{"title":"GATO AUDIO","description":"\u003cp\u003eGato Audio from Denmark combines Scandinavian design with serious electronics – the curved high-gloss cases are unmistakable. The range has grown noticeably: from integrated and streaming amplifiers through a complete pre-\/power amp combination to its own FM speaker series. Ready for demo on Lake Zürich.\u003c\/p\u003e\n\u003ch2\u003eThe Gato Audio range at our store\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifiers\u003c\/strong\u003e – the AMP-150 AE as a classic integrated amplifier, plus the DIA series (250S\/400S NPM) with streaming, DAC and preamp on board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre- \u0026 power amps\u003c\/strong\u003e – PRE-1 (preamplifier) and PRD-3S NPM (streaming preamplifier) for separates setups, plus PWR-222 (mono power amp) as well as DPA-2506\/DPA-4004 as multichannel power amps for home cinema.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSources\u003c\/strong\u003e – PPA-1 phono preamplifier, SDA-1 and SDA-1 NPM as a DAC with headphone amp (NPM additionally with network player), CDD-1 AE as a CD player with DAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeakers\u003c\/strong\u003e – the revised FM series (FM-8, FM-9, FM-15, FM-30, FM-50) from bookshelf to floorstanding speaker, in four finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCables\u003c\/strong\u003e – the FTC speaker cable, made to your desired length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHonestly speaking\u003c\/h2\u003e\n\u003cp\u003eGato is for people who value design and still don't want to compromise on sound. Design and build quality rank high with Gato, and you notice that in every detail – from the electronics to the FM speaker series. Sonically more rounded and mature than sharp and analytical.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions about Gato Audio\u003c\/h2\u003e\n\u003ch3\u003eDoes Gato Audio also build speakers?\u003c\/h3\u003e\n\u003cp\u003eYes – the FM series (FM-8 to FM-50) is Gato's own speaker line, revised since 2021, from the compact bookshelf speaker to the large floorstander.\u003c\/p\u003e\n\u003ch3\u003eWhat can a DIA streaming amplifier do?\u003c\/h3\u003e\n\u003cp\u003eAmplification, streaming, DAC and preamp in one chassis – connect speakers, done. Ideal if you want a slim, stylish system.\u003c\/p\u003e\n\u003ch3\u003eIs Gato suitable for home cinema?\u003c\/h3\u003e\n\u003cp\u003eYes – the DPA multichannel power amps are built exactly for that. We plan the right configuration with you.\u003c\/p\u003e\n\u003ch3\u003eCan I listen to Gato at your store?\u003c\/h3\u003e\n\u003cp\u003eWhatever's set up in Wädenswil, you can listen to; on request also at your home.\u003c\/p\u003e","products":[{"product_id":"gatoaudioamp150bl","title":"Gato Audio AMP-150 AE Integrated Amplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio AMP-150 AE is an integrated stereo amplifier from Denmark that delivers 2× 150 watts at 8 ohms while deliberately adding no colouration of its own.\u003c\/p\u003e\u003cp\u003eThe black high-gloss front is intentionally unadorned: a small display, a large volume knob, done. All the effort goes into the inside – and into the power supply, which holds the reserves ready for when a track suddenly turns loud.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio AMP-150 AE?\u003c\/h2\u003e\u003cp\u003eBecause it combines power and restraint at the same time. 2× 150 W at 8 Ω and 2× 250 W at 4 Ω are enough to keep even low-efficiency speakers firmly on a short leash, and the 4 to 16 ohm design accepts virtually any speaker. With more than 100 dB signal-to-noise ratio and under 0.05% distortion at rated power, it stays clean throughout – values you don't hear, but whose absence you notice. The solid aluminium housing is designed and built in Denmark and turns understatement into a design principle.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eAn open, unhurried sound with firm control in the bass and plenty of calm between the notes. At room volume the AMP-150 AE stays just as composed as at levels where the neighbours start asking questions. A balanced XLR input and four RCA pairs take in whatever sources you have; the preamp outputs on XLR and RCA let you add a further power amp or an active subwoofer later on.\u003c\/p\u003e\u003ch3\u003eWho is the AMP-150 AE suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: it's for anyone who wants a neutral, powerful analog integrated amplifier as the heart of their system and prefers to choose their own sources. If you'd rather have streaming and a D\/A converter built in, the Gato DIA-250S NPM or DIA-400S NPM is the better choice – the AMP-150 AE has neither a network module nor a DAC. Headphone fans are also out of luck: there's no headphone jack. And if you expect a front panel full of lights, you'll be disappointed. That's by design.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish high-end integrated amplifier that combines power with genuine neutrality instead of putting on a show. Whether it suits your speakers and your room is something we're happy to work out with you: call HD Zürisee in Wädenswil or drop us a line – we'll talk through the combination, placement and cabling, and our technician can handle delivery and installation on site if you like.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e integrated stereo amplifier (analog)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 150 W RMS at 8 Ω \/ 2× 250 W RMS at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB); 2 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.05% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 27 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp output impedance:\u003c\/strong\u003e 100 Ω (RCA) \/ 200 Ω (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 4× RCA stereo – all gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp outputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 1× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle \u0026lt; 40 W, max. 600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-4 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat finishes is the AMP-150 AE available in?\u003c\/h3\u003e\u003cp\u003eIn black high gloss, white high gloss and walnut high gloss. There's also the custom colour option: Gato will paint the housing in almost any high-gloss shade on request. Technically all finishes are identical – it's purely about how it looks in your room. That way the amplifier suits light furniture as well as dark.\u003c\/p\u003e\u003ch3\u003eDoes the AMP-150 AE have a built-in DAC or streaming?\u003c\/h3\u003e\u003cp\u003eNo, the AMP-150 AE is a purely analog integrated amplifier with no D\/A converter and no network module. Digital sources therefore need a separate DAC or streamer in front of it. If you'd rather have both built in, the Gato DIA-250S NPM and DIA-400S NPM are the matching models from the same maker.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the AMP-150 AE?\u003c\/h3\u003e\u003cp\u003eNo, the AMP-150 AE has no headphone output. It's consistently designed for driving speakers. For headphones, you connect a separate headphone amplifier to the preamp output, via XLR or RCA. We're happy to help you find the combination that suits your headphones.\u003c\/p\u003e\u003ch3\u003eWhich speakers suit the AMP-150 AE?\u003c\/h3\u003e\u003cp\u003eAlmost all of them: the amplifier is rated for 4 to 16 ohms and delivers 2× 250 watts at 4 ohms. That lets it drive compact bookshelf speakers just as well as large multi-driver floorstanders. More important than the wattage is that the speakers and the room match each other – and that's exactly where our advice comes in.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio AMP-150 AE at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause an amplifier only really shines in the right system. We at HD Zürisee in Wädenswil have been working with hi-fi since the nineties and know which speaker-amplifier combinations prove themselves in everyday use. Add to that Mauri, our own technician, who handles delivery, placement and installation. Call us or send a message.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMatching \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e or compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e as an analog source, a \u003ca href=\"\/en\/collections\/dac\"\u003eDAC\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/streamer\"\u003estreamer\u003c\/a\u003e for the digital side – and decent \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e in between.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506748752,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-amp-150-ae-vollverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785896882"},{"product_id":"gatoaudioamp150cu","title":"Gato Audio AMP-150 AE Integrated Amplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio AMP-150 AE is an analog stereo integrated amplifier from Denmark delivering 2× 150 watts at 8 ohms, available in this version in a freely chosen high-gloss custom colour.\u003c\/p\u003e\u003cp\u003eA note on the photos: the orange-finished unit shown is Gato's sample piece illustrating the custom-colour option, not the colour you'll receive. You choose your own shade freely – the housing is finished in high gloss in virtually any colour on request, from discreet grey to something that matches your wall colour. Nothing changes technically.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio AMP-150 AE?\u003c\/h2\u003e\u003cp\u003eBecause you rarely get to choose an amplifier of this calibre by colour – and here you can. Under the paint works exactly the same technology as in the standard finishes: 2× 150 W at 8 Ω, 2× 250 W at 4 Ω, distortion under 0.05% at rated power and more than 100 dB signal-to-noise ratio. The 4 to 16 ohm design keeps it composed with any speaker, and the solid aluminium housing, made in Denmark, gives the paintwork a clean foundation.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eAn amplifier that's visually tailored to your room and adds nothing of its own to the sound: open, calm, with firm control in the bass. Connection is via a balanced XLR input and four RCA pairs; preamp outputs on XLR and RCA keep the door open for a further power amp or an active subwoofer. Two pairs of gold-plated binding posts are provided for the speakers.\u003c\/p\u003e\u003ch3\u003eWho is the AMP-150 AE suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: this version is worth it when black, white and walnut simply don't work where the amp will stand. If you're in a hurry, a standard colour is the better bet – a custom finish is made to order. And as with every AMP-150 AE: no DAC, no network, no headphone jack. If you want streaming built in, the DIA-250S NPM and DIA-400S NPM are the right address.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eHigh-end technology without a colour dictate. The AMP-150 AE performs just as assuredly in every finish, and here it gets to match the room instead of merely standing in it. Tell us which shade you have in mind: HD Zürisee in Wädenswil checks feasibility with Gato, discusses the right speaker combination with you, and handles delivery and installation on request.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e integrated stereo amplifier (analog)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 150 W RMS at 8 Ω \/ 2× 250 W RMS at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB); 2 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.05% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 27 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp output impedance:\u003c\/strong\u003e 100 Ω (RCA) \/ 200 Ω (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 4× RCA stereo – all gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp outputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 1× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle \u0026lt; 40 W, max. 600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom colour, individual high-gloss finish on request\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-4 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the product photo show the colour I'll get?\u003c\/h3\u003e\u003cp\u003eNo, the orange finish in the photos is Gato's sample piece for the custom-colour option. You choose your own shade freely; the housing is finished in high gloss in virtually any colour on request. Tell us the shade you want or a colour code, and we'll check feasibility with the manufacturer.\u003c\/p\u003e\u003ch3\u003eDoes the custom-colour version sound different from black, white or walnut?\u003c\/h3\u003e\u003cp\u003eNo, all four finishes are technically identical. The amplifier circuit, power supply, connections and the 2× 150 W at 8 ohms output stay the same – only the surface of the housing differs. The colour is purely a matter of interior design. The remote control and included accessories are the same too.\u003c\/p\u003e\u003ch3\u003eDoes the AMP-150 AE have streaming, a DAC or a headphone output?\u003c\/h3\u003e\u003cp\u003eNo, none of those. The AMP-150 AE is a purely analog integrated amplifier with no network module, no D\/A converter and no headphone jack. Digital sources are added via a separate streamer or DAC, headphones via a dedicated headphone amplifier on the preamp output. Everything in one unit is offered by the DIA-250S NPM and the DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eHow big and how heavy is the amplifier?\u003c\/h3\u003e\u003cp\u003eIt measures 32.5 × 10.5 × 43 centimetres (width × height × depth) and weighs 13.8 kilograms. Allow a few extra centimetres at the back for cables and plugs. An open rack shelf is ideal, since the unit gives off noticeable heat even at idle.\u003c\/p\u003e\u003ch3\u003eWhy buy the AMP-150 AE in a custom colour at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a custom finish needs coordination: shade, feasibility, timing. We at HD Zürisee in Wädenswil handle this with the manufacturer, advise you on the right speaker combination, and stay reachable after the purchase. Our technician Mauri delivers and installs at your place on request. Call, write, or use WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eColour-matched \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, digital sources from our \u003ca href=\"\/en\/collections\/alle-quellen\"\u003esource selection\u003c\/a\u003e – such as a \u003ca href=\"\/en\/collections\/cd-player\"\u003eCD player\u003c\/a\u003e – and the matching \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e. More models can be found among our \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506781520,"sku":null,"price":5395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-amp-150-ae-vollverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785896882"},{"product_id":"gatoaudioamp150wh","title":"Gato Audio AMP-150 AE Integrated Amplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio AMP-150 AE is an analog stereo integrated amplifier made in Denmark that delivers 2× 150 watts at 8 ohms and passes on the signal as unaltered as possible.\u003c\/p\u003e\u003cp\u003eWhite high gloss turns the solid aluminium housing into a bright piece of furniture rather than a dark block on the shelf. There are exactly as many controls as you need – Gato prefers to put the effort where it's noticed afterwards.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio AMP-150 AE?\u003c\/h2\u003e\u003cp\u003eBecause it has reserves built in that you rarely use to the full yet never want to be without. 2× 150 W are available at 8 Ω, 2× 250 W at 4 Ω, and the 4 to 16 ohm design means even awkward impedance curves don't make it break a sweat. Distortion under 0.05% at rated power and more than 100 dB signal-to-noise ratio simply mean, in everyday terms: what comes out the back is what the source sent in. The amplifier is designed and built in Denmark.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eFour RCA input pairs and a balanced XLR input for your sources, plus preamp outputs on XLR and RCA in case a further power amp or an active subwoofer joins later. Two pairs of gold-plated binding posts allow bi-wiring without fiddling with adapters. Sound-wise: open, calm, with a bass that grips rather than pushes – and a background where simply nothing is going on.\u003c\/p\u003e\u003ch3\u003eWho is the AMP-150 AE suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: ideal for anyone looking for a pure, powerful analog hub and who deliberately chooses their sources separately. Less suitable if you want streaming, network and D\/A conversion in the same housing – for that, Gato offers the DIA-250S NPM and the DIA-400S NPM. If you're often on headphones, you'll need an extra device, since the AMP-150 AE has no headphone jack. And if you like menus and effects: there's nothing to click here.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eUnderstatement with muscle. The AMP-150 AE plays neutral, controlled and without a show – and looks as though someone drew it with a very steady hand. Tell us about your room and your speakers: HD Zürisee in Wädenswil can be reached by phone, WhatsApp or email, and Mauri takes care of delivery and installation on request.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e integrated stereo amplifier (analog)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 150 W RMS at 8 Ω \/ 2× 250 W RMS at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB); 2 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.05% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 27 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp output impedance:\u003c\/strong\u003e 100 Ω (RCA) \/ 200 Ω (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 4× RCA stereo – all gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp outputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 1× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle \u0026lt; 40 W, max. 600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-4 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the white AMP-150 AE technically different from the black version?\u003c\/h3\u003e\u003cp\u003eNo, all finishes are technically identical. The difference is purely visual: there's black high gloss, white high gloss and walnut high gloss, plus a custom colour in high gloss on request. So you choose by furniture and room, not by sound. If you're unsure which finish will look better in your living room, send us a photo.\u003c\/p\u003e\u003ch3\u003eDo I need a separate streamer or DAC for the AMP-150 AE?\u003c\/h3\u003e\u003cp\u003eYes, as soon as you want to use digital sources. The AMP-150 AE works purely in the analog domain, with no built-in D\/A converter and no network module. A streamer, a DAC or a CD player with its own converter belongs in front of it. If you'd rather have everything in one housing, take a look at the Gato DIA-250S NPM or DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eDoes the AMP-150 AE have a headphone connection?\u003c\/h3\u003e\u003cp\u003eNo, there's no headphone jack fitted. The amplifier is fully focused on driving speakers. If you regularly enjoy music on headphones, you connect a dedicated headphone amplifier to the preamp output – XLR or RCA are available for that. We'll tell you which model suits your headphones.\u003c\/p\u003e\u003ch3\u003eHow much space does the AMP-150 AE need?\u003c\/h3\u003e\u003cp\u003eIt measures 32.5 cm in width, 10.5 cm in height and 43 cm in depth, and weighs 13.8 kilograms. Plan for some extra space at the back for cables and plugs, and give it room to breathe so the heat can escape – it draws under 40 watts at idle.\u003c\/p\u003e\u003ch3\u003eWhy buy the AMP-150 AE at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we don't sell amplifiers in isolation, but as part of a chain. Our experienced team in Wädenswil looks at which speakers, sources and cables suit your room, and stays reachable afterwards. Service and installation are handled by Mauri, our own technician. Get in touch by phone, WhatsApp or email.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eBright \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e or full-sized \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e, a \u003ca href=\"\/en\/collections\/streamer\"\u003estreamer\u003c\/a\u003e or a \u003ca href=\"\/en\/collections\/dac\"\u003eDAC\u003c\/a\u003e for digital sources, a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e for the vinyl shelf – and matching \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to keep the chain clean.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506814288,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-amp-150-ae-vollverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785896906"},{"product_id":"gatoaudioamp150wn","title":"Gato Audio AMP-150 AE Integrated Amplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio AMP-150 AE is a purely analog integrated amplifier from Denmark with 2× 150 watts at 8 ohms, designed to leave the character of the source untouched.\u003c\/p\u003e\u003cp\u003eIn walnut high gloss, the solid aluminium body gets a warm wooden surface that looks more like furniture than equipment in the living room. Inside, everything stays the same: a generously sized power supply and an amplifier stage that adds as little of its own character as possible.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio AMP-150 AE?\u003c\/h2\u003e\u003cp\u003eBecause it delivers control instead of effect. At 4 Ω it puts out 2× 250 W, distortion stays under 0.05% at rated power, and the signal-to-noise ratio is above 100 dB – this amplifier doesn't dwell on itself. Frequency response spans from 2 Hz to 100 kHz (±3 dB), far beyond anything an ear ever needs; that's precisely why nothing gets out of hand within the audible range. Honestly: units like this get kept for ten years or more.\u003c\/p\u003e\u003ch2\u003eWhat you experience\u003c\/h2\u003e\u003cp\u003eMusic that sorts itself out. Voices sit calmly in the centre, bass arrives dry and on time, and even densely packed passages stay clear and organised. On the connection side there's a balanced XLR input, four RCA pairs, preamp outputs on XLR and RCA, and two pairs of speaker terminals with gold-plated banana-compatible binding posts. The whole thing is operated via the large rotary knob or with the included RC-4 remote control.\u003c\/p\u003e\u003ch3\u003eWho is the AMP-150 AE suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the AMP-150 AE is for people who put together sources and speakers deliberately and want a neutral amplifier at the centre of it. If you're after an all-in-one solution with network and DAC, the DIA-250S NPM or DIA-400S NPM is the right home for you. Headphones can't be plugged in directly – that needs a separate headphone amplifier. And if you plan to hide the unit in a closed cabinet, keep the heat dissipation in mind.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eAn amplifier that stops standing out after two weeks – and that's the biggest compliment there is. Walnut high gloss makes it extra living-room-friendly for anyone who finds black electronics look too technical. Write to us or call HD Zürisee in Wädenswil if you'd like to know which speakers suit it especially well.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e integrated stereo amplifier (analog)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 150 W RMS at 8 Ω \/ 2× 250 W RMS at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB); 2 Hz – 100 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.05% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 100 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 27 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp output impedance:\u003c\/strong\u003e 100 Ω (RCA) \/ 200 Ω (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 4× RCA stereo – all gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreamp outputs:\u003c\/strong\u003e 1× balanced XLR (Neutrik), 1× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle \u0026lt; 40 W, max. 600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut high gloss (genuine veneer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-4 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the walnut on this amplifier real wood?\u003c\/h3\u003e\u003cp\u003eYes, it's genuine walnut veneer, finished in high gloss. Gato uses veneer rather than foil, so the grain differs slightly from unit to unit. The surface plays no role sonically: all four finishes are technically identical, and the choice comes down purely to look and decor.\u003c\/p\u003e\u003ch3\u003eDoes the AMP-150 AE have networking or a built-in converter?\u003c\/h3\u003e\u003cp\u003eNo. The AMP-150 AE amplifies only analog signals; there's no D\/A converter and no network module on board. Digital sources such as a streamer or a CD player with its own converter go in front of it. If you'd rather have both built into the amplifier, the Gato DIA-250S NPM and DIA-400S NPM are the alternative.\u003c\/p\u003e\u003ch3\u003eWhat's included with the AMP-150 AE?\u003c\/h3\u003e\u003cp\u003eAlongside the amplifier, the box contains a power cable, the Gato Audio RC-4 remote control, a CR2032 battery and the manual. Speaker cables and RCA or XLR connections aren't included – we'd rather match those specifically to your system than bundle in generic ones. Just ask us what suits your combination.\u003c\/p\u003e\u003ch3\u003eCan I connect two pairs of speakers?\u003c\/h3\u003e\u003cp\u003eYes, the AMP-150 AE has two pairs of gold-plated binding posts. That lets you connect one speaker pair in bi-wiring or run a second pair. Keep the permitted impedance of 4 to 16 ohms in mind – we're happy to tell you in advance how that works out in your case.\u003c\/p\u003e\u003ch3\u003eWhy order the Gato AMP-150 AE from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we've been selling hi-fi since 1997 and know which equipment brings joy in everyday use. We're an authorised dealer, we work out the combination of speakers, sources and cables with you, and we handle the warranty correctly. Mauri, our technician, delivers and installs at your home on request.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eWarm-toned \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e or compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e on solid \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e with a matching \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e – and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to go with it.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506847056,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-amp-150-ae-vollverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785896907"},{"product_id":"gatoaudiodia250snpmbl","title":"Gato Audio DIA-250S NPM Streaming Amplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-250S NPM is a streaming integrated amplifier that combines a network player, D\/A converter and a 2× 250-watt power amp in a single housing.\u003c\/p\u003e\u003cp\u003eNPM stands for \u003cstrong\u003eNetwork Player Module\u003c\/strong\u003e – the streaming module that Gato Audio builds into the DIA-250S at the factory in Copenhagen. It turns the amplifier into a full-fledged network player with Roon Ready certification, without a second unit taking up space on the shelf. Connect the speakers, plug in the network cable, and the system is ready. This version has a high-gloss black lid.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-250S NPM?\u003c\/h2\u003e\u003cp\u003eBecause it replaces an entire chain without cutting corners. The Class-D power stage delivers 2× 250 W at 8 Ω and doubles to 2× 500 W at 4 Ω – reserves that keep even demanding floorstanders well fed. On the digital side, a Burr-Brown PCM1794 upsamples every digital source to 24-bit\/192 kHz. The Network Player Module brings Tidal, Qobuz, Deezer, DLNA\/UPnP and Roon along with it; it's controlled via the mconnect Control app, through Roon or with the supplied remote. And yes, the unit looks as though a furniture designer drew it. In a sense that's even true – Gato designs and builds in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl. The bass stays dry and taut, voices sit calmly in the centre, and there's a pleasant hush between the notes – a signal-to-noise ratio above 110 dB isn't just a number on a spec sheet. Whether the signal comes from the network, via USB from a computer, or as analog over XLR, the character stays the same: powerful, but never pushy. Streaming here is an option, not a requirement – internet radio and your own NAS music collection run entirely without a subscription.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-250S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the DIA-250S NPM is for you if you want a serious system without a tower of components. Amplifier, converter and streamer in one housing, one power cable, done. It's not for you if you already own a high-quality external DAC or streamer – then you'd be paying for technology twice, and you're better off with a purely analog integrated amplifier. If you want to connect a turntable directly, you'll need a separate phono preamp too: the DIA-250S has no phono stage. And if your listening room is more gymnasium than living room, take a look at the larger DIA-400S NPM instead.