{"title":"Speaker Cable","description":"\u003cp\u003eA speaker cable carries the amplified music signal from the amplifier or power amp to your speakers.\u003c\/p\u003e\n\n\u003ch2\u003eWhy a good speaker cable?\u003c\/h2\u003e\n\u003cp\u003eThe speaker cable is the last stretch before the box – nothing more should be lost here. What matters is a sufficient cross-section, clean contacts and solidly finished ends. A sensible cable doesn't sound \"better\" than physically possible, but it makes sure your power amp controls the speakers cleanly, instead of losing part of its strength in the resistance of a cable that's too thin.\u003c\/p\u003e\n\n\u003ch2\u003eWhat matters\u003c\/h2\u003e\n\u003cp\u003eThree things matter: the right cross-section for the length, both sides the same length, and a clean termination with a banana plug, spade or bare wire. At HD Zürisee in Wädenswil we make your speaker cable to measure – in the exact length, with the connectors that match your amplifier and your speakers. We work out single-wire or bi-wire based on your speakers.\u003c\/p\u003e\n\n\u003ch2\u003eWho it's for – and straight talk\u003c\/h2\u003e\n\u003cp\u003eFrom your first stereo setup to a high-end chain with mono power amps: a good speaker cable belongs in every system. Anyone connecting new speakers, rearranging their room, or who has never questioned the cross-section of the old cable they've been dragging along will find what they need here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e a solid cable with the right cross-section gets you most of the way. The premium for exotic materials only pays off in very high-resolution chains and only for fine ears. We tell you honestly from what point the extra spend is worth it and from what point your budget is better spent on the speakers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVerdict:\u003c\/strong\u003e the right cross-section, clean connectors, both sides the same length – then the cable has done its job. If you're unsure which cross-section fits your cable length, we'll work it out with you in a moment.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the right cross-section?\u003c\/h3\u003e\n\u003cp\u003eFor typical living-room lengths up to around five metres, 2.5 mm² is a safe choice, for short runs 1.5 mm² is often enough. The longer the run and the lower the impedance of the speaker, the more cross-section you need. Tell us the length and your speakers, and we'll recommend the right cross-section.\u003c\/p\u003e\n\u003ch3\u003eSingle-wire or bi-wire?\u003c\/h3\u003e\n\u003cp\u003eThat depends on your speakers: only speakers with two pairs of connection terminals can be bi-wired at all. The audible difference is usually small. If your speaker only has one pair of terminals, single-wire is a given anyway. We'll take a look at your terminals and recommend the sensible option.\u003c\/p\u003e\n\u003ch3\u003eDoes length matter?\u003c\/h3\u003e\n\u003cp\u003eYes, especially in combination with the cross-section. More important than short runs is that both speakers are connected with roughly equal cable length. Better a bit of spare in equal length than one short and one long side. For larger distances we simply increase the cross-section.\u003c\/p\u003e\n\u003ch3\u003eDo I need banana plugs or bare wire?\u003c\/h3\u003e\n\u003cp\u003eBanana plugs and spades make connecting easier, repeatable and contact-secure – especially with thick cable. Bare, twisted wire also works, but tends more towards loose contacts. We'll terminate the ends for you to match your terminals.\u003c\/p\u003e\n\u003ch3\u003eDo you make speaker cable to measure?\u003c\/h3\u003e\n\u003cp\u003eYes. We make your speaker cable to the length you want with matching connectors, cleanly finished. That way you get exactly the length your room needs, without coiled-up excess behind the rack or cables that are too short.\u003c\/p\u003e\n\u003ch3\u003eWhy buy speaker cable at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we see cable, amplifier and speakers as one system and recommend the cross-section that matches your chain and your room. We make custom lengths in-house, with the matching connectors included. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What's the right cross-section?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For typical living-room lengths up to around five metres, 2.5 mm² is a safe choice, for short runs 1.5 mm² is often enough. The longer the run and the lower the impedance of the speaker, the more cross-section you need. Tell us the length and your speakers, and we'll recommend the right cross-section.\"}},{\"@type\":\"Question\",\"name\":\"Single-wire or bi-wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on your speakers: only speakers with two pairs of connection terminals can be bi-wired at all. The audible difference is usually small. If your speaker only has one pair of terminals, single-wire is a given anyway. We'll take a look at your terminals and recommend the sensible option.\"}},{\"@type\":\"Question\",\"name\":\"Does length matter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, especially in combination with the cross-section. More important than short runs is that both speakers are connected with roughly equal cable length. Better a bit of spare in equal length than one short and one long side. For larger distances we simply increase the cross-section.\"}},{\"@type\":\"Question\",\"name\":\"Do I need banana plugs or bare wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Banana plugs and spades make connecting easier, repeatable and contact-secure – especially with thick cable. Bare, twisted wire also works, but tends more towards loose contacts. We'll terminate the ends for you to match your terminals.\"}},{\"@type\":\"Question\",\"name\":\"Do you make speaker cable to measure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We make your speaker cable to the length you want with matching connectors, cleanly finished. That way you get exactly the length your room needs, without coiled-up excess behind the rack or cables that are too short.\"}},{\"@type\":\"Question\",\"name\":\"Why buy speaker cable at HD Zürisee?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because we see cable, amplifier and speakers as one system and recommend the cross-section that matches your chain and your room. We make custom lengths in-house, with the matching connectors included. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\"}}]}\u003c\/script\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/stecker\"\u003eBanana Plugs \u0026amp; Spades\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/vollverstarker\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/endstufen\"\u003ePower Amplifiers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/kabel\"\u003eAll Cables \u0026amp; Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"audioquestq2","title":"AudioQuest Q-2 Speaker Cable (3 m)","description":"\u003cp\u003eThe AudioQuest Q-2 is a ready-made pair of speaker cables (2 × 3 m) with Solid+ Concentric conductors made of Long-Grain Copper (LGC) and banana plugs fitted on both ends. Unpack, plug in, done — the unglamorous first step away from the nameless bundled wire that's been aging behind the sideboard for years.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Q-2?\u003c\/h2\u003e\n\u003cp\u003eAt its core sits a solid LGC conductor, around which eleven finer LGC strands spiral — AudioQuest calls this Solid+ Concentric. The trick: the strands keep their position relative to each other instead of constantly touching and letting go as in an ordinary stranded wire. Less strand interaction, fewer grain boundaries, less of the slightly rough hardness that budget cables tend to bring along. The Low-Inductance Twisted-Pair layout additionally keeps inductance low.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo ready-made 3 m lengths in a flat PVC jacket that can be run under carpet edges and behind baseboards, plus SureGrip-100 banana plugs with a directly silver-plated contact surface and no nickel interlayer. No stripping, no crimping, no frayed copper strands looking for contact with each other at the worst possible moment.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Q-2 for — and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: on a high-resolution chain with demanding floorstanding speakers, the Q-2 plays below its potential — there, the Rocket series gets noticeably more out of it. Its territory is compact systems, bookshelf speakers, and any setup currently running nameless two-conductor wire. And if your speakers sit further than three meters apart, you'll need a different length — just let us know.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Q-2 is the most matter-of-fact argument against bundled cables that we know: cleanly made, honestly priced, audibly calmer. Which length and plug type fit your equipment, we'll sort out in two minutes — HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, ready-made (pair)\u003c\/li\u003e\n\u003cli\u003eConductor: Solid+ Concentric Long-Grain Copper (LGC) — solid core plus eleven spirally wound LGC strands\u003c\/li\u003e\n\u003cli\u003eGauge: 14 AWG\u003c\/li\u003e\n\u003cli\u003eGeometry: Low-Inductance Twisted Pair, direction-optimized\u003c\/li\u003e\n\u003cli\u003eInsulation and jacket: PVC, flat profile\u003c\/li\u003e\n\u003cli\u003ePlugs: SureGrip 100 banana, directly silver-plated, cold-welded\u003c\/li\u003e\n\u003cli\u003eLength: 2 × 3 m (pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: two ready-made 3 m cables, banana plugs on both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I get one cable or two?\u003c\/h3\u003e\n\u003cp\u003eTwo. The Q-2 ships as a ready-made pair — one 3 m length each for the left and right speaker. Both ends already have banana plugs fitted. You don't need to strip anything, solder anything, or buy anything extra.\u003c\/p\u003e\n\u003ch3\u003eWhat does Long-Grain Copper offer over ordinary copper?\u003c\/h3\u003e\n\u003cp\u003eLonger copper crystals, and therefore fewer grain boundaries. Every grain boundary is a tiny transition where the signal is minimally disturbed. The fewer of those lie along the run, the calmer and less distorted the music arrives at the speaker — audibly, above all, as less hardness.\u003c\/p\u003e\n\u003ch3\u003eDo the banana plugs fit my amplifier?\u003c\/h3\u003e\n\u003cp\u003eIn the vast majority of cases, yes — banana jacks are the standard on amplifiers and speakers. There are exceptions with pure screw terminals or spade-lug connections. Tell us your amplifier and speaker model, and we'll tell you in advance whether it fits or whether a different termination makes more sense.\u003c\/p\u003e\n\u003ch3\u003eWhen is it worth switching to a Rocket cable?\u003c\/h3\u003e\n\u003cp\u003eAs soon as your system resolves more finely than the Q-2 can show. The Rocket series steps up quietness, dynamics, and bass control, and also offers single-biwire. For entry-level chains, though, the Q-2 is honestly enough — we'd rather not sell you headroom you'll never use.\u003c\/p\u003e\n\u003ch3\u003eWhy order the Q-2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause you'll get an honest assessment from us on whether this cable actually does anything for your system. Our experienced team knows the connection situations of common amplifiers and can make up custom lengths on request. Call, WhatsApp, or email us — even for small questions.\u003c\/p\u003e\n\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eA cable alone doesn't make a system: browse the \u003ca href=\"\/en\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e, compare in the \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003eSpeaker Cables\u003c\/a\u003e section, or take a look at the whole \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"Default Title","offer_id":52989484433744,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-q-2-lautsprecherkabel-produktansicht.png?v=1785437770"},{"product_id":"hd-one-high-end-lautsprecherkabel-stereo-single-wire","title":"HD ONE High-End Speaker Cable, Stereo, Single-Wire","description":"\u003cp\u003eThe HD ONE is a hand-assembled high-end speaker cable for the classic single-wire connection – one cable per speaker, to one pair of terminals. It's built at HD Zürisee in Wädenswil, metre by metre, to the length you order.\u003c\/p\u003e\n\u003ch2\u003eWhy the HD ONE?\u003c\/h2\u003e\n\u003cp\u003eA speaker cable doesn't make your sound better. One that's too thin makes it worse – that's exactly where the HD ONE comes in. With 2 × 4 mm² of high-purity, oxygen-free copper, resistance stays low, so your amplifier keeps control over the bass cones. The gold-plated banana plugs with a spread function clamp firmly into the socket instead of sitting loosely in it – it's at the transition to the terminal that many systems give away their reserves.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA ready-assembled stereo pair to unpack and plug in: no stripping, no soldering, no fiddling behind the rack. On the outside, high-density polyethylene sits under a fabric sleeve that keeps the cable's shape and makes it insensitive to vacuum cleaners and chair legs. Lengths range from 2 × 0.5 m to 2 × 5.0 m in 0.5 m steps – you choose what your room calls for.\u003c\/p\u003e\n\u003ch3\u003eWho is the HD ONE for?\u003c\/h3\u003e\n\u003cp\u003eFor quality systems whose speakers have one pair of terminals, or whose bridges stay in place. Straight talk: on an entry-level chain you won't unlock its potential – there, your money is better invested in better speakers. If you really want to run the treble and bass terminals separately, you need the bi-wire version.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOur most uncompromising house cable: plenty of copper, clean handiwork, no esotericism. It's not a magic wand – but it's the last point in your chain where you can still get in your own way. Honestly: if you've invested in good speakers, don't starve them through the cable.