{"title":"Phono Preamps","description":"\u003cp\u003eA phono preamp, or phono stage for short, raises the very quiet signal from a cartridge up to line level and equalises it according to the RIAA standard.\u003c\/p\u003e\u003cp\u003eWithout it, the turntable stays silent or sounds thin; with the right one, vinyl finally becomes what it can be.\u003c\/p\u003e\u003ch2\u003eWhy a dedicated phono stage?\u003c\/h2\u003e\u003cp\u003eBecause the phono stages built into amplifiers are often an afterthought rather than a focus. A dedicated phono stage extracts more quietness, dynamics and detail from the groove and can be precisely matched to your cartridge.\u003c\/p\u003e\u003ch2\u003eWhat matters\u003c\/h2\u003e\u003cp\u003eThe phono stage has to match the cartridge: MM or MC, with the right gain and load impedance. You'll find phono preamps from Gold Note, Clearaudio, Audio Analogue and more at HD Zürisee in Wädenswil, set up to match your system.\u003c\/p\u003e\u003ch3\u003eWho is a phono stage suited for? (Plain talk)\u003c\/h3\u003e\u003cp\u003eFor anyone who takes vinyl seriously and wants more than the built-in solution offers. Plain talk: if you have a simple entry-level system, you often get along fine with the phono stage in the amplifier. But if you're running a good cartridge, you're audibly giving away potential without a matching phono stage.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA good phono stage is the unassuming lever that turns a decent vinyl setup into a truly good one. Tell us your cartridge, and we'll find the phono stage that matches it exactly and is cleanly tuned.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003ch3\u003eDo I even need a separate phono stage?\u003c\/h3\u003e\u003cp\u003eOnly if your amplifier or turntable doesn't have one built in, or if you want more quality. Many amplifiers come with an MM phono stage; for MC systems or higher demands, a separate one is worthwhile. Tell us your devices and we'll sort that out.\u003c\/p\u003e\u003ch3\u003eWhat do MM and MC mean for a phono stage?\u003c\/h3\u003e\u003cp\u003eMM stands for Moving Magnet, MC for Moving Coil – two cartridge designs with different output signals. MC systems are quieter and need more gain. The phono stage has to match the design. Tell us your cartridge and we'll recommend the right one.\u003c\/p\u003e\u003ch3\u003eDoes the phono stage have to match the cartridge?\u003c\/h3\u003e\u003cp\u003eYes, gain and load impedance should match the system, otherwise it sounds too quiet, too harsh or too tame. Good phono stages are adjustable. We tune them to your cartridge so the vinyl setup is right from the start.\u003c\/p\u003e\u003ch3\u003eDoes a better phono stage really make an audible difference?\u003c\/h3\u003e\u003cp\u003eYes, often more than expected in a vinyl setup. A quiet, cleanly tuned phono stage brings more dynamics, detail and a black background noise floor. The effect is tied to a good cartridge. We'll honestly assess how big the step is for you.\u003c\/p\u003e\u003ch3\u003eWhy buy a phono preamp at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause the phono stage only shows its potential in exact interplay with your cartridge, and that's exactly what we set up. We tune it to match, with delivery, installation and our own technician. Honest advice by Lake Zurich in Wädenswil, listening sessions where possible.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do I even need a separate phono stage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only if your amplifier or turntable doesn't have one built in, or if you want more quality. Many amplifiers come with an MM phono stage; for MC systems or higher demands, a separate one is worthwhile. Tell us your devices and we'll sort that out.\"}}, {\"@type\": \"Question\", \"name\": \"What do MM and MC mean for a phono stage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"MM stands for Moving Magnet, MC for Moving Coil – two cartridge designs with different output signals. MC systems are quieter and need more gain. The phono stage has to match the design. Tell us your cartridge and we'll recommend the right one.\"}}, {\"@type\": \"Question\", \"name\": \"Does the phono stage have to match the cartridge?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, gain and load impedance should match the system, otherwise it sounds too quiet, too harsh or too tame. Good phono stages are adjustable. We tune them to your cartridge so the vinyl setup is right from the start.\"}}, {\"@type\": \"Question\", \"name\": \"Does a better phono stage really make an audible difference?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, often more than expected in a vinyl setup. A quiet, cleanly tuned phono stage brings more dynamics, detail and a black background noise floor. The effect is tied to a good cartridge. We'll honestly assess how big the step is for you.\"}}, {\"@type\": \"Question\", \"name\": \"Why buy a phono preamp at HD Zürisee?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Because the phono stage only shows its potential in exact interplay with your cartridge, and that's exactly what we set up. We tune it to match, with delivery, installation and our own technician. Honest advice by Lake Zurich in Wädenswil, listening sessions where possible.\"}}]}\u003c\/script\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFind the matching \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e with us, as well as \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. The drive comes from the \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"audioanalogueaaphonoblack","title":"Audio Analogue Pure AAPhono Phono Preamplifier, Black","description":"\u003cp\u003eThe Audio Analogue Pure AAPhono is a phono preamplifier for MM and MC cartridges that lifts the tiny signal from your turntable to line level and equalises it to the RIAA curve.\u003c\/p\u003e\n\u003cp\u003eIt's built in Tuscany, and you can tell from its restraint: no display, no light show, but three toroidal transformers inside the chassis — two for the channels, one for the control circuitry. The black finish turns it into a device that simply disappears into the rack and gets on with its job.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Pure AAPhono?\u003c\/h2\u003e\n\u003cp\u003eA cartridge delivers a signal in the millivolt range — everything that comes after it decides how much of that survives. The AAPhono amplifies MM systems by 40 dB and MC systems by 65 dB, and holds the RIAA curve to within ±0.25 dB. In between sits a subsonic filter that catches low-frequency rumble from the platter before it reaches the power amp. Capacitance and resistance at the input are set with buttons; the values stay stored even when you unplug the unit from the mains.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eAbove all, what was missing before: quiet between the notes. A properly matched cartridge on a dedicated phono stage sounds less like \"a record playing\" and more like music in the room — voices stand firmer, cymbals decay instead of hissing, and the bass regains its shape. Matching isn't a fussy accessory detail here, it's the actual lever: the same cartridge sounds different at 100 ohms than at 1000.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Pure AAPhono for?\u003c\/h3\u003e\n\u003cp\u003eFor you, if your amplifier has no phono input — or has one that was clearly an afterthought. Equally, if you've switched to an MC cartridge and notice the built-in stage can't keep up. Plainly put: if you already own an integrated amplifier with a serious MM\/MC section, you won't find a revelation here — it's more worth looking at your cartridge or turntable instead. And if you spin three records a year, you can safely put your money elsewhere.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn unspectacular device with a very spectacular effect, provided the matching is right. That's exactly the catch: an AAPhono terminated incorrectly on an MC system is wasted potential. Tell us which cartridge sits on your tonearm, and we'll tell you which values to set — HD Zürisee in Wädenswil, +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDevice type:\u003c\/strong\u003e phono preamplifier for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 65 dB (at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.25 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM 85 dB, MC 65 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMM matching:\u003c\/strong\u003e selectable input capacitance and input resistance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC matching:\u003c\/strong\u003e selectable input resistance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSetting:\u003c\/strong\u003e via buttons on the unit, values stay stored after disconnecting from the mains\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpecial features:\u003c\/strong\u003e subsonic filter between the gain stages, DC protection circuit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e three separate toroidal transformers (one per channel, one for the control circuitry)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed, no volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandby consumption (230 V):\u003c\/strong\u003e 0.5 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 220 × 87 × 372 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I even need an external phono stage?\u003c\/h3\u003e\n\u003cp\u003eYes, if your amplifier has no phono input — without equalisation the turntable plays far too quiet and tonally wrong. If a basic phono input is present, a dedicated stage isn't a must, but it usually brings noticeably more quiet, resolution and bass definition, because it comes with its own power supply and more distance from sources of interference.\u003c\/p\u003e\n\u003ch3\u003eDoes the Pure AAPhono suit my cartridge?\u003c\/h3\u003e\n\u003cp\u003eVery likely, since it works with both MM and MC systems and can be matched: for MM you set input capacitance and resistance, for MC the input resistance. Tell us the make and model of your cartridge, and we'll confirm suitability and give you the right values straight away.\u003c\/p\u003e\n\u003ch3\u003eHow do I set capacitance and resistance?\u003c\/h3\u003e\n\u003cp\u003eVia buttons right on the unit, no tools needed and no need to switch it off. You select input capacitance and input resistance for MM systems, and input resistance for MC systems. The chosen values stay stored even when you unplug the AAPhono from the mains — set it up correctly once, and you never have to touch it again.\u003c\/p\u003e\n\u003ch3\u003eDoes the Pure AAPhono have a headphone output?\u003c\/h3\u003e\n\u003cp\u003eNo, the Pure AAPhono has no headphone output and no volume control — it's a pure phono stage with a fixed output level. You connect it to a free line-level input on your amplifier, such as AUX or Line. For headphones you'll accordingly need an amplifier or headphone amp downstream.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Pure AAPhono from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage only shows what it can do once the cartridge is correctly terminated — and that exact matching is what we do with you. Our seasoned team in Wädenswil knows the combinations from decades of practice, and our own technician sets up tracking force, azimuth and termination values cleanly for you.\u003c\/p\u003e\n\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eA phono stage is only as good as what feeds it: check out the \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e, find the matching amplifier under \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eAll Amplifiers\u003c\/a\u003e, and the rest of the range awaits in the \u003ca href=\"\/en\/collections\/audio-analogue\"\u003eAudio Analogue world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Audio Analogue","offers":[{"title":"Default Title","offer_id":52989482828112,"sku":"6500B","price":2150.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audio-analogue-pure-aaphono-phono-vorverstaerker-schwarz-frontansicht-2.jpg?v=1785425652"},{"product_id":"audioanalogueaaphonosilver","title":"Audio Analogue Pure AAPhono Phono Preamplifier, Silver","description":"\u003cp\u003eThe Audio Analogue Pure AAPhono is a phono preamplifier for MM and MC cartridges that brings the turntable signal up to line level and equalises it to the RIAA curve.\u003c\/p\u003e\n\u003cp\u003eThe silver version shows off the brushed aluminium of the Pure AA series openly — anyone who treats their rack as furniture rather than as something to hide usually reaches for this one. Inside, three toroidal transformers do the work, one per channel and one for the control circuitry, cleanly separated from each other.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Pure AAPhono?\u003c\/h2\u003e\n\u003cp\u003eBecause the most sensitive spot in your system sits between cartridge and amplifier. This is millivolt territory, and any noise added here stays in forever. The AAPhono adds 40 dB for MM and 65 dB for MC, follows the RIAA curve to within ±0.25 dB, and inserts a subsonic filter between the gain stages so rumble and warped records don't occupy the power amp. On top of that comes a DC protection circuit that stops any DC offset from travelling further.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eFirst, less: less background noise, less harshness in the treble, less mud in the bass. And then more of what's actually in the groove — space, timing, the small details at the tail of a decay. What decides this is matching to your system: MM cartridges want the right capacitance, MC cartridges the right termination resistance. You set both on the unit itself, no soldering iron and no guesswork required.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Pure AAPhono for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners whose amplifier has either no phono input at all or one that was clearly built in out of duty — and for anyone who's switched from an MM to an MC cartridge and suddenly notices it sounds quieter and thinner than promised. Plainly put: if you already have an amplifier with a full-fledged phono section, the leap is smaller than the effort might suggest. A better cartridge is then probably the bigger gain.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Pure AAPhono is the kind of device you set up once and then forget about — in the best sense. The precondition is that the termination values match your cartridge; get that wrong and even the best phono stage squanders its potential. Call us or write to us, and we'll work it out together: HD Zürisee, Wädenswil — +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDevice type:\u003c\/strong\u003e phono preamplifier for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 65 dB (at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.25 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM 85 dB, MC 65 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMM matching:\u003c\/strong\u003e selectable input capacitance and input resistance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC matching:\u003c\/strong\u003e selectable input resistance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSetting:\u003c\/strong\u003e via buttons on the unit, values stay stored after disconnecting from the mains\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpecial features:\u003c\/strong\u003e subsonic filter between the gain stages, DC protection circuit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e three separate toroidal transformers (one per channel, one for the control circuitry)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed, no volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandby consumption (230 V):\u003c\/strong\u003e 0.5 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 220 × 87 × 372 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy do I need a separate phono preamplifier?\u003c\/h3\u003e\n\u003cp\u003eBecause your amplifier otherwise can't do anything with a cartridge's signal: it's roughly a thousand times too quiet and needs RIAA equalisation. If the phono input is missing, nothing works without a separate stage. If one is present, its quality decides how much of the vinyl actually reaches you.\u003c\/p\u003e\n\u003ch3\u003eWhich cartridges suit the Pure AAPhono?\u003c\/h3\u003e\n\u003cp\u003eBoth MM and MC systems, with adjustable termination. For MM you select input capacitance and input resistance, for MC the input resistance — you set the values via buttons on the unit and they stay stored. Tell us your cartridge model and we'll tell you the right setting.\u003c\/p\u003e\n\u003ch3\u003eCan I connect the Pure AAPhono directly to a power amp?\u003c\/h3\u003e\n\u003cp\u003eNo, that doesn't work. The Pure AAPhono delivers a fixed output level and has no volume control — a power amp would immediately play at full volume with it. Between phono stage and power amp there always needs to be a preamp or an integrated amplifier with a line-level input. It has no headphone output either.\u003c\/p\u003e\n\u003ch3\u003eWhere does the Pure AAPhono get connected?\u003c\/h3\u003e\n\u003cp\u003eBetween the turntable and a free line-level input on your amplifier, so AUX, Line or CD. The turntable's ground wire belongs on the ground terminal, otherwise you'll get a hum. That's all there is to it — and if something does hum, it's almost always down to grounding or proximity to the power supply.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Pure AAPhono from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you beforehand whether the effort is even worthwhile for your chain — rather than just selling you something. HD Zürisee in Wädenswil has worked with vinyl since 1997, knows the usual pitfalls in matching, and has its own technician for installation and fine adjustment.\u003c\/p\u003e\n\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eVinyl is a team sport: you'll find the selection of \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e with us, everything else around the groove under \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e, and more devices from the range stand in the \u003ca href=\"\/en\/collections\/audio-analogue\"\u003eAudio Analogue world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Audio Analogue","offers":[{"title":"Default Title","offer_id":52989482860880,"sku":"6500","price":2150.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audio-analogue-pure-aaphono-phono-vorverstaerker-silber-frontansicht.jpg?v=1785425652"},{"product_id":"avm-ovation-ph-6-3-phono-vorverstaerker-silber","title":"AVM Ovation PH 6.3 Phono Preamplifier, Silver","description":"\u003cp\u003eThe AVM Ovation PH 6.3 is a modular phono preamplifier with a transistor output stage that accommodates up to four MM or MC cartridges at the same time.\u003c\/p\u003e\n\u003cp\u003eFour empty slots on the back, a blue display on the front, a remote in your hand – that's all it takes to properly match four cartridges. The unit is built at the AVM manufactory in Malsch, and this version wears brushed aluminum in silver.\u003c\/p\u003e\n\u003ch2\u003eWhy the Ovation PH 6.3?\u003c\/h2\u003e\n\u003cp\u003eBecause a phono stage is only as good as its matching to the cartridge feeding it. The phono input stage amplifies MM by around 40 dB and MC by around 60 dB, and sensitivity can be fine-tuned per slot in five steps from −10 to +10 dB. MC termination impedance spans six steps from 30 to 1000 ohms, MM capacitance six steps from 50 to 400 pF. Six equalization curves also cover pressings older than the RIAA standard: TELDEC, NARTB, EMI, COLUMBIA and DECCA are available alongside RIAA, with better than ±0.1 dB accuracy. Signal-to-noise ratios of 79 dB for MM and 73 dB for MC show just how quiet the whole thing stays.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eSeparate power supplies for the individual stages, one of them strong enough to also power an AVM ROTATION turntable at 15 volts. Add a mains phase indicator, a subsonic filter at 30 Hz and 12 dB per octave, mono switching with phase reversal, and a display whose brightness you can dial down in four steps to a discreet minimum. Outputs are one fixed-level RCA pair and one fixed-level XLR pair. A flight case is included for transport. The input cards come separately – at HD Zürisee in Wädenswil we put together the configuration to match your systems.\u003c\/p\u003e\n\u003ch3\u003eWho is the Ovation PH 6.3 for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the PH 6.3 pays off if you run more than one cartridge, or want to wring the last bit of quietness and resolution out of a really good system. For a chain with a single MM cartridge, it's simply overkill. And if you're deliberately after some warmth, you should add the tube-equipped PH 8.3 to your shortlist.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eNeutrality as a program: the PH 6.3 doesn't color the sound, it delivers exactly what the stylus and arm give it – quiet, fast, and with a depth of adjustment you'd otherwise only get with a soldering iron. Be honest, when did you last properly terminate your cartridge? Here you do it sitting down, with your thumb.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e modular phono preamplifier, transistor output stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 slots for phono input cards (slot 1–4), each card provides 1 stereo input; cards not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable input cards:\u003c\/strong\u003e MM RCA, MC RCA, MC XLR – freely combinable, up to 4 units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono input stage gain (AVM spec):\u003c\/strong\u003e MM approx. 40 dB, MC approx. 60 dB – total gain to the output depends on the selected sensitivity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain adjustment:\u003c\/strong\u003e 5 steps per slot from −10 to +10 dB in 5 dB increments; these correspond to the five selectable sensitivity values\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity (1 kHz, Ua = 1 V):\u003c\/strong\u003e MC 55 \/ 100 \/ 170 \/ 315 \/ 550 µV; MM 0.5 \/ 0.9 \/ 1.6 \/ 2.8 \/ 5 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload margin (1 kHz, 0 dB):\u003c\/strong\u003e MC 2.5 mV; MM 25 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMC termination impedance:\u003c\/strong\u003e 30 \/ 50 \/ 100 \/ 300 \/ 500 \/ 1000 ohms – adjustable via front buttons or remote, stored per slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM termination capacitance:\u003c\/strong\u003e 50 \/ 100 \/ 150 \/ 200 \/ 300 \/ 400 pF – same controls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM 79 dB \/ 85 dB(A); MC 73 dB \/ 77 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualization curves:\u003c\/strong\u003e 6 selectable – RIAA, TELDEC, NARTB, EMI, COLUMBIA, DECCA (accuracy better than ±0.1 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e 30 Hz, 12 dB\/octave, switchable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating mode:\u003c\/strong\u003e mono\/stereo switchable, including phase reversal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × RCA pair (50 ohms) and 1 × XLR pair (100 ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed, not adjustable – max. 7 V on RCA, max. 14 V on XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger input:\u003c\/strong\u003e not available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 15 V \/ 1.5 A supply jack for AVM ROTATION turntables (galvanically isolated), IR-EXT 3.5 mm, configuration port, mains phase indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e blue VF graphic display, brightness in 4 steps (25 \/ 50 \/ 75 \/ 100 %)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supplies:\u003c\/strong\u003e separate power supplies for the individual stages, including a high-power supply for the 15 V feed of an AVM ROTATION turntable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube complement:\u003c\/strong\u003e none – pure transistor output stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 100–240 V AC, 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 25 W; standby 0.45 W; off 0 W (auto-standby after 19.5 minutes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 431 × 130 × 390 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Aluminum Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years; extendable by up to 2 additional years with free online registration at AVM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e phono preamplifier, power cable, RC 3 Phono remote control, instruction manual, transport flight case – input cards separate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I absolutely need input cards for the AVM Ovation PH 6.3?\u003c\/h3\u003e\n\u003cp\u003eYes, at least one. The base unit ships without cards; only the modules turn the four slots into phono inputs. MM RCA, MC RCA and MC XLR are available, freely combinable up to four units. We'll figure out which card suits your cartridge before you order.\u003c\/p\u003e\n\u003ch3\u003eHow good is the PH 6.3's signal-to-noise ratio?\u003c\/h3\u003e\n\u003cp\u003eAVM states 79 dB or 85 dB(A) for the MM card and 73 dB or 77 dB(A) for the MC cards. At these values, the background noise between the grooves practically disappears. The separate power supplies for the individual stages also contribute to the quietness.\u003c\/p\u003e\n\u003ch3\u003eWhat outputs does the AVM Ovation PH 6.3 have?\u003c\/h3\u003e\n\u003cp\u003eExactly two pairs: an RCA pair with 50 ohm output impedance and an XLR pair with 100 ohms. Both deliver a fixed level of up to 7 volts on RCA and 14 volts on XLR. There's no volume control or headphone output – that belongs downstream in a preamplifier.\u003c\/p\u003e\n\u003ch3\u003eCan the PH 6.3 power my AVM turntable?\u003c\/h3\u003e\n\u003cp\u003eYes. On the back there's a galvanically isolated supply jack with 15 volts and 1.5 amps for turntables in the AVM ROTATION series. That saves a separate plug-in power supply and keeps the turntable's power decoupled from the mains line. The connector isn't intended for other turntables.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the PH 6.3 and the PH 8.3?\u003c\/h3\u003e\n\u003cp\u003eOnly the output stage: transistor in the PH 6.3, tube with AVM-803-T technology in the PH 8.3. At AVM, the higher model number stands for the tube version, not more power. Modules, equalization curves, connections, display and operation are identical on both units.\u003c\/p\u003e\n\u003ch3\u003eHow long is AVM's warranty on the Ovation PH 6.3?\u003c\/h3\u003e\n\u003cp\u003eTwo years from the date of purchase. Anyone who registers the unit for free online at AVM gets up to two additional years. As an authorized dealer, we handle any warranty case for you, and our own technician takes care of service and installation – no need to ship the unit yourself.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the AVM Ovation PH 6.3 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just deliver the box – we go through the module choice with you, set the termination to match your cartridge, and handle the connection on site. As an experienced team with our own technician, we stay reachable after the purchase too. Just call: +41 44 680 22 00.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eComparable units are in \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono Preamplifiers\u003c\/a\u003e. Find a matching cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e, the turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, and the connection from the arm to the phono stage under \u003ca href=\"\/en\/collections\/phonokabel\"\u003ePhono Cables\u003c\/a\u003e – and if you want to browse the whole topic, click \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"AVM","offers":[{"title":"Default Title","offer_id":52989489709392,"sku":"303083","price":5990.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/avm-ovation-ph-6-3-phono-vorverstaerker-silber-frontansicht.png?v=1787229773"},{"product_id":"avm-ph-30-3-phono-vorverstaerker-schwarz","title":"AVM PH 30.3 Phono Preamplifier, Black","description":"\u003cp\u003eThe AVM PH 30.3 is a compact phono preamplifier that amplifies signals from MM and MC cartridges and equalises them to RIAA.\u003c\/p\u003e\n\u003cp\u003eThe smallest phono preamplifier from AVM, made in Malsch, in Baden – and still a full-fledged one. The solid aluminium housing holds a cleanly built Class-A equalisation stage with switchable MM\/MC operation, plug-on load adapters for MC matching and a fixed subsonic filter. The power supply sits externally, so no transformer hum creeps into the signal.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH 30.3?\u003c\/h2\u003e\n\u003cp\u003eBecause a turntable without a proper phono stage only shows half its potential. The PH 30.3 raises the tiny cartridge signal with low noise (40 dB for MM, 60 dB for MC) and equalises it precisely to RIAA – with a curve accuracy under ±0.3 dB. For MC cartridges, you simply plug on the matching load adapter instead of fiddling around inside the unit. The result: a quiet background and fine, uncoloured detail. Small in size, serious in ambition.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA full-fledged phono stage for almost any cartridge: separate RCA inputs for MM and MC, switchable on the rear, plus its own RCA pair for the plug-on load adapters at 100, 200 and 1000 Ω, a ground terminal for the turntable, a subsonic filter against footfall and record warp, and an external 24 V power supply for clean power. The equalisation is fixed to RIAA – Decca or Columbia curves to switch between are deliberately not offered here. RCA in, RCA out, done. This version comes in Black.\u003c\/p\u003e\n\u003ch3\u003eWho is the PH 30.3 right for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: for anyone connecting a turntable to an amplifier without a phono input, or wanting a better phono stage than the built-in one – without putting a full-size unit in place. It isn't the right choice if you expect a display, a remote control, a balanced XLR output or selectable equalisation curves: the PH 30.3 has none of that, nor a headphone output. Anyone needing that should look at AVM's larger Evolution and Ovation PH models. For most systems, though, the PH 30.3 is dimensioned exactly right.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH 30.3 is the unflustered answer to a question many people put off for too long. It takes up little space, costs no nerves to set up, and gets exactly what you paid for out of a good turntable. Hand on heart – anyone who seriously listens to vinyl shouldn't leave the phono stage to chance. Which load adapter suits your system is something we're happy to work out with you by phone beforehand.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM \/ MC switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualisation:\u003c\/strong\u003e Class-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualisation curve:\u003c\/strong\u003e RIAA (fixed) · no selectable curves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (MM):\u003c\/strong\u003e 40 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (MC):\u003c\/strong\u003e 60 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance (MM):\u003c\/strong\u003e 47 kΩ \/ 220 pF (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance (MC):\u003c\/strong\u003e 47 kΩ \/ 1 nF, adjustable via load adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMC matching:\u003c\/strong\u003e plug-on load adapters 100 \/ 200 \/ 1000 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response (extended):\u003c\/strong\u003e 8 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA curve accuracy:\u003c\/strong\u003e \u0026lt; ±0.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.013 % (MM) \/ \u0026lt; 0.055 % (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (MM):\u003c\/strong\u003e 72 dB \/ 82 dB(A) at 5 mV input voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (MC):\u003c\/strong\u003e 66 dB \/ 73.5 dB(A) at 0.5 mV input voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e present, fixed setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× phono MM (RCA L\/R) · 1× phono MC (RCA L\/R) · 1× RCA pair for the plug-on MC load adapters · ground terminal (GND)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1× RCA pair (L\/R)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced connections (XLR):\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed, not adjustable · max. 6.5 V at 1 kHz · output impedance 47 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e not present (no display)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger input:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e not present · operated via switches on the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external, 24 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 3.6 W in operation · 0.1 W standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e solid extruded aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e aluminium Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 150 × 52 × 108 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (without power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years, 4 years with online registration with the manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e PH 30.3 · external 24 V power supply · load adapter plugs 100 \/ 200 \/ 1000 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a phono preamplifier like the PH 30.3 for my turntable?\u003c\/h3\u003e\n\u003cp\u003eYes, if your amplifier has no phono input or your turntable has no built-in phono stage. The PH 30.3 amplifies and equalises the signal correctly to RIAA. AVM's Rotation-series turntables are supplied without an internal phono stage – in that case, the PH 30.3 is the right addition.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH 30.3 suit MM and MC cartridges?\u003c\/h3\u003e\n\u003cp\u003eYes. You switch between MM and MC operation, and each has its own RCA input. In MM mode, 47 kohm with 220 pF is applied; in MC mode, you adjust the termination impedance via plug-on load adapters. That lets the PH 30.3 work well with the vast majority of cartridges on the market.\u003c\/p\u003e\n\u003ch3\u003eAre the MC load adapters included with the PH 30.3?\u003c\/h3\u003e\n\u003cp\u003eYes. A set of load adapter plugs for 100, 200 and 1000 ohm is part of the scope of delivery. They're plugged onto their own RCA pair at the rear, with no tools needed. Anyone needing a different impedance can have matching plugs made – that's deliberately left open.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH 30.3 have an XLR output, a display or a headphone output?\u003c\/h3\u003e\n\u003cp\u003eNo, none of that. The PH 30.3 outputs via one RCA pair at a fixed level, has neither balanced XLR jacks nor a display, no trigger input and no remote control. Headphones can't be connected directly either – for that, you need the amplifier behind it.\u003c\/p\u003e\n\u003ch3\u003eCan I select equalisation curves other than RIAA on the PH 30.3?\u003c\/h3\u003e\n\u003cp\u003eNo. The equalisation is fixed to the RIAA curve, with a curve accuracy under ±0.3 dB. Old Decca, Columbia or Teldec curves can't be selected. For collections from around 1955 onward, RIAA is the standard – for anything earlier, we're happy to advise you on alternatives.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the AVM PH 30.3 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause getting the right match to your cartridge makes all the difference. We at HD Zürisee in Wädenswil choose MM or MC, plug in the matching load adapter and tune the PH 30.3 to your turntable and system. Call us (044 680 22 00) or message us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls)).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, the cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e and the cabling under \u003ca href=\"\/en\/collections\/phonokabel\"\u003ePhono cable\u003c\/a\u003e. Larger phono stages are under \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono preamplifiers\u003c\/a\u003e, and anyone planning the whole analogue chain is best off browsing under \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"AVM","offers":[{"title":"Default Title","offer_id":52989490397520,"sku":"303039","price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/avm-ph-30-3-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785441529"},{"product_id":"avm-ph-30-3-phono-vorverstaerker-silber","title":"AVM PH 30.3 Phono Preamplifier, Silver","description":"\u003cp\u003eThe AVM PH 30.3 is a compact phono preamplifier that amplifies signals from MM and MC cartridges and equalises them to RIAA.\u003c\/p\u003e\n\u003cp\u003eIn Silver, the most understated solution for a link in the chain that's often overlooked: AVM's smallest phono stage, made in Malsch, in Baden, in a solid aluminium housing, with Class-A equalisation, switchable MM\/MC operation, plug-on load adapters and a fixed subsonic filter. The power supply sits externally, so no transformer hum creeps into the signal.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH 30.3?\u003c\/h2\u003e\n\u003cp\u003eBecause the most sensitive point in the whole system lies between the stylus and the amplifier. The PH 30.3 raises the tiny cartridge signal with low noise (40 dB for MM, 60 dB for MC) and equalises it precisely to RIAA – with a curve accuracy under ±0.3 dB. You handle MC matching with a plug-on load adapter, with no screwdriver and no hunting through DIP switches. The result: a quiet background, fine uncoloured detail. Small in size, serious in ambition.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA full-fledged phono stage for almost any cartridge: separate RCA inputs for MM and MC, switchable on the rear, plus its own RCA pair for the plug-on load adapters at 100, 200 and 1000 Ω, a ground terminal for the turntable, a subsonic filter against footfall and record warp, plus an external 24 V power supply. The equalisation is fixed to RIAA – selectable curves for historical pressings aren't offered here. RCA in, RCA out, done. This version comes in Silver.\u003c\/p\u003e\n\u003ch3\u003eWho is the PH 30.3 right for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: for anyone connecting a turntable to an amplifier without a phono input, or wanting a better phono stage than the built-in one – without putting a full-size unit in place. It isn't the right choice if a display, a remote control, a balanced XLR output or switchable equalisation curves are on your list: all of that is deliberately missing, and a headphone output too. Anyone needing that should look further at AVM's larger Evolution and Ovation PH models. For most systems, though, the PH 30.3 is dimensioned exactly right.