{"title":"Limited Edition","description":"\u003cp\u003eA limited edition is a deliberately limited run – special material, a special colour, or simply a limited quantity – that can no longer be reordered as usual once it's sold out.\u003c\/p\u003e\u003cp\u003eAt HD Zürisee, the models in this category change: sometimes a limited turntable with an unusual finish, sometimes a special edition cartridge, sometimes headphones made from an unusual material. What's currently available is shown at the top of the list – it changes faster than our regular range, because once a piece is gone, it won't come back in this form. If you have your eye on a particular model, it's better to ask sooner rather than later.\u003c\/p\u003e\u003cp\u003ePlain talk: a limited edition isn't automatically the better choice – sometimes you're mainly paying for the rarity. Whether it's worth it for you depends on the device and your ears. Get advice before you decide: by phone, WhatsApp, or in person at our place in Wädenswil. Related: \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eheadphones\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"goldnotebellagioconquestblack","title":"Gold Note Bellagio Conquest Turntable Base, Black","description":"\u003cp\u003eThe Gold Note Bellagio Conquest is a turntable base from the Italian limited-edition series, built with 100 kilograms of mass, thirteen curved plinths and a 270-millimetre-long spindle, and deliberately supplied without tonearm and cartridge.\u003c\/p\u003e\n\u003cp\u003e\"Base\" is meant literally here: Gold Note builds the drive, bearing and chassis, and leaves the tracking to you with the Conquest. That sounds like extra work, and in truth it's the real luxury, because you choose tonearm, cartridge and phono stage to your own taste instead of from a single manufacturer's catalogue.\u003c\/p\u003e\n\u003ch2\u003eWhy the Bellagio Conquest?\u003c\/h2\u003e\n\u003cp\u003eBecause here almost everything is solved through mass and geometry rather than electronics. Thirteen differently curved plinths form the chassis: the suspended plinth in triple black-polished acrylic, the main plinth in a five-layer double construction of acrylic and titanium. The spindle measures 270 millimetres, is made of hardened C40 carbon steel and is, according to Gold Note's own claim, the longest spindle ever built for a turntable. It's guided by a 4.7-millimetre ceramic ball bearing in a polished bronze housing, machined to a tolerance of one hundredth of a millimetre. The platter is driven by a rectified deluxe EPDM belt over an hourglass-shaped pulley, powered by an externally fed 12-volt high-torque synchronous motor with a PWM power stage and triple AC-DC-AC conversion.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eSilence. Minus 85 decibels of rumble and 0.05 percent wow and flutter aren't brochure poetry — they're audible as a jet-black background against which instruments stay put instead of wandering. The 110-millimetre-tall Sustarin platter takes the micro-restlessness away from the stylus before it even arises. And because the motor power can be adjusted via remote control, you get to watch the turntable base's character change: more torque for densely pressed records, less for a quiet solo recording.\u003c\/p\u003e\n\u003ch3\u003eWho is the Bellagio Conquest suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners at the end of their search, who bring space, structural stability and patience. Plain talk: 125 centimetres of height and 100 kilograms aren't a piece of furniture, they're a structural decision, and the setup is not a Sunday-afternoon affair. If you're looking for something you unpack, plug in and play, this isn't it — tonearm, cartridge and phono stage are missing from the factory. If you want exactly that freedom, there's little comparable anywhere in the world.\u003c\/p\u003e\n\u003ch3\u003eOur verdict\u003c\/h3\u003e\n\u003cp\u003eThe Conquest isn't a device you buy, it's one you arrive at. It solves the task of a turntable base the most honest way there is: with material and precision instead of sonic tricks. Tell us which tonearm and which cartridge you have in mind — at HD Zürisee in Wädenswil we clarify the right tonearm mount with Gold Note in advance, put the whole system together, and set it up for you on site.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: turntable base from the limited-edition series, without tonearm and cartridge\u003c\/li\u003e\n\u003cli\u003eDrive: belt drive, rectified deluxe EPDM belt (70 Shore), hourglass-shaped pulley\u003c\/li\u003e\n\u003cli\u003eMotor: 12 V high-torque synchronous motor, externally powered\u003c\/li\u003e\n\u003cli\u003eMotor control: PWM power stage with triple AC-DC-AC conversion, adjustable motor power\u003c\/li\u003e\n\u003cli\u003eSpeeds: 33⅓ and 45 rpm, ±0.1%, electronically switchable with fine pitch\u003c\/li\u003e\n\u003cli\u003eRemote control: on\/off, speed change, fine pitch, motor power\u003c\/li\u003e\n\u003cli\u003ePlatter: Sustarin (POM), 110 mm height\u003c\/li\u003e\n\u003cli\u003eSpindle: 270 mm, hardened C40 carbon steel, with platter clamp\u003c\/li\u003e\n\u003cli\u003eBearing: 4.7 mm ceramic ball bearing, polished bronze bearing housing, manufacturing tolerance 1\/100 mm\u003c\/li\u003e\n\u003cli\u003eChassis: 13 differently curved plinths; suspended plinth in triple black-polished acrylic, main plinth in five-layer double acrylic and titanium\u003c\/li\u003e\n\u003cli\u003eMetal parts: black and chrome, black platter\u003c\/li\u003e\n\u003cli\u003eWow and flutter: 0.05%\u003c\/li\u003e\n\u003cli\u003eRumble: −85 dB\u003c\/li\u003e\n\u003cli\u003ePower supply: 100–240 V, 50 or 60 Hz depending on market, non-switchable, 20 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 530 × 1250 × 500 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 100 kg\u003c\/li\u003e\n\u003cli\u003eScope of delivery: turntable base with external motor supply and control unit plus remote control; without tonearm, cartridge and phono stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Bellagio Conquest supplied with a tonearm?\u003c\/h3\u003e\n\u003cp\u003eNo. The Conquest is a pure turntable base: Gold Note supplies chassis, bearing, platter, motor and control unit, but neither tonearm, cartridge nor phono stage. You choose these three building blocks freely, matched to your sound preference and the rest of your system. We put the combination together together with you.\u003c\/p\u003e\n\u003ch3\u003eWhy is the Conquest called a \"base\" and not a \"turntable\"?\u003c\/h3\u003e\n\u003cp\u003eBecause it lacks the tracking unit from the factory. A turntable is ready to play; a base is the driving foundation for one. Gold Note accordingly lists the Conquest as a Turntable Base. Only once a tonearm and cartridge are fitted does it become a complete turntable.\u003c\/p\u003e\n\u003ch3\u003eWhat can be remote-controlled on the Conquest?\u003c\/h3\u003e\n\u003cp\u003eSwitching on and off, changing between 33⅓ and 45 revolutions, fine speed adjustment, and motor power. So you can adapt the torque to the music: less for quiet, delicate recordings, more for densely pressed, dynamic records.\u003c\/p\u003e\n\u003ch3\u003eWhat kind of support does a 100-kilogram turntable base need?