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: High-end speaker cable, stereo pair\u003c\/li\u003e\n\u003cli\u003eConfiguration: Single-wire\u003c\/li\u003e\n\u003cli\u003eCross-section: 2 × 4 mm²\u003c\/li\u003e\n\u003cli\u003eConductor material: High-purity, oxygen-free copper (OFC)\u003c\/li\u003e\n\u003cli\u003eConnectors: Gold-plated banana plugs with spread function\u003c\/li\u003e\n\u003cli\u003eSheathing: High-density polyethylene with fabric sleeve\u003c\/li\u003e\n\u003cli\u003eLengths: 2 × 0.5 m to 2 × 5.0 m in 0.5 m steps\u003c\/li\u003e\n\u003cli\u003eAssembly: By hand in Wädenswil\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair HD ONE speaker cable (pre-assembled), care instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between single-wire and bi-wire?\u003c\/h3\u003e\n\u003cp\u003eSingle-wire is the classic connection: one cable per speaker, to one pair of terminals. Bi-wire separates the treble and bass branches via two conductor pairs from the same amplifier channel. If your speaker only has one pair of terminals, or the bridges stay in place, single-wire is the right choice – and that's exactly what this version is built for.\u003c\/p\u003e\n\u003ch3\u003eWhat length should I choose?\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual path from the amplifier to the speaker, including any bends behind the rack, and round up to the next half metre. Too short is annoying; half a metre of slack never hurts. Pairs are available from 2 × 0.5 m to 2 × 5.0 m in 0.5 m steps.\u003c\/p\u003e\n\u003ch3\u003eDoes a better speaker cable improve the sound?\u003c\/h3\u003e\n\u003cp\u003eNo, no cable can make the sound better. A conductor that's too thin or poorly contacted, however, audibly costs you control in the bass. The HD ONE keeps resistance low at 2 × 4 mm² and the connection at the terminal clean. It simply doesn't take anything away.\u003c\/p\u003e\n\u003ch3\u003eDo I still need to strip or solder anything on the HD ONE?\u003c\/h3\u003e\n\u003cp\u003eNo. The pair arrives fully assembled with gold-plated banana plugs that clamp themselves into the socket thanks to the spread function. You plug it in and you're done. If your terminals only accept spade connectors, let us know before ordering – then we'll clarify what's feasible in advance.\u003c\/p\u003e\n\u003ch3\u003eWhy buy HD ONE speaker cable at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause it's our own cable: we build it by hand in Wädenswil, know every step of the process, and know from years of advisory experience which cross-section and length suit which system. Call us, email us, or reach us on WhatsApp – we'll go through your chain together.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the whole family under \u003ca href=\"\/en\/collections\/hd-one\"\u003eHD ONE\u003c\/a\u003e, and other versions among the \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e. Our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e pair well with it.\u003c\/p\u003e","brand":"HD ONE","offers":[{"title":"2 x 0.5 Meter","offer_id":52989706436944,"sku":null,"price":469.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.0 Meter","offer_id":52989706469712,"sku":null,"price":588.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.5 Meter","offer_id":52989648994640,"sku":null,"price":707.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.0 Meter","offer_id":52989649027408,"sku":null,"price":826.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.5 Meter","offer_id":52989649060176,"sku":null,"price":945.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.0 Meter","offer_id":52989649092944,"sku":null,"price":1064.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.5 Meter","offer_id":52989706502480,"sku":null,"price":1183.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.0 Meter","offer_id":52989649125712,"sku":null,"price":1302.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.5 Meter","offer_id":52989706535248,"sku":null,"price":1421.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 5.0 Meter","offer_id":52989649158480,"sku":null,"price":1540.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/hd-one-high-end-lautsprecherkabel-stereo-single-wire-paaransicht.png?v=1785925920"},{"product_id":"hd-one-high-end-lautsprecherkabel-stereo-bi-wire","title":"HD ONE High-End Speaker Cable, Stereo, Bi-Wire","description":"\u003cp\u003eThe HD ONE Bi-Wire is a hand-assembled high-end speaker cable that drives your speaker's treble and bass branches via separate conductor pairs.\u003c\/p\u003e\n\u003cp\u003eIt's built by us in Wädenswil: HD ONE is HD Zürisee's own house brand, not a bought-in label.\u003c\/p\u003e\n\u003ch2\u003eWhy the HD ONE in bi-wire?\u003c\/h2\u003e\n\u003cp\u003eLet's be honest: a cable doesn't make your sound better, but one that's too thin or sloppily assembled makes it worse. That's why the HD ONE packs in plenty of proper copper: silver-plated OFC strands for the treble, tinned ones for the bass, with insulation between the conductors.\u003c\/p\u003e\n\u003cp\u003eBi-wiring means: the powerful currents of the woofer and the fine signals of the tweeter run separately all the way to the terminal. That usually brings a bit more calm to the soundstage. Straight talk: it's not a miniature system upgrade.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA fully assembled stereo set to your length, with spread-type banana plugs in 24-carat gold plating at every end: two plugs on the amplifier side, four on the speaker side, per channel. No stripping, no crimping, no DIY afternoon.\u003c\/p\u003e\n\u003ch3\u003eWho is the HD ONE Bi-Wire for?\u003c\/h3\u003e\n\u003cp\u003eFor you, if your speakers have two pairs of terminals and the bridges between them can be removed. Straight talk: with only one pair of terminals, bi-wire achieves exactly nothing – then the single-wire version is the honest answer. And if you leave the metal bridges in place out of convenience, you're still effectively running single-wire despite the four conductors.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003ePlenty of copper, separate signal paths, solid handiwork, and plugs that still sit tight after years. Not a magic wand, but the link you no longer need to think about.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: High-end speaker cable, stereo set\u003c\/li\u003e\n\u003cli\u003eConfiguration: Bi-wire, 2 plugs amplifier-side \/ 4 speaker-side per channel\u003c\/li\u003e\n\u003cli\u003eCross-section: 4 × 2.5 mm²\u003c\/li\u003e\n\u003cli\u003eConductor: Multi-strand, high-purity copper (OFC)\u003c\/li\u003e\n\u003cli\u003eStructure inside to outside: bass with tinned OFC strands, conductor insulation, treble with silver-plated OFC strands, fleece binding, soft jacket\u003c\/li\u003e\n\u003cli\u003eConnectors: Spread-type banana plugs with 24-carat gold plating\u003c\/li\u003e\n\u003cli\u003eSheathing: Fabric sleeve in anthracite black\u003c\/li\u003e\n\u003cli\u003eLengths: 2 × 0.5 m to 2 × 5.0 m in 0.5 m steps, special lengths on request\u003c\/li\u003e\n\u003cli\u003eAssembly: By hand in Wädenswil\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair HD ONE bi-wire speaker cable, installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need special speakers for bi-wire?\u003c\/h3\u003e\n\u003cp\u003eYes. Your speaker needs two pairs of terminals, one for the treble and one for the bass, and the bridges between them must be removable. If they stay in, both branches are electrically joined together again and the cable effectively works as single-wire. A glance at the terminal is enough to tell.\u003c\/p\u003e\n\u003ch3\u003eWhat does bi-wiring do sonically, and when does it do nothing?\u003c\/h3\u003e\n\u003cp\u003eSeparate conductor pairs keep the powerful bass currents away from the treble branch, which many perceive as a calmer soundstage and finer resolution. It does nothing for speakers with only one pair of terminals, with permanently soldered bridges, or when the existing cable is simply too thin. In that case, address the cross-section first.\u003c\/p\u003e\n\u003ch3\u003eWhat length should I choose?\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual cable run along the wall, skirting board and rack, not the straight-line distance, and add a bit of slack. We build the set in 0.5-metre steps from 2 × 0.5 to 2 × 5.0 metres. Both channels get the same length, even if one speaker sits closer.\u003c\/p\u003e\n\u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e\n\u003cp\u003eSpread-type banana plugs with 24-carat gold plating, fully fitted at every end. Per channel, that's two plugs on the amplifier side and four on the speaker side. The spread mechanism ensures a firm fit in the socket, and the gold layer keeps contact resistance stable for years. Please ask about other connection types before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhy buy HD ONE Bi-Wire at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we build it ourselves and therefore know exactly what's inside. HD ONE is our own house brand; every set is hand-made in Wädenswil to your length. Add to that an experienced team who will also tell you when single-wire makes more sense for you. Call or write to us.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find further lengths among the \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and in the \u003ca href=\"\/en\/collections\/kabel\"\u003ecable range\u003c\/a\u003e. Bi-wire-capable partners are found among the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, all from our own workshop under \u003ca href=\"\/en\/collections\/hd-one\"\u003eHD ONE\u003c\/a\u003e.\u003c\/p\u003e","brand":"HD ONE","offers":[{"title":"2 x 0.5 Meter","offer_id":52989691003216,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.0 Meter","offer_id":52989691035984,"sku":null,"price":538.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.5 Meter","offer_id":52989649191248,"sku":null,"price":657.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.0 Meter","offer_id":52989649224016,"sku":null,"price":776.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.5 Meter","offer_id":52989649256784,"sku":null,"price":895.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.0 Meter","offer_id":52989649289552,"sku":null,"price":1014.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.5 Meter","offer_id":52989691068752,"sku":null,"price":1133.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.0 Meter","offer_id":52989649322320,"sku":null,"price":1252.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.5 Meter","offer_id":52989691101520,"sku":null,"price":1371.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 5.0 Meter","offer_id":52989649355088,"sku":null,"price":1490.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/hd-one-high-end-lautsprecherkabel-stereo-bi-wire-paaransicht.png?v=1785925921"},{"product_id":"hd-one-high-end-lautsprecherkabel-stereo-bi-amp","title":"HD ONE High-End Speaker Cable, Stereo, Bi-Amp","description":"\u003cp\u003eThe HD ONE in the bi-amp version is a hand-assembled high-end speaker cable that connects each speaker to two separate amplifier channels via four dedicated conductors.\u003c\/p\u003e\n\u003cp\u003eIt's built at HD Zürisee in Wädenswil, cut to your desired length: silver-plated strands for the treble, tinned ones for the bass.\u003c\/p\u003e\n\u003ch2\u003eWhy the HD ONE in bi-amp?\u003c\/h2\u003e\n\u003cp\u003eHonestly: a cable doesn't make your sound better – one that's too thin makes it worse. The HD ONE keeps resistance low and capacitance low. In the bi-amp version, two separate conductor pairs run per speaker to the treble and bass terminals, each on its own amplifier channel.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA ready-made stereo set for genuine bi-amping: per speaker, four solid spread-type banana plugs on the amplifier side, four on the speaker side, all 24-carat gold-plated. Stripping, twisting strands, quiet cursing – all eliminated.\u003c\/p\u003e\n\u003ch3\u003eWho is the bi-amp version for?\u003c\/h3\u003e\n\u003cp\u003eFor you, if your speakers have two pairs of terminals (bridges removed) and two amplifier channels are available per side. Straight talk: without that second channel, bi-amping makes no sense – then the single-wire or bi-wire version is the more honest choice. And honestly: it remains a refinement, not a transformation.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most uncompromising version of our house cable: plenty of copper, separate branches, solid connectors. It rewards systems with two amplifier channels per side – and leaves all others cold.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: High-end speaker cable for bi-amping, assembled stereo pair\u003c\/li\u003e\n\u003cli\u003eStructure: 8 × 2.5 mm² high-purity, oxygen-free copper (OFC) – four conductors per speaker\u003c\/li\u003e\n\u003cli\u003eTreble branch: Silver-plated OFC strands\u003c\/li\u003e\n\u003cli\u003eBass branch: Tinned OFC strands\u003c\/li\u003e\n\u003cli\u003eInsulation and jacket: High-density polyethylene, fleece binding, vibration-damping soft fabric jacket\u003c\/li\u003e\n\u003cli\u003eCapacitance: Very low\u003c\/li\u003e\n\u003cli\u003eConnectors: Solid spread-type banana plugs, 24-carat gold-plated – four per speaker on the amplifier side, four on the speaker side\u003c\/li\u003e\n\u003cli\u003eLengths: 2 × 0.5 m to 2 × 5.0 m in 0.5 m steps, special lengths on request\u003c\/li\u003e\n\u003cli\u003eAssembly: By hand in Wädenswil\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair HD ONE bi-amp speaker cable, marking rings, safety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between bi-wiring and bi-amping?