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH 30.3 makes little fuss and gets a lot right. It needs hardly any space, is set up in five minutes, and gets exactly what you bought it for out of a good turntable. Honestly: skimping on the phono stage and then puzzling over how the records sound is an expensive detour. Which load adapter suits your system is something we're happy to work out with you by phone beforehand.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM \/ MC switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualisation:\u003c\/strong\u003e Class-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualisation curve:\u003c\/strong\u003e RIAA (fixed) · no selectable curves\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (MM):\u003c\/strong\u003e 40 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (MC):\u003c\/strong\u003e 60 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance (MM):\u003c\/strong\u003e 47 kΩ \/ 220 pF (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance (MC):\u003c\/strong\u003e 47 kΩ \/ 1 nF, adjustable via load adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMC matching:\u003c\/strong\u003e plug-on load adapters 100 \/ 200 \/ 1000 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response (extended):\u003c\/strong\u003e 8 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA curve accuracy:\u003c\/strong\u003e \u0026lt; ±0.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.013 % (MM) \/ \u0026lt; 0.055 % (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (MM):\u003c\/strong\u003e 72 dB \/ 82 dB(A) at 5 mV input voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (MC):\u003c\/strong\u003e 66 dB \/ 73.5 dB(A) at 0.5 mV input voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e present, fixed setting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× phono MM (RCA L\/R) · 1× phono MC (RCA L\/R) · 1× RCA pair for the plug-on MC load adapters · ground terminal (GND)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1× RCA pair (L\/R)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced connections (XLR):\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed, not adjustable · max. 6.5 V at 1 kHz · output impedance 47 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e not present (no display)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger input:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e not present · operated via switches on the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external, 24 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 3.6 W in operation · 0.1 W standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e solid extruded aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e aluminium Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 150 × 52 × 108 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (without power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years, 4 years with online registration with the manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e PH 30.3 · external 24 V power supply · load adapter plugs 100 \/ 200 \/ 1000 Ω\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a phono preamplifier like the PH 30.3 for my turntable?\u003c\/h3\u003e\n\u003cp\u003eYes, if your amplifier has no phono input or your turntable has no built-in phono stage. The PH 30.3 amplifies and equalises the signal correctly to RIAA. AVM's Rotation-series turntables are supplied without an internal phono stage – in that case, the PH 30.3 is the right addition.\u003c\/p\u003e\n\u003ch3\u003eHow many inputs does the PH 30.3 have?\u003c\/h3\u003e\n\u003cp\u003eTwo signal inputs: one RCA pair each for MM and for MC, switched on the rear. Then there's a third RCA pair that doesn't take a source at all, but the plug-on MC load adapters, plus a ground terminal for the turntable. Output is via one RCA pair.\u003c\/p\u003e\n\u003ch3\u003eAre the MC load adapters included with the PH 30.3?\u003c\/h3\u003e\n\u003cp\u003eYes. A set of load adapter plugs for 100, 200 and 1000 ohm is part of the scope of delivery. They're plugged onto their own RCA pair at the rear, with no tools needed. Anyone needing a different impedance can have matching plugs made – that's deliberately left open.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH 30.3 have an XLR output, a display or a headphone output?\u003c\/h3\u003e\n\u003cp\u003eNo, none of that. The PH 30.3 outputs via one RCA pair at a fixed level, has neither balanced XLR jacks nor a display, no trigger input and no remote control. Headphones can't be connected directly either – for that, you need the amplifier behind it.\u003c\/p\u003e\n\u003ch3\u003eCan I select equalisation curves other than RIAA on the PH 30.3?\u003c\/h3\u003e\n\u003cp\u003eNo. The equalisation is fixed to the RIAA curve, with a curve accuracy under ±0.3 dB. Old Decca, Columbia or Teldec curves can't be selected. For collections from around 1955 onward, RIAA is the standard – for anything earlier, we're happy to advise you on alternatives.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the AVM PH 30.3 in Silver at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the match to your cartridge decides the result. At HD Zürisee in Wädenswil, we choose MM or MC, plug in the matching load adapter and tune the PH 30.3 to your turntable and system – with a well-practised team and Mauri as our own technician. Call us (044 680 22 00) or message us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls)).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, the cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e and the cabling under \u003ca href=\"\/en\/collections\/phonokabel\"\u003ePhono cable\u003c\/a\u003e. The larger phono stages are under \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono preamplifiers\u003c\/a\u003e, and the overview of the whole analogue chain is given by \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"AVM","offers":[{"title":"Default Title","offer_id":52989490430288,"sku":"303040","price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/avm-ph-30-3-phono-vorverstaerker-silber-schraegansicht.jpg?v=1785441529"},{"product_id":"clearaudiobalancev2bl","title":"Clearaudio Balance V2 Phono Preamp, Black","description":"\u003cp\u003eThe Clearaudio Balance V2 is a fully balanced phono preamp for MM and MC cartridges with XLR inputs and outputs, a switchable subsonic filter and a headphone output – here in the black anodised aluminium housing.\u003c\/p\u003e\n\u003cp\u003eIt raises your cartridge's tiny signal to line level without adding anything of its own. The balanced design carries the signal mirrored through the entire circuit; whatever interference creeps in along the way cancels itself out at the end. What's left is music against a very quiet background.\u003c\/p\u003e\n\u003ch2\u003eWhy the Balance V2?\u003c\/h2\u003e\n\u003cp\u003eBecause two things come together here that rarely do: consistent balance and ease of use. The Balance V2 is balanced on both sides – XLR goes in as well as out, not just out. That pays off especially with quiet MC cartridges and longer cable runs. Add to that separately optimised MM and MC stages, a switchable subsonic filter against rumble and warped records, mute and automatic operation via a front-panel button, and a housing machined from a solid block of aluminium. The power supply lives in its own chassis, where it bothers no one.\u003c\/p\u003e\n\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\n\u003cp\u003eCalm, and dynamics without compression on top of it. An orchestral crescendo comes through unrestrained, instead of clipping its horns inside the phono stage. The tonal balance is neutral and mature, details stand free without anyone having touched a treble control. Over XLR the soundstage opens up noticeably further than over RCA – if you have the option, use it.\u003c\/p\u003e\n\u003ch3\u003eWho is the Balance V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor discerning listeners who want a high-level phono stage and don't want to keep re-adjusting it: the loading is fixed at 47 kiloohms for MM and 500 ohms for MC, matching the vast majority of good cartridges. Plain talk: if you run exotic cartridges with an unusual loading requirement, or you like to experiment, you're better served by a freely adjustable stage. And if you want to run two turntables in parallel, look at the larger Balance Reference Phono – the Balance V2 has one system input, not two.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA mature, consistently balanced phono stage that proves its quality not through a list of switches but through calm and composure. A subsonic filter, headphone output and outboard power supply make it practical for everyday use, and AUDIO's Golden Ear award in 2020 confirms the direction. Whether your cartridge suits the fixed loading values is something we can tell you at HD Zürisee in Wädenswil in two minutes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e fully balanced phono preamp for MM and MC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating mode:\u003c\/strong\u003e MM\/MC switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e +46 dB (MM) \/ +66 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance\/capacitance:\u003c\/strong\u003e 47 kΩ \/ 270 pF (MM), 500 Ω \/ 270 pF (MC), fixed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed level and variable level via the volume control, max. \u0026gt; 12 V (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 150 Ω (XLR) \/ 75 Ω (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e yes – 6.3 mm jack\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.1 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.001 % (IEC A)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e − 78 dB (MM) \/ − 79 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 92 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadroom:\u003c\/strong\u003e +23 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable, 20 Hz (− 6 dB\/octave, per channel)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e volume control, mute and automatic operation via front-panel button\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC (power supply + 21 V DC), 1.4 m connecting cable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 6.6 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e approx. 240 × 62 × 145 mm (158 mm incl. RCA sockets)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 2.3 kg (preamp) + approx. 1.4 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing\/finish:\u003c\/strong\u003e machined aluminium, black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL033\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-year manufacturer's warranty from registration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e preamp, external power supply with connecting cable (1.4 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the balanced XLR connection give me?\u003c\/h3\u003e\n\u003cp\u003eCleaner, less interference-prone transmission. The Balance V2 is balanced on both sides, so XLR is available on both the input and the output. If your amplifier has balanced inputs, the route pays off especially over longer cable runs. You'll need an XLR cable pair for this, which isn't included.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the loading for my MC cartridge?\u003c\/h3\u003e\n\u003cp\u003eYou don't – it's set at the factory. Clearaudio loads MM at 47 kiloohms and MC at 500 ohms, each at 270 picofarads. These values suit the vast majority of high-quality cartridges. All you switch is between MM and MC operation yourself – no fiddly switches on the underside required.\u003c\/p\u003e\n\u003ch3\u003eWhat's the subsonic filter for?\u003c\/h3\u003e\n\u003cp\u003eEverything below the music. The switchable filter kicks in at 20 Hz with 6 dB per octave, separately for each channel. It tames rumble, footfall and woofer pumping caused by slightly warped records, without touching the audible bass. With a clean setup, you can just leave it switched off.\u003c\/p\u003e\n\u003ch3\u003eCan I also use the Balance V2 as a headphone amp?\u003c\/h3\u003e\n\u003cp\u003eYes, for the turntable. The built-in headphone output with a 6.3 mm jack is controlled via the volume control on the front. You don't need an extra device for that. Other sources such as streamers or CD players can't be connected though – the Balance V2 only handles phono signals.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Balance V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage of this class needs to match the cartridge, otherwise you're wasting the potential of both. We check the combination with you, set up the turntable and connections, and remain available afterwards too, as an authorised Clearaudio dealer. Reach us on +41 44 680 22 00, via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, plus \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. Small parts for the turntable are in \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989498294608,"sku":null,"price":3100.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-balance-v2-phono-vorverstaerker-schwarz-frontansicht.jpg?v=1785846958"},{"product_id":"clearaudiobalancev2si","title":"Clearaudio Balance V2 Phono Preamp, Silver","description":"\u003cp\u003eThe Clearaudio Balance V2 is a fully balanced phono preamp for MM and MC cartridges with balanced XLR connections at both input and output, a switchable subsonic filter and a headphone output – here in silver.\u003c\/p\u003e\n\u003cp\u003eA cartridge delivers a few thousandths of a volt. Everything that happens after that decides how much of it stays music. The Balance V2 carries this signal mirrored through the entire circuit, so that interference cancels itself out at the output – the result is a listening experience against a very dark background.\u003c\/p\u003e\n\u003ch2\u003eWhy the Balance V2?\u003c\/h2\u003e\n\u003cp\u003eBalance here isn't a label on the back panel, it's carried all the way through: XLR is available on both the input and the output, and the entire signal path is built accordingly. Add to that separately optimised stages for moving magnet and moving coil, RIAA equalisation accurate to ± 0.1 dB, a switchable subsonic filter, and a housing that isn't bent but machined from a solid block of aluminium. The power supply lives in its own chassis – the most elegant way to keep transformer hum out of the signal path.\u003c\/p\u003e\n\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\n\u003cp\u003eThe first thing you notice is what's missing: hiss, hash, that faint murmur between the grooves. What's left has contour. Big orchestral arcs run through to the end without the dynamics buckling, voices stand tangibly in the centre. Over the balanced connection the soundstage becomes noticeably wider and deeper than over RCA – a difference you don't have to go looking for.\u003c\/p\u003e\n\u003ch3\u003eWho is the Balance V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor listeners with a good cartridge who want a phono stage you connect once and then forget about. The loading values are fixed – 47 kiloohms for MM, 500 ohms for MC – tuned to the great majority of high-quality cartridges. Plain talk: if you like experimenting with impedances, or own a cartridge with an unusual loading requirement, you need a freely configurable stage. And if you want to connect two turntables at once, that's only possible with the Balance Reference Phono.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Balance V2 makes little fuss and gets a lot right: consistently balanced, very quiet, practical for everyday use with a subsonic filter and headphone output, cleanly separated with its outboard power supply. AUDIO awarded it the Golden Ear in 2020. Whether it suits your system and your chain is a five-minute question – ask us at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e fully balanced phono preamp for MM and MC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperating mode:\u003c\/strong\u003e MM\/MC switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e +46 dB (MM) \/ +66 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance\/capacitance:\u003c\/strong\u003e 47 kΩ \/ 270 pF (MM), 500 Ω \/ 270 pF (MC), fixed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e fixed level and variable level via the volume control, max. \u0026gt; 12 V (1 kHz)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 150 Ω (XLR) \/ 75 Ω (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e yes – 6.3 mm jack\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.1 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.001 % (IEC A)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e − 78 dB (MM) \/ − 79 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 92 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadroom:\u003c\/strong\u003e +23 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable, 20 Hz (− 6 dB\/octave, per channel)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e volume control, mute and automatic operation via front-panel button\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC (power supply + 21 V DC), 1.4 m connecting cable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 6.6 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e approx. 240 × 62 × 145 mm (158 mm incl. RCA sockets)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 2.3 kg (preamp) + approx. 1.4 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHousing\/finish:\u003c\/strong\u003e machined aluminium, silver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL033\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3-year manufacturer's warranty from registration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e preamp, external power supply with connecting cable (1.4 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes the Balance V2 also have balanced inputs?\u003c\/h3\u003e\n\u003cp\u003eYes. Unlike many phono stages, the Balance V2 offers XLR not only on the output but on the input too. If your tonearm cable is wired balanced, the signal path stays fully balanced from the stylus right through to the amplifier. RCA is also available on both sides.\u003c\/p\u003e\n\u003ch3\u003eDo I need to set the loading impedance?\u003c\/h3\u003e\n\u003cp\u003eNo, it's fixed at the factory: 47 kiloohms for moving magnet, 500 ohms for moving coil, each with 270 picofarads. Clearaudio has tuned these values to high-quality cartridges. You only choose between MM and MC operation, with gain jumping from 46 to 66 dB accordingly.\u003c\/p\u003e\n\u003ch3\u003eWhen should I switch on the subsonic filter?\u003c\/h3\u003e\n\u003cp\u003eWhen the woofers visibly pump with slightly warped records, or the turntable picks up footfall. The filter kicks in at 20 Hz and rolls off at 6 dB per octave, separately for each channel. On a stable, decoupled surface you can usually leave it switched off.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the Balance V2?\u003c\/h3\u003e\n\u003cp\u003eYes, via the 6.3 mm jack on the front, controlled by the volume knob next to it. For vinyl, that replaces a separate headphone amp. You can't feed in other sources though: the Balance V2 accepts only phono signals, streamers or CD players still need their own path.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Balance V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage and a cartridge need to form a pair. We match output voltage, stylus type and connection to your chain, mount and align it for you on request, and as an authorised Clearaudio dealer we're also there for service and warranty afterwards. Reach us on +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching cartridges are found under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, turntables under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and arms in \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. If you want to build the whole analogue side in one place, check \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989498327376,"sku":null,"price":3100.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-balance-v2-phono-vorverstaerker-silber-frontansicht.jpg?v=1785846958"},{"product_id":"clearaudiobasicv2bl","title":"Clearaudio Basic V2 Phono Preamp, Black","description":"\u003cp\u003eThe Clearaudio Basic V2 is a phono preamp for MM and MC cartridges with a switchable subsonic filter and RIAA equalisation accurate to ± 0.1 dB.\u003c\/p\u003e\n\u003cp\u003eNot a device for menus, displays or decorative lighting: the Basic V2 amplifies the tiny stylus signal with low noise and neutrality – leaving your turntable and cartridge exactly the character you chose them for.\u003c\/p\u003e\n\u003ch2\u003eWhy the Basic V2?\u003c\/h2\u003e\n\u003cp\u003eA housing machined from a solid block of aluminium, with no cavities, shields the sensitive circuit from interference, and the signal paths stay short and minimalist. The external power supply keeps the transformer away from the signal, and the per-channel switchable subsonic filter (20 Hz, -18 dB\/oct.) takes the punch out of record warp and footfall before your woofers pointlessly shovel air. The MM\/MC switch sits on the underside of the unit – set once for your cartridge, then never touched again.\u003c\/p\u003e\n\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\n\u003cp\u003eFine, unfussy resolution, a dry, well-defined bass and a dynamic that doesn't sound like an effect, but like music. With 66 dB of gain in MC mode there's enough headroom left for quiet cartridges, and even delicate passages stand out cleanly from the noise floor. Compared with the built-in phono board in most integrated amplifiers, this isn't a small step, it's a change of category.\u003c\/p\u003e\n\u003ch3\u003eWho is the Basic V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone running a good upper-mid-range turntable who finally wants to make the phono stage a proper component instead of an afterthought. Plain talk: the loading values are hard-wired – 47 kΩ \/ 270 pF for MM, 500 Ω \/ 270 pF for MC. If you own an exotic MC cartridge that explicitly demands a different load, or you like tinkering with resistors, you're in the wrong place here and better off with the larger Balance V2. And with MM cartridges the Basic V2 is a touch noisier than with MC – it's clearly built for moving coil.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA phono stage with no nerves: cleanly built, correctly sized, sonically mature. You put it in place, plug it in, set the switch correctly – and never think about it again afterwards. That's the biggest compliment you can pay a component at this point in the chain.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamp for MM and MC\u003c\/li\u003e\n\u003cli\u003eGain: +46 dB (MM) \/ +66 dB (MC) at 1 kHz\u003c\/li\u003e\n\u003cli\u003eInput impedance: 47 kΩ \/ 270 pF (MM), 500 Ω \/ 270 pF (MC), fixed\u003c\/li\u003e\n\u003cli\u003eMM\/MC switching: switch on the underside of the unit\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: ± 0.1 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026lt; 0.002 % (IEC A)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 72 dB (MM) \/ 67 dB (MC)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 20 Hz, -18 dB\/oct., switchable per channel\u003c\/li\u003e\n\u003cli\u003eMax. output voltage: \u0026gt; 10 V at 1 kHz\u003c\/li\u003e\n\u003cli\u003eConnections: RCA inputs and outputs, gold-plated, plus ground terminal\u003c\/li\u003e\n\u003cli\u003ePower supply: external power supply, ± 18 V DC\u003c\/li\u003e\n\u003cli\u003ePower consumption: 3 W in operation, \u0026lt; 0.3 W standby\u003c\/li\u003e\n\u003cli\u003eHousing: aluminium machined from a solid block, black anodised\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 118 × 42 × 145 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 1.2 kg (unit and power supply)\u003c\/li\u003e\n\u003cli\u003eWhat's included: phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat's the load resistance of the Basic V2 in MC mode?\u003c\/h3\u003e\n\u003cp\u003eFixed at 500 ohms with 270 picofarads, not adjustable. This value works very well with the vast majority of common MC cartridges. If your cartridge's manufacturer explicitly calls for a different load, tell us in advance – then we'll look together at whether the Basic V2 is the right choice.\u003c\/p\u003e\n\u003ch3\u003eWhere do I switch between MM and MC?\u003c\/h3\u003e\n\u003cp\u003eThe switch sits on the underside of the housing. That sounds inconvenient, but it's deliberate: no extra switch in the signal path, no accidental mis-operation mid-use. You set it once for your cartridge and then leave it alone.\u003c\/p\u003e\n\u003ch3\u003eWhat does the subsonic filter do?\u003c\/h3\u003e\n\u003cp\u003eIt attenuates everything below 20 hertz at 18 decibels per octave and can be switched on per channel. Warped records, footfall and turntable rumble generate energy right there that no one hears – but that visibly makes your woofers work. Get rid of it, and the playback becomes noticeably calmer.\u003c\/p\u003e\n\u003ch3\u003eWhich input on my amplifier should the Basic V2 go into?\u003c\/h3\u003e\n\u003cp\u003eA free high-level input – so AUX, CD, tuner or line. Never the existing phono input, where the signal would be equalised and amplified a second time. Your turntable's ground wire goes to the Basic V2's ground terminal, not to the amplifier.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Basic V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage is only as good as its match to the cartridge. We tell you honestly whether your cartridge suits the fixed loading values, set up tracking force, azimuth and wiring at the same time, and remain reachable later if something does start humming. Call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or write to shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Basic V2 is only as good as what's in front of it: \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e set the basic character, \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e the precision. Brush, scale and cleaning gear are under \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e – and if you're not sure what suits your chain, just get in touch with HD Zürisee in Wädenswil.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989498360144,"sku":null,"price":1250.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-basic-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846981"},{"product_id":"clearaudiobasicv2si","title":"Clearaudio Basic V2 Phono Preamp, Silver","description":"\u003cp\u003eThe Clearaudio Basic V2 is a phono preamp for MM and MC cartridges with a switchable subsonic filter and RIAA equalisation accurate to ± 0.1 dB.\u003c\/p\u003e\n\u003cp\u003eNot a device for menus, displays or decorative lighting: the Basic V2 amplifies the tiny stylus signal with low noise and neutrality – leaving your turntable and cartridge exactly the character you chose them for.\u003c\/p\u003e\n\u003ch2\u003eWhy the Basic V2?\u003c\/h2\u003e\n\u003cp\u003eA housing machined from a solid block of aluminium, with no cavities, shields the sensitive circuit from interference, and the signal paths stay short and minimalist. The external power supply keeps the transformer away from the signal, and the per-channel switchable subsonic filter (20 Hz, -18 dB\/oct.) takes the punch out of record warp and footfall before your woofers pointlessly shovel air. The MM\/MC switch sits on the underside of the unit – set once for your cartridge, then never touched again.\u003c\/p\u003e\n\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\n\u003cp\u003eFine, unfussy resolution, a dry, well-defined bass and a dynamic that doesn't sound like an effect, but like music. With 66 dB of gain in MC mode there's enough headroom left for quiet cartridges, and even delicate passages stand out cleanly from the noise floor. Compared with the built-in phono board in most integrated amplifiers, this isn't a small step, it's a change of category.\u003c\/p\u003e\n\u003ch3\u003eWho is the Basic V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone running a good upper-mid-range turntable who finally wants to make the phono stage a proper component instead of an afterthought. Plain talk: the loading values are hard-wired – 47 kΩ \/ 270 pF for MM, 500 Ω \/ 270 pF for MC. If you own an exotic MC cartridge that explicitly demands a different load, or you like tinkering with resistors, you're in the wrong place here and better off with the larger Balance V2. And with MM cartridges the Basic V2 is a touch noisier than with MC – it's clearly built for moving coil.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA phono stage with no nerves: cleanly built, correctly sized, sonically mature. You put it in place, plug it in, set the switch correctly – and never think about it again afterwards. That's the biggest compliment you can pay a component at this point in the chain.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamp for MM and MC\u003c\/li\u003e\n\u003cli\u003eGain: +46 dB (MM) \/ +66 dB (MC) at 1 kHz\u003c\/li\u003e\n\u003cli\u003eInput impedance: 47 kΩ \/ 270 pF (MM), 500 Ω \/ 270 pF (MC), fixed\u003c\/li\u003e\n\u003cli\u003eMM\/MC switching: switch on the underside of the unit\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: ± 0.1 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026lt; 0.002 % (IEC A)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 72 dB (MM) \/ 67 dB (MC)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 20 Hz, -18 dB\/oct., switchable per channel\u003c\/li\u003e\n\u003cli\u003eMax. output voltage: \u0026gt; 10 V at 1 kHz\u003c\/li\u003e\n\u003cli\u003eConnections: RCA inputs and outputs, gold-plated, plus ground terminal\u003c\/li\u003e\n\u003cli\u003ePower supply: external power supply, ± 18 V DC\u003c\/li\u003e\n\u003cli\u003ePower consumption: 3 W in operation, \u0026lt; 0.3 W standby\u003c\/li\u003e\n\u003cli\u003eHousing: aluminium machined from a solid block, silver anodised\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 118 × 42 × 145 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 1.2 kg (unit and power supply)\u003c\/li\u003e\n\u003cli\u003eWhat's included: phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat's the load resistance of the Basic V2 in MC mode?\u003c\/h3\u003e\n\u003cp\u003eFixed at 500 ohms with 270 picofarads, not adjustable. This value works very well with the vast majority of common MC cartridges. If your cartridge's manufacturer explicitly calls for a different load, tell us in advance – then we'll look together at whether the Basic V2 is the right choice.\u003c\/p\u003e\n\u003ch3\u003eWhere do I switch between MM and MC?\u003c\/h3\u003e\n\u003cp\u003eThe switch sits on the underside of the housing. That sounds inconvenient, but it's deliberate: no extra switch in the signal path, no accidental mis-operation mid-use. You set it once for your cartridge and then leave it alone.\u003c\/p\u003e\n\u003ch3\u003eWhat does the subsonic filter do?\u003c\/h3\u003e\n\u003cp\u003eIt attenuates everything below 20 hertz at 18 decibels per octave and can be switched on per channel. Warped records, footfall and turntable rumble generate energy right there that no one hears – but that visibly makes your woofers work. Get rid of it, and the playback becomes noticeably calmer.\u003c\/p\u003e\n\u003ch3\u003eWhich input on my amplifier should the Basic V2 go into?\u003c\/h3\u003e\n\u003cp\u003eA free high-level input – so AUX, CD, tuner or line. Never the existing phono input, where the signal would be equalised and amplified a second time. Your turntable's ground wire goes to the Basic V2's ground terminal, not to the amplifier.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Basic V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage is only as good as its match to the cartridge. We tell you honestly whether your cartridge suits the fixed loading values, set up tracking force, azimuth and wiring at the same time, and remain reachable later if something does start humming. Call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or write to shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Basic V2 is only as good as what's in front of it: \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e set the basic character, \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e the precision. Brush, scale and cleaning gear are under \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e – and if you're not sure what suits your chain, just get in touch with HD Zürisee in Wädenswil.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989498392912,"sku":null,"price":1250.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-basic-v2-phono-vorverstaerker-silber-schraegansicht.jpg?v=1785846982"},{"product_id":"clearaudionanophonov2bl","title":"Clearaudio Nano Phono V2 Phono Preamp, Black","description":"\u003cp\u003eThe Clearaudio Nano Phono V2 is a compact phono preamp for MM and MC cartridges with a continuously adjustable output level.\u003c\/p\u003e\n\u003cp\u003eIt closes the gap between your turntable and an amplifier that has no phono input, or only a half-hearted one. Mature sound in a footprint the size of a cigarette pack, hand-assembled in Erlangen.\u003c\/p\u003e\n\u003ch2\u003eWhy the Nano Phono V2?\u003c\/h2\u003e\n\u003cp\u003eShort signal paths, a solid aluminium housing against interference, and a stepless level control that lets you match the output precisely to the rest of your chain — up to 10 volts RMS is available, plenty of headroom even for a reluctant high-level input. Jumpers on the underside let the Nano run on both MM and MC systems, and that's also where you set the load impedance for moving coil cartridges. The switchable subsonic filter keeps the rumble from warped records out of the signal.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA fresh, dynamic reproduction with a clean background — 81 dB of signal-to-noise ratio in MM mode is a statement for this size of unit. Bass arrives controlled and punchy, voices and cymbals stay clearly outlined. The Nano colours little: it lets the character of your turntable and cartridge come through, rather than painting over it.\u003c\/p\u003e\n\u003ch3\u003eWho is the Nano Phono V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone setting up their first proper turntable — and for anyone who needs a compact phono stage because there's simply no room left in the rack. To be blunt: for a high-end MC system, the Nano is a size too small; then the Smart Phono V2 or the Basic V2 is the way to go. And if you want to plug in headphones directly, get the headphone version — the Nano Phono V2 has no headphone jack.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small problem-solver with surprisingly few compromises: flexible enough for almost any cartridge, quiet enough for the softest passages, small enough for any shelf. If your amplifier's built-in phono input has left you underwhelmed so far, this is the least complicated way to change that.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Small and affordable, very flexible, spot-on both electrically and mechanically, sonically an engaging performer focused on the essentials.\"\u003c\/em\u003e — FIDELITY (Michael Vrzal), 2016\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamp for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ \/ 220 pF (MM), selectable via jumper (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e MM\/MC switchable via jumper on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.4 dB (20 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB (A) for MM \/ 70 dB (A) for MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.04%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 80 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e continuously adjustable, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e unbalanced RCA, ground terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable via jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.3 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 85 × 25 × 106 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 500 g (preamp with power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere do I connect the Nano Phono V2?\u003c\/h3\u003e\n\u003cp\u003eTo a free high-level input on your amplifier: AUX, CD, tuner or line. Never to an input already labelled \"Phono\" — the signal would be amplified a second time there, and the result would sound like anything but music.\u003c\/p\u003e\n\u003ch3\u003eMM or MC — how do I switch it?\u003c\/h3\u003e\n\u003cp\u003eVia the jumpers on the underside of the housing. That's also where you set the load impedance for moving coil systems and switch on the subsonic filter. Just tell us which cartridge you're running, and we'll give you the right jumper setting straight away.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the Nano Phono V2?\u003c\/h3\u003e\n\u003cp\u003eNo, the Nano Phono V2 has no headphone output and passes its signal only via RCA to your amplifier. If you want to listen directly through headphones, get the Clearaudio Nano Phono Headphone V2 with a built-in headphone amp and 3.5 mm jack.\u003c\/p\u003e\n\u003ch3\u003eWhat's the adjustable output level good for?\u003c\/h3\u003e\n\u003cp\u003eIt balances out cartridges and amplifiers with different output levels. The Nano delivers up to 10 volts RMS, steplessly adjustable downward. This lets you work in a sensible range of your volume control, instead of turning it up to the stop on the very first track.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Nano Phono V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage has to suit the system, not the other way round. We'll work out MM or MC, load impedance and subsonic filter with you before the unit is set up at your place — and our technician Mauri is on hand if anything sticks during setup. Call us: +41 44 680 22 00.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, and the right arm under \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. If you're thinking through the whole chain at once, browse \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989499179344,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-nano-phono-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846947"},{"product_id":"clearaudionanophonov2hbl","title":"Clearaudio Nano Phono Headphone V2, Black","description":"\u003cp\u003eThe Clearaudio Nano Phono Headphone V2 is a compact phono preamp for MM and MC cartridges with a built-in headphone amplifier.