{"title":"Subwoofer Cables","description":"\u003cp\u003eA subwoofer cable connects the sub output of an amplifier or AV receiver to the subwoofer and carries the low-frequency signal.\u003c\/p\u003e\n\n\u003ch2\u003eWhy a good subwoofer cable?\u003c\/h2\u003e\n\u003cp\u003eThe subwoofer cable carries the low-frequency signal from the sub output (LFE\/pre-out) to the active subwoofer. Because this run often crosses the whole room, good shielding against hum and interference matters especially. Dedicated subwoofer cables are built for this and ensure a clean, quiet bass – instead of a hum creeping in through poorly shielded cable.\u003c\/p\u003e\n\n\u003ch2\u003eWhat matters\u003c\/h2\u003e\n\u003cp\u003eWhat matters is effective shielding, firmly seated RCA connectors, and sufficient length for the often greater distance to the sub. Some subwoofers want the signal on a single input, others on L and R – for that there are Y-cables. At HD Zürisee in Wädenswil we look at your subwoofer and the output of your receiver or amplifier and choose the right connection.\u003c\/p\u003e\n\n\u003ch2\u003eWho it's for – and straight talk\u003c\/h2\u003e\n\u003cp\u003eFor stereo as well as home-cinema setups with an active subwoofer – from the first sub in the living room to a multichannel system with a dedicated LFE channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e with a sub cable, shielding matters above all, not belief in miracles. A well-shielded cable of matching length keeps hum out – that's usually all it takes for clean bass. We choose based on length and connection, not on the price tag.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVerdict:\u003c\/strong\u003e good shielding, firm fit, matching length, and a Y-cable if needed – then the subwoofer plays quietly and hum-free. Tell us which sub and which output you have, and the connection will fit.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets a subwoofer cable apart from a normal RCA cable?\u003c\/h3\u003e\n\u003cp\u003eSubwoofer cables are designed for the often long runs and for good shielding against hum. Technically it's an RCA connection, but with a focus on interference resistance over greater distances. For the LFE path, that's the more sensible choice than a thin standard lead.\u003c\/p\u003e\n\u003ch3\u003eDo I need a Y-cable for the subwoofer?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the subwoofer: if it only has one LFE input, a simple cable is enough. If it wants the signal on L and R, you use a Y-cable. Tell us the model, and we'll assign the right variant.\u003c\/p\u003e\n\u003ch3\u003eHow long can a subwoofer cable be?\u003c\/h3\u003e\n\u003cp\u003eBecause the sub is often positioned far away, greater lengths are normal and unproblematic, as long as the shielding is good. More important than short runs is that the cable is well shielded and firmly plugged in. If you need a particular length, we'll find the right one.\u003c\/p\u003e\n\u003ch3\u003eWhich output does the subwoofer connect to?\u003c\/h3\u003e\n\u003cp\u003eOn AV receivers, to the sub or LFE output; on stereo amplifiers, to a pre-out or sub-out, if present. If your amplifier has no such output, there are other ways – we'll clarify that based on your devices.\u003c\/p\u003e\n\u003ch3\u003eDo I need an expensive subwoofer cable?\u003c\/h3\u003e\n\u003cp\u003eNo. What matters is good shielding and a firm fit, not the price. A solid, correctly shielded cable of matching length reliably does its job. We advise you based on need, not the price tag.\u003c\/p\u003e\n\u003ch3\u003eWhy buy subwoofer cables at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we look at the subwoofer and the output together and tell you whether a simple cable or a Y-cable fits, and what length you need. That way the bass plays cleanly and hum-free. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What sets a subwoofer cable apart from a normal RCA cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Subwoofer cables are designed for the often long runs and for good shielding against hum. Technically it's an RCA connection, but with a focus on interference resistance over greater distances. For the LFE path, that's the more sensible choice than a thin standard lead.\"}},{\"@type\":\"Question\",\"name\":\"Do I need a Y-cable for the subwoofer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on the subwoofer: if it only has one LFE input, a simple cable is enough. If it wants the signal on L and R, you use a Y-cable. Tell us the model, and we'll assign the right variant.\"}},{\"@type\":\"Question\",\"name\":\"How long can a subwoofer cable be?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because the sub is often positioned far away, greater lengths are normal and unproblematic, as long as the shielding is good. More important than short runs is that the cable is well shielded and firmly plugged in. If you need a particular length, we'll find the right one.\"}},{\"@type\":\"Question\",\"name\":\"Which output does the subwoofer connect to?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"On AV receivers, to the sub or LFE output; on stereo amplifiers, to a pre-out or sub-out, if present. If your amplifier has no such output, there are other ways – we'll clarify that based on your devices.