\u003c\/h3\u003e\n\u003cp\u003eBi-wiring only separates the cable paths: one amplifier feeds the treble and bass terminals via two separate conductor pairs. With bi-amping, each branch additionally gets its own amplifier channel. The crossover in the speaker stays active in both cases – so you don't need an external crossover, but you do need speakers with two pairs of terminals.\u003c\/p\u003e\n\u003ch3\u003eWhen does bi-amping actually pay off?\u003c\/h3\u003e\n\u003cp\u003eWhen you already have two amplifier channels per side and speakers with two pairs of terminals. Then you gain control in the bass and a bit more calm in the treble, because the branches no longer share one amplifier stage. If you'd first have to buy a second amplifier stage, you're better off investing in placement and room acoustics.\u003c\/p\u003e\n\u003ch3\u003eWhat length should I choose?\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual cable path along the wall, skirting board and furniture, not the straight-line distance, and add a bit of slack. The HD ONE is available from 2 × 0.5 to 2 × 5.0 metres in half-metre steps, special lengths on request. Both sides are assembled to the same length.\u003c\/p\u003e\n\u003ch3\u003eDo the banana plugs fit my connections?\u003c\/h3\u003e\n\u003cp\u003eThe solid spread-type banana plugs fit all common binding posts on amplifiers and speakers. Safety sockets with a plastic cap need to be opened or removed beforehand. If your devices only have screw terminals without banana sockets, let us know before ordering – then we'll clarify the assembly with you in advance.\u003c\/p\u003e\n\u003ch3\u003eWhy buy HD ONE Bi-Amp at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the HD ONE is our own cable: we developed it, we build it in Wädenswil, and from many systems we've looked after we know exactly where bi-amping really makes a difference. Call, write to us, or send us your equipment setup via WhatsApp – we'll tell you honestly which version suits you.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the second amplifier channel among the \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifiers\u003c\/a\u003e, and the right speakers among the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. The other versions are available under \u003ca href=\"\/en\/collections\/hd-one\"\u003eHD ONE\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e.\u003c\/p\u003e","brand":"HD ONE","offers":[{"title":"2 x 0.5 Meter","offer_id":52989692117328,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.0 Meter","offer_id":52989692150096,"sku":null,"price":518.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.5 Meter","offer_id":52989649584464,"sku":null,"price":637.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.0 Meter","offer_id":52989649617232,"sku":null,"price":756.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.5 Meter","offer_id":52989649650000,"sku":null,"price":875.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.0 Meter","offer_id":52989649682768,"sku":null,"price":994.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.5 Meter","offer_id":52989692182864,"sku":null,"price":1113.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.0 Meter","offer_id":52989649715536,"sku":null,"price":1232.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.5 Meter","offer_id":52989692215632,"sku":null,"price":1351.0,"currency_code":"CHF","in_stock":true},{"title":"2 x 5.0 Meter","offer_id":52989649748304,"sku":null,"price":1470.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/hd-one-high-end-lautsprecherkabel-stereo-bi-amp-paaransicht.png?v=1785925942"},{"product_id":"hd-two-premium-lautsprecherkabel-stereo-single-wire","title":"HD TWO Premium Speaker Cable, Stereo, Single-Wire","description":"\u003cp\u003eThe HD TWO is our best-selling house cable – a premium speaker cable hand-assembled in Wädenswil, with two conductors of 4 mm² each for the classic single-wire connection.\u003c\/p\u003e\n\u003cp\u003eA blend of silver-plated and tin-plated strands conjures clear highs and punchy, tight bass. It gets the best out of your system without adding anything that isn't there.\u003c\/p\u003e\n\u003ch2\u003eWhy the HD TWO?\u003c\/h2\u003e\n\u003cp\u003eLet's be honest: a speaker cable doesn't make your sound better – but a cheap or too-thin cable makes it worse. The HD TWO is the solid, honest foundation: high-purity, oxygen-free copper (OFC) carries the signal cleanly, the generous cross-section lowers resistance and gives your amplifier better control over the bass cones. Think of it like a generously sized water pipe: full pressure instead of a tired trickle.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA ready-made stereo set, hand-built in Wädenswil and cut to your desired length – no stripping needed. On request with high-quality banana plugs or spade connectors, marked for right (red) and left (black) plus marked direction of travel.\u003c\/p\u003e\n\u003ch3\u003eWho is the HD TWO for?\u003c\/h3\u003e\n\u003cp\u003eFor audio systems from roughly CHF 800 to CHF 5,000 – ideal for good bookshelf and floorstanding speakers. Bluntly: if your system is in the absolute entry-level range, this cable won't work miracles. If you want more, reach for our flagship HD ONE.\u003c\/p\u003e\n\u003ch3\u003eCan I try the HD TWO for free?\u003c\/h3\u003e\n\u003cp\u003eYes. We'll send you our house cable to try on your system at home. Fair warning: experience shows there's a certain \"now I have to keep it\" risk. Call us, send us a WhatsApp, or drop us an email.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe HD TWO is our bestseller for good reason: honest, punchy signal transfer, handmade in Wädenswil, fairly priced. It particularly shows its strengths with bass-heavy music and on tube amplifiers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e your \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and a matching \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Premium speaker cable, stereo pair\u003c\/li\u003e\n\u003cli\u003eConfiguration: Single-wire\u003c\/li\u003e\n\u003cli\u003eConstruction: 2 conductors of 4 mm² each\u003c\/li\u003e\n\u003cli\u003eConductor material: High-purity, oxygen-free copper (OFC), partly silver-plated and partly tin-plated strands\u003c\/li\u003e\n\u003cli\u003eConnectors: Banana plugs or spade connectors, your choice\u003c\/li\u003e\n\u003cli\u003eMarking: Direction of travel and channel right (red) \/ left (black)\u003c\/li\u003e\n\u003cli\u003eLengths: 2 × 0.5 m to 2 × 5.0 m (in 0.5 m increments), custom lengths on request\u003c\/li\u003e\n\u003cli\u003eRecommended for systems approx. CHF 800 to CHF 5,000\u003c\/li\u003e\n\u003cli\u003eAssembly: Hand-made in Wädenswil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does single-wire mean?\u003c\/h3\u003e\n\u003cp\u003eSingle-wire is the classic connection method: the cable carries two conductors (plus and minus) from the amplifier to the two terminals of your speaker. This suits the vast majority of speakers with one pair of terminals.\u003c\/p\u003e\n\u003ch3\u003eCan I also use the HD TWO for home cinema?\u003c\/h3\u003e\n\u003cp\u003eYes. Especially on the front speakers, the HD TWO improves speech intelligibility and adds more punch to effects.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the HD TWO from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause it's our own, best-selling house cable – hand-assembled by us in Wädenswil, cut to your length, and free to try at home. We advise, deliver and install. Free shipping from CHF 190.\u003c\/p\u003e","brand":"HD TWO","offers":[{"title":"2 x 0.5 Meter","offer_id":52989690806608,"sku":null,"price":199.9,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.0 Meter","offer_id":52989690839376,"sku":null,"price":239.8,"currency_code":"CHF","in_stock":true},{"title":"2 x 1.5 Meter","offer_id":52989649781072,"sku":"hdtwo2x3m-0003","price":279.7,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.0 Meter","offer_id":52989649813840,"sku":"hdtwo2x3m-0004","price":319.6,"currency_code":"CHF","in_stock":true},{"title":"2 x 2.5 Meter","offer_id":52989649846608,"sku":"hdtwo2x3m-0005","price":359.5,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.0 Meter","offer_id":52989649879376,"sku":"hdtwo2x3m-0006","price":399.4,"currency_code":"CHF","in_stock":true},{"title":"2 x 3.5 Meter","offer_id":52989690872144,"sku":null,"price":439.3,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.0 Meter","offer_id":52989649912144,"sku":"hdtwo2x3m-0008","price":479.2,"currency_code":"CHF","in_stock":true},{"title":"2 x 4.5 Meter","offer_id":52989690904912,"sku":null,"price":519.1,"currency_code":"CHF","in_stock":true},{"title":"2 x 5.0 Meter","offer_id":52989649944912,"sku":"hdtwo2x3m-0010","price":559.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/hd-two-premium-lautsprecherkabel-stereo-single-wire-paaransicht.jpg?v=1786451647"},{"product_id":"audioquest-rocket-11-lautsprecherkabel","title":"AudioQuest Rocket 11 Speaker Cable","description":"\u003cp\u003eThe AudioQuest Rocket 11 is a made-to-order speaker cable with semi-solid True-Concentric conductors of Long-Grain Copper (LGC) and the entry point into AudioQuest's Rocket series. It's the cable that has set the bar in this class for years – so persistently, in fact, that the competition regularly misses it.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Rocket 11?\u003c\/h2\u003e\n\u003cp\u003eTrue-Concentric means: fewer, but thicker cores, laid in successive, oppositely wound layers that keep their position relative to each other. That eliminates the constant micro-contact that generates distortion in fine strands. Two such conductor pairs run as a twisted double spiral – a low-inductance geometry that holds the timing together. Carbon-based noise dissipation and a Dielectric-Bias System remain reserved for the larger Rockets; the 11 does without them and still sounds remarkably composed.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou choose length and configuration: \u003cstrong\u003eFull-Range\u003c\/strong\u003e with one pair of connectors per side, or \u003cstrong\u003eSingle-BiWire\u003c\/strong\u003e with two connectors at the amplifier and four at the speaker. Termination is with AudioQuest's SureGrip 300, in banana or spade, direct silver-plated with no nickel underlayer. The price is per pair; single runs for a center channel or active subwoofer are made on request.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Rocket 11 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003ePlainly put: if you're running an uncompromisingly resolving high-end system, you're better off with the Rocket 33 or 44 – those add solid-core conductors and carbon dissipation. On good entry- and mid-range systems, though, the Rocket 11 is the point where price and effect line up most cleanly.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eCalm, timing, a soundstage with clear contours: the Rocket 11 delivers the Rocket virtues at an entry-level price. \u003cstrong\u003e5\/5 stars and What Hi-Fi? Award winner – What Hi-Fi?, 2022.\u003c\/strong\u003e We're happy to help you work out which length, configuration and connector type you need: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, made-to-order (Rocket series)\u003c\/li\u003e\n\u003cli\u003eConductors: semi-solid, True-Concentric, Long-Grain Copper (LGC)\u003c\/li\u003e\n\u003cli\u003eCross-section: 4 × 1.31 mm²\u003c\/li\u003e\n\u003cli\u003eGeometry: twisted double spiral (Double Low-Inductance Twisted Pair), direction-optimized\u003c\/li\u003e\n\u003cli\u003eNoise dissipation: no carbon dissipation, no Dielectric-Bias System\u003c\/li\u003e\n\u003cli\u003eInsulation: PVC, CL3\/FT4 (in-wall rated)\u003c\/li\u003e\n\u003cli\u003eConnectors: SureGrip 300, banana or spade, direct silver-plated\u003c\/li\u003e\n\u003cli\u003eConfigurations: Full-Range or Single-BiWire\u003c\/li\u003e\n\u003cli\u003eLengths: 2 m, 2.5 m, 3 m, 4 m (price per pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: made-to-order cable pair in the chosen length and configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhen does Single-BiWire make sense for me?\u003c\/h3\u003e\n\u003cp\u003eWhen your speaker has two pairs of terminals and the jumpers between them can be removed. Single-BiWire routes the tweeter and woofer sections separately within the same cable, while only one pair of connectors still leaves the amplifier. Tell us your speaker model and we'll tell you if it fits.\u003c\/p\u003e\n\u003ch3\u003eDoes the Rocket 11 have carbon-based noise dissipation?\u003c\/h3\u003e\n\u003cp\u003eNo. Carbon-based noise dissipation only starts with the Rocket 22, and a Dielectric-Bias System appears in this series only on the Rocket 88. The Rocket 11 relies instead on semi-solid True-Concentric conductors and the twisted double spiral – which keeps it slim, flexible and affordable.\u003c\/p\u003e\n\u003ch3\u003eBanana or spade – which should I choose?\u003c\/h3\u003e\n\u003cp\u003eThat's decided by the connections on your amplifier and speaker, not by sound. Bananas are the convenient standard, spades sit more firmly and are the only clean solution on some terminals. Send us both device models and we'll pick the right termination.\u003c\/p\u003e\n\u003ch3\u003eWhy is the Rocket 11 worth buying at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we match length, configuration and connectors to your devices instead of just handing you cable by the meter. Our technician Mauri terminates the cables in-house, and we'll tell you upfront whether this step is even worthwhile for your system. Reach us by phone, WhatsApp or email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eTo give the cable something to do: find \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e and more \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e with us – or take a look straight at the \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m \/ Full-Range","offer_id":53019192623440,"sku":null,"price":379.0,"currency_code":"CHF","in_stock":true},{"title":"2 m \/ Single-BiWire","offer_id":53019192656208,"sku":null,"price":449.