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA complete system hub in Danish understatement – powerful, versatile and refreshingly uncomplicated in everyday use. At HD Zürisee in Wädenswil we set up network, streaming services and speakers together with you, so the amplifier does exactly what you bought it for from day one.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is a remarkably well-sorted and extremely flexible amplifier, with a sound treading a confident path between power and poise, drama and delicacy.\"\u003c\/em\u003e – Hi-Fi News, 2019 (Sound Quality 88%)\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with DAC and network player (NPM = Network Player Module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 250 W at 8 Ω \/ 2× 500 W at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower stage:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player (NPM):\u003c\/strong\u003e Roon Ready, DLNA\/UPnP, Tidal, Qobuz and Deezer built in; controlled via the mconnect Control app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (RJ45) or Wi-Fi 802.11 b\/g\/n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio formats:\u003c\/strong\u003e FLAC, WAV, AIFF, Apple Lossless, AAC, MP3, WMA, OGG, Monkey's Audio, MQA (via Roon) – up to 24-bit\/192 kHz, including gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB Type B (asynchronous, up to 24-bit\/192 kHz), 1× coaxial RCA, 1× optical Toslink (up to 24-bit\/96 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e 4.2 with aptX HD (up to 24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× unbalanced RCA (20 kΩ), 1× balanced XLR (40 kΩ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs 1× XLR and 1× RCA (75 Ω), volume-controlled; input 1 switchable to fixed level via Direct\/HT mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none – connect a headphone amplifier to the line outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby \/ 23 W idle \/ max. 1000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic aluminium housing, high-gloss lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, RC-5 remote control with CR2032 battery, Bluetooth antenna, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does NPM stand for on the Gato Audio DIA-250S?\u003c\/h3\u003e\u003cp\u003eNPM stands for Network Player Module. That's the streaming module Gato Audio builds into the DIA-250S. It brings Ethernet and Wi-Fi, Roon Ready, DLNA\/UPnP as well as Tidal, Qobuz and Deezer to the unit. Without NPM, the DIA-250S remains an integrated amplifier with a DAC, but without a network connection.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DIA-250S NPM and the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eMainly the power. The DIA-250S delivers 2× 250 W at 8 Ω, the DIA-400S 2× 400 W. The network module, converter and connections are identical. For normal to large living rooms the 250S has plenty of reserve; the 400S is meant for very large rooms or especially power-hungry speakers.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eNot directly: the DIA-250S NPM has no headphone output. You connect a headphone amplifier to the line outputs, either balanced via XLR or unbalanced via RCA. Both follow the volume control. The speaker outputs can be muted with a long press on the standby button, so only the headphones play.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the DIA-250S NPM available in?\u003c\/h3\u003e\u003cp\u003eGato Audio offers the DIA-250S NPM with a high-gloss lid in black, in white, or in genuine walnut veneer. There's also a custom colour option, an individual high-gloss finish to your specification. This page shows the black version. All four variants are technically identical – the colour changes nothing about power, converter or connections.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-250S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming amplifier only becomes a joy once the network, app and speakers work together. We're an authorised dealer, know the quirks of Roon and Wi-Fi from daily practice, and have Mauri, our own technician, for installation and service. Call us, write to us or ask via WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find matching partners for 2× 250 watts among the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. If you listen to vinyl, add a \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e, and decent \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e get out of the chain what's actually in it.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506879824,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-250s-npm-streaming-verstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785897883"},{"product_id":"gatoaudiodia250snpmcu","title":"Gato Audio DIA-250S NPM Streaming Amplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-250S NPM is a streaming integrated amplifier that bundles a network player, D\/A converter and a Class-D power stage with 2× 250 watts in a single housing.\u003c\/p\u003e\u003cp\u003eNPM stands for \u003cstrong\u003eNetwork Player Module\u003c\/strong\u003e – the network module Gato Audio uses to turn the amplifier into a Roon Ready streamer at the factory. In this version, the lid comes in an individual custom colour: you specify the shade, Gato finishes it in high gloss. \u003cstrong\u003eImportant note on the photos: they show an orange-finished sample unit from the manufacturer illustrating the custom-colour option. You choose the colour freely – orange is only the illustration.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-250S NPM?\u003c\/h2\u003e\u003cp\u003eBecause here you decide not just the technology but also the look, without the technology becoming an afterthought. The Class-D power stage delivers 2× 250 W at 8 Ω and 2× 500 W at 4 Ω, the Burr-Brown PCM1794 converts with upsampling to 24-bit\/192 kHz, and the Network Player Module brings Roon Ready, DLNA\/UPnP as well as Tidal, Qobuz and Deezer into the unit via Ethernet or Wi-Fi. It's controlled via the mconnect Control app, through Roon or with the remote control. Alongside that, USB, coax, Toslink, Bluetooth with aptX HD and two analog inputs remain for anything not on the network.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA one-off piece that matches your room – and an amplifier that doesn't hide behind its looks when it comes to sound. Bass with contour, calm midrange, a signal-to-noise ratio above 110 dB. Because every custom colour is finished individually, plan for some lead time here; in return, no one else has the same unit in their living room. Streaming subscriptions are an option here, not a requirement: internet radio, NAS files and the analog sources run just as well without one.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-250S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the custom colour is for you if black, white and walnut don't suit your decor, or you simply want something of your own. If you're in a hurry, a standard colour is the better bet – custom finishes take their time. If you already run an external high-end DAC or streamer, you'd be paying for functions twice here, and you're better served with a purely analog integrated amplifier. A turntable additionally needs a phono preamp, and for very large rooms the DIA-400S NPM is there.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe same technology as the standard colours, just in your shade: a complete streaming integrated amplifier that condenses the whole chain into one unit. At HD Zürisee in Wädenswil we discuss your colour wish with you, check feasibility with the manufacturer, and then set up network, services and speakers.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is a remarkably well-sorted and extremely flexible amplifier, with a sound treading a confident path between power and poise, drama and delicacy.\"\u003c\/em\u003e – Hi-Fi News, 2019 (Sound Quality 88%)\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with DAC and network player (NPM = Network Player Module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 250 W at 8 Ω \/ 2× 500 W at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower stage:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player (NPM):\u003c\/strong\u003e Roon Ready, DLNA\/UPnP, Tidal, Qobuz and Deezer built in; controlled via the mconnect Control app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (RJ45) or Wi-Fi 802.11 b\/g\/n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio formats:\u003c\/strong\u003e FLAC, WAV, AIFF, Apple Lossless, AAC, MP3, WMA, OGG, Monkey's Audio, MQA (via Roon) – up to 24-bit\/192 kHz, including gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB Type B (asynchronous, up to 24-bit\/192 kHz), 1× coaxial RCA, 1× optical Toslink (up to 24-bit\/96 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e 4.2 with aptX HD (up to 24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× unbalanced RCA (20 kΩ), 1× balanced XLR (40 kΩ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs 1× XLR and 1× RCA (75 Ω), volume-controlled; input 1 switchable to fixed level via Direct\/HT mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none – connect a headphone amplifier to the line outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby \/ 23 W idle \/ max. 1000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic aluminium housing, high-gloss lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom colour, individual high-gloss finish to customer specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, RC-5 remote control with CR2032 battery, Bluetooth antenna, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does NPM stand for on the Gato Audio DIA-250S?\u003c\/h3\u003e\u003cp\u003eNPM is short for Network Player Module. This refers to the network module Gato Audio builds into the DIA-250S at the factory: Ethernet and Wi-Fi, Roon Ready, DLNA\/UPnP as well as Tidal, Qobuz and Deezer. Without NPM, the DIA-250S would remain an integrated amplifier with a D\/A converter, but without a network connection.\u003c\/p\u003e\u003ch3\u003eWhat colour do I get with the DIA-250S NPM in custom colour?\u003c\/h3\u003e\u003cp\u003eWhichever one you choose. The images show an orange-finished sample unit from Gato Audio that illustrates the custom-colour option – it's not a fixed delivery shade. You settle on your desired shade before ordering, and Gato then finishes the lid in high gloss. We check feasibility with the manufacturer beforehand.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DIA-250S NPM and the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eMainly the power: 2× 250 W at 8 Ω for the DIA-250S NPM, 2× 400 W for the DIA-400S NPM. The network module, converter and connection panel are identical, and both are available in a custom colour. The 250S is plenty for normal to large living rooms; the 400S is meant for very large rooms.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eNot directly, the DIA-250S NPM has no headphone output. The route goes via the line outputs in XLR or RCA, which follow the volume control: that's where you connect a headphone amplifier. You mute the speakers with a long press on the standby button.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-250S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a custom finish needs coordination and isn't something for a quick add-to-cart click. We discuss the shade, lead time and the right system all around, handle the warranty as an authorised dealer, and set up the unit at your place on request. Call, send an email or a WhatsApp message.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find colour-matched partners among the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. If you'd like to compare, browse our full range of \u003ca href=\"\/en\/collections\/alle-verstarker\"\u003eamplifiers\u003c\/a\u003e – and matching \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e round off the chain.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506945360,"sku":null,"price":3895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-250s-npm-streaming-verstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785897921"},{"product_id":"gatoaudiodia250snpmwh","title":"Gato Audio DIA-250S NPM Streaming Amplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-250S NPM is a streaming integrated amplifier from Denmark that combines a network player, D\/A converter and a 2× 250-watt power amp in a single housing.\u003c\/p\u003e\u003cp\u003eThe abbreviation NPM stands for \u003cstrong\u003eNetwork Player Module\u003c\/strong\u003e. This is the network module that Gato Audio integrates into the amplifier at the factory, turning it into a Roon Ready streamer – no extra unit, no second power supply, no additional tangle of cables behind the rack. This version's high-gloss lid comes in white.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-250S NPM?\u003c\/h2\u003e\u003cp\u003eBecause three devices are packed into one, and none of them is a token gesture. The Class-D power stage delivers 2× 250 W at 8 Ω and 2× 500 W at 4 Ω, the Burr-Brown PCM1794 upsamples every digital source to 24-bit\/192 kHz, and the Network Player Module brings Tidal, Qobuz, Deezer as well as files from your home NAS into the living room – via Ethernet or Wi-Fi. It's operated via the mconnect Control app, through Roon or with the remote control. If you'd rather work without a network, you use USB, coax, Toslink, Bluetooth or the two analog inputs.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eAn amplifier that can go loud without sounding loud. The bass stays well-defined, the midrange is open, and calm reigns in the background – you notice the signal-to-noise ratio above 110 dB mainly by noticing nothing at all. Add to that a housing of non-magnetic aluminium that still looks like new after years. And if you're wondering whether a subscription is mandatory for that: no. Internet radio and your own music collection on the network are entirely sufficient.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-250S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: ideal for anyone who wants a high-quality system but has no interest in four devices, three power supplies and a dozen cables. It's less sensible if you already have an external high-end DAC or streamer in use – then you'd be paying for functions twice, and a purely analog integrated amplifier is the more honest choice. Turntable owners additionally need a phono preamp, since there's no built-in phono stage. For very large rooms or particularly low-efficiency speakers, there's the more powerful DIA-400S NPM.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eDanish understatement with a decent amount of muscle underneath: the DIA-250S NPM clears out the rack and still delivers full-format sound. We at HD Zürisee in Wädenswil help you with the network, app setup and speaker selection, so the purchase doesn't turn into a DIY project.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is a remarkably well-sorted and extremely flexible amplifier, with a sound treading a confident path between power and poise, drama and delicacy.\"\u003c\/em\u003e – Hi-Fi News, 2019 (Sound Quality 88%)\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with DAC and network player (NPM = Network Player Module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 250 W at 8 Ω \/ 2× 500 W at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower stage:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player (NPM):\u003c\/strong\u003e Roon Ready, DLNA\/UPnP, Tidal, Qobuz and Deezer built in; controlled via the mconnect Control app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (RJ45) or Wi-Fi 802.11 b\/g\/n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio formats:\u003c\/strong\u003e FLAC, WAV, AIFF, Apple Lossless, AAC, MP3, WMA, OGG, Monkey's Audio, MQA (via Roon) – up to 24-bit\/192 kHz, including gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB Type B (asynchronous, up to 24-bit\/192 kHz), 1× coaxial RCA, 1× optical Toslink (up to 24-bit\/96 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e 4.2 with aptX HD (up to 24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× unbalanced RCA (20 kΩ), 1× balanced XLR (40 kΩ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs 1× XLR and 1× RCA (75 Ω), volume-controlled; input 1 switchable to fixed level via Direct\/HT mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none – connect a headphone amplifier to the line outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby \/ 23 W idle \/ max. 1000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic aluminium housing, high-gloss lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, RC-5 remote control with CR2032 battery, Bluetooth antenna, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does NPM stand for on the Gato Audio DIA-250S?\u003c\/h3\u003e\u003cp\u003eNPM is short for Network Player Module. That's the network module Gato Audio integrates into the DIA-250S at the factory. It delivers Ethernet and Wi-Fi, Roon Ready certification, DLNA\/UPnP as well as Tidal, Qobuz and Deezer. A DIA-250S without NPM remains an integrated amplifier with a DAC, but doesn't stream.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DIA-250S NPM and the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eThe power. The DIA-250S NPM delivers 2× 250 W at 8 Ω, the DIA-400S NPM 2× 400 W. The converter, network module and connection panel are the same on both. In normal to large living rooms, the 250S has plenty of reserve; the 400S is worthwhile for very large rooms or speakers that are hard to drive.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eNo, the DIA-250S NPM has no headphone output. For headphones, you connect a separate headphone amplifier to the controlled line outputs, balanced via XLR or unbalanced via RCA. You can mute the speaker outputs with a long press on the standby button, so only the headphones play.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the DIA-250S NPM available in?\u003c\/h3\u003e\u003cp\u003eGato Audio offers the DIA-250S NPM with a high-gloss lid in white, in black, or in genuine walnut veneer. There's also the custom colour option as an individual high-gloss finish. This page shows the white version. All four variants are technically identical – the colour changes nothing about power, converter or connections.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-250S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we don't just sell you a device, we get it running. We discuss network, Roon, streaming services and the right speaker combination together with you – as an authorised dealer with an experienced team and our own technician in Wädenswil. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFor 2× 250 watts you'll find matching partners among the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. If you listen quietly in the evenings, connect a \u003ca href=\"\/en\/collections\/kopfhorerverstarker\"\u003eheadphone amplifier\u003c\/a\u003e to the line outputs – and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e belong there anyway.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989506978128,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-250s-npm-streaming-verstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785897955"},{"product_id":"gatoaudiodia250snpmwn","title":"Gato Audio DIA-250S NPM Streaming Amplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-250S NPM is a streaming integrated amplifier with 2× 250 watts that combines power amp, D\/A converter and network player in a single housing.\u003c\/p\u003e\u003cp\u003eNPM isn't a model number here, but stands for \u003cstrong\u003eNetwork Player Module\u003c\/strong\u003e – Gato Audio's network module that turns the amplifier into a Roon Ready streamer. Instead of stacking a streamer, a converter and an amplifier on top of each other, you get exactly one unit. This version has a lid of genuine walnut veneer under high-gloss lacquer.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-250S NPM?\u003c\/h2\u003e\u003cp\u003eBecause substance and convenience aren't mutually exclusive here. 2× 250 W at 8 Ω and 2× 500 W at 4 Ω from a Class-D power stage drive even a large floorstander with authority. Conversion is handled by a Burr-Brown PCM1794, which upsamples every digital source to 24-bit\/192 kHz. The Network Player Module plays Tidal, Qobuz and Deezer, finds your NAS via DLNA\/UPnP, and registers on the network as a Roon endpoint. Two analog inputs, USB, coax, Toslink and Bluetooth with aptX HD are also on board. In short: there's little that can't be connected here.\u003c\/p\u003e\u003ch2\u003eWhat you experience\u003c\/h2\u003e\u003cp\u003eA unit that doesn't look like technology in the living room, yet sounds like technology in the best sense. The walnut veneer gives the aluminium housing warmth without smelling of retro. Sonically, the DIA-250S NPM stays calm and controlled: firm bass, clean midrange, a background where simply nothing hisses. And if you don't want to subscribe to a streaming service, you're not missing anything essential – internet radio, NAS, USB and the analog inputs work entirely independently of that.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-250S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the DIA-250S NPM suits you if your living room and your system share the same space and both need to look good. It suits you less if you already own a separate high-end DAC or streamer – then you'd be paying for built-in technology you don't even use. Vinyl fans need an additional phono preamp, since a phono stage is missing. And if you're filling a very large room or running low-efficiency speakers, you're better served by the DIA-400S NPM.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe DIA-250S NPM is the rare combination of furniture piece and powerhouse. If you want a full-grown system without your living room looking like a server room, this is the right choice. At HD Zürisee in Wädenswil we check beforehand whether room, speakers and network work together – that saves surprises after delivery.\u003c\/p\u003e\u003cp\u003e\u003cem\u003e\"This is a remarkably well-sorted and extremely flexible amplifier, with a sound treading a confident path between power and poise, drama and delicacy.\"\u003c\/em\u003e – Hi-Fi News, 2019 (Sound Quality 88%)\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with DAC and network player (NPM = Network Player Module)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 250 W at 8 Ω \/ 2× 500 W at 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower stage:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (±0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player (NPM):\u003c\/strong\u003e Roon Ready, DLNA\/UPnP, Tidal, Qobuz and Deezer built in; controlled via the mconnect Control app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (RJ45) or Wi-Fi 802.11 b\/g\/n (2.4 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio formats:\u003c\/strong\u003e FLAC, WAV, AIFF, Apple Lossless, AAC, MP3, WMA, OGG, Monkey's Audio, MQA (via Roon) – up to 24-bit\/192 kHz, including gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB Type B (asynchronous, up to 24-bit\/192 kHz), 1× coaxial RCA, 1× optical Toslink (up to 24-bit\/96 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e 4.2 with aptX HD (up to 24-bit\/48 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× unbalanced RCA (20 kΩ), 1× balanced XLR (40 kΩ)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs 1× XLR and 1× RCA (75 Ω), volume-controlled; input 1 switchable to fixed level via Direct\/HT mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none – connect a headphone amplifier to the line outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby \/ 23 W idle \/ max. 1000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic aluminium housing, high-gloss lid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut high gloss (genuine veneer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, RC-5 remote control with CR2032 battery, Bluetooth antenna, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat does NPM stand for on the Gato Audio DIA-250S?\u003c\/h3\u003e\u003cp\u003eNPM isn't a model number, it stands for Network Player Module. Gato Audio uses it to build a network player directly into the DIA-250S: Ethernet and Wi-Fi, Roon Ready, DLNA\/UPnP as well as Tidal, Qobuz and Deezer. Without this module, the amplifier would still be a DAC integrated amplifier, but not a streamer.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DIA-250S NPM and the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003ePrimarily the output power: 2× 250 W at 8 Ω for the DIA-250S NPM versus 2× 400 W for the DIA-400S NPM. The network module, D\/A converter and connections are the same. The 250S covers normal to large living rooms with reserve; the 400S is meant for very large rooms or difficult speakers.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eNot directly, since there's no headphone output. Instead, you use the line outputs in XLR or RCA, which follow the volume control, and connect a headphone amplifier there. To keep the speakers silent while doing so, you switch them off with a long press on the standby button.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the DIA-250S NPM available in?\u003c\/h3\u003e\u003cp\u003eThe DIA-250S NPM comes with a lid of genuine walnut veneer, in black high gloss or in white high gloss. It can also be finished in high gloss in an individual custom colour. This page shows the walnut version. The four variants don't differ technically – it's purely about looks.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-250S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming amplifier is more than a box in a carton. We advise you on room, placement, speaker match and network, handle the warranty correctly as an authorised dealer, and deliver on request including installation by our own technician. A call, an email or a WhatsApp message is all it takes.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eWarm-voiced \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e suit the walnut lid just as well as compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. For the analog side, you'll find the right complement among the \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and in the \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e selection.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507010896,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-250s-npm-streaming-verstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785897990"},{"product_id":"gatoaudiodia400snpmbl","title":"Gato Audio DIA-400S NPM Streaming Amplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-400S NPM is a streaming integrated amplifier that combines power amp, D\/A converter and network player in a single housing.\u003c\/p\u003e\u003cp\u003e2× 400 watts at 8 ohms, a Roon Ready network player and a 24-bit\/192 kHz converter are built in at the factory. You connect speakers and network, and the system is ready. The high-gloss black lid turns it into a piece of furniture you don't need to hide.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-400S NPM?\u003c\/h2\u003e\u003cp\u003eBecause it bundles a complete chain into one unit and still has reserves where other all-in-one solutions run out of breath. The Class-D power stage delivers 2× 400 W at 8 Ω and doubles to 2× 800 W at 4 Ω – so it stays composed even when your speakers really dig in on the bass. The Burr-Brown converter works with upsampling up to 24-bit\/192 kHz, the network section is Roon Ready and brings in Tidal, Qobuz and Deezer via LAN or Wi-Fi. Add to that two RCA pairs and one XLR pair for anything that should stay analog.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eA calm, controlled sound with firmly defined bass and plenty of headroom above – whether the music comes from a streaming service, the USB input, or an external phono stage. The DIA-400S NPM doesn't sound like a compromise despite replacing three devices, and it stays cool and quiet while doing so. That's not a given with this much power.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-400S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the DIA-400S NPM is built for large rooms and demanding speakers, when you want amplifier, converter and streamer in one tidy housing. For normal living rooms with efficient speakers, the smaller DIA-250S NPM with 2× 250 W is easily enough. And if you already own a good converter or streamer and are only looking for power, you're better served by the purely analog Gato AMP-150 AE.\u003c\/p\u003e\u003ch3\u003eDo I really need 2× 400 watts?\u003c\/h3\u003e\u003cp\u003eNot everyone does. Power pays off especially with a large room volume, low efficiency and impedance-critical speakers – that's where the DIA-400S stays assured while smaller amplifiers audibly run out of steam. Honestly: someone listening to quiet jazz in a 20-square-metre room is buying the reserve for peace of mind. That's a reason too.