\u003c\/h3\u003e\n\u003cp\u003eA load-bearing, low-vibration surface. The Conquest stands freely and needs no rack, but it does need a floor that can handle 100 kilograms on a small footprint. With wooden beam ceilings or springy parquet flooring, we look at the placement together beforehand.\u003c\/p\u003e\n\u003ch3\u003eHow does the Conquest differ from the Bellagio Reference?\u003c\/h3\u003e\n\u003cp\u003eThe Conquest has thirteen plinths, a 270-millimetre C40 spindle, a 110-millimetre-tall Sustarin platter, and stands 125 centimetres tall. The Reference comes with five plinths, a 90-millimetre POM platter and 35 centimetres of height. Rumble also sets them apart: minus 85 versus minus 83 decibels.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Bellagio Conquest from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a base without a tonearm only becomes an instrument through the right combination. We clarify the right tonearm mount with Gold Note in advance, match arm, cartridge and phono stage to each other, and set up the Conquest for you on site. Our technician Mauri remains your point of contact afterwards.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe most important building block is the \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearm\u003c\/a\u003e, followed by a \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a phono stage from the \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamplifier\u003c\/a\u003e category. For record care, it's worth looking at \u003ca href=\"\/en\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e, and you'll find further turntable bases under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989508649296,"sku":"304374","price":48000.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-bellagio-conquest-laufwerk-schwarz-frontansicht.jpg?v=1785925253"},{"product_id":"goldnotebellagioconquestgd","title":"Gold Note Bellagio Conquest Turntable Base, Gold Leaf","description":"\u003cp\u003eThe Gold Note Bellagio Conquest Gold Leaf is a turntable base from the limited-edition series whose plinths are finished in real gold leaf instead of black acrylic — mechanically identical to the black version and likewise supplied without tonearm and cartridge.\u003c\/p\u003e\n\u003cp\u003eGold Note manufactures near Florence, in Tuscany, right in a region where gilding has been a craft for centuries, not a marketing term. That's exactly where this version comes from: the same machine, a different skin.\u003c\/p\u003e\n\u003ch2\u003eWhy the gold leaf version?\u003c\/h2\u003e\n\u003cp\u003eBecause gold leaf isn't a lacquer, it's a technique. Wafer-thin gold foil is laid down and pressed on strip by strip; the fine seams between the strips aren't a flaw but the signature of genuine craftsmanship. Gold Note specifies two positions in gold leaf for this version: the suspended plinth and the five-layer main plinth, the latter combined with titanium. Metal parts stay black and chromed, the platter stays black — it's the plinth that's gilded, not the whole unit. Underneath, the Conquest mechanics remain unchanged: thirteen curved plinths, a 270-millimetre spindle in C40 carbon steel, ceramic ball bearing in a polished bronze housing, and an externally fed 12-volt synchronous motor with PWM power stage.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eSonically, exactly what the black version delivers: 100 kilograms of mass that take all nervousness out of the sound, minus 85 decibels of rumble and 0.05 percent wow and flutter. On top of that comes a surface that reacts to light instead of absorbing it, and one that won't change over the years, because gold simply doesn't oxidise. Via the remote control you set speed, fine pitch and motor power — the rest is physics.\u003c\/p\u003e\n\u003ch3\u003eWho is the Conquest Gold Leaf suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners for whom the unit's appearance matters just as much as its behaviour in the groove. Plain talk: if you only want the technology, the black version is cheaper and you won't hear a difference — the two are, measurement for measurement, the same turntable base. And the gold finish wants to be treated with respect: no wiping with a kitchen towel, no moving it single-handedly. If you can live with that, you get a piece you don't replace, you pass down.\u003c\/p\u003e\n\u003ch3\u003eOur verdict\u003c\/h3\u003e\n\u003cp\u003eThe gold leaf version isn't a better decision, it's a different one: the same substance, a different demand on the room it stands in. If you want that, plan it properly. Tell us about your room and your dream setup — at HD Zürisee in Wädenswil we put together arm, cartridge and phono stage, deliver, and set it up on site.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: turntable base from the limited-edition series, without tonearm and cartridge\u003c\/li\u003e\n\u003cli\u003eFinish: real gold leaf on the plinths\u003c\/li\u003e\n\u003cli\u003eChassis: 13 differently curved plinths; suspended plinth in gold leaf, main plinth in five layers of gold leaf and titanium\u003c\/li\u003e\n\u003cli\u003eMetal parts: black and chrome, black platter\u003c\/li\u003e\n\u003cli\u003eDrive: belt drive, rectified deluxe EPDM belt (70 Shore), hourglass-shaped pulley\u003c\/li\u003e\n\u003cli\u003eMotor: 12 V high-torque synchronous motor, externally powered\u003c\/li\u003e\n\u003cli\u003eMotor control: PWM power stage with triple AC-DC-AC conversion, adjustable motor power\u003c\/li\u003e\n\u003cli\u003eSpeeds: 33⅓ and 45 rpm, ±0.1%, electronically switchable with fine pitch\u003c\/li\u003e\n\u003cli\u003eRemote control: on\/off, speed change, fine pitch, motor power\u003c\/li\u003e\n\u003cli\u003ePlatter: Sustarin (POM), 110 mm height\u003c\/li\u003e\n\u003cli\u003eSpindle: 270 mm, hardened C40 carbon steel, with platter clamp\u003c\/li\u003e\n\u003cli\u003eBearing: 4.7 mm ceramic ball bearing, polished bronze bearing housing, manufacturing tolerance 1\/100 mm\u003c\/li\u003e\n\u003cli\u003eWow and flutter: 0.05%\u003c\/li\u003e\n\u003cli\u003eRumble: −85 dB\u003c\/li\u003e\n\u003cli\u003ePower supply: 100–240 V, 50 or 60 Hz depending on market, non-switchable, 20 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 530 × 1250 × 500 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 100 kg\u003c\/li\u003e\n\u003cli\u003eScope of delivery: turntable base with external motor supply and control unit plus remote control; without tonearm, cartridge and phono stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Conquest Gold Leaf technically different from the black version?\u003c\/h3\u003e\n\u003cp\u003eNo. Chassis construction, 270-millimetre spindle, ceramic bearing, Sustarin platter, motor and control unit are identical, as are the measured values of 0.05 percent wow and flutter and minus 85 decibels of rumble. The only difference lies in the finish of the plinths. Listen to both side by side and you're hearing the same turntable base twice.\u003c\/p\u003e\n\u003ch3\u003eWhich parts of the turntable base are gilded?\u003c\/h3\u003e\n\u003cp\u003eThe plinths. For this version, Gold Note executes the suspended plinth in gold leaf and the five-layer main plinth in gold leaf with titanium. Metal parts stay black and chromed, the platter stays black. So it's the visible plinth that's gilded, not the entire unit.\u003c\/p\u003e\n\u003ch3\u003eHow do I care for a gold leaf surface?