{"title":"LAVARDIN","description":"\u003cp\u003eLavardin is a French manufacturer of purely analogue amplifier electronics that has relied since the 1990s on a single, patented idea: the Memory-Free circuit, which minimises memory effects in transistor circuits and thereby preserves musical detail that gets lost in conventional circuits.\u003c\/p\u003e\n\n\u003cp\u003eThe range is clearly structured: if you're after an all-in-one solution, you'll find it in the \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e ISx, ISx Reference, ITx and ITx 20. If you're building a separate chain or already own a preamp, you combine the CX42 preamplifier with one of the \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifiers\u003c\/a\u003e – from the compact A80 through the powerful AP150 to the MAP and MAP-20 monoblock power amps. Add to that the CM-R 250, a dedicated power cable for the final fine-tuning of your power supply.\u003c\/p\u003e\n\n\u003cp\u003eTypical questions when comparing brands: is an integrated amp enough, or does a separate pre\/power combination pay off? And how much difference does the Reference version really make? The most honest answer comes from a direct comparison – we advise you at HD Zürisee in Wädenswil on which combination suits your speakers, your room and your budget, without selling you more device than you need.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat makes Lavardin amplifiers special?\u003c\/h3\u003e\n\u003cp\u003eThe patented Memory-Free circuit is designed to minimise memory effects in transistor circuits that would otherwise swallow fine musical detail. The result is a warm, effortless sound character that's closer to a good tube amplifier than to conventional solid-state technology.\u003c\/p\u003e\n\u003ch3\u003eIntegrated amplifier or separate pre\/power combination?\u003c\/h3\u003e\n\u003cp\u003eAn integrated amplifier such as the ISx or ITx is entirely sufficient for most systems and is the more compact, more affordable solution. A separate combination of the CX42 and a Lavardin power amp pays off above all if you want to upgrade in stages or want maximum channel separation.\u003c\/p\u003e\n\u003ch3\u003eWhy buy Lavardin at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe listen together with you to work out which Lavardin model fits your existing chain, instead of simply recommending the most expensive device. Call us, write via WhatsApp, or drop by at our place in Wädenswil.\u003c\/p\u003e","products":[{"product_id":"lavardin-isx-vollverstaerker","title":"Lavardin ISx Integrated Amplifier from France","description":"\u003cp\u003eThe Lavardin ISx is a fully analogue integrated amplifier from France built around the manufacturer's patented Memory-Free circuit. No DAC, no streaming, no display – instead, a circuit concept that has barely changed in over two decades, simply because it works.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the ISx?\u003c\/h2\u003e\n\u003cp\u003eMost amplifiers look similar on paper – power, distortion, damping factor. Lavardin deliberately ignores this numbers game and focuses on a problem hardly any datasheet captures: memory effects in transistor circuits that swallow fine musical detail. The result is a 2×50-watt amplifier that \"disappears\" more calmly than its wattage would suggest – and precisely because of that, it's been one of the most underrated amplifiers in its price class for years.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe ISx plays fast, effortless, and with a naturalness usually attributed to pricier tube amplifiers – just without their compromises in control and bass. Voices stay tangible, cymbals don't fray into noise, and the music keeps its dynamics even at moderate room volume. If you've only known bright, clinical transistor amplifiers so far, this will make you pause: this is supposed to be solid-state technology?\u003c\/p\u003e\n\n\u003ch3\u003eWho is the ISx for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants to build a compact, uncomplicated stereo system with a turntable, CD player, or streaming preamp, and values musicality over feature lists. Straight talk: if you need network streaming, a remote control out of the box, or a built-in headphone output, you'll have to retrofit or choose a different model – in its base configuration, the ISx stays deliberately purist.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe ISx isn't an amplifier that boasts about wattage. It's the kind you buy, set up – and then forget about for ten years, because it just plays. Which, with respect, makes it one of the most honest integrated amplifiers currently passing through our shop.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 50 W RMS at 8 Ω, max. 2× 104 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInputs: 4× RCA, gold-plated, input sensitivity 330 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eDistortion (THD): 0.005% at full power\u003c\/li\u003e\n\u003cli\u003ePower consumption: 32 W in standby, max. 180 W\u003c\/li\u003e\n\u003cli\u003eOptions: MM phono input, bypass input for AV preamp, volume remote control\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 80 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow much power does the Lavardin ISx deliver?\u003c\/h3\u003e\n\u003cp\u003e2× 50 watts at 8 ohms, up to 2× 104 watts at 2 ohms. That's easily enough for most bookshelf and compact floorstanding speakers – but with the ISx, how stably it controls even demanding impedance curves matters more than raw wattage.\u003c\/p\u003e\n\u003ch3\u003eDoes the ISx have a phono input for a turntable?\u003c\/h3\u003e\n\u003cp\u003eNot from the factory, but as a factory option for an extra charge: an MM phono module can be permanently fitted. If you already know at the time of purchase that vinyl will be part of the picture, order the option right away – retrofitting later is possible, but more involved.\u003c\/p\u003e\n\u003ch3\u003eCan I combine the ISx with a streamer or DAC?\u003c\/h3\u003e\n\u003cp\u003eYes, via one of the four RCA inputs or the optional bypass input, which is designed for connecting an external preamp or an AV processor with fixed gain. The ISx itself remains purely analogue, handling only the amplification, not the signal source.