\"}},{\"@type\":\"Question\",\"name\":\"Do I need an expensive subwoofer cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. What matters is good shielding and a firm fit, not the price. A solid, correctly shielded cable of matching length reliably does its job. We advise you based on need, not the price tag.\"}},{\"@type\":\"Question\",\"name\":\"Why buy subwoofer cables at HD Zürisee?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because we look at the subwoofer and the output together and tell you whether a simple cable or a Y-cable fits, and what length you need. That way the bass plays cleanly and hum-free. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\"}}]}\u003c\/script\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers \u0026amp; Subwoofers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/av-receiver\"\u003eAV Receivers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/cinchkabel\"\u003eRCA Cables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/kabel\"\u003eAll Cables \u0026amp; Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"audioquest-black-lab-subwoofer-kabel","title":"AudioQuest Black Lab Subwoofer Cable","description":"\u003cp\u003eThe AudioQuest Black Lab is a subwoofer cable with solid Long-Grain Copper conductors in balanced coax geometry, supplied with a ground wire against hum loops.\u003c\/p\u003e\n\n\u003cp\u003eIt's built for the run that's the longest in almost every living room: from the amplifier or AV receiver right across the room to the subwoofer. That's exactly where a thin bundled cable picks up everything that's out there in the way of interference.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Black Lab?\u003c\/h2\u003e\n\u003cp\u003eThe construction is balanced coax: the positive and negative conductors are made identically, so the shield never has to double as a signal conductor on the side. Both conductors are solid Long-Grain Copper, surrounded by nitrogen-foamed polyethylene – air is the best dielectric money can't buy. A metal-layer noise-dissipation system reflects high-frequency interference before it reaches the ground plane of the electronics. The RCA connectors are cold-welded instead of soldered, so there's no solder joint in the signal path.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA single mono cable with RCA connectors on both ends, in seven lengths from 2 to 20 metres. Included is a separate ground wire with cable lugs – the small wire that solves a hum problem before it becomes a case for the technician.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Black Lab suitable for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eTo be blunt: a subwoofer cable carries a band-limited signal, usually below around 120 Hertz. Frequency response isn't the issue here – any cable can manage that. What matters are two other things, and they concern long runs in particular: interference resistance and ground connection. Between the amplifier and subwoofer hang two devices on two power outlets; hum loops and picked-up high frequency are the norm here, not the exception. A continuously shielded cable with proper geometry and the included ground wire clean up exactly this problem. The Black Lab isn't necessary if your subwoofer sits right next to the amplifier and nothing hums anyway. It's very worthwhile as soon as the sub sits on the other side of the room – and essential if you already know that dull mains hum coming out of the sub.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Black Lab is the sensible base equipment for the run to the subwoofer: correctly built, correctly shielded, with a ground wire in the box. Measure your run and call us, then we'll find the right length – HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e subwoofer cable, mono (single cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductors:\u003c\/strong\u003e solid, Long-Grain Copper (LGC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeometry:\u003c\/strong\u003e balanced coax with identical positive and negative conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e nitrogen-foamed polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise dissipation:\u003c\/strong\u003e metal-layer Noise-Dissipation System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Cinch\/RCA, cold-welded, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectionality:\u003c\/strong\u003e direction-controlled, arrow points towards the subwoofer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 2 \/ 3 \/ 5 \/ 8 \/ 12 \/ 16 \/ 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e one subwoofer cable, separate ground wire with cable lugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the included ground wire for?\u003c\/h3\u003e\n\u003cp\u003eIt connects the chassis ground of amplifier and subwoofer, thereby eliminating hum from a ground loop. It's only connected when needed, at the ground terminals provided for that purpose. If nothing hums for you, just leave the wire in the box. Ask us if you can't find the terminal.\u003c\/p\u003e\n\u003ch3\u003eHow long can a subwoofer cable be?\u003c\/h3\u003e\n\u003cp\u003e20 metres is uncritical for this signal, which is why the range goes that far. What matters more is that you measure generously: along the skirting board, around door frames, with a bit of margin. Buying too short is more annoying than being a metre too long. In-between lengths we sort out with the distributor.