\u003c\/p\u003e\n\u003cp\u003eIt takes in the signal from your cartridge and passes it on either to your system or directly to your headphones — handy when the record still needs to spin at half past ten and the rest of the household sees it differently.\u003c\/p\u003e\n\u003ch2\u003eWhy the Nano Phono Headphone V2?\u003c\/h2\u003e\n\u003cp\u003eShort signal paths, a solid aluminium housing against interference, a stepless level control — and, in addition, a genuine headphone amplifier with a 3.5 mm jack on the front. MM\/MC mode, load impedance and the switchable subsonic filter are all set via jumpers on the underside. The RCA output remains available throughout: you don't have to choose between your system and your headphones.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThrough headphones: a direct, immediate reproduction with a calm background — 81 dB of signal-to-noise ratio in MM mode really shows in quiet passages, where a noise floor would otherwise like to tag along. Voices sit tangibly in your head, bass stays controlled rather than bloated. Surprisingly mature for a housing 85 millimetres wide.\u003c\/p\u003e\n\u003ch3\u003eWho is the Nano Phono Headphone V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to listen to vinyl through headphones without adding a second device — and for anyone whose amplifier lacks a usable phono input. To be blunt: very low-impedance or extremely insensitive high-end headphones won't push this small amp to its limits — for those, a dedicated headphone amplifier is the right place to look. And important to know: the headphone output is fed from the phono input. You can't connect a CD player or streamer here — for that you need a headphone amp with a high-level input.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eTwo devices in one housing, without either one feeling like an afterthought. If you mostly listen to your turntable in the evening, and quietly, this is the most elegant solution in the Nano family: compact, flexible, and without an extra box in the rack.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamp for MM and MC cartridges with built-in headphone amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ \/ 220 pF (MM), selectable via jumper (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e MM\/MC switchable via jumper on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.4 dB (20 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB (A) for MM \/ 70 dB (A) for MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.04%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 80 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e continuously adjustable, max. 10 V RMS at 1 kHz (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e present, 3.5 mm jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e unbalanced RCA, ground terminal, headphone jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable via jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.3 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 85 × 25 × 106 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 500 g (preamp with power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat headphone connection does the Nano Phono Headphone V2 have?\u003c\/h3\u003e\n\u003cp\u003eA 3.5 mm jack, fed by its own headphone amplifier inside the housing. Headphones with a 6.3 mm plug connect via a simple adapter. You adjust the volume using the unit's stepless level control.\u003c\/p\u003e\n\u003ch3\u003eCan I still connect it to my system?\u003c\/h3\u003e\n\u003cp\u003eYes. The RCA output goes to a free high-level input on your amplifier — AUX, CD, tuner or line — never to a phono input. Your system and your headphones aren't mutually exclusive, so there's no cable-swapping circus.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a CD player or streamer to the headphone amp?\u003c\/h3\u003e\n\u003cp\u003eNo. The headphone output is fed exclusively from the phono input; there's no high-level input. If you also want to listen to digital sources through headphones, you'll need an additional headphone amp with a line input — we'll show you suitable models.\u003c\/p\u003e\n\u003ch3\u003eMM or MC — how do I set it?\u003c\/h3\u003e\n\u003cp\u003eVia the jumpers on the underside. There you select the mode, the load impedance for moving coil systems, and the subsonic filter. Tell us which cartridge sits in the arm, and we'll include the right setting straight away.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Nano Phono Headphone V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the phono stage, cartridge and headphones need to match — and that's exactly where we advise you, instead of leaving you alone with a box. Our technician Mauri helps with setup. Reach us on +41 44 680 22 00 or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right headphones under \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eheadphones\u003c\/a\u003e, more amplifiers for them under \u003ca href=\"\/en\/collections\/kopfhorerverstarker\"\u003eheadphone amplifiers\u003c\/a\u003e. On the analogue side, it's worth a look at \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989499212112,"sku":null,"price":490.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-nano-phono-headphone-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846947"},{"product_id":"clearaudionanophonov2hsi","title":"Clearaudio Nano Phono Headphone V2, Silver","description":"\u003cp\u003eThe Clearaudio Nano Phono Headphone V2 is a compact phono preamp for MM and MC cartridges with a built-in headphone amplifier.\u003c\/p\u003e\n\u003cp\u003eIn silver, the little aluminium block looks the part next to most turntables — and functionally it suits anyone who wants to keep listening to records even when the big system is better left off. Headphones in, stylus down, done.\u003c\/p\u003e\n\u003ch2\u003eWhy the Nano Phono Headphone V2?\u003c\/h2\u003e\n\u003cp\u003eBecause it handles the entire chain between cartridge and ear in a single housing. The phono stage applies RIAA equalisation to ± 0.4 dB accuracy, the built-in headphone amplifier drives via a 3.5 mm jack, and the stepless level control determines how loud it gets. MM or MC, load impedance and the subsonic filter are all set via jumpers on the underside — set once correctly, and you'll never touch them again.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calm background and direct, dynamic access. Through headphones, what stands out most is how clean the Nano stays: voices are stable, cymbals don't disintegrate, low end stays dry. It doesn't push its own sound forward but shows you, pretty unforgivingly, what your cartridge can really do.\u003c\/p\u003e\n\u003ch3\u003eWho is the Nano Phono Headphone V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners considerate of their neighbours, for second systems in the home office, and for anyone whose amplifier has no decent phono input. To be blunt: with very low-impedance or particularly quiet high-end headphones, the small amp reaches its limits — then a dedicated headphone amplifier belongs in the chain. And the headphone output is permanently tied to the phono input: you can't feed digital sources like a CD player or streamer in here.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most elegant solution in the Nano family for anyone who mainly enjoys vinyl through headphones. Two functions in a palm-sized housing, neither implemented half-heartedly — and the RCA output still stays free for your system. So you don't have to choose, which is rare enough as it is.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamp for MM and MC cartridges with built-in headphone amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ \/ 220 pF (MM), selectable via jumper (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e MM\/MC switchable via jumper on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.4 dB (20 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB (A) for MM \/ 70 dB (A) for MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.04%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 80 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e continuously adjustable, max. 10 V RMS at 1 kHz (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e present, 3.5 mm jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e unbalanced RCA, ground terminal, headphone jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable via jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.3 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 85 × 25 × 106 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 500 g (preamp with power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat headphone jack does the Nano Phono Headphone V2 have?\u003c\/h3\u003e\n\u003cp\u003eA 3.5 mm jack, powered by its own headphone amplifier inside the aluminium housing. For headphones with a 6.3 mm plug, an adapter is all you need. You set the volume with the stepless level control — no separate headphone volume knob is needed.\u003c\/p\u003e\n\u003ch3\u003eDoes the unit still work with the system, without headphones?\u003c\/h3\u003e\n\u003cp\u003eYes, of course. Via the RCA output, the signal goes to a high-level input on your amplifier — AUX, CD, tuner or line, but never a phono input. You can leave both connected in parallel and decide depending on the time of day.\u003c\/p\u003e\n\u003ch3\u003eCan I connect other sources to the headphone amplifier?\u003c\/h3\u003e\n\u003cp\u003eNo, there is no high-level input. The headphone output is fed exclusively from the phono input and is therefore reserved for the turntable. For digital sources, you'll need a separate headphone amplifier with a line input.\u003c\/p\u003e\n\u003ch3\u003eDoes the Nano suit my moving coil cartridge?\u003c\/h3\u003e\n\u003cp\u003eIn the vast majority of cases, yes: 54 dB of gain and the jumper-selectable load impedance cover common MC cartridges. For very low-output models, it's worth a quick chat with us before you order — that saves you any nasty surprises.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Nano Phono Headphone V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you whether your cartridge and your headphones suit this unit — even when the honest answer is sometimes no. Plus setup help from our technician Mauri in Wädenswil. Get in touch via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find headphones for this amp under \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eheadphones\u003c\/a\u003e, bigger solutions under \u003ca href=\"\/en\/collections\/kopfhorerverstarker\"\u003eheadphone amplifiers\u003c\/a\u003e. On the analogue side, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e are waiting.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989499244880,"sku":null,"price":490.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-phono-vorverstaerker-silber-schraegansicht-kopfhoereranschluss.jpg?v=1785846947"},{"product_id":"clearaudionanophonov2si","title":"Clearaudio Nano Phono V2 Phono Preamp, Silver","description":"\u003cp\u003eThe Clearaudio Nano Phono V2 is a compact phono preamp for MM and MC cartridges with continuously adjustable output level.\u003c\/p\u003e\n\u003cp\u003eIn silver, the little aluminium block looks pleasantly unobtrusive — which is handy, since it's happy sitting right next to the turntable. Its job: turn the tiny signal from your cartridge into a clean, high-level signal, without leaving any signature of its own.\u003c\/p\u003e\n\u003ch2\u003eWhy the Nano Phono V2?\u003c\/h2\u003e\n\u003cp\u003eBecause nothing here was skimped on in the wrong place. The milled aluminium housing keeps interference out, signal paths stay short, and the stepless level control brings the output exactly to the level your amplifier likes — up to 10 volts RMS, if it's a bit hard of hearing. MM or MC operation and the load impedance are set via jumpers on the underside, and the subsonic filter is switched right alongside them.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calm background and dynamic, direct access: 81 dB signal-to-noise in MM and RIAA accuracy of ± 0.4 dB are why voices stay solid and cymbals don't blur. Low end comes dry rather than mushy. The Nano shows you what your cartridge can do — for better or worse.\u003c\/p\u003e\n\u003ch3\u003eWho is the Nano Phono V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor beginners with a good turntable, for anyone with an amplifier without a usable phono input, and for anyone who's run out of rack space. To be blunt: if you're already running a high-end MC cartridge, step up a level — Smart Phono V2 or Basic V2. And if you want to plug headphones in directly, reach for the Headphone variant instead; this model has no headphone jack.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA lot of technology in a small footprint, without showing off: flexible with cartridges, quiet enough for quiet music, and robust enough to simply keep working for years. The Nano is the unfussy answer to why vinyl through the built-in phono input has never quite clicked before.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Small and affordable, very flexible, electrically and mechanically spot-on, sonically a compelling performer focused on the essentials.\"\u003c\/em\u003e – FIDELITY (Michael Vrzal), 2016\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamp for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ \/ 220 pF (MM), selectable via jumper (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e MM\/MC switchable via jumper on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.4 dB (20 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB (A) for MM \/ 70 dB (A) for MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.04%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 80 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e continuously adjustable, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs and outputs:\u003c\/strong\u003e unbalanced RCA, ground terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable via jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.3 W, standby \u0026lt; 0.3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 85 × 25 × 106 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 500 g (preamp with power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamp, external power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich input does the Nano Phono V2 go into?\u003c\/h3\u003e\n\u003cp\u003eA free high-level input — AUX, CD, tuner or line. Never a phono input: there, the signal would be equalised and amplified a second time, and then even the best pressing sounds like a tin can.\u003c\/p\u003e\n\u003ch3\u003eHow do I set the Nano up for my cartridge?\u003c\/h3\u003e\n\u003cp\u003eUsing the jumpers on the underside, you select MM or MC, the load impedance for moving-coil cartridges, and the subsonic filter. Tell us your cartridge and we'll give you the right configuration — saving you the guesswork.\u003c\/p\u003e\n\u003ch3\u003eDoes the Nano Phono V2 have a headphone output?\u003c\/h3\u003e\n\u003cp\u003eNo. This model passes its signal to the system exclusively via RCA. For listening directly through headphones, there's the otherwise identical Nano Phono Headphone V2, which additionally has a built-in headphone amplifier with a 3.5 mm jack.\u003c\/p\u003e\n\u003ch3\u003eHow loud can the output be?\u003c\/h3\u003e\n\u003cp\u003eMaximum 10 volts RMS at 1 kHz, and you can turn this level down continuously. That means the Nano suits quiet MC cartridges just as well as loud MM cartridges, without your amplifier immediately hitting its limit.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Nano Phono V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause years of experience tell us which phono stage suits which cartridge — and because you have a contact person here in Wädenswil if the chain ever hums. Get in touch: WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find matching cartridges under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, turntables under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and arms under \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e. Everything about the black groove is gathered in \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989499277648,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-nano-phono-v2-phono-vorverstaerker-silber-schraegansicht.jpg?v=1785846987"},{"product_id":"clearaudiosmartphonov2bl","title":"Clearaudio Smart Phono V2 Phono Preamplifier, Black","description":"\u003cp\u003eThe Clearaudio Smart Phono V2 is a phono preamplifier for MM and MC cartridges that you can fine-tune exactly to your system using switches on the underside of the unit.\u003c\/p\u003e\n\u003cp\u003eIt does exactly one thing, and does it right: turning the tiny signal from your stylus into a clean, neutral line-level signal. No display, no app, no menu with fourteen sound profiles. Set it up once and you'll never open the lid again – and that's exactly how it should be.\u003c\/p\u003e\n\u003ch2\u003eWhy the Smart Phono V2?\u003c\/h2\u003e\n\u003cp\u003eThe solid aluminium housing shields the sensitive circuitry from interference, the external plug-in power supply keeps mains noise at a distance, and separate SMD circuits handle MM and MC – switchable per channel. You also choose the MC load impedance between 50 Ω and 5 kΩ, the input capacitance in three steps, and can switch in the subsonic filter when needed, which keeps record warp and footfall out of the deep bass. A level control on the unit adjusts the output level to match the rest of your chain.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eQuiet. The Smart Phono V2 lays a very low-noise background under the music – 85 dB signal-to-noise ratio for MM is the sober figure behind that. Bass lines arrive with contour instead of bloat, voices stand freely between the speakers, and the RIAA curve stays within ± 0.3 dB across the whole range. It tells you the truth about your records, even when that's occasionally inconvenient.\u003c\/p\u003e\n\u003ch3\u003eWho is the Smart Phono V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who takes their turntable seriously and has outgrown the built-in phono stage of an integrated amplifier – the step up is clearly audible. Plain talk about what it's not for: if you're running an extreme low-output MC and chasing the very last bit of resolution, you're better served by the larger Balance V2. And if you want to plug headphones straight into the unit, reach for the Headphone version instead – the Smart Phono V2 deliberately has no headphone output.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA safe bet in the upper mid-range: small, unassuming, durable and grown-up in sound. At HD Zürisee in Wädenswil we like devices that don't demand attention and still deliver every day – the Smart Phono V2 is one of them. What the trade press says: \"A neat little phono preamplifier with a rich, refined sound and practical adjustment options\" – AREA DVD, Test smart phono V2, 03\/2026.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier for MM and MC, switchable per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ (MM) \/ 50 Ω, 100 Ω, 500 Ω, 1 kΩ, 5 kΩ selectable (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 150 pF, 250 pF, 400 pF selectable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.3 dB (10 Hz – 100 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.004 % (MC, A-weighted at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 85 dB (MM) \/ 72 dB (MC), A-weighted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 90 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e adjustable via level control on the unit, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not fitted (only on the Smart Phono Headphone V2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e unbalanced RCA input and output, ground terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e switchable subsonic filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external plug-in power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.7 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 95 × 34 × 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 620 g (preamplifier and power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL027\/B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamplifier, external plug-in power supply (± 18 V DC \/ 300 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I set up the Smart Phono V2 for my cartridge?\u003c\/h3\u003e\n\u003cp\u003eVia small switches on the underside of the unit. There you choose MM or MC per channel, the MC load impedance between 50 Ω and 5 kΩ, the input capacitance in three steps, and the subsonic filter. If you like, we'll set the unit up to match your system before handover.\u003c\/p\u003e\n\u003ch3\u003eDo I need extra resistor plugs for MC?\u003c\/h3\u003e\n\u003cp\u003eNo. The MC load impedance is selectable directly on the unit in five steps from 50 Ω to 5 kΩ, plus input capacitance at 150, 250 and 400 pF. That covers practically every common MC cartridge without hanging extra plugs in the signal path.\u003c\/p\u003e\n\u003ch3\u003eWhich input on my amplifier does the Smart Phono V2 belong to?\u003c\/h3\u003e\n\u003cp\u003eA free line-level input – AUX, CD, Line or Tuner. Never an existing phono input, or the signal gets equalised twice and ends up far too loud. Your turntable's ground wire goes to the Smart Phono's ground terminal, not to the amplifier. That reliably keeps hum out of the system.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the Smart Phono V2?\u003c\/h3\u003e\n\u003cp\u003eNo, this model has no headphone output – it delivers its signal solely via the RCA outputs to your amplifier. If you want to listen through headphones straight from the unit, the Smart Phono Headphone V2 with its 3.5 mm jack is the right choice. We're happy to tell you which variant suits your chain.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Smart Phono V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage only sounds good once it's matched to the cartridge. We set impedance, capacitance and gain to fit and advise you on the whole chain – from stylus to amplifier. Behind that stands an experienced in-house team. Call us: +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe right \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e decides the result at least as much as the phono stage – you'll find the selection there. \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e pair well too, and for the last bit of quiet in the system take a look at \u003ca href=\"\/en\/collections\/netzfilter-stromaufbereitung\"\u003eMains filters \u0026amp; power conditioning\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989500227920,"sku":null,"price":750.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-smart-phono-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846988"},{"product_id":"clearaudiosmartphonov2hbl","title":"Clearaudio Smart Phono Headphone V2, Black","description":"\u003cp\u003eThe Clearaudio Smart Phono Headphone V2 is a phono preamplifier for MM and MC cartridges with a built-in headphone output that equalises the stylus signal and can feed it straight to your headphones.\u003c\/p\u003e\n\u003cp\u003eThat's the short answer to a very everyday situation: it's late, the system should stay off, but the record is already on the platter. That's exactly what this version is for.\u003c\/p\u003e\n\u003ch2\u003eWhy the Smart Phono Headphone V2?\u003c\/h2\u003e\n\u003cp\u003eThe phono stage is the same as in the Smart Phono V2: separate SMD circuits for MM and MC, milled aluminium housing, external plug-in power supply, fine-tuning via switches on the underside. Added to that is the headphone output as a 3.5 mm jack; you set the volume with the unit's level control. The RCA outputs for connecting to your amplifier are still there, unchanged.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThrough headphones, the quiet of the circuit becomes especially clear: 85 dB signal-to-noise ratio for MM, over 90 dB channel separation, RIAA within ± 0.3 dB. Details that get lost in the room through speakers sit right at your ear – fingers on strings, breathing pauses, the reverberation of a recording space. Vinyl up close, without anyone in the next room finding out.\u003c\/p\u003e\n\u003ch3\u003eWho is the Smart Phono Headphone V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who listens to a lot of vinyl but can't always listen loud – flat living, late hours, sleeping housemates. One device instead of two, one power supply instead of two, one less cable run. Plain talk about the limits: the input is a pure phono input. You can't connect a DAC or CD player here – so it doesn't work as a universal headphone amp for your whole system. And if you own particularly hard-to-drive headphones, you'll get further with a standalone headphone amplifier.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA smart combination for vinyl listeners with headphone ambitions: the same honest phono stage as in the Smart Phono V2, plus an output that counts exactly when the speakers have to stay silent. If you're unsure whether the Headphone version or the base model suits your setup, we'll sort that out at HD Zürisee in Wädenswil in five minutes on the phone.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier for MM and MC with headphone output, switchable per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ (MM) \/ 50 Ω, 100 Ω, 500 Ω, 1 kΩ, 5 kΩ selectable (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 150 pF, 250 pF, 400 pF selectable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.3 dB (10 Hz – 100 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.004 % (MC, A-weighted at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 85 dB (MM) \/ 72 dB (MC), A-weighted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 90 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e adjustable via level control on the unit, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e fitted, 3.5 mm jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e unbalanced RCA input and output, ground terminal, headphone jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e switchable subsonic filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external plug-in power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.7 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 95 × 34 × 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 620 g (preamplifier and power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL027\/H\/B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamplifier, external plug-in power supply (± 18 V DC \/ 300 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich headphone jack does the Smart Phono Headphone V2 have?\u003c\/h3\u003e\n\u003cp\u003eA 3.5 mm jack socket. Headphones with a 6.3 mm plug connect via an adapter – most good headphones come with one anyway. You set the volume directly with the unit's level control; no extra amplifier is needed for headphone use.\u003c\/p\u003e\n\u003ch3\u003eCan I also connect a CD player or DAC to the Smart Phono Headphone V2?\u003c\/h3\u003e\n\u003cp\u003eNo. The input is a pure phono input for MM and MC cartridges and expects a very small signal. High-level sources belong on your amplifier or on a standalone headphone amplifier. If you need both, we're happy to show you sensible combinations.\u003c\/p\u003e\n\u003ch3\u003eHow do I set up the unit for my cartridge?\u003c\/h3\u003e\n\u003cp\u003eVia switches on the underside of the unit. You choose MM or MC per channel, the MC load impedance from 50 Ω to 5 kΩ, the input capacitance at 150, 250 or 400 pF, and switch in the subsonic filter as needed. If you like, we'll take care of the setup before handover.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference from the Smart Phono V2?\u003c\/h3\u003e\n\u003cp\u003eThe phono stage is identical – same gain, same adjustment options, same measured values. The Headphone version adds a headphone output with a 3.5 mm jack. Anyone who'll never listen directly from the unit saves with the base model; anyone who wants to listen to records quietly in the evening is in the right place here.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Smart Phono Headphone V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause two things need to fit together: the setup for your cartridge and the choice of headphones. We sort out both with you, rather than leaving you alone with a box – including service from our own in-house technician. Reach us on +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right headphones under \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eHeadphones\u003c\/a\u003e, the right \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e right next to them. Add \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e – and if the same phono stage without a headphone output is enough for you, you'll find it under \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono preamplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989500260688,"sku":null,"price":800.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-smart-phono-headphone-v2-phono-vorverstaerker-schwarz-schraegansicht.jpg?v=1785846986"},{"product_id":"clearaudiosmartphonov2hsi","title":"Clearaudio Smart Phono Headphone V2, Silver","description":"\u003cp\u003eThe Clearaudio Smart Phono Headphone V2 is a phono preamplifier for MM and MC cartridges with a built-in headphone output that lets you listen straight from the unit, without going via the rest of your system.\u003c\/p\u003e\n\u003cp\u003eIn Silver it's a small, cleanly milled block of aluminium that takes on two jobs: phono equalisation and headphone listening at the turntable. One less box in the rack, one less power supply under the sideboard.\u003c\/p\u003e\n\u003ch2\u003eWhy the Smart Phono Headphone V2?\u003c\/h2\u003e\n\u003cp\u003eUnder the hood works the same technology as in the Smart Phono V2: two separate SMD circuits for MM and MC, switchable per channel, load impedance from 50 Ω to 5 kΩ, input capacitance in three steps, a switchable subsonic filter against record warp. The plug-in power supply sits outside the housing, where it can't do any harm. Added to that is the 3.5 mm headphone jack, whose level you set on the unit's control.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA phono stage that leaves nothing to be desired in measurement terms – ± 0.3 dB RIAA accuracy across ten octaves, under 0.004 % distortion, more than 90 dB channel separation – and a headphone path that brings that cleanliness straight to your ear. On headphones you hear surface noise just as clearly as the silence between notes, and both belong to listening to vinyl.\u003c\/p\u003e\n\u003ch3\u003eWho is the Smart Phono Headphone V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners in flats, for late nights, for anyone who doesn't see headphones as a compromise. Also for small setups where one less device simply means more space. Plain talk: the input accepts phono signals only – you can't connect a streamer, DAC or CD player here, so the unit isn't a universal headphone amp for your whole system. And for particularly power-hungry headphones, a standalone headphone amplifier remains the stronger solution.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eTwo functions, one housing, no compromises on the phono stage – for many vinyl listeners that's exactly the right equation. Which headphones suit it and how the unit should be set up for your cartridge is something we'd rather discuss once, calmly, at HD Zürisee in Wädenswil, than have you try three times yourself.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier for MM and MC with headphone output, switchable per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ (MM) \/ 50 Ω, 100 Ω, 500 Ω, 1 kΩ, 5 kΩ selectable (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 150 pF, 250 pF, 400 pF selectable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.3 dB (10 Hz – 100 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.004 % (MC, A-weighted at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 85 dB (MM) \/ 72 dB (MC), A-weighted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 90 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e adjustable via level control on the unit, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e fitted, 3.5 mm jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e unbalanced RCA input and output, ground terminal, headphone jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e switchable subsonic filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external plug-in power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.7 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 95 × 34 × 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 620 g (preamplifier and power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL027\/H\/S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamplifier, external plug-in power supply (± 18 V DC \/ 300 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich headphones can I connect?\u003c\/h3\u003e\n\u003cp\u003eThe output is a 3.5 mm jack socket; models with a 6.3 mm plug run via a simple adapter. For common headphones in the mid impedance range, the power is quite sufficient. Tell us which model you have or are considering – then we'll tell you honestly whether it's a good match.\u003c\/p\u003e\n\u003ch3\u003eIs the phono stage the same as in the Smart Phono V2?\u003c\/h3\u003e\n\u003cp\u003eYes. Gain, load matching, RIAA accuracy and signal-to-noise ratio are identical; the Headphone version simply adds the headphone output. Both units behave the same on your amplifier. So the extra cost buys you the headphone path, not a better phono stage.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a source other than my turntable?\u003c\/h3\u003e\n\u003cp\u003eNo. The input is designed solely for MM and MC cartridges and expects a very small signal. A CD player, DAC or streamer would overdrive it hopelessly. Such sources belong on your amplifier or on a separate headphone amplifier.\u003c\/p\u003e\n\u003ch3\u003eHow do I set up the unit for my cartridge?\u003c\/h3\u003e\n\u003cp\u003eVia the switches on the underside: MM or MC per channel, MC load impedance in five steps between 50 Ω and 5 kΩ, input capacitance at 150, 250 or 400 pF, plus the switchable subsonic filter. We'll do the basic setup for you if you like, before the unit reaches you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Smart Phono Headphone V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with us you get more than just a device – you get the matching set-up: cartridge, phono stage, headphones. Our in-house team has been doing this for decades, and our technician Mauri takes care of service and installation. Reach us on +41 44 680 22 00, by WhatsApp on \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe right \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eheadphones\u003c\/a\u003e make half the difference with this unit, the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e the other half. You'll also find \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e and further \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e in our range.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989500293456,"sku":null,"price":800.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-smart-phono-headphone-v2-phono-vorverstaerker-silber-schraegansicht.jpg?v=1785847024"},{"product_id":"clearaudiosmartphonov2si","title":"Clearaudio Smart Phono V2 Phono Preamplifier, Silver","description":"\u003cp\u003eThe Clearaudio Smart Phono V2 is a phono preamplifier for MM and MC cartridges that you can fine-tune exactly to your system using switches on the underside of the unit.\u003c\/p\u003e\n\u003cp\u003eIn Silver it disappears unobtrusively among the other components in the rack – which suits it well, since it doesn't want to stand out anyway. Its job is to amplify and equalise the tiny signal from the stylus, without adding any character of its own.\u003c\/p\u003e\n\u003ch2\u003eWhy the Smart Phono V2?\u003c\/h2\u003e\n\u003cp\u003eTwo separate SMD circuits for MM and MC, a milled aluminium housing acting as a shield against interference, and an external plug-in power supply that banishes the transformer from the housing. You handle the fine-tuning yourself: MC load impedance in five steps from 50 Ω to 5 kΩ, input capacitance at 150, 250 or 400 pF, plus a switchable subsonic filter against record warp. The level control on top of the housing adjusts the output level to match the rest of your chain.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA very quiet background – 85 dB signal-to-noise ratio for MM, 72 dB for MC – and a RIAA equalisation that stays within ± 0.3 dB across ten octaves. In practice that means clear separation of instruments, bass with contour instead of mush, and sibilants that stay sibilants instead of becoming an ordeal.\u003c\/p\u003e\n\u003ch3\u003eWho is the Smart Phono V2 for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners who've maxed out the built-in phono input of their integrated amplifier and want a real step forward. Honestly, what it's not made for: an extreme low-output MC demands more than this class delivers – that's where the Balance V2's territory begins. And if you want to listen through headphones straight from the unit, you'll need the Headphone version; this model has no headphone output.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eLittle device, big effect. The Smart Phono V2 in Silver is one of those purchases you stop thinking about after three years, because it simply works. At HD Zürisee in Wädenswil we recommend it regularly for exactly that reason. From the trade press: \"A neat little phono preamplifier with a rich, refined sound and practical adjustment options\" – AREA DVD, Test smart phono V2, 03\/2026.