\u003c\/h3\u003e\n\u003cp\u003eDry and without pressure. Gold doesn't oxidise and therefore won't tarnish, but the layer is wafer-thin. A soft duster or a dry microfibre cloth is enough — cleaning agents and polish have no place on gold leaf. Gloves are advisable when adjusting the turntable base.\u003c\/p\u003e\n\u003ch3\u003eIs the Conquest Gold Leaf supplied with a tonearm?\u003c\/h3\u003e\n\u003cp\u003eNo. The gilded version, too, is a pure turntable base and comes without tonearm, cartridge and phono stage. You choose these parts separately, which is exactly what makes this class of device appealing: you determine the sound character yourself instead of taking over a ready-made combination.\u003c\/p\u003e\n\u003ch3\u003eHow much space does the Bellagio Conquest need in the room?\u003c\/h3\u003e\n\u003cp\u003eIt measures 530 millimetres in width, 500 in depth and 1250 in height, and stands freely in the room rather than on a rack. Around it you need freedom of movement for placing records and adjusting it, plus a surface that can safely carry 100 kilograms.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Conquest Gold Leaf from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a hand-gilded turntable base without a tonearm needs planning, not an order button. We match arm, cartridge and phono stage to your system, clarify the tonearm mount with Gold Note in advance, and take care of delivery and setup. As an established specialist team in Wädenswil, we remain available afterwards too.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFirst the \u003ca href=\"\/en\/collections\/tonarme\"\u003etonearm\u003c\/a\u003e, then the \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a phono stage from the \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono amplifier\u003c\/a\u003e category. You'll find brushes, mats and record weights under \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e, and further turntable bases under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989508682064,"sku":"304375","price":55000.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-bellagio-conquest-laufwerk-blattgold-frontansicht.jpg?v=1785925253"},{"product_id":"gradothehemp","title":"Grado Reference The Hemp Open-Back Headphones (Limited Edition)","description":"\u003cp\u003eThe Grado The Hemp is an open-back over-ear headphone from a limited run, whose housing is made from pressed hemp and maple.\u003c\/p\u003e\n\u003cp\u003eHemp was new territory for Grado: a material that had never carried a headphone housing before. Combined with maple, it produces a sound that stays warm yet precise – and a housing that looks like nothing else in the Grado range.\u003c\/p\u003e\n\u003ch2\u003eWhy The Hemp?\u003c\/h2\u003e\n\u003cp\u003eHemp and maple damp resonances each in their own way. Grado combines both to balance warmth and precision instead of committing to just one. The Hemp also introduced the large F-cushion to the range: it keeps the ear at a distance, opens up the soundstage and gives the sound room to breathe.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA full, warm foundation, the famous Grado midrange, and an open soundstage with clear localisation. The frequency response spans 13 to 28,000 Hz. The hemp-maple housing gives the presentation an organic, slightly earthy character that no other Grado quite has.\u003c\/p\u003e\n\u003ch3\u003eWho is The Hemp for?\u003c\/h3\u003e\n\u003cp\u003eFor enthusiasts and collectors after a warm, characterful Grado outside the regular models. Straight talk: it's built open, with no isolation whatsoever – on the train, on the bus or in a shared office it's out of place. And if you're after analytical neutrality, The Hemp isn't the right choice either.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Hemp is a charming one-off: warm wooden sound from an unusual material, with the large F-cushion and a look that starts conversations. A Grado for anyone who'd rather have something individual on the shelf than the model everyone already knows.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Open-back over-ear headphone (Open-Back, dynamic), Limited Edition\u003c\/li\u003e\n\u003cli\u003eSeries: Grado Reference\u003c\/li\u003e\n\u003cli\u003eOperating principle: Open Air\u003c\/li\u003e\n\u003cli\u003eDriver: 44 mm, dynamic\u003c\/li\u003e\n\u003cli\u003eDriver matching: 0.05 dB\u003c\/li\u003e\n\u003cli\u003eHousing: Hemp and maple\u003c\/li\u003e\n\u003cli\u003eFrequency response: 13–28,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 38 Ω\u003c\/li\u003e\n\u003cli\u003eCushions: F-cushion\u003c\/li\u003e\n\u003cli\u003eCable: 8-conductor, permanently attached\u003c\/li\u003e\n\u003cli\u003eHeadband: Padded leather with white stitching\u003c\/li\u003e\n\u003cli\u003eConnector: 3.5 mm jack, 6.3 mm adapter included\u003c\/li\u003e\n\u003cli\u003eManufacturing: Hand-assembled in Brooklyn, NY\u003c\/li\u003e\n\u003cli\u003eWhat's included: Headphones, 6.3 mm jack adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat makes the Grado The Hemp special?\u003c\/h3\u003e\n\u003cp\u003eThe housing: Grado presses hemp and combines it with maple, giving the sound its own organic character. Add to that the large F-cushion, which gives the ear space and opens up the soundstage. The model was released as a Limited Edition.\u003c\/p\u003e\n\u003ch3\u003eWhat are the technical specs of the Grado The Hemp?\u003c\/h3\u003e\n\u003cp\u003eIt runs on a 44mm dynamic driver, matched to 0.05 dB, covers 13 to 28,000 Hz and sits at 38 Ω nominal. The fixed 8-conductor cable ends in a 3.5mm jack, with the 6.3mm adapter included. It's hand-built in Brooklyn.\u003c\/p\u003e\n\u003ch3\u003eDoes the Grado The Hemp need a headphone amplifier?\u003c\/h3\u003e\n\u003cp\u003eNot required. At 38 Ω, The Hemp works fine from mobile sources and the headphone output of an integrated amplifier too. With its own headphone amplifier or DAC, though, it gains audibly in calm, control and bass definition – the large F-cushion rewards you for it.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Grado The Hemp from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a special edition needs someone who knows the whole series. HD Zürisee in Wädenswil is an authorised Grado dealer; we'll place The Hemp sonically against the rest of the Reference models and give you an honest recommendation. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA good \u003ca href=\"\/en\/collections\/kopfhorerverstarker\"\u003eheadphone amplifier\u003c\/a\u003e is worth it for The Hemp. Replacement F-cushions and extension cables are in our \u003ca href=\"\/en\/collections\/kopfhoerer-zubehor\"\u003eheadphone accessories\u003c\/a\u003e, and the rest of the range is under \u003ca href=\"\/en\/collections\/kopfhorer\"\u003eheadphones\u003c\/a\u003e.\u003c\/p\u003e","brand":"Grado","offers":[{"title":"Default Title","offer_id":52989512548688,"sku":"304124","price":529.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/grado-reference-the-hemp-open-back-kopfhoerer-rueckansicht.jpg?v=1785926008"},{"product_id":"ortofon-2m-black-lvb-250-tonabnehmer","title":"Ortofon 2M Black LVB 250 MM Cartridge","description":"\u003cp\u003eThe Ortofon 2M Black LVB 250 is a top-class MM cartridge that mounts the 2M Black's nude Shibata stylus on a boron cantilever – a limited edition honouring Ludwig van Beethoven's 250th birthday. This exact combination also shaped Ortofon's celebrated MC Cadenza Black.