c\/strong\u003e 2.5–17 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEffective mass:\u003c\/strong\u003e not specified by Clearaudio\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal cable:\u003c\/strong\u003e Clearaudio Direct Wire Plus (1.1 m), permanently wired, fitted with MPC RCA connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 450 g (incl. counterweight)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel no.:\u003c\/strong\u003e TA035\/concept\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2-year manufacturer's warranty from registration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e tonearm with permanently wired signal cable and counterweight; cartridge not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference to the silver carbon version?\u003c\/h3\u003e\n\u003cp\u003eThe armtube. This version uses black anodised aluminium, the silver one a carbon tube. The bearing, geometry and cable are identical, and the aluminium version weighs around ten grams more overall. Tonally, the black version gives the midrange a bit more substance, while the carbon version resolves the treble more finely.\u003c\/p\u003e\n\u003ch3\u003eDoes the magnetic bearing wear out over time?\u003c\/h3\u003e\n\u003cp\u003eNo. No parts touch inside the bearing, so there's no abrasion and no bearing play. There's also nothing to oil or re-adjust. Years later the arm still moves as freely as on day one – provided no dust or metal debris collects in the bearing gap.\u003c\/p\u003e\n\u003ch3\u003eWill the Concept Verify fit my turntable?\u003c\/h3\u003e\n\u003cp\u003eIf your turntable allows a mounting distance of 222 mm between the tonearm pivot and the platter spindle, it will fit. That's standard for Clearaudio and achievable on many other turntables too. Tell us the make and model, and we'll check the drilling, distance and required arm height before you order.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools to install it?\u003c\/h3\u003e\n\u003cp\u003eNo, but you'll need patience and an alignment protractor. It's mounted via the tonearm base, then overhang, tracking force and azimuth are set. If you're doing this for the first time, set aside a quiet hour. Alternatively, our technician Mauri takes care of it and delivers the arm fully set up.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Concept Verify from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you upfront which of the two versions suits your system – rather than just dropping the pricier one into your cart. Mauri handles mounting and alignment in Wädenswil, and we deal with warranty cases directly as an authorised Clearaudio dealer. You can reach us on +41 44 680 22 00, via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find a matching cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, and the turntable to go with it under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e. More arms are under \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e, and everything around the record itself is gathered under \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eall things vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989498655056,"sku":null,"price":1000.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-concept-verify-aluminium-tonarm-schwarz-seitenansicht.jpg?v=1785848132","url":"https:\/\/hdzuerisee.ch\/en\/products\/clearaudio-concept-verify-tonarm-schwarz","provider":"HD Zürisee AG","version":"1.0","type":"link"}