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Full-Range","offer_id":53019192688976,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Single-BiWire","offer_id":53019192721744,"sku":null,"price":469.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Full-Range","offer_id":53019192754512,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Single-BiWire","offer_id":53019192787280,"sku":null,"price":489.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Full-Range","offer_id":53019192820048,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Single-BiWire","offer_id":53019192852816,"sku":null,"price":529.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-rocket-11-lautsprecherkabel-produktansicht.png?v=1785437724"},{"product_id":"audioquest-rocket-22-lautsprecherkabel","title":"AudioQuest Rocket 22 Speaker Cable","description":"\u003cp\u003eThe AudioQuest Rocket 22 is a made-to-order speaker cable with semi-solid True-Concentric conductors of Long-Grain Copper and Perfect-Surface Copper. It's the level at which the Rocket series stops being a mere accessory.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Rocket 22?\u003c\/h2\u003e\n\u003cp\u003eThe difference from the Rocket 11 lies in the metal and in an additional protective layer. The outer conductors are Perfect-Surface Copper, whose surface is drawn extremely smooth – and because high frequencies prefer to travel along the outside of a conductor, any roughness there has the strongest effect. Inside, it stays LGC. Add to that a carbon-based noise dissipation layer that drains high-frequency garbage before it overlays the music. At 12 AWG, the cable is also more robustly dimensioned.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou decide length and configuration: \u003cstrong\u003eFull-Range\u003c\/strong\u003e for speakers with one pair of terminals, \u003cstrong\u003eSingle-BiWire\u003c\/strong\u003e for speakers with separate tweeter and woofer connections. Termination is with SureGrip 300 connectors, in banana or spade. The price is per pair; single runs are made on request.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Rocket 22 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003ePlainly put: on a simple entry-level chain, the gap to the Rocket 11 stays small – then the smaller cable is the more sensible choice. Once amplifier and speakers really resolve, the 22 shows more refinement and a fuller midrange. Anyone wanting solid-core conductors and Double Star-Quad geometry ends up with the Rocket 33.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Rocket 22 is the sensible step up for systems that can show more than an entry-level cable lets through. \u003cstrong\u003e5\/5 stars – What Hi-Fi?, 2019.\u003c\/strong\u003e We're happy to honestly assess whether the extra cost pays off in your chain: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, made-to-order (Rocket series)\u003c\/li\u003e\n\u003cli\u003eConductors: semi-solid, True-Concentric, Perfect-Surface Copper (PSC) outer, Long-Grain Copper (LGC) inner\u003c\/li\u003e\n\u003cli\u003eCross-section: 12 AWG\u003c\/li\u003e\n\u003cli\u003eGeometry: twisted double spiral (Double Low-Inductance Twisted Pair), direction-optimized\u003c\/li\u003e\n\u003cli\u003eNoise dissipation: carbon-based\u003c\/li\u003e\n\u003cli\u003eInsulation: PVC, CL3\/FT4 (in-wall rated)\u003c\/li\u003e\n\u003cli\u003eConnectors: SureGrip 300, banana or spade, direct silver-plated\u003c\/li\u003e\n\u003cli\u003eConfigurations: Full-Range or Single-BiWire\u003c\/li\u003e\n\u003cli\u003eLengths: 2 m, 2.5 m, 3 m, 4 m (price per pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: made-to-order cable pair in the chosen length and configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does Perfect-Surface Copper change compared to pure LGC?\u003c\/h3\u003e\n\u003cp\u003eIt smooths the conductor surface. High frequencies tend to travel along the outside of a conductor, so irregularities there have an especially strong effect. PSC reduces exactly this disturbance – audible as a more open treble and a midrange with more substance rather than just more volume.\u003c\/p\u003e\n\u003ch3\u003eWhat's the carbon-based noise dissipation for?\u003c\/h3\u003e\n\u003cp\u003eIt drains high-frequency noise that would otherwise overlay the music signal. Carbon-containing material converts part of this energy into heat. In practice, you notice this as a quieter background against which quiet details don't disappear into the noise floor. The Rocket 11 lacks this layer.\u003c\/p\u003e\n\u003ch3\u003eCan I switch from Full-Range to Single-BiWire later?\u003c\/h3\u003e\n\u003cp\u003eOnly with a new termination: the two variants differ in how they're terminated, with four connectors instead of two at the speaker end. So think before ordering about whether your speakers have two pairs of terminals and whether you want to drive them separately. We're happy to run through it with you.\u003c\/p\u003e\n\u003ch3\u003eWhat speaks for buying the Rocket 22 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe match length, configuration and connector type to your specific devices and terminate in-house. On top of that, you get an honest assessment of whether your amplifier-speaker pairing actually shows the difference from the smaller Rocket. Call us, write on WhatsApp or by email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFitting partners for the Rocket 22: \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e, more \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and the complete \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m \/ Full-Range","offer_id":53019193049424,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true},{"title":"2 m \/ Single-BiWire","offer_id":53019193082192,"sku":null,"price":569.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Full-Range","offer_id":53019193114960,"sku":null,"price":549.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Single-BiWire","offer_id":53019193147728,"sku":null,"price":619.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Full-Range","offer_id":53019193180496,"sku":null,"price":599.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Single-BiWire","offer_id":53019193213264,"sku":null,"price":669.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Full-Range","offer_id":53019193246032,"sku":null,"price":699.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Single-BiWire","offer_id":53019193278800,"sku":null,"price":769.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-rocket-22-lautsprecherkabel-produktansicht.png?v=1785437725"},{"product_id":"audioquest-rocket-33-lautsprecherkabel","title":"AudioQuest Rocket 33 Speaker Cable","description":"\u003cp\u003eThe AudioQuest Rocket 33 is a made-to-order speaker cable with solid-core conductors of Perfect-Surface Copper and Long-Grain Copper in a Double Star-Quad geometry, complemented by carbon-based noise dissipation. This is where the Rocket series stops being a mere connector and becomes a component of the system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Rocket 33?\u003c\/h2\u003e\n\u003cp\u003eTwo things change fundamentally compared to the Rocket 22. First, the conductors are now solid: one wire per polarity instead of many strands, which eliminates strand interaction entirely. Second, two positive and two negative conductors sit in a Double Star-Quad arrangement, in which the magnetic fields largely cancel each other out. The insulation switches to foamed polyethylene with a high air content, and the negative conductors carry a carbon-loaded layer against RF interference.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eAs across the whole series, you choose length and configuration: \u003cstrong\u003eFull-Range\u003c\/strong\u003e or \u003cstrong\u003eSingle-BiWire\u003c\/strong\u003e. Termination is with SureGrip 300 in banana or spade. The price is per pair; single runs for center-channel or subwoofer use are made on request.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Rocket 33 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eHonestly: on an entry-level system, the Rocket 33 is overkill – that money is better spent on speakers there. From solid mid-range upward, though, it's the level at which a cable becomes genuinely audible within the system as a whole. At 14 AWG, it remains remarkably easy to route despite everything.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eSolid conductors, Double Star-Quad, carbon dissipation: the Rocket 33 is the point where a connection becomes a sonic component – dynamics and bass control take a clear step up. Whether your chain can exploit that, we're happy to assess with you: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, made-to-order (Rocket series)\u003c\/li\u003e\n\u003cli\u003eConductors: solid, Perfect-Surface Copper (PSC) and Long-Grain Copper (LGC)\u003c\/li\u003e\n\u003cli\u003eCross-section: 14 AWG\u003c\/li\u003e\n\u003cli\u003eGeometry: Double Star-Quad, direction-optimized\u003c\/li\u003e\n\u003cli\u003eNoise dissipation: carbon-based (carbon-loaded polyethylene on the negative conductors)\u003c\/li\u003e\n\u003cli\u003eInsulation: foamed polyethylene (Foamed-PE)\u003c\/li\u003e\n\u003cli\u003eDielectric-Bias System: not present\u003c\/li\u003e\n\u003cli\u003eConnectors: SureGrip 300, banana or spade, direct silver-plated\u003c\/li\u003e\n\u003cli\u003eConfigurations: Full-Range or Single-BiWire\u003c\/li\u003e\n\u003cli\u003eLengths: 2 m, 2.5 m, 3 m, 4 m (price per pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: made-to-order cable pair in the chosen length and configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat changes with solid conductors?\u003c\/h3\u003e\n\u003cp\u003eIn a stranded cable, the signal constantly switches between individual strands, generating distortion. A solid wire doesn't have this problem. The result is a cleaner soundstage with tighter bass – in exchange, the cable is somewhat stiffer than the semi-solid Rockets.\u003c\/p\u003e\n\u003ch3\u003eWhat does Double Star-Quad stand for?\u003c\/h3\u003e\n\u003cp\u003eAn arrangement of four conductors per run, with positive and negative diagonally opposite each other. The resulting magnetic fields largely cancel out, reducing inductance and susceptibility to interference. AudioQuest uses this geometry from the Rocket 33 upward; the smaller models use a twisted double spiral.\u003c\/p\u003e\n\u003ch3\u003eHow easily can the cable be routed behind the rack?\u003c\/h3\u003e\n\u003cp\u003eWith 14 AWG and foamed PE insulation, the Rocket 33 stays manageable, but it's stiffer than the Rocket 11 or 22. Allow some bend radius behind floorstanding speakers and the rack. In tight spaces, we'll tell you upfront which length makes sense.\u003c\/p\u003e\n\u003ch3\u003eWhat do you get from ordering the Rocket 33 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eTermination that matches your terminals, and an honest assessment of whether this level makes a difference in your system. We've worked with cables and speakers since the nineties and know the combinations where the effort pays off. Get in touch by phone, WhatsApp or email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAt this level, it's worth looking at the partners: \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amps\u003c\/a\u003e, more \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and the whole \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m \/ Full-Range","offer_id":53019193344336,"sku":null,"price":649.0,"currency_code":"CHF","in_stock":true},{"title":"2 m \/ Single-BiWire","offer_id":53019193377104,"sku":null,"price":719.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Full-Range","offer_id":53019193409872,"sku":null,"price":724.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Single-BiWire","offer_id":53019193442640,"sku":null,"price":794.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Full-Range","offer_id":53019193475408,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Single-BiWire","offer_id":53019193508176,"sku":null,"price":869.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Full-Range","offer_id":53019193540944,"sku":null,"price":949.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Single-BiWire","offer_id":53019193573712,"sku":null,"price":1019.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-rocket-33-lautsprecherkabel-produktansicht.png?v=1785437725"},{"product_id":"audioquest-rocket-44-lautsprecherkabel","title":"AudioQuest Rocket 44 Speaker Cable","description":"\u003cp\u003eThe AudioQuest Rocket 44 is a made-to-order high-end speaker cable with solid-core conductors of Perfect-Surface Copper+ and Perfect-Surface Copper, Double Star-Quad geometry and carbon-based noise dissipation. It's the level at which the Rocket series starts talking on equal terms with considerably more expensive cables.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Rocket 44?\u003c\/h2\u003e\n\u003cp\u003ePurity increases: PSC+ undergoes an additional treatment that further reduces grain boundaries and surface roughness, complemented by PSC conductors in the same bundle. Cross-section grows to 13 AWG compared with the Rocket 33, the Double Star-Quad arrangement remains, and alongside the carbon-loaded layer on the negative conductors there's now an outer carbon layer around the conductor pair. What ultimately stands out is less a new sound than the quiet between the notes.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou choose length and configuration: \u003cstrong\u003eFull-Range\u003c\/strong\u003e or \u003cstrong\u003eSingle-BiWire\u003c\/strong\u003e. From this level up, the larger SureGrip 500 connectors are used, in banana or multi-spade. The price is per pair; single runs are made to order on request.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Rocket 44 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003ePlainly put: on an entry-level system, the effort evaporates – the smaller Rockets are entirely sufficient there. The 44 shows its strengths on high-resolution floorstanding speakers and powerful amplifiers: calm, control, a three-dimensional soundstage. Anyone who also wants the Dielectric-Bias System has to reach for the Rocket 88.