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin ISx from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe carry Lavardin because we like amplifiers that sound like music, not like a datasheet – and because we'll tell you honestly whether it suits your speakers and your room. Call us, drop us a line, or come by for a coffee, and let's talk about your system.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching turntable or pairing with our \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e gets a lot out of the ISx; for that last bit of fine-tuning, it's worth a look at our \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cables\u003c\/a\u003e selection.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534070866256,"sku":null,"price":2410.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-isx-vollverstaerker-frontansicht.jpg?v=1788959076"},{"product_id":"lavardin-isx-reference-vollverstaerker","title":"Lavardin ISx Reference Integrated Amplifier France","description":"\u003cp\u003eThe Lavardin ISx Reference is the refined evolution of the ISx – a fully analogue integrated amplifier from France with a reworked power supply and refined Memory-Free circuitry. The power stays the same, the resolution doesn't.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the ISx Reference?\u003c\/h2\u003e\n\u003cp\u003eFor its Reference models, Lavardin doesn't take the usual route of more watts, but of better components and a quieter power supply. For the ISx Reference that means: the same 2×50 watts as the base model, but a power supply and circuit layout that gives the Memory-Free technology more room to breathe. If you already know and like the ISx, you get the same basic character here – just with noticeably more resolution in the quiet passages.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eCompared with the ISx, the soundstage feels wider, details stand out more sharply without sounding analytical, and the micro-dynamics – the fine volume fluctuations within a single note – gain resolution. The overall character stays neutral and undramatic: no tube warmth, but no transistor harshness either. Exactly the balance Lavardin has pursued for years.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the ISx Reference for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor listeners who already like the ISx but want a bit more refinement from their chain without changing the wattage or the format. Plain talk: if you can't or don't want to hear the difference to the ISx in a direct comparison, you're better off saving the extra cost – the base version is already remarkably musical.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn amplifier for customers who know what they want: the same Lavardin philosophy, just with the handbrake released a notch. Not a must-have, but an honest, comprehensible step up – and with the optional red front panel, a small visual statement too.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 50 W RMS at 8 Ω, max. 2× 104 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInputs: 4× RCA, gold-plated, input sensitivity 330 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.005% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 32 W in standby, max. 180 W\u003c\/li\u003e\n\u003cli\u003eOptions: MM phono input, bypass input for AV preamp, remote volume control, red front panel at no extra cost\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 80 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets the ISx Reference apart from the standard ISx?\u003c\/h3\u003e\n\u003cp\u003eNot the power – that stays identical at 2× 50 watts – but the power supply and circuit details. The Reference resolves more finely, sounds a touch wider in the soundstage, and feels more mature in the micro-dynamics, while keeping the same neutral basic character as the ISx.\u003c\/p\u003e\n\u003ch3\u003eIs the ISx Reference also available in red?\u003c\/h3\u003e\n\u003cp\u003eYes, the red front panel is a free factory option on the Reference model over the standard black finish. Both versions are technically identical, the colour is purely a matter of taste – just let us know your preference when ordering and we'll build it accordingly for you.\u003c\/p\u003e\n\u003ch3\u003eIs the extra cost over the ISx worth it?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the rest of your chain. On high-resolution speakers in a quiet listening environment, the difference is clearly audible; on simpler chains, less so. The most honest way to judge is a direct comparison at our place.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin ISx Reference at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe know the whole ISx range from our own experience and will tell you honestly whether the extra cost of the Reference version is worth it for your system. Get in touch by phone, WhatsApp or email, and we'll talk about your speakers and your room.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eHigh-resolution \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e suit the ISx Reference just as well as compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e; for the power supply it's worth a look at our \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cable\u003c\/a\u003e range.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534071947600,"sku":null,"price":3661.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-isx-reference-vollverstaerker-frontansicht.jpg?v=1788959076"},{"product_id":"lavardin-itx-vollverstaerker","title":"Lavardin ITx Integrated Amplifier Flagship France","description":"\u003cp\u003eThe Lavardin ITx is the purist flagship among the manufacturer's integrated amplifiers – a fully analogue unit with no phono input, no remote control from the factory, and no frills, built after more than twelve years of development work on the Memory-Free circuit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the ITx?\u003c\/h2\u003e\n\u003cp\u003eWith the ITx, Lavardin deliberately leaves out everything that could get in the way of a pure signal path: no tone controls, no tape monitor, no phono module. Four RCA inputs, one volume control, done. This reduction isn't a cost-cutting measure but the result of years of listening sessions by the developers – in their philosophy, every extra component in the signal path costs a piece of musicality. In the trade press, the ITx has regularly been regarded as the reference for \"a cable with gain\" since its introduction.