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier for MM and MC, switchable per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 34 dB (MM) \/ 54 dB (MC), each at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 47 kΩ (MM) \/ 50 Ω, 100 Ω, 500 Ω, 1 kΩ, 5 kΩ selectable (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 150 pF, 250 pF, 400 pF selectable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRIAA accuracy:\u003c\/strong\u003e ± 0.3 dB (10 Hz – 100 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion:\u003c\/strong\u003e \u0026lt; 0.004 % (MC, A-weighted at 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 85 dB (MM) \/ 72 dB (MC), A-weighted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 90 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e adjustable via level control on the unit, max. 10 V RMS at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e not fitted (only on the Smart Phono Headphone V2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e unbalanced RCA input and output, ground terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e switchable subsonic filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e external plug-in power supply, ± 18 V DC \/ 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e max. 2.7 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e anodised aluminium, silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 95 × 34 × 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 620 g (preamplifier and power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel no.:\u003c\/strong\u003e EL027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e phono preamplifier, external plug-in power supply (± 18 V DC \/ 300 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere do I set MM or MC?\u003c\/h3\u003e\n\u003cp\u003eOn the underside of the unit. Small switches let you switch between MM and MC per channel, choose the MC load impedance from 50 Ω to 5 kΩ, set the input capacitance and switch in the subsonic filter. If you like, we'll set everything up to match your cartridge before handover.\u003c\/p\u003e\n\u003ch3\u003eDoes the Smart Phono V2 suit my MC cartridge?\u003c\/h3\u003e\n\u003cp\u003eVery likely, yes. With 54 dB gain in MC mode and five selectable load impedances, it covers most common MC cartridges. Only in truly special cases with extremely low output voltage does it get tight – tell us your cartridge and we'll give you a definite answer.\u003c\/p\u003e\n\u003ch3\u003eWhere on the amplifier – and what do I do with the ground wire?\u003c\/h3\u003e\n\u003cp\u003eThe RCA output belongs on a free line-level input such as AUX, CD or Line, never on an existing phono input. Your turntable's ground wire gets screwed to the Smart Phono V2's ground terminal, not to the amplifier. That usually takes care of the typical vinyl hum.\u003c\/p\u003e\n\u003ch3\u003eDoes the Smart Phono V2 have a headphone output?\u003c\/h3\u003e\n\u003cp\u003eNo. This model delivers its signal solely via the RCA jacks and needs an amplifier behind it. If you want to listen through headphones straight from the unit, go for the Smart Phono Headphone V2 with its 3.5 mm jack. We're happy to help you work out which of the two variants makes more sense.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Smart Phono V2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause matching the unit to your cartridge decides the sound – and nobody does that for you if the device simply arrives in a box. We configure the phono stage to fit and think through the whole chain. Questions? +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA good \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e is essential with the Smart Phono V2 – it decides the most. Continue with \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e; cleaning brushes, tracking force scales and alignment aids are found under \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eTurntable accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989500752208,"sku":null,"price":750.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-smart-phono-v2-phono-vorverstaerker-silber-schraegansicht.jpg?v=1785847024"},{"product_id":"clearaudiostatementphono","title":"Clearaudio Statement Phono Preamplifier","description":"\u003cp\u003eThe Clearaudio Statement Phono is a fully balanced phono preamplifier in dual-mono design that runs on batteries during listening and thereby fully disconnects itself from the mains.\u003c\/p\u003e\n\u003cp\u003eIt sits at the very top of Clearaudio's electronics range: two separate housings, two phono inputs, two extra line inputs – and an adjustability more familiar from a measurement lab than a living room.\u003c\/p\u003e\n\u003ch2\u003eWhy the Statement Phono?\u003c\/h2\u003e\n\u003cp\u003eWhile listening, the circuit runs exclusively on batteries; the separate power supply housing recharges them in the background – mains interference simply never reaches the signal path. The left and right channels are built as a fully separate dual-mono design in Class A. The MC input can be set by remote control to eight termination values between 5 ohms and 47 kilohms, plus phono balancing of ± 6 dB at 50 Hz, 6 kHz and 10 kHz, along with selectable equalisation curves. So if you're playing a historical pressing with its own curve, you no longer have to listen to it wrong.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA background so quiet that a singer's breath and fingers sliding across strings become physically present. With a 90 dB signal-to-noise ratio and distortion under 0.0035 percent, the spatial depth holds even through the densest orchestral tutti instead of collapsing. And you hear every change to the termination value or equalisation immediately – this unit holds nothing back, not even mistakes further up the chain.\u003c\/p\u003e\n\u003ch3\u003eWho is the Statement Phono for?\u003c\/h3\u003e\n\u003cp\u003eFor uncompromising analogue listeners with a top-tier turntable, for whom this chapter is then closed. Plain talk: two housings of 435 × 350 millimetres each and around 34 kilograms together need planning – an ordinary wooden shelf is overwhelmed, and the power supply unit needs its own space. If you play a record twice a month or are still at the start of your analogue chain, you're better served, more honestly, with a phono stage like the Basic V2 – and have a lot more rack space left over.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Statement Phono is no longer fine-tuning, it's a category of its own: battery operation, true dual mono and an adjustability that really gets everything out of a good cartridge. A unit for people who know exactly why they want something like this – and whose remaining chain already plays at this level. Otherwise, what you'll mainly hear very clearly is what's still missing before it.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: fully balanced phono preamplifier, dual mono, Class A\u003c\/li\u003e\n\u003cli\u003eDesign: two housings – preamplifier and battery\/power supply unit\u003c\/li\u003e\n\u003cli\u003ePower supply: battery operation while listening (2 × 18 V \/ 3.2 Ah per channel), recharging in the background\u003c\/li\u003e\n\u003cli\u003eGain: +34 dB (MM) \/ +54 dB (MC) at 1 kHz, switchable\u003c\/li\u003e\n\u003cli\u003eMC termination values: 8 steps by remote control – 5 Ω, 25 Ω, 50 Ω, 100 Ω, 250 Ω, 500 Ω, 1 kΩ, 47 kΩ\u003c\/li\u003e\n\u003cli\u003eEqualisation: RIAA ± 0.05 dB (20 Hz – 100 kHz), curves selectable\u003c\/li\u003e\n\u003cli\u003ePhono balancing: ± 6 dB at 50 Hz, 6 kHz and 10 kHz, by remote control\u003c\/li\u003e\n\u003cli\u003eDistortion: \u0026lt; 0.0035 % (5 mV \/ 1 kHz), \u0026lt; 0.0015 % (0.5 mV \/ 1 kHz)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 90 dB\u003c\/li\u003e\n\u003cli\u003eInputs: Phono 1 balanced XLR, Phono 2 RCA, Line 1 balanced XLR, Line 2 RCA, Aux 3.5 mm jack on the front\u003c\/li\u003e\n\u003cli\u003eOutputs: balanced XLR and RCA\u003c\/li\u003e\n\u003cli\u003eOutput impedance \/ output voltage: 10 Ω \/ \u0026gt; 12 V\u003c\/li\u003e\n\u003cli\u003ePower consumption: max. 200 W, 50–100 W in operation, \u0026lt; 0.5 W standby\u003c\/li\u003e\n\u003cli\u003eDimensions per housing (W × H × D): 435 × 100 × 350 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 12 kg (preamplifier), approx. 22 kg (power supply unit)\u003c\/li\u003e\n\u003cli\u003eIncluded: preamplifier, battery\/power supply unit, remote control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich termination values can I set on the Statement Phono?\u003c\/h3\u003e\n\u003cp\u003eEight steps, all switchable by remote control: 5, 25, 50, 100, 250, 500 and 1000 ohms, plus 47 kilohms. Add to that selectable equalisation curves and phono balancing of ± 6 decibels at 50 hertz, 6 and 10 kilohertz. You hear the change from your seat, without getting up.\u003c\/p\u003e\n\u003ch3\u003eWhy does the Statement Phono run on batteries?\u003c\/h3\u003e\n\u003cp\u003eBecause batteries deliver a steady current without mains hum and high-frequency interference. With the fractions of a millivolt that an MC cartridge puts out, exactly this noise floor decides how much fine detail is left in the end. The power supply recharges in the background and stays out of the picture while you listen.\u003c\/p\u003e\n\u003ch3\u003eWhat inputs and outputs does the Statement Phono have?\u003c\/h3\u003e\n\u003cp\u003eTwo phono inputs, one balanced as XLR and one as RCA, plus two line inputs in the same split. On the front sits an aux input as a 3.5 mm jack. On the output side there are balanced XLR and unbalanced RCA jacks, at 10 ohms output impedance.\u003c\/p\u003e\n\u003ch3\u003eDo I have to switch the unit off to charge it?\u003c\/h3\u003e\n\u003cp\u003eNo. While listening, the circuit runs exclusively off the batteries; in standby the charging electronics top them up again for the next session. So you switch it on and off completely normally, and the unit takes care of the rest itself.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Statement Phono from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage of this class stands or falls with placement, grounding and setup. We plan the setup with you, align tonearm, cartridge and termination values together and stay reachable from Wädenswil even after delivery. Call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAt this level, the source decides: matching \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e are found in their respective categories, everything about record care under \u003ca href=\"\/en\/collections\/alles-vinyl\"\u003eEverything Vinyl\u003c\/a\u003e. Which combination really comes together in your room is something we'd rather discuss directly with you.\u003c\/p\u003e","brand":"Clearaudio","offers":[{"title":"Default Title","offer_id":52989500981584,"sku":null,"price":29000.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/clearaudio-statement-phono-vorverstaerker-frontansicht.jpg?v=1785847226"},{"product_id":"goldnoteph1000black","title":"Gold Note PH-1000 Phono Preamplifier, Black","description":"\u003cp\u003eThe Gold Note PH-1000 is an absolute top-tier phono stage – the unit that sits between your turntable and your amplifier, bringing the tiny signal from the cartridge's stylus up to listening level, equalizing it correctly and as cleanly as technically possible.\u003c\/p\u003e\n\u003cp\u003eAccording to Gold Note, the PH-1000 is simply the best phono stage the Tuscan house has ever built – and you can feel that in every screw. Here in elegant black, which recedes into any system and lets the engineering speak.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-1000?\u003c\/h2\u003e\n\u003cp\u003eBecause it can do things almost no other phono stage in the world can. Over 40 built-in equalization curves plus four freely adjustable ones mean: you don't just play RIAA records, but also old Decca, Columbia or Telefunken pressings exactly as they were cut back then. Three independent inputs – two RCA, one balanced via XLR – accept MM and MC cartridges alike. And despite all this richness, operation runs through a single rotary control, Gold Note's \"Single Knob Control,\" plus a color display. No menu maze, no fumbling with switches in the dark behind the unit.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA phono stage is supposed to do one thing above all: add nothing and take nothing away. The PH-1000 works entirely in the analog domain – digital control is completely separated from the signal path. The result is an extremely low-noise, high-gain sound with the calm and resolution that finally let your cartridge show what it can do. The Class A headphone output is no token feature either: turntable in, headphones on – the signal path from vinyl to ear doesn't get any shorter than that.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor analog enthusiasts and collectors who listen to more than just standard pressings, run several turntables or cartridges in parallel, and want to get the last bit out of their record collection. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you listen to a single modern record through one MM cartridge and are happy with RIAA, you're paying here for possibilities you'll never use. A smaller phono stage does the job just as well.\u003c\/p\u003e\n\u003ch3\u003eDo I need the optional tube or power-supply upgrade?\u003c\/h3\u003e\n\u003cp\u003eNo, the PH-1000 plays fully out of the box. But if you want to push right to the limit: Gold Note offers external power supplies (PSU-1250 \/ PSU-1000) and an external tube output stage (TUBE-1012 \/ TUBE-1006) as later upgrades. So you can start small and expand over the years.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-1000 isn't a rational purchase, it's a commitment to the record. Anyone with a serious vinyl collection who wants to hear it without compromise will find one of the most flexible and cleanest phono stages around here. Come visit us in Wädenswil and bring your favorite record – ideally one that wasn't cut to RIAA.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for MM and MC cartridges, fully analog signal path\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA (single-ended), 1× XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eGain: 14 gain steps (40dB MM \/ 65dB MC, ±3\/±6\/±9dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 12 steps (RCA) or 8 steps (XLR), 10Ω to 100kΩ\u003c\/li\u003e\n\u003cli\u003eCapacitance (MM): 7 steps (0–1000pF)\u003c\/li\u003e\n\u003cli\u003eEqualization: over 40 EQ curves incl. 4 freely adjustable, Neumann option\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with color display, remote control\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA, XLR, Class A headphone; optional Class A line preamp with volume control\u003c\/li\u003e\n\u003cli\u003eMax. output level: 2.5V RMS\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): 0.01%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 100dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 110dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 100Ω (unbalanced) \/ 300Ω (balanced)\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external power supplies PSU-1250 \/ PSU-1000, tube stage TUBE-1012 \/ TUBE-1006\u003c\/li\u003e\n\u003cli\u003ePower consumption: 30W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 375mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12kg\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat do the 40+ EQ curves on the PH-1000 give you?\u003c\/h3\u003e\n\u003cp\u003eBefore the RIAA standard was introduced in the mid-1950s, every label cut its records to its own equalization curve. With the PH-1000's EQ curves you hear such historic pressings exactly as they were intended – instead of bending them through the wrong curve. For modern records, RIAA is enough, and of course the PH-1000 handles that too.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH-1000 suit MM and MC cartridges?\u003c\/h3\u003e\n\u003cp\u003eYes. Each of the three inputs can be set independently to MM or MC, with its own gain, its own load resistance and, for MM, its own capacitance. So you can connect three different turntables or systems in parallel and switch between them at the press of a button.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-1000 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage of this class needs proper setup and a trained ear, not just a shipping box. We set the PH-1000 up to match your cartridge, advise you on the right chain, and are here for you in Wädenswil – after the purchase too. We ship free of charge anywhere in Switzerland from CHF 190.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509697872,"sku":"304403","price":10900.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-1000-phono-vorverstaerker-schwarz-frontansicht.jpg?v=1785926074"},{"product_id":"goldnoteph1000gold","title":"Gold Note PH-1000 Phono Preamplifier, Gold","description":"\u003cp\u003eThe Gold Note PH-1000 is an absolute top-tier phono stage – the unit that sits between your turntable and your amplifier, bringing the tiny signal from the cartridge's stylus up to listening level, equalizing it correctly and as cleanly as technically possible.\u003c\/p\u003e\n\u003cp\u003eAccording to Gold Note, the PH-1000 is simply the best phono stage the Tuscan house has ever built – and you can feel that in every screw. Here in the elegant gold finish, which gives this flagship unit the visual presence to match.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-1000?\u003c\/h2\u003e\n\u003cp\u003eBecause it can do things almost no other phono stage in the world can. Over 40 built-in equalization curves plus four freely adjustable ones mean: you don't just play RIAA records, but also old Decca, Columbia or Telefunken pressings exactly as they were cut back then. Three independent inputs – two RCA, one balanced via XLR – accept MM and MC cartridges alike. And despite all this richness, operation runs through a single rotary control, Gold Note's \"Single Knob Control,\" plus a color display. No menu maze, no fumbling with switches in the dark behind the unit.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA phono stage is supposed to do one thing above all: add nothing and take nothing away. The PH-1000 works entirely in the analog domain – digital control is completely separated from the signal path. The result is an extremely low-noise, high-gain sound with the calm and resolution that finally let your cartridge show what it can do. The Class A headphone output is no token feature either: turntable in, headphones on – the signal path from vinyl to ear doesn't get any shorter than that.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor analog enthusiasts and collectors who listen to more than just standard pressings, run several turntables or cartridges in parallel, and want to get the last bit out of their record collection. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you listen to a single modern record through one MM cartridge and are happy with RIAA, you're paying here for possibilities you'll never use. A smaller phono stage does the job just as well.\u003c\/p\u003e\n\u003ch3\u003eDo I need the optional tube or power-supply upgrade?\u003c\/h3\u003e\n\u003cp\u003eNo, the PH-1000 plays fully out of the box. But if you want to push right to the limit: Gold Note offers external power supplies (PSU-1250 \/ PSU-1000) and an external tube output stage (TUBE-1012 \/ TUBE-1006) as later upgrades. So you can start small and expand over the years.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-1000 isn't a rational purchase, it's a commitment to the record. Anyone with a serious vinyl collection who wants to hear it without compromise will find one of the most flexible and cleanest phono stages around here. Come visit us in Wädenswil and bring your favorite record – ideally one that wasn't cut to RIAA.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for MM and MC cartridges, fully analog signal path\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA (single-ended), 1× XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eGain: 14 gain steps (40dB MM \/ 65dB MC, ±3\/±6\/±9dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 12 steps (RCA) or 8 steps (XLR), 10Ω to 100kΩ\u003c\/li\u003e\n\u003cli\u003eCapacitance (MM): 7 steps (0–1000pF)\u003c\/li\u003e\n\u003cli\u003eEqualization: over 40 EQ curves incl. 4 freely adjustable, Neumann option\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with color display, remote control\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA, XLR, Class A headphone; optional Class A line preamp with volume control\u003c\/li\u003e\n\u003cli\u003eMax. output level: 2.5V RMS\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): 0.01%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 100dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 110dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 100Ω (unbalanced) \/ 300Ω (balanced)\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external power supplies PSU-1250 \/ PSU-1000, tube stage TUBE-1012 \/ TUBE-1006\u003c\/li\u003e\n\u003cli\u003ePower consumption: 30W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 375mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12kg\u003c\/li\u003e\n\u003cli\u003eFinish: Gold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat do the 40+ EQ curves on the PH-1000 give you?\u003c\/h3\u003e\n\u003cp\u003eBefore the RIAA standard was introduced in the mid-1950s, every label cut its records to its own equalization curve. With the PH-1000's EQ curves you hear such historic pressings exactly as they were intended – instead of bending them through the wrong curve. For modern records, RIAA is enough, and of course the PH-1000 handles that too.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH-1000 suit MM and MC cartridges?\u003c\/h3\u003e\n\u003cp\u003eYes. Each of the three inputs can be set independently to MM or MC, with its own gain, its own load resistance and, for MM, its own capacitance. So you can connect three different turntables or systems in parallel and switch between them at the press of a button.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-1000 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage of this class needs proper setup and a trained ear, not just a shipping box. We set the PH-1000 up to match your cartridge, advise you on the right chain, and are here for you in Wädenswil – after the purchase too. We ship free of charge anywhere in Switzerland from CHF 190.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509730640,"sku":"304404","price":10900.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-1000-phono-vorverstaerker-gold-frontansicht.jpg?v=1785926074"},{"product_id":"goldnoteph1000sil","title":"Gold Note PH-1000 Phono Preamplifier, Silver","description":"\u003cp\u003eThe Gold Note PH-1000 is an absolute top-tier phono stage – the unit that sits between your turntable and your amplifier, bringing the tiny signal from the cartridge's stylus up to listening level, equalizing it correctly and as cleanly as technically possible.\u003c\/p\u003e\n\u003cp\u003eAccording to Gold Note, the PH-1000 is simply the best phono stage the Tuscan house has ever built – and you can feel that in every screw. Here in elegant silver, which suits any high-end system in a classic way.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-1000?\u003c\/h2\u003e\n\u003cp\u003eBecause it can do things almost no other phono stage in the world can. Over 40 built-in equalization curves plus four freely adjustable ones mean: you don't just play RIAA records, but also old Decca, Columbia or Telefunken pressings exactly as they were cut back then. Three independent inputs – two RCA, one balanced via XLR – accept MM and MC cartridges alike. And despite all this richness, operation runs through a single rotary control, Gold Note's \"Single Knob Control,\" plus a color display. No menu maze, no fumbling with switches in the dark behind the unit.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA phono stage is supposed to do one thing above all: add nothing and take nothing away. The PH-1000 works entirely in the analog domain – digital control is completely separated from the signal path. The result is an extremely low-noise, high-gain sound with the calm and resolution that finally let your cartridge show what it can do. The Class A headphone output is no token feature either: turntable in, headphones on – the signal path from vinyl to ear doesn't get any shorter than that.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor analog enthusiasts and collectors who listen to more than just standard pressings, run several turntables or cartridges in parallel, and want to get the last bit out of their record collection. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you listen to a single modern record through one MM cartridge and are happy with RIAA, you're paying here for possibilities you'll never use. A smaller phono stage does the job just as well.\u003c\/p\u003e\n\u003ch3\u003eDo I need the optional tube or power-supply upgrade?\u003c\/h3\u003e\n\u003cp\u003eNo, the PH-1000 plays fully out of the box. But if you want to push right to the limit: Gold Note offers external power supplies (PSU-1250 \/ PSU-1000) and an external tube output stage (TUBE-1012 \/ TUBE-1006) as later upgrades. So you can start small and expand over the years.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-1000 isn't a rational purchase, it's a commitment to the record. Anyone with a serious vinyl collection who wants to hear it without compromise will find one of the most flexible and cleanest phono stages around here. Come visit us in Wädenswil and bring your favorite record – ideally one that wasn't cut to RIAA.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for MM and MC cartridges, fully analog signal path\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA (single-ended), 1× XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eGain: 14 gain steps (40dB MM \/ 65dB MC, ±3\/±6\/±9dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 12 steps (RCA) or 8 steps (XLR), 10Ω to 100kΩ\u003c\/li\u003e\n\u003cli\u003eCapacitance (MM): 7 steps (0–1000pF)\u003c\/li\u003e\n\u003cli\u003eEqualization: over 40 EQ curves incl. 4 freely adjustable, Neumann option\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with color display, remote control\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA, XLR, Class A headphone; optional Class A line preamp with volume control\u003c\/li\u003e\n\u003cli\u003eMax. output level: 2.5V RMS\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): 0.01%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 100dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 110dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 100Ω (unbalanced) \/ 300Ω (balanced)\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external power supplies PSU-1250 \/ PSU-1000, tube stage TUBE-1012 \/ TUBE-1006\u003c\/li\u003e\n\u003cli\u003ePower consumption: 30W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 375mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12kg\u003c\/li\u003e\n\u003cli\u003eFinish: Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat do the 40+ EQ curves on the PH-1000 give you?\u003c\/h3\u003e\n\u003cp\u003eBefore the RIAA standard was introduced in the mid-1950s, every label cut its records to its own equalization curve. With the PH-1000's EQ curves you hear such historic pressings exactly as they were intended – instead of bending them through the wrong curve. For modern records, RIAA is enough, and of course the PH-1000 handles that too.\u003c\/p\u003e\n\u003ch3\u003eDoes the PH-1000 suit MM and MC cartridges?\u003c\/h3\u003e\n\u003cp\u003eYes. Each of the three inputs can be set independently to MM or MC, with its own gain, its own load resistance and, for MM, its own capacitance. So you can connect three different turntables or systems in parallel and switch between them at the press of a button.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-1000 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage of this class needs proper setup and a trained ear, not just a shipping box. We set the PH-1000 up to match your cartridge, advise you on the right chain, and are here for you in Wädenswil – after the purchase too. We ship free of charge anywhere in Switzerland from CHF 190.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509763408,"sku":"304411","price":10900.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-1000-phono-vorverstaerker-silber-frontansicht.jpg?v=1785926074"},{"product_id":"goldnoteph10black","title":"Gold Note PH-10 Phono Preamplifier, Black","description":"\u003cp\u003eThe Gold Note PH-10 is a fully analog phono preamplifier for MM and MC cartridges – the unit that amplifies and correctly equalizes the delicate signal from your turntable before it reaches the amplifier.\u003c\/p\u003e\n\u003cp\u003eIt comes from Gold Note's Series 10 and was built to the same standard as its bigger siblings – just considerably more affordable. Here in classic black, which blends discreetly into any rack.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-10?\u003c\/h2\u003e\n\u003cp\u003eBecause it lets you adjust things that elsewhere require the manual and a flashlight. Where competitors in this class work with tiny DIP switches on the back of the unit, on the PH-10 you control everything comfortably via a single dial – Gold Note's “Single Knob Control” – and a colour display: cartridge type (MM\/MC), gain, load resistance and the equalization curve. Two separate RCA inputs mean you can connect two turntables or tonearms at the same time and set each one individually. The settings stay saved even when the unit is switched off.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 works fully analog in the signal path; the digital control only serves the display and doesn't interfere with the music. The result is a low-noise, natural and dynamic sound that gives your cartridge room to breathe. Three selectable equalization curves – RIAA, Decca London and American Columbia, each with an “Enhanced” option – cleanly bring out even older or unusual pressings.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who takes vinyl seriously but doesn't have the budget for a flagship phono stage – and who appreciates the flexibility of using MM and MC, two turntables and different curves. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you run just a single MM cartridge and listen to plain RIAA-standard records, you can be perfectly happy with a simpler phono stage. The PH-10's strength lies in its versatility.\u003c\/p\u003e\n\u003ch3\u003eWhat do the three equalization curves do?\u003c\/h3\u003e\n\u003cp\u003eNot every record follows the RIAA standard – older Decca and Columbia pressings in particular were cut differently. With the matching curves you hear them the way they were meant to sound. For modern records you simply stay on RIAA.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 is one of the most versatile phono preamplifiers in its price class and a genuine piece of Gold Note engineering at a sensible price. Anyone who wants more later can upgrade with the external PSU-10 power supply. Come by in Wädenswil and bring your cartridge along – we'll set up the PH-10 correctly on site.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: fully analog phono preamplifier for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA, each independently adjustable and stored\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eEqualization curves: RIAA, Decca London, American Columbia – each with “Enhanced” option\u003c\/li\u003e\n\u003cli\u003eGain: 45 dB (MM) to 65 dB (MC), 4 steps (0 dB, ±3 dB, +6 dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 9 steps (10 \/ 22 \/ 47 \/ 100 \/ 220 \/ 470 \/ 1000 Ω, 22 kΩ, 47 kΩ)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 10 Hz \/ 36 dB per octave\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt; 0.002%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 102 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 122 dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 500 Ω\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with 2.8-inch colour display, firmware update via USB\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external PSU-10 power supply (also compatible with PSU-5)\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the PH-10 and the PH-1000?\u003c\/h3\u003e\n\u003cp\u003eThe PH-1000 is Gold Note's flagship with over 40 EQ curves, three inputs including XLR and a Class-A headphone output. The PH-10 offers the three most important curves, two inputs and the same thoughtful ease of use – at a fraction of the price. For the vast majority of vinyl collections, it's exactly right.\u003c\/p\u003e\n\u003ch3\u003eCan I connect two turntables at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. Via the two separate RCA inputs you connect two turntables or tonearms and set each input individually to its cartridge. The settings stay saved.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage only sounds good when it's matched to the cartridge. We set up the PH-10 correctly for you, advise you on the right chain, and are there for you in Wädenswil – even after the purchase. From CHF 190 we ship free of charge throughout Switzerland.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509796176,"sku":"304412","price":1790.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-10-phono-vorverstaerker-schwarz-frontansicht.jpg?v=1785926074"},{"product_id":"goldnoteph10gold","title":"Gold Note PH-10 Phono Preamplifier, Gold","description":"\u003cp\u003eThe Gold Note PH-10 is a fully analog phono preamplifier for MM and MC cartridges – the unit that amplifies and correctly equalizes the delicate signal from your turntable before it reaches the amplifier.\u003c\/p\u003e\n\u003cp\u003eIt comes from Gold Note's Series 10 and was built to the same standard as its bigger siblings – just considerably more affordable. Here in the elegant gold finish, with Gold Note's signature look.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-10?\u003c\/h2\u003e\n\u003cp\u003eBecause it lets you adjust things that elsewhere require the manual and a flashlight. Where competitors in this class work with tiny DIP switches on the back of the unit, on the PH-10 you control everything comfortably via a single dial – Gold Note's “Single Knob Control” – and a colour display: cartridge type (MM\/MC), gain, load resistance and the equalization curve. Two separate RCA inputs mean you can connect two turntables or tonearms at the same time and set each one individually. The settings stay saved even when the unit is switched off.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 works fully analog in the signal path; the digital control only serves the display and doesn't interfere with the music. The result is a low-noise, natural and dynamic sound that gives your cartridge room to breathe. Three selectable equalization curves – RIAA, Decca London and American Columbia, each with an “Enhanced” option – cleanly bring out even older or unusual pressings.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who takes vinyl seriously but doesn't have the budget for a flagship phono stage – and who appreciates the flexibility of using MM and MC, two turntables and different curves. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you run just a single MM cartridge and listen to plain RIAA-standard records, you can be perfectly happy with a simpler phono stage. The PH-10's strength lies in its versatility.\u003c\/p\u003e\n\u003ch3\u003eWhat do the three equalization curves do?\u003c\/h3\u003e\n\u003cp\u003eNot every record follows the RIAA standard – older Decca and Columbia pressings in particular were cut differently. With the matching curves you hear them the way they were meant to sound. For modern records you simply stay on RIAA.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 is one of the most versatile phono preamplifiers in its price class and a genuine piece of Gold Note engineering at a sensible price. Anyone who wants more later can upgrade with the external PSU-10 power supply. Come by in Wädenswil and bring your cartridge along – we'll set up the PH-10 correctly on site.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: fully analog phono preamplifier for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA, each independently adjustable and stored\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eEqualization curves: RIAA, Decca London, American Columbia – each with “Enhanced” option\u003c\/li\u003e\n\u003cli\u003eGain: 45 dB (MM) to 65 dB (MC), 4 steps (0 dB, ±3 dB, +6 dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 9 steps (10 \/ 22 \/ 47 \/ 100 \/ 220 \/ 470 \/ 1000 Ω, 22 kΩ, 47 kΩ)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 10 Hz \/ 36 dB per octave\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt; 0.002%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 102 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 122 dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 500 Ω\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with 2.8-inch colour display, firmware update via USB\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external PSU-10 power supply (also compatible with PSU-5)\u003c\/li\u003e\n\u003cli\u003eFinish: Gold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the PH-10 and the PH-1000?\u003c\/h3\u003e\n\u003cp\u003eThe PH-1000 is Gold Note's flagship with over 40 EQ curves, three inputs including XLR and a Class-A headphone output. The PH-10 offers the three most important curves, two inputs and the same thoughtful ease of use – at a fraction of the price. For the vast majority of vinyl collections, it's exactly right.\u003c\/p\u003e\n\u003ch3\u003eCan I connect two turntables at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. Via the two separate RCA inputs you connect two turntables or tonearms and set each input individually to its cartridge. The settings stay saved.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage only sounds good when it's matched to the cartridge. We set up the PH-10 correctly for you, advise you on the right chain, and are there for you in Wädenswil – even after the purchase. From CHF 190 we ship free of charge throughout Switzerland.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509828944,"sku":"304413","price":1790.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-10-phono-vorverstaerker-gold-frontansicht.jpg?v=1785926074"},{"product_id":"goldnoteph10silver","title":"Gold Note PH-10 Phono Preamplifier, Silver","description":"\u003cp\u003eThe Gold Note PH-10 is a fully analog phono preamplifier for MM and MC cartridges – the unit that amplifies and correctly equalizes the delicate signal from your turntable before it reaches the amplifier.\u003c\/p\u003e\n\u003cp\u003eIt comes from Gold Note's Series 10 and was built to the same standard as its bigger siblings – just considerably more affordable. Here in elegant silver, which pairs well with light-coloured components.\u003c\/p\u003e\n\u003ch2\u003eWhy the PH-10?\u003c\/h2\u003e\n\u003cp\u003eBecause it lets you adjust things that elsewhere require the manual and a flashlight. Where competitors in this class work with tiny DIP switches on the back of the unit, on the PH-10 you control everything comfortably via a single dial – Gold Note's “Single Knob Control” – and a colour display: cartridge type (MM\/MC), gain, load resistance and the equalization curve. Two separate RCA inputs mean you can connect two turntables or tonearms at the same time and set each one individually. The settings stay saved even when the unit is switched off.