\u003c\/p\u003e\n\u003ch2\u003eWhy the 2M Black LVB 250?\u003c\/h2\u003e\n\u003cp\u003eBecause it pushes the already outstanding 2M Black further in the areas that matter. The extremely stiff, lightweight boron cantilever delivers more transparency, speed and responsiveness than the standard Black. On top of that comes a newly developed damping system based on a nano-filler (MWCNT) for the optimal compromise between compliance and control.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eFine resolution right up into the highest frequencies that leaves some Moving Coil cartridges looking dated – and still the uncomplicated handling of an MM. The slim, highly polished Shibata profile hugs the groove walls over a large contact area: detailed, fast, with authority in the bass. MC territory, without the MC effort.\u003c\/p\u003e\n\u003ch3\u003eWho is the 2M Black LVB 250 for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for analogue enthusiasts with a high-quality turntable and a good tonearm who want the absolute maximum from the 2M world. \u003cstrong\u003eBottom line:\u003c\/strong\u003e On a mediocre turntable or with a weak phono stage, the premium over the standard Black simply can't be justified – this edition only pays off with an equally capable setup.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Beethoven Edition is the pinnacle of the 2M series: Shibata on boron, MC-level fine detail, MM-level convenience. The European trade press named it the best cartridge of its year with the EISA Award \"Best Phono Cartridge 2021-2022\". On an equally capable turntable, a small revelation – and a nice piece of hi-fi history to go with it.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCartridge type: MM (Moving Magnet)\u003c\/li\u003e\n\u003cli\u003eEdition: Ludwig van Beethoven 250 (limited)\u003c\/li\u003e\n\u003cli\u003eStylus tip: Shibata, nude\u003c\/li\u003e\n\u003cli\u003eCantilever: boron\u003c\/li\u003e\n\u003cli\u003eTip radius: r\/R 6\/50 µm\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 5 mV (1 kHz, 5 cm\/s)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 20–31,000 Hz · frequency response: 20–20,000 Hz (+2\/−1 dB)\u003c\/li\u003e\n\u003cli\u003eChannel separation: 27 dB (1 kHz) \/ 15 dB (15 kHz)\u003c\/li\u003e\n\u003cli\u003eStylus compliance: 22 µm\/mN\u003c\/li\u003e\n\u003cli\u003eRecommended tracking force: 1.6 g (1.5–1.7 g)\u003c\/li\u003e\n\u003cli\u003eRecommended load: 47 kOhm · 150–300 pF\u003c\/li\u003e\n\u003cli\u003eInternal impedance: 1.2 kOhm · inductance: 630 mH\u003c\/li\u003e\n\u003cli\u003eWinding: silver-plated OFC copper wire · damping: MWCNT nano-filler\u003c\/li\u003e\n\u003cli\u003eBody material: Lexan DMX · height: 18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.2 g\u003c\/li\u003e\n\u003cli\u003eReplacement stylus: Stylus 2M Black LVB 250\u003c\/li\u003e\n\u003cli\u003eIncluded: cartridge, stylus brush, screwdriver, mounting screws, alignment gauge (the 2M packaging serves as an alignment gauge)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets the LVB 250 apart from the regular 2M Black?\u003c\/h3\u003e\n\u003cp\u003eMainly the cantilever: boron instead of aluminium. That further reduces moving mass and brings more transparency and speed, plus the new MWCNT damping. Both share the same stylus tip (nude Shibata) and generator – sonically the LVB 250 plays audibly finer and more controlled.\u003c\/p\u003e\n\u003ch3\u003eCan I upgrade an existing 2M Black or Bronze to LVB 250?\u003c\/h3\u003e\n\u003cp\u003eYes. Generator and body are the same across the 2M cartridges – you simply plug the Stylus 2M Black LVB 250 replacement stylus into an existing 2M Black or Bronze body and get the Beethoven technology with boron cantilever and Shibata stylus. Considerably cheaper than a complete cartridge and done in two minutes.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Ortofon 2M Black LVB 250 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a cartridge of this class deserves a perfect setup and an honest assessment – we'll tell you whether your turntable is worth the premium. HD Zürisee in Wädenswil has served demanding analogue customers for decades and, on request, sets up the LVB 250 with millimetre precision. Call us or send us a message.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e a high-quality \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e, a first-rate \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e as a foundation, and other \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e to compare.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":52989545185616,"sku":"301418","price":1049.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/ortofon-2m-black-lvb-250-tonabnehmer-perspektive-links.png?v=1786628441"},{"product_id":"ortofon-2m-black-lvb-250-premounted-tonabnehmer","title":"Ortofon 2M Black LVB 250 Premounted (Shibata)","description":"\u003cp\u003eThe Ortofon 2M Black LVB 250 Premounted is a Moving Magnet cartridge from the Beethoven anniversary edition, supplied factory-mounted on an Ortofon headshell. You simply attach the ready-made package to your tonearm's SME bayonet mount, adjust the tracking force – and listen.\u003c\/p\u003e\n\u003cp\u003eThis spares you exactly the step most people dread: aligning the nude Shibata stylus with millimetre precision. For a cartridge of this class, that's not a comfort gimmick – it spares you the worry that a boron cantilever might get damaged during mounting.\u003c\/p\u003e\n\u003ch2\u003eWhy the 2M Black LVB 250 Premounted?\u003c\/h2\u003e\n\u003cp\u003eAt its core is the LVB 250 technology of the Black series: a nude Shibata stylus on a boron cantilever, combined with optimised damping. The result is a fine detail resolution that usually only starts with considerably more expensive MC cartridges – just with the uncomplicated nature of an MM cartridge. Premounted means: this resolution is available to you without any setup jitters.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003ePlayback with a lot of calm and clarity. High frequencies resolve cleanly without turning harsh, voices stand out vividly in the room, and even densely arranged passages stay organised. The headshell is precisely pre-aligned – you only need to do the fine-tuning on your tonearm.\u003c\/p\u003e\n\u003ch3\u003eWho is the 2M Black LVB 250 Premounted for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eIdeal if you have a tonearm with a bayonet connection (SME standard) and want a top-tier cartridge without adjusting it yourself with a magnifying glass. \u003cstrong\u003eBottom line:\u003c\/strong\u003e If your tonearm has a fixed headshell, the Premounted version won't help you – then the regular 2M Black LVB 250 is the right choice. And anyone planning DJ scratching is barking up the wrong tree with a Shibata stylus anyway.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe 2M Black LVB 250 Premounted brings one of the best MM cartridges on the market into a ready-to-use form – sonically the same cartridge that won the EISA Award \"Best Phono Cartridge 2021-2022\" as the 2M Black LVB 250. Anyone who wants the Black LVB sound quality without a test of patience over alignment gets exactly that here.