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eWith 2× 55 watts at 8 ohms (up to 2× 110 watts at 2 ohms), the ITx drives even more demanding speakers with authority, without ever sounding loud or aggressive. What stands out above all is the timing: rhythmically complex music stays comprehensible down to the last detail, without the amplifier sounding \"hard\" or analytical. The bass is dry and controlled, without being pushed to the fore.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the ITx for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor music lovers who want an uncompromising, purely analogue signal path and already have their own separate sources (streamer, DAC, CD player). Plain talk: without a phono input and without a remote control from the factory, the ITx isn't for anyone looking for an all-in-one solution – Lavardin offers more convenient models like the ISx for that.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe ITx is an amplifier for people who know what they don't want: compromises in the signal path. If you're prepared to do without convenience features, you get one of the most honest presentations we know in this price class in return.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 55 W RMS at 8 Ω, max. 2× 110 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInputs: 4× RCA, gold-plated, input sensitivity 330 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput: tape output at fixed level\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.001% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 35 W in standby, max. 400 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Lavardin ITx have a phono input?\u003c\/h3\u003e\n\u003cp\u003eNo, the ITx is designed as a pure line-level device and deliberately built without a phono stage. If you want to play vinyl, you need an external phono preamp ahead of one of the four RCA inputs – that way the ITx's short, uncompromising signal path stays intact.\u003c\/p\u003e\n\u003ch3\u003eIs there a remote control for the ITx?\u003c\/h3\u003e\n\u003cp\u003eNot from the factory – the ITx is operated manually on the unit. This is a deliberate choice to keep the signal path as short as possible and avoid every extra component. If you need convenience features like a remote control, the ISx is the better choice.\u003c\/p\u003e\n\u003ch3\u003eHow much power does the ITx really deliver into difficult speakers?\u003c\/h3\u003e\n\u003cp\u003e2× 55 watts at 8 ohms and up to 2× 110 watts at 2 ohms show that the ITx stays stable even as impedance drops. In practice this is enough for the vast majority of high-quality floorstanding and bookshelf speakers.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin ITx at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eThe ITx isn't a device you order unheard – we'll advise you on which sources and speakers really suit this purist amplifier. Call us, message us or drop by, we'll take the time for your system.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFull-grown \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and a high-quality \u003ca href=\"\/en\/collections\/vorverstarker\"\u003epreamp\u003c\/a\u003e upstream suit the ITx well, provided you're using digital sources with their own volume control.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534072504656,"sku":null,"price":6600.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-itx-vollverstaerker-frontansicht.jpg?v=1788959076"},{"product_id":"lavardin-itx-20-vollverstaerker","title":"Lavardin ITx 20 Integrated Amplifier Anniversary Edition","description":"\u003cp\u003eThe Lavardin ITx 20 is the anniversary-revised version of the ITx flagship – a fully analogue integrated amplifier with the same purist concept, but refined circuitry from a further ten years of development work on the Memory-Free technology.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the ITx 20?\u003c\/h2\u003e\n\u003cp\u003eTo mark a round anniversary of the original IT model, Lavardin has kept refining the circuit and components over all these years. The ITx 20 takes over the format, power and basic philosophy of the ITx one-to-one, but brings a matured version of the Memory-Free circuit that the manufacturer describes as the most transparent implementation of its technology so far.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eCompared with the ITx, the ITx 20 feels a touch calmer and more resolved in the quiet passages, without losing the wiry, immediate character of the range. The micro-dynamics – small volume fluctuations within a single note – are, according to the manufacturer, reproduced with particular clarity, giving voices and acoustic instruments an extra dose of liveliness.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the ITx 20 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor customers who already know the ITx and want the best out of this platform without switching format. Plain talk: if you've never heard a Lavardin, first compare the ISx or ITx – the extra cost of the ITx 20 really only makes sense after a direct A\/B comparison.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe ITx 20 is the logical peak of the ITx line: not a new concept, but an old one matured over years. If you're prepared to pay for the last few percent of resolution, you actually get more amplifier for your money here than the price list first suggests.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 55 W RMS at 8 Ω, max. 2× 110 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInputs: 4× RCA, gold-plated, input sensitivity 330 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.001% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 35 W in standby, max. 400 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets the ITx 20 apart from the ITx?\u003c\/h3\u003e\n\u003cp\u003eBoth share the format, power and basic concept. The ITx 20 brings a version of the Memory-Free circuit refined over a further ten years, which according to the manufacturer delivers more resolution and calm in quiet passages, with an unchanged, neutral tonal character.