\u003c\/p\u003e\n\u003ch3\u003eWhat do cold-welded connectors bring?\u003c\/h3\u003e\n\u003cp\u003eIn cold welding, the contact is made under high pressure instead of with solder. That means no extra metal alloy sits in the signal path, and the connection ages less. The contacts are gold-plated anyway, which keeps them oxidation-free for years. The advantage is structural, not sonic in nature.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Black Lab at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we ask about the placement first, not the budget. The right cable usually follows almost automatically from the length, the routing, and the connection type of your subwoofer. Our team in Wädenswil also helps with hum problems even when the cause lies elsewhere.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe rest of the low-frequency department: active models in the \u003ca href=\"\/en\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e category, all connection variants under \u003ca href=\"\/en\/collections\/subwoofer-kabel\"\u003eSubwoofer cables\u003c\/a\u003e, the remaining range at \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e, and in the \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m","offer_id":53019209466192,"sku":null,"price":59.95,"currency_code":"CHF","in_stock":true},{"title":"3 m","offer_id":53019209498960,"sku":null,"price":69.95,"currency_code":"CHF","in_stock":true},{"title":"5 m","offer_id":53019209531728,"sku":null,"price":89.95,"currency_code":"CHF","in_stock":true},{"title":"8 m","offer_id":53019209564496,"sku":null,"price":119.95,"currency_code":"CHF","in_stock":true},{"title":"12 m","offer_id":53019209597264,"sku":null,"price":149.95,"currency_code":"CHF","in_stock":true},{"title":"16 m","offer_id":53019209630032,"sku":null,"price":189.95,"currency_code":"CHF","in_stock":true},{"title":"20 m","offer_id":53019209662800,"sku":null,"price":229.95,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-black-lab-subwoofer-kabel-produktansicht.png?v=1785437771"},{"product_id":"audioquest-irish-red-subwoofer-kabel","title":"AudioQuest Irish Red Subwoofer Cable","description":"\u003cp\u003eThe AudioQuest Irish Red is a subwoofer cable that takes over the balanced coax construction of the Black Lab and additionally gives the solid copper conductors a 0.5% silver plating.\u003c\/p\u003e\n\n\u003cp\u003eSo the difference from the entry-level model isn't in the geometry and not in the shielding – both are built identically – but in the conductor itself. That's more honest than any materials arms race on a datasheet.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Irish Red?\u003c\/h2\u003e\n\u003cp\u003eAudioQuest deliberately uses silver-plated copper where the transmitted band is narrow – and a subwoofer signal is exactly that. With broadband analog cables, a silver plating brings sonic side effects; in the bass, that argument doesn't apply. The rest of the construction is proven: identical positive and negative conductors in balanced coax, foamed polyethylene as dielectric, a metal-layer noise-dissipation system against high-frequency interference, and cold-welded, gold-plated RCA connectors with no solder joint in the signal path.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA single mono cable with RCA connectors on both ends, in seven lengths from 2 to 20 metres, with a red-and-black jacket and marked directionality. In-between lengths we sort out with the distributor.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Irish Red suitable for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eHonestly put: the step from the Black Lab to the Irish Red isn't a leap into a different world. Both cables share geometry, dielectric, noise dissipation, and connector technology; what differs is the conductor surface. What a good subwoofer cable can fundamentally achieve, both achieve: an interference-resistant connection over long runs and a clean ground connection without hum. If you're coming from a bundled cable, put your money into the right length and a clean connection first – that step brings the most. The Irish Red is the right choice if the subwoofer itself is high-quality, properly set up, and really meant to blend with the main speakers. For the small sub in the bedroom, the Black Lab remains the more sensible answer.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Irish Red is the elevated stage of a well-thought-out concept – same blueprint, better conductor, no verbal fog around it. Whether the extra cost pays off on your subwoofer, we'll assess for you honestly: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e subwoofer cable, mono (single cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductors:\u003c\/strong\u003e solid, silver-plated Long-Grain Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver plating:\u003c\/strong\u003e 0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeometry:\u003c\/strong\u003e balanced coax with identical positive and negative conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e foamed polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise dissipation:\u003c\/strong\u003e metal-layer Noise-Dissipation System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Cinch\/RCA, cold-welded, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirectionality:\u003c\/strong\u003e direction-controlled, arrow points towards the subwoofer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 2 \/ 3 \/ 5 \/ 8 \/ 12 \/ 16 \/ 20 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e one subwoofer cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat exactly distinguishes the Irish Red from the Black Lab?