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Rocket 44 plays with authority and ease and lets nothing slip past demanding speakers. Whether your chain exploits this level, we'll tell you honestly – tell us about your room and your devices: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, made-to-order (Rocket series)\u003c\/li\u003e\n\u003cli\u003eConductors: solid, Perfect-Surface Copper+ (PSC+) and Perfect-Surface Copper (PSC)\u003c\/li\u003e\n\u003cli\u003eCross-section: 13 AWG\u003c\/li\u003e\n\u003cli\u003eGeometry: Double Star-Quad, direction-optimized\u003c\/li\u003e\n\u003cli\u003eNoise dissipation: carbon-based, inside on the negative conductors and outside around the conductor pair\u003c\/li\u003e\n\u003cli\u003eInsulation: foamed polyethylene (Foamed-PE)\u003c\/li\u003e\n\u003cli\u003eDielectric-Bias System: not present (only on the Rocket 88 in this series)\u003c\/li\u003e\n\u003cli\u003eConnectors: SureGrip 500, banana or multi-spade\u003c\/li\u003e\n\u003cli\u003eConfigurations: Full-Range or Single-BiWire\u003c\/li\u003e\n\u003cli\u003eLengths: 2 m, 2.5 m, 3 m, 4 m (price per pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: made-to-order cable pair in the chosen length and configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow much does PSC+ differ from PSC?\u003c\/h3\u003e\n\u003cp\u003ePSC+ is given additional treatment and has fewer grain boundaries and a smoother surface than PSC. In the Rocket 44, both materials work side by side. The effect isn't a different tonal character but less disturbance: more fine resolution and a quieter background on suitably resolving systems.\u003c\/p\u003e\n\u003ch3\u003eHow does SureGrip 500 differ from SureGrip 300?\u003c\/h3\u003e\n\u003cp\u003eThe 500 connectors are more generously dimensioned and built for the Rocket 44's larger cross-section. They're cold-welded rather than soldered and are direct silver- or gold-plated with no nickel underlayer. We'll clarify with you before termination which variant fits your terminals.\u003c\/p\u003e\n\u003ch3\u003eIs the extra cost over the Rocket 33 worth it?\u003c\/h3\u003e\n\u003cp\u003eOn high-quality, resolving systems, yes: PSC+, the larger cross-section and the additional outer carbon layer bring more calm and three-dimensionality. On mid-range chains, the gap is smaller. Describe your devices and we'll assess it for your case.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Rocket 44 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause at this price level we don't just ship it – we think it through with you: the right length, correct termination, clean assembly by our own technician. And if a smaller cable would serve your system just as well, we'll tell you that too. Phone, WhatsApp and email are all open.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFitting for this league: \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amps\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/vorverstarker\"\u003epreamplifiers\u003c\/a\u003e plus more \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m \/ Full-Range","offer_id":53019193835856,"sku":null,"price":839.0,"currency_code":"CHF","in_stock":true},{"title":"2 m \/ Single-BiWire","offer_id":53019193868624,"sku":null,"price":989.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Full-Range","offer_id":53019193901392,"sku":null,"price":949.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Single-BiWire","offer_id":53019193934160,"sku":null,"price":1099.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Full-Range","offer_id":53019193966928,"sku":null,"price":1059.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Single-BiWire","offer_id":53019193999696,"sku":null,"price":1209.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Full-Range","offer_id":53019194032464,"sku":null,"price":1279.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Single-BiWire","offer_id":53019194065232,"sku":null,"price":1429.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-rocket-44-lautsprecherkabel-produktansicht.png?v=1785437725"},{"product_id":"audioquest-rocket-88-lautsprecherkabel","title":"AudioQuest Rocket 88 Speaker Cable","description":"\u003cp\u003eThe AudioQuest Rocket 88 is the flagship of the Rocket series: a made-to-order speaker cable with solid Perfect-Surface Copper+ conductors, Double Star-Quad geometry, carbon-based noise dissipation and a 72-volt Dielectric-Bias System. It brings technology from AudioQuest's upper series into a price class where you don't otherwise find it.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Rocket 88?\u003c\/h2\u003e\n\u003cp\u003eThe DBS is the real difference. A small battery applies 72 volts DC to the insulating material and polarizes it permanently – the dielectric stays, so to speak, in a settled state and influences the signal less. An RF trap prevents high frequency from traveling back into the signal via this path. Below that, the same ingredients as the Rocket 44 are at work, just consistently unified on PSC+.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou choose length and configuration: \u003cstrong\u003eFull-Range\u003c\/strong\u003e or \u003cstrong\u003eSingle-BiWire\u003c\/strong\u003e, terminated with SureGrip 500 connectors in banana or multi-spade. The DBS modules are permanently attached to the cable and work without a mains connection. The price is per pair; single runs are made on request.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Rocket 88 suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eHonestly: on a simple system, you're paying for technology whose effect you can barely access – the Rocket 22 or 33 are the smarter choice there. On a genuinely resolving chain, though, the 88 is a price-performance standout that makes some considerably pricier cables look uncomfortably dated.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eSensible high-end: DBS technology, PSC+ and Double Star-Quad at a price that stays surprisingly down-to-earth. For serious systems, our clear recommendation. Tell us about your speakers and we'll tell you whether the step is worth it: HD Zürisee in Wädenswil, 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, made-to-order (Rocket series, flagship)\u003c\/li\u003e\n\u003cli\u003eConductors: solid, Perfect-Surface Copper+ (PSC+)\u003c\/li\u003e\n\u003cli\u003eCross-section: 13 AWG\u003c\/li\u003e\n\u003cli\u003eGeometry: Double Star-Quad, direction-optimized\u003c\/li\u003e\n\u003cli\u003eNoise dissipation: carbon-based, inside on the negative conductors and outside around the conductor pair\u003c\/li\u003e\n\u003cli\u003eDielectric-Bias System: 72 V, with RF trap\u003c\/li\u003e\n\u003cli\u003eInsulation: foamed polyethylene (Foamed-PE)\u003c\/li\u003e\n\u003cli\u003eConnectors: SureGrip 500, banana or multi-spade\u003c\/li\u003e\n\u003cli\u003eConfigurations: Full-Range or Single-BiWire\u003c\/li\u003e\n\u003cli\u003eLengths: 2 m, 2.5 m, 3 m, 4 m (price per pair)\u003c\/li\u003e\n\u003cli\u003eIncluded: made-to-order cable pair with permanently fitted DBS modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need to charge or plug in the DBS?\u003c\/h3\u003e\n\u003cp\u003eNo. The battery in the DBS module doesn't supply current to the music signal; it only maintains a voltage on the insulating material. It therefore lasts correspondingly long. A test button on the module shows you the charge state; if it's ever depleted, the cable simply continues to work as a normal speaker cable.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the Rocket 88 and the Rocket 44?\u003c\/h3\u003e\n\u003cp\u003eAbove all, the 72-volt DBS, which the Rocket 44 lacks. The 88 also uses PSC+ throughout, while the 44 combines PSC+ and PSC. Cross-section, Double Star-Quad geometry and carbon dissipation are the same on both. The difference shows up mainly as extra quiet in the background.\u003c\/p\u003e\n\u003ch3\u003eIs the Rocket 88 also available as a single run for a center channel or subwoofer?\u003c\/h3\u003e\n\u003cp\u003eYes, on request. The regular price applies to a pair; a single made-to-order run is priced separately. For active subwoofers, though, you usually need an RCA or XLR cable rather than a speaker cable. Tell us how your subwoofer is connected.\u003c\/p\u003e\n\u003ch3\u003eWhat do you get from buying the Rocket 88 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eAdvice that comes before the purchase: we check whether your chain can actually exploit the DBS technology, and otherwise suggest the more fitting model. We do the termination in-house, including special lengths. Questions go to 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor the surroundings of a flagship model: \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amps\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/netzkabel\"\u003epower cables\u003c\/a\u003e and more \u003ca href=\"\/en\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e – or go straight to the \u003ca href=\"\/en\/collections\/audioquest\"\u003eAudioQuest world\u003c\/a\u003e.\u003c\/p\u003e","brand":"AudioQuest","offers":[{"title":"2 m \/ Full-Range","offer_id":53019195179344,"sku":null,"price":1299.0,"currency_code":"CHF","in_stock":true},{"title":"2 m \/ Single-BiWire","offer_id":53019195212112,"sku":null,"price":1449.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Full-Range","offer_id":53019195244880,"sku":null,"price":1449.0,"currency_code":"CHF","in_stock":true},{"title":"2.5 m \/ Single-BiWire","offer_id":53019195277648,"sku":null,"price":1599.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Full-Range","offer_id":53019195310416,"sku":null,"price":1599.0,"currency_code":"CHF","in_stock":true},{"title":"3 m \/ Single-BiWire","offer_id":53019195343184,"sku":null,"price":1749.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Full-Range","offer_id":53019195375952,"sku":null,"price":1899.0,"currency_code":"CHF","in_stock":true},{"title":"4 m \/ Single-BiWire","offer_id":53019195408720,"sku":null,"price":2049.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/audioquest-rocket-88-lautsprecherkabel-produktansicht.png?v=1785437724"},{"product_id":"viablue-sc-2-lautsprecherkabel","title":"ViaBlue SC-2 Speaker Cable","description":"\u003ch3\u003eViaBlue SC-2 Speaker Cable\u003c\/h3\u003e\u003cp\u003eThe clean entry point into genuine ViaBlue quality: the SC-2 is a high-quality OFC speaker cable, ready-made with solid, screw-on T8 banana connectors – you don't have to worry about anything except listening. Available in the classic Cobra braid or understated black.\u003c\/p\u003e\u003cp\u003eReady-to-use stereo pairs in the length that fits your setup – from 1.5 to 7.5 metres.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat lengths is the SC-2 available in?\u003c\/h3\u003e\u003cp\u003eAs ready-made stereo pairs in 150, 250, 300, 400, 500 and 750 centimetres. Order the length you actually need, and add a bit of extra for the bend behind the rack. Measuring too tight is the most common mistake with speaker cables – half a metre of slack has never hurt anyone.\u003c\/p\u003e\u003ch3\u003eWhich connectors are fitted?\u003c\/h3\u003e\u003cp\u003eSolid T8 banana connectors from ViaBlue, screwed rather than soldered. They fit the standard four-millimetre sockets found on practically every amplifier and speaker. If your terminals only accept spade connectors or bare wire, you need a different version – just ask us before ordering.\u003c\/p\u003e\u003ch3\u003eCan I use the SC-2 for bi-wiring?\u003c\/h3\u003e\u003cp\u003eNo, the SC-2 comes as a single-wire pair. For genuine bi-wiring, go for the SC-4 or the SC-6 AIR, which are available in a bi-wire version. If your speaker has a double terminal and you're still running single-wire, just leave the factory bridges between the terminal pairs in place.\u003c\/p\u003e\u003ch3\u003eDoes a better speaker cable actually make a difference?\u003c\/h3\u003e\u003cp\u003eMainly as a solid, durable connection – not as a sonic miracle. A decent cross-section and firmly screwed connectors keep contact resistance and loose connections to a minimum, and the gold-plated contacts don't oxidise. That's the real benefit. If you expect miracles, you'll be disappointed; if you want a reliable connection, this is the right choice.\u003c\/p\u003e\u003ch3\u003eWhy buy the ViaBlue SC-2 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we tell you in advance which length and connector type suit your equipment – and we'll also hold you back if a pricier cable won't make a difference in your setup. HD Zürisee in Wädenswil is an experienced specialist team with its own in-house technician. Call, email, or message us on WhatsApp.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"150 cm \/ Cobra","offer_id":53023204704592,"sku":"VIA10001","price":380.0,"currency_code":"CHF","in_stock":true},{"title":"250 cm \/ Cobra","offer_id":53023204737360,"sku":"VIA10005","price":460.0,"currency_code":"CHF","in_stock":true},{"title":"250 cm \/ Black","offer_id":53023204770128,"sku":"VIA10006","price":460.0,"currency_code":"CHF","in_stock":true},{"title":"300 cm \/ Cobra","offer_id":53023204802896,"sku":"VIA10009","price":500.0,"currency_code":"CHF","in_stock":true},{"title":"400 cm \/ Cobra","offer_id":53023204835664,"sku":"VIA10013","price":580.0,"currency_code":"CHF","in_stock":true},{"title":"500 cm \/ Cobra","offer_id":53023204868432,"sku":"VIA10017","price":660.0,"currency_code":"CHF","in_stock":true},{"title":"750 cm \/ Cobra","offer_id":53023204901200,"sku":"VIA10021","price":860.