\u003c\/p\u003e\n\u003ch3\u003eIs the ITx 20 suitable as an entry point into the Lavardin range?\u003c\/h3\u003e\n\u003cp\u003eNot really as a first choice. If you don't yet know Lavardin, it's best to first listen your way through the ISx or ITx – the refinements of the ITx 20 are best judged in direct comparison with the more affordable models.\u003c\/p\u003e\n\u003ch3\u003eDoes the ITx 20 need a separate preamp?\u003c\/h3\u003e\n\u003cp\u003eNo, it's a fully-fledged integrated amplifier with four RCA inputs and its own volume control. An external preamp only makes sense if you want to bring additional sources with their own level matching, more inputs, or separate signal processing into your system.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin ITx 20 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe listen to you before recommending an amplifier in this price class – even if that sometimes means recommending the more affordable ITx first. Get in touch by phone, WhatsApp or email for an honest consultation.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe ITx 20 deserves high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and carefully chosen \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e – on request we'll put together a matching chain for you.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534080958800,"sku":null,"price":11200.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-itx-20-vollverstaerker-frontansicht.png?v=1788959077"},{"product_id":"lavardin-cx42-vorverstaerker","title":"Lavardin CX42 Analogue Preamplifier France","description":"\u003cp\u003eThe Lavardin CX42 is a purely analogue preamplifier from France with up to six high-level inputs and the manufacturer's own Memory-Free circuit. It's operated the classic way, by hand, with no display and no menus.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the CX42?\u003c\/h2\u003e\n\u003cp\u003eA preamp seemingly has the simplest job in the system: select a source, adjust the level, pass it on. For Lavardin, that's exactly where the biggest source of error lies, because every component in the signal path can introduce memory effects that swallow fine musical information. The CX42 reduces this path to a minimum of high-quality relay switches and discrete amplifier stages instead of volume-control ICs – a deliberately old-fashioned but demonstrably effective solution.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003ePaired with a Lavardin power amp like the A80 or AP150, the CX42 shows what it was built for: a calm, unstrained presentation with a lot of depth and a precision in reproducing quiet details that you wouldn't expect from such an unassuming unit. But even with third-party gear the character stays intact – the CX42 barely colours the sound, it rather makes room for what's already in the recording.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the CX42 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor anyone building a separate pre\/power combination or looking to add a high-quality, uncomplicated preamp to an existing power amp. Plain talk: if you expect balanced outputs, a display or app control, the CX42 will disappoint – here it's the signal path that counts, not the user interface.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe CX42 is the kind of unit that barely stands out in the rack, and that's exactly why it convinces: no gimmicks, just a preamp that does its job so unobtrusively that you simply forget about it after a few weeks – in the best sense.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: up to 6× RCA, gold-plated, input sensitivity 330 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput impedance: approx. 75 Ω, max. gain 12 dB \/ max. output level +20 dB\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.001% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 10 W in standby, max. 40 W\u003c\/li\u003e\n\u003cli\u003eOption: MM phono input factory-fittable on input 6\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 80 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many sources can I connect to the CX42?\u003c\/h3\u003e\n\u003cp\u003eUp to six high-level sources via gold-plated RCA inputs, selected by hand via cleanly detented relay switches. That's comfortably enough for most chains of streamer, CD player, tuner and further sources, without ever having to give up an input.\u003c\/p\u003e\n\u003ch3\u003eCan I connect a turntable to the CX42?\u003c\/h3\u003e\n\u003cp\u003eNot directly, but as a factory option an MM phono module can be permanently fitted on input 6. Alternatively you connect an external phono preamp to one of the remaining line inputs – both routes work reliably and convincingly, depending on cartridge and budget.\u003c\/p\u003e\n\u003ch3\u003eDoes the CX42 only suit Lavardin power amps?\u003c\/h3\u003e\n\u003cp\u003eNo, it works well with any power amp or integrated amplifier with a high-level input. The combination with a Lavardin power amp like the A80 or AP150 makes the most sense, though, because both share the same Memory-Free philosophy and complement each other perfectly sonically.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin CX42 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe put together a coherent pre\/power combination out of the CX42 and a matching power amp for you, instead of just selling you any model. Call us, message us on WhatsApp or drop by – we'll listen to your setup together with you.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe CX42 pairs especially well with our Lavardin \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amps\u003c\/a\u003e; for the final polish we recommend a look at our \u003ca href=\"\/en\/collections\/kabel\"\u003ecable\u003c\/a\u003e range.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534102585680,"sku":null,"price":4090.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-cx42-vorverstaerker-frontansicht.jpg?v=1788959077"},{"product_id":"lavardin-a80-endverstaerker","title":"Lavardin A80 Analogue Stereo Power Amplifier France","description":"\u003cp\u003eThe Lavardin A80 is a purely analogue stereo power amplifier from France, built on the same Memory-Free philosophy as the manufacturer's integrated amplifiers – as a partner for a separate pre\/power chain.