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCartridge type: MM (Moving Magnet), premounted on Ortofon headshell\u003c\/li\u003e\n\u003cli\u003eEdition: Ludwig van Beethoven 250 (limited)\u003c\/li\u003e\n\u003cli\u003eStylus tip: Shibata, nude\u003c\/li\u003e\n\u003cli\u003eCantilever: boron\u003c\/li\u003e\n\u003cli\u003eTip radius: r\/R 6\/50 µm\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 5 mV (1 kHz, 5 cm\/s)\u003c\/li\u003e\n\u003cli\u003eChannel separation: 27 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003eStylus compliance: 22 µm\/mN\u003c\/li\u003e\n\u003cli\u003eRecommended tracking force: 1.6 g (1.5–1.7 g)\u003c\/li\u003e\n\u003cli\u003eRecommended load: 47 kOhm · 150–300 pF\u003c\/li\u003e\n\u003cli\u003eMounting: bayonet\/SME headshell connection\u003c\/li\u003e\n\u003cli\u003eCartridge weight: 7.2 g (plus headshell)\u003c\/li\u003e\n\u003cli\u003eReplacement stylus: Stylus 2M Black LVB 250\u003c\/li\u003e\n\u003cli\u003eIncluded: cartridge premounted on Ortofon headshell, stylus brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the 2M Black LVB 250 fit every turntable?\u003c\/h3\u003e\n\u003cp\u003eAny turntable with a tonearm for bayonet\/SME headshells. What matters is that your arm has the effective mass to properly control the medium stylus compliance. If in doubt, just get in touch – we'll match it to your turntable.\u003c\/p\u003e\n\u003ch3\u003eWhat's the advantage of the premounted version?\u003c\/h3\u003e\n\u003cp\u003eYou don't have to mount and align the delicate Shibata stylus on the boron cantilever yourself – the ready-made unit clicks into your tonearm via the bayonet mount. That reduces the risk of damaging the delicate cantilever during installation. And with several headshells, you switch between cartridges in seconds.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the 2M Black LVB 250 Premounted at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just sell cartridges like this – we've been mounting and calibrating them ourselves for decades. We'll tell you honestly whether the Premounted version suits your tonearm or whether you'd be better off with something else. As an authorised Ortofon dealer, we handle the warranty properly, and our technician Mauri helps with installation and alignment.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e a clean \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e, the right \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, or a look at our other \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":52989545218384,"sku":"303413","price":1109.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/ortofon-2m-black-lvb-250-premounted-tonabnehmer-sh4-headshell-perspektive-links.png?v=1786635207"},{"product_id":"ortofon-2mr-black-lvb-250-tonabnehmer","title":"Ortofon 2MR black LVB 250 (Rega, Shibata\/Boron)","description":"\u003cp\u003eThe Ortofon 2MR black LVB 250 is a moving magnet cartridge from the Beethoven anniversary edition, whose housing is designed for the three-point mounting of Rega tonearms. It combines the nude Shibata stylus on a boron cantilever with the narrow 6-gram body made specifically for Rega.\u003c\/p\u003e\n\u003cp\u003eIt's the strongest thing the 2MR range has to offer: the flagship LVB 250 technology of the Black series, purpose-built for a Rega turntable – with no spacer fiddling.\u003c\/p\u003e\n\u003ch2\u003eWhy the 2MR black LVB 250?\u003c\/h2\u003e\n\u003cp\u003eThe boron cantilever is stiffer and lighter than aluminium and guides the Shibata stylus more precisely through the groove. Combined with the LVB 250 edition's optimised damping, that produces a fine resolution and calm that reach into MC territory – here in the uncomplicated MM form and purpose-built for a Rega arm.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eThe highest-quality reproduction you'll get on a Rega with a 2M-based cartridge: extremely fine treble, deep spatial layering, and confident tracking even in the trickiest passages. A limited edition that lives up to its claim.\u003c\/p\u003e\n\u003ch3\u003eWho is the 2MR black LVB 250 for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eFor discerning Rega owners with a high-resolution system who want the very best. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e on a simple chain, the budget is better spent on the amplifier or speakers – this cartridge wants an equally capable environment. And without a Rega turntable, you don't need the 2MR body.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe 2MR black LVB 250 is the flagship cartridge for Rega owners who don't compromise – boron, Shibata, a perfect mounting fit. At its core is the same cartridge that, as the 2M Black LVB 250, won the EISA Award \"Best Phono Cartridge 2021-2022\", here fitted perfectly into the Rega body. Anyone who wants the best 2MR reproduction has found it here.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: MM cartridge (moving magnet), for Rega tonearms\u003c\/li\u003e\n\u003cli\u003eSeries: 2MR black LVB 250 (Ludwig van Beethoven edition)\u003c\/li\u003e\n\u003cli\u003eStylus profile: nude Shibata\u003c\/li\u003e\n\u003cli\u003eCantilever: boron\u003c\/li\u003e\n\u003cli\u003eTip radius r\/R: 6\/50 µm\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 5 mV\u003c\/li\u003e\n\u003cli\u003eChannel separation: 27 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003eStylus compliance: 22 µm\/mN\u003c\/li\u003e\n\u003cli\u003eRecommended tracking force: 1.6 g (1.5–1.7 g)\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 47 kOhm\u003c\/li\u003e\n\u003cli\u003eLoad capacitance: 150–300 pF\u003c\/li\u003e\n\u003cli\u003eMounting: Rega three-point mounting, no spacer\u003c\/li\u003e\n\u003cli\u003eWeight: 6 g\u003c\/li\u003e\n\u003cli\u003eWhat's included: cartridge, stylus brush, screwdriver, mounting screws (Rega three-point mounting)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the boron cantilever give over the standard 2MR black?\u003c\/h3\u003e\n\u003cp\u003eThe stiffer, lighter boron cantilever transfers the finest groove information with less loss than aluminium – you hear that as more calm, finer detail and deeper layering. On a correspondingly resolving system, the difference is clear; on a simpler one, smaller. We'll give you an honest read for your specific system on whether the edition is worth it.\u003c\/p\u003e\n\u003ch3\u003eWhat's special about the LVB 250 edition?\u003c\/h3\u003e\n\u003cp\u003eIt's Ortofon's tribute to Beethoven's 250th birthday and combines the Black series' flagship technology – nude Shibata on a boron cantilever, optimised damping – in a limited run. Sonically it reaches into MC territory, but remains uncomplicated MM technology with a 47 kOhm input. In the 2MR body, it all sits perfectly and spacer-free on a Rega arm.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the 2MR black LVB 250 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a cartridge of this class deserves advice and careful alignment – you get both from us. We'll tell you honestly whether your system does the cartridge justice, set it up perfectly on your Rega, and as an authorised Ortofon dealer in Wädenswil handle the warranty correctly. At HD Zürisee, the result is what counts.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e a first-class \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e, a high-quality \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e or more \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e from the range.