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-sc-2-lautsprecherkabel-cobra-paaransicht.jpg?v=1787060964"},{"product_id":"viablue-sc-4-lautsprecherkabel","title":"ViaBlue SC-4 Speaker Cable","description":"\u003ch3\u003eViaBlue SC-4 Speaker Cable\u003c\/h3\u003e\u003cp\u003eThe golden middle of the ViaBlue range: more cross-section, more authority. The SC-4 comes as single-wire or genuine bi-wire, with solid T8 banana or T8 spade connectors – all ready-made and cleanly terminated. Matching jumpers are also available if you want to bridge bi-wire terminals.\u003c\/p\u003e\u003cp\u003eChoose the version and length to match your speakers and amplifiers.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat versions of the SC-4 are available?\u003c\/h3\u003e\u003cp\u003eFour: single-wire with T8 banana connectors, single-wire with T8 spade connectors, genuine bi-wire with banana connectors, and short jumpers with banana connectors for double terminals. Everything comes ready-made and cleanly terminated. Which version suits you depends on your speaker terminal – check whether it has banana sockets or screw clamps for spade connectors.\u003c\/p\u003e\u003ch3\u003eWhat does genuine bi-wire mean, and do I need it?\u003c\/h3\u003e\u003cp\u003eGenuine bi-wire means separate conductor pairs from the amplifier all the way to the speaker – so four connections at the speaker instead of two. This only makes sense if your speaker has a double terminal. If it only has one pair of terminals, go with single-wire – bi-wire simply won't do anything for you in that case.\u003c\/p\u003e\u003ch3\u003eWhat lengths is the SC-4 available in?\u003c\/h3\u003e\u003cp\u003eAs a stereo pair in 150, 250, 300, 400, 500 and 750 centimetres; the jumpers come in 10 and 15 centimetres. Measure the path along the wall rather than as the crow flies, and add some extra for the bend behind the speaker. Both channels get the same length.\u003c\/p\u003e\u003ch3\u003eWhat are the jumpers for?\u003c\/h3\u003e\u003cp\u003eThey replace the metal bridges that connect the two terminal pairs at the factory on a bi-wire terminal. If you're running single-wire, the entire signal passes through this bridge – a short cable of the same quality is the more consistent solution. We'll quickly clarify how many pieces your terminal needs beforehand.\u003c\/p\u003e\u003ch3\u003eWhy buy the ViaBlue SC-4 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause the choice between single-wire, bi-wire, banana connector and spade is settled in five minutes of advice instead of two returns. We know the terminals of common speakers and tell you honestly if bi-wire won't help in your case. HD Zürisee in Wädenswil: a call, email or WhatsApp message is all it takes.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"Single-Wire Banana \/ 150 cm \/ Cobra","offer_id":53023205130576,"sku":"VIA10101","price":470.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 250 cm \/ Cobra","offer_id":53023205163344,"sku":"VIA10105","price":575.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 300 cm \/ Cobra","offer_id":53023205196112,"sku":"VIA10109","price":630.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 400 cm \/ Cobra","offer_id":53023205228880,"sku":"VIA10113","price":735.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 500 cm \/ Cobra","offer_id":53023205261648,"sku":"VIA10117","price":840.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 750 cm \/ Cobra","offer_id":53023205294416,"sku":"VIA10121","price":1050.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 150 cm \/ Cobra","offer_id":53023205327184,"sku":"VIA10126","price":490.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 250 cm \/ Cobra","offer_id":53023205359952,"sku":"VIA10130","price":595.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 300 cm \/ Cobra","offer_id":53023205392720,"sku":"VIA10134","price":650.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 400 cm \/ Cobra","offer_id":53023205425488,"sku":"VIA10138","price":723.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 150 cm \/ Cobra","offer_id":53023205458256,"sku":"VIA10201","price":575.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 250 cm \/ Cobra","offer_id":53023205491024,"sku":"VIA10205","price":680.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 300 cm \/ Cobra","offer_id":53023205523792,"sku":"VIA10209","price":735.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 300 cm \/ Black","offer_id":53023205556560,"sku":"VIA10210","price":735.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 400 cm \/ Cobra","offer_id":53023205589328,"sku":"VIA10213","price":840.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 500 cm \/ Cobra","offer_id":53023205622096,"sku":"VIA10217","price":940.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 750 cm \/ Cobra","offer_id":53023205654864,"sku":"VIA10221","price":1155.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana \/ 10 cm \/ Rot-Schwarz","offer_id":53023205687632,"sku":"VIA10901","price":260.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana \/ 15 cm \/ Rot-Schwarz","offer_id":53023205720400,"sku":"VIA10905","price":275.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Spade \/ 10 cm \/ Rot-Schwarz","offer_id":53549238255952,"sku":"VIA10914","price":275.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Spade \/ 15 cm \/ Rot-Schwarz","offer_id":53549238288720,"sku":"VIA10918","price":290.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-sc-4-lautsprecherkabel-cobra-paaransicht.jpg?v=1787061184"},{"product_id":"viablue-sc-6-air-lautsprecherkabel","title":"ViaBlue SC-6 AIR Speaker Cable","description":"\u003ch3\u003eViaBlue SC-6 AIR Speaker Cable\u003c\/h3\u003e\u003cp\u003eThe reference of the range: maximum cross-section for demanding speakers and powerful amplifiers. The SC-6 AIR delivers control and calm right down into the deep bass – single-wire or genuine bi-wire, with solid T8 banana or T8 spade connectors, ready-made. Matching jumpers for bi-wire terminals are also available.\u003c\/p\u003e\u003cp\u003eChoose the version and length – from compact up to 7.5 metres.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich systems is the SC-6 AIR worthwhile for?\u003c\/h3\u003e\u003cp\u003eFor demanding speakers on powerful amplifiers and for long cable runs. The large cross-section keeps line resistance low, which is especially noticeable as control in the deep bass. On a compact bookshelf speaker with a short run, on the other hand, the effort is hardly justified – SC-2 or SC-4 are enough there.\u003c\/p\u003e\u003ch3\u003eWhat versions and lengths are available?\u003c\/h3\u003e\u003cp\u003eSingle-wire with T8 banana connectors or T8 spade connectors, genuine bi-wire with banana connectors, and jumpers in both connector types. The stereo pairs run from 150 to 750 centimetres, the jumpers measure 15 centimetres. Everything comes ready-made – you don't need to strip, solder, or terminate anything yourself.\u003c\/p\u003e\u003ch3\u003eDo I need the bi-wire version?\u003c\/h3\u003e\u003cp\u003eOnly if your speaker has a double terminal with four clamps. With a single pair of clamps, bi-wire doesn't help. If you have a double terminal but want to run single-wire, it makes sense to replace the factory bridges with the matching jumpers from the same range – the same material all the way through.\u003c\/p\u003e\u003ch3\u003eWill the thick cable fit behind my speakers?\u003c\/h3\u003e\u003cp\u003eYou should check this before ordering. A large cross-section means a large bending radius, and the solid T8 connectors add further length on top. If your speaker stands close to the wall, it will be tight – and nobody wants a sharply kinked cable. Measure the distance beforehand.\u003c\/p\u003e\u003ch3\u003eWhy buy the ViaBlue SC-6 AIR from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we tell you whether your system actually needs the large cross-section – or whether the money is better spent elsewhere. At HD Zürisee in Wädenswil we advise on system combinations, terminals and cable routing, and our technician can handle the on-site installation on request.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"Single-Wire Banana \/ 250 cm \/ Cobra","offer_id":53023206834512,"sku":"VIA10405","price":1530.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 300 cm \/ Cobra","offer_id":53023206867280,"sku":"VIA10409","price":1700.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 400 cm \/ Cobra","offer_id":53023206900048,"sku":"VIA10413","price":1980.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 500 cm \/ Cobra","offer_id":53023206932816,"sku":"VIA10417","price":2280.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 750 cm \/ Cobra","offer_id":53023206965584,"sku":"VIA10421","price":2930.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 150 cm \/ Cobra","offer_id":53023206998352,"sku":"VIA10426","price":1250.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 250 cm \/ Cobra","offer_id":53023207031120,"sku":"VIA10430","price":1560.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 300 cm \/ Cobra","offer_id":53023207063888,"sku":"VIA10434","price":1730.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 150 cm \/ Cobra","offer_id":53023207096656,"sku":"VIA10451","price":1335.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 250 cm \/ Cobra","offer_id":53023207129424,"sku":"VIA10455","price":1640.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 300 cm \/ Cobra","offer_id":53023207162192,"sku":"VIA10459","price":1800.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 400 cm \/ Cobra","offer_id":53023207194960,"sku":"VIA10463","price":2085.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 500 cm \/ Cobra","offer_id":53023207227728,"sku":"VIA10467","price":2385.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 750 cm \/ Cobra","offer_id":53023207260496,"sku":"VIA10471","price":3035.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana \/ 15 cm \/ Rot-Schwarz","offer_id":53023207293264,"sku":"VIA10905","price":275.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Spade \/ 15 cm \/ Rot-Schwarz","offer_id":53023207326032,"sku":"VIA10918","price":290.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana \/ 20 cm \/ Cobra","offer_id":53549238321488,"sku":"VIA10911","price":400.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana\/Spade \/ 20 cm \/ Cobra","offer_id":53549238354256,"sku":"VIA10937","price":410.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Spade \/ 20 cm \/ Cobra","offer_id":53582409302352,"sku":"VIA10924","price":415.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Spade \/ 20 cm \/ Black","offer_id":53582409335120,"sku":"VIA10925","price":415.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana \/ 20 cm \/ Black","offer_id":53582409367888,"sku":"VIA10912","price":400.0,"currency_code":"CHF","in_stock":true},{"title":"Jumper Banana\/Spade \/ 20 cm \/ Black","offer_id":53582409400656,"sku":"VIA10938","price":410.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 150 cm \/ Cobra","offer_id":53582441414992,"sku":"VIA10401","price":1220.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 150 cm \/ Black","offer_id":53582441447760,"sku":"VIA10402","price":1220.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 250 cm \/ Black","offer_id":53582441480528,"sku":"VIA10406","price":1530.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 300 cm \/ Black","offer_id":53582441513296,"sku":"VIA10410","price":1700.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 400 cm \/ Black","offer_id":53582441546064,"sku":"VIA10414","price":1980.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 500 cm \/ Black","offer_id":53582441578832,"sku":"VIA10418","price":2280.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Banana \/ 750 cm \/ Black","offer_id":53582441611600,"sku":"VIA10422","price":2930.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 150 cm \/ Black","offer_id":53582441644368,"sku":"VIA10427","price":1250.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 250 cm \/ Black","offer_id":53582441677136,"sku":"VIA10431","price":1560.0,"currency_code":"CHF","in_stock":true},{"title":"Single-Wire Spade \/ 300 cm \/ Black","offer_id":53582441709904,"sku":"VIA10435","price":1730.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 150 cm \/ Black","offer_id":53582441742672,"sku":"VIA10452","price":1335.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 250 cm \/ Black","offer_id":53582441775440,"sku":"VIA10456","price":1640.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 300 cm \/ Black","offer_id":53582441808208,"sku":"VIA10460","price":1800.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 400 cm \/ Black","offer_id":53582441840976,"sku":"VIA10464","price":2085.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 500 cm \/ Black","offer_id":53582441873744,"sku":"VIA10468","price":2385.0,"currency_code":"CHF","in_stock":true},{"title":"Bi-Wire Banana \/ 750 cm \/ Black","offer_id":53582441906512,"sku":"VIA10472","price":3035.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-sc-6-air-lautsprecherkabel-cobra-paaransicht.jpg?v=1787065850"},{"product_id":"vincent-high-end-lautsprecherkabel-single-wire","title":"Vincent Speaker Cable Single-Wire, OFC","description":"\u003cp\u003eThe Vincent Speaker Cable Single-Wire is a pre-terminated speaker cable made of OFC copper, with connectors that can be swapped between spade and banana plug.\u003c\/p\u003e\u003cp\u003eBetween amplifier and speaker lies the final stretch of the signal chain – and, of all places, that's where an astonishing number of systems still have the bundled cable from the hardware store. Let's be honest: that's worth changing.\u003c\/p\u003e\u003ch2\u003eWhy the Vincent Single-Wire?\u003c\/h2\u003e\u003cp\u003eThe idea behind it is down-to-earth. A decent conductor cross-section of oxygen-free OFC copper, cleanly terminated, ready to connect. No stripping, no twisting, no strands loosening in the terminal over the years.\u003c\/p\u003e\u003cp\u003eThe real highlight is the interchangeable connectors: spade or banana, depending on what your amplifier and speakers offer. You decide at the device, not at purchase – and if your next speakers have different terminals, the cable is still in the race.