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the A80?\u003c\/h2\u003e\n\u003cp\u003eIf you already have a preamp or want to build a separate chain, the A80 gives you access to Lavardin's circuit technology without paying for a second preamp section. The power amp is even used in a professional context: in recording studios it serves to check classical recordings, among other things on reference speakers like Spendor, Quad ESL, Harbeth, Rogers LS3\/5A, Quested and ATC – an environment where colouration would show up immediately.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe A80 transmits signals with high neutrality and a lot of fine resolution at low volumes, without ever sounding thin or lacking in power. Especially on sensitive, high-resolution speakers, it shows how cleanly it renders even complex passages instead of compressing them.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the A80 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor anyone with an existing preamp who's looking for a musical, unfussy power amp – ideal in combination with the CX42. Plain talk: as a standalone unit without a preamp, the A80 does nothing, it absolutely needs a source with its own level control ahead of it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe A80 is proof that Lavardin's philosophy isn't tied to the integrated-amplifier format. If you already own a good preamp and are looking for a power amp that doesn't push itself to the front, you'll find one of the most honest options in its price class here.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 50 W RMS at 8 Ω, max. 2× 105 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 780 mV\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.005% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 32 W in standby, max. 180 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 80 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I necessarily need a separate preamp for the A80?\u003c\/h3\u003e\n\u003cp\u003eYes, the A80 is a pure power amp with no volume control of its own. It needs a preamp or a preamp output with adjustable level ahead of it, for example the Lavardin CX42 or a preamp already present in your existing system.\u003c\/p\u003e\n\u003ch3\u003eDoes the A80 suit sensitive speakers?\u003c\/h3\u003e\n\u003cp\u003eVery well, in fact. The A80 is also used in studio environments on reference speakers like Spendor, Quad ESL or Harbeth, where colouration would show up immediately – a clear sign of its high tonal neutrality and restraint in the upper midrange.\u003c\/p\u003e\n\u003ch3\u003eHow much power does the A80 deliver into 4-ohm speakers?\u003c\/h3\u003e\n\u003cp\u003eOfficially 8 and 2 ohms are specified; at 4 ohms the power sits in between, usually closer to the 2-ohm figures. For most high-quality speakers used at home, this is more than sufficiently sized and suitable for everyday use, even with more demanding music.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin A80 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe check together with you whether your existing preamp suits the A80 before you order – that saves expensive mistakes. Contact us by phone, WhatsApp or email for a non-binding, honest assessment of your whole system.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eOur \u003ca href=\"\/en\/collections\/vorverstarker\"\u003eLavardin CX42 preamp\u003c\/a\u003e is an ideal match for the A80; for the power supply we recommend our \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cable\u003c\/a\u003e range.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534112285008,"sku":null,"price":2310.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-a80-stereo-endstufe-frontansicht.jpg?v=1788958275"},{"product_id":"lavardin-a80-reference-endverstaerker","title":"Lavardin A80 Reference Power Amplifier France","description":"\u003cp\u003eThe Lavardin A80 Reference is the refined version of the A80 power amp: same power, same format, but reworked circuitry and power supply for more resolution in the detail.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the A80 Reference?\u003c\/h2\u003e\n\u003cp\u003eAs with the ISx Reference, Lavardin doesn't go the route of more watts here either, but of finer components and a quieter power supply. If you already like the A80 but want that last bit of resolution, the Reference version gives you the same neutral basic character with more depth and finer micro-dynamics.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eCompared with the A80, the soundstage feels wider, details resolve more clearly, without the presentation sounding technical or cold. The emotional connection to the music – a core promise from Lavardin – stays intact, just with more nuance in the quiet passages.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the A80 Reference for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor anyone who already owns a high-resolution preamp and demanding speakers and wants to get the best out of this chain. Plain talk: on a simpler preamp or more affordable speakers, the added value over the standard A80 evaporates – there the base version is entirely sufficient.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA power amp for the last few percent: not a must-have, but a comprehensible step for anyone who already knows the A80 and knows what they're listening for. The most honest way to judge it is a direct comparison at our place.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 50 W RMS at 8 Ω, max. 2× 105 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 780 mV\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.005% at full output\u003c\/li\u003e\n\u003cli\u003ePower consumption: 32 W in standby, max. 180 W\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 80 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets the A80 Reference apart from the standard A80?\u003c\/h3\u003e\n\u003cp\u003eNot the power figures, which are identical, but the power supply and circuit details. The Reference resolves more finely and presents a somewhat wider, deeper soundstage, with the same neutral basic character as the standard A80 – just with more nuance.