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":52989547544912,"sku":"303554","price":1049.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/ortofon-2mr-black-lvb-250-tonabnehmer-perspektive-links.png?v=1786630122"},{"product_id":"technicssl1210gme","title":"Technics SL-1210GME Master Edition Turntable","description":"\u003cp\u003eThe Technics SL-1210GME Master Edition is a high-end direct-drive turntable and the final evolution of the SL-1200G line, limited to 1,210 units worldwide. Because supplier parts are being discontinued, Technics is ending production of the SL-1200G\/1210G after more than 50 years – no successor for this top-tier line has been announced, while the regular SL-1200 models such as the SL-1200GR2 continue independently of this. Anyone who misses the 1210GME misses the final evolution of this flagship class, which has shaped DJ booths and living rooms alike since the seventies.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the SL-1210GME?\u003c\/h2\u003e\n\u003cp\u003eAt its core works a coreless dual-rotor direct-drive motor that structurally eliminates the dreaded cogging. The ΔΣ-Drive control smooths out the last micro-fluctuations in speed before they even become audible – the result is a wow and flutter of 0.025% WRMS, a value that only significantly more expensive decks can otherwise match. If you thought until now that a direct drive is only good for DJing, you simply haven't heard this one yet.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the Master Edition offers over the standard SL-1210G\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance – what you get more with the Master Edition:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eΔΣ-Drive motor control – not present on the standard SL-1210G\u003c\/li\u003e\n\u003cli\u003eReinforced stator board with non-magnetic screws – less motor vibration\u003c\/li\u003e\n\u003cli\u003eNew power supply modelled on the SL-1000R – over 100 kHz, active noise cancellation\u003c\/li\u003e\n\u003cli\u003eGold details and numbered Master Edition plaque\u003c\/li\u003e\n\u003cli\u003eLimited to 1,210 units (black) or 1,200 units (silver), no re-run\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe chassis, platter and basic tonearm construction of the proven G platform remain unchanged.\u003c\/p\u003e\n\u003cp\u003ePlain talk up front: the chassis, platter and basic tonearm construction come from the proven G platform – nobody needs to reinvent those. The difference lies where speed and power are created. The standard SL-1210G lacks the ΔΣ-Drive motor control; the Master Edition is the first model of the G line to have it on board. It feeds the coreless dual-rotor motor with a particularly clean sine signal and so reduces motor vibration. In addition there is a reinforced stator board with non-magnetic screws and a new multi-stage switch-mode power supply modelled on the SL-1000R reference deck, which operates at over 100 kHz and actively suppresses residual noise.\u003c\/p\u003e\n\u003cp\u003eYou can see the details: gold-lacquered tonearm, gold-coloured logos on the headshell, top plate and dust cover, plus the Master Edition plaque with serial number. Even the packaging comes without polystyrene. And then there is the quantity: the standard G series is being phased out, and the Master Edition exists worldwide in only 1,210 units in black and 1,200 in silver, with no re-run. Limited editions have traditionally been sought after by collectors – nobody can guarantee a rise in value, but a supply that is finite speaks for itself.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear \/ get \/ experience\u003c\/h2\u003e\n\u003cp\u003eThe gold-lacquered magnesium tonearm brings low self-mass and high rigidity – exactly the combination that fine-tracing cartridges demand. The four-layer chassis construction and the αGEL damping feet keep footfall noise and cabinet resonances away, so the stylus only tracks the groove and not the living-room floor. Add to that the numbered Master Edition plaque in deep black with gold accents – a collector's piece you recognise at a glance even from the outside.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the SL-1210GME suited for? (and who it isn't)\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the SL-1210GME is meant for connoisseurs who know they're buying an audiophile reference deck AND a collector's piece – not for anyone who just wants to quickly put on a record. A cartridge is deliberately not included – you choose one yourself, matched to your ear and your budget (we're happy to advise you on that). If you only listen to vinyl occasionally and have no fondness for limited editions, a model from the regular SL-1200GR2 line is the better value – it plays in a technically similar league, just without the gold accents and without the unit limit.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eBetween \"good\" and \"that's it, this form factor can't go any further\" apparently lies exactly one Master Edition update, as far as Technics is concerned. The SL-1210GME isn't a facelift, but the deliberate final word on one of the most influential turntable lines ever – and HD Zürisee in Wädenswil has secured a share of the last worldwide units before they're gone for good.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDrive principle:\u003c\/strong\u003e direct drive, coreless dual-rotor DC motor with ΔΣ-Drive control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e multi-stage, low-noise switch-mode power supply (over 100 kHz) with active noise cancellation, derived from the SL-1000R\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter speeds:\u003c\/strong\u003e 33-1\/3, 45, 78 rpm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWow and flutter:\u003c\/strong\u003e 0.025% WRMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter:\u003c\/strong\u003e 3-layer (brass, die-cast aluminium, damping rubber), Ø 332 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter weight (approx.):\u003c\/strong\u003e 3.6 kg incl. rubber mat\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTonearm type:\u003c\/strong\u003e universal, statically balanced, S-shaped\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTonearm material:\u003c\/strong\u003e magnesium, gold-lacquered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEffective tonearm length:\u003c\/strong\u003e 230 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOverhang:\u003c\/strong\u003e 15 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChassis construction:\u003c\/strong\u003e 4-layer (aluminium top plate, die-cast aluminium, BMC, heavyweight rubber)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e silicone damping feet with αGEL\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 453 × 173 × 372 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight (approx.):\u003c\/strong\u003e 18.0 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour \/ special feature:\u003c\/strong\u003e black housing, numbered Master Edition plaque, limited worldwide to 1,210 units\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e turntable, rubber mat, dust cover with gold-coloured Technics logo, EP adapter, counterweight, 2 additional weights, headshell with gold-coloured logo, overhang gauge, screw and spacer set for cartridges, phono cable, phono ground cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the SL-1210GME come with a cartridge?