{"product_id":"avm-ovation-sa-8-3-stereo-endstufe-schwarz","title":"AVM Ovation SA 8.3 Stereo Power Amplifier, Black","description":"\u003cp\u003eThe AVM Ovation SA 8.3 is a single-ended stereo power amplifier with a tube input stage and a MOS-FET output stage, delivering over 2 × 420 watts at 4 ohms.\u003c\/p\u003e\n\u003cp\u003eA power amplifier has exactly one job: turning the preamplifier's signal into power. The SA 8.3 does this in a rigorous dual-mono design, tipping the scales at 42 kilograms – a unit you don't reposition twice, you place it right once.\u003c\/p\u003e\n\u003ch2\u003eWhy the Ovation SA 8.3?\u003c\/h2\u003e\n\u003cp\u003eBecause two design philosophies come together here. Ahead of the power amplifier sits a fully balanced input stage with AVM's own 803-T tube technology: two specially made double triodes that lend the signal warmth and smoothness. Behind it, 24 high-current MOS-FETs per channel take over in single-ended circuitry. AVM states over 2 × 230 watts at 8 ohms, over 2 × 420 watts at 4 ohms and over 2 × 700 watts at 2 ohms for it – figures that halve cleanly as the impedance does. Power comes from two 1000 VA toroidal transformers in a true dual-mono design, plus 200,000 microfarads of reservoir capacitance per channel, mounted directly on the output stage boards and about as close to the action as it gets. Short paths, large reserves – the rest is music.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA power amplifier with one RCA input on solid, gold-plated copper sockets and one XLR input – both are available, but only one is ever used –, plus the transparent Ovation glass lid that keeps the inner workings visible. An automatic on\/off function, an AIR trigger with a trigger input from +5 to +20 volts and a USB port for software updates are also included. A handheld remote isn't included – the SA 8.3 doesn't control volume, it follows the preamplifier. In this finish, it's delivered with a black anodised aluminium front.\u003c\/p\u003e\n\u003ch3\u003eWho is the Ovation SA 8.3 right for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the SA 8.3 is a pure power amplifier – no volume control, no sources, no streaming. It needs a preamplifier such as the Ovation PA 8.3, SD 8.3 or MP 8.3, and speakers that can make something of this power. Anyone looking for a compact all-in-one solution is in the wrong place. But anyone building an uncompromising pre-\/power-amp concept, who values tube warmth ahead of transistor power and has a rack that can bear 42 kilograms, will find one of the most assured power amplifiers in its class.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe SA 8.3 isn't simply the bigger SA 6.3, it's the other idea – and the more powerful one at that: roughly a fifth more power at 4 ohms, a stated 2 ohm value, a double power supply, double the weight and, of course, the tube at the input. What ultimately stands out is less the loudness than the composure – and that slight warmth transistors alone rarely manage. Once you've had that in your chain, you're reluctant to go back.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e single-ended stereo power amplifier, hybrid: tube input stage and MOS-FET output stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e \u0026gt; 2 × 230 W at 8 Ω, \u0026gt; 2 × 420 W at 4 Ω, \u0026gt; 2 × 700 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput stage:\u003c\/strong\u003e fully balanced, OVATION 803-T tube technology with 2 specially made AVM double triodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput stage:\u003c\/strong\u003e 24 high-current MOS-FETs per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e dual-mono, 2 × 1000 VA toroidal transformers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReservoir capacitance:\u003c\/strong\u003e 200,000 µF per channel, directly on the output stage boards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × RCA (solid gold-plated copper sockets), 1 × XLR – usable alternatively only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e 1.25 V \/ 20 kΩ (RCA), 1.25 V \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain factor:\u003c\/strong\u003e 30 (29.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e \u0026gt; 400 (8 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 5 Hz – \u0026gt; 35 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.02 % (25 W \/ 4 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermodulation:\u003c\/strong\u003e \u0026lt; 0.01 % (25 W \/ 4 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 94 dB(A) (25 W \/ 4 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise time:\u003c\/strong\u003e 10 µs (4 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlew rate:\u003c\/strong\u003e \u0026gt; 15 V\/µs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e transparent Ovation glass lid, automatic on\/off, AIR trigger (AVM Intelligent Remote), 3.5 mm trigger input for +5 to +20 V, USB update port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e none – not included, no volume control on the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge mode:\u003c\/strong\u003e not provided by AVM (for mono operation: Ovation MA 8.3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply (mains):\u003c\/strong\u003e 230 V, 50 Hz, max. power consumption 3500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption, no signal:\u003c\/strong\u003e 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby:\u003c\/strong\u003e \u0026lt; 0.5 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 432 × 253 × 420 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 42 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 4 years with registration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e power amplifier, mains cable, 3.5 mm trigger plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a preamplifier for the AVM Ovation SA 8.3?\u003c\/h3\u003e\n\u003cp\u003eYes. The SA 8.3 is a pure power amplifier with no volume control and no source inputs. It's run from a preamplifier, such as the AVM Ovation PA 8.3, the SD 8.3 or the MP 8.3, connected via RCA or XLR. Both inputs can be used but only alternatively, not at the same time.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the SA 8.3 and the SA 6.3?\u003c\/h3\u003e\n\u003cp\u003ePower and concept. AVM states over 2 × 230 watts at 8 ohms, over 2 × 420 watts at 4 ohms and over 2 × 700 watts at 2 ohms for the SA 8.3, while the SA 6.3 delivers 2 × 200 and 2 × 350 watts respectively. The 8.3 also adds the tube input stage with 803-T double triodes, a dual-mono power supply, 200,000 µF per channel and 24 instead of 20 MOS-FETs – at 42 instead of 21 kilograms.\u003c\/p\u003e\n\u003ch3\u003eCan the AVM Ovation SA 8.3 be bridged to mono?\u003c\/h3\u003e\n\u003cp\u003eNo. Bridge mode isn't described in the manual and isn't provided by AVM. Anyone wanting true mono operation should get the Ovation MA 8.3 mono power amplifiers – according to the manual, these are designed as bridged power amplifiers. So at AVM, the path to more power leads via separate monoblocks.\u003c\/p\u003e\n\u003ch3\u003eIs a remote control included with the SA 8.3?\u003c\/h3\u003e\n\u003cp\u003eNo. According to the manual, the scope of delivery comprises the power amplifier, mains cable and 3.5 mm trigger plug. It's operated on the unit or automatically via the AIR trigger, which wakes the power amplifier together with the preamplifier. The SA 8.3 has no volume control that would need a remote.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the AVM Ovation SA 8.3 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause 42 kilograms of power amplifier deserves advice and proper placement. At HD Zürisee in Wädenswil we match preamplifier, power amplifier and speakers to each other, and deliver and install with our own technician. Call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching preamplifier can be found under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003epreamplifiers\u003c\/a\u003e, more \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifiers\u003c\/a\u003e for comparison are in the overview. Add \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e with a real appetite, and the \u003ca href=\"\/en\/collections\/kabel\"\u003ecabling\u003c\/a\u003e in between.\u003c\/p\u003e","brand":"AVM","offers":[{"title":"Default Title","offer_id":52989489938768,"sku":"303113","price":19990.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/avm-ovation-sa-8-3-stereo-endstufe-schwarz-frontansicht.jpg?v=1785441049","url":"https:\/\/hdzuerisee.ch\/en\/products\/avm-ovation-sa-8-3-stereo-endstufe-schwarz","provider":"HD Zürisee AG","version":"1.0","type":"link"}