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA complete, powerful system hub in Danish understatement – streaming, conversion and plenty of power-amp muscle without a stack of components or a cable mess. At HD Zürisee in Wädenswil we set up network, services and speakers together with you, so the unit plays to its full potential from day one.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with D\/A converter and network player\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 400 W at 8 Ω \/ 2× 800 W at 4 Ω (Class D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, 24-bit\/192 kHz with upsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e Roon Ready, app control, DLNA\/UPnP; Tidal, Qobuz and Deezer built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (LAN) or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e MQA (via Roon), FLAC, WAV, AIFF, Apple Lossless, WMA, MP3, AAC, OGG, Monkey's Audio; gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B (asynchronous), 1× coaxial (RCA), 1× optical (Toslink); USB and coax up to 24-bit\/192 kHz, Toslink up to 24-bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD, 24-bit\/48 kHz (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× RCA stereo (unbalanced), 1× XLR stereo (balanced, gold-plated Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA stereo and 1× XLR stereo, factory-configured as pre-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs in RCA and XLR; volume controlled at the unit and via remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (one pair per channel, banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 3.5 mm link jack for system control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e white LED dot-matrix display, dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (–0.5 dB); 2 Hz – 70 kHz (–3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 35 W, max. 1600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-3 remote control with battery, antennas for Bluetooth and Wi-Fi, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the DIA-400S NPM and the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eThe power. The DIA-400S NPM delivers 2× 400 W at 8 Ω and 2× 800 W at 4 Ω, the DIA-250S NPM 2× 250 W and 2× 500 W. Housing dimensions, converter, Roon Ready streaming, Bluetooth and connection panel are identical. The 400S is the choice for large rooms and demanding speakers.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eNo, the DIA-400S NPM has no headphone output. If headphones are part of your daily routine, you connect a separate headphone amplifier to the line outputs – or take a look at the Gato SDA-1, which combines a converter and headphone amplifier in one unit. We'll show you the sensible routes.\u003c\/p\u003e\u003ch3\u003eDo I need a streaming subscription for the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eNo. Tidal, Qobuz and Deezer are built in if you want to use them – none of the services is mandatory. Your own files are retrieved by the amplifier via DLNA\/UPnP from the network, plus USB, Toslink, coax, Bluetooth and two analog input pairs. So it plays just as well without a subscription.\u003c\/p\u003e\u003ch3\u003eCan I connect an active subwoofer or an additional power amp?\u003c\/h3\u003e\u003cp\u003eYes, that's what the line outputs in RCA and XLR are for, which Gato configures as pre-out. Whether their level follows the volume control or stays fixed is something we clarify bindingly before ordering – that's especially crucial with a power amp. Just tell us what you'd like to add.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-400S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming amplifier only becomes a joy once network, services and speakers work together. That's exactly where our experienced team in Wädenswil helps: advice on room and speakers, setting up Roon and the app, delivery, installation and service by our own technician. Call, write or reach us via WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eMatching \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e, compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, decent \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e for the analog side.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507043664,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-400s-npm-streaming-verstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785897567"},{"product_id":"gatoaudiodia400snpmcu","title":"Gato Audio DIA-400S NPM Streaming Amplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-400S NPM is a streaming integrated amplifier that combines power amp, D\/A converter and network player in a single housing – here with a high-gloss lid in your custom colour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the images:\u003c\/strong\u003e the orange-finished unit in the first photo is Gato's sample piece for the custom-colour option, not a fixed delivery colour. You choose the shade freely – from a muted grey to the exact tone of your sideboard. Technically the unit is identical to the standard finishes: 2× 400 watts at 8 ohms, a Roon Ready network player and a 24-bit\/192 kHz converter, built in at the factory.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DIA-400S NPM?\u003c\/h2\u003e\u003cp\u003eBecause you get three devices in one and still lose none of the power. The Class-D power stage provides 2× 400 W at 8 Ω and doubles to 2× 800 W at 4 Ω – reserves you don't need constantly, but hear at the right moment. The Burr-Brown converter runs with upsampling up to 24-bit\/192 kHz, the network section is Roon Ready and brings Tidal, Qobuz and Deezer into the shelf via LAN or Wi-Fi. On the analog side, two RCA pairs and one XLR pair are ready and waiting.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA system hub that stays clean and controlled sonically and looks exactly the way you want it visually. The high-gloss lacquer is applied by Gato in Denmark; the aluminium housing, the dot-matrix display and the connection panel remain unchanged. A unit you put in the living room instead of banishing to a cabinet – and that's exactly what the custom colour is for.\u003c\/p\u003e\u003ch3\u003eWho is the DIA-400S NPM suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the custom colour is worthwhile if the unit stands in view and needs to match your decor, and if you also need power for large rooms and demanding speakers. If you're putting the unit in a rack anyway, black, white or walnut are the more affordable route. If 2× 250 W is enough for you, the smaller DIA-250S NPM is the more sensible purchase – it's also available in a custom colour.\u003c\/p\u003e\u003ch3\u003eHow does a custom finish work?\u003c\/h3\u003e\u003cp\u003eYou tell us the shade you want, we check it with the distributor, and confirm before you order what's feasible and how long the finishing will take. A unit in your custom colour is made specifically for you – which is why we'd rather discuss the shade once too often beforehand than once too little.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe most powerful all-in-one solution in the DIA series, plus a housing that adapts to your living space instead of the other way around. At HD Zürisee in Wädenswil we accompany you from choosing the colour through the speakers to a fully set-up streaming experience – so that in the end both the look and the sound are right.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with D\/A converter and network player\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 400 W at 8 Ω \/ 2× 800 W at 4 Ω (Class D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, 24-bit\/192 kHz with upsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e Roon Ready, app control, DLNA\/UPnP; Tidal, Qobuz and Deezer built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (LAN) or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e MQA (via Roon), FLAC, WAV, AIFF, Apple Lossless, WMA, MP3, AAC, OGG, Monkey's Audio; gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B (asynchronous), 1× coaxial (RCA), 1× optical (Toslink); USB and coax up to 24-bit\/192 kHz, Toslink up to 24-bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD, 24-bit\/48 kHz (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× RCA stereo (unbalanced), 1× XLR stereo (balanced, gold-plated Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA stereo and 1× XLR stereo, factory-configured as pre-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs in RCA and XLR; volume controlled at the unit and via remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (one pair per channel, banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 3.5 mm link jack for system control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e white LED dot-matrix display, dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (–0.5 dB); 2 Hz – 70 kHz (–3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 35 W, max. 1600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom colour high gloss (individual finish made to order)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-3 remote control with battery, antennas for Bluetooth and Wi-Fi, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the orange unit in the photo the delivery colour?\u003c\/h3\u003e\u003cp\u003eNo. Orange is Gato's sample finish used to show the custom-colour option. You choose the shade yourself, and the amplifier is delivered in your custom colour in high gloss. Technically it matches the standard finishes in black, white and walnut exactly – only the look changes.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DIA-400S NPM and the DIA-250S NPM?\u003c\/h3\u003e\u003cp\u003eThe power-amp output. The DIA-400S NPM delivers 2× 400 W at 8 Ω and 2× 800 W at 4 Ω, the DIA-250S NPM 2× 250 W and 2× 500 W. Dimensions, converter, Roon Ready streaming, Bluetooth and connections are the same on both. The 400S is meant for large rooms and demanding speakers.\u003c\/p\u003e\u003ch3\u003eCan I connect headphones to the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eNo, there's no headphone output. For headphone use, you connect your own headphone amplifier to the line outputs; in the Gato lineup, the SDA-1 fits well here, combining a converter and headphone amplifier and speaking the same visual language. We'll tell you what suits your headphones.\u003c\/p\u003e\u003ch3\u003eDo I need a streaming subscription for the DIA-400S NPM?\u003c\/h3\u003e\u003cp\u003eNo. Tidal, Qobuz and Deezer are on board if you want to use them – none of the services is required. Music from your own network arrives via DLNA\/UPnP, plus USB, Toslink, coax, Bluetooth and two analog input pairs. Even with no ongoing costs at all, you have a fully-fledged system.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DIA-400S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a custom finish needs advice before it's ordered – and a streaming amplifier needs advice afterwards. We clarify shade, lead time, speaker match and network with you, deliver and install on site, and take care of service with our own technician. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eColour-matched \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, decent \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e and – if vinyl is part of the picture – a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e with a matching \u003ca href=\"\/en\/collections\/phono-vorverstarker\"\u003ephono stage\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507076432,"sku":null,"price":4895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-400s-npm-streaming-verstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785897593"},{"product_id":"gatoaudiodia400snpmwh","title":"Gato Audio DIA-400S NPM Streaming Amplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-400S NPM is a streaming integrated amplifier that combines power amp, D\/A converter and network player in a single housing.\u003c\/p\u003e\n\u003cp\u003eWhite high gloss is the finish for bright living spaces: the amplifier visually disappears until you switch it on. Underneath is the full DIA-series specification – 2× 400 watts at 8 ohms, a Roon Ready network player and a 24-bit\/192 kHz converter, built in at the factory. Connect speakers and network, and you're done.\u003c\/p\u003e\n\u003ch2\u003eWhy the Gato Audio DIA-400S NPM?\u003c\/h2\u003e\n\u003cp\u003eBecause it replaces an entire chain without holding anything back. The Class-D power stage provides 2× 400 W at 8 Ω and steps up to 2× 800 W at 4 Ω – it stays composed even when a speaker really draws current in the bass. The Burr-Brown converter computes with upsampling up to 24-bit\/192 kHz, the network section is Roon Ready and brings in Tidal, Qobuz and Deezer via LAN or Wi-Fi. Two RCA pairs and one XLR pair are ready for analog sources.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eQuiet in the background, tight, well-defined bass and an image that doesn't collapse even at higher levels. Whether the music comes from the network, the USB input or an analog source, you'll barely notice a difference in character – and for a unit that does everything itself, that's precisely the achievement.\u003c\/p\u003e\n\u003ch3\u003eWho is the DIA-400S NPM suited to – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the DIA-400S NPM suits large rooms, demanding speakers and the wish to have amplifier, converter and streamer in a single housing. In a normal living room with efficient speakers, the smaller DIA-250S NPM with 2× 250 W does just as well. If you already have a good converter or streamer in the rack and are only looking for power, the purely analog Gato AMP-150 AE is the better choice.\u003c\/p\u003e\n\u003ch3\u003eDoes white high gloss yellow over time?\u003c\/h3\u003e\n\u003cp\u003eThe lid has a multi-layer high-gloss lacquer and is treated like a piano-lacquer surface: dust it with a soft, slightly damp cloth, no abrasives, no alcohol. Direct, constant sunlight doesn't agree with any lacquer – that applies to white units just as much as to the sideboard underneath.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003ePlenty of power amp, a complete digital section, a housing that doesn't stand out as a technical block in bright rooms – the tidiest way to build a large system. At HD Zürisee in Wädenswil we set up network, services and speakers together with you, instead of just handing you a box.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with D\/A converter and network player\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 400 W at 8 Ω \/ 2× 800 W at 4 Ω (Class D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, 24-bit\/192 kHz with upsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e Roon Ready, app control, DLNA\/UPnP; Tidal, Qobuz and Deezer built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (LAN) or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e MQA (via Roon), FLAC, WAV, AIFF, Apple Lossless, WMA, MP3, AAC, OGG, Monkey's Audio; gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B (asynchronous), 1× coaxial (RCA), 1× optical (Toslink); USB and coax up to 24-bit\/192 kHz, Toslink up to 24-bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD, 24-bit\/48 kHz (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× RCA stereo (unbalanced), 1× XLR stereo (balanced, gold-plated Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA stereo and 1× XLR stereo, factory-configured as pre-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs in RCA and XLR; volume controlled at the unit and via remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (one pair per channel, banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 3.5 mm link jack for system control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e white LED dot-matrix display, dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (–0.5 dB); 2 Hz – 70 kHz (–3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 35 W, max. 1600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-3 remote control with battery, antennas for Bluetooth and Wi-Fi, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the DIA-400S NPM and the DIA-250S NPM?\u003c\/h3\u003e\n\u003cp\u003eJust the power. The DIA-400S NPM delivers 2× 400 W at 8 Ω and 2× 800 W at 4 Ω, the DIA-250S NPM 2× 250 W and 2× 500 W. Housing dimensions, converter, Roon Ready streaming, Bluetooth and connection panel are the same. You choose the 400S for large rooms and demanding speakers.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the DIA-400S NPM?\u003c\/h3\u003e\n\u003cp\u003eNo, there's no headphone output on this amplifier. If you want to listen via headphones regularly, connect your own headphone amplifier to the line outputs – the Gato SDA-1, for instance, which combines a converter and headphone amplifier. We'll find you the combination that suits your headphones.\u003c\/p\u003e\n\u003ch3\u003eDo I need a streaming subscription for the DIA-400S NPM?\u003c\/h3\u003e\n\u003cp\u003eNo. You can use Tidal, Qobuz and Deezer, but you don't have to. The amplifier plays your own music files from the network via DLNA\/UPnP, plus USB, Toslink, coax, Bluetooth and two analog input pairs. A subscription is an option, not a requirement.\u003c\/p\u003e\n\u003ch3\u003eCan I connect an active subwoofer or an additional power amp?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what the line outputs in RCA and XLR are for, which Gato configures as pre-out. We'll confirm before you order whether their level follows the volume control or stays fixed – for a power amp, that's exactly the point that matters. Tell us what you want to add.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gato Audio DIA-400S NPM at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the box alone isn't a system yet. We clarify room, speakers and network with you, set up Roon and the app, deliver and install on site, and have our own technician in-house for service. Almost three decades of experience go into this advice. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eBright \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e or \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e on matching \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, plus decent \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507109200,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-400s-npm-streaming-verstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785897615"},{"product_id":"gatoaudiodia400snpmwn","title":"Gato Audio DIA-400S NPM Streaming Amplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio DIA-400S NPM is a streaming integrated amplifier that combines power amp, D\/A converter and network player in a single housing.\u003c\/p\u003e\n\u003cp\u003eThe high-gloss-polished walnut lid is what defines this version: warm wood on cool aluminium, real veneer instead of foil. Technically you get the full DIA specification – 2× 400 watts at 8 ohms, a Roon Ready network player and a 24-bit\/192 kHz converter, built in at the factory.\u003c\/p\u003e\n\u003ch2\u003eWhy the Gato Audio DIA-400S NPM?\u003c\/h2\u003e\n\u003cp\u003eBecause a complete chain sits in one housing here, without anyone skimping on the power amp. The Class-D power stage delivers 2× 400 W at 8 Ω and doubles to 2× 800 W at 4 Ω – reserves you'll hear with demanding speakers and simply enjoy otherwise. The Burr-Brown converter works with upsampling up to 24-bit\/192 kHz, the network section is Roon Ready and plays Tidal, Qobuz and Deezer via LAN or Wi-Fi. Two RCA pairs and one XLR pair stay free for analog sources.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA unit that passes for furniture in a living space and is still the whole system. Sonically that means: a quiet background, dry bass, clean separation even when it gets loud. And because the amplifier stays cool and quiet, it's also allowed to stand where you can see it – with a walnut lid, anything else would be a waste.\u003c\/p\u003e\n\u003ch3\u003eWho is the DIA-400S NPM suited to – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the DIA-400S NPM is made for large rooms, demanding speakers and the wish for a single unit instead of a stack of devices. In normal living rooms with efficient speakers, the smaller DIA-250S NPM with 2× 250 W is entirely sufficient. And if you already own a good converter or streamer and are looking for pure power, the purely analog Gato AMP-150 AE is the better choice.\u003c\/p\u003e\n\u003ch3\u003eIs the walnut lid real wood?\u003c\/h3\u003e\n\u003cp\u003eYes, Gato uses real walnut wood veneer under several layers of clear lacquer, polished to a high gloss. Every unit therefore has a slightly individual grain – two units never look exactly alike. Care is the same as for a piano-lacquer piece of furniture: soft cloth, no abrasives, no alcohol.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most powerful system hub in the DIA series in its warmest finish – streaming, converter and plenty of power-amp output under a wooden lid that lets you forget the technology. At HD Zürisee in Wädenswil we set up network, services and speakers together with you, so that music plays instead of configuration from day one.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming integrated amplifier with D\/A converter and network player\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 400 W at 8 Ω \/ 2× 800 W at 4 Ω (Class D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e Burr-Brown PCM1794, 24-bit\/192 kHz with upsampling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e Roon Ready, app control, DLNA\/UPnP; Tidal, Qobuz and Deezer built in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet (LAN) or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e MQA (via Roon), FLAC, WAV, AIFF, Apple Lossless, WMA, MP3, AAC, OGG, Monkey's Audio; gapless playback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B (asynchronous), 1× coaxial (RCA), 1× optical (Toslink); USB and coax up to 24-bit\/192 kHz, Toslink up to 24-bit\/96 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD, 24-bit\/48 kHz (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog inputs:\u003c\/strong\u003e 2× RCA stereo (unbalanced), 1× XLR stereo (balanced, gold-plated Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA stereo and 1× XLR stereo, factory-configured as pre-out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e line outputs in RCA and XLR; volume controlled at the unit and via remote control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 pairs of gold-plated binding posts (one pair per channel, banana-compatible)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional connections:\u003c\/strong\u003e 3.5 mm link jack for system control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e white LED dot-matrix display, dimmable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (–0.5 dB); 2 Hz – 70 kHz (–3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB (+10 dB headroom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 35 W, max. 1600 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss (real wood veneer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e amplifier, power cable, Gato Audio RC-3 remote control with battery, antennas for Bluetooth and Wi-Fi, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the DIA-400S NPM and the DIA-250S NPM?\u003c\/h3\u003e\n\u003cp\u003eThe power amp. The DIA-400S NPM delivers 2× 400 W at 8 Ω and 2× 800 W at 4 Ω, the DIA-250S NPM 2× 250 W and 2× 500 W. In dimensions, converter, Roon Ready streaming, Bluetooth and connections they're identical. The 400S is the choice for large rooms and demanding speakers.\u003c\/p\u003e\n\u003ch3\u003eCan I connect headphones to the DIA-400S NPM?\u003c\/h3\u003e\n\u003cp\u003eNo, there's no headphone output on this model. For headphone use, connect your own headphone amplifier to the line outputs; from the same maker, the Gato SDA-1 fits well, combining a converter and headphone amplifier. Tell us which headphones you use, and we'll find the combination.\u003c\/p\u003e\n\u003ch3\u003eDo I need a streaming subscription for the DIA-400S NPM?\u003c\/h3\u003e\n\u003cp\u003eNo. Tidal, Qobuz and Deezer are built in if you want to use them – none of the services is required. The amplifier retrieves your own files from the network via DLNA\/UPnP, plus USB, Toslink, coax, Bluetooth and two analog input pairs. Even without a subscription, you have a fully-fledged system.\u003c\/p\u003e\n\u003ch3\u003eCan I connect an active subwoofer or an additional power amp?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what the line outputs in RCA and XLR are for, which Gato configures as pre-out. We clarify for you before you order whether their level follows the volume control or stays fixed – for a power amp, quite a lot hinges on that. Tell us what you want to add to the system.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Gato Audio DIA-400S NPM at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know which units prove themselves in everyday use and which combinations work well together. We advise on room, speakers and network, set up Roon and the app, deliver and install on site, and our own technician is on hand for service. Call, email, or use WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e with real wood veneer, compact \u003ca href=\"\/en\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, matching \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e for the analog side.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507141968,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dia-400s-npm-streaming-verstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785897637"},{"product_id":"gatoaudiodpa2506bl","title":"Gato Audio DPA-2506 Multichannel Power Amplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio DPA-2506 is a configurable six-channel power amplifier that combines three Class-D modules in a single housing and can be set up anywhere from a bridged powerhouse to a six-zone hub.\u003c\/p\u003e\u003cp\u003eEach of the three modules drives two channels – used individually or bridged when a speaker demands more current than is actually good for it. The inputs are balanced via XLR and unbalanced via RCA, six speaker pairs wait on the back, and a 12-volt trigger wakes the power amp together with the rest of the system. This version comes in black high gloss – the classic that disappears into the rack instead of pushing itself forward. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-2506?\u003c\/h2\u003e\u003cp\u003eBecause with a single unit you decide how power is distributed around the house. Six channels for three stereo zones, bridged pairs for hungry speakers, or a mix of both: the split follows your floor plan, not the product brochure. That makes the DPA-2506 a calm foundation for custom-install systems where another room gets added later.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eDistributable power with reserves. In six-channel operation, 250 watts at 8 ohms per channel are available, bridged it's up to 900 watts at 8 ohms on one channel. Class D keeps efficiency high and heat output low – the unit draws 75 watts at idle, under one watt in standby. The non-magnetic housing and balanced signal path keep the channels cleanly separated, which in a tightly packed equipment cabinet isn't a luxury, but a requirement.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-2506 suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eFor multiroom installations, larger home cinemas, and systems where a central power amp supplies several pairs of speakers. Straight talk: for a classic stereo chain in the living room, the DPA-2506 is two sizes too big – an integrated amplifier or a stereo power amp is enough there. If you're only powering one room, you're paying for flexibility you'll never use. Once a second and third zone are added, the argument flips around.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eAn honest, unfussy multichannel power amp that draws its strength from configurability rather than big words. Built with Danish restraint, cleanly laid out, pleasantly quiet in operation. At HD Zürisee in Wädenswil we plan the channel split together with you – and just as honestly tell you when a smaller solution is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e configurable multichannel power amplifier, 6 channels, Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier modules:\u003c\/strong\u003e 3 modules, bridgeable in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 6× 250 W · 3× 900 W (bridged) · 2× 900 W + 2× 250 W · 1× 900 W + 4× 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 6× 500 W · 3× 1050 W (bridged) · 2× 1050 W + 2× 500 W · 1× 1050 W + 4× 500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced inputs:\u003c\/strong\u003e 3 pairs XLR, gold-plated (Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced inputs:\u003c\/strong\u003e 3 pairs RCA, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 6 pairs of gold-plated safety binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby, 75 W idle, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many speakers can the DPA-2506 drive?