\u003c\/h3\u003e\n\u003cp\u003eThe conductor surface. On the Black Lab, the solid conductor is pure Long-Grain Copper; on the Irish Red, a 0.5% silver plating is added. Geometry, dielectric, metal-layer noise dissipation, and the cold-welded RCA connectors are executed identically on both cables. So the extra cost pays for exactly one component.\u003c\/p\u003e\n\u003ch3\u003eWhy silver-plated conductors for bass of all things?\u003c\/h3\u003e\n\u003cp\u003eBecause the transmitted frequency band is narrowly limited here. AudioQuest uses silver-plated copper specifically in such applications, while the company avoids it in broadband analog cables. In the bass, the advantage of the silver surface can thus be used without the usual trade-off. That's exactly why the Irish Red carries it.\u003c\/p\u003e\n\u003ch3\u003eCan I run two subwoofers with this?\u003c\/h3\u003e\n\u003cp\u003eNot with one cable. The Irish Red is a mono line with one RCA connector per side. For two subwoofers, take either two cables from two outputs or a Y-splitter at the preamp output. We'll tell you which variant suits your device better.\u003c\/p\u003e\n\u003ch3\u003eWhy get the Irish Red at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you where this step pays off – and where your money is better spent on the subwoofer itself or on room calibration. On top of that, you get the right length in Wädenswil, support with hum problems, and our own technician for installation.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eTo match the low end: active models in the \u003ca href=\"\/en\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e category, the remaining connection cables under \u003ca href=\"\/en\/collections\/subwoofer-kabel\"\u003eSubwoofer cables\u003c\/a\u003e, more connections at \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e, and the brand's entire range in the \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m","offer_id":53019210056016,"sku":null,"price":114.95,"currency_code":"CHF","in_stock":true},{"title":"3 m","offer_id":53019210088784,"sku":null,"price":129.95,"currency_code":"CHF","in_stock":true},{"title":"5 m","offer_id":53019210121552,"sku":null,"price":159.95,"currency_code":"CHF","in_stock":true},{"title":"8 m","offer_id":53019210154320,"sku":null,"price":199.95,"currency_code":"CHF","in_stock":true},{"title":"12 m","offer_id":53019210187088,"sku":null,"price":259.95,"currency_code":"CHF","in_stock":true},{"title":"16 m","offer_id":53019210219856,"sku":null,"price":319.95,"currency_code":"CHF","in_stock":true},{"title":"20 m","offer_id":53019210252624,"sku":null,"price":379.95,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-irish-red-subwoofer-kabel-produktansicht.png?v=1785437772"},{"product_id":"advance-paris-l-sub3-subwoofer-kabel-3-m","title":"Advance Paris L-SUB3 Subwoofer Cable, 3 m","description":"\u003cp\u003eThe Advance Paris L-SUB3 is a shielded mono subwoofer cable with 50-ohm impedance and a pure OCC copper conductor, terminated with solid metal RCA connectors – 3 metres in length for the connection between the preamp output and the subwoofer.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-SUB3?\u003c\/h2\u003e\n\u003cp\u003eBecause the subwoofer usually stands a bit away from the amplifier and main speakers, and the deep bass signal has to arrive cleanly over that distance. The continuous shielding of the L-SUB3 keeps out interference that would otherwise show up as hum in the bass range.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-SUB3 for?\u003c\/h3\u003e\n\u003cp\u003eFor the standard setup, where 3 metres between amplifier and subwoofer is enough. If your subwoofer stands further away, the L-SUB5 or L-SUB10 is the better choice.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA reliable subwoofer cable that delivers deep bass cleanly to the subwoofer, without hum problems.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Analogue subwoofer cable, mono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 50 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper, shielded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 2 × RCA, metal housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a special cable for the subwoofer?\u003c\/h3\u003e\n\u003cp\u003eA dedicated subwoofer cable like the L-SUB3 is designed for low frequencies and the often larger distance to the subwoofer – a normal RCA cable also works, but is rarely as well shielded.\u003c\/p\u003e\n\u003ch3\u003eIs a mono cable enough for a stereo subwoofer?\u003c\/h3\u003e\n\u003cp\u003eFor a single subwoofer, a mono cable is enough, since most subwoofers merge the stereo signals internally anyway. For two subwoofers, you'll need two cables accordingly.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-SUB3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll also tell you the best spot for the subwoofer in your room – that often affects the bass more than the cable itself. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for connecting a \u003ca href=\"\/en\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/av-receiver\"\u003eAV receiver\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628457353552,"sku":null,"price":119.