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 works fully analog in the signal path; the digital control only serves the display and doesn't interfere with the music. The result is a low-noise, natural and dynamic sound that gives your cartridge room to breathe. Three selectable equalization curves – RIAA, Decca London and American Columbia, each with an “Enhanced” option – cleanly bring out even older or unusual pressings.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who takes vinyl seriously but doesn't have the budget for a flagship phono stage – and who appreciates the flexibility of using MM and MC, two turntables and different curves. \u003cstrong\u003eBottom line:\u003c\/strong\u003e if you run just a single MM cartridge and listen to plain RIAA-standard records, you can be perfectly happy with a simpler phono stage. The PH-10's strength lies in its versatility.\u003c\/p\u003e\n\u003ch3\u003eWhat do the three equalization curves do?\u003c\/h3\u003e\n\u003cp\u003eNot every record follows the RIAA standard – older Decca and Columbia pressings in particular were cut differently. With the matching curves you hear them the way they were meant to sound. For modern records you simply stay on RIAA.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PH-10 is one of the most versatile phono preamplifiers in its price class and a genuine piece of Gold Note engineering at a sensible price. Anyone who wants more later can upgrade with the external PSU-10 power supply. Come by in Wädenswil and bring your cartridge along – we'll set up the PH-10 correctly on site.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: fully analog phono preamplifier for MM and MC cartridges\u003c\/li\u003e\n\u003cli\u003eInputs: 2× RCA, each independently adjustable and stored\u003c\/li\u003e\n\u003cli\u003eOutputs: RCA (unbalanced) and XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eEqualization curves: RIAA, Decca London, American Columbia – each with “Enhanced” option\u003c\/li\u003e\n\u003cli\u003eGain: 45 dB (MM) to 65 dB (MC), 4 steps (0 dB, ±3 dB, +6 dB)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 9 steps (10 \/ 22 \/ 47 \/ 100 \/ 220 \/ 470 \/ 1000 Ω, 22 kΩ, 47 kΩ)\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 10 Hz \/ 36 dB per octave\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt; 0.002%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 102 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 122 dB\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 500 Ω\u003c\/li\u003e\n\u003cli\u003eControl: Single Knob Control (SKC) with 2.8-inch colour display, firmware update via USB\u003c\/li\u003e\n\u003cli\u003eUpgradeable: external PSU-10 power supply (also compatible with PSU-5)\u003c\/li\u003e\n\u003cli\u003eFinish: Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the PH-10 and the PH-1000?\u003c\/h3\u003e\n\u003cp\u003eThe PH-1000 is Gold Note's flagship with over 40 EQ curves, three inputs including XLR and a Class-A headphone output. The PH-10 offers the three most important curves, two inputs and the same thoughtful ease of use – at a fraction of the price. For the vast majority of vinyl collections, it's exactly right.\u003c\/p\u003e\n\u003ch3\u003eCan I connect two turntables at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. Via the two separate RCA inputs you connect two turntables or tonearms and set each input individually to its cartridge. The settings stay saved.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gold Note PH-10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono stage only sounds good when it's matched to the cartridge. We set up the PH-10 correctly for you, advise you on the right chain, and are there for you in Wädenswil – even after the purchase. From CHF 190 we ship free of charge throughout Switzerland.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearms\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989509861712,"sku":"304414","price":1790.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-ph-10-phono-vorverstaerker-silber-frontansicht.jpg?v=1785926074"},{"product_id":"hifisetmoon761a791dac","title":"MOON 761 + 791 HiFi Set, North Collection","description":"\u003cp\u003eThe MOON 761 + 791 HiFi Set is a separately built high-end stereo combination from the MOON North Collection, pairing the reference 761 power amplifier with the 791 streaming preamplifier and DAC to form a complete system.\u003c\/p\u003e\n\n\u003cp\u003eSource, control and power deliberately sit in two chassis – not for reasons of space, but because this very separation is what keeps the sound clean. Via MOONLink, the two units still work together as one.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this set?\u003c\/h2\u003e\n\u003cp\u003eBecause here two specialists do their job, instead of one all-rounder compromising a little on everything. The 761 is pure power: 200 watts per channel at 8 ohms, 400 watts at 4 ohms and up to 600 watts in mono operation, plus a damping factor of 800 for an iron grip on the bass. MDCA technology, true dual-mono and the absence of global negative feedback keep the signal free of distortion.\u003c\/p\u003e\n\u003cp\u003eThe 791 is the brain: streaming via MiND 2 (Roon Ready, Tidal, Qobuz), conversion via the MDE-2 engine with ES9038Pro up to DSD256 and MQA, six digital inputs, HDMI ARC for the TV and a full-fledged MM\/MC phono stage for your record collection. Volume, source selection and operation are all handled centrally by it – including the smart BRM-1 remote control.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe first thing you notice is the calm: a pitch-black background from which the music emerges, rather than growing out of a quiet base noise. Because the sensitive digital and phono section in the 791 is physically separated from the power amplifier's powerful supply, interference stays out.\u003c\/p\u003e\n\u003cp\u003eOn top of that, the 761 plays out its reserves: large floorstanding speakers that sound laboured on weaker amplifiers gain contour and pace here. From the quiet strike of a triangle to a full orchestral tutti, everything comes through with dynamics and transparency – without sounding hard or strained at high levels.\u003c\/p\u003e\n\n\u003ch3\u003eWho is this set for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants an uncompromising, separately built reference chain from a single series: demanding speakers, larger rooms, a mix of hi-res streaming and vinyl – and the ambition to squeeze the last bit of cleanliness out of the system.\u003c\/p\u003e\n\u003cp\u003eHonest take: for a small living room with compact speakers, this is two sizes too big – a room like that will never call on such reserves. If you want everything in one chassis, a network integrated amplifier like the MOON 371 makes more sense. And if you only listen to music casually over Bluetooth, this is a race car for the traffic jam: it works, but it's a shame for the equipment.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe 761\/791 combination is MOON's statement in the reference class: powerful enough for any speaker, calm enough for every detail, and future-proof for years thanks to a modern streaming platform. Not a loud statement, but assured substance. We at HD Zürisee in Wädenswil will tell you honestly which speakers this duo really needs – and match the entire chain to your room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e StereoNET Applause Award for the North combination 791 + 761 – \"MOON's new 791 is truly a North star…\" (StereoNET, 2023).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMOON 761 – power amplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (stereo, 8 Ω):\u003c\/strong\u003e 200 W per channel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (stereo, 4 Ω):\u003c\/strong\u003e 400 W per channel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (mono, 8 Ω):\u003c\/strong\u003e 600 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 2 Hz – 100 kHz (+0 \/ −3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N @ 200 W):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDamping factor:\u003c\/strong\u003e 800\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× XLR (balanced), 1× RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTechnology:\u003c\/strong\u003e MDCA, dual-mono, no global negative feedback, mono bridging\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 14 × 44.5 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 36 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMOON 791 – network player \/ preamplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND 2 – Roon Ready, Tidal Connect, Qobuz Connect and more\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC:\u003c\/strong\u003e MDE-2 (ES9038Pro), PCM up to 32-bit \/ 384 kHz, DSD256, MQA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 6 (AES\/EBU, 2× coaxial, 2× optical, USB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e 1× HDMI with ARC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA, 1× XLR, phono MM\/MC (four-stage adjustable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio (preamplifier):\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTechnology:\u003c\/strong\u003e M-VOL3, fully balanced, BRM-1 remote control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 10.2 × 44.9 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 19 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 761, 791, 2× power cable, 1× BRM-1 remote control, MOONLink cable, 2× Wi-Fi antenna (791), spare fuses, manuals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the MOON 761 + 791 set?\u003c\/strong\u003e\u003cbr\u003eThe reference 761 power amplifier and the 791 streaming preamplifier with DAC from the North Collection, plus BRM-1 remote control, power cables, MOONLink cable and Wi-Fi antennas. That gives you a complete system – all that's missing are speakers and cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a separate power amplifier and preamplifier instead of one integrated amplifier?\u003c\/strong\u003e\u003cbr\u003eBecause the separation keeps the sound clean. The sensitive digital and phono section in the 791 is physically separated from the 761's powerful power supply, which keeps electrical interference out of the signal. If you prefer something more compact, the MOON 371 offers an all-in-one solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the set Roon Ready and streaming-capable?\u003c\/strong\u003e\u003cbr\u003eYes. Via the 791's MiND 2 platform, the set is Roon Ready and supports Tidal, Qobuz and other services. Even without a subscription you can play internet radio and files from your network; hi-res up to DSD256 and MQA are also processed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers suit the MOON 761 + 791?\u003c\/strong\u003e\u003cbr\u003eDemanding floorstanders and larger bookshelf speakers in the upper segment. With 200 watts at 8 ohms and a damping factor of 800, the 761 controls even demanding speakers in large rooms. We're happy to work out in person which models harmonise with your room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 761 + 791 set at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause this reference system lives or dies by correct setup. We help you choose the right speakers, set up MiND 2 and your sources, and as an authorised MOON dealer in Wädenswil we take care of warranty, delivery and service – advice by phone, WhatsApp or email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e, and cabling under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. The full range is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989513564496,"sku":null,"price":27980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-761-791-hifi-set-north-collection-frontansicht.png?v=1786531765"},{"product_id":"hifisetmoon861a891dac","title":"MOON 861 + 891 HiFi Set, North Collection","description":"\u003cp\u003eThe MOON 861 + 891 HiFi Set is the flagship duo of the MOON North Collection: a separately built reference stereo combination consisting of the high-power 861 power amplifier and the 891 streaming preamplifier with DAC.\u003c\/p\u003e\n\n\u003cp\u003eMore amplification, more conversion, more calm than anything else in the MOON range – built for speakers and rooms that really want to be challenged. Via MOONLink, both units play together as one.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this set?\u003c\/h2\u003e\n\u003cp\u003eBecause nothing is shared here that sounds better kept separate. The 861 is raw control: 300 watts per channel at 8 ohms, 600 watts at 4 ohms and up to 800 watts as a monoblock, plus a damping factor of 900 that keeps even large woofers on a short leash. MDCA technology, true dual-mono and the absence of global negative feedback keep the signal clean.\u003c\/p\u003e\n\u003cp\u003eThe 891 is the reference-level control centre: the MDE-3 engine converts PCM up to 32-bit \/ 384 kHz, native DSD256 and MQA, the M-RAY2 volume control operates with extremely low noise, and the MOON Damping Base (MDB) mechanically decouples the sensitive electronics from the surface underneath. Add to that streaming via MiND 2 (Roon Ready, Tidal, Qobuz), six digital inputs, HDMI ARC and a fully balanced MM\/MC phono stage.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eComposure you feel more than you hear. Even as the level rises, the playback stays relaxed – no compressing, no sharpening, just more music. In almost every situation the 861 has more reserve than the room ever calls for, and that's exactly what you hear in its calm.\u003c\/p\u003e\n\u003cp\u003eAdd to that the silence of the 891: a background free of base noise, against which the finest details – a cymbal's decay, a concert hall's reverb – stay clearly present instead of disappearing. Soundstage, depth layering and dynamics feel bigger and more natural as a result than with smaller chains.\u003c\/p\u003e\n\n\u003ch3\u003eWho is this set for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eFor demanding floorstanding or large speakers in big, well set-up rooms – and for listeners who want the maximum from both digital sources and vinyl alike, without thinking about external phono stages or converter boxes.\u003c\/p\u003e\n\u003cp\u003eHonest take: for normal living-room volume in a medium-sized room, this is clearly oversized – most of its potential simply sleeps. If you want something a bit more compact but still at a high level, the 761 + 791 suits you better; if you want everything in one chassis, look at the MOON 371. And yes, the 861 weighs around 58 kilograms – think about where it will stand before you buy, not once you're unpacking it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe 861\/891 isn't a device you buy out of reason, but for perfection: the most uncompromising chain MOON currently builds. When the speakers and the room are right, the search ends here. We at HD Zürisee in Wädenswil are, as a long-standing MOON partner, the right people to match such a system realistically to your room and your speakers – honestly, even when a size smaller makes more sense.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e StereoNET Applause Award for the North combination 891 + 861 – \"The 891 and 861 sit atop MOON's prestigious North Collection with good reason…\" (StereoNET, 2024).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMOON 861 – power amplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (stereo, 8 Ω):\u003c\/strong\u003e 300 W per channel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (stereo, 4 Ω):\u003c\/strong\u003e 600 W per channel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput power (mono, 8 Ω):\u003c\/strong\u003e 800 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 2 Hz – 100 kHz (+0 \/ −3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N @ 300 W):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDamping factor:\u003c\/strong\u003e 900\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 119 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 2× 1,500 VA low-noise toroidal transformers, 240,000 µF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTechnology:\u003c\/strong\u003e MDCA, dual-mono, no global negative feedback, mono mode (bridged)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 21 × 60.9 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 58 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMOON 891 – network player \/ preamplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND 2 – Roon Ready, Tidal Connect, Qobuz Connect and more\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC:\u003c\/strong\u003e MDE-3, PCM up to 32-bit \/ 384 kHz, native DSD256, MQA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 6 (AES\/EBU, 2× coaxial, 2× optical, USB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e 1× HDMI with ARC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA, 2× XLR, phono MM\/MC (adjustable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio (preamplifier):\u003c\/strong\u003e 125 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTechnology:\u003c\/strong\u003e M-RAY2 volume control, MOON Damping Base (MDB), fully balanced, BRM-1 remote control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 14 × 44.9 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 861, 891, 2× power cable, 1× BRM-1 remote control, MOONLink cable, 2× Wi-Fi antenna (891), spare fuses, manuals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's included in the MOON 861 + 891 set?\u003c\/strong\u003e\u003cbr\u003eThe high-power 861 power amplifier and the 891 streaming preamplifier with DAC from the North Collection, plus BRM-1 remote control, power cables, MOONLink cable and Wi-Fi antennas. Apart from speakers and cables, the system is then complete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow big and heavy is the set?\u003c\/strong\u003e\u003cbr\u003eThe 861 measures 48.1 × 21 × 60.9 cm and weighs around 58 kg, while the 891 is noticeably more manageable at 48.1 × 14 × 44.9 cm and around 25 kg. Plan a stable, well-ventilated spot for the power amplifier – ideally close to the floor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the set Roon Ready and streaming-capable?\u003c\/strong\u003e\u003cbr\u003eYes. Via the 891's MiND 2 platform, the set is Roon Ready and supports Tidal, Qobuz and other services. Music also plays without a paid subscription – internet radio or files from your home network, for instance. Hi-res up to DSD256 and MQA are also processed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference to the MOON 761 + 791 set?\u003c\/strong\u003e\u003cbr\u003eMore power and more reserves. The 861 delivers 300 instead of 200 watts at 8 ohms and a higher damping factor, while the 891 adds the MDE-3 engine, M-RAY2 control and the MOON Damping Base. For large speakers and rooms, the 861\/891 is the more uncompromising choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 861 + 891 set at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause a flagship system demands proper setup and honest advice, not two boxes. We help with speaker matching, placement and streaming setup, deliver and install on site if you like, and as an authorised MOON dealer in Wädenswil we handle warranty and service – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right floorstanding speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e, and high-quality cabling under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. The full range is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989513597264,"sku":null,"price":41980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-861-891-hifi-set-north-collection-frontansicht.png?v=1786531765"},{"product_id":"kecesephonoplus","title":"KECES Ephono+ Phono Preamp with Power Supply","description":"\u003cp\u003eThe KECES Ephono+ is a phono preamp with an outboard linear power supply – for MM and MC cartridges and even for optical systems (DS Audio). Two separate enclosures keep the sensitive amplification away from the power supply.\u003c\/p\u003e\n\u003cp\u003eThe strict separation of power supply and audio circuitry is the whole point here: a cartridge's signal is tiny and reacts sensitively to interference. Supplied as a preamp plus separate power supply with connecting cable.\u003c\/p\u003e\n\u003ch2\u003eWhy the KECES Ephono+?\u003c\/h2\u003e\n\u003cp\u003eBecause separate enclosures minimise interference. The external power supply works internally at ±24 V via a KECES H-Sonic toroidal transformer. Gain and impedance are finely adjustable, a switchable subsonic filter removes the lowest interference frequencies from warped records, and connections are available both balanced (XLR) and unbalanced (RCA).\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA lot of calm around the music: thanks to the low-noise power supply, even the high MC gain stays clean, and the subsonic filter makes the bass punchier by removing inaudible interference energy from the chain.\u003c\/p\u003e\n\u003ch3\u003eWho is the Ephono+ suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlain talk:\u003c\/strong\u003e the Ephono+ needs room for two enclosures – if you want a compact solution to tuck away, this isn't it. In return, Optical support (DS Audio) is rare in this price class. A precision tool for anyone who wants to listen deep into the groove.\u003c\/p\u003e\n\u003ch3\u003eCan I connect optical cartridges (DS Audio)?\u003c\/h3\u003e\n\u003cp\u003eYes, the Ephono+ offers its own gain stages (24\/30 dB) for optical systems – and supplies the power they need at the same time.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA versatile, very quiet phono preamp with the rare Optical option – ideal for demanding MC and DS Audio systems. At HD Zürisee in Wädenswil, we set it up precisely for your cartridge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e \"The Keces Ephono+ convinces across the board, whether the MM input, the MC input, or the one for DS Audio cartridges is active.\" – \u003cem\u003eHIFISTATEMENT, 2025\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data – KECES Ephono+\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono preamp with external linear power supply (two-piece)\u003c\/li\u003e\n\u003cli\u003eCartridges: MM, MC and optical (DS Audio)\u003c\/li\u003e\n\u003cli\u003eInput impedance: MM 47 kΩ \/ MC 56, 100, 220 Ω\u003c\/li\u003e\n\u003cli\u003eInput capacitance: 100 pF\u003c\/li\u003e\n\u003cli\u003eGain: MM 46\/52 dB, MC 66\/72 dB, Optical 24\/30 dB\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: MM 86 dB (A), MC 78 dB (A)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): MM \u0026lt; 0.004 %, MC \u0026lt; 0.03 %\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz–20 kHz, RIAA ±0.2 dB\u003c\/li\u003e\n\u003cli\u003eFilter: switchable subsonic filter\u003c\/li\u003e\n\u003cli\u003eOutputs: XLR (balanced), RCA (unbalanced)\u003c\/li\u003e\n\u003cli\u003ePower supply: H-Sonic toroidal transformer, ±24 V, over-temperature protection (OTP)\u003c\/li\u003e\n\u003cli\u003eDimensions per enclosure (W×D×H): 220 × 220 × 66 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg (preamp) + 3 kg (power supply)\u003c\/li\u003e\n\u003cli\u003eIncluded: preamp, power supply, DC connecting cable, mains cable, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the subsonic filter do?\u003c\/h3\u003e\n\u003cp\u003eIt filters frequencies below the audible range (e.g. caused by record warp), relieving woofers and amplifiers and giving a cleaner spatial image.\u003c\/p\u003e\n\u003ch3\u003eIs the Ephono+ suited to my MC cartridge?\u003c\/h3\u003e\n\u003cp\u003eYes, with up to 72 dB gain and adjustable impedance, it also suits low-output MC systems. We work out the right setting together with you based on your cartridge's datasheet.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the KECES Ephono+ from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a phono preamp only shows its potential once properly set up. We adjust gain and impedance to your cartridge – in Wädenswil. Free shipping from CHF 190.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYour \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, a matching \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e and good \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Keces","offers":[{"title":"Default Title","offer_id":52989522313552,"sku":null,"price":1300.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/keces-ephono-plus-phono-vorverstaerker-schraegansicht.jpg?v=1785424025"},{"product_id":"kecess4","title":"KECES S4 Preamplifier","description":"\u003cp\u003eThe KECES S4 is a full-fledged stereo preamplifier with a built-in phono stage for MM, MC and even optical DS Audio cartridges – plus line inputs and its own headphone amplifier, built as two units with an outboard linear power supply.\u003c\/p\u003e\n\u003cp\u003eFrom KECES' Superior Series: a purely analogue, fully balanced build with zero negative feedback and discrete volume control. Supplied as a preamp plus separate power supply with connecting cable and remote control.\u003c\/p\u003e\n\u003ch2\u003eWhy the KECES S4?\u003c\/h2\u003e\n\u003cp\u003eBecause it unites preamp, phono stage and headphone amplifier at a high level in one concept. The outboard linear power supply keeps transformer vibration and magnetic fields away from the tiny phono signals, the R-2R volume control via discrete resistors keeps the channels exactly matched, and the fully balanced, feedback-free signal path stays clean. The phono stage handles MM, MC and – as a world first – optical DS Audio systems.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA lot of calm around the music and a precise, dynamic stage: thanks to the low-noise power supply, even the high MC gain stays clean. From the front you can select inputs and finely adjust volume; the built-in headphone amplifier passes the preamp signal directly and unaltered to your headphones.\u003c\/p\u003e\n\u003ch3\u003eWho is the S4 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlain talk:\u003c\/strong\u003e the S4 is for listeners who want a serious preamp with a first-class phono section – ideal if a DS Audio system is or will be in play. As a pure, standalone phono box, the KECES Ephono+ is the more targeted (and cheaper) choice. And honestly: in pure Class A operation the S4 gets noticeably warm – a closed cabinet without airflow is not its friend.\u003c\/p\u003e\n\u003ch3\u003eCan I connect two turntables or several sources?\u003c\/h3\u003e\n\u003cp\u003eThe S4 offers an MM\/MC phono input, a separate optical DS Audio input as well as line inputs (1× RCA, 2× XLR). So you can flexibly combine a turntable and other sources on one preamp.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA versatile high-end preamp with an exceptionally good phono section including the DS Audio option – cleanly built, honestly tuned. The trade press agrees: hifitest.de rated the S4 in issue 8\/2024 with the top mark 5\/5 and the verdict \"reference class\". At HD Zürisee in Wädenswil, we set gain and impedance exactly to your cartridge and advise you on the right combination.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data – KECES S4\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: stereo preamplifier with phono stage \u0026amp; headphone amplifier (two-piece, external linear power supply)\u003c\/li\u003e\n\u003cli\u003eCircuit: fully balanced dual-mono build, single-ended, zero negative feedback, pure Class A operation\u003c\/li\u003e\n\u003cli\u003eVolume: discrete R-2R resistor control (128 steps)\u003c\/li\u003e\n\u003cli\u003eInputs: MM\/MC phono, DS Audio optical, 1× RCA (line), 2× XLR (line)\u003c\/li\u003e\n\u003cli\u003eOutputs: 2× RCA, 1× XLR, 4-pin XLR headphone (front)\u003c\/li\u003e\n\u003cli\u003ePhono input impedance MC: 56 \/ 100 \/ 220 \/ 470 Ω \/ 47 kΩ; MM: 47 kΩ\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: MM 78 dB, MC 70 dB, Optical 75 dB, Line (RCA\/XLR) 110 dB\u003c\/li\u003e\n\u003cli\u003eIncluded: preamplifier, external linear power supply, 4-pin XLR connecting cable, mains cable, remote control\u003c\/li\u003e\n\u003cli\u003eHousing: brushed aluminium (per unit)\u003c\/li\u003e\n\u003cli\u003eDimensions per enclosure (W×D×H): 300 × 279 × 66 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.5 kg (preamp) + 4.5 kg (power supply)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the S4 a preamplifier or a phono stage?\u003c\/h3\u003e\n\u003cp\u003eBoth: it's a full-fledged line preamplifier with RCA and XLR inputs and additionally a high-quality phono stage for MM, MC and optical DS Audio cartridges. A headphone amplifier is also built in.\u003c\/p\u003e\n\u003ch3\u003eWhat does DS Audio support offer?\u003c\/h3\u003e\n\u003cp\u003eOptical cartridges from DS Audio need special equalisation and power. The S4 provides both – you save yourself a separate DS Audio box and can use this technology directly.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the KECES S4 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a preamp with phono only shows its potential once properly set up. We adjust gain and impedance to your cartridge and tune the chain – in Wädenswil, with our own technician. Free shipping from CHF 190.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifier\u003c\/a\u003e like the KECES S300+, your \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e and good \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Keces","offers":[{"title":"Default Title","offer_id":52989536108880,"sku":null,"price":4300.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/keces-s4-vorverstaerker-frontansicht.jpg?v=1785424294"},{"product_id":"moon110lpv2","title":"MOON 110LP V2 Phono Preamplifier","description":"\u003cp\u003eThe MOON 110LP V2 is a compact, adjustable phono preamplifier from Simaudio that boosts your turntable's weak signal up to line level, applies correct equalisation, and adapts to both MM and MC cartridges.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 110LP V2?\u003c\/h2\u003e\n\u003cp\u003eBecause the phono preamplifier is the crucial link between turntable and amplifier – it's what turns a tiny cartridge signal into audible music in the first place. The 110LP V2 handles this with a low-noise circuit design, an external power supply and precise RIAA equalisation. Dip switches on the underside let you set gain, impedance and capacitance to match your cartridge. That way you get the best out of an affordable MM cartridge just as you would from a demanding MC.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calm, black background against which fine details and overtones clearly stand out. Correctly matched to the cartridge, vinyl sounds neither dull nor harsh, but balanced and dynamic, with a cleanly layered soundstage. For such a compact device, a surprisingly mature, unhurried presentation.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the 110LP V2 for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone whose amplifier has no phono input, or only a basic one, and who wants to hear vinyl at a solid level – with the flexibility to properly match MM and MC.\u003c\/p\u003e\n\u003cp\u003eHonest take: if you already have a high-quality phono stage built into your amplifier, you don't strictly need it. And if you run an uncompromising high-end turntable with an expensive MC cartridge, you're better off looking a step higher straight away – for example at the MOON 310LP with its discrete circuitry and XLR output.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA flexible, low-noise phono preamplifier that punches above its size sonically – the invisible engine that gets your turntable into shape. We at HD Zürisee in Wädenswil will set it up for your cartridge, so it plays correctly right from the first note.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the trade press says\u003c\/h2\u003e\n\u003cp\u003e\"The Moon 110LP v2 remains one of the best of its kind at this level.\" – What Hi-Fi?, 5\/5 stars (What Hi-Fi Award 2024).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e adjustable phono preamplifier for MM and MC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e 40 \/ 54 \/ 60 \/ 66 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImpedance (load):\u003c\/strong\u003e 10 \/ 100 \/ 470 Ω, 1 kΩ, 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCapacitance:\u003c\/strong\u003e 0 \/ 100 \/ 470 pF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e RIAA standard\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 100 dB (MM), \u0026gt; 84 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× stereo RCA (phono)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1× stereo RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 127 × 42 × 165 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 110LP V2, external power supply, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MOON 110LP V2 support MC cartridges?\u003c\/strong\u003e\u003cbr\u003eYes. It's designed for both moving magnet (MM) and moving coil (MC). Dip switches let you fine-tune gain, impedance and capacitance to exactly match your cartridge – that's the key to the best sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need the 110LP V2 if my amplifier already has a phono input?\u003c\/strong\u003e\u003cbr\u003eNot necessarily. If your amplifier only has a basic MM input, or none at all, the 110LP V2 is clearly worthwhile – especially for MC cartridges and if you value a very quiet background.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I set up the 110LP V2 for my cartridge?\u003c\/strong\u003e\u003cbr\u003eVia dip switches on the underside. The right gain and impedance values for your cartridge are listed in the cartridge's datasheet – or we'll set it up for you right at purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 110LP V2 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause a phono preamplifier only sounds right when it's matched to the cartridge. We choose the right settings, tune them to your turntable, and as an authorised MOON dealer in Wädenswil we're here for warranty and service – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, and the right cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e. More MOON devices are shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989540630864,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-110lp-v2-phono-vorverstaerker-frontansicht.jpg?v=1786531763"},{"product_id":"moon310lp","title":"MOON 310LP Phono Preamplifier","description":"\u003cp\u003eThe MOON 310LP is a discretely built high-end phono preamplifier from Simaudio that amplifies your turntable's signal with very low noise, applies precise RIAA equalisation, and adapts comprehensively to MM and MC cartridges.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 310LP?\u003c\/h2\u003e\n\u003cp\u003eBecause MOON relies here on a fully discrete circuit – not a single op-amp in the signal path. That delivers fast transient response and an organic, effortless musicality. An elaborately regulated power supply pushes noise to a minimum, and the wide adjustability of gain, impedance and capacitance via DIP switches makes it a fitting partner for nearly any cartridge. Balanced XLR outputs additionally allow the lowest-noise connection to your preamplifier.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eAn almost eerie silence between the notes, out of which the finest details and spatial information emerge. Playback is three-dimensional, dynamic and cleanly layered – vinyl doesn't sound nostalgically soft here, but precise and alive. This is the kind of phono stage you stop hearing, because only the record speaks.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the 310LP for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for ambitious vinyl listeners with a high-quality turntable and a good MM or MC cartridge who want to get the maximum out of their records and wire balanced.\u003c\/p\u003e\n\u003cp\u003eHonest take: for an entry-level turntable with a standard MM cartridge, the 310LP is overkill – the more compact MOON 110LP V2 is enough there. To get the full benefit, run it in a correspondingly resolving chain.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOne of the sonically strongest phono preamplifiers in its class: discrete, razor-clean and flexible enough for almost any cartridge. Anyone who takes vinyl seriously finds a premium partner for their turntable here. We at HD Zürisee in Wädenswil match it to your cartridge and tell you honestly whether the next step up makes sense for you.\u003c\/p\u003e\n\n\u003ch2\u003eAward\u003c\/h2\u003e\n\u003cp\u003eAwarded \"Reviewers' Choice\" – SoundStage! Hi-Fi (2022) and listed there as a reference component.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e adjustable high-end phono preamplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit:\u003c\/strong\u003e fully discrete, no op-amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCartridges:\u003c\/strong\u003e Moving Magnet (MM) and Moving Coil (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 40 \/ 50 \/ 54 \/ 60 \/ 66 \/ 72 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance (load):\u003c\/strong\u003e 10 \/ 100 \/ 470 Ω, 1 kΩ, 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitance:\u003c\/strong\u003e 0 \/ 100 \/ 470 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqualisation:\u003c\/strong\u003e RIAA standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB (MM), \u0026gt; 90 dB (MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.0005 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× stereo RCA (phono)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1× stereo RCA (unbalanced), 1× stereo XLR (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal power supply:\u003c\/strong\u003e optional (MOON 320S), connection via 4-pin XLR DC input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 178 × 76 × 280 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 310LP, power cable, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the 310LP and the MOON 110LP V2?\u003c\/strong\u003e\u003cbr\u003eThe 310LP is fully discretely built, has a more elaborate power supply, more gain stages, and additionally balanced XLR outputs. It plays even quieter and more resolving – the 110LP V2 is the more compact entry-level solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MOON 310LP have balanced outputs?\u003c\/strong\u003e\u003cbr\u003eYes. Besides the RCA output, it offers a balanced XLR output. That gives you a particularly low-noise connection to a preamplifier with XLR inputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cartridges does the 310LP suit?