\u003c\/h3\u003e\u003cp\u003eIn six-channel operation, six individual channels – so up to three stereo pairs across different zones. If you bridge modules, the channel count drops in favour of power per channel: three bridged channels at 900 watts each at 8 ohms are just as possible as mixed splits of powerful and normal channels.\u003c\/p\u003e\u003ch3\u003eCan I split the channels freely?\u003c\/h3\u003e\u003cp\u003eYes. The three amplifier modules can be used individually as six channels, fully bridged, or mixed – for example two powerful bridged channels plus two normal ones. Bi-amping a pair of speakers is also possible this way. We work out with you beforehand which configuration suits your rooms.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamp?\u003c\/h3\u003e\u003cp\u003eYes. The DPA-2506 is a pure power amplifier with no volume control and no source selection. It needs a preamp, an integrated amplifier with a preamp output, or an AV preamp ahead of it. The inputs accept balanced XLR and unbalanced RCA signals.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-2506 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a configurable multichannel power amp needs planning, not just a shopping cart. We work out the channel split for your rooms with you, clarify cabling and trigger control, and our technician Mauri handles the on-site installation. Call or write to us.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the matching preamp under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003epreamplifiers\u003c\/a\u003e, speakers for the individual zones under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/wandlautsprecher\"\u003ein-wall speakers\u003c\/a\u003e. For wiring six channels, it's worth a look at \u003ca href=\"\/en\/collections\/kabel\"\u003ecables \u0026amp; connectors\u003c\/a\u003e, and for the movie side, the \u003ca href=\"\/en\/collections\/heimkino\"\u003ehome cinema\u003c\/a\u003e overview. More power amps are listed under \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507174736,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-2506-mehrkanal-endverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785897140"},{"product_id":"gatoaudiodpa2506cu","title":"Gato Audio DPA-2506 Multichannel Power Amplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio DPA-2506 is a configurable six-channel power amplifier in Class-D technology that can be made to order in an individual high-gloss finish.\u003c\/p\u003e\u003cp\u003eTechnically this version is identical to the standard colours: three amplifier modules with two channels each, each pair bridgeable, inputs balanced via XLR and unbalanced via RCA, six speaker pairs on the connection panel and a 12-volt trigger for automatic switching on and off. The difference is in the finish: Gato paints the housing in your custom shade, always in high gloss. \u003cstrong\u003eThe image in the gallery shows a sample colour\u003c\/strong\u003e – you choose the actual custom colour freely. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-2506?\u003c\/h2\u003e\u003cp\u003eBecause here you decide freely twice over: once how power is distributed across your rooms, and once what colour the unit wears while doing it. Six individual channels for multiroom, bridged pairs for thirsty speakers, or a mix – plus a housing that adapts to your décor instead of the other way round. Not every power amp has to hide behind closed doors.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003ePower that you allocate yourself. In six-channel operation, 250 watts at 8 ohms each, bridged up to 900 watts at 8 ohms on one channel, at 4 ohms 500 or 1050 watts respectively. Total harmonic distortion under 0.01 percent at rated power, signal-to-noise ratio above 110 dB, frequency response reaching up to 70 kHz. The non-magnetic housing cleanly separates the modules, and Class D keeps heat output in check with 75 watts idle consumption.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-2506 suited to – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eFor multiroom systems, home cinemas and installations where a central unit supplies several pairs of speakers – and especially for projects where the electronics stay visible and need to match the colour scheme. Straight talk: for a pure stereo system in the living room, the power amp is oversized, and the custom finish extends the lead time. If you're in a hurry, a standard colour is the better route.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe most flexible variant of an already flexible power amp: six channels, freely configurable, in the colour of your choice. Technically flawless, visually as unobtrusive or as bold as you like. At HD Zürisee in Wädenswil we take note of your colour wish, check feasibility with the distributor, and plan the channel split right along with it.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e configurable multichannel power amplifier, 6 channels, Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier modules:\u003c\/strong\u003e 3 modules, bridgeable in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 6× 250 W · 3× 900 W (bridged) · 2× 900 W + 2× 250 W · 1× 900 W + 4× 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 6× 500 W · 3× 1050 W (bridged) · 2× 1050 W + 2× 500 W · 1× 1050 W + 4× 500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01% at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced inputs:\u003c\/strong\u003e 3 pairs XLR, gold-plated (Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced inputs:\u003c\/strong\u003e 3 pairs RCA, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 6 pairs of gold-plated safety binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby, 75 W idle, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e non-magnetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom colour, high gloss (image shows a colour sample)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat colour do I get with the custom-colour version?\u003c\/h3\u003e\u003cp\u003eWhichever one you choose. Gato paints the housing in your custom shade in high gloss. The image in the gallery merely shows a colour sample, not a fixed specification. We take note of your desired shade and clarify feasibility before you order.\u003c\/p\u003e\u003ch3\u003eHow many speakers does the DPA-2506 drive?\u003c\/h3\u003e\u003cp\u003eUp to six channels, so three stereo pairs across separate zones, at 250 watts at 8 ohms each. If you bridge modules, the channel count drops and power rises to up to 900 watts at 8 ohms per bridged channel. Mixed configurations are possible.\u003c\/p\u003e\u003ch3\u003eWhat do I need in addition to the DPA-2506?\u003c\/h3\u003e\u003cp\u003eA preamp, AV preamp or an integrated amplifier with a preamp output, since the power amp has neither volume control nor source selection. Plus speaker cable for the channels in use and XLR or RCA cable to the preamp. Nothing more is needed for operation.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-2506 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a custom finish and a multichannel configuration both benefit from advice. We take note of your colour wish, plan the channel split for your rooms with you, and accompany delivery and installation. Call, email, or get in touch via WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the preamp ahead of it under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003epreamplifiers\u003c\/a\u003e, speakers for the individual zones under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/wandlautsprecher\"\u003ein-wall speakers\u003c\/a\u003e. Cable for six channels is available under \u003ca href=\"\/en\/collections\/kabel\"\u003ecables \u0026amp; connectors\u003c\/a\u003e, components for the movie room under \u003ca href=\"\/en\/collections\/heimkino\"\u003ehome cinema\u003c\/a\u003e, and more powerhouses under \u003ca href=\"\/en\/collections\/endstufen\"\u003epower amplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507207504,"sku":null,"price":4895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-2506-mehrkanal-endverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785897140"},{"product_id":"gatoaudiodpa2506wh","title":"Gato Audio DPA-2506 Multi-Channel Power Amplifier, Gloss White","description":"\u003cp\u003eThe Gato Audio DPA-2506 is a six-channel power amplifier in Class-D design, whose three amplifier modules can be freely configured into three to six output channels.\u003c\/p\u003e\u003cp\u003eOne module serves two channels each. If you need more punch on one channel, bridge the pair; if you need width, run all six channels individually. Each channel pair accepts its signal either balanced via XLR or unbalanced via RCA, the rear panel has room for six speaker pairs, and a 12-volt trigger handles switching on and off. This version comes in gloss white and looks great where the electronics should stay light and not dominate. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-2506?\u003c\/h2\u003e\u003cp\u003eBecause six channels from one chassis save you three separate power amplifiers and a lot of cable clutter. You decide per module whether you want width or power – and you can revise that decision later as the system grows. For installations that develop over years, that is worth more than any single number on the spec sheet.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eControlled power, finely divisible. Six channels each deliver 250 watts into 8 ohms, bridged up to 900 watts into 8 ohms are available on one channel, and into 4 ohms the six-channel figure doubles to 500 watts. Add a signal-to-noise ratio above 110 dB and total harmonic distortion below 0.01 percent at rated power – figures at which the amplifier audibly steps into the background. The non-magnetic chassis keeps the modules apart from one another, and with 75 watts idle consumption the equipment cabinet stays pleasantly cool.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-2506 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor home cinemas, multiroom zones and custom installations where one central unit feeds several rooms or channels. Plainly put: anyone who simply wants to drive a stereo pair in the living room also buys four channels they will never switch on – a stereo power amplifier is the more sensible choice there. As a pure subwoofer amplifier, too, the DPA-2506 is over-qualified. Its territory begins where several zones are meant to play at once.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA workhorse with Danish manners: quiet, compact for what it holds, and remarkably flexible in channel allocation. Anyone planning a system across several rooms gets a lot of order here in little rack height. At HD Zürisee in Wädenswil we work out the configuration with you beforehand – so that in the end no channels are missing and none are left over.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e configurable multi-channel amplifier, 6 channels, Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier modules:\u003c\/strong\u003e 3 modules, bridgeable in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 6× 250 W · 3× 900 W (bridged) · 2× 900 W + 2× 250 W · 1× 900 W + 4× 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 6× 500 W · 3× 1050 W (bridged) · 2× 1050 W + 2× 500 W · 1× 1050 W + 4× 500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced inputs:\u003c\/strong\u003e 3 pairs XLR, gold-plated (Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced inputs:\u003c\/strong\u003e 3 pairs RCA, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 6 pairs gold-plated safety banana jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby, 75 W idle, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many channels does the DPA-2506 really have?\u003c\/h3\u003e\u003cp\u003eSix output channels, spread across three Class-D modules. Depending on configuration you keep six channels at 250 watts into 8 ohms each, or you bridge modules and get up to three channels at 900 watts each. Mixed forms of strong and normal channels are also possible.\u003c\/p\u003e\u003ch3\u003eIs the DPA-2506 suitable for bi-amping?\u003c\/h3\u003e\u003cp\u003eYes. Since each channel pair can be bridged or run individually, one speaker pair can be driven with separate channels for the tweeter and woofer sections. Whether your speaker supports this, we check together based on its connection panel.\u003c\/p\u003e\u003ch3\u003eCan I run the DPA-2506 without a preamplifier?\u003c\/h3\u003e\u003cp\u003eNo. It has neither volume control nor source switching and works exclusively behind a preamp, an AV preamp, or an integrated amplifier with a preamp output. Connection is made balanced via XLR or unbalanced via RCA, freely selectable per channel pair.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-2506 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause for nearly three decades we have been planning systems, not just shipping boxes. We work out channel allocation, speaker matching and control with you, take care of delivery and installation, and stay reachable afterwards too. Get in touch by phone, WhatsApp or email.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAhead of the DPA-2506 belongs a preamp – the selection is under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e. Speakers for the individual zones can be found under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/wandlautsprecher\"\u003eWall speakers\u003c\/a\u003e, the matching cabling under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e. Heading towards film, the \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e category helps; alternative powerhouses can be found under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507240272,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-2506-mehrkanal-endverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785897140"},{"product_id":"gatoaudiodpa2506wn","title":"Gato Audio DPA-2506 Multi-Channel Power Amplifier, Gloss Walnut","description":"\u003cp\u003eThe Gato Audio DPA-2506 is a configurable amplifier with six Class-D channels that works as a multiroom hub just as well as a powerful driver for a handful of demanding speakers.\u003c\/p\u003e\u003cp\u003eThree amplifier modules sit in the chassis, each with two channels, each bridgeable. Depending on need, this becomes a six-channel distributor for the whole house or a trio of powerful mono channels. Signals come in balanced via XLR or unbalanced via RCA, six speaker pairs go back out at the rear, and a 12-volt trigger makes sure the amplifier wakes up together with the system. This version carries genuine walnut veneer under gloss lacquer – an amplifier that cuts a fine figure even when it doesn't disappear into a cabinet. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-2506?\u003c\/h2\u003e\u003cp\u003eBecause it doesn't answer the question \"six small or three large channels\" for you – it leaves that to you. That very flexibility is what most multi-channel amplifiers lack: they deliver a fixed number of channels and that's that. The DPA-2506 can be reconfigured when a room is added, a speaker changes, or the multiroom project turns into a home cinema after all.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eReserves you allocate yourself. 250 watts into 8 ohms per channel in six-channel operation, up to 900 watts into 8 ohms on one bridged channel, and into 4 ohms 500 or 1050 watts respectively. The frequency response spans 2 Hz to 70 kHz, and total harmonic distortion stays below 0.01 percent at rated power. The non-magnetic chassis and balanced signal path make sure six channels in a tight space leave each other in peace.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-2506 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to feed several zones, a home cinema, or a bi-amplified chain from a single unit. Plainly put: as the heart of a simple stereo system it is simply too much of a good thing – an integrated amplifier or a stereo power amp is enough here, and the budget is better spent on speakers. Anyone who has no interest in configuration will also never use this unit's real strength.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe DPA-2506 is the rare combination of installation tool and living-room-worthy piece of furniture – dressed in walnut it may well stand in view. Technically clean, flexible, without showing off. At HD Zürisee in Wädenswil we work out the configuration together with you, and tell you honestly when a smaller amplifier would be the wiser choice for your project.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e configurable multi-channel amplifier, 6 channels, Class D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier modules:\u003c\/strong\u003e 3 modules, bridgeable in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 6× 250 W · 3× 900 W (bridged) · 2× 900 W + 2× 250 W · 1× 900 W + 4× 250 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 6× 500 W · 3× 1050 W (bridged) · 2× 1050 W + 2× 500 W · 1× 1050 W + 4× 500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced inputs:\u003c\/strong\u003e 3 pairs XLR, gold-plated (Neutrik)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnbalanced inputs:\u003c\/strong\u003e 3 pairs RCA, gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 6 pairs gold-plated safety banana jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby, 75 W idle, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e walnut veneer, gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow do I allocate the DPA-2506's power across my rooms?\u003c\/h3\u003e\u003cp\u003eThrough the configuration of the three modules. Each module delivers either two channels at 250 watts into 8 ohms each, or bridged, one channel at 900 watts. That gives you six weaker channels or three strong ones – and any mix in between.\u003c\/p\u003e\u003ch3\u003eHow warm does the DPA-2506 get in the rack?\u003c\/h3\u003e\u003cp\u003eThanks to Class-D technology, waste heat stays moderate: around 75 watts idle consumption, under one watt in standby. Even so, the usual rule for enclosed cabinets applies – leave air above and behind the unit. We're happy to help with rack planning.\u003c\/p\u003e\u003ch3\u003eWhich preamp suits the DPA-2506?\u003c\/h3\u003e\u003cp\u003eAny preamp, AV preamp, or integrated amplifier with a preamp output. The DPA-2506 itself has neither volume control nor source selection. Balanced via XLR is the more stable solution for long cable runs, unbalanced via RCA is enough for short distances within the same rack.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-2506 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause this unit only makes sense with the right planning. We go through it room by room with you, work out channel allocation and cabling, and set up the trigger control. Our practiced team of specialists delivers, installs, and stays reachable afterwards – just get in touch.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAs a signal source ahead of it, the units under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e are a good fit. Speakers for the zones being fed can be found under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/wandlautsprecher\"\u003eWall speakers\u003c\/a\u003e, cabling for six channels under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e. Anyone thinking of film should check out \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e, and anyone wanting to compare should look under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507961168,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-2506-mehrkanal-endverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785897156"},{"product_id":"gatoaudiodpa4004bl","title":"Gato Audio DPA-4004 Multi-Channel Power Amplifier, Gloss Black","description":"\u003cp\u003eThe Gato Audio DPA-4004 is a four-channel Class-D power amplifier whose channels can be used individually or bridged in pairs into more powerful channels.\u003c\/p\u003e\u003cp\u003eIt's built in Copenhagen, and it shows: non-magnetic chassis, gloss finish, four full-fledged amplifiers with their own switch-mode power supplies. Every input is available balanced as XLR and unbalanced as RCA, the speakers connect via four pairs of gold-plated terminals, and a 12-volt trigger wakes the unit together with the system. This version comes in deep gloss black.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-4004?\u003c\/h2\u003e\u003cp\u003eBecause it packs four amplifiers into one chassis and leaves it to you how the power is distributed: four channels for two zones, two bridged channels for thirsty speakers, or a mix of both. It shares its chassis and weight with the six-channel DPA-2506 – it redistributes the same footprint over fewer, but stronger channels.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003ePower that can be redistributed. In four-channel operation, 400 watts into 8 ohms are available per channel; bridged, that's 2× 800 watts, or mixed, 1× 800 watts plus 2× 400 watts – into 4 ohms, double that in each case. Add a frequency response spanning 2 hertz to 70 kilohertz, over 110 decibels of signal-to-noise ratio, and total harmonic distortion below 0.01 percent. Figures at which the amplifier stays in the background, where it belongs.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-4004 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor multiroom installations, home cinemas and bi-amping setups that want four powerful channels from a single unit. Plainly put: for a simple stereo system that's too much amplifier – that's what the AMP-150 or the PWR-222 monos are for. And anyone needing to feed more than four channels should reach for the DPA-2506.\u003c\/p\u003e\u003ch3\u003eHow does the DPA-4004 differ from the DPA-2506?\u003c\/h3\u003e\u003cp\u003eIn the number of channels and the power per channel: four channels at 400 watts into 8 ohms for the DPA-4004, six channels at 250 watts for the DPA-2506. How many zones and speakers you want to feed decides the question – not the model name.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA flexible four-channel amplifier that adapts to the system rather than the other way around: powerful, cleanly built, unobtrusive in operation. At HD Zürisee in Wädenswil we plan with you how the four channels get distributed across rooms and speakers – and tell you honestly when a smaller solution is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e four-channel amplifier, Class D, freely configurable (4, 3 or 2 channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 4× 400 W · 2× 800 W (bridged) · 1× 800 W + 2× 400 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 4× 800 W · 2× 1600 W (bridged) · 1× 1600 W + 2× 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4–16 Ω individually, 8–16 Ω bridged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) · 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 pairs XLR balanced (Neutrik, gold-plated) · 2 pairs RCA unbalanced (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 4 pairs gold-plated safety banana terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby · 75 W idle · 2000 W maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic, gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e power amplifier, power cable, mini-jack cable for the trigger, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many speakers does the Gato Audio DPA-4004 drive?\u003c\/h3\u003e\u003cp\u003eIn four-channel operation, four individual channels, so two stereo pairs across two zones. Two channels can be bridged into a more powerful one: that gives 2× 800 watts into 8 ohms, and a mixed 1× 800 watts plus 2× 400 watts is also possible. You trade channel count for power, exactly as your system needs it.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamp for the DPA-4004?\u003c\/h3\u003e\u003cp\u003eYes. The DPA-4004 is a pure power amplifier with no volume control and no source selection, and therefore needs a preamplifier or an AV preamp ahead of it. The Gato PRD-3S is a match both sonically and visually, as is any preamp or multiroom system with balanced or unbalanced preamp outputs.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DPA-4004 and the DPA-2506?\u003c\/h3\u003e\u003cp\u003eThe number of channels and the power per channel. The DPA-4004 delivers four channels at 400 watts into 8 ohms each, the DPA-2506 six channels at 250 watts each. Chassis, dimensions and weight are the same for both, so the decision comes down to the number of zones.\u003c\/p\u003e\u003ch3\u003eIs the DPA-4004 suitable for bi-amping?\u003c\/h3\u003e\u003cp\u003eYes. Each of the four channels can be addressed individually and connected either balanced or unbalanced, so the DPA-4004 drives one speaker pair with two channels each in bi-amping. This requires speakers with separate connection terminals – we check that together on your model beforehand.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-4004 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a multi-channel amplifier needs planning, and we provide it. As an authorized specialist dealer in Wädenswil, we work out the channel allocation with you, clarify preamp and cabling, and our technician Mauri sets up the system at your home. Call or write to us.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe DPA-4004 definitely needs a preamp – find one under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e. More powerhouses are under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e, matching partners under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e. For everything in between: \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989507993936,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-4004-mehrkanal-endverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785896839"},{"product_id":"gatoaudiodpa4004cu","title":"Gato Audio DPA-4004 Multi-Channel Power Amplifier, Custom Colour Gloss","description":"\u003cp\u003eThe Gato Audio DPA-4004 is a four-channel Class-D power amplifier whose channels can run individually or be bridged in pairs into more powerful channels.\u003c\/p\u003e\u003cp\u003eIt's developed and built in Copenhagen: non-magnetic chassis, four independent power amplifiers each with its own switch-mode power supply, gold-plated connections all round. Each channel accepts the signal balanced via XLR or unbalanced via RCA, and a 12-volt trigger brings the unit out of standby together with the system. For this version, Gato paints the unit in your custom colour of choice, always in gloss. The product photo shows an orange-lacquered sample – an example colour; you choose your own colour freely.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-4004?\u003c\/h2\u003e\u003cp\u003eBecause you decide where the power goes: four channels across two zones, two bridged channels for demanding speakers, or a mix of both. The same chassis also houses the six-channel DPA-2506 – the DPA-4004 simply redistributes the available power over fewer, but stronger channels. And because it matches your interior in colour instead of clashing with it.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eReserves you allocate yourself. Four channels each deliver 400 watts into 8 ohms; bridged, that becomes 2× 800 watts, mixed 1× 800 watts plus 2× 400 watts. Into 4 ohms, these figures each double. Frequency response up to 70 kilohertz, distortion below 0.01 percent, over 110 decibels of noise ratio: the amplifier stays out of the way and lets the speakers do the talking.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-4004 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor home cinemas, multiroom installations and bi-amping concepts that want four robust channels from one unit – especially where the unit stays visible and needs to match the colour scheme. Plainly put: anyone running just one stereo pair is better off with the AMP-150 or the PWR-222 monos. And from five channels upward, the road leads to the DPA-2506.\u003c\/p\u003e\u003ch3\u003eHow does the DPA-4004 differ from the DPA-2506?\u003c\/h3\u003e\u003cp\u003eMainly in the channel count: four channels at 400 watts into 8 ohms here, six channels at 250 watts there. Dimensions and weight are identical, so the decision comes down to the number of zones, not the footprint.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA four-channel amplifier that adapts both technically and visually to your system: configurable, powerful, and in your custom colour still coherent even when it stands openly in the room. At HD Zürisee in Wädenswil we clarify the shade with the manufacturer, plan the channel allocation, and tell you honestly if a size smaller would also do.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e four-channel amplifier, Class D, freely configurable (4, 3 or 2 channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 4× 400 W · 2× 800 W (bridged) · 1× 800 W + 2× 400 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 4× 800 W · 2× 1600 W (bridged) · 1× 1600 W + 2× 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4–16 Ω individually, 8–16 Ω bridged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) · 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 pairs XLR balanced (Neutrik, gold-plated) · 2 pairs RCA unbalanced (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 4 pairs gold-plated safety banana terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby · 75 W idle · 2000 W maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic, gloss custom colour (freely selectable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e power amplifier, power cable, mini-jack cable for the trigger, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many channels does the Gato Audio DPA-4004 have?