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-sub3-subwoofer-kabel-3-m-detailansicht.jpg?v=1789722195"},{"product_id":"advance-paris-l-sub5-subwoofer-kabel-5-m","title":"Advance Paris L-SUB5 Subwoofer Cable, 5 m","description":"\u003cp\u003eThe Advance Paris L-SUB5 is a shielded mono subwoofer cable with 50-ohm impedance and a pure OCC copper conductor, terminated with solid metal RCA connectors – 5 metres in length for subwoofers placed a bit further from the amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-SUB5?\u003c\/h2\u003e\n\u003cp\u003eBecause the subwoofer often ends up in a room corner or behind the sofa, creating a larger distance to the amplifier. The continuous shielding of the L-SUB5 keeps out interference even over the longer run.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-SUB5 for?\u003c\/h3\u003e\n\u003cp\u003eFor rooms where the subwoofer is placed 4 to 5 metres away from the amplifier. If 3 metres is enough, the L-SUB3 saves you unnecessary cable length.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA reliable subwoofer cable for the medium distance, with no compromises on shielding or signal quality.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Analogue subwoofer cable, mono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 50 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper, shielded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 2 × RCA, metal housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the longer length worsen the bass?\u003c\/h3\u003e\n\u003cp\u003eNo, with correct 50-ohm shielding as in the L-SUB5, the signal stays unchanged even over 5 metres. What matters more for the bass in the room is the subwoofer's placement anyway.\u003c\/p\u003e\n\u003ch3\u003eIs a mono cable enough for my subwoofer?\u003c\/h3\u003e\n\u003cp\u003eFor a single subwoofer, a mono cable is entirely sufficient, since most subwoofers merge the stereo signals internally. For two subwoofers, you'll need two cables.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-SUB5 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we help you match cable length and subwoofer position optimally. Our team of specialists in Wädenswil is happy to advise you personally.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for connecting a \u003ca href=\"\/en\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/av-receiver\"\u003eAV receiver\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628457517392,"sku":null,"price":169.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-sub5-subwoofer-kabel-5-m-detailansicht.jpg?v=1789722197"},{"product_id":"advance-paris-l-sub10-subwoofer-kabel-10-m","title":"Advance Paris L-SUB10 Subwoofer Cable, 10 m","description":"\u003cp\u003eThe Advance Paris L-SUB10 is a shielded mono subwoofer cable with 50-ohm impedance and a pure OCC copper conductor, terminated with solid metal RCA connectors – 10 metres in length, the greatest distance in the L-SUB series.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-SUB10?\u003c\/h2\u003e\n\u003cp\u003eBecause in some rooms the only sensible spot for the subwoofer is far from the amplifier – say, in an opposite corner. The continuous shielding of the L-SUB10 keeps the signal free of interference even over the long run.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-SUB10 for?\u003c\/h3\u003e\n\u003cp\u003eFor large rooms, or a subwoofer position that's clearly set apart from the amplifier and main speakers. For most living rooms, the shorter L-SUB3 or L-SUB5 is enough.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe right cable when the subwoofer finds its optimal spot in the room far away from the amplifier.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Analogue subwoofer cable, mono\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 50 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper, shielded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 2 × RCA, metal housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 10 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the signal lose quality over a 10 m length?\u003c\/h3\u003e\n\u003cp\u003eWith correct 50-ohm shielding as in the L-SUB10, the subwoofer signal stays practically loss-free even over 10 metres. What matters more for the sound is the subwoofer's correct position in the room.\u003c\/p\u003e\n\u003ch3\u003eWhy not just use a cheap extension cable?\u003c\/h3\u003e\n\u003cp\u003eA continuously shielded, purpose-built cable like the L-SUB10 minimises the risk of hum over the long distance far better than an improvised extension with adapters.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-SUB10 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we're happy to advise you on subwoofer positioning and the optimal cable routing through the room. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for connecting a \u003ca href=\"\/en\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/av-receiver\"\u003eAV receiver\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628457648464,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-sub10-subwoofer-kabel-10-m-detailansicht.jpg?v=1789722199"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/subwoofer-kabel.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}