\u003c\/strong\u003e\u003cbr\u003eMM and MC cartridges. With six gain stages and a wide range of impedance and capacitance settings, it can be precisely matched to almost any cartridge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 310LP at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause a high-end phono stage only shows its potential when set correctly. We select gain and impedance to match your cartridge, advise on wiring, and as an authorised MOON dealer in Wädenswil we're here for warranty and service – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, the right cartridge under \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e. More MOON devices are shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989540991312,"sku":null,"price":2180.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-310lp-phono-vorverstaerker-frontansicht.jpg?v=1786531806"},{"product_id":"moon371bl","title":"MOON 371 Network Integrated Amplifier, Black","description":"\u003cp\u003eThe MOON 371 is a network integrated amplifier from Simaudio that combines amplifier, MiND 2 streamer, DAC, preamplifier and MM\/MC phono stage in one chassis, delivering 100 watts per channel into 8 ohms.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 371?\u003c\/h2\u003e\n\u003cp\u003eBecause it bundles five devices into one chassis – integrated amplifier, streamer, DAC, preamplifier and phono stage – making the equipment tower obsolete. At its core works MDCA technology (MOON Distortion-Cancelling Amplifier), derived from the reference class, which significantly reduces distortion, combined with the hybrid MHP power supply. Into 4 ohms it delivers 200 watts, so it drives more demanding speakers with confidence too. Via the MiND 2 platform you stream from Qobuz, Tidal or Spotify, with Roon Ready and AirPlay included – and the HDMI ARC input brings TV sound cleanly into the system.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA clear, dynamic and calm sound with the typical MOON transparency – whether streamed, played from CD or from vinyl. Voices and instruments are cleanly layered in the room, the bass stays controlled even at higher levels. Thanks to the built-in MM\/MC phono stage, the turntable plays on the same level as the digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the 371 for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants a complete high-end system in one device – with streaming, turntable connection and TV integration, but without a cable jungle and stack of components.\u003c\/p\u003e\n\u003cp\u003eHonest take: if you deliberately build your system from separate components and want to swap out each stage individually, a separated pre-\/power-amp setup gives you more freedom. And for very large, extremely power-hungry speakers in big rooms, a more powerful power amp may be in order.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA well thought-out all-in-one that replaces almost an entire system without compromising on sound – including phono and HDMI ARC, which is by no means a given in this device class. In Black it looks especially understated. We at HD Zürisee in Wädenswil will tell you honestly whether the 371 suits your speakers and your room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e Reference class and 5.0 out of 5 stars, awarded \"Highend-Tipp\" – hifitest 2\/2026.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e network integrated amplifier (all-in-one)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (8 Ω):\u003c\/strong\u003e 100 W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (4 Ω):\u003c\/strong\u003e 200 W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier technology:\u003c\/strong\u003e MOON MDCA, Class A\/B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e MOON Hybrid Power (MHP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND 2 – Roon Ready, AirPlay, Tidal Connect, Qobuz Connect, Spotify Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono stage:\u003c\/strong\u003e built-in, MM and MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 2× coaxial, 1× optical, 1× USB, 1× HDMI ARC (TV sound)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e RCA, balanced (XLR), phono MM\/MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e colour display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 5 Hz – 100 kHz (+0 \/ −3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 42.9 × 8.7 × 38.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Canada (Simaudio)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 371, CRM-4 metal remote control, power cable, MOONLink cable, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's built into the MOON 371?\u003c\/strong\u003e\u003cbr\u003eFive functions in one chassis: integrated amplifier, MiND 2 streamer, DAC, preamplifier and MM\/MC phono stage. You only need to connect speakers and sources – a complete system without an equipment tower.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect a turntable and a TV?\u003c\/strong\u003e\u003cbr\u003eYes. The built-in phono stage accepts MM and MC cartridges, and via HDMI ARC you integrate the TV and hear the TV sound through your hi-fi speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the MOON 371 Roon Ready?\u003c\/strong\u003e\u003cbr\u003eYes. Via the MiND 2 platform it is Roon Ready and additionally supports Tidal Connect, Qobuz Connect, Spotify Connect and AirPlay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 371 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause an all-in-one only convinces when the speakers and setup fit. We tune the 371 to your room, set up streaming, turntable and TV, and as an authorised MOON dealer in Wädenswil we're here for warranty and service – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e, a turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and the connection between them under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. The full brand range is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989541122384,"sku":"MOON-371-BLACK","price":5980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-371-netzwerk-vollverstaerker-schwarz-frontansicht.png?v=1786531808"},{"product_id":"moon371sibl","title":"MOON 371 Network Integrated Amplifier, Silver\/Black","description":"\u003cp\u003eThe MOON 371 is a network integrated amplifier from Simaudio that combines amplifier, MiND 2 streamer, DAC, preamplifier and MM\/MC phono stage in one chassis, delivering 100 watts per channel into 8 ohms.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 371?\u003c\/h2\u003e\n\u003cp\u003eBecause it bundles five devices into one chassis – integrated amplifier, streamer, DAC, preamplifier and phono stage – making the equipment tower obsolete. At its core works MDCA technology (MOON Distortion-Cancelling Amplifier), derived from the reference class, which significantly reduces distortion, combined with the hybrid MHP power supply. Into 4 ohms it delivers 200 watts, so it drives more demanding speakers with confidence too. Via the MiND 2 platform you stream from Qobuz, Tidal or Spotify, with Roon Ready and AirPlay included – and the HDMI ARC input brings TV sound cleanly into the system.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA clear, dynamic and calm sound with the typical MOON transparency – whether streamed, played from CD or from vinyl. Voices and instruments are cleanly layered in the room, the bass stays controlled even at higher levels. Thanks to the built-in MM\/MC phono stage, the turntable plays on the same level as the digital sources.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the 371 for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants a complete high-end system in one device – with streaming, turntable connection and TV integration, but without a cable jungle and stack of components.\u003c\/p\u003e\n\u003cp\u003eHonest take: if you deliberately build your system from separate components and want to swap out each stage individually, a separated pre-\/power-amp setup gives you more freedom. And for very large, extremely power-hungry speakers in big rooms, a more powerful power amp may be in order.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA well thought-out all-in-one that replaces almost an entire system without compromising on sound – including phono and HDMI ARC, which is by no means a given in this device class. With its silver side panels, it adds a bright accent in the rack. We at HD Zürisee in Wädenswil will tell you honestly whether the 371 suits your speakers and your room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e Reference class and 5.0 out of 5 stars, awarded \"Highend-Tipp\" – hifitest 2\/2026.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e network integrated amplifier (all-in-one)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (8 Ω):\u003c\/strong\u003e 100 W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (4 Ω):\u003c\/strong\u003e 200 W per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier technology:\u003c\/strong\u003e MOON MDCA, Class A\/B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e MOON Hybrid Power (MHP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND 2 – Roon Ready, AirPlay, Tidal Connect, Qobuz Connect, Spotify Connect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono stage:\u003c\/strong\u003e built-in, MM and MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 2× coaxial, 1× optical, 1× USB, 1× HDMI ARC (TV sound)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e RCA, balanced (XLR), phono MM\/MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e colour display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 5 Hz – 100 kHz (+0 \/ −3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 42.9 × 8.7 × 38.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Canada (Simaudio)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver\/Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 371, CRM-4 metal remote control, power cable, MOONLink cable, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's built into the MOON 371?\u003c\/strong\u003e\u003cbr\u003eFive functions in one chassis: integrated amplifier, MiND 2 streamer, DAC, preamplifier and MM\/MC phono stage. You only need to connect speakers and sources – a complete system without an equipment tower.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect a turntable and a TV?\u003c\/strong\u003e\u003cbr\u003eYes. The built-in phono stage accepts MM and MC cartridges, and via HDMI ARC you integrate the TV and hear the TV sound through your hi-fi speakers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the MOON 371 Roon Ready?\u003c\/strong\u003e\u003cbr\u003eYes. Via the MiND 2 platform it is Roon Ready and additionally supports Tidal Connect, Qobuz Connect, Spotify Connect and AirPlay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 371 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause an all-in-one only convinces when the speakers and setup fit. We tune the 371 to your room, set up streaming, turntable and TV, and as an authorised MOON dealer in Wädenswil we're here for warranty and service – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e, a turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and the connection between them under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. The full brand range is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989541155152,"sku":"MOON-371-SILVER","price":5980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-371-netzwerk-vollverstaerker-silber-schwarz-frontansicht.png?v=1786531808"},{"product_id":"moon791northcollection","title":"MOON 791 Streaming Preamplifier North Collection","description":"\u003cp\u003eThe MOON 791 is a streaming preamplifier from the North Collection that combines a network player, DAC, MM\/MC phono stage and a fully analogue preamplifier in one chassis.\u003c\/p\u003e\n\u003cp\u003eIn short: four devices in one – a single power cable instead of cable clutter behind the sideboard, yet no compromises in any of the individual stages.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 791?\u003c\/h2\u003e\n\u003cp\u003eBecause it's the control centre of your system without complicating it. The MDE-2 DAC module with reclocking FPGA processes high-resolution PCM and DSD, the MiND2 platform brings streaming directly into the device, and the third generation of the M-VOL3 volume control works purely in the analogue domain – without losing resolution at low levels. The digital and analogue sections are galvanically isolated and built as dual-mono, so they stay out of each other's way.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eStudio-quality streaming via Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect, AirPlay 2 and Bluetooth – and entirely without a mandatory subscription, since the 791 also plays internet radio, local network files and USB storage. For vinyl, a fully configurable MM\/MC phono stage is built in that owes little to external preamps. Via HDMI with ARC you integrate the TV, and the 4.3-inch colour display always shows you what's playing.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MOON 791 for? (and who is it not for – honest take)\u003c\/h3\u003e\n\u003cp\u003eIdeal if you want to bring streaming and vinyl together under one roof and have had enough of a rack full of separate boxes. Paired with the MOON 761 power amp, it becomes an uncompromising North Collection chain.\u003c\/p\u003e\n\u003cp\u003eHonest take: if you exclusively stream Spotify over Bluetooth in the background, you're buying a concert grand piano for \"Happy Birthday\" – it works, but you'll never tap into the 791's full potential. Leaner streaming solutions exist for that. And active speakers with their own power amp don't need it either.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA preamplifier that simultaneously replaces half the system – without leaving anything on the table sonically. Anyone who wants to bring a digital and an analogue source together at the highest level finds the right brain for it in the 791.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e StereoNET Applause Award for the North combination 791 + 761 – \"MOON's new 791 is truly a North star…\" (StereoNET, 2023).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice type:\u003c\/strong\u003e network player, DAC, MM\/MC phono stage \u0026amp; analogue preamplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC:\u003c\/strong\u003e MDE-2 with reclocking FPGA, PCM up to 384 kHz, DSD256\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND2 – Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect, AirPlay 2, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 7 (incl. 1× HDMI with ARC, USB audio, optical, coaxial)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× line, 1× phono (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e RCA \u0026amp; XLR, variable or fixed configurable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono gain:\u003c\/strong\u003e 40 \/ 54 \/ 60 \/ 66 dB (configurable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume control:\u003c\/strong\u003e M-VOL3 (fully analogue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e fully balanced, dual-mono, galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 4.3\" colour graphic display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 2 Hz – 200 kHz (+0 dB \/ –3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (preamplifier):\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion + noise:\u003c\/strong\u003e 0.0004 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration:\u003c\/strong\u003e MOONLink, BRM-1 remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 10.2 × 44.9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e MOON 791, BRM-1 remote control, power cable, Wi-Fi antenna, manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can the MOON 791 do?\u003c\/strong\u003e\u003cbr\u003eThe 791 combines four components: a network streamer, a high-resolution DAC, an MM\/MC phono stage for the turntable and a fully analogue preamplifier. Behind it you only need a power amp and speakers – sources such as streaming, vinyl, computer or TV are already covered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich streaming services does the MOON 791 support?\u003c\/strong\u003e\u003cbr\u003eVia the MiND2 platform you get Roon, TIDAL Connect, Qobuz Connect, Spotify Connect, AirPlay 2 and Bluetooth. Even without a paid subscription, it plays internet radio as well as music files from network storage or USB – the subscription is an option, not a requirement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MOON 791 have a phono stage for the turntable?\u003c\/strong\u003e\u003cbr\u003eYes, a fully configurable phono stage for MM and MC cartridges is built in. Gain, loading and capacitance can be set in the menu, so you can run different cartridges optimally without an external preamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a power amp for the MOON 791?\u003c\/strong\u003e\u003cbr\u003eYes. The 791 is a preamplifier and doesn't deliver speaker power itself. The MOON 761 is a perfect match for driving the speakers; in principle any power amp with RCA or XLR input will work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 791 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause a device of this class lives on good advice: we set up streaming, network and phono stage with you, tune it to your speakers, and as an authorised dealer we're here for you with five years' warranty and our own technician – personally, even after the purchase.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right power amp under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower Amplifiers\u003c\/a\u003e, speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e and high-quality connections under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. More from the series is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989541613904,"sku":null,"price":16980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-791-streaming-vorverstaerker-north-collection-frontansicht.png?v=1786531808"},{"product_id":"moon891northcollection","title":"MOON 891 Streaming Preamplifier North Collection","description":"\u003cp\u003eThe MOON 891 is the streaming preamplifier and flagship of the North Collection – network player, reference DAC, MM\/MC phono stage and fully analogue preamplifier in one chassis.\u003c\/p\u003e\n\u003cp\u003eWhere the smaller 791 already leaves little to be desired, the 891 closes the last gaps – for anyone who has struck the word “compromise” from their vocabulary.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON 891?\u003c\/h2\u003e\n\u003cp\u003eBecause MOON's entire know-how sits in one chassis here. The MDE-3 Digital Engine is reserved exclusively for the 891: two ESS ES9038PRO converters in a dual-mono layout, clocked by a femtosecond clock that clears jitter out of the digital signal. The analogue section works with the precise M-RAY2 volume control, and the MOON Damping Base (MDB) mechanically decouples the internals from the outside world. Digital and analogue are consistently built as separate sections – two devices in one chassis.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA single control centre for all your music: streaming via the MiND2 platform with Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect and AirPlay 2 – and without a mandatory subscription, because internet radio, local files and USB play just as well on the 891. Add a fully configurable MM\/MC phono stage for vinyl, HDMI with ARC for the TV, and a 5-inch colour display that's actually a pleasure to use day to day. The DAC decodes virtually every current format – from high-resolution PCM through DSD to MQA.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MOON 891 for? (and who it isn't – straight talk)\u003c\/h3\u003e\n\u003cp\u003eFor the uncompromising front end of a high-end chain, ideally paired with the MOON 861. If your speakers and room are up to the level, the 891 extracts the last few percent that others leave on the table.\u003c\/p\u003e\n\u003cp\u003eStraight talk: if the 791 already covers your sources fully, the step up to the 891 is a question of the very last refinements – worthwhile only once the rest of your system plays at the same level. Honestly, on middling speakers a good deal of what makes the 891 special simply evaporates.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe “last preamplifier” for a serious, high-resolution system: streamer, DAC, phono and analogue preamplifier at reference level, in one chassis that makes almost everything else in the rack redundant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the specialist press says:\u003c\/strong\u003e StereoNET Applause Award for the North combination 891 + 861 – “The 891 and 861 sit atop MOON’s prestigious North Collection with good reason…” (StereoNET, 2024).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice type:\u003c\/strong\u003e Network player, DAC, analogue preamplifier \u0026 MM\/MC phono stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC:\u003c\/strong\u003e MDE-3 Digital Engine, 2× ESS ES9038PRO (dual-mono), femtosecond clock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. resolution:\u003c\/strong\u003e PCM 32-bit \/ 384 kHz, DSD256 (native), MQA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e MiND2 – Roon Ready, TIDAL Connect, Qobuz Connect, Spotify Connect, AirPlay 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 6 (incl. USB audio, coaxial, optical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× line, 1× phono (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 1× HDMI with ARC, MOONLink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhono gain:\u003c\/strong\u003e 40 \/ 54 \/ 60 \/ 66 dB (configurable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume control:\u003c\/strong\u003e M-RAY2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (preamp):\u003c\/strong\u003e 125 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion + noise:\u003c\/strong\u003e 0.0003 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 2 Hz – 200 kHz (+0 dB \/ –3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 5\" colour graphic display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanics:\u003c\/strong\u003e MOON Damping Base (MDB) for vibration decoupling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 48.1 × 14 × 44.9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty (MOON Switzerland):\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in delivery:\u003c\/strong\u003e MOON 891, BRM-1 remote control (Bluetooth), power cable, MOONLink cable, 2× Wi-Fi antenna, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the MOON 891 and 791?\u003c\/strong\u003e\u003cbr\u003eThe 891 is the flagship and uses the exclusive MDE-3 Digital Engine with two ESS ES9038PRO converters, M-RAY2 volume control and the MOON Damping Base. That results in higher resolution and a lower noise floor. Both devices share the same feature set and the MiND2 streaming platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat resolution does the MOON 891 handle?\u003c\/strong\u003e\u003cbr\u003eThe DAC processes PCM up to 32-bit \/ 384 kHz as well as native DSD256, and additionally decodes MQA. That means it plays virtually every currently available digital format in full quality – from streaming sources to local studio master files.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a paid subscription for the MOON 891?\u003c\/strong\u003e\u003cbr\u003eNo. MiND2 runs services like TIDAL, Qobuz, Spotify and Roon, but just as well internet radio, files from network storage, USB, or your turntable via the phono stage. A streaming subscription is an option, not a requirement for full listening enjoyment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MOON 891 have a phono stage?\u003c\/strong\u003e\u003cbr\u003eYes, a fully configurable phono stage for MM and MC cartridges is built in. Gain and loading can be adjusted in the menu, so even demanding cartridges reach their full potential without an external preamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON 891 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause a reference component only truly shines in the right environment. We listen to your system, tune streaming, phono and the combination with power amp and speakers, and accompany you as an authorised dealer with five years of warranty and our own technician – well beyond the purchase.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind the matching power amplifier under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e, reference-class speakers under \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e and high-quality connections under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e. More from the series is shown in the \u003ca href=\"\/en\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989541679440,"sku":null,"price":25980.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-891-streaming-vorverstaerker-north-collection-frontansicht.png?v=1786531860"},{"product_id":"regaaosmc","title":"Rega AOS MC Phono Preamplifier","description":"\u003cp\u003eThe Rega AOS MC is a dedicated high-end phono stage for moving-coil cartridges, bringing technology from Rega's reference model Aura into a compact, fully adjustable chassis. Not an all-rounder, but an MC specialist – built to extract the very last bit from your cartridge.\u003c\/p\u003e\n\u003ch2\u003eWhy the AOS MC?\u003c\/h2\u003e\n\u003cp\u003eBecause it makes reference-level technology affordable. The circuit is based on the flagship Aura, runs purely analogue in Class A, and deliberately avoids digital control circuitry in the signal path. Low-noise FET inputs and a solid aluminium chassis that shields the delicate MC signals from interference keep the signal path clean and uncoloured. Four resistance and two capacitance settings let you match it exactly to your cartridge.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eRealism and calm. A properly set-up MC cartridge sounds open, dynamic and free of coloration through the AOS – the soundstage grows large, fine details emerge without harshness. Matched correctly for load and capacitance, your system plays exactly as the manufacturer intended. That's high-end that adds nothing and takes nothing away.\u003c\/p\u003e\n\u003ch3\u003eWho is the AOS MC for? (and who it isn't – straight talk)\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners with a good MC cartridge who want an uncompromising, purely analogue phono stage. Straight talk: it does nothing for MM cartridges – it's a pure MC specialist. If you expect a remote control or a display, this isn't for you either. And it wants to be set up properly: we match load and capacitance exactly to your system before you buy.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe AOS MC is the clever way to get Aura genes for a fraction of the price – a purist that does exactly one thing, but at reference level. At HD Zürisee in Wädenswil we set it up to match your cartridge, so it shows its potential from the very start.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: MC phono preamplifier, purely analogue (Class A)\u003c\/li\u003e\n\u003cli\u003eInput resistance: 70, 100, 150 \u0026amp; 400 ohms (switchable)\u003c\/li\u003e\n\u003cli\u003eInput capacitance: 1000 \u0026amp; 4300 pF (switchable)\u003c\/li\u003e\n\u003cli\u003eGain: 69.3 dB or 63.5 dB (switchable)\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: better than ±0.2 dB (65 Hz – 70 kHz)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 17.5 Hz (−3 dB) to 100 kHz (−0.2 dB)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): 0.03 %\u003c\/li\u003e\n\u003cli\u003ePower consumption: 20 W (0.4 W standby, can be disabled)\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 220 × 80 × 330 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.9 kg\u003c\/li\u003e\n\u003cli\u003eIncluded: Rega AOS MC, power cable, quick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the AOS MC only work with Rega cartridges?\u003c\/h3\u003e\n\u003cp\u003eNo. Out of the box it's tuned ideally for Rega MC cartridges like the Ania or Apheta, but thanks to four resistance and two capacitance settings it suits almost any moving-coil cartridge. Bring us your cartridge's specs and we'll set up the matching for you.\u003c\/p\u003e\n\u003ch3\u003eDoes the AOS MC also work with MM cartridges?\u003c\/h3\u003e\n\u003cp\u003eNo. The AOS MC is a pure MC specialist, designed for the tiny signals of moving-coil cartridges. For an MM cartridge you need an MM phono stage like the Rega Fono MM – we'll show you what suits your cartridge.\u003c\/p\u003e\n\u003ch3\u003eDoes the AOS MC always need to stay switched on?\u003c\/h3\u003e\n\u003cp\u003eNo. An automatic standby function puts the unit to sleep when there's no signal. If you prefer it to stay permanently at operating temperature, you can disable this via a switch on the rear panel. Either way works, depending on your preference.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Rega AOS MC at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an MC phono stage is only as good as its setup. We match load and capacitance exactly to your cartridge, advise you on the whole chain, and handle the warranty properly as an authorised dealer. In person, on Lake Zurich in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe AOS MC shows its strengths with a high-quality \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eMC cartridge\u003c\/a\u003e and a matching \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e. Find more from the analogue range among the \u003ca href=\"\/en\/collections\/rega\"\u003eRega components\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":52989555605840,"sku":null,"price":1699.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-aos-mc-phono-vorverstaerker-frontansicht.jpg?v=1786623418"},{"product_id":"regaauramc","title":"Rega Aura Reference MC Phono Stage, Black","description":"\u003cp\u003eThe Rega Aura Reference MC is a fully balanced Class-A phono preamplifier exclusively for moving-coil cartridges, amplifying the finest groove detail against a truly black background. It's Rega's reference statement for MC amplification.\u003c\/p\u003e\u003cp\u003eOver 13 kilograms of aluminium, hand-selected individual transistors, five impedance and four capacitance settings on the front panel – the Aura is built to get out of the cartridge's way.\u003c\/p\u003e\u003ch2\u003eWhy the Aura?\u003c\/h2\u003e\u003cp\u003eBecause it's extremely quiet yet remains flexible. The fully balanced Class-A design processes the signal without the typical crossover distortion, noise drops to a physical minimum – music appears against a truly black background. Using the solid front-panel controls, you match impedance and capacitance to your MC cartridge exactly, in seconds. Passive RIAA equalisation keeps the tonal balance without disturbing the musical flow.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eA composure with which even the quietest impulses emerge from the groove floor. The Aura places large symphonic works in the room effortlessly and without compression; voices and instruments stand tangible and clear. Honestly: it's incorruptible – a harsh-sounding or badly matched cartridge isn't masked, it's exposed.\u003c\/p\u003e\u003ch3\u003eWho is the Aura for?\u003c\/h3\u003e\u003cp\u003eFor vinyl listeners with a high-quality MC cartridge who no longer accept any bottleneck in phono amplification – the natural partner for a turntable like the Rega Planar 10. Straight talk: it's a pure MC stage. If you use an MM cartridge, you won't find a matching input here and are better served with an MM phono stage.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Aura Reference MC is the sonic end point for MC vinyl – uncompromising, honest, built to last for decades. In an equally capable chain, it shows what analogue technology can achieve today. At HD Zürisee in Wädenswil, we tune turntable, cartridge and Aura together as a unit, so nothing becomes the bottleneck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the trade press says:\u003c\/strong\u003e “… sounds significantly more coherent and has altogether superior dynamic expression.” – \u003cem\u003ehi-fi+\u003c\/em\u003e, 2019.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: MC phono preamplifier, fully balanced, Class A\u003c\/li\u003e\n\u003cli\u003eGain: 63.5 dB or 69.5 dB (selectable)\u003c\/li\u003e\n\u003cli\u003eInput impedance: 70 \/ 100 \/ 150 \/ 300 \/ 400 Ω\u003c\/li\u003e\n\u003cli\u003eCapacitance: 1000 \/ 2000 \/ 3200 \/ 4300 pF\u003c\/li\u003e\n\u003cli\u003eOutputs: balanced (XLR) and unbalanced (RCA)\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: 0.2 dB (100 Hz – 50 kHz)\u003c\/li\u003e\n\u003cli\u003ePower consumption: 15.3 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 435 × 88 × 350 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 13.4 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years\u003c\/li\u003e\n\u003cli\u003eIncluded: Aura Reference MC, power cable, manual\/test certificate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eCan I use the Aura with cartridges from other brands?\u003c\/h3\u003e\u003cp\u003eYes. With five impedance steps (70 to 400 Ω) and selectable capacitance, the Aura suits practically any high-quality low-output MC cartridge – whether from Rega, Ortofon or another manufacturer. We'll help you find the right settings for your cartridge.\u003c\/p\u003e\u003ch3\u003eWhy MC only, with no MM input?\u003c\/h3\u003e\u003cp\u003eThe Aura is consistently designed as a pure MC reference stage and sonically optimised for that. There's no matching input for moving-magnet cartridges; a dedicated MM stage like the Rega Fono MM is the right choice there. Together, the two cover every cartridge type.\u003c\/p\u003e\u003ch3\u003eDoes the Aura need to stay switched on permanently?\u003c\/h3\u003e\u003cp\u003eFor the best sound, Rega recommends leaving it switched on, or powering it up around an hour before listening, so the Class-A circuit is thermally stable. Since it gives off heat in Class-A operation, it should have a few centimetres of clearance above it in the rack.\u003c\/p\u003e\u003ch3\u003eWhy buy the Rega Aura at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a reference phono stage is only as good as its setup. We fit and align your MC cartridge properly and tune turntable, cartridge and Aura to each other. Fine adjustment and service are done in person by our technician Mauri in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe Aura belongs with an equally capable \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e fitted with a high-quality MC \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e, plus a matching \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e and good \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e. Find more phono options among the \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e, and the whole Rega range in the \u003ca href=\"\/en\/collections\/rega\"\u003ebrand overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":52989555638608,"sku":null,"price":5499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-aura-reference-mc-phonostufe-frontansicht.jpg?v=1786623656"},{"product_id":"regafonomc","title":"Rega Fono MC MK4","description":"\u003cp\u003eThe Rega Fono MC MK4 is a dedicated phono preamplifier for moving-coil cartridges, raising the extremely quiet MC signal to line level with very low noise.\u003c\/p\u003e\u003cp\u003eIf you're running an MC cartridge, there's no getting around a device like this – and the MK4 handles the job with a calm and precision rarely found at this price point.\u003c\/p\u003e\u003ch2\u003eWhy the Fono MC MK4?\u003c\/h2\u003e\u003cp\u003eSmall DIP switches on the rear let you set input resistance (70, 100, 150 or 400 ohms) and capacitance (1000 or 4300 picofarads) exactly to match your system – so you extract the last bit of resolution. The input stage uses particularly low-noise LSK389 transistors, and the anodised aluminium chassis shields the sensitive electronics from interference. The result is a truly black background against which the finest details unfold.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eThe MK4 behaves like a good interpreter: it adds nothing and leaves nothing out. Voices and instruments are cleanly layered in space, dynamics feel effortless, and even quiet passages don't sink into background noise. It's an especially perfect match for Rega cartridges like the Ania or Ania Pro – these components are practically built for each other.\u003c\/p\u003e\u003ch3\u003eWho is the Fono MC MK4 for?\u003c\/h3\u003e\u003cp\u003eIdeal for anyone using a moving-coil cartridge who wants to hear its finer nuances without compromise. Straight talk: it does MC only. If you're running a classic MM (moving-magnet) cartridge, the Fono MM MK5 is the right choice – the MC input would simply overload the MM signal. A tip from the workshop: don't place the external power supply directly next to the tonearm cable, to avoid hum interference.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor getting started in the moving-coil world, the Fono MC MK4 is our top recommendation here in Wädenswil: uncomplicated, highly precise and hard to beat on price. If you like, we can work out together at HD Zürisee whether MC is the right path for your system – or whether your budget is better spent elsewhere.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for moving-coil (MC) cartridges\u003c\/li\u003e\n\u003cli\u003eInput resistance: 70, 100, 150 or 400 ohms (selectable via DIP switch)\u003c\/li\u003e\n\u003cli\u003eInput capacitance: 1000 or 4300 picofarads (selectable)\u003c\/li\u003e\n\u003cli\u003eGain: 63.5 or 69.5 decibels at 1 kilohertz (selectable)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 200 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 13 hertz to 100 kilohertz\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: better than ±0.2 decibels (100 hertz to 100 kilohertz)\u003c\/li\u003e\n\u003cli\u003ePower supply: external 24-volt AC power supply (max. 150 milliamps)\u003c\/li\u003e\n\u003cli\u003eChassis: anodised aluminium\u003c\/li\u003e\n\u003cli\u003eDimensions: 180 × 45 × 150 mm (W × H × D)\u003c\/li\u003e\n\u003cli\u003eIncluded: Fono MC MK4, external 24-volt power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDoes the Fono MC MK4 also suit MC cartridges from other brands?