\u003c\/h3\u003e\u003cp\u003eFour, and they're freely configurable. As a four-channel amplifier it feeds two stereo zones with 400 watts into 8 ohms each. Bridge two channels at a time and 2× 800 watts remain; mixed, it runs with 1× 800 watts plus 2× 400 watts. Into 4 ohms the figures double.\u003c\/p\u003e\u003ch3\u003eCan I choose the colour of the DPA-4004 freely?\u003c\/h3\u003e\u003cp\u003eYes, Gato Audio paints this version in your colour of choice, always in gloss. The photo shows an orange-lacquered sample as an example, not the delivered variant. Tell us your desired colour or a RAL shade, and we'll check feasibility and lead time with the manufacturer.\u003c\/p\u003e\u003ch3\u003eDo I need a preamplifier for the DPA-4004?\u003c\/h3\u003e\u003cp\u003eYes, absolutely. The amplifier has neither volume control nor source selection and only works behind a preamp. The Gato PRD-3S is a natural fit, as is any classic preamp, an AV preamp for home cinema, or multiroom systems with preamp outputs – balanced via XLR or unbalanced via RCA.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DPA-4004 and the DPA-2506?\u003c\/h3\u003e\u003cp\u003eThe DPA-4004 has four channels at 400 watts into 8 ohms each, the DPA-2506 six channels at 250 watts each. Both share chassis, dimensions and weight. Anyone feeding many zones takes the six-channel version; anyone wanting reserves per channel takes the DPA-4004.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-4004 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause with a custom finish, we know exactly what matters. We clarify the shade with the manufacturer, plan the channel allocation for your rooms, and prepare the installation. Questions about the room, speakers or preamp? Write to us or call us in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eNothing works without a preamp: check out \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e. Alternatives to the DPA-4004 can be found under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e, matching speakers under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e, the multi-channel chain under \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e, and the connections under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508026704,"sku":null,"price":4895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-4004-mehrkanal-endverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785896839"},{"product_id":"gatoaudiodpa4004wh","title":"Gato Audio DPA-4004 Multi-Channel Power Amplifier, Gloss White","description":"\u003cp\u003eThe Gato Audio DPA-4004 is a configurable four-channel power amplifier in Class-D technology, whose channel pairs can be bridged for more power.\u003c\/p\u003e\u003cp\u003eFour independent power amplifiers, each with its own switch-mode power supply, sit in a non-magnetic chassis from Copenhagen. The inputs are doubled up – balanced via gold-plated Neutrik XLR, unbalanced via gold-plated RCA – the speakers connect via four pairs of safety banana terminals, and a 12-volt trigger wakes the amplifier together with the rest of the chain. This version comes in gloss white.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-4004?\u003c\/h2\u003e\u003cp\u003eBecause four amplifiers in one chassis create order, and you distribute the power freely: two zones each with a stereo pair, two bridged channels for demanding speakers, or a combination of both. The six-channel DPA-2506 uses the same body – the DPA-4004 simply redistributes the power over fewer, but stronger channels.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eDistributable power with headroom: 400 watts into 8 ohms per channel in four-channel operation, 2× 800 watts bridged, 1× 800 watts plus 2× 400 watts mixed – into 4 ohms double that in each case. The frequency response spans 2 hertz to 70 kilohertz, total harmonic distortion stays below 0.01 percent, and the noise ratio is above 110 decibels. An amplifier you notice by the music, not by the background noise.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-4004 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone needing four robust channels from one unit: home cinema, multiroom, active concepts, bi-amping. Plainly put: as the driver for a single stereo pair it's overkill – the AMP-150 or the PWR-222 monos are enough there. And anyone wanting to feed six channels should go straight for the DPA-2506.\u003c\/p\u003e\u003ch3\u003eHow does the DPA-4004 differ from the DPA-2506?\u003c\/h3\u003e\u003cp\u003eIn the allocation: four channels at 400 watts into 8 ohms versus six channels at 250 watts. Chassis, dimensions and weight are the same; the decision comes down to the number of zones and the power needed per speaker.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003ePowerful, flexible and pleasantly unassuming – and in gloss white one of the few amplifiers that doesn't look out of place in a bright living room. At HD Zürisee in Wädenswil we plan the channel allocation for your rooms, check the right preamp, and take care of the installation.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e four-channel amplifier, Class D, freely configurable (4, 3 or 2 channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 4× 400 W · 2× 800 W (bridged) · 1× 800 W + 2× 400 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 4× 800 W · 2× 1600 W (bridged) · 1× 1600 W + 2× 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4–16 Ω individually, 8–16 Ω bridged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) · 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 pairs XLR balanced (Neutrik, gold-plated) · 2 pairs RCA unbalanced (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 4 pairs gold-plated safety banana terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby · 75 W idle · 2000 W maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic, gloss white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e power amplifier, power cable, mini-jack cable for the trigger, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many speakers can I run on the DPA-4004?\u003c\/h3\u003e\u003cp\u003eFour channels, so two complete stereo pairs in two zones. Anyone needing more power instead of more channels bridges: the DPA-4004 then delivers 2× 800 watts into 8 ohms, or mixed 1× 800 watts plus 2× 400 watts. We settle on the configuration together before installation.\u003c\/p\u003e\u003ch3\u003eDoes the DPA-4004 work without a preamplifier?\u003c\/h3\u003e\u003cp\u003eNo. It is a pure power amplifier with no volume control and no source selection; a preamplifier or an AV preamp must go ahead of it. The Gato PRD-3S is the obvious choice, but any preamp with an XLR or RCA output works just as well, including multiroom systems with pre-out.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the DPA-4004 and the DPA-2506?\u003c\/h3\u003e\u003cp\u003eThe allocation of power. Four channels at 400 watts into 8 ohms each for the DPA-4004, six channels at 250 watts each for the DPA-2506 – with identical chassis, the same dimensions and 13 kilograms of weight. What matters is how many zones or speakers you actually feed.\u003c\/p\u003e\u003ch3\u003eCan I connect the DPA-4004 balanced?\u003c\/h3\u003e\u003cp\u003eYes. Every channel has a balanced XLR input from Neutrik and an unbalanced RCA input, with an input impedance of 40 kilohms balanced and 20 kilohms unbalanced. Balanced connections pay off especially with long cable runs in multiroom installations.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-4004 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we've been planning systems for decades instead of just shipping boxes. We work out with you which channels go where, which preamp fits, and how the cable runs go. Our technician then takes care of installation and commissioning. Get in touch by phone, WhatsApp or email.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAhead of the DPA-4004 belongs a preamp – our selection is under \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e. Comparable units can be found under \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e, matching \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e, the components for \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e and the necessary \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508157776,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-4004-mehrkanal-endverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785896839"},{"product_id":"gatoaudiodpa4004wn","title":"Gato Audio DPA-4004 Multi-Channel Power Amplifier, Gloss Walnut","description":"\u003cp\u003eThe Gato Audio DPA-4004 is a four-channel power amplifier in Class-D technology, whose channels can run individually or be bridged in pairs.\u003c\/p\u003e\u003cp\u003eGato Audio builds it in Copenhagen: a non-magnetic chassis, four full-fledged power amplifiers with their own switch-mode power supplies, gold-plated XLR and RCA inputs for every channel, and four pairs of speaker terminals. A 12-volt trigger switches the unit on and off together with the system. This version comes with genuine walnut veneer under gloss lacquer – grain included, each unit slightly different.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio DPA-4004?\u003c\/h2\u003e\u003cp\u003eBecause it bundles four power amplifiers and leaves the distribution to you: two zones each with a stereo pair, two bridged channels with noticeably more punch, or the mixed form. The six-channel DPA-2506 uses the same body – the DPA-4004 relies on fewer channels with more power. And wood on a power amplifier is a rare sight. Too rare.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003ePower as needed: four channels at 400 watts into 8 ohms each, bridged 2× 800 watts, mixed 1× 800 watts plus 2× 400 watts – into 4 ohms these figures double. Add over 110 decibels of signal-to-noise ratio, under 0.01 percent distortion, and a frequency response that stays clean well below and above what's audible.\u003c\/p\u003e\u003ch3\u003eWho is the DPA-4004 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor home cinema and multiroom systems as well as bi-amping setups needing four channels – especially where the unit stands visibly in the living space. Plainly put: for a pure stereo chain that's too much amplifier; that's what the AMP-150 or the PWR-222 monos are for. Beyond four channels, the DPA-2506 takes over.\u003c\/p\u003e\u003ch3\u003eHow does the DPA-4004 differ from the DPA-2506?\u003c\/h3\u003e\u003cp\u003eFour channels at 400 watts into 8 ohms versus six channels at 250 watts – with the same chassis, the same dimensions and the same weight. So the question isn't which is bigger, but how many speakers you want to feed.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA flexible four-channel amplifier in a chassis variant that doesn't look like a utility room in the living room. At HD Zürisee in Wädenswil we settle with you which channels take on which speakers, choose the matching preamp, and set everything up on site.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e four-channel amplifier, Class D, freely configurable (4, 3 or 2 channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 8 Ω:\u003c\/strong\u003e 4× 400 W · 2× 800 W (bridged) · 1× 800 W + 2× 400 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower at 4 Ω:\u003c\/strong\u003e 4× 800 W · 2× 1600 W (bridged) · 1× 1600 W + 2× 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4–16 Ω individually, 8–16 Ω bridged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.5 dB), 2 Hz – 70 kHz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.01 % at rated power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) · 40 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 pairs XLR balanced (Neutrik, gold-plated) · 2 pairs RCA unbalanced (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker connections:\u003c\/strong\u003e 4 pairs gold-plated safety banana terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 V AC, 50\/60 Hz, max. 2000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e \u0026lt; 1 W standby · 75 W idle · 2000 W maximum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e non-magnetic, walnut veneer gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 13 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e power amplifier, power cable, mini-jack cable for the trigger, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many zones does the DPA-4004 feed?\u003c\/h3\u003e\u003cp\u003eUp to two stereo zones, each with two channels at 400 watts into 8 ohms. If you need power on fewer channels instead, bridge them: 2× 800 watts, or mixed 1× 800 watts plus 2× 400 watts. The allocation gets settled during installation.\u003c\/p\u003e\u003ch3\u003eDo I need a preamp for the DPA-4004?\u003c\/h3\u003e\u003cp\u003eYes. With no volume control and no source selection, the DPA-4004 depends on a preamplifier – a classic one, an AV preamp, or a multiroom hub with preamp outputs. The Gato PRD-3S is the in-house partner; technically any preamp with an XLR or RCA output fits.\u003c\/p\u003e\u003ch3\u003eIs the DPA-4004 or the DPA-2506 the right choice?\u003c\/h3\u003e\u003cp\u003eThat comes down to channel count. The DPA-4004 offers four channels at 400 watts into 8 ohms each, the DPA-2506 six channels at 250 watts each, with the same chassis and the same weight. More rooms favour the six-channel version, more power per channel favours the DPA-4004.\u003c\/p\u003e\u003ch3\u003eIs the walnut chassis genuine veneer?\u003c\/h3\u003e\u003cp\u003eYes, Gato Audio uses genuine walnut veneer and lacquers it in gloss. That's why each unit looks slightly different – grain is nature, not a printed image. Besides walnut, gloss black and gloss white are available, as well as individual custom colours on request.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio DPA-4004 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause four channels only make sense once someone allocates them properly. We plan the zones, choose the preamp to match your speakers, and take care of cabling and commissioning. Tell us about your room – by phone, WhatsApp or email to Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eOur \u003ca href=\"\/en\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e make a good partner ahead of it. Further \u003ca href=\"\/en\/collections\/endstufen\"\u003ePower amplifiers\u003c\/a\u003e for comparison, \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e for the zones, \u003ca href=\"\/en\/collections\/heimkino\"\u003eHome cinema\u003c\/a\u003e components for multi-channel operation, and \u003ca href=\"\/en\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e for the signal paths are also in our shop.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508190544,"sku":null,"price":4495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-dpa-4004-mehrkanal-endverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785896859"},{"product_id":"gatoaudioprd3snpmbl","title":"Gato Audio PRD-3S NPM Streaming Preamplifier, Gloss Black","description":"\u003cp\u003eThe Gato Audio PRD-3S NPM is a streaming preamplifier from the Danish manufacturer Gato Audio – with a built-in D\/A converter and network player (NPM module). Supplied as a single unit.\u003c\/p\u003e\u003cp\u003eIt's the anchor point of Gato's reference pre-\/power-amp system: a pure preamp with DAC and streaming that gathers your sources, sets clean levels, and passes them on to a separate power amplifier – such as the PWR-222 mono power amp.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRD-3S NPM?\u003c\/h2\u003e\u003cp\u003eBecause separate pre- and power amps leave every task to a specialised unit. The PRD-3S bundles analogue and digital sources, a D\/A converter and a network player in a demagnetised aluminium chassis – keeping the sensitive preamp signal away from the heat and power demands of a power amplifier. Balanced (XLR) as well as unbalanced (RCA) inputs and outputs with gold-plated Neutrik connectors allow any configuration; a 12V trigger coordinates switching on and off with the power amp.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA calm, neutral preamp with very low distortion (\u0026lt; 0.001 % at the pre-out) and built-in streaming – the control centre for a high-resolution pre-\/power-amp system that you later scale freely via the power amplifier.\u003c\/p\u003e\u003ch3\u003eWho is the PRD-3S NPM suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003ePlainly put: the PRD-3S NPM is for anyone who deliberately opts for separate pre-\/power amps and wants streaming plus a DAC built right into the preamp. Anyone looking for a compact all-in-one solution is better and more affordably served by the streaming integrated amplifier DIA-250S or DIA-400S NPM – the PRD-3S absolutely needs a separate power amp and delivers no speaker power itself.\u003c\/p\u003e\u003ch3\u003eWhich power amp suits the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eThe ideal partner is the Gato PWR-222 mono power amp: it plays in the same sonic league and is cleanly switched on and off via the PRD-3S's 12V trigger. In principle, any power amp with an RCA or XLR input fits.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe streaming control centre for a Danish pre-\/power-amp system – neutral, quiet and flexibly expandable. At HD Zürisee in Wädenswil we plan the combination of PRD-3S, power amp and speakers, and set up network and streaming together with you.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRD-3S NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming preamplifier with DAC \u0026amp; network player (NPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e NPM module, app-controlled; Roon Ready, Tidal\/Qobuz\/Deezer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 100 kHz (−0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.001 % (pre-out)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 13 V balanced \/ 6.5 V unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik), 2× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2× XLR balanced (Neutrik), 1× RCA stereo, 1× trigger 12V (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e USB-B, optical (Toslink), coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome cinema:\u003c\/strong\u003e configurable home cinema input (bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 14 W, max. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e developed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I absolutely need a power amp with the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eYes. The PRD-3S is a pure preamp with no speaker power. It passes the signal on to a power amplifier – ideally the Gato PWR-222. Anyone wanting power amp and preamp in one unit should get the DIA-250S or DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRD-3S NPM available in?\u003c\/h3\u003e\u003cp\u003eIn black, white and walnut – each in gloss – as well as, on request, in an individual gloss custom colour finish.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRD-3S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a pre-\/power-amp system needs planning – the right power amp, speakers, network. We put the chain together with you, set up streaming and Roon, and deliver and install with our own technician in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching power amp Gato PWR-222, the right \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntable\u003c\/a\u003e as an analogue source.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508223312,"sku":null,"price":2895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-prd-3s-npm-streaming-vorverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785898959"},{"product_id":"gatoaudioprd3snpmcu","title":"Gato Audio PRD-3S NPM Streaming Preamplifier, Custom Colour Gloss","description":"\u003cp\u003eThe Gato Audio PRD-3S NPM is a streaming preamplifier from the Danish manufacturer Gato Audio – with a built-in D\/A converter and network player (NPM module). Supplied as a single unit.\u003c\/p\u003e\u003cp\u003eIt's the anchor point of Gato's reference pre-\/power-amp system: a pure preamp with DAC and streaming that gathers your sources, sets clean levels, and passes them on to a separate power amplifier – such as the PWR-222 mono power amp.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRD-3S NPM?\u003c\/h2\u003e\u003cp\u003eBecause separate pre- and power amps leave every task to a specialised unit. The PRD-3S bundles analogue and digital sources, a D\/A converter and a network player in a demagnetised aluminium chassis – keeping the sensitive preamp signal away from the heat and power demands of a power amplifier. Balanced (XLR) as well as unbalanced (RCA) inputs and outputs with gold-plated Neutrik connectors allow any configuration; a 12V trigger coordinates switching on and off with the power amp.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA calm, neutral preamp with very low distortion (\u0026lt; 0.001 % at the pre-out) and built-in streaming – the control centre for a high-resolution pre-\/power-amp system that you later scale freely via the power amplifier.\u003c\/p\u003e\u003ch3\u003eWho is the PRD-3S NPM suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003ePlainly put: the PRD-3S NPM is for anyone who deliberately opts for separate pre-\/power amps and wants streaming plus a DAC built right into the preamp. Anyone looking for a compact all-in-one solution is better and more affordably served by the streaming integrated amplifier DIA-250S or DIA-400S NPM – the PRD-3S absolutely needs a separate power amp and delivers no speaker power itself.\u003c\/p\u003e\u003ch3\u003eWhich power amp suits the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eThe ideal partner is the Gato PWR-222 mono power amp: it plays in the same sonic league and is cleanly switched on and off via the PRD-3S's 12V trigger. In principle, any power amp with an RCA or XLR input fits.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe streaming control centre for a Danish pre-\/power-amp system – neutral, quiet and flexibly expandable. At HD Zürisee in Wädenswil we plan the combination of PRD-3S, power amp and speakers, and set up network and streaming together with you.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRD-3S NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming preamplifier with DAC \u0026amp; network player (NPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e NPM module, app-controlled; Roon Ready, Tidal\/Qobuz\/Deezer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 100 kHz (−0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.001 % (pre-out)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 13 V balanced \/ 6.5 V unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik), 2× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2× XLR balanced (Neutrik), 1× RCA stereo, 1× trigger 12V (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e USB-B, optical (Toslink), coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome cinema:\u003c\/strong\u003e configurable home cinema input (bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 14 W, max. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss custom colour (individual lacquer finish)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e developed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I absolutely need a power amp with the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eYes. The PRD-3S is a pure preamp with no speaker power. It passes the signal on to a power amplifier – ideally the Gato PWR-222. Anyone wanting power amp and preamp in one unit should get the DIA-250S or DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRD-3S NPM available in?\u003c\/h3\u003e\u003cp\u003eIn black, white and walnut – each in gloss – as well as, on request, in an individual gloss custom colour finish.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRD-3S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a pre-\/power-amp system needs planning – the right power amp, speakers, network. We put the chain together with you, set up streaming and Roon, and deliver and install with our own technician in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching power amp Gato PWR-222, the right \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntable\u003c\/a\u003e as an analogue source.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508256080,"sku":null,"price":3295.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-prd-3s-npm-streaming-vorverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785898959"},{"product_id":"gatoaudioprd3snpmwh","title":"Gato Audio PRD-3S NPM Streaming Preamplifier, Gloss White","description":"\u003cp\u003eThe Gato Audio PRD-3S NPM is a streaming preamplifier from the Danish manufacturer Gato Audio – with a built-in D\/A converter and network player (NPM module). Supplied as a single unit.\u003c\/p\u003e\u003cp\u003eIt's the anchor point of Gato's reference pre-\/power-amp system: a pure preamp with DAC and streaming that gathers your sources, sets clean levels, and passes them on to a separate power amplifier – such as the PWR-222 mono power amp.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRD-3S NPM?\u003c\/h2\u003e\u003cp\u003eBecause separate pre- and power amps leave every task to a specialised unit. The PRD-3S bundles analogue and digital sources, a D\/A converter and a network player in a demagnetised aluminium chassis – keeping the sensitive preamp signal away from the heat and power demands of a power amplifier. Balanced (XLR) as well as unbalanced (RCA) inputs and outputs with gold-plated Neutrik connectors allow any configuration; a 12V trigger coordinates switching on and off with the power amp.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA calm, neutral preamp with very low distortion (\u0026lt; 0.001 % at the pre-out) and built-in streaming – the control centre for a high-resolution pre-\/power-amp system that you later scale freely via the power amplifier.\u003c\/p\u003e\u003ch3\u003eWho is the PRD-3S NPM suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003ePlainly put: the PRD-3S NPM is for anyone who deliberately opts for separate pre-\/power amps and wants streaming plus a DAC built right into the preamp. Anyone looking for a compact all-in-one solution is better and more affordably served by the streaming integrated amplifier DIA-250S or DIA-400S NPM – the PRD-3S absolutely needs a separate power amp and delivers no speaker power itself.\u003c\/p\u003e\u003ch3\u003eWhich power amp suits the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eThe ideal partner is the Gato PWR-222 mono power amp: it plays in the same sonic league and is cleanly switched on and off via the PRD-3S's 12V trigger. In principle, any power amp with an RCA or XLR input fits.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe streaming control centre for a Danish pre-\/power-amp system – neutral, quiet and flexibly expandable. At HD Zürisee in Wädenswil we plan the combination of PRD-3S, power amp and speakers, and set up network and streaming together with you.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRD-3S NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming preamplifier with DAC \u0026amp; network player (NPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e NPM module, app-controlled; Roon Ready, Tidal\/Qobuz\/Deezer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 100 kHz (−0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.001 % (pre-out)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 13 V balanced \/ 6.5 V unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik), 2× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2× XLR balanced (Neutrik), 1× RCA stereo, 1× trigger 12V (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e USB-B, optical (Toslink), coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome cinema:\u003c\/strong\u003e configurable home cinema input (bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 14 W, max. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e developed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I absolutely need a power amp with the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eYes. The PRD-3S is a pure preamp with no speaker power. It passes the signal on to a power amplifier – ideally the Gato PWR-222. Anyone wanting power amp and preamp in one unit should get the DIA-250S or DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRD-3S NPM available in?\u003c\/h3\u003e\u003cp\u003eIn black, white and walnut – each in gloss – as well as, on request, in an individual gloss custom colour finish.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRD-3S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a pre-\/power-amp system needs planning – the right power amp, speakers, network. We put the chain together with you, set up streaming and Roon, and deliver and install with our own technician in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching power amp Gato PWR-222, the right \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntable\u003c\/a\u003e as an analogue source.