\u003c\/p\u003e\n\u003ch3\u003eDo I need a specific preamp for the A80 Reference?\u003c\/h3\u003e\n\u003cp\u003eWhat's essential is a preamp with adjustable level; technically any common one will do. But you get the biggest gain from combining it with an equally high-resolution preamp like the Lavardin CX42, so the whole chain can keep up.\u003c\/p\u003e\n\u003ch3\u003eIs the extra cost for the Reference version worth it?\u003c\/h3\u003e\n\u003cp\u003eThat depends heavily on the rest of your chain. On high-quality speakers and a finely resolving preamp, the difference is clearly audible; on simpler systems, less so. We recommend a direct comparison at our place before making your purchase decision.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin A80 Reference at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe know the whole A80 range from our own experience and give you honest advice on whether the extra cost of the Reference version is worth it in your system. Get in touch by phone, WhatsApp or email for a personal, non-binding consultation at our place in Wädenswil.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/collections\/vorverstarker\"\u003eLavardin CX42\u003c\/a\u003e makes a great preamp match for the A80 Reference; for high-resolution chains it's also worth a look at our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534112940368,"sku":null,"price":3565.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-a80-reference-endstufe-frontansicht.jpg?v=1788958275"},{"product_id":"lavardin-ap150-endverstaerker","title":"Lavardin AP150 Stereo Power Amplifier France","description":"\u003cp\u003eThe Lavardin AP150 is the pure power-amp version of the flagship ITx – same circuit technology, same chassis, but without the preamp section, for anyone who already owns a preamp or wants to build one deliberately.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the AP150?\u003c\/h2\u003e\n\u003cp\u003eWhen speaker manufacturer JMLab (today Focal) unveiled its new Utopia reference line in 2010, it chose the AP150 for the demonstration – a reference that speaks for itself. That same year, the Polish trade magazine High Fidelity honoured the AP150 with the Best Product Award 2010, and What Hi-Fi (UK) said of the pairing with the preamp in September 2010: \"If sound quality and musical enjoyment matter most, this Lavardin pairing delivers exceptional results at the price point.\"\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eWith 2× 55 watts at 8 ohms (up to 2× 110 watts at 2 ohms), the AP150 delivers noticeably more headroom than the more compact Lavardin power amps, without sacrificing fine detail. Voices remain subtly traceable, transients arrive explosively but never harshly – reviewers particularly praise the timing, which hardly any competitor in this class matches.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the AP150 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor anyone looking for a powerful yet musical power amp for a separate system with demanding speakers. Straight talk: without a matching preamp, the AP150 stays silent – plan for the CX42 or an equivalent preamp right from the start.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe AP150 shows that Lavardin's philosophy doesn't get diluted with more power. One of the most convincing power amps in its price class for anyone who doesn't want to trade off power against musicality.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 2× 55 W RMS at 8 Ω, max. 2× 110 W at 2 Ω\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 780 mV\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.001% at full power\u003c\/li\u003e\n\u003cli\u003ePower consumption: 35 W in standby, max. 400 W\u003c\/li\u003e\n\u003cli\u003eChassis: black anodised aluminium\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 430 × 135 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat was the AP150 awarded for?\u003c\/h3\u003e\n\u003cp\u003eHigh Fidelity Poland named it Best Product in 2010, and What Hi-Fi (UK) explicitly praised the combination with a Lavardin preamp in September 2010 for its price-to-performance ratio in sound quality and musicality during everyday listening at home, not just in the test lab.\u003c\/p\u003e\n\u003ch3\u003eWhich preamp suits the AP150?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer explicitly recommends an equally memory-free preamp such as the Lavardin CX42 to unlock its full potential. In principle, though, any high-quality preamp with sufficient output level and matching impedance works well with the AP150, as practice shows.\u003c\/p\u003e\n\u003ch3\u003eIs the AP150's power enough for large floorstanding speakers?\u003c\/h3\u003e\n\u003cp\u003eIn the vast majority of cases, yes. With 2× 55 watts at 8 ohms and up to 2× 110 watts at 2 ohms, the AP150 has noticeably more headroom than the more compact Lavardin models and confidently controls more demanding impedance curves too.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin AP150 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe put together a coherent system for you from the AP150, a matching preamp, and speakers, instead of just selling you a single unit. Call us, message us on WhatsApp, or drop by for a consultation with us in Wädenswil.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe AP150 wants to bring power to a good system: pair it with our \u003ca href=\"\/en\/collections\/vorverstarker\"\u003eLavardin CX42\u003c\/a\u003e and quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534114185552,"sku":null,"price":6395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-ap150-stereo-endstufe-frontansicht.jpg?v=1788959077"},{"product_id":"lavardin-map-endverstaerker","title":"Lavardin MAP Mono Power Amplifiers Pair France","description":"\u003cp\u003eThe Lavardin MAP is a pair of completely separate mono power amplifiers – one chassis per channel, each with its own complete power supply. This design has been considered the pinnacle of the Lavardin power-amp range for years.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MAP?