\u003c\/strong\u003e\u003cbr\u003eYes. Thanks to selectable resistance (70 to 400 ohms) and capacitance (1000 or 4300 picofarads), it works well with MC cartridges from Ortofon, Audio-Technica, Hana and many others. For Rega's own cartridges, like the Ania, it's naturally the obvious choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I set the DIP switches for a Rega Ania?\u003c\/strong\u003e\u003cbr\u003eFor Rega's MC cartridges we recommend 100 ohms resistance, 1000 picofarads capacitance and the high gain setting. This gives the MK4 its most linear performance. Fine-tuning is fine too: a higher resistance often makes the sound a bit brighter and faster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a separate ground wire?\u003c\/strong\u003e\u003cbr\u003eOnly if your turntable has one. In that case, it connects to the ground terminal on the rear. Rega turntables are usually earthed via the RCA cable, so you often don't need an extra wire at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the Fono MC MK4 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause years of experience tell us which cartridge suits which phono stage – and we tell you honestly when MC is worthwhile and when it isn't. Our technician Mauri sets up the settings to match your system. Call us, message us, or reach us on WhatsApp: +41 44 680 22 00.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the right foundation among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e. Everything related to the brand is in the \u003ca href=\"\/en\/collections\/rega\"\u003eRega collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":52989555802448,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-fono-mc-mk4-phono-vorverstaerker-schraegansicht.jpg?v=1786625270"},{"product_id":"regafonominia2dmk2","title":"Rega Fono Mini A2D","description":"\u003cp\u003eThe Rega Fono Mini A2D is a compact phono preamplifier for moving-magnet cartridges with a built-in USB output, letting you digitise your records on a computer.\u003c\/p\u003e\u003cp\u003eIt connects your turntable to any amplifier – and archives your vinyl treasures as a file too, if you like.\u003c\/p\u003e\u003ch2\u003eWhy the Fono Mini A2D?\u003c\/h2\u003e\u003cp\u003eThe circuit is based on the larger Fono MM, distilled to the essentials: genuine Rega genes in a small box. The MM gain stage cleanly raises your cartridge's quiet signal to line level, the extruded aluminium chassis shields against interference, and the USB output lets you record directly on a PC or Mac. A level control on the front lets you set recording levels cleanly.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eFor the price, there's a surprising amount of genuine Rega character in here: warm, punchy, pleasantly low-noise. No frills, just an honest workhorse that brings your turntable to life on any AUX input.\u003c\/p\u003e\u003ch3\u003eWho is the Fono Mini A2D for?\u003c\/h3\u003e\u003cp\u003eIdeal for beginners and anyone reviving an old turntable while digitising their collection on the side. Straight talk: if you expect the huge soundstage and fine resolution of a four-figure phono stage, you'll hit limits here – it's a solid all-rounder, not a miracle worker. And it's designed exclusively for MM cartridges; the gain isn't enough for MC cartridges. Workshop tip: when recording, only turn the level control up far enough that the loudest passages just avoid hitting the red.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Fono Mini A2D is our insider tip for an uncomplicated start into vinyl with a digitising function built in. At HD Zürisee in Wädenswil we'll show you how to make your first clean recording in just a few minutes – no expensive software needed.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for moving-magnet (MM) cartridges with USB analogue\/digital converter\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 5 millivolts for 500 millivolts output voltage\u003c\/li\u003e\n\u003cli\u003eInput impedance: 47 kilohms in parallel with 100 picofarads\u003c\/li\u003e\n\u003cli\u003eMaximum input level: 70 millivolts at 1 kilohertz\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 100 ohms\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 78 decibels (A-weighted)\u003c\/li\u003e\n\u003cli\u003eUSB output: 16-bit, 44.1 kilohertz (maximum 48 kilohertz)\u003c\/li\u003e\n\u003cli\u003ePower supply: external 24-volt AC power supply (85 milliamps)\u003c\/li\u003e\n\u003cli\u003eChassis: extruded aluminium\u003c\/li\u003e\n\u003cli\u003eDimensions: 102 × 30 × 125 mm (W × H × D)\u003c\/li\u003e\n\u003cli\u003eIncluded: Fono Mini A2D, external 24-volt power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I need a special driver for USB recording?\u003c\/strong\u003e\u003cbr\u003eNo. Windows and macOS recognise the Fono Mini A2D as a standard audio device. You can start right away with free programs like Audacity and record your records – with no additional software purchase needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cables do I need to connect it?\u003c\/strong\u003e\u003cbr\u003eFor the system, a standard RCA cable: turntable to the input, amplifier to the output. For recording you'll also need a USB cable to the computer, sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I leave the unit permanently connected to power?\u003c\/strong\u003e\u003cbr\u003eYes, it's designed for continuous operation and uses very little power at idle. Since it has no power switch of its own, we recommend a switchable power strip for longer breaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the Fono Mini A2D at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we show you not just the device, but the whole journey: from the correct connection to your first clean recording. Our team on Lake Zurich knows the pitfalls and is happy to help you in person. Call us, message us, or start a WhatsApp chat.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFind the right turntable in the \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e collection, and the right cartridge among the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e. More from Rega in the \u003ca href=\"\/en\/collections\/rega\"\u003eRega collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":52989555835216,"sku":null,"price":159.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-fono-mini-a2d-phono-vorverstaerker-rueckansicht.jpg?v=1786625442"},{"product_id":"regafonomm","title":"Rega Fono MM MK5","description":"\u003cp\u003eThe Rega Fono MM MK5 is a dedicated phono preamplifier for moving-magnet cartridges, precisely raising your turntable's weak signal to line level.\u003c\/p\u003e\u003cp\u003eIt's the logical partner for a Planar 2 or Planar 3, but works well with practically any high-quality MM cartridge – connect it, switch it on, enjoy.\u003c\/p\u003e\u003ch2\u003eWhy the Fono MM MK5?\u003c\/h2\u003e\u003cp\u003eInstead of a cheap standard chip, Rega uses a discrete input stage built from individual components. This lowers noise and noticeably opens up the soundstage. The RIAA equalisation works with extreme accuracy, so bass and treble sound the way they were cut into the vinyl. The aluminium chassis, in MK5 design, shields against interference and fits visually into the current Rega range.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eCompared with its predecessor, the biggest gain is in spaciousness – as if someone had cleaned the last streaks off the window. The bass is crisp and controlled, voices feel tangible, and that typically punchy Rega character is simply fun. That's something few phono stages built into an amplifier at this level can match.\u003c\/p\u003e\u003ch3\u003eWho is the Fono MM MK5 for?\u003c\/h3\u003e\u003cp\u003ePerfect for anyone with an MM cartridge like the Rega Nd3, Nd5, or an Ortofon 2M. Straight talk: it's a pure moving-magnet specialist. If you're planning to move to a moving-coil (MC) cartridge soon, go straight for the Fono MC MK4 – the MM's gain isn't enough for MC. Small workshop tip: place the external power supply as far as possible from the phono stage and turntable, to keep the background nice and quiet.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eWhen a customer here in Wädenswil asks how to most effectively upgrade their Planar 3, we almost always end up here. The Fono MM MK5 is honestly built, sounds well above its price, and is our reference recommendation for a clean MM chain. Tell us about your system and we'll tell you whether it's right for you.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: phono preamplifier for moving-magnet (MM) cartridges\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 1.7 millivolts for 200 millivolts output voltage\u003c\/li\u003e\n\u003cli\u003eInput impedance: 47 kilohms in parallel with 100 picofarads\u003c\/li\u003e\n\u003cli\u003eMaximum input level: 60 millivolts at 1 kilohertz\u003c\/li\u003e\n\u003cli\u003eGain: 41.4 decibels at 1 kilohertz\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 200 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 15 hertz to 100 kilohertz\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: better than ±0.2 decibels (100 hertz to 100 kilohertz)\u003c\/li\u003e\n\u003cli\u003ePower supply: external 24-volt AC power supply (max. 80 milliamps)\u003c\/li\u003e\n\u003cli\u003eDimensions: 180 × 45 × 150 mm (W × H × D)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.65 kg\u003c\/li\u003e\n\u003cli\u003eIncluded: Fono MM MK5, external 24-volt power supply, quick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhich input on my amplifier does the Fono MM MK5 connect to?\u003c\/strong\u003e\u003cbr\u003eA free line input (AUX, CD or Tuner). The turntable connects to the Fono MM, and from there to the amplifier. Never use your amplifier's own phono input – otherwise the signal is amplified twice and distorted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ground wire do I need?\u003c\/strong\u003e\u003cbr\u003eRega turntables are usually earthed via the RCA cable, so an extra wire is often not needed. If you use a turntable from another brand, connect its ground wire to the knurled screw on the rear to avoid hum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's different about the MK5 compared with its predecessor?\u003c\/strong\u003e\u003cbr\u003eMainly the new chassis, which visually matches the current Rega range, plus a further-refined choice of components in the output stage. This further lowers distortion and gives a silkier, less fatiguing playback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the Fono MM MK5 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we don't just sell you a box – we check whether cartridge, turntable and amplifier actually work together. Our experienced team on Lake Zurich advises you in person and sets up the chain properly. Reach us by phone, email or WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFind the right turntable among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, and the right cartridge among the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e. More from the brand in the \u003ca href=\"\/en\/collections\/rega\"\u003eRega collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Default Title","offer_id":52989555867984,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-fono-mm-mk5-phono-vorverstaerker-frontansicht.jpg?v=1786625623"},{"product_id":"thorensmm008","title":"Thorens MM 008 – Phono Preamp (MM\/MC)","description":"\u003cp\u003eThe Thorens MM 008 is a compact phono preamp for MM and MC cartridges. It brings your turntable's quiet signal up to line level — the simple answer for amplifiers without a phono input.\u003c\/p\u003e\n\u003cp\u003eSmall in size, serious in ambition: separate inputs for MM and MC, clean RIAA equalization and straightforward impedance matching make the MM 008 a flexible companion for entry-level and mid-range systems.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MM 008?\u003c\/h2\u003e\n\u003cp\u003eBecause it does exactly what it should, without any fuss — while staying flexible. Instead of fiddly DIP switches, you adjust the MC impedance using the included resistor plugs (10, 100, 1000 ohms); combined with the fixed 47 kOhm MM input, that covers virtually every common cartridge. Separate MM and MC sockets let you keep two systems connected in parallel, with no need to swap cables.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eClean, powerful phono sound from a robust metal housing. Thanks to its compact build, you can place it right next to the turntable and keep cable runs short — which benefits the quietness of the signal.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MM 008 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone looking for a flexible, good-sounding phono stage for MM or MC without jumping straight into high-end territory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHonestly:\u003c\/strong\u003e if you also want to digitize your records, go for the identical MM 008 ADC with USB instead. As a pure phono stage, the two sound identical.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe MM 008 is an honest, flexible phono stage with sensible impedance matching — a solid start into good vinyl sound. At HD Zürisee in Wädenswil, we'll show you the right setting for your cartridge.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Phono preamp MM\/MC (switchable)\u003c\/li\u003e\n\u003cli\u003eGain at 1 kHz: 40 dB (MM) \/ 60 dB (MC)\u003c\/li\u003e\n\u003cli\u003eInput impedance MM: 47 kOhm + 220 pF (fixed)\u003c\/li\u003e\n\u003cli\u003eInput impedance MC: 47 kOhm + 1 nF, adjustable via resistor plugs (10, 100, 1000 ohms)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity MM: 3.29 mV RMS at −10 dBV (316 mV RMS)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity MC: 0.325 mV RMS at −10 dBV (316 mV RMS)\u003c\/li\u003e\n\u003cli\u003eLinear frequency response: 20 Hz – 20 kHz (±0.3 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency response −3 dB: 10 Hz – 50 kHz\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: ±0.3 dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD+N): \u0026lt; 0.013% (MM) \/ \u0026lt; 0.055% (MC)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: \u0026gt; 86 dB (MM) \/ \u0026gt; 72 dB (MC)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: ≥ 40 dB\u003c\/li\u003e\n\u003cli\u003eMax. output voltage: 482 mV RMS at 5 mV RMS input (1 kHz)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 47 ohms\u003c\/li\u003e\n\u003cli\u003eOutput level: fixed, not adjustable\u003c\/li\u003e\n\u003cli\u003eHeadphone output: not available\u003c\/li\u003e\n\u003cli\u003eInputs: 3 RCA pairs (MM, MC, MC load) plus ground terminal\u003c\/li\u003e\n\u003cli\u003eOutputs: 1 RCA pair\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 24 V DC (external plug-in power supply)\u003c\/li\u003e\n\u003cli\u003ePower consumption: 3.4 W \/ 15 mA\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 150 × 50 × 117 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 504 g (without power supply)\u003c\/li\u003e\n\u003cli\u003eIncluded: phono stage, power supply, MC load adapter (10\/100\/1000 ohms)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich cartridges is the MM 008 suitable for?\u003c\/h3\u003e\n\u003cp\u003eFor MM and MC cartridges. MM runs at a fixed 47 kOhm; for MC, you adjust the impedance using the included resistor plugs (10, 100, 1000 ohms). That covers virtually every common cartridge.\u003c\/p\u003e\n\u003ch3\u003eCan I connect two cartridges at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes. The MM 008 has separate sockets for MM and MC, so you can keep two systems or two tonearms connected in parallel and switch between them with a button — no cable swapping needed.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference to the MM 008 ADC?\u003c\/h3\u003e\n\u003cp\u003eThe MM 008 ADC is identical in design but additionally offers an A\/D converter with USB output for digitizing your records. As a pure phono stage, both sound the same; if you don't need USB, the MM 008 is enough.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the MM 008 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the right impedance setting noticeably affects the sound of your cartridge — and we'll help you choose it together. Plus honest advice on your whole system, straight from Wädenswil.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, and the matching cartridge among the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e. More phono preamps are shown in the \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono Preamps\u003c\/a\u003e collection; the full Thorens range is available in the \u003ca href=\"\/en\/collections\/thorens\"\u003eThorens\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Thorens","offers":[{"title":"Default Title","offer_id":52989572972880,"sku":null,"price":300.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/thorens-mm-008-phono-vorverstaerker-frontansicht.jpg?v=1786786033"},{"product_id":"thorensmm008adc","title":"Thorens MM 008 ADC – Phono Preamp with USB","description":"\u003cp\u003eThe Thorens MM 008 ADC is a phono preamp for MM and MC cartridges with a built-in analog-to-digital converter — it amplifies your records and, if you like, digitizes them via USB at the same time. The practical solution for listening to vinyl and archiving it simultaneously.\u003c\/p\u003e\n\u003cp\u003eMany modern amplifiers no longer have a phono input. The MM 008 ADC closes that gap — and goes a step further by turning your treasures into high-resolution files as well.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MM 008 ADC?\u003c\/h2\u003e\n\u003cp\u003eBecause it combines two things in one small, robust metal housing. As a phono stage, it handles MM and MC cartridges with precise RIAA equalization; separate inputs for MM and MC save you from swapping cables. As a digitizer, a 24-bit delta-sigma converter (Tenor TE7022L) converts the signal and outputs it to your computer via USB 2.0 — recordings up to 24-bit \/ 96 kHz are possible, for example as FLAC. You adjust the MC impedance to match your cartridge using the included resistor plugs (10, 100, 1000 ohms).\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eClean, unfussy phono sound with plenty of punch — plus the freedom to get a favorite record onto your computer in just a few minutes. Thanks to its compact build, you can place it right next to the turntable and keep cable runs short.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MM 008 ADC for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone looking for a flexible entry- to mid-range phono stage who also wants to digitize their collection — for on the go, for backups, or for rare pressings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHonestly:\u003c\/strong\u003e if you never want to digitize, the identical MM 008 without ADC saves you a few francs. But if you ever need the feature, you'll be glad to have it on board. And yes: the system list in the Thorens datasheet still mentions Windows XP through 8 — it dates back to the product launch and is long outdated. What that means for your current computer is explained further down in the FAQ.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe MM 008 ADC is a clever dual-purpose component: a good phono stage for MM and MC plus USB digitization. At HD Zürisee in Wädenswil, we'll show you the right impedance setting and the recording software.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Phono preamp MM\/MC (switchable) with built-in A\/D converter\u003c\/li\u003e\n\u003cli\u003eGain at 1 kHz: 40 dB (MM) \/ 60 dB (MC)\u003c\/li\u003e\n\u003cli\u003eInput impedance MM: 47 kOhm + 220 pF (fixed)\u003c\/li\u003e\n\u003cli\u003eInput impedance MC: 47 kOhm + 1 nF, adjustable via resistor plugs (10, 100, 1000 ohms)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity MM: 3.29 mV RMS at −10 dBV (316 mV RMS)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity MC: 0.325 mV RMS at −10 dBV (316 mV RMS)\u003c\/li\u003e\n\u003cli\u003eLinear frequency response: 20 Hz – 20 kHz (±0.3 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency response −3 dB: 10 Hz – 50 kHz\u003c\/li\u003e\n\u003cli\u003eRIAA accuracy: ±0.3 dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD+N): \u0026lt; 0.013% (MM) \/ \u0026lt; 0.055% (MC)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: \u0026gt; 86 dB (MM) \/ \u0026gt; 72 dB (MC)\u003c\/li\u003e\n\u003cli\u003eCrosstalk: ≥ 40 dB\u003c\/li\u003e\n\u003cli\u003eMax. output voltage: 482 mV RMS at 5 mV RMS input (1 kHz)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 47 ohms\u003c\/li\u003e\n\u003cli\u003eOutput level: fixed, not adjustable\u003c\/li\u003e\n\u003cli\u003eHeadphone output: not available\u003c\/li\u003e\n\u003cli\u003eA\/D converter: Tenor TE7022L, 24-bit delta-sigma\u003c\/li\u003e\n\u003cli\u003eSample rates: 8 \/ 16 \/ 32 \/ 44.1 \/ 48 \/ 96 kHz\u003c\/li\u003e\n\u003cli\u003eUSB output: USB 2.0, backward-compatible with USB 1.1\u003c\/li\u003e\n\u003cli\u003eSupported systems (manufacturer's spec): Windows 8 \/ 7 \/ Vista \/ XP and Mac OS — as of product launch, see FAQ\u003c\/li\u003e\n\u003cli\u003eInputs: 3 RCA pairs (MM, MC, MC load) plus ground terminal\u003c\/li\u003e\n\u003cli\u003eOutputs: 1 analog RCA pair, 1 × USB\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 24 V DC (external plug-in power supply)\u003c\/li\u003e\n\u003cli\u003ePower consumption: 3.5 W \/ 15 mA\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 150 × 50 × 117 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 511 g (without power supply)\u003c\/li\u003e\n\u003cli\u003eIncluded: phono stage, power supply, MC load adapter (10\/100\/1000 ohms), USB cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I digitize my records with the MM 008 ADC?\u003c\/h3\u003e\n\u003cp\u003eYou connect the USB output to your computer and record using recording software. For full quality, Thorens recommends a program that supports 24-bit \/ 96 kHz and lossless formats like FLAC. Free software such as Audacity also works.\u003c\/p\u003e\n\u003ch3\u003eDoes the MM 008 ADC work with a current Windows or Mac computer?\u003c\/h3\u003e\n\u003cp\u003eThorens's datasheet lists Windows 8, 7, Vista and XP as well as Mac OS — that list dates back to the product launch and is outdated. The USB section works as a USB Audio Class device and therefore usually needs no driver. That's not a guarantee for your particular system, though: just ask us and we'll sort it out with you.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference to the MM 008 without ADC?\u003c\/h3\u003e\n\u003cp\u003eThe MM 008 ADC is identical in design but additionally has the A\/D converter and the USB output for digitizing. As a pure phono stage, both sound identical. If you don't need the digital function, the cheaper MM 008 is enough.\u003c\/p\u003e\n\u003ch3\u003eWhich cartridges is the MM 008 ADC suitable for?\u003c\/h3\u003e\n\u003cp\u003eFor MM and MC cartridges. MM runs at a fixed 47 kOhm; for MC, you adjust the impedance using the included resistor plugs (10, 100, 1000 ohms). That covers virtually every common cartridge.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the MM 008 ADC at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll show you the right impedance for your cartridge and help with your digitizing setup — from the software to the cabling. Personal advice and an experienced team, straight from Wädenswil.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the right turntable under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, and the matching cartridge among the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e. More phono preamps are shown in the \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ePhono Preamps\u003c\/a\u003e collection; the full Thorens range is available in the \u003ca href=\"\/en\/collections\/thorens\"\u003eThorens\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Thorens","offers":[{"title":"Default Title","offer_id":52989573005648,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/thorens-mm-008-adc-phono-vorstufe-frontansicht.jpg?v=1786786033"},{"product_id":"vincentpho200bl","title":"Vincent PHO-200 Phono Preamplifier Black","description":"\u003cp\u003eThe Vincent PHO-200 is a compact phono preamplifier for MM and MC cartridges that raises the tiny signal from your turntable to line level – so you can run your deck even on an amplifier without a phono input.\u003c\/p\u003e\u003cp\u003eIt's the entry point into Vincent's phono range: a cleanly built metal housing with an outboard plug-in power supply that keeps hum interference away from the sensitive amplifier circuit. No frills, but exactly what a turntable without its own preamp needs.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-200?\u003c\/h2\u003e\u003cp\u003eBecause a cartridge's signal is extremely quiet – a few millivolts – and needs to be substantially amplified and equalised to the RIAA curve before your amplifier can do anything with it. That's exactly what the PHO-200 does, and with less noise and more cleanliness than the often thinly specced phono stages built into many integrated amplifiers.\u003c\/p\u003e\u003cp\u003eA switch on the underside lets you toggle between MM (Moving Magnet) and MC (Moving Coil). This way the PHO-200 stays with you even if you switch cartridges at some point. The separate power supply keeps the interference-prone electronics right where they belong: far away from the transformer.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC in one:\u003c\/strong\u003e switchable, fits practically any common cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal power supply:\u003c\/strong\u003e the outboard plug-in power supply keeps hum and interference out of the audio section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean signal path:\u003c\/strong\u003e RIAA equalisation with a high signal-to-noise ratio for a quiet, clear playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact metal housing:\u003c\/strong\u003e small, unobtrusive, finds a place anywhere.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonest upgrade:\u003c\/strong\u003e audibly better than the built-in phono stage of many integrated amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-200 for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to connect a turntable to an amplifier without a phono input – or who wants to swap their amplifier's built-in phono stage for something better without spending a lot of money right away. A sensible first step into vinyl listening.\u003c\/p\u003e\u003cp\u003eHonestly: the PHO-200 is the entry point, not a reference device. It has fixed input values and no fine-tuning – if you want to precisely match your MC cartridge or digitise records, take a look at the PHO-500 or PHO-701 instead. But for a solid, uncomplicated entry point, the PHO-200 is exactly right.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-200 is an honest, well-built entry-level phono preamplifier: MM\/MC, external power supply, clean sound – at a fair price. The obvious choice for a first turntable or an amplifier without a phono input.\u003c\/p\u003e\u003cp\u003eWhich phono preamplifier suits your cartridge, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with external power supply (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 84 dB, MC above 71 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms, MC 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching:\u003c\/strong\u003e MM\/MC on the underside of the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 V DC, 200 mA (external power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 115 × 55 × 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-200, external power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I even need the PHO-200?\u003c\/strong\u003e\u003cbr\u003eIf your turntable doesn't have a built-in phono preamp and your amplifier has no phono input, then yes. The PHO-200 raises the quiet cartridge signal to line level and equalises it to RIAA – only then does the record sound right. It's also worthwhile as a replacement for a weak built-in phono stage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between MM and MC?\u003c\/strong\u003e\u003cbr\u003eThese are the two common cartridge types. Moving Magnet (MM) delivers a higher signal and is more widespread, Moving Coil (MC) a finer, very quiet signal. The PHO-200 handles both – you switch between them using the switch on the underside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the power supply in a separate plug-in housing?\u003c\/strong\u003e\u003cbr\u003eBecause the phono signal is tiny and sensitive. A transformer right next to the amplifier circuit would easily induce hum. Thanks to the outboard power supply, the audio section stays quiet – you hear the music, not the mains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it worth stepping up to the PHO-300, PHO-500 or PHO-701?\u003c\/strong\u003e\u003cbr\u003eThe PHO-300 brings a more elaborate, fully outboard power supply. The PHO-500 allows fine-tuning to the cartridge and can digitise records via USB. The PHO-701 additionally uses a tube for a warmer sound. For a pure entry point, the PHO-200 is enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-200 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause from experience we know which phono preamplifier suits which cartridge and which system. We help you with the right setting, tell you honestly whether the entry model is enough or the bigger one is worth it, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577691472,"sku":null,"price":140.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-200-phono-vorverstaerker-schwarz-frontansicht.png?v=1787061205"},{"product_id":"vincentpho200si","title":"Vincent PHO-200 Phono Preamplifier Silver","description":"\u003cp\u003eThe Vincent PHO-200 is a compact phono preamplifier for MM and MC cartridges that raises the tiny signal from your turntable to line level – so you can run your deck even on an amplifier without a phono input.\u003c\/p\u003e\u003cp\u003eIt's the entry point into Vincent's phono range: a cleanly built metal housing with an outboard plug-in power supply that keeps hum interference away from the sensitive amplifier circuit. No frills, but exactly what a turntable without its own preamp needs.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-200?\u003c\/h2\u003e\u003cp\u003eBecause a cartridge's signal is extremely quiet – a few millivolts – and needs to be substantially amplified and equalised to the RIAA curve before your amplifier can do anything with it. That's exactly what the PHO-200 does, and with less noise and more cleanliness than the often thinly specced phono stages built into many integrated amplifiers.\u003c\/p\u003e\u003cp\u003eA switch on the underside lets you toggle between MM (Moving Magnet) and MC (Moving Coil). This way the PHO-200 stays with you even if you switch cartridges at some point. The separate power supply keeps the interference-prone electronics right where they belong: far away from the transformer.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC in one:\u003c\/strong\u003e switchable, fits practically any common cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal power supply:\u003c\/strong\u003e the outboard plug-in power supply keeps hum and interference out of the audio section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean signal path:\u003c\/strong\u003e RIAA equalisation with a high signal-to-noise ratio for a quiet, clear playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact metal housing:\u003c\/strong\u003e small, unobtrusive, finds a place anywhere.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonest upgrade:\u003c\/strong\u003e audibly better than the built-in phono stage of many integrated amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-200 for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to connect a turntable to an amplifier without a phono input – or who wants to swap their amplifier's built-in phono stage for something better without spending a lot of money right away. A sensible first step into vinyl listening.\u003c\/p\u003e\u003cp\u003eHonestly: the PHO-200 is the entry point, not a reference device. It has fixed input values and no fine-tuning – if you want to precisely match your MC cartridge or digitise records, take a look at the PHO-500 or PHO-701 instead. But for a solid, uncomplicated entry point, the PHO-200 is exactly right.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-200 is an honest, well-built entry-level phono preamplifier: MM\/MC, external power supply, clean sound – at a fair price. The obvious choice for a first turntable or an amplifier without a phono input.\u003c\/p\u003e\u003cp\u003eWhich phono preamplifier suits your cartridge, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with external power supply (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 84 dB, MC above 71 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms, MC 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching:\u003c\/strong\u003e MM\/MC on the underside of the unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 V DC, 200 mA (external power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 115 × 55 × 130 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-200, external power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo I even need the PHO-200?\u003c\/strong\u003e\u003cbr\u003eIf your turntable doesn't have a built-in phono preamp and your amplifier has no phono input, then yes. The PHO-200 raises the quiet cartridge signal to line level and equalises it to RIAA – only then does the record sound right. It's also worthwhile as a replacement for a weak built-in phono stage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference between MM and MC?\u003c\/strong\u003e\u003cbr\u003eThese are the two common cartridge types. Moving Magnet (MM) delivers a higher signal and is more widespread, Moving Coil (MC) a finer, very quiet signal. The PHO-200 handles both – you switch between them using the switch on the underside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the power supply in a separate plug-in housing?\u003c\/strong\u003e\u003cbr\u003eBecause the phono signal is tiny and sensitive. A transformer right next to the amplifier circuit would easily induce hum. Thanks to the outboard power supply, the audio section stays quiet – you hear the music, not the mains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is it worth stepping up to the PHO-300, PHO-500 or PHO-701?\u003c\/strong\u003e\u003cbr\u003eThe PHO-300 brings a more elaborate, fully outboard power supply. The PHO-500 allows fine-tuning to the cartridge and can digitise records via USB. The PHO-701 additionally uses a tube for a warmer sound. For a pure entry point, the PHO-200 is enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-200 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause from experience we know which phono preamplifier suits which cartridge and which system. We help you with the right setting, tell you honestly whether the entry model is enough or the bigger one is worth it, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577724240,"sku":null,"price":140.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-200-phono-vorverstaerker-silber-frontansicht.png?v=1787061291"},{"product_id":"vincentpho300bl","title":"Vincent PHO-300 Phono Preamplifier Black","description":"\u003cp\u003eThe Vincent PHO-300 is a phono preamplifier for MM and MC cartridges with a fully outboard power supply in its own second housing – for a particularly low-noise, clean playback of your turntable at a standard line input.\u003c\/p\u003e\u003cp\u003eIt's the step up from the PHO-200: instead of a plug-in power supply, the PHO-300 gets an elaborate power supply in a separate aluminium housing, connected via a DC cable. This keeps the sensitive amplifier circuit completely decoupled from mains interference.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-300?\u003c\/h2\u003e\u003cp\u003eBecause with a phono preamplifier, the power supply has a real say in the sound. The cartridge signal is tiny and gets heavily amplified – any interference from the power supply would be audible. The PHO-300 solves this thoroughly: power supply and audio section sit in separate housings, cleanly connected via a 5-pin DIN cable.\u003c\/p\u003e\u003cp\u003eSwitchable between MM (Moving Magnet) and MC (Moving Coil), it suits a wide range of cartridges. Both housings are made of high-quality aluminium and fit neatly into the powerLine design. The result is a deep, quiet background from which the music emerges.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own aluminium housing, connected via DIN cable – maximum quiet for the audio section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC switchable:\u003c\/strong\u003e fits Moving Magnet and Moving Coil cartridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-noise circuit:\u003c\/strong\u003e selected components and a high signal-to-noise ratio for clear playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-housing concept:\u003c\/strong\u003e compact aluminium housings in a clean powerLine design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoticeable upgrade:\u003c\/strong\u003e more dynamics and fine resolution than a built-in phono stage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-300 for?\u003c\/h3\u003e\u003cp\u003eFor anyone who takes their turntable seriously and wants more than a simple preamp – but doesn't (yet) need fine-tuning or digitisation. The fully outboard power supply is what brings the audible gain over the PHO-200 here.\u003c\/p\u003e\u003cp\u003eHonestly: the PHO-300 has fixed input values – capacitance is fixed at 300 pF, MC impedance at 100 ohms. If you want to precisely match your MC cartridge or digitise records on your computer, the PHO-500 is the right choice. But for clean, low-noise vinyl enjoyment without any fiddling, the PHO-300 is ideal.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-300 brings the fully outboard power supply into an affordable class: low-noise, cleanly built, MM\/MC-capable. An honest upgrade for anyone who wants to give their turntable a quiet foundation. \u003ca href=\"https:\/\/www.i-fidelity.net\/testberichte\/hifi\/vincent-pho-300\/test.html\" target=\"_blank\" rel=\"noopener\"\u003ei-fidelity.net\u003c\/a\u003e took a closer listen to the PHO-300 in a review.