\u003c\/strong\u003e\u003cbr\u003eNo, the SL-1210GME is deliberately supplied without a cartridge. The universal tonearm and headshell fit practically any common MM or MC system. That way you choose the system that suits your musical taste and budget, instead of taking on a fixed compromise. We're happy to advise you when choosing from our range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat distinguishes the SL-1210GME from the standard SL-1210G?\u003c\/strong\u003e\u003cbr\u003eThe Master Edition has ΔΣ-Drive motor control, a reinforced stator board and a new power supply derived from the SL-1000R reference deck – none of which the standard SL-1210G has. Chassis, platter and tonearm base are the same. On top come gold details, a serial number and the limit of 1,210 units, while the standard G series is being phased out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many SL-1210GME units exist worldwide?\u003c\/strong\u003e\u003cbr\u003eTechnics has limited production worldwide to 1,210 numbered units, identifiable by the gold plaque on the housing. Once this number is sold, there's no re-run – unlike regular models, there's no second batch here. We only carry our last, already secured remaining units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill there be a new SL-1200 model after the Master Edition?\u003c\/strong\u003e\u003cbr\u003eNot for the SL-1200G line itself: with the Master Edition, Technics is ending its production after more than 50 years, and no successor has been announced. The SL-1200 series as a whole continues, though – models like the current SL-1200GR2 keep being produced unchanged, independently of this. If you specifically want this G line with the Master Edition plaque, you need it now – a reissue isn't in sight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I also need a phono preamp?\u003c\/strong\u003e\u003cbr\u003eYes, unless your amplifier has its own phono input. The SL-1210GME delivers a pure, unamplified phono signal straight from the cartridge. We're happy to recommend a suitable phono stage for MM or MC systems, matched to your chosen cartridge and the rest of your system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the SL-1210GME intended more for the DJ booth or the listening room?\u003c\/strong\u003e\u003cbr\u003eBoth are possible – the black housing and the pitch fader deliberately recall the DJ roots of the series. Sonically and in build quality, though, the Master Edition is clearly designed for audiophile music lovers, less for rough club everyday use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Technics SL-1210GME at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eWe've specialised in hi-fi and high-end since 1997 and have known the SL-1200 line for decades from our own experience. With such a limited piece, we're happy to advise you on cartridge, phono stage and placement, so the fine piece shows its full potential right from the start.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA deck of this class deserves an equally worthy cartridge – browse our \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e or let us advise you on a matching \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e. For a low-resonance, stable setup, it's also worth a look at our \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003ehi-fi furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"Technics","offers":[{"title":"Default Title","offer_id":52989572251984,"sku":null,"price":5499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/technics-sl-1210gme-master-edition-plattenspieler-frontansicht.jpg?v=1789035719"},{"product_id":"technics-sl-1200gme-master-edition","title":"Technics SL-1200GME Master Edition Turntable","description":"\u003cp\u003eThe Technics SL-1200GME Master Edition is a high-end direct-drive turntable and the final evolution of the SL-1200G line, limited to 1,200 units worldwide. Because supplier parts are being discontinued, Technics is ending production of the SL-1200G\/1210G after more than 50 years – no successor for this top-tier line has been announced, while the regular SL-1200 models such as the SL-1200GR2 continue independently of this. Anyone who misses the 1200GME misses the final evolution of this flagship class, which has shaped DJ booths and living rooms alike since the seventies.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the SL-1200GME?\u003c\/h2\u003e\n\u003cp\u003eAt its core works a coreless dual-rotor direct-drive motor that structurally eliminates the dreaded cogging. The ΔΣ-Drive control smooths out the last micro-fluctuations in speed before they even become audible – the result is a wow and flutter of 0.025% WRMS, a value that only significantly more expensive decks can otherwise match. If you thought until now that a direct drive is only good for DJing, you simply haven't heard this one yet.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the Master Edition offers over the standard SL-1200G\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance – what you get more with the Master Edition:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eΔΣ-Drive motor control – not present on the standard SL-1200G\u003c\/li\u003e\n\u003cli\u003eReinforced stator board with non-magnetic screws – less motor vibration\u003c\/li\u003e\n\u003cli\u003eNew power supply modelled on the SL-1000R – over 100 kHz, active noise cancellation\u003c\/li\u003e\n\u003cli\u003eGold details and numbered Master Edition plaque\u003c\/li\u003e\n\u003cli\u003eLimited to 1,200 units (silver) or 1,210 units (black), no re-run\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe chassis, platter and basic tonearm construction of the proven G platform remain unchanged.\u003c\/p\u003e\n\u003cp\u003ePlain talk up front: the chassis, platter and basic tonearm construction come from the proven G platform – nobody needs to reinvent those. The difference lies where speed and power are created. The standard SL-1200G lacks the ΔΣ-Drive motor control; the Master Edition is the first model of the G line to have it on board. It feeds the coreless dual-rotor motor with a particularly clean sine signal and so reduces motor vibration. In addition there is a reinforced stator board with non-magnetic screws and a new multi-stage switch-mode power supply modelled on the SL-1000R reference deck, which operates at over 100 kHz and actively suppresses residual noise.\u003c\/p\u003e\n\u003cp\u003eYou can see the details: gold-lacquered tonearm, gold-coloured logos on the headshell, top plate and dust cover, plus the Master Edition plaque with serial number. Even the packaging comes without polystyrene. And then there is the quantity: the standard G series is being phased out, and the Master Edition exists worldwide in only 1,200 units in silver and 1,210 in black, with no re-run. Limited editions have traditionally been sought after by collectors – nobody can guarantee a rise in value, but a supply that is finite speaks for itself.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear \/ get \/ experience\u003c\/h2\u003e\n\u003cp\u003eThe gold-lacquered magnesium tonearm brings low self-mass and high rigidity – exactly the combination that fine-tracing cartridges demand. The four-layer chassis construction and the αGEL damping feet keep footfall noise and cabinet resonances away, so the stylus only tracks the groove and not the living-room floor. Add to that the numbered Master Edition plaque in elegant silver with gold accents – a collector's piece you recognise at a glance even from the outside.