\u003c\/h2\u003e\n\u003cp\u003eInstead of sharing two channels in one chassis, Lavardin gives the MAP its own complete power supply per channel. That costs more space and more money than a classic stereo power amp, but it fully decouples the two channels from each other – a tangible advantage with demanding speaker loads that you can hear even without a measuring device.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eDespite a moderate wattage, the MAP feels more authoritative in the bass and more stable in the soundstage than the numbers suggest – a direct result of having a dedicated power amp per channel. Details that get lost in the noise floor with shared power supplies come through more clearly, without the presentation turning clinical or analytical.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MAP for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor music lovers with demanding, possibly hard-to-drive speakers, who are willing to place two separate chassis in the rack for maximum channel separation. Straight talk: if you're short on space, or would already be happy with a classic stereo power amp like the AP150, you don't need to pay the premium for the MAP.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe MAP isn't a device for the spec sheet, but for ears that actually want to hear the difference between good and uncompromising channel separation. Anyone investing here demands the best possible – and gets it.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: pair (2 mono chassis, 1 channel each)\u003c\/li\u003e\n\u003cli\u003ePower: 55 W RMS at 8 Ω per channel, max. 110 W at 2 Ω per channel\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 780 mV, input impedance 10 kΩ\u003c\/li\u003e\n\u003cli\u003eInput: 1 RCA input per chassis\u003c\/li\u003e\n\u003cli\u003eOutput: 1 pair of speaker terminals (5-way) per chassis\u003c\/li\u003e\n\u003cli\u003eDistortion: 0.001% at full power\u003c\/li\u003e\n\u003cli\u003ePower consumption: 25 W in standby per chassis, max. 400 W\u003c\/li\u003e\n\u003cli\u003eDimensions per chassis (W×H×D): 430 × 135 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg per chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does the MAP need two separate chassis?\u003c\/h3\u003e\n\u003cp\u003eBecause each channel gets its own complete power supply. This complete separation of the power supply prevents the two channels from interfering with each other – especially during dynamic musical passages, a clearly audible advantage over shared power supplies in one chassis.\u003c\/p\u003e\n\u003ch3\u003eIs the MAP sold as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eExclusively as a pair, since a stereo system always needs both mono chassis – one per speaker channel. The stated price refers to the complete pair, including both power supplies and chassis, ready to operate with your system.\u003c\/p\u003e\n\u003ch3\u003eDoes the MAP suit hard-to-drive speakers?\u003c\/h3\u003e\n\u003cp\u003eYes, that's one of its strengths. The complete channel separation, with its own power supply per power amp, ensures stable control even as impedance drops, where shared stereo power amps tend to reach their limits and can audibly falter – the MAP stays composed.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin MAP from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eA device in this class deserves a personal consultation, not an online click without any questions asked. Call us, message us on WhatsApp, or drop by in Wädenswil, and let's talk together about your speakers and your room.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA high-resolution preamp like our \u003ca href=\"\/en\/collections\/vorverstarker\"\u003eLavardin CX42\u003c\/a\u003e suits the MAP well; for cabling between the two chassis, our \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e selection is worth a look.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534114971984,"sku":null,"price":11740.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-map-mono-endstufen-paar-frontansicht.jpg?v=1788959077"},{"product_id":"lavardin-map-20-endverstaerker","title":"Lavardin MAP-20 Mono Power Amplifiers Pair Reference","description":"\u003cp\u003eThe Lavardin MAP-20 is the refined evolution of the MAP – a pair of mono power amplifiers with its own power supply per channel, whose circuitry and power supply Lavardin has further reworked for this version. It's the most expensive and, according to the manufacturer itself, the most advanced power amp in the range.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MAP-20?\u003c\/h2\u003e\n\u003cp\u003eAs with the other Reference and X versions in the Lavardin range, the basic concept stays unchanged – two completely separate mono chassis, each with its own power supply – while components and circuit details have been further refined. The MAP-20 thus marks the pinnacle of what Lavardin builds in power amps with its Memory-Free technology.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eCompared to the MAP, the MAP-20 feels even more assured in control and more finely resolved in quiet passages, while its neutral, effortless basic character stays the same. The gain shows up less in raw power than in the ability to keep an overview even with complex, densely orchestrated music.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the MAP-20 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor customers with an already very high-quality system – reference speakers, a finely resolving preamp – who consistently seek the optimum. Straight talk: without an equally capable rest of the chain, a large part of the premium over the MAP simply evaporates; an honest consultation beforehand pays off here.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe MAP-20 is a statement piece for a small target group who know what they want and are willing to pay for it. Anyone planning a system like this should absolutely listen to it calmly first.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration: pair (2 mono chassis, 1 channel each)\u003c\/li\u003e\n\u003cli\u003ePower: 55 W RMS at 8 Ω per channel, max. 110 W at 2 Ω per channel\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 780 mV, input impedance 10 kΩ\u003c\/li\u003e\n\u003cli\u003eInput: 1 RCA input per chassis\u003c\/li\u003e\n\u003cli\u003eOutput: 1 pair of speaker terminals (5-way) per chassis\u003c\/li\u003e\n\u003cli\u003ePower consumption: 25 W in standby per chassis, max. 400 W\u003c\/li\u003e\n\u003cli\u003eDimensions per chassis (W×H×D): 430 × 135 × 340 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 kg per chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the MAP-20 and the MAP?