\u003c\/p\u003e\u003cp\u003eWhich phono preamplifier suits your cartridge, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with outboard power supply (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 83 dB, MC above 70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms, MC 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 300 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA, 1 × 5-pin DIN (DC input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, 1 × 5-pin DIN (power supply DC output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 10 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 112 × 60 × 126 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 kg (audio unit), 0.9 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-300 audio unit, PHO-300ps power supply, DIN connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the outboard power supply bring compared to the PHO-200?\u003c\/strong\u003e\u003cbr\u003eThe PHO-200 uses a small plug-in power supply, the PHO-300 an elaborate power supply in its own aluminium housing. This complete separation keeps mains interference even more consistently away from the amplifier circuit – the background becomes quieter, the playback more stable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cartridges is the PHO-300 suited for?\u003c\/strong\u003e\u003cbr\u003eFor Moving Magnet (MM) and Moving Coil (MC) systems. You switch between the two. The input values are fixed (47 kOhms for MM, 100 ohms for MC, 300 pF capacitance) and suit most common cartridges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the MC impedance on the PHO-300?\u003c\/strong\u003e\u003cbr\u003eNo, the values are fixed. If you want to specifically tune your MC cartridge to different impedances, you need the PHO-500 or PHO-701 with their DIP switches. For standard applications, the fixed design of the PHO-300 is entirely sufficient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I connect the PHO-300?\u003c\/strong\u003e\u003cbr\u003eThe turntable connects via RCA to the audio unit, the ground cable to the ground terminal. You connect the audio unit and power supply via the supplied DIN cable. From the audio unit you run RCA to a high-level input on your amplifier (e.g. AUX or Line) – never to an input labelled PHONO.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-300 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause from experience we know which phono preamplifier suits which cartridge and which system. We help you with the connection, tell you honestly whether the PHO-300 is enough or the fine-tuning of the PHO-500 is worth it, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577757008,"sku":null,"price":390.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-300-phono-vorverstaerker-schwarz-frontansicht.png?v=1787061369"},{"product_id":"vincent-pho-300-phono-vorverstaerker-silber","title":"Vincent PHO-300 Phono Preamplifier Silver","description":"\u003cp\u003eThe Vincent PHO-300 is a phono preamplifier for MM and MC cartridges with a fully outboard power supply in its own second housing – for a particularly low-noise, clean playback of your turntable at a standard line input.\u003c\/p\u003e\u003cp\u003eIt's the step up from the PHO-200: instead of a plug-in power supply, the PHO-300 gets an elaborate power supply in a separate aluminium housing, connected via a DC cable. This keeps the sensitive amplifier circuit completely decoupled from mains interference.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-300?\u003c\/h2\u003e\u003cp\u003eBecause with a phono preamplifier, the power supply has a real say in the sound. The cartridge signal is tiny and gets heavily amplified – any interference from the power supply would be audible. The PHO-300 solves this thoroughly: power supply and audio section sit in separate housings, cleanly connected via a 5-pin DIN cable.\u003c\/p\u003e\u003cp\u003eSwitchable between MM (Moving Magnet) and MC (Moving Coil), it suits a wide range of cartridges. Both housings are made of high-quality aluminium and fit neatly into the powerLine design. The result is a deep, quiet background from which the music emerges.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own aluminium housing, connected via DIN cable – maximum quiet for the audio section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC switchable:\u003c\/strong\u003e fits Moving Magnet and Moving Coil cartridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-noise circuit:\u003c\/strong\u003e selected components and a high signal-to-noise ratio for clear playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-housing concept:\u003c\/strong\u003e compact aluminium housings in a clean powerLine design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoticeable upgrade:\u003c\/strong\u003e more dynamics and fine resolution than a built-in phono stage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-300 for?\u003c\/h3\u003e\u003cp\u003eFor anyone who takes their turntable seriously and wants more than a simple preamp – but doesn't (yet) need fine-tuning or digitisation. The fully outboard power supply is what brings the audible gain over the PHO-200 here.\u003c\/p\u003e\u003cp\u003eHonestly: the PHO-300 has fixed input values – capacitance is fixed at 300 pF, MC impedance at 100 ohms. If you want to precisely match your MC cartridge or digitise records on your computer, the PHO-500 is the right choice. But for clean, low-noise vinyl enjoyment without any fiddling, the PHO-300 is ideal.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-300 brings the fully outboard power supply into an affordable class: low-noise, cleanly built, MM\/MC-capable. An honest upgrade for anyone who wants to give their turntable a quiet foundation. \u003ca href=\"https:\/\/www.i-fidelity.net\/testberichte\/hifi\/vincent-pho-300\/test.html\" target=\"_blank\" rel=\"noopener\"\u003ei-fidelity.net\u003c\/a\u003e took a closer listen to the PHO-300 in a review.\u003c\/p\u003e\u003cp\u003eWhich phono preamplifier suits your cartridge, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with outboard power supply (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 83 dB, MC above 70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms, MC 100 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e 300 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA, 1 × 5-pin DIN (DC input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, 1 × 5-pin DIN (power supply DC output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 10 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 112 × 60 × 126 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 kg (audio unit), 0.9 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-300 audio unit, PHO-300ps power supply, DIN connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the outboard power supply bring compared to the PHO-200?\u003c\/strong\u003e\u003cbr\u003eThe PHO-200 uses a small plug-in power supply, the PHO-300 an elaborate power supply in its own aluminium housing. This complete separation keeps mains interference even more consistently away from the amplifier circuit – the background becomes quieter, the playback more stable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cartridges is the PHO-300 suited for?\u003c\/strong\u003e\u003cbr\u003eFor Moving Magnet (MM) and Moving Coil (MC) systems. You switch between the two. The input values are fixed (47 kOhms for MM, 100 ohms for MC, 300 pF capacitance) and suit most common cartridges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I adjust the MC impedance on the PHO-300?\u003c\/strong\u003e\u003cbr\u003eNo, the values are fixed. If you want to specifically tune your MC cartridge to different impedances, you need the PHO-500 or PHO-701 with their DIP switches. For standard applications, the fixed design of the PHO-300 is entirely sufficient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I connect the PHO-300?\u003c\/strong\u003e\u003cbr\u003eThe turntable connects via RCA to the audio unit, the ground cable to the ground terminal. You connect the audio unit and power supply via the supplied DIN cable. From the audio unit you run RCA to a high-level input on your amplifier (e.g. AUX or Line) – never to an input labelled PHONO.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-300 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause from experience we know which phono preamplifier suits which cartridge and which system. We help you with the connection, tell you honestly whether the PHO-300 is enough or the fine-tuning of the PHO-500 is worth it, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577789776,"sku":null,"price":390.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-300-phono-vorverstaerker-silber-frontansicht.png?v=1787061447"},{"product_id":"vincent-pho-500-phono-vorverstaerker-mit-usb-schwarz","title":"Vincent PHO-500 Phono Preamplifier with USB Black","description":"\u003cp\u003eThe Vincent PHO-500 is a phono preamplifier for MM and MC cartridges with adjustable input impedance and capacitance, a fully outboard power supply and a USB output that lets you digitise your records on your computer.\u003c\/p\u003e\u003cp\u003eIt's the most flexible model in the transistor phono range: an elaborate power supply in its own housing, high-quality components from renowned manufacturers such as WIMA and Nichicon – and DIP switches let you match it precisely to your cartridge.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-500?\u003c\/h2\u003e\u003cp\u003eBecause an MC cartridge is picky: the termination impedance noticeably affects the sound. Get it wrong and it sounds dull or harsh. The PHO-500 gives you control – DIP switches let you set the MC impedance in steps between 100 and 1000 ohms, and adjust the MM input capacitance between 15 and 350 pF. This way you get the best out of any system.\u003c\/p\u003e\u003cp\u003eThen there's the USB output: this turns the PHO-500 into an A\/D converter, digitising your vinyl treasures at up to 24-bit \/ 192 kHz directly on your computer. As with the larger Vincent models, the power supply sits in its own housing, keeping the sensitive amplifier circuit quiet.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable to your cartridge:\u003c\/strong\u003e MC impedance 100–1000 ohms, MM capacitance 15–350 pF – finely adjustable via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB digitisation:\u003c\/strong\u003e built-in A\/D converter, records your albums at up to 24-bit \/ 192 kHz on your computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own housing for maximum freedom from noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-quality components:\u003c\/strong\u003e parts from WIMA and Nichicon for a high signal-to-noise ratio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC:\u003c\/strong\u003e fits practically any common cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-500 for?\u003c\/h3\u003e\u003cp\u003eFor vinyl listeners who want to precisely tune their cartridge – and for anyone who wants to digitise their record collection. If you've ever run an MC cartridge at a fixed impedance and felt there was more to be had, this is for you.\u003c\/p\u003e\u003cp\u003eHonestly: not everyone needs this flexibility. If you use a standard MM cartridge and don't want to digitise, the PHO-300 is cheaper and just as low-noise. And if you're after the warmer tube sound, look at the PHO-701. The PHO-500 is the tool for anyone who wants to fine-tune and record.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-500 is Vincent's most versatile transistor phono stage: adjustable to your cartridge, with an outboard power supply and USB digitisation. A well-thought-out tool for ambitious vinyl fans – without an esoteric price premium.\u003c\/p\u003e\u003cp\u003eWhether the PHO-500, the leaner PHO-300, or the tube-based PHO-701 suits you, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with outboard power supply and USB A\/D converter (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05% (20 Hz – 20 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 83 dB, MC above 70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms; MC 100–1000 ohms (adjustable via DIP switches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e MM 15–350 pF (adjustable via DIP switches); MC 15 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, USB (A\/D converter up to 24-bit \/ 192 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 10 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 130 × 95 × 205 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 kg (audio unit), 1.4 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-500 audio unit, power supply, connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of the adjustable impedance?\u003c\/strong\u003e\u003cbr\u003eWith moving-coil cartridges, the termination impedance noticeably affects the sound. If it doesn't match, the sound is dull or overemphasised. With the PHO-500's DIP switches, you set the MC impedance between 100 and 1000 ohms and the MM capacitance between 15 and 350 pF to exactly match your cartridge's needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I digitise records with the PHO-500?\u003c\/strong\u003e\u003cbr\u003eYes. Via the USB output, the PHO-500 works as an A\/D converter and records your albums at up to 24-bit \/ 192 kHz on your computer. Recording software (such as the free Audacity) is not included but can be used freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference to the PHO-300?\u003c\/strong\u003e\u003cbr\u003eThe PHO-300 has fixed input values and no USB output. The PHO-500 can be matched to your cartridge via DIP switches and can digitise. Both are low-noise sonically – the PHO-500 is the tool for anyone who needs fine-tuning and USB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePHO-500 or PHO-701 – which is better?\u003c\/strong\u003e\u003cbr\u003eBoth offer fine-tuning and USB. The PHO-500 works purely with transistors and is neutrally tuned. The PHO-701 additionally uses a tube and sounds a touch warmer. Which suits you better depends on your taste in sound – we're happy to let you hear both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-500 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause the adjustment options only help when they're set correctly. We know the right values for common cartridges, help you with the digitisation setup, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577822544,"sku":null,"price":690.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-500-phono-vorverstaerker-mit-usb-schwarz-frontansicht.png?v=1787061244"},{"product_id":"vincent-pho-500-phono-vorverstaerker-mit-usb-silber","title":"Vincent PHO-500 Phono Preamplifier with USB Silver","description":"\u003cp\u003eThe Vincent PHO-500 is a phono preamplifier for MM and MC cartridges with adjustable input impedance and capacitance, a fully outboard power supply and a USB output that lets you digitise your records on your computer.\u003c\/p\u003e\u003cp\u003eIt's the most flexible model in the transistor phono range: an elaborate power supply in its own housing, high-quality components from renowned manufacturers such as WIMA and Nichicon – and DIP switches let you match it precisely to your cartridge.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-500?\u003c\/h2\u003e\u003cp\u003eBecause an MC cartridge is picky: the termination impedance noticeably affects the sound. Get it wrong and it sounds dull or harsh. The PHO-500 gives you control – DIP switches let you set the MC impedance in steps between 100 and 1000 ohms, and adjust the MM input capacitance between 15 and 350 pF. This way you get the best out of any system.\u003c\/p\u003e\u003cp\u003eThen there's the USB output: this turns the PHO-500 into an A\/D converter, digitising your vinyl treasures at up to 24-bit \/ 192 kHz directly on your computer. As with the larger Vincent models, the power supply sits in its own housing, keeping the sensitive amplifier circuit quiet.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable to your cartridge:\u003c\/strong\u003e MC impedance 100–1000 ohms, MM capacitance 15–350 pF – finely adjustable via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB digitisation:\u003c\/strong\u003e built-in A\/D converter, records your albums at up to 24-bit \/ 192 kHz on your computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own housing for maximum freedom from noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-quality components:\u003c\/strong\u003e parts from WIMA and Nichicon for a high signal-to-noise ratio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC:\u003c\/strong\u003e fits practically any common cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-500 for?\u003c\/h3\u003e\u003cp\u003eFor vinyl listeners who want to precisely tune their cartridge – and for anyone who wants to digitise their record collection. If you've ever run an MC cartridge at a fixed impedance and felt there was more to be had, this is for you.\u003c\/p\u003e\u003cp\u003eHonestly: not everyone needs this flexibility. If you use a standard MM cartridge and don't want to digitise, the PHO-300 is cheaper and just as low-noise. And if you're after the warmer tube sound, look at the PHO-701. The PHO-500 is the tool for anyone who wants to fine-tune and record.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-500 is Vincent's most versatile transistor phono stage: adjustable to your cartridge, with an outboard power supply and USB digitisation. A well-thought-out tool for ambitious vinyl fans – without an esoteric price premium.\u003c\/p\u003e\u003cp\u003eWhether the PHO-500, the leaner PHO-300, or the tube-based PHO-701 suits you, we're happy to clarify quickly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e phono preamplifier (MM\/MC) with outboard power supply and USB A\/D converter (powerLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz (±0.5 dB); 10 Hz – 50 kHz (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05% (20 Hz – 20 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 83 dB, MC above 70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms; MC 100–1000 ohms (adjustable via DIP switches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e MM 15–350 pF (adjustable via DIP switches); MC 15 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, USB (A\/D converter up to 24-bit \/ 192 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 10 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 130 × 95 × 205 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 kg (audio unit), 1.4 kg (power supply)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-500 audio unit, power supply, connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat's the benefit of the adjustable impedance?\u003c\/strong\u003e\u003cbr\u003eWith moving-coil cartridges, the termination impedance noticeably affects the sound. If it doesn't match, the sound is dull or overemphasised. With the PHO-500's DIP switches, you set the MC impedance between 100 and 1000 ohms and the MM capacitance between 15 and 350 pF to exactly match your cartridge's needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I digitise records with the PHO-500?\u003c\/strong\u003e\u003cbr\u003eYes. Via the USB output, the PHO-500 works as an A\/D converter and records your albums at up to 24-bit \/ 192 kHz on your computer. Recording software (such as the free Audacity) is not included but can be used freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the difference to the PHO-300?\u003c\/strong\u003e\u003cbr\u003eThe PHO-300 has fixed input values and no USB output. The PHO-500 can be matched to your cartridge via DIP switches and can digitise. Both are low-noise sonically – the PHO-500 is the tool for anyone who needs fine-tuning and USB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePHO-500 or PHO-701 – which is better?\u003c\/strong\u003e\u003cbr\u003eBoth offer fine-tuning and USB. The PHO-500 works purely with transistors and is neutrally tuned. The PHO-701 additionally uses a tube and sounds a touch warmer. Which suits you better depends on your taste in sound – we're happy to let you hear both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-500 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause the adjustment options only help when they're set correctly. We know the right values for common cartridges, help you with the digitisation setup, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577855312,"sku":null,"price":690.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-500-phono-vorverstaerker-mit-usb-silber-frontansicht.png?v=1787061301"},{"product_id":"vincentpho701bl","title":"Vincent PHO-701 Tube Phono Preamplifier Black","description":"\u003cp\u003eThe Vincent PHO-701 is a hybrid phono preamplifier for MM and MC cartridges that brings a 12AU7 tube into the signal path, can be precisely matched to your cartridge via DIP switches, and can digitise your records via USB.\u003c\/p\u003e\u003cp\u003eIt's the flagship model of the Vincent phono range and the successor to the tube classic PHO-700: low-noise transistor amplification, refined by a genuine tube – in two separate housings with a fully outboard power supply.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-701?\u003c\/h2\u003e\u003cp\u003eBecause it combines two worlds. The transistor stage provides a clean, low-noise foundation, while the 12AU7 tube – a dual triode right in the signal path – gives the playback harmonic richness and spatial depth. Vinyl, which can sometimes sound a touch harsh, gains the typical tube glow this way.\u003c\/p\u003e\u003cp\u003eThe PHO-701 is also flexible: DIP switches let you set the MC impedance in steps between 99 and 1000 ohms and the MM capacitance between 15 and 350 pF. And, as with the PHO-500, you can digitise your records at up to 24-bit \/ 192 kHz via USB. The elaborate power supply sits in its own housing.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube in the signal path:\u003c\/strong\u003e a 12AU7 dual triode gives the sound warmth and spatial depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable to your cartridge:\u003c\/strong\u003e MC impedance 99–1000 ohms, MM capacitance 15–350 pF – via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB digitisation:\u003c\/strong\u003e records your albums at up to 24-bit \/ 192 kHz on your computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own housing for a quiet background.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC:\u003c\/strong\u003e fits practically any common cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-701 for?\u003c\/h3\u003e\u003cp\u003eFor vinyl listeners who want the warmer, more musical tube sound while still precisely tuning their cartridge – with the option to digitise records. The best of analogue fine-tuning and tube technology in one device.\u003c\/p\u003e\u003cp\u003eHonestly: if you prefer a neutral, sober sound, the purely transistor-based PHO-500 serves you better – it can do almost the same, just without the tube. The PHO-701 is for anyone who deliberately wants the characterful tube tone. A matter of taste, not of quality.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-701 is Vincent's phono flagship: tube sound, fine-tuning via DIP switches and USB digitisation in a cleanly built two-housing concept. The right choice for anyone who wants to hear vinyl with warmth and character.\u003c\/p\u003e\u003cp\u003eWhether the tube-based PHO-701 or the neutral PHO-500 suits your taste better is best discovered by comparing them directly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e hybrid phono preamplifier (MM\/MC) with tube, outboard power supply and USB A\/D converter (tubeLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube complement:\u003c\/strong\u003e 1 × 12AU7 (dual triode in the signal path)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05% (20 Hz – 20 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 81 dB, MC above 69 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms; MC 99–1000 ohms (adjustable via DIP switches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e MM 15–350 pF (adjustable via DIP switches); MC 15 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, USB (A\/D converter up to 24-bit \/ 192 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 15 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 130 × 95 × 225 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-701 audio unit with tube, power supply, connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the tube bring to the PHO-701?\u003c\/strong\u003e\u003cbr\u003eThe 12AU7 sits as a dual triode right in the signal path and shapes the sound: it gives the playback harmonic richness, some warmth and better spatial presentation. Especially with vinyl, which can sometimes sound a bit harsh, it adds more glow – without losing detail resolution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I match the PHO-701 to my MC cartridge?\u003c\/strong\u003e\u003cbr\u003eYes. DIP switches let you set the MC impedance in steps between 99 and 1000 ohms and the MM capacitance between 15 and 350 pF. This way you tune the PHO-701 exactly to your system – bringing out fine resolution and the right tonal balance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PHO-701 also digitise records?\u003c\/strong\u003e\u003cbr\u003eYes. Via the USB output it works as an A\/D converter and records your albums at up to 24-bit \/ 192 kHz on your computer. Recording software (such as the free Audacity) is not included but can be used freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePHO-701 or PHO-500 – which suits me?\u003c\/strong\u003e\u003cbr\u003eTechnically they're similar: both adjustable, both with USB. The difference is the sound. The PHO-500 works purely with transistors and is neutral, the PHO-701 adds the tube and sounds warmer. If you like tube sound, the PHO-701 is your device – otherwise the PHO-500 is enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-701 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause tube sound is a matter of taste and the adjustment values need to be set correctly. We let you compare the PHO-701 and PHO-500 at leisure, know the right impedance values for common cartridges, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577888080,"sku":null,"price":790.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-701-roehren-phono-vorverstaerker-schwarz-frontansicht.jpg?v=1787061354"},{"product_id":"vincentpho701si","title":"Vincent PHO-701 Tube Phono Preamplifier Silver","description":"\u003cp\u003eThe Vincent PHO-701 is a hybrid phono preamplifier for MM and MC cartridges that brings a 12AU7 tube into the signal path, can be precisely matched to your cartridge via DIP switches, and can digitise your records via USB.\u003c\/p\u003e\u003cp\u003eIt's the flagship model of the Vincent phono range and the successor to the tube classic PHO-700: low-noise transistor amplification, refined by a genuine tube – in two separate housings with a fully outboard power supply.\u003c\/p\u003e\u003ch2\u003eWhy the PHO-701?\u003c\/h2\u003e\u003cp\u003eBecause it combines two worlds. The transistor stage provides a clean, low-noise foundation, while the 12AU7 tube – a dual triode right in the signal path – gives the playback harmonic richness and spatial depth. Vinyl, which can sometimes sound a touch harsh, gains the typical tube glow this way.\u003c\/p\u003e\u003cp\u003eThe PHO-701 is also flexible: DIP switches let you set the MC impedance in steps between 99 and 1000 ohms and the MM capacitance between 15 and 350 pF. And, as with the PHO-500, you can digitise your records at up to 24-bit \/ 192 kHz via USB. The elaborate power supply sits in its own housing.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube in the signal path:\u003c\/strong\u003e a 12AU7 dual triode gives the sound warmth and spatial depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable to your cartridge:\u003c\/strong\u003e MC impedance 99–1000 ohms, MM capacitance 15–350 pF – via DIP switches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB digitisation:\u003c\/strong\u003e records your albums at up to 24-bit \/ 192 kHz on your computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully outboard power supply:\u003c\/strong\u003e its own housing for a quiet background.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMM and MC:\u003c\/strong\u003e fits practically any common cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho is the PHO-701 for?\u003c\/h3\u003e\u003cp\u003eFor vinyl listeners who want the warmer, more musical tube sound while still precisely tuning their cartridge – with the option to digitise records. The best of analogue fine-tuning and tube technology in one device.\u003c\/p\u003e\u003cp\u003eHonestly: if you prefer a neutral, sober sound, the purely transistor-based PHO-500 serves you better – it can do almost the same, just without the tube. The PHO-701 is for anyone who deliberately wants the characterful tube tone. A matter of taste, not of quality.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PHO-701 is Vincent's phono flagship: tube sound, fine-tuning via DIP switches and USB digitisation in a cleanly built two-housing concept. The right choice for anyone who wants to hear vinyl with warmth and character.\u003c\/p\u003e\u003cp\u003eWhether the tube-based PHO-701 or the neutral PHO-500 suits your taste better is best discovered by comparing them directly: call us on +41 44 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or drop by HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e hybrid phono preamplifier (MM\/MC) with tube, outboard power supply and USB A\/D converter (tubeLine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube complement:\u003c\/strong\u003e 1 × 12AU7 (dual triode in the signal path)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz – 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e below 0.05% (20 Hz – 20 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e MM 58 mV, MC 6.8 mV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e MM above 81 dB, MC above 69 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e MM 47 kOhms; MC 99–1000 ohms (adjustable via DIP switches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput capacitance:\u003c\/strong\u003e MM 15–350 pF (adjustable via DIP switches); MC 15 pF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 250 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e MM 40 dB, MC 60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × stereo RCA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × stereo RCA, USB (A\/D converter up to 24-bit \/ 192 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. power consumption:\u003c\/strong\u003e 15 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per housing (W × H × D):\u003c\/strong\u003e 130 × 95 × 225 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in the box:\u003c\/strong\u003e PHO-701 audio unit with tube, power supply, connecting cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat does the tube bring to the PHO-701?\u003c\/strong\u003e\u003cbr\u003eThe 12AU7 sits as a dual triode right in the signal path and shapes the sound: it gives the playback harmonic richness, some warmth and better spatial presentation. Especially with vinyl, which can sometimes sound a bit harsh, it adds more glow – without losing detail resolution.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I match the PHO-701 to my MC cartridge?\u003c\/strong\u003e\u003cbr\u003eYes. DIP switches let you set the MC impedance in steps between 99 and 1000 ohms and the MM capacitance between 15 and 350 pF. This way you tune the PHO-701 exactly to your system – bringing out fine resolution and the right tonal balance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the PHO-701 also digitise records?\u003c\/strong\u003e\u003cbr\u003eYes. Via the USB output it works as an A\/D converter and records your albums at up to 24-bit \/ 192 kHz on your computer. Recording software (such as the free Audacity) is not included but can be used freely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePHO-701 or PHO-500 – which suits me?\u003c\/strong\u003e\u003cbr\u003eTechnically they're similar: both adjustable, both with USB. The difference is the sound. The PHO-500 works purely with transistors and is neutral, the PHO-701 adds the tube and sounds warmer. If you like tube sound, the PHO-701 is your device – otherwise the PHO-500 is enough.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the PHO-701 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause tube sound is a matter of taste and the adjustment values need to be set correctly. We let you compare the PHO-701 and PHO-500 at leisure, know the right impedance values for common cartridges, and are personally there for you in Wädenswil on Lake Zurich.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMore from the brand is available in the \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent\u003c\/a\u003e overview. The right turntable is found among our \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more preamps among our \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifiers\u003c\/a\u003e. We're happy to add the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e too.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"Default Title","offer_id":52989577920848,"sku":null,"price":790.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-pho-701-roehren-phono-vorverstaerker-silber-frontansicht.jpg?v=1787061415"},{"product_id":"rega-planar-8-se-3-swiss-edition","title":"Rega Planar 8 SE 3 – Swiss Edition","description":"\u003cp\u003eThe Rega Planar 8 SE 3 Swiss Edition is a perfectly matched high-end analog set that bundles Rega's Planar 8 with the Apheta 3 MC cartridge and the AOS phono stage into one complete chain. A combination put together exclusively for the Swiss market, where every link fits the next – you don't have to piece anything together yourself.\u003c\/p\u003e\n\u003ch2\u003eWhy the Planar 8 SE 3?\u003c\/h2\u003e\n\u003cp\u003eThe Planar 8 is Rega's reach for the reference: a skeletal Tancast 8 plinth for minimal mass, a three-layer glass platter, the hand-built RB880 tonearm and the external Neo power supply with DSP control for ultra-stable speed stability. Add to that the Apheta 3, an MC cartridge with a fine Fine-Line diamond, and the AOS phono stage, tailored exactly to systems like this. Three components that already shine on their own – together they add up to more than the sum of their parts.\u003c\/p\u003e\n\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\n\u003cp\u003eCalm, precision and structure. The Planar 8 tracks with a composure that creates deep black between notes; the Apheta 3 digs the finest information out of the groove, and the AOS brings it across low-noise and dynamic, right on point. Bass is dry and firm, the soundstage is large and cleanly organized. This is high-end that doesn't show off – it just gets it right.\u003c\/p\u003e\n\u003ch3\u003eWho is the Planar 8 SE 3 for? (and who it isn't – straight talk)\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants an uncompromising analog chain from a single source, without spending months weighing components against each other. Straight talk: this is a serious high-end set at the price to match – if you're just starting out with vinyl, you're better served with a Planar 3. And: the Apheta 3 is professionally fitted and aligned by us; it doesn't come pre-mounted from the factory.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Planar 8 SE 3 is the elegant route to real high-end analog: fully thought through, perfectly combined, and sonically a class you rarely hear pulled together this coherently. At HD Zürisee in Wädenswil, we set up the set for you and tune it to your amplifier and room.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTurntable: Rega Planar 8 with hand-built RB880 tonearm\u003c\/li\u003e\n\u003cli\u003ePlinth: skeletal Tancast 8 construction with HPL laminate\u003c\/li\u003e\n\u003cli\u003ePlatter: three-layer, laminated glass platter\u003c\/li\u003e\n\u003cli\u003ePower supply: Neo PSU with DSP control (external)\u003c\/li\u003e\n\u003cli\u003eDrive belt: Reference EBLT\u003c\/li\u003e\n\u003cli\u003eCartridge: Rega Apheta 3 (MC, Fine-Line diamond) – fitted and aligned by us\u003c\/li\u003e\n\u003cli\u003ePhono stage: Rega AOS high-end MC phono stage\u003c\/li\u003e\n\u003cli\u003eTurntable dimensions (W × H × D, with lid): 420 × 125 × 315 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.2 kg (turntable) + 0.6 kg (Neo PSU)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: Planar 8 with RB880 tonearm, Neo PSU, Reference EBLT belt, dust cover, Rega Apheta 3 and Rega AOS phono stage (cartridge not factory-fitted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Apheta 3 cartridge fitted at the factory?\u003c\/h3\u003e\n\u003cp\u003eNo. The Apheta 3 is included with the set, but not pre-mounted. We fit and align it professionally at HD Zürisee on the RB880 tonearm – including tracking force, azimuth and anti-skate – so the chain shows its potential from the very first groove.\u003c\/p\u003e\n\u003ch3\u003eDo I also need an amplifier?\u003c\/h3\u003e\n\u003cp\u003eYes. The set includes the turntable, cartridge and phono stage – the AOS outputs a line-level signal that you connect to any amplifier with a high-level input. Speakers and amplifier are not part of the set; we're happy to advise you on the right choice for your budget and room.\u003c\/p\u003e\n\u003ch3\u003eWhat makes the Swiss Edition special?\u003c\/h3\u003e\n\u003cp\u003eThe Swiss Edition is a combination put together exclusively for the Swiss market from the Planar 8, Apheta 3 and AOS phono stage – fully matched and priced more attractively as a set than the individual components. A turnkey reference chain with no compatibility guesswork.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Rega Planar 8 SE 3 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause high-end analog needs proper setup, not just good components. We fit and align the cartridge, tune the chain to your system, and handle the warranty cleanly as an authorized dealer. Personal advice and service from our technician Mauri – on Lake Zurich in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAll that's missing for the chain is the right \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e. Find more from the analog range among our \u003ca href=\"\/en\/collections\/rega\"\u003eRega components\u003c\/a\u003e.\u003c\/p\u003e","brand":"Rega","offers":[{"title":"Swiss Edition Set","offer_id":53024116965712,"sku":null,"price":5299.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/rega-planar-8-se-3-swiss-edition-plattenspieler-lieferumfang.jpg?v=1786633982"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/phono-vorverstarker.oembed?page=2","provider":"HD Zürisee AG","version":"1.0","type":"link"}