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the SL-1200GME suited for? (and who it isn't)\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the SL-1200GME is meant for connoisseurs who know they're buying an audiophile reference deck AND a collector's piece – not for anyone who just wants to quickly put on a record. A cartridge is deliberately not included – you choose one yourself, matched to your ear and your budget (we're happy to advise you on that). If you only listen to vinyl occasionally and have no fondness for limited editions, a model from the regular SL-1200GR2 line is the better value – it plays in a technically similar league, just without the gold accents and without the unit limit.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eBetween \"good\" and \"that's it, this form factor can't go any further\" apparently lies exactly one Master Edition update, as far as Technics is concerned. The SL-1200GME isn't a facelift, but the deliberate final word on one of the most influential turntable lines ever – and HD Zürisee in Wädenswil has secured a share of the last worldwide units before they're gone for good.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDrive principle:\u003c\/strong\u003e direct drive, coreless dual-rotor DC motor with ΔΣ-Drive control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e multi-stage, low-noise switch-mode power supply (over 100 kHz) with active noise cancellation, derived from the SL-1000R\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter speeds:\u003c\/strong\u003e 33-1\/3, 45, 78 rpm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWow and flutter:\u003c\/strong\u003e 0.025% WRMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter:\u003c\/strong\u003e 3-layer (brass, die-cast aluminium, damping rubber), Ø 332 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatter weight (approx.):\u003c\/strong\u003e 3.6 kg incl. rubber mat\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTonearm type:\u003c\/strong\u003e universal, statically balanced, S-shaped\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTonearm material:\u003c\/strong\u003e magnesium, gold-lacquered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEffective tonearm length:\u003c\/strong\u003e 230 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOverhang:\u003c\/strong\u003e 15 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChassis construction:\u003c\/strong\u003e 4-layer (aluminium top plate, die-cast aluminium, BMC, heavyweight rubber)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e silicone damping feet with αGEL\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 453 × 173 × 372 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight (approx.):\u003c\/strong\u003e 18.0 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour \/ special feature:\u003c\/strong\u003e silver housing, numbered Master Edition plaque, limited worldwide to 1,200 units\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e turntable, rubber mat, dust cover with gold-coloured Technics logo, EP adapter, counterweight, 2 additional weights, headshell with gold-coloured logo, overhang gauge, screw and spacer set for cartridges, phono cable, phono ground cable, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the SL-1200GME come with a cartridge?\u003c\/strong\u003e\u003cbr\u003eNo, the SL-1200GME is deliberately supplied without a cartridge. The universal tonearm and headshell fit practically any common MM or MC system. That way you choose the system that suits your musical taste and budget, instead of taking on a fixed compromise. We're happy to advise you when choosing from our range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat distinguishes the SL-1200GME from the standard SL-1200G?\u003c\/strong\u003e\u003cbr\u003eThe Master Edition has ΔΣ-Drive motor control, a reinforced stator board and a new power supply derived from the SL-1000R reference deck – none of which the standard SL-1200G has. Chassis, platter and tonearm base are the same. On top come gold details, a serial number and the limit of 1,200 units, while the standard G series is being phased out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many SL-1200GME units exist worldwide?\u003c\/strong\u003e\u003cbr\u003eTechnics has limited production worldwide to 1,200 numbered units, identifiable by the gold plaque on the housing. Once this number is sold, there's no re-run – unlike regular models, there's no second batch here. We only carry our last, already secured remaining units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill there be a new SL-1200 model after the Master Edition?\u003c\/strong\u003e\u003cbr\u003eNot for the SL-1200G line itself: with the Master Edition, Technics is ending its production after more than 50 years, and no successor has been announced. The SL-1200 series as a whole continues, though – models like the current SL-1200GR2 keep being produced unchanged, independently of this. If you specifically want this G line with the Master Edition plaque, you need it now – a reissue isn't in sight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I also need a phono preamp?\u003c\/strong\u003e\u003cbr\u003eYes, unless your amplifier has its own phono input. The SL-1200GME delivers a pure, unamplified phono signal straight from the cartridge. We're happy to recommend a suitable phono stage for MM or MC systems, matched to your chosen cartridge and the rest of your system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the SL-1200GME intended more for the DJ booth or the listening room?\u003c\/strong\u003e\u003cbr\u003eBoth are possible – the silver housing and the pitch fader deliberately recall the DJ roots of the series. Sonically and in build quality, though, the Master Edition is clearly designed for audiophile music lovers, less for rough club everyday use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Technics SL-1200GME at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eWe've specialised in hi-fi and high-end since 1997 and have known the SL-1200 line for decades from our own experience. With such a limited piece, we're happy to advise you on cartridge, phono stage and placement, so the fine piece shows its full potential right from the start.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA deck of this class deserves an equally worthy cartridge – browse our \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e or let us advise you on a matching \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e. For a low-resonance, stable setup, it's also worth a look at our \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003ehi-fi furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"Technics","offers":[{"title":"Default Title","offer_id":53578206052688,"sku":null,"price":5499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/technics-sl-1200gme-master-edition-plattenspieler-schraegansicht.jpg?v=1789034159"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/limited-edition.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}