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508288848,"sku":null,"price":2895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-prd-3s-npm-streaming-vorverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785898959"},{"product_id":"gatoaudioprd3snpmwn","title":"Gato Audio PRD-3S NPM Streaming Preamplifier, Gloss Walnut","description":"\u003cp\u003eThe Gato Audio PRD-3S NPM is a streaming preamplifier from the Danish manufacturer Gato Audio – with a built-in D\/A converter and network player (NPM module). Supplied as a single unit.\u003c\/p\u003e\u003cp\u003eIt's the anchor point of Gato's reference pre-\/power-amp system: a pure preamp with DAC and streaming that gathers your sources, sets clean levels, and passes them on to a separate power amplifier – such as the PWR-222 mono power amp.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRD-3S NPM?\u003c\/h2\u003e\u003cp\u003eBecause separate pre- and power amps leave every task to a specialised unit. The PRD-3S bundles analogue and digital sources, a D\/A converter and a network player in a demagnetised aluminium chassis – keeping the sensitive preamp signal away from the heat and power demands of a power amplifier. Balanced (XLR) as well as unbalanced (RCA) inputs and outputs with gold-plated Neutrik connectors allow any configuration; a 12V trigger coordinates switching on and off with the power amp.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eA calm, neutral preamp with very low distortion (\u0026lt; 0.001 % at the pre-out) and built-in streaming – the control centre for a high-resolution pre-\/power-amp system that you later scale freely via the power amplifier.\u003c\/p\u003e\u003ch3\u003eWho is the PRD-3S NPM suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003ePlainly put: the PRD-3S NPM is for anyone who deliberately opts for separate pre-\/power amps and wants streaming plus a DAC built right into the preamp. Anyone looking for a compact all-in-one solution is better and more affordably served by the streaming integrated amplifier DIA-250S or DIA-400S NPM – the PRD-3S absolutely needs a separate power amp and delivers no speaker power itself.\u003c\/p\u003e\u003ch3\u003eWhich power amp suits the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eThe ideal partner is the Gato PWR-222 mono power amp: it plays in the same sonic league and is cleanly switched on and off via the PRD-3S's 12V trigger. In principle, any power amp with an RCA or XLR input fits.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe streaming control centre for a Danish pre-\/power-amp system – neutral, quiet and flexibly expandable. At HD Zürisee in Wädenswil we plan the combination of PRD-3S, power amp and speakers, and set up network and streaming together with you.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRD-3S NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e streaming preamplifier with DAC \u0026amp; network player (NPM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork player:\u003c\/strong\u003e NPM module, app-controlled; Roon Ready, Tidal\/Qobuz\/Deezer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Ethernet or Wi-Fi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 100 kHz (−0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.001 % (pre-out)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 110 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 13 V balanced \/ 6.5 V unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA) \/ 40 kΩ (balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik), 2× RCA stereo – gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2× XLR balanced (Neutrik), 1× RCA stereo, 1× trigger 12V (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e USB-B, optical (Toslink), coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth:\u003c\/strong\u003e aptX HD (Bluetooth 4.2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome cinema:\u003c\/strong\u003e configurable home cinema input (bypass)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 14 W, max. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss walnut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e developed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I absolutely need a power amp with the PRD-3S NPM?\u003c\/h3\u003e\u003cp\u003eYes. The PRD-3S is a pure preamp with no speaker power. It passes the signal on to a power amplifier – ideally the Gato PWR-222. Anyone wanting power amp and preamp in one unit should get the DIA-250S or DIA-400S NPM.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRD-3S NPM available in?\u003c\/h3\u003e\u003cp\u003eIn black, white and walnut – each in gloss – as well as, on request, in an individual gloss custom colour finish.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRD-3S NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a pre-\/power-amp system needs planning – the right power amp, speakers, network. We put the chain together with you, set up streaming and Roon, and deliver and install with our own technician in Wädenswil.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching power amp Gato PWR-222, the right \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e and a \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntable\u003c\/a\u003e as an analogue source.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508321616,"sku":null,"price":2895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-prd-3s-npm-streaming-vorverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785898982"},{"product_id":"gatoaudiopwr222bl","title":"Gato Audio PWR-222 Mono Power Amplifier, Gloss Black (Single Unit)","description":"\u003cp\u003eThe Gato Audio PWR-222 is an analogue mono power amplifier from Copenhagen – a power amplifier that drives exactly one channel, and gets the full circuit, the full power supply and the whole chassis for it.\u003c\/p\u003e\u003cp\u003eBehind the curved Danish front sits an uncompromisingly built power amplifier with 250 watts into 8 ohms and 450 watts into 4 ohms, a balanced XLR input from Neutrik, a gold-plated RCA input and speaker terminals from WBT. This version comes in deep gloss black. Supplied as a single mono block – for classic stereo you need two of them.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PWR-222?\u003c\/h2\u003e\u003cp\u003eBecause a true mono power amplifier gives each channel what stereo power amps have to share: its own power supply, its own amplification stage, no crosstalk from the neighbouring channel. The PWR-222 is Gato's answer for anyone who wants to hear their preamp – above all the in-house PRD-3S – on speakers that demand a bit more current. Preamp and power amp share not only the looks but also the 12-volt trigger: preamp on, power amps on.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl. The PWR-222 cleanly doubles its output from 8 to 4 ohms – a sign of a stable power supply and a low internal resistance that keeps difficult speakers on a short leash instead of going soft under complex loads. Add a noise ratio beyond 115 dB and distortion below 0.003 percent: the amplifier itself stays acoustically out of the way and lets through whatever the preamp dictates.\u003c\/p\u003e\u003ch3\u003eWho is the PWR-222 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone building a full-fledged pre-\/power-amp chain and wanting to give their speakers genuine mono power – ideal as a pair with the Gato PRD-3S. Plainly put: anyone looking for a compact integrated amp or a one-chassis solution is better served by the AMP-150 or DIA-250S. The PWR-222 is deliberately just a power amplifier – no preamp, no source, no volume control – and needs a front-end unit to drive it.\u003c\/p\u003e\u003ch3\u003eDo I need one or two PWR-222?\u003c\/h3\u003e\u003cp\u003eTwo, if you listen in stereo – one mono block per channel. That's exactly the point of the design: left and right channel work in completely separate units, each with its own power supply.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PWR-222 is the honest, analogue mono power amp for an upper-tier Gato chain: plenty of current, a clean power supply, refined connections, Danish design. Anyone with a PRD-3S preamp and speakers that want power finds the matching drive here. At HD Zürisee in Wädenswil you can listen to the combination at leisure on the speakers of your choice – and we'll tell you honestly whether a pair of PWR-222 makes sense for you or whether an integrated amplifier is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PWR-222\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e analogue mono power amplifier (1 channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 250 W RMS into 8 Ω · 450 W RMS into 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20,000 Hz (−0.1 dB) · 2 Hz – 100,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.003 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (S\/N):\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 100 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik) · 1× RCA (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker output:\u003c\/strong\u003e WBT NextGen binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (on\/off via the preamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W · idle 55 W · max. 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 40 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e one mono block (single unit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PWR-222 match the PRD-3S preamp?\u003c\/h3\u003e\u003cp\u003eYes, that's the intended combination: the PRD-3S as a streaming preamp with DAC, a pair of PWR-222 as mono power amplifiers – connected via balanced XLR cables and the shared 12-volt trigger, which automatically switches the power amps on and off with the preamp.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the PWR-222 drive?\u003c\/h3\u003e\u003cp\u003eWith 250 watts into 8 and 450 watts into 4 ohms, plus a recommended load of 4 to 16 ohms, the PWR-222 handles the vast majority of floorstanding and bookshelf speakers – including ones considered current-hungry. Which speakers specifically suit your room and your listening level is best clarified at a listening session.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PWR-222 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a mono power amplifier only makes sense as part of a pairing – and that's exactly the pairing we plan with you. At HD Zürisee in Wädenswil you listen to the PWR-222 and PRD-3S on your own speakers, get the matching cabling to go with it, and an honest assessment of whether the mono solution really gives you something over an integrated amplifier.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAs a preamp, the Gato Audio PRD-3S plays in the same sonic league and switches the PWR-222 on right along with it via the shared 12V trigger. Add your \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e of choice – and for true stereo, two PWR-222 as a mono power amp pair.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508354384,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pwr-222-mono-endverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785899288"},{"product_id":"gatoaudiopwr222cu","title":"Gato Audio PWR-222 Mono Power Amplifier, Custom Colour Gloss (Single Unit)","description":"\u003cp\u003eThe Gato Audio PWR-222 is an analogue mono power amplifier from Copenhagen – a power amplifier that drives exactly one channel, and gets the full circuit, the full power supply and the whole chassis for it.\u003c\/p\u003e\u003cp\u003eBehind the curved Danish front sits an uncompromisingly built power amplifier with 250 watts into 8 ohms and 450 watts into 4 ohms, a balanced XLR input from Neutrik, a gold-plated RCA input and speaker terminals from WBT. On request, Gato paints this version in your individual custom colour of choice – always in gloss. Supplied as a single mono block – for classic stereo you need two of them.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PWR-222?\u003c\/h2\u003e\u003cp\u003eBecause a true mono power amplifier gives each channel what stereo power amps have to share: its own power supply, its own amplification stage, no crosstalk from the neighbouring channel. The PWR-222 is Gato's answer for anyone who wants to hear their preamp – above all the in-house PRD-3S – on speakers that demand a bit more current. Preamp and power amp share not only the looks but also the 12-volt trigger: preamp on, power amps on.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl. The PWR-222 cleanly doubles its output from 8 to 4 ohms – a sign of a stable power supply and a low internal resistance that keeps difficult speakers on a short leash instead of going soft under complex loads. Add a noise ratio beyond 115 dB and distortion below 0.003 percent: the amplifier itself stays acoustically out of the way and lets through whatever the preamp dictates.\u003c\/p\u003e\u003ch3\u003eWho is the PWR-222 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone building a full-fledged pre-\/power-amp chain and wanting to give their speakers genuine mono power – ideal as a pair with the Gato PRD-3S. Plainly put: anyone looking for a compact integrated amp or a one-chassis solution is better served by the AMP-150 or DIA-250S. The PWR-222 is deliberately just a power amplifier – no preamp, no source, no volume control – and needs a front-end unit to drive it.\u003c\/p\u003e\u003ch3\u003eDo I need one or two PWR-222?\u003c\/h3\u003e\u003cp\u003eTwo, if you listen in stereo – one mono block per channel. That's exactly the point of the design: left and right channel work in completely separate units, each with its own power supply.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PWR-222 is the honest, analogue mono power amp for an upper-tier Gato chain: plenty of current, a clean power supply, refined connections, Danish design. Anyone with a PRD-3S preamp and speakers that want power finds the matching drive here. At HD Zürisee in Wädenswil you can listen to the combination at leisure on the speakers of your choice – and we'll tell you honestly whether a pair of PWR-222 makes sense for you or whether an integrated amplifier is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PWR-222\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e analogue mono power amplifier (1 channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 250 W RMS into 8 Ω · 450 W RMS into 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20,000 Hz (−0.1 dB) · 2 Hz – 100,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.003 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (S\/N):\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 100 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik) · 1× RCA (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker output:\u003c\/strong\u003e WBT NextGen binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (on\/off via the preamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W · idle 55 W · max. 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 40 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e individual custom colour, gloss lacquered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e one mono block (single unit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PWR-222 match the PRD-3S preamp?\u003c\/h3\u003e\u003cp\u003eYes, that's the intended combination: the PRD-3S as a streaming preamp with DAC, a pair of PWR-222 as mono power amplifiers – connected via balanced XLR cables and the shared 12-volt trigger, which automatically switches the power amps on and off with the preamp.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the PWR-222 drive?\u003c\/h3\u003e\u003cp\u003eWith 250 watts into 8 and 450 watts into 4 ohms, plus a recommended load of 4 to 16 ohms, the PWR-222 handles the vast majority of floorstanding and bookshelf speakers – including ones considered current-hungry. Which speakers specifically suit your room and your listening level is best clarified at a listening session.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PWR-222 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a mono power amplifier only makes sense as part of a pairing – and that's exactly the pairing we plan with you. At HD Zürisee in Wädenswil you listen to the PWR-222 and PRD-3S on your own speakers, get the matching cabling to go with it, and an honest assessment of whether the mono solution really gives you something over an integrated amplifier.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAs a preamp, the Gato Audio PRD-3S plays in the same sonic league and switches the PWR-222 on right along with it via the shared 12V trigger. Add your \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e of choice – and for true stereo, two PWR-222 as a mono power amp pair.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508387152,"sku":null,"price":5395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pwr-222-mono-endverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785899310"},{"product_id":"gatoaudiopwr222wh","title":"Gato Audio PWR-222 Mono Power Amplifier, Gloss White (Single Unit)","description":"\u003cp\u003eThe Gato Audio PWR-222 is an analogue mono power amplifier from Copenhagen – a power amplifier that drives exactly one channel, and gets the full circuit, the full power supply and the whole chassis for it.\u003c\/p\u003e\u003cp\u003eBehind the curved Danish front sits an uncompromisingly built power amplifier with 250 watts into 8 ohms and 450 watts into 4 ohms, a balanced XLR input from Neutrik, a gold-plated RCA input and speaker terminals from WBT. This version comes in pure gloss white. Supplied as a single mono block – for classic stereo you need two of them.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PWR-222?\u003c\/h2\u003e\u003cp\u003eBecause a true mono power amplifier gives each channel what stereo power amps have to share: its own power supply, its own amplification stage, no crosstalk from the neighbouring channel. The PWR-222 is Gato's answer for anyone who wants to hear their preamp – above all the in-house PRD-3S – on speakers that demand a bit more current. Preamp and power amp share not only the looks but also the 12-volt trigger: preamp on, power amps on.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl. The PWR-222 cleanly doubles its output from 8 to 4 ohms – a sign of a stable power supply and a low internal resistance that keeps difficult speakers on a short leash instead of going soft under complex loads. Add a noise ratio beyond 115 dB and distortion below 0.003 percent: the amplifier itself stays acoustically out of the way and lets through whatever the preamp dictates.\u003c\/p\u003e\u003ch3\u003eWho is the PWR-222 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone building a full-fledged pre-\/power-amp chain and wanting to give their speakers genuine mono power – ideal as a pair with the Gato PRD-3S. Plainly put: anyone looking for a compact integrated amp or a one-chassis solution is better served by the AMP-150 or DIA-250S. The PWR-222 is deliberately just a power amplifier – no preamp, no source, no volume control – and needs a front-end unit to drive it.\u003c\/p\u003e\u003ch3\u003eDo I need one or two PWR-222?\u003c\/h3\u003e\u003cp\u003eTwo, if you listen in stereo – one mono block per channel. That's exactly the point of the design: left and right channel work in completely separate units, each with its own power supply.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PWR-222 is the honest, analogue mono power amp for an upper-tier Gato chain: plenty of current, a clean power supply, refined connections, Danish design. Anyone with a PRD-3S preamp and speakers that want power finds the matching drive here. At HD Zürisee in Wädenswil you can listen to the combination at leisure on the speakers of your choice – and we'll tell you honestly whether a pair of PWR-222 makes sense for you or whether an integrated amplifier is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PWR-222\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e analogue mono power amplifier (1 channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 250 W RMS into 8 Ω · 450 W RMS into 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20,000 Hz (−0.1 dB) · 2 Hz – 100,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.003 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (S\/N):\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 100 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik) · 1× RCA (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker output:\u003c\/strong\u003e WBT NextGen binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (on\/off via the preamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W · idle 55 W · max. 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 40 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e one mono block (single unit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PWR-222 match the PRD-3S preamp?\u003c\/h3\u003e\u003cp\u003eYes, that's the intended combination: the PRD-3S as a streaming preamp with DAC, a pair of PWR-222 as mono power amplifiers – connected via balanced XLR cables and the shared 12-volt trigger, which automatically switches the power amps on and off with the preamp.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the PWR-222 drive?\u003c\/h3\u003e\u003cp\u003eWith 250 watts into 8 and 450 watts into 4 ohms, plus a recommended load of 4 to 16 ohms, the PWR-222 handles the vast majority of floorstanding and bookshelf speakers – including ones considered current-hungry. Which speakers specifically suit your room and your listening level is best clarified at a listening session.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PWR-222 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a mono power amplifier only makes sense as part of a pairing – and that's exactly the pairing we plan with you. At HD Zürisee in Wädenswil you listen to the PWR-222 and PRD-3S on your own speakers, get the matching cabling to go with it, and an honest assessment of whether the mono solution really gives you something over an integrated amplifier.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAs a preamp, the Gato Audio PRD-3S plays in the same sonic league and switches the PWR-222 on right along with it via the shared 12V trigger. Add your \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e of choice – and for true stereo, two PWR-222 as a mono power amp pair.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508419920,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pwr-222-mono-endverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785899333"},{"product_id":"gatoaudiopwr222wn","title":"Gato Audio PWR-222 Mono Power Amplifier, Gloss Walnut (Single Unit)","description":"\u003cp\u003eThe Gato Audio PWR-222 is an analogue mono power amplifier from Copenhagen – a power amplifier that drives exactly one channel, and gets the full circuit, the full power supply and the whole chassis for it.\u003c\/p\u003e\u003cp\u003eBehind the curved Danish front sits an uncompromisingly built power amplifier with 250 watts into 8 ohms and 450 watts into 4 ohms, a balanced XLR input from Neutrik, a gold-plated RCA input and speaker terminals from WBT. This version comes in genuine walnut veneer with gloss lacquer. Supplied as a single mono block – for classic stereo you need two of them.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PWR-222?\u003c\/h2\u003e\u003cp\u003eBecause a true mono power amplifier gives each channel what stereo power amps have to share: its own power supply, its own amplification stage, no crosstalk from the neighbouring channel. The PWR-222 is Gato's answer for anyone who wants to hear their preamp – above all the in-house PRD-3S – on speakers that demand a bit more current. Preamp and power amp share not only the looks but also the 12-volt trigger: preamp on, power amps on.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl. The PWR-222 cleanly doubles its output from 8 to 4 ohms – a sign of a stable power supply and a low internal resistance that keeps difficult speakers on a short leash instead of going soft under complex loads. Add a noise ratio beyond 115 dB and distortion below 0.003 percent: the amplifier itself stays acoustically out of the way and lets through whatever the preamp dictates.\u003c\/p\u003e\u003ch3\u003eWho is the PWR-222 suited for – and who is it not?\u003c\/h3\u003e\u003cp\u003eFor anyone building a full-fledged pre-\/power-amp chain and wanting to give their speakers genuine mono power – ideal as a pair with the Gato PRD-3S. Plainly put: anyone looking for a compact integrated amp or a one-chassis solution is better served by the AMP-150 or DIA-250S. The PWR-222 is deliberately just a power amplifier – no preamp, no source, no volume control – and needs a front-end unit to drive it.\u003c\/p\u003e\u003ch3\u003eDo I need one or two PWR-222?\u003c\/h3\u003e\u003cp\u003eTwo, if you listen in stereo – one mono block per channel. That's exactly the point of the design: left and right channel work in completely separate units, each with its own power supply.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe PWR-222 is the honest, analogue mono power amp for an upper-tier Gato chain: plenty of current, a clean power supply, refined connections, Danish design. Anyone with a PRD-3S preamp and speakers that want power finds the matching drive here. At HD Zürisee in Wädenswil you can listen to the combination at leisure on the speakers of your choice – and we'll tell you honestly whether a pair of PWR-222 makes sense for you or whether an integrated amplifier is enough.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PWR-222\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e analogue mono power amplifier (1 channel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 250 W RMS into 8 Ω · 450 W RMS into 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20,000 Hz (−0.1 dB) · 2 Hz – 100,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD):\u003c\/strong\u003e \u0026lt; 0.003 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio (S\/N):\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 100 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 26 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended speaker impedance:\u003c\/strong\u003e 4 – 16 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× XLR balanced (Neutrik) · 1× RCA (gold-plated)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker output:\u003c\/strong\u003e WBT NextGen binding posts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12V standby trigger (on\/off via the preamp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W · idle 55 W · max. 800 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 40 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e genuine walnut veneer, gloss lacquered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Gato Audio, Copenhagen (Denmark)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e one mono block (single unit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PWR-222 match the PRD-3S preamp?\u003c\/h3\u003e\u003cp\u003eYes, that's the intended combination: the PRD-3S as a streaming preamp with DAC, a pair of PWR-222 as mono power amplifiers – connected via balanced XLR cables and the shared 12-volt trigger, which automatically switches the power amps on and off with the preamp.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the PWR-222 drive?\u003c\/h3\u003e\u003cp\u003eWith 250 watts into 8 and 450 watts into 4 ohms, plus a recommended load of 4 to 16 ohms, the PWR-222 handles the vast majority of floorstanding and bookshelf speakers – including ones considered current-hungry. Which speakers specifically suit your room and your listening level is best clarified at a listening session.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PWR-222 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a mono power amplifier only makes sense as part of a pairing – and that's exactly the pairing we plan with you. At HD Zürisee in Wädenswil you listen to the PWR-222 and PRD-3S on your own speakers, get the matching cabling to go with it, and an honest assessment of whether the mono solution really gives you something over an integrated amplifier.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eAs a preamp, the Gato Audio PRD-3S plays in the same sonic league and switches the PWR-222 on right along with it via the shared 12V trigger. Add your \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding speakers\u003c\/a\u003e of choice – and for true stereo, two PWR-222 as a mono power amp pair.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":52989508452688,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pwr-222-mono-endverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785899355"},{"product_id":"gatoaudioppa1bl","title":"Gato Audio PPA-1 Phono Preamplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio PPA-1 is a dedicated phono preamplifier from the Danish manufacturer Gato Audio for MM and MC cartridges.