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA pre-terminated pair in four lengths, from 2× 1.5 m for close placement up to 2× 5 m, when the speakers stand far apart or the amplifier sits off to the side.\u003c\/p\u003e\u003cp\u003eImportant: use the same length for both sides, even if one speaker is closer. The extra metre can happily coil up behind the sideboard – what matters is that both channels see the same distance.\u003c\/p\u003e\u003ch3\u003eWho is the Single-Wire suited to?\u003c\/h3\u003e\u003cp\u003eFor anyone with standard speaker terminals, i.e. one connection pair per speaker – which is the large majority. Anyone building a solid system – say, a Vincent SV-237 MK II with a pair of floorstanding speakers – gets a clean connection here without excess price.\u003c\/p\u003e\u003cp\u003eTo be blunt: if your speaker has two connection pairs and you actually want to run bi-wiring, you need the bi-wire version. And anyone wanting to spend more on the cable than on the amplifier is definitely in the wrong place here – there are other addresses for that.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe cable you recommend without much deliberation. It noticeably lifts the connection above hardware-store level, is decently made, and doesn't cost the earth. At HD Zürisee in Wädenswil, it's one of the cables we install most often ourselves.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: pre-terminated speaker cable, single-wire\u003c\/li\u003e\n\u003cli\u003eConductor: OFC copper (oxygen-free)\u003c\/li\u003e\n\u003cli\u003eConnectors: interchangeable spade or banana plugs\u003c\/li\u003e\n\u003cli\u003eConfiguration: pair (2 cables, for both speakers)\u003c\/li\u003e\n\u003cli\u003eAvailable lengths: 2× 1.5 m, 2× 2 m, 2× 3 m, 2× 5 m\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eScope of delivery: two pre-terminated cables including interchangeable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between single-wire and bi-wire?\u003c\/h3\u003e\u003cp\u003eSingle-wire runs one cable pair per speaker and connects to one pair of terminals. Bi-wire splits the tweeter and woofer sections onto two separate conductor pairs and requires speakers with two connection pairs. If your speaker has only one terminal, single-wire is the correct and only choice.\u003c\/p\u003e\u003ch3\u003eWhich length do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the longer of the two runs and use that length for both sides. Cables of different lengths on the left and right make barely any audible difference, but they're unnecessary. A bit of slack never hurts – a cable under tension pulls on the terminal.\u003c\/p\u003e\u003ch3\u003eSpade or banana plug – which should I choose?\u003c\/h3\u003e\u003cp\u003eThat depends on your devices. Bananas plug in faster and are more practical day to day. Spades offer more contact area and sit rock solid. With the Vincent, both are included and interchangeable, so you don't need to commit at purchase.\u003c\/p\u003e\u003ch3\u003eDoes the cable fit any amplifier?\u003c\/h3\u003e\u003cp\u003eYes, as long as the amplifier has standard screw terminals or banana sockets – so practically always. Brand doesn't matter. Only with devices that have unusual terminals is a quick check worthwhile beforehand, and we're happy to sort that out together.\u003c\/p\u003e\u003ch3\u003eWhy buy the Vincent speaker cable from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we tell you which length and which connector suit your room and your devices – and where extra budget achieves more than spending it on the cable. We've been putting together systems for decades. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eTake a look at our \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent collection\u003c\/a\u003e, our \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/kabel\"\u003ecable overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"2× 1.5 m","offer_id":53267090080080,"sku":null,"price":320.0,"currency_code":"CHF","in_stock":true},{"title":"2× 2.0 m","offer_id":53267090964816,"sku":null,"price":370.0,"currency_code":"CHF","in_stock":true},{"title":"2× 3.0 m","offer_id":53267090997584,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"2× 5.0 m","offer_id":53267091030352,"sku":null,"price":490.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-lautsprecherkabel-single-wire-ofc-produktansicht.png?v=1787062003"},{"product_id":"vincent-high-end-lautsprecherkabel-bi-wire","title":"Vincent Speaker Cable Bi-Wire, OFC Copper","description":"\u003cp\u003eThe Vincent Speaker Cable Bi-Wire is a pre-terminated speaker cable made of OFC copper that feeds your speaker's tweeter and woofer sections via separate conductors.\u003c\/p\u003e\u003cp\u003eBi-wiring is one of those topics that reliably sets HiFi forums ablaze. We keep it pragmatic: if your speaker has two connection pairs and you want to use them anyway, a cleanly made bi-wire cable is the more elegant solution than two bundled cables plus jumper plates.\u003c\/p\u003e\u003ch2\u003eWhy the Vincent Bi-Wire?\u003c\/h2\u003e\u003cp\u003eThe construction is unspectacular in the best sense: OFC copper, a decent cross-section, cleanly terminated. Each speaker is connected via two separate conductor pairs, with the tweeter and woofer sections getting their own path from the amplifier.\u003c\/p\u003e\u003cp\u003eAs with the single-wire, the connectors here are also interchangeable – spade or banana plug, whatever the terminal calls for. Handy, since bi-wire terminals often mix the two.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA ready-made pair in four lengths from 2× 1.5 m to 2× 5 m, terminated and ready to connect. No fiddling, no stripping, no loose strands oxidising in the terminal after two years.\u003c\/p\u003e\u003cp\u003eAnd yes: the jumpers between the terminals need to come out. Anyone who leaves them in has bought a bi-wire cable and connected it as single-wire – it happens more often than you'd think.\u003c\/p\u003e\u003ch3\u003eWho is the Bi-Wire suited to?\u003c\/h3\u003e\u003cp\u003eFor speakers with two connection pairs, i.e. a bi-wiring-capable terminal. Many floorstanding and higher-end bookshelf speakers offer this. If you have that option and want to make the most of it, this is the clean way to do it.\u003c\/p\u003e\u003cp\u003eTo be blunt: if your speaker has only one connection pair, bi-wire won't do anything for you – get the single-wire. And honestly, the difference between a good single-wire and a good bi-wire is rarely the big leap some people promise. Anyone with both terminals can make use of it. Anyone without isn't missing anything dramatic.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA cleanly made cable for anyone who genuinely wants to use their bi-wire terminals – without the wiring suddenly costing more than the speaker. At HD Zürisee in Wädenswil, we first work out together whether bi-wiring even makes sense in your case. Sometimes the honest answer is: no.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: pre-terminated speaker cable, bi-wire\u003c\/li\u003e\n\u003cli\u003eConductor: OFC copper (oxygen-free)\u003c\/li\u003e\n\u003cli\u003eConnectors: interchangeable spade or banana plugs\u003c\/li\u003e\n\u003cli\u003eConfiguration: pair (2 cables, for both speakers)\u003c\/li\u003e\n\u003cli\u003eRequirement: speakers with two connection pairs (bi-wire terminal)\u003c\/li\u003e\n\u003cli\u003eAvailable lengths: 2× 1.5 m, 2× 2 m, 2× 3 m, 2× 5 m\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eScope of delivery: two pre-terminated cables including interchangeable connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does bi-wiring actually achieve?\u003c\/h3\u003e\u003cp\u003eThe tweeter and woofer sections are fed from the amplifier via separate conductors instead of sharing one path. In practice, many report a bit more calmness and control in the bass. It's not a quantum leap – anyone promising you that is exaggerating. Speakers with two connection pairs are required.\u003c\/p\u003e\u003ch3\u003eDo I absolutely need bi-wire if my speaker supports it?\u003c\/h3\u003e\u003cp\u003eNo. A speaker with a bi-wire terminal works perfectly fine on a single-wire cable with the jumpers left in place. Bi-wiring is an option, not an obligation. If you want to use it, do it properly – a half-hearted setup achieves nothing.\u003c\/p\u003e\u003ch3\u003eDo I have to remove the jumpers on the speaker?\u003c\/h3\u003e\u003cp\u003eYes, absolutely. If the jumpers or plates between the terminals stay in place, the two sections are reconnected and the bi-wire setup is rendered ineffective. This is the most common mistake when connecting – check quickly before you wonder why.\u003c\/p\u003e\u003ch3\u003eSpade or banana?\u003c\/h3\u003e\u003cp\u003eBoth are included and interchangeable. Banana plugs are more practical day to day, spades offer more contact area. With bi-wire terminals you can also mix the two if space gets tight. You don't have to commit at purchase.\u003c\/p\u003e\u003ch3\u003eWhy buy the Vincent Bi-Wire cable from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we tell you honestly beforehand whether bi-wiring pays off with your speakers – and when you're better off investing your money elsewhere. Our technician Mauri will also install it cleanly on-site for you on request. Call us or write to us.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eTake a look at our \u003ca href=\"\/en\/collections\/vincent\"\u003eVincent collection\u003c\/a\u003e, our \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/kabel\"\u003ecable overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vincent","offers":[{"title":"2× 1.5 m","offer_id":53267092111696,"sku":null,"price":320.0,"currency_code":"CHF","in_stock":true},{"title":"2× 2.0 m","offer_id":53267092603216,"sku":null,"price":370.0,"currency_code":"CHF","in_stock":true},{"title":"2× 3.0 m","offer_id":53267092635984,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"2× 5.0 m","offer_id":53267092668752,"sku":null,"price":490.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vincent-lautsprecherkabel-bi-wire-ofc-kupfer-produktansicht.png?v=1787062082"},{"product_id":"gatoaudioftcwhite","title":"Gato Audio FTC White Speaker Cable","description":"\u003cp\u003eThe Gato Audio FTC White is a Danish speaker cable built for one job: getting the signal from amplifier to speaker with as little of its own character as possible.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio FTC White?\u003c\/h2\u003e\u003cp\u003eBecause a cable shouldn't be the weak link in an otherwise carefully assembled chain. The FTC White uses silver-plated, oxygen-free copper (OFC) conductors in a low-capacitance geometry, which keeps the signal path clean across the audible frequency range without adding its own tonal colouration. The white outer sheath is a deliberate choice too – it sits visibly against dark floors and furniture instead of disappearing into the shadows behind the rack, for anyone who'd rather see their cabling than hide it.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eIdeally: nothing extra. A good speaker cable doesn't add warmth, doesn't add sparkle – it gets out of the way. With the FTC White, that shows up as a slightly tighter bass and a touch more resolution in the treble compared to a generic bulk cable, particularly noticeable on systems that were already resolving well beforehand.\u003c\/p\u003e\u003ch3\u003eWho is the FTC White suited for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: if your system is entry-level or your amplifier and speakers are the current bottleneck, better cabling won't be what moves the needle – save the budget for there first. The FTC White earns its keep once the rest of the chain is already resolving detail worth preserving.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA clean, honestly engineered speaker cable that does its job without drama, and looks tidy doing it in white. Tell us about your system and the length you need – we at HD Zürisee in Wädenswil will help you pick the right run and terminate it properly.\u003c\/p\u003e\u003ch2\u003eTechnical Data – Gato Audio FTC White\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e speaker cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e silver-plated, oxygen-free copper (OFC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e low-capacitance geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSheath colour:\u003c\/strong\u003e white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat length of FTC White do I need?\u003c\/h3\u003e\u003cp\u003eThat depends on where your amplifier sits relative to the speakers. Measure the actual run, add a bit of slack for movement, and avoid excess coiled cable – we're glad to help you work out the right length for your room.\u003c\/p\u003e\u003ch3\u003eDoes a speaker cable really make an audible difference?\u003c\/h3\u003e\u003cp\u003eOn a system that's already resolving well, yes – typically a touch more control in the bass and clarity in the treble. On an entry-level system, the amplifier and speakers matter far more; a cable upgrade there won't be the thing you notice.\u003c\/p\u003e\u003ch3\u003eWhy choose the white sheath over a standard black cable?\u003c\/h3\u003e\u003cp\u003ePurely a styling choice – electrically it performs the same. The white sheath is meant to be seen rather than hidden, which suits a bright room or a light-coloured rack better than a black cable would.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio FTC White from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause getting cable length and termination right matters more than people expect. At our shop in Wädenswil we help you measure, choose the right length and connectors, and make sure the cable actually suits the rest of your system – drawing on years of experience with high end in the living room.