\u003c\/h3\u003e\n\u003cp\u003eBoth share the concept of two completely separate mono chassis, each with its own power supply. The MAP-20 brings further reworked components and circuit details that, according to the manufacturer, deliver more control and finer resolution, while keeping the same basic concept and format.\u003c\/p\u003e\n\u003ch3\u003eWhat system suits the MAP-20?\u003c\/h3\u003e\n\u003cp\u003eIt makes the most sense in an already very high-quality system with a finely resolving preamp and demanding speakers. In a simpler chain, the more affordable MAP is often the better choice, because the difference matters less there.\u003c\/p\u003e\n\u003ch3\u003eIs the MAP-20 delivered as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, just like with the MAP, a stereo system needs both mono chassis – one per channel. The stated price applies to the complete pair, including both power supplies and chassis, ready to operate with your stereo system and any speakers.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin MAP-20 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eFor an investment of this scale, we favour a personal conversation over a quick sale – we check together with you whether the rest of the chain can keep up. Get in touch by phone, WhatsApp, or email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eOur reference preamp, the \u003ca href=\"\/en\/collections\/vorverstarker\"\u003eLavardin CX42\u003c\/a\u003e, suits the MAP-20 well; for that final fine-tuning, we recommend quality \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cables\u003c\/a\u003e.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534115692880,"sku":null,"price":17600.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-map-20-mono-endstufen-paar-frontansicht.jpg?v=1788961143"},{"product_id":"lavardin-cm-r-250-netzkabel","title":"Lavardin CM-R 250 Power Cable 2.5 m France","description":"\u003cp\u003eThe Lavardin CM-R 250 is the manufacturer's own-brand power cable, 2.5 metres in length – developed to give amplifiers, CD players, and other devices, both from its own brand and others, a cleaner power supply.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the CM-R 250?\u003c\/h2\u003e\n\u003cp\u003eA power cable is often underestimated as the last link in the chain, yet the entire power supply of an amplifier or player depends on it. Lavardin builds the CM-R 250 on the same principles as its amplifiers: as little loss as possible, as clean a transfer as possible – entirely without the marketing hyperbole you know from some high-end cables.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe effect of a good power cable is rarely spectacular, but often real: a touch calmer overall tonality, a bit more control in dynamic passages. According to the manufacturer, the benefit shows up on practically any type of device – from Lavardin amplifiers through CD players to power amps of other brands, and even electrostatic speakers with their own power supply.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the CM-R 250 for? (and who isn't it for)\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to run their Lavardin component – or any other high-quality device – with a well-thought-out power cable instead of the standard cable supplied. Straight talk: if you're fundamentally sceptical about paying extra for power cables, marketing promises alone won't convince you – the most honest approach is a comparison on your own device.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA solid, unassuming power cable from a manufacturer who also bets on substance over show with its amplifiers. Not a must-have to get started, but a sensible addition once the rest of the chain is right.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 2.5 m\u003c\/li\u003e\n\u003cli\u003eApplication: amplifiers, CD\/SACD players, power amps, active speakers, and other mains-powered devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich devices does the CM-R 250 suit?\u003c\/h3\u003e\n\u003cp\u003ePractically any device with an IEC connector – amplifiers, CD players, power amps, including other brands. According to the manufacturer, even electrostatic speakers with their own power supply noticeably and audibly benefit from the cable's cleaner power supply, not just on paper.\u003c\/p\u003e\n\u003ch3\u003eHow long is the Lavardin CM-R 250?\u003c\/h3\u003e\n\u003cp\u003eThe cable is 2.5 metres long, as the model name already suggests. That's usually easily enough for most rack setups to reach the nearest outlet or power strip, even with a somewhat greater distance from the wall.\u003c\/p\u003e\n\u003ch3\u003eDoes a power cable really make an audible difference?\u003c\/h3\u003e\n\u003cp\u003eThe effect is usually subtle, not dramatic – a bit more calm in the overall tonality, a bit more control in dynamic moments, varying in strength depending on the device and the rest of the chain. The most honest way to judge it is a direct comparison on your own device.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Lavardin CM-R 250 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe only recommend the power cable to you if it suits your device and your expectations, instead of pushing it on you across the board. Call us, message us on WhatsApp, or drop by, and we'll test it together on your system.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eOur other \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cables\u003c\/a\u003e suit the CM-R 250 well for other devices in your chain, as do \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e for the rest of the setup.\u003c\/p\u003e","brand":"LAVARDIN","offers":[{"title":"Standard","offer_id":53534116381008,"sku":null,"price":506.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/lavardin-cm-r-250-netzkabel-produktansicht.jpg?v=1788959077"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/lavardin.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}