\u003c\/p\u003e\u003cp\u003eIt's Gato's first standalone phono stage – and it arrives with reference-level ambitions right away. A current-mode MC input, freely adjustable MM capacitance, two fully separate, storable inputs and a dedicated headphone amplifier all sit behind the understated high-gloss front. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PPA-1?\u003c\/h2\u003e\u003cp\u003eBecause here, every detail is aimed at the groove. The MC input works in current mode: it amplifies the cartridge's current rather than its voltage, automatically finding the best load for virtually any system – with no impedance guesswork and minimal noise. For MM systems, you set the capacitive load (100 to 790 pF) directly on the front panel or via remote control. Gain is 40 dB (MM) or 60 dB (MC), with an additional +15 dB in reserve for temperamental low-output MCs that don't play by the rules. Two fully configurable inputs remember all settings individually – ideal for two turntables or a deck with two tonearms. The circuit is a hybrid of discrete and IC stages with a newly developed, discrete push-pull FET output stage, built fully balanced. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA pitch-black background and a wealth of fine detail that gets lost with weaker phono stages. The current-mode MC input keeps noise down, while the balanced FET output stage keeps the soundstage wide and stable – instruments stand cleanly separated, and micro-dynamics and reverb tails are preserved. A switchable subsonic filter keeps footfall and record warp out of the bass without ever sounding like a filter.\u003c\/p\u003e\u003ch3\u003eWho is the PPA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PPA-1 is for anyone who takes vinyl seriously and wants a flexible, extremely quiet reference phono stage for MM and MC – ideally with two systems or tonearms and headphone ambitions. If you're running an entry-level turntable with a standard cartridge, you'll never unlock its potential: that's a Formula 1 gearbox on a shopping trolley. And if you expect digital connections, you're in the wrong place – the PPA-1 is deliberately, purely analogue.\u003c\/p\u003e\u003ch3\u003eWill the PPA-1 suit my cartridge?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. MM runs at 47 kΩ with adjustable capacitance, MC via the load-free current-mode input, and the +15 dB of extra gain also captures very quiet MC systems. We're happy to work out with you which combination gets the most out of your setup.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference phono stage that combines understatement with substance: quiet, flexible, uncompromisingly tuned for analogue – and remarkably reasonably priced for this league. Want to know whether it suits your turntable and cartridge? Tell us what you're running – we at HD Zürisee in Wädenswil will advise you on load, gain and integration, and set up the PPA-1 properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PPA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dedicated phono preamplifier (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain (1 kHz):\u003c\/strong\u003e MM 40 dB, MC 60 dB (depending on cartridge impedance)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional gain:\u003c\/strong\u003e 0 \/ +3 \/ +6 \/ +9 \/ +12 \/ +15 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC input:\u003c\/strong\u003e current mode (current-driven, automatic matching)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance MM:\u003c\/strong\u003e 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCapacitive load MM:\u003c\/strong\u003e 100 \/ 220 \/ 320 \/ 470 \/ 570 \/ 790 pF (front panel or remote control)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 6 V RMS (RCA) \/ 12 V RMS (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack, dedicated amplifier with analogue volume control, 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA pair (MM\/MC), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on\/off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. \u0026lt; 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PPA-1 support MM and MC cartridges?\u003c\/h3\u003e\u003cp\u003eYes, both. MM runs at 47 kΩ with adjustable capacitance (100–790 pF), while MC runs through a current-driven current-mode input that adapts automatically. Gain is 40 dB (MM) or 60 dB (MC), plus +15 dB in reserve for quiet systems. Both inputs are freely configurable.\u003c\/p\u003e\u003ch3\u003eCan I connect two turntables?\u003c\/h3\u003e\u003cp\u003eYes. The PPA-1 has two separate inputs that each remember all their settings individually – for two turntables or one deck with two tonearms. When you switch, you don't need to readjust anything; each system keeps its load, capacitance and gain.\u003c\/p\u003e\u003ch3\u003eDoes the PPA-1 have a headphone output?\u003c\/h3\u003e\u003cp\u003eYes. The front panel has a 6.3 mm jack with its own discretely built headphone amplifier and analogue volume control. Plug in a pair of headphones and the line outputs switch off automatically – so you can enjoy vinyl directly and quietly, too.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PPA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PPA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a phono stage only really shines with the right cartridge and a clean setup. Here in Wädenswil, we work out the load, capacitance and gain for your system, match turntables and cables to suit – and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, a fine \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a high-quality \u003ca href=\"\/en\/collections\/kabel\"\u003einterconnect cable\u003c\/a\u003e to connect it all.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279300059472,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-ppa-1-phono-vorverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785898607"},{"product_id":"gatoaudioppa1wh","title":"Gato Audio PPA-1 Phono Preamplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio PPA-1 is a dedicated phono preamplifier from the Danish manufacturer Gato Audio for MM and MC cartridges.\u003c\/p\u003e\u003cp\u003eIt's Gato's first standalone phono stage – and it arrives with reference-level ambitions right away. A current-mode MC input, freely adjustable MM capacitance, two fully separate, storable inputs and a dedicated headphone amplifier all sit behind the understated high-gloss front. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PPA-1?\u003c\/h2\u003e\u003cp\u003eBecause here, every detail is aimed at the groove. The MC input works in current mode: it amplifies the cartridge's current rather than its voltage, automatically finding the best load for virtually any system – with no impedance guesswork and minimal noise. For MM systems, you set the capacitive load (100 to 790 pF) directly on the front panel or via remote control. Gain is 40 dB (MM) or 60 dB (MC), with an additional +15 dB in reserve for temperamental low-output MCs that don't play by the rules. Two fully configurable inputs remember all settings individually – ideal for two turntables or a deck with two tonearms. The circuit is a hybrid of discrete and IC stages with a newly developed, discrete push-pull FET output stage, built fully balanced. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA pitch-black background and a wealth of fine detail that gets lost with weaker phono stages. The current-mode MC input keeps noise down, while the balanced FET output stage keeps the soundstage wide and stable – instruments stand cleanly separated, and micro-dynamics and reverb tails are preserved. A switchable subsonic filter keeps footfall and record warp out of the bass without ever sounding like a filter.\u003c\/p\u003e\u003ch3\u003eWho is the PPA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PPA-1 is for anyone who takes vinyl seriously and wants a flexible, extremely quiet reference phono stage for MM and MC – ideally with two systems or tonearms and headphone ambitions. If you're running an entry-level turntable with a standard cartridge, you'll never unlock its potential: that's a Formula 1 gearbox on a shopping trolley. And if you expect digital connections, you're in the wrong place – the PPA-1 is deliberately, purely analogue.\u003c\/p\u003e\u003ch3\u003eWill the PPA-1 suit my cartridge?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. MM runs at 47 kΩ with adjustable capacitance, MC via the load-free current-mode input, and the +15 dB of extra gain also captures very quiet MC systems. We're happy to work out with you which combination gets the most out of your setup.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference phono stage that combines understatement with substance: quiet, flexible, uncompromisingly tuned for analogue – and remarkably reasonably priced for this league. Want to know whether it suits your turntable and cartridge? Tell us what you're running – we at HD Zürisee in Wädenswil will advise you on load, gain and integration, and set up the PPA-1 properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PPA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dedicated phono preamplifier (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain (1 kHz):\u003c\/strong\u003e MM 40 dB, MC 60 dB (depending on cartridge impedance)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional gain:\u003c\/strong\u003e 0 \/ +3 \/ +6 \/ +9 \/ +12 \/ +15 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC input:\u003c\/strong\u003e current mode (current-driven, automatic matching)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance MM:\u003c\/strong\u003e 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCapacitive load MM:\u003c\/strong\u003e 100 \/ 220 \/ 320 \/ 470 \/ 570 \/ 790 pF (front panel or remote control)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 6 V RMS (RCA) \/ 12 V RMS (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack, dedicated amplifier with analogue volume control, 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA pair (MM\/MC), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on\/off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. \u0026lt; 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PPA-1 support MM and MC cartridges?\u003c\/h3\u003e\u003cp\u003eYes, both. MM runs at 47 kΩ with adjustable capacitance (100–790 pF), while MC runs through a current-driven current-mode input that adapts automatically. Gain is 40 dB (MM) or 60 dB (MC), plus +15 dB in reserve for quiet systems. Both inputs are freely configurable.\u003c\/p\u003e\u003ch3\u003eCan I connect two turntables?\u003c\/h3\u003e\u003cp\u003eYes. The PPA-1 has two separate inputs that each remember all their settings individually – for two turntables or one deck with two tonearms. When you switch, you don't need to readjust anything; each system keeps its load, capacitance and gain.\u003c\/p\u003e\u003ch3\u003eDoes the PPA-1 have a headphone output?\u003c\/h3\u003e\u003cp\u003eYes. The front panel has a 6.3 mm jack with its own discretely built headphone amplifier and analogue volume control. Plug in a pair of headphones and the line outputs switch off automatically – so you can enjoy vinyl directly and quietly, too.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PPA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PPA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a phono stage only really shines with the right cartridge and a clean setup. Here in Wädenswil, we work out the load, capacitance and gain for your system, match turntables and cables to suit – and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, a fine \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a high-quality \u003ca href=\"\/en\/collections\/kabel\"\u003einterconnect cable\u003c\/a\u003e to connect it all.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279302451536,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-ppa-1-phono-vorverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785898607"},{"product_id":"gatoaudioppa1wn","title":"Gato Audio PPA-1 Phono Preamplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio PPA-1 is a dedicated phono preamplifier from the Danish manufacturer Gato Audio for MM and MC cartridges.\u003c\/p\u003e\u003cp\u003eIt's Gato's first standalone phono stage – and it arrives with reference-level ambitions right away. A current-mode MC input, freely adjustable MM capacitance, two fully separate, storable inputs and a dedicated headphone amplifier all sit behind the understated high-gloss front. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PPA-1?\u003c\/h2\u003e\u003cp\u003eBecause here, every detail is aimed at the groove. The MC input works in current mode: it amplifies the cartridge's current rather than its voltage, automatically finding the best load for virtually any system – with no impedance guesswork and minimal noise. For MM systems, you set the capacitive load (100 to 790 pF) directly on the front panel or via remote control. Gain is 40 dB (MM) or 60 dB (MC), with an additional +15 dB in reserve for temperamental low-output MCs that don't play by the rules. Two fully configurable inputs remember all settings individually – ideal for two turntables or a deck with two tonearms. The circuit is a hybrid of discrete and IC stages with a newly developed, discrete push-pull FET output stage, built fully balanced. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA pitch-black background and a wealth of fine detail that gets lost with weaker phono stages. The current-mode MC input keeps noise down, while the balanced FET output stage keeps the soundstage wide and stable – instruments stand cleanly separated, and micro-dynamics and reverb tails are preserved. A switchable subsonic filter keeps footfall and record warp out of the bass without ever sounding like a filter.\u003c\/p\u003e\u003ch3\u003eWho is the PPA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PPA-1 is for anyone who takes vinyl seriously and wants a flexible, extremely quiet reference phono stage for MM and MC – ideally with two systems or tonearms and headphone ambitions. If you're running an entry-level turntable with a standard cartridge, you'll never unlock its potential: that's a Formula 1 gearbox on a shopping trolley. And if you expect digital connections, you're in the wrong place – the PPA-1 is deliberately, purely analogue.\u003c\/p\u003e\u003ch3\u003eWill the PPA-1 suit my cartridge?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. MM runs at 47 kΩ with adjustable capacitance, MC via the load-free current-mode input, and the +15 dB of extra gain also captures very quiet MC systems. We're happy to work out with you which combination gets the most out of your setup.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference phono stage that combines understatement with substance: quiet, flexible, uncompromisingly tuned for analogue – and remarkably reasonably priced for this league. Want to know whether it suits your turntable and cartridge? Tell us what you're running – we at HD Zürisee in Wädenswil will advise you on load, gain and integration, and set up the PPA-1 properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PPA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dedicated phono preamplifier (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain (1 kHz):\u003c\/strong\u003e MM 40 dB, MC 60 dB (depending on cartridge impedance)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional gain:\u003c\/strong\u003e 0 \/ +3 \/ +6 \/ +9 \/ +12 \/ +15 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC input:\u003c\/strong\u003e current mode (current-driven, automatic matching)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance MM:\u003c\/strong\u003e 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCapacitive load MM:\u003c\/strong\u003e 100 \/ 220 \/ 320 \/ 470 \/ 570 \/ 790 pF (front panel or remote control)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 6 V RMS (RCA) \/ 12 V RMS (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack, dedicated amplifier with analogue volume control, 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA pair (MM\/MC), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on\/off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. \u0026lt; 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PPA-1 support MM and MC cartridges?\u003c\/h3\u003e\u003cp\u003eYes, both. MM runs at 47 kΩ with adjustable capacitance (100–790 pF), while MC runs through a current-driven current-mode input that adapts automatically. Gain is 40 dB (MM) or 60 dB (MC), plus +15 dB in reserve for quiet systems. Both inputs are freely configurable.\u003c\/p\u003e\u003ch3\u003eCan I connect two turntables?\u003c\/h3\u003e\u003cp\u003eYes. The PPA-1 has two separate inputs that each remember all their settings individually – for two turntables or one deck with two tonearms. When you switch, you don't need to readjust anything; each system keeps its load, capacitance and gain.\u003c\/p\u003e\u003ch3\u003eDoes the PPA-1 have a headphone output?\u003c\/h3\u003e\u003cp\u003eYes. The front panel has a 6.3 mm jack with its own discretely built headphone amplifier and analogue volume control. Plug in a pair of headphones and the line outputs switch off automatically – so you can enjoy vinyl directly and quietly, too.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PPA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PPA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a phono stage only really shines with the right cartridge and a clean setup. Here in Wädenswil, we work out the load, capacitance and gain for your system, match turntables and cables to suit – and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, a fine \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a high-quality \u003ca href=\"\/en\/collections\/kabel\"\u003einterconnect cable\u003c\/a\u003e to connect it all.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279304384848,"sku":null,"price":3495.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-ppa-1-phono-vorverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785898607"},{"product_id":"gatoaudioppa1cu","title":"Gato Audio PPA-1 Phono Preamplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio PPA-1 is a dedicated phono preamplifier from the Danish manufacturer Gato Audio for MM and MC cartridges.\u003c\/p\u003e\u003cp\u003eIt's Gato's first standalone phono stage – and it arrives with reference-level ambitions right away. A current-mode MC input, freely adjustable MM capacitance, two fully separate, storable inputs and a dedicated headphone amplifier all sit behind the understated high-gloss front. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PPA-1?\u003c\/h2\u003e\u003cp\u003eBecause here, every detail is aimed at the groove. The MC input works in current mode: it amplifies the cartridge's current rather than its voltage, automatically finding the best load for virtually any system – with no impedance guesswork and minimal noise. For MM systems, you set the capacitive load (100 to 790 pF) directly on the front panel or via remote control. Gain is 40 dB (MM) or 60 dB (MC), with an additional +15 dB in reserve for temperamental low-output MCs that don't play by the rules. Two fully configurable inputs remember all settings individually – ideal for two turntables or a deck with two tonearms. The circuit is a hybrid of discrete and IC stages with a newly developed, discrete push-pull FET output stage, built fully balanced. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA pitch-black background and a wealth of fine detail that gets lost with weaker phono stages. The current-mode MC input keeps noise down, while the balanced FET output stage keeps the soundstage wide and stable – instruments stand cleanly separated, and micro-dynamics and reverb tails are preserved. A switchable subsonic filter keeps footfall and record warp out of the bass without ever sounding like a filter.\u003c\/p\u003e\u003ch3\u003eWho is the PPA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PPA-1 is for anyone who takes vinyl seriously and wants a flexible, extremely quiet reference phono stage for MM and MC – ideally with two systems or tonearms and headphone ambitions. If you're running an entry-level turntable with a standard cartridge, you'll never unlock its potential: that's a Formula 1 gearbox on a shopping trolley. And if you expect digital connections, you're in the wrong place – the PPA-1 is deliberately, purely analogue.\u003c\/p\u003e\u003ch3\u003eWill the PPA-1 suit my cartridge?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. MM runs at 47 kΩ with adjustable capacitance, MC via the load-free current-mode input, and the +15 dB of extra gain also captures very quiet MC systems. We're happy to work out with you which combination gets the most out of your setup.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference phono stage that combines understatement with substance: quiet, flexible, uncompromisingly tuned for analogue – and remarkably reasonably priced for this league. Want to know whether it suits your turntable and cartridge? Tell us what you're running – we at HD Zürisee in Wädenswil will advise you on load, gain and integration, and set up the PPA-1 properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PPA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dedicated phono preamplifier (MM\/MC)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGain (1 kHz):\u003c\/strong\u003e MM 40 dB, MC 60 dB (depending on cartridge impedance)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdditional gain:\u003c\/strong\u003e 0 \/ +3 \/ +6 \/ +9 \/ +12 \/ +15 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMC input:\u003c\/strong\u003e current mode (current-driven, automatic matching)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance MM:\u003c\/strong\u003e 47 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCapacitive load MM:\u003c\/strong\u003e 100 \/ 220 \/ 320 \/ 470 \/ 570 \/ 790 pF (front panel or remote control)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSubsonic filter:\u003c\/strong\u003e switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 80 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level:\u003c\/strong\u003e 6 V RMS (RCA) \/ 12 V RMS (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack, dedicated amplifier with analogue volume control, 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2× RCA pair (MM\/MC), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on\/off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. \u0026lt; 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom Colour (individual high-gloss lacquer)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the PPA-1 support MM and MC cartridges?\u003c\/h3\u003e\u003cp\u003eYes, both. MM runs at 47 kΩ with adjustable capacitance (100–790 pF), while MC runs through a current-driven current-mode input that adapts automatically. Gain is 40 dB (MM) or 60 dB (MC), plus +15 dB in reserve for quiet systems. Both inputs are freely configurable.\u003c\/p\u003e\u003ch3\u003eCan I connect two turntables?\u003c\/h3\u003e\u003cp\u003eYes. The PPA-1 has two separate inputs that each remember all their settings individually – for two turntables or one deck with two tonearms. When you switch, you don't need to readjust anything; each system keeps its load, capacitance and gain.\u003c\/p\u003e\u003ch3\u003eDoes the PPA-1 have a headphone output?\u003c\/h3\u003e\u003cp\u003eYes. The front panel has a 6.3 mm jack with its own discretely built headphone amplifier and analogue volume control. Plug in a pair of headphones and the line outputs switch off automatically – so you can enjoy vinyl directly and quietly, too.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PPA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PPA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a phono stage only really shines with the right cartridge and a clean setup. Here in Wädenswil, we work out the load, capacitance and gain for your system, match turntables and cables to suit – and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e, a fine \u003ca href=\"\/en\/collections\/tonabnehmer\"\u003ecartridge\u003c\/a\u003e and a high-quality \u003ca href=\"\/en\/collections\/kabel\"\u003einterconnect cable\u003c\/a\u003e to connect it all.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279306252624,"sku":null,"price":3895.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-ppa-1-phono-vorverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785898607"},{"product_id":"gatoaudiopre1bl","title":"Gato Audio PRE-1 Preamplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio PRE-1 is a dual-mono, fully balanced reference preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eGato developed it as an equal partner to the PWR-222 mono power amplifiers: balanced throughout, with separate power supplies per channel, an OLED display with an analogue VU meter, freely nameable inputs and a dedicated headphone amplifier. Two expansion slots keep it open for the future. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRE-1?\u003c\/h2\u003e\u003cp\u003eBecause it leaves the signal as untouched as almost no other preamp. The PRE-1 is fully balanced from input to output – including the tricky volume control – and built on the dual-mono principle: the left and right channels each have their own low-noise power supply, with shared circuitry only for logic and control. The result is figures that speak for themselves: 120 dB signal-to-noise ratio, 0.001 % distortion and over 113 dB of channel separation. Using the OLED display, you name each input and set a level offset per source – no more volume jumps between a quiet phono source and a loud digital one. And because a 32-bit microprocessor only handles logic and operation, the signal path stays purely analogue. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA great deal of quiet, and a soundstage that genuinely opens up in width and depth. Because the PRE-1 contributes almost no noise or sonic character of its own, voices and instruments stand tangibly in the room, and micro-dynamics and delicate reverb tails are preserved. Paired with powerful power amplifiers – above all the Gato PWR-222 – it performs at reference level: controlled, natural, effortless.\u003c\/p\u003e\u003ch3\u003eWho is the PRE-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PRE-1 is for anyone who favours separate components and wants a transparent, fully balanced reference preamp as the hub of their system – with five inputs, a headphone output and room to expand. If you'd rather have streaming and a DAC built in from the start, the PRD-3S NPM or a DIA-NPM integrated amplifier serves you more directly: the base PRE-1 is a purely analogue line preamp. And if you only run a single source, you're buying more preamp than you'll ever need here – lovely, but generously specified.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming?\u003c\/h3\u003e\u003cp\u003eYes. Two expansion slots accept optional Gato modules: an MM\/MC phono stage (MMC-1), a SABRE DAC (ESS-1) and a Roon Ready streamer (NPM-2, only together with the DAC module). That way, the PRE-1 grows with your system. We're happy to discuss with you which expansion makes sense for you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference preamplifier that combines understatement with uncompromising engineering: fully balanced, dual-mono, extremely quiet – and the natural partner to the PWR-222 power amplifiers. Want to know whether the PRE-1 fits your chain? Tell us which power amplifiers, speakers and sources you're running – we at HD Zürisee in Wädenswil will advise you on the combination and sensible module expansion, and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRE-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dual-mono, fully balanced reference preamplifier (analogue)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V (0 dB) \/ 10 V max (RCA); 4.4 V (0 dB) \/ 20 V max (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 113 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. input level:\u003c\/strong\u003e 8 V (RCA) \/ 16 V (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 7 Hz – 650 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× RCA pair (RCA) + 2× XLR pair (Neutrik) – 5 inputs, gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack with volume control, output impedance 2.6 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay \u0026amp; controls:\u003c\/strong\u003e OLED display + analogue VU meter, nameable inputs, level offset per input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExpansion:\u003c\/strong\u003e 2 slots for optional Gato modules (MMC-1 phono MM\/MC, ESS-1 SABRE DAC, NPM-2 streaming)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + 2× out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 50 W, max. \u0026lt; 90 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the PRE-1 fully balanced?\u003c\/h3\u003e\u003cp\u003eYes, throughout. From the input through the volume control to the output, the PRE-1 remains balanced and is built on the dual-mono principle, with separate power supplies per channel. This delivers very low noise and low distortion – 120 dB signal-to-noise ratio and 0.001 % distortion.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming later?