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e a \u003ca href=\"\/en\/collections\/gato-audio\"\u003eGato Audio\u003c\/a\u003e amplifier or speaker pair from the range this cable was designed for.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"2 × 2 m","offer_id":53280814530896,"sku":null,"price":995.0,"currency_code":"CHF","in_stock":true},{"title":"2 × 3 m","offer_id":53280814563664,"sku":null,"price":1195.0,"currency_code":"CHF","in_stock":true},{"title":"2 × 4 m","offer_id":53280814596432,"sku":null,"price":1395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-ftc-white-lautsprecherkabel-paaransicht.jpg?v=1785900627"},{"product_id":"viablue-ls-2-silver-lautsprecherkabel","title":"ViaBlue LS-2 Silver Speaker Cable (Sold by the Metre, 100 m Reel)","description":"\u003cp\u003eThe ViaBlue LS-2 Silver is a speaker cable sold by the metre from a 100-metre reel – two flexible cores joined by a separating web, with silver-plated OFC copper strands, for custom cable lengths.\u003c\/p\u003e\n\u003cp\u003ePure, oxygen-free copper (OFC) delivers a precise midrange and bass. The silver plating on the strands, typical for ViaBlue, contributes to clean transmission into the high frequencies, and an additional polyethylene interlayer builds up less static charge than PVC, which benefits the treble.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou get pure cable material from a 100-metre reel, without connectors and without termination. The LS-2 Silver is available in three cross-sections – 1.5, 2.5 and 4.0 mm² – depending on cable length and speaker impedance. Made in Germany and intended for cutting to your individual length.\u003c\/p\u003e\n\u003ch3\u003eWho is the LS-2 Silver suitable for?\u003c\/h3\u003e\n\u003cp\u003eUseful if you need a length or termination that isn't available as a ready-made cable – for instance for an in-wall installation, very long cable runs, or a project where you terminate the cable yourself. For a normal stereo setup with standard lengths, one of our ready-terminated cables like the SC-2 or SC-4 is usually the simpler and more cost-effective choice, since cutting, stripping and connectors are already included there.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eHonest raw material for anyone who needs a special length or a fixed installation. For the normal case, we'd rather recommend a ready-terminated ViaBlue cable – for special requirements, the LS-2 Silver as bulk cable is exactly right, and our technician Maurizio will cut and terminate it for you on request.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker cable, sold by the metre from a reel\u003c\/li\u003e\n\u003cli\u003eCross-section: 1.5 mm², 2.5 mm² or 4.0 mm² (2-core)\u003c\/li\u003e\n\u003cli\u003eConductor material: oxygen-free copper (OFC), silver-plated strands\u003c\/li\u003e\n\u003cli\u003eInsulation: PVC outer jacket with additional polyethylene interlayer\u003c\/li\u003e\n\u003cli\u003ePackaging unit: 100-metre reel\u003c\/li\u003e\n\u003cli\u003eTermination: no connectors, cutting\/termination by HD Zürisee on request\u003c\/li\u003e\n\u003cli\u003eOrigin: handmade, manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the LS-2 Silver come with connectors?\u003c\/h3\u003e\n\u003cp\u003eNo, it's pure cable material from a 100-metre reel without connectors. For finished termination with banana plugs or cable lugs, talk to us directly – our technician handles cutting and termination.\u003c\/p\u003e\n\u003ch3\u003eWhich cross-section should I choose?\u003c\/h3\u003e\n\u003cp\u003eAs a rule of thumb: the longer the cable run and the lower the speaker impedance, the larger the cross-section should be. For short, standard runs, 1.5 mm² is usually enough; for long runs or 4-ohm speakers, 2.5 or 4.0 mm² is worthwhile. Tell us your cable length and speaker, and we'll recommend the right cross-section.\u003c\/p\u003e\n\u003ch3\u003eCan I also buy just a few metres?\u003c\/h3\u003e\n\u003cp\u003eThe reel is designed as a packaging unit of 100 metres. For smaller quantities or a ready-terminated standard length, one of our pre-terminated cables like the SC-2 or SC-4 is usually the more practical and cheaper solution.\u003c\/p\u003e\n\u003ch3\u003eWhat does the silver plating on the strands do?\u003c\/h3\u003e\n\u003cp\u003eIt improves transmission in the treble range in addition to the already very pure OFC copper. Sonically, this shows mainly in detail resolution and brilliance, while the copper itself provides the fundamental character in the midrange and bass.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the ViaBlue LS-2 Silver at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you honestly whether bulk cable makes sense for your project at all, or whether a ready-terminated cable would be the better choice. HD Zürisee in Wädenswil advises on cross-section, cable run and termination; our technician Maurizio will cut it on site on request.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find more ViaBlue cables and accessories for the right system combination in our \u003ca href=\"\/en\/collections\/viablue\"\u003eViaBlue collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"1,5 mm²","offer_id":53549188481360,"sku":null,"price":900.0,"currency_code":"CHF","in_stock":true},{"title":"2,5 mm²","offer_id":53549188514128,"sku":null,"price":1350.0,"currency_code":"CHF","in_stock":true},{"title":"4,0 mm²","offer_id":53549188546896,"sku":null,"price":2000.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-ls-2-silver-lautsprecherkabel-1-5mm2-frontansicht.jpg?v=1788606938"},{"product_id":"advance-paris-l-ls3-lautsprecherkabel-3-m","title":"Advance Paris L-LS3 Speaker Cable, 3 m","description":"\u003cp\u003eThe Advance Paris L-LS3 is a speaker cable with a 2.5 mm² cross-section in pure OCC copper, terminated with eight solid banana plugs (4 red, 4 black) for stereo connection – 3 metres in length per cable set.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-LS3?\u003c\/h2\u003e\n\u003cp\u003eBecause a speaker cable that's too thin or poorly made robs even the best amplifier of control over the cone. The generous cross-section and cleanly crimped banana plugs of the L-LS3 ensure a low-resistance, reliable contact between amplifier and speaker.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-LS3 for?\u003c\/h3\u003e\n\u003cp\u003eFor standard setups where 3 metres per channel is enough – the most common distance in Swiss living rooms. For larger rooms, or speakers placed further apart or further from the amplifier, the L-LS4 or L-LS5 is worth it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA generously sized, cleanly terminated speaker cable that doesn't turn the signal path into the system's bottleneck.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Speaker cable, stereo set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-section:\u003c\/strong\u003e 2.5 mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 × red banana plug, 4 × black banana plug, metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 3 m (per channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eAre banana plugs better than bare wire?\u003c\/h3\u003e\n\u003cp\u003eBanana plugs provide a reproducibly firm, low-resistance contact and are much easier to plug in and remove than bare wire strands – a clear advantage, especially with spring clips or tight connection terminals.\u003c\/p\u003e\n\u003ch3\u003eIs the cross-section enough for long runs?\u003c\/h3\u003e\n\u003cp\u003e2.5 mm² is comfortably sized for most living-room distances. For runs well over 5 metres, we're happy to advise you on an even more generous cross-section.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-LS3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the right cable length and cross-section depend on your room layout – we measure that at your place or during our conversation. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for wiring \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/endverstaerker\"\u003epower amplifier\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628456862032,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-ls3-lautsprecherkabel-3-m-produktansicht.jpg?v=1789722168"},{"product_id":"advance-paris-l-ls4-lautsprecherkabel-4-m","title":"Advance Paris L-LS4 Speaker Cable, 4 m","description":"\u003cp\u003eThe Advance Paris L-LS4 is a speaker cable with a 2.5 mm² cross-section in pure OCC copper, terminated with eight solid banana plugs (4 red, 4 black) for stereo connection – 4 metres in length per cable set.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-LS4?\u003c\/h2\u003e\n\u003cp\u003eBecause a speaker cable that's too thin or poorly made robs even the best amplifier of control over the cone. The generous cross-section and cleanly crimped banana plugs of the L-LS4 ensure a low-resistance, reliable contact – even over the slightly larger distance.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-LS4 for?\u003c\/h3\u003e\n\u003cp\u003eFor rooms where the amplifier and speakers aren't standing directly next to each other, or for floor-standing speakers placed further apart. If 3 metres is enough, the L-LS3 saves you a bit of cable clutter behind the rack.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA generously sized, cleanly terminated speaker cable for the slightly larger distance – with no compromise on cross-section.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Speaker cable, stereo set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-section:\u003c\/strong\u003e 2.5 mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 × red banana plug, 4 × black banana plug, metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 4 m (per channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a thicker cross-section at 4 m?\u003c\/h3\u003e\n\u003cp\u003eAt 2.5 mm², cable resistance stays in an uncritical range even over 4 metres for typical household speaker impedances. Only for very long runs or low-impedance speakers is it worth rethinking.\u003c\/p\u003e\n\u003ch3\u003eCan I have the cable shortened?\u003c\/h3\u003e\n\u003cp\u003eIn principle yes, but then you lose the terminated end plugs on the cut side. It's better to choose the right length from the start – L-LS3, L-LS4 or L-LS5.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-LS4 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we help you determine the length you actually need, instead of blanket-recommending the most expensive cable. Call, write, or reach us on WhatsApp – we advise honestly.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for wiring \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/endverstaerker\"\u003epower amplifier\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628456960336,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-ls4-lautsprecherkabel-4-m-produktansicht.jpg?v=1789722176"},{"product_id":"advance-paris-l-ls5-lautsprecherkabel-5-m","title":"Advance Paris L-LS5 Speaker Cable, 5 m","description":"\u003cp\u003eThe Advance Paris L-LS5 is a speaker cable with a 2.5 mm² cross-section in pure OCC copper, terminated with eight solid banana plugs (4 red, 4 black) for stereo connection – 5 metres in length per cable set, for the greatest distance in the L-LS series.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the L-LS5?\u003c\/h2\u003e\n\u003cp\u003eBecause large rooms and widely spaced speakers need longer cable runs without losing level or control along the way. The generous cross-section of the L-LS5 keeps cable resistance in an uncritical range even over 5 metres.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the L-LS5 for?\u003c\/h3\u003e\n\u003cp\u003eFor large living or listening rooms where the amplifier and speakers are clearly far apart. For most standard living rooms, the shorter L-LS3 or L-LS4 is already enough – better to measure your actual distance before reaching for the longest cable.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe right cable for large rooms, where length doesn't come at the expense of cross-section.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Speaker cable, stereo set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-section:\u003c\/strong\u003e 2.5 mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e pure OCC copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 × red banana plug, 4 × black banana plug, metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5 m (per channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I really need 5 metres?\u003c\/h3\u003e\n\u003cp\u003eFirst measure the actual distance between amplifier and speaker – often the shorter L-LS3 or L-LS4 is entirely sufficient. The L-LS5 pays off mainly in large rooms or awkward furniture layouts.\u003c\/p\u003e\n\u003ch3\u003eDoes the cable lose sound quality at 5 m?\u003c\/h3\u003e\n\u003cp\u003eWith a 2.5 mm² cross-section, resistance stays uncritical over 5 metres for typical household speaker impedances. The signal loss is practically unnoticeable.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the L-LS5 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you honestly whether you need the long or the short version – not just try to sell the most expensive cable. Our team of specialists in Wädenswil will measure directly at your place if needed.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIdeal for wiring \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e to an \u003ca href=\"\/en\/collections\/vollverstaerker\"\u003eintegrated amplifier\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/endverstaerker\"\u003epower amplifier\u003c\/a\u003e.\u003c\/p\u003e","brand":"Advance Paris","offers":[{"title":"Default Title","offer_id":53628457025872,"sku":null,"price":449.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/advance-paris-l-ls5-lautsprecherkabel-5-m-produktansicht.jpg?v=1789722180"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/lautsprecherkabel.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}