\u003c\/h3\u003e\u003cp\u003eYes. The PRE-1 has two expansion slots for optional Gato modules: an MM\/MC phono stage, a SABRE DAC and a Roon Ready streamer (streaming only together with the DAC module). The base PRE-1 itself is a purely analogue line preamp – you add the modules as needed.\u003c\/p\u003e\u003ch3\u003eWill the PRE-1 suit my power amplifiers?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. It offers balanced XLR and RCA outputs and a low output impedance of 100 Ω, so it can drive virtually any power amplifier. It was designed as a partner to the Gato PWR-222 mono power amplifiers, but works just as well with other amplifiers.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRE-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRE-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a preamplifier only really shines in the right environment – with matching power amplifiers, speakers and sensible module expansion. Here in Wädenswil, we work out the combination for your system, advise on expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279346721104,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pre-1-vorverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785898693"},{"product_id":"gatoaudiopre1wh","title":"Gato Audio PRE-1 Preamplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio PRE-1 is a dual-mono, fully balanced reference preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eGato developed it as an equal partner to the PWR-222 mono power amplifiers: balanced throughout, with separate power supplies per channel, an OLED display with an analogue VU meter, freely nameable inputs and a dedicated headphone amplifier. Two expansion slots keep it open for the future. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRE-1?\u003c\/h2\u003e\u003cp\u003eBecause it leaves the signal as untouched as almost no other preamp. The PRE-1 is fully balanced from input to output – including the tricky volume control – and built on the dual-mono principle: the left and right channels each have their own low-noise power supply, with shared circuitry only for logic and control. The result is figures that speak for themselves: 120 dB signal-to-noise ratio, 0.001 % distortion and over 113 dB of channel separation. Using the OLED display, you name each input and set a level offset per source – no more volume jumps between a quiet phono source and a loud digital one. And because a 32-bit microprocessor only handles logic and operation, the signal path stays purely analogue. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA great deal of quiet, and a soundstage that genuinely opens up in width and depth. Because the PRE-1 contributes almost no noise or sonic character of its own, voices and instruments stand tangibly in the room, and micro-dynamics and delicate reverb tails are preserved. Paired with powerful power amplifiers – above all the Gato PWR-222 – it performs at reference level: controlled, natural, effortless.\u003c\/p\u003e\u003ch3\u003eWho is the PRE-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PRE-1 is for anyone who favours separate components and wants a transparent, fully balanced reference preamp as the hub of their system – with five inputs, a headphone output and room to expand. If you'd rather have streaming and a DAC built in from the start, the PRD-3S NPM or a DIA-NPM integrated amplifier serves you more directly: the base PRE-1 is a purely analogue line preamp. And if you only run a single source, you're buying more preamp than you'll ever need here – lovely, but generously specified.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming?\u003c\/h3\u003e\u003cp\u003eYes. Two expansion slots accept optional Gato modules: an MM\/MC phono stage (MMC-1), a SABRE DAC (ESS-1) and a Roon Ready streamer (NPM-2, only together with the DAC module). That way, the PRE-1 grows with your system. We're happy to discuss with you which expansion makes sense for you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference preamplifier that combines understatement with uncompromising engineering: fully balanced, dual-mono, extremely quiet – and the natural partner to the PWR-222 power amplifiers. Want to know whether the PRE-1 fits your chain? Tell us which power amplifiers, speakers and sources you're running – we at HD Zürisee in Wädenswil will advise you on the combination and sensible module expansion, and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRE-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dual-mono, fully balanced reference preamplifier (analogue)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V (0 dB) \/ 10 V max (RCA); 4.4 V (0 dB) \/ 20 V max (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 113 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. input level:\u003c\/strong\u003e 8 V (RCA) \/ 16 V (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 7 Hz – 650 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× RCA pair (RCA) + 2× XLR pair (Neutrik) – 5 inputs, gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack with volume control, output impedance 2.6 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay \u0026amp; controls:\u003c\/strong\u003e OLED display + analogue VU meter, nameable inputs, level offset per input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExpansion:\u003c\/strong\u003e 2 slots for optional Gato modules (MMC-1 phono MM\/MC, ESS-1 SABRE DAC, NPM-2 streaming)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + 2× out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 50 W, max. \u0026lt; 90 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the PRE-1 fully balanced?\u003c\/h3\u003e\u003cp\u003eYes, throughout. From the input through the volume control to the output, the PRE-1 remains balanced and is built on the dual-mono principle, with separate power supplies per channel. This delivers very low noise and low distortion – 120 dB signal-to-noise ratio and 0.001 % distortion.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming later?\u003c\/h3\u003e\u003cp\u003eYes. The PRE-1 has two expansion slots for optional Gato modules: an MM\/MC phono stage, a SABRE DAC and a Roon Ready streamer (streaming only together with the DAC module). The base PRE-1 itself is a purely analogue line preamp – you add the modules as needed.\u003c\/p\u003e\u003ch3\u003eWill the PRE-1 suit my power amplifiers?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. It offers balanced XLR and RCA outputs and a low output impedance of 100 Ω, so it can drive virtually any power amplifier. It was designed as a partner to the Gato PWR-222 mono power amplifiers, but works just as well with other amplifiers.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRE-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRE-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a preamplifier only really shines in the right environment – with matching power amplifiers, speakers and sensible module expansion. Here in Wädenswil, we work out the combination for your system, advise on expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279348228432,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pre-1-vorverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785898693"},{"product_id":"gatoaudiopre1wn","title":"Gato Audio PRE-1 Preamplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio PRE-1 is a dual-mono, fully balanced reference preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eGato developed it as an equal partner to the PWR-222 mono power amplifiers: balanced throughout, with separate power supplies per channel, an OLED display with an analogue VU meter, freely nameable inputs and a dedicated headphone amplifier. Two expansion slots keep it open for the future. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRE-1?\u003c\/h2\u003e\u003cp\u003eBecause it leaves the signal as untouched as almost no other preamp. The PRE-1 is fully balanced from input to output – including the tricky volume control – and built on the dual-mono principle: the left and right channels each have their own low-noise power supply, with shared circuitry only for logic and control. The result is figures that speak for themselves: 120 dB signal-to-noise ratio, 0.001 % distortion and over 113 dB of channel separation. Using the OLED display, you name each input and set a level offset per source – no more volume jumps between a quiet phono source and a loud digital one. And because a 32-bit microprocessor only handles logic and operation, the signal path stays purely analogue. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA great deal of quiet, and a soundstage that genuinely opens up in width and depth. Because the PRE-1 contributes almost no noise or sonic character of its own, voices and instruments stand tangibly in the room, and micro-dynamics and delicate reverb tails are preserved. Paired with powerful power amplifiers – above all the Gato PWR-222 – it performs at reference level: controlled, natural, effortless.\u003c\/p\u003e\u003ch3\u003eWho is the PRE-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PRE-1 is for anyone who favours separate components and wants a transparent, fully balanced reference preamp as the hub of their system – with five inputs, a headphone output and room to expand. If you'd rather have streaming and a DAC built in from the start, the PRD-3S NPM or a DIA-NPM integrated amplifier serves you more directly: the base PRE-1 is a purely analogue line preamp. And if you only run a single source, you're buying more preamp than you'll ever need here – lovely, but generously specified.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming?\u003c\/h3\u003e\u003cp\u003eYes. Two expansion slots accept optional Gato modules: an MM\/MC phono stage (MMC-1), a SABRE DAC (ESS-1) and a Roon Ready streamer (NPM-2, only together with the DAC module). That way, the PRE-1 grows with your system. We're happy to discuss with you which expansion makes sense for you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference preamplifier that combines understatement with uncompromising engineering: fully balanced, dual-mono, extremely quiet – and the natural partner to the PWR-222 power amplifiers. Want to know whether the PRE-1 fits your chain? Tell us which power amplifiers, speakers and sources you're running – we at HD Zürisee in Wädenswil will advise you on the combination and sensible module expansion, and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRE-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dual-mono, fully balanced reference preamplifier (analogue)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V (0 dB) \/ 10 V max (RCA); 4.4 V (0 dB) \/ 20 V max (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 113 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. input level:\u003c\/strong\u003e 8 V (RCA) \/ 16 V (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 7 Hz – 650 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× RCA pair (RCA) + 2× XLR pair (Neutrik) – 5 inputs, gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack with volume control, output impedance 2.6 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay \u0026amp; controls:\u003c\/strong\u003e OLED display + analogue VU meter, nameable inputs, level offset per input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExpansion:\u003c\/strong\u003e 2 slots for optional Gato modules (MMC-1 phono MM\/MC, ESS-1 SABRE DAC, NPM-2 streaming)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + 2× out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 50 W, max. \u0026lt; 90 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the PRE-1 fully balanced?\u003c\/h3\u003e\u003cp\u003eYes, throughout. From the input through the volume control to the output, the PRE-1 remains balanced and is built on the dual-mono principle, with separate power supplies per channel. This delivers very low noise and low distortion – 120 dB signal-to-noise ratio and 0.001 % distortion.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming later?\u003c\/h3\u003e\u003cp\u003eYes. The PRE-1 has two expansion slots for optional Gato modules: an MM\/MC phono stage, a SABRE DAC and a Roon Ready streamer (streaming only together with the DAC module). The base PRE-1 itself is a purely analogue line preamp – you add the modules as needed.\u003c\/p\u003e\u003ch3\u003eWill the PRE-1 suit my power amplifiers?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. It offers balanced XLR and RCA outputs and a low output impedance of 100 Ω, so it can drive virtually any power amplifier. It was designed as a partner to the Gato PWR-222 mono power amplifiers, but works just as well with other amplifiers.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRE-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRE-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a preamplifier only really shines in the right environment – with matching power amplifiers, speakers and sensible module expansion. Here in Wädenswil, we work out the combination for your system, advise on expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279349211472,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pre-1-vorverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785898693"},{"product_id":"gatoaudiopre1cu","title":"Gato Audio PRE-1 Preamplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio PRE-1 is a dual-mono, fully balanced reference preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eGato developed it as an equal partner to the PWR-222 mono power amplifiers: balanced throughout, with separate power supplies per channel, an OLED display with an analogue VU meter, freely nameable inputs and a dedicated headphone amplifier. Two expansion slots keep it open for the future. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio PRE-1?\u003c\/h2\u003e\u003cp\u003eBecause it leaves the signal as untouched as almost no other preamp. The PRE-1 is fully balanced from input to output – including the tricky volume control – and built on the dual-mono principle: the left and right channels each have their own low-noise power supply, with shared circuitry only for logic and control. The result is figures that speak for themselves: 120 dB signal-to-noise ratio, 0.001 % distortion and over 113 dB of channel separation. Using the OLED display, you name each input and set a level offset per source – no more volume jumps between a quiet phono source and a loud digital one. And because a 32-bit microprocessor only handles logic and operation, the signal path stays purely analogue. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA great deal of quiet, and a soundstage that genuinely opens up in width and depth. Because the PRE-1 contributes almost no noise or sonic character of its own, voices and instruments stand tangibly in the room, and micro-dynamics and delicate reverb tails are preserved. Paired with powerful power amplifiers – above all the Gato PWR-222 – it performs at reference level: controlled, natural, effortless.\u003c\/p\u003e\u003ch3\u003eWho is the PRE-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the PRE-1 is for anyone who favours separate components and wants a transparent, fully balanced reference preamp as the hub of their system – with five inputs, a headphone output and room to expand. If you'd rather have streaming and a DAC built in from the start, the PRD-3S NPM or a DIA-NPM integrated amplifier serves you more directly: the base PRE-1 is a purely analogue line preamp. And if you only run a single source, you're buying more preamp than you'll ever need here – lovely, but generously specified.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming?\u003c\/h3\u003e\u003cp\u003eYes. Two expansion slots accept optional Gato modules: an MM\/MC phono stage (MMC-1), a SABRE DAC (ESS-1) and a Roon Ready streamer (NPM-2, only together with the DAC module). That way, the PRE-1 grows with your system. We're happy to discuss with you which expansion makes sense for you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish reference preamplifier that combines understatement with uncompromising engineering: fully balanced, dual-mono, extremely quiet – and the natural partner to the PWR-222 power amplifiers. Want to know whether the PRE-1 fits your chain? Tell us which power amplifiers, speakers and sources you're running – we at HD Zürisee in Wädenswil will advise you on the combination and sensible module expansion, and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio PRE-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e dual-mono, fully balanced reference preamplifier (analogue)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V (0 dB) \/ 10 V max (RCA); 4.4 V (0 dB) \/ 20 V max (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.001 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel separation:\u003c\/strong\u003e \u0026gt; 113 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. input level:\u003c\/strong\u003e 8 V (RCA) \/ 16 V (balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ (RCA and balanced)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 7 Hz – 650 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 3× RCA pair (RCA) + 2× XLR pair (Neutrik) – 5 inputs, gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output:\u003c\/strong\u003e 6.3 mm jack with volume control, output impedance 2.6 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay \u0026amp; controls:\u003c\/strong\u003e OLED display + analogue VU meter, nameable inputs, level offset per input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExpansion:\u003c\/strong\u003e 2 slots for optional Gato modules (MMC-1 phono MM\/MC, ESS-1 SABRE DAC, NPM-2 streaming)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + 2× out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 50 W, max. \u0026lt; 90 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 42 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom Colour (individual high-gloss lacquer)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the PRE-1 fully balanced?\u003c\/h3\u003e\u003cp\u003eYes, throughout. From the input through the volume control to the output, the PRE-1 remains balanced and is built on the dual-mono principle, with separate power supplies per channel. This delivers very low noise and low distortion – 120 dB signal-to-noise ratio and 0.001 % distortion.\u003c\/p\u003e\u003ch3\u003eCan I add phono, DAC or streaming later?\u003c\/h3\u003e\u003cp\u003eYes. The PRE-1 has two expansion slots for optional Gato modules: an MM\/MC phono stage, a SABRE DAC and a Roon Ready streamer (streaming only together with the DAC module). The base PRE-1 itself is a purely analogue line preamp – you add the modules as needed.\u003c\/p\u003e\u003ch3\u003eWill the PRE-1 suit my power amplifiers?\u003c\/h3\u003e\u003cp\u003eIn all likelihood, yes. It offers balanced XLR and RCA outputs and a low output impedance of 100 Ω, so it can drive virtually any power amplifier. It was designed as a partner to the Gato PWR-222 mono power amplifiers, but works just as well with other amplifiers.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the PRE-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your speakers or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio PRE-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a preamplifier only really shines in the right environment – with matching power amplifiers, speakers and sensible module expansion. Here in Wädenswil, we work out the combination for your system, advise on expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279352914256,"sku":null,"price":5395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-pre-1-vorverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785898693"},{"product_id":"gatoaudiosda1bl","title":"Gato Audio SDA-1 DAC \u0026 Headphone Amplifier, Black High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 is a D\/A converter with a balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt accepts virtually any digital source, converts it to analogue via an ESS9038PRO Sabre chip – and outputs it to your system, directly to a power amplifier, or to headphones, as you choose. One unit, three jobs: DAC, headphone amplifier and preamplifier in a single chassis. And if you want to stream later, you can add the optional NPM-2 module. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1?\u003c\/h2\u003e\u003cp\u003eBecause it takes conversion seriously while still staying flexible. At its heart is the ESS9038PRO – the same Sabre chip found in the most expensive DACs and CD players. Gato pairs it with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections, so logic and music don't get in each other's way. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 drives a power amplifier directly, with no separate preamp needed. Seven PCM filters and an analogue input for a phono stage or another analogue source round off the picture. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC. The SDA-1 resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 is for anyone who wants a first-class digital source and also listens seriously through headphones – and who'd like the preamp taken care of as well. If you already own a high-quality preamp, simply use the SDA-1 with a fixed level as a pure DAC. If you want to stream from day one, go straight for the SDA-1 NPM with its built-in network module – adding the module to the base SDA-1 later is possible, but it's the detour. And if you listen exclusively to vinyl, you don't need it: the SDA-1 is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eCan I turn the SDA-1 into a network player?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module turns the SDA-1 into a Roon Ready streamer with Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN. Whether adding the module makes sense, or the SDA-1 NPM is the smarter choice from the start, is something we're happy to discuss with you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre DAC that combines headphone seriousness with preamp convenience in a very quiet chassis – and becomes a streamer with the NPM-2 module when needed. Want to know whether the SDA-1 fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, module expansion) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, headphone amplifier \u0026amp; preamplifier (optionally streaming-capable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming (optional):\u003c\/strong\u003e NPM-2 module – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1?\u003c\/h3\u003e\u003cp\u003eNo. The SDA-1 has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – so the preamplifier is already built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan I upgrade the SDA-1 to a network player later?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. If you want to stream from the start, go straight for the SDA-1 NPM with the module built in at the factory. Without the module, the SDA-1 plays over USB, optical, coaxial and the analogue input.\u003c\/p\u003e\u003ch3\u003eWhich formats does the SDA-1 play?\u003c\/h3\u003e\u003cp\u003eOver USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA. The optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters let you fine-tune the sound to your taste.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a DAC in this class only really comes into its own in the right setup – fixed or variable, a matching power amplifier or active speakers, the right headphones. Here in Wädenswil, we work out the configuration for your system, advise on module expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279488508240,"sku":null,"price":4395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-dac-kopfhoererverstaerker-schwarz-hochglanz-schraegansicht.jpg?v=1785898673"},{"product_id":"gatoaudiosda1wh","title":"Gato Audio SDA-1 DAC \u0026 Headphone Amplifier, White High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 is a D\/A converter with a balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt accepts virtually any digital source, converts it to analogue via an ESS9038PRO Sabre chip – and outputs it to your system, directly to a power amplifier, or to headphones, as you choose. One unit, three jobs: DAC, headphone amplifier and preamplifier in a single chassis. And if you want to stream later, you can add the optional NPM-2 module. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1?\u003c\/h2\u003e\u003cp\u003eBecause it takes conversion seriously while still staying flexible. At its heart is the ESS9038PRO – the same Sabre chip found in the most expensive DACs and CD players. Gato pairs it with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections, so logic and music don't get in each other's way. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 drives a power amplifier directly, with no separate preamp needed. Seven PCM filters and an analogue input for a phono stage or another analogue source round off the picture. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC. The SDA-1 resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 is for anyone who wants a first-class digital source and also listens seriously through headphones – and who'd like the preamp taken care of as well. If you already own a high-quality preamp, simply use the SDA-1 with a fixed level as a pure DAC. If you want to stream from day one, go straight for the SDA-1 NPM with its built-in network module – adding the module to the base SDA-1 later is possible, but it's the detour. And if you listen exclusively to vinyl, you don't need it: the SDA-1 is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eCan I turn the SDA-1 into a network player?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module turns the SDA-1 into a Roon Ready streamer with Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN. Whether adding the module makes sense, or the SDA-1 NPM is the smarter choice from the start, is something we're happy to discuss with you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre DAC that combines headphone seriousness with preamp convenience in a very quiet chassis – and becomes a streamer with the NPM-2 module when needed. Want to know whether the SDA-1 fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, module expansion) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, headphone amplifier \u0026amp; preamplifier (optionally streaming-capable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming (optional):\u003c\/strong\u003e NPM-2 module – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1?\u003c\/h3\u003e\u003cp\u003eNo. The SDA-1 has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – so the preamplifier is already built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan I upgrade the SDA-1 to a network player later?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. If you want to stream from the start, go straight for the SDA-1 NPM with the module built in at the factory. Without the module, the SDA-1 plays over USB, optical, coaxial and the analogue input.\u003c\/p\u003e\u003ch3\u003eWhich formats does the SDA-1 play?\u003c\/h3\u003e\u003cp\u003eOver USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA. The optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters let you fine-tune the sound to your taste.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a DAC in this class only really comes into its own in the right setup – fixed or variable, a matching power amplifier or active speakers, the right headphones. Here in Wädenswil, we work out the configuration for your system, advise on module expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279494340944,"sku":null,"price":4395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-dac-kopfhoererverstaerker-weiss-hochglanz-schraegansicht.jpg?v=1785898673"},{"product_id":"gatoaudiosda1wn","title":"Gato Audio SDA-1 DAC \u0026 Headphone Amplifier, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 is a D\/A converter with a balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt accepts virtually any digital source, converts it to analogue via an ESS9038PRO Sabre chip – and outputs it to your system, directly to a power amplifier, or to headphones, as you choose. One unit, three jobs: DAC, headphone amplifier and preamplifier in a single chassis. And if you want to stream later, you can add the optional NPM-2 module. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1?\u003c\/h2\u003e\u003cp\u003eBecause it takes conversion seriously while still staying flexible. At its heart is the ESS9038PRO – the same Sabre chip found in the most expensive DACs and CD players. Gato pairs it with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections, so logic and music don't get in each other's way. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 drives a power amplifier directly, with no separate preamp needed. Seven PCM filters and an analogue input for a phono stage or another analogue source round off the picture. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC. The SDA-1 resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 is for anyone who wants a first-class digital source and also listens seriously through headphones – and who'd like the preamp taken care of as well. If you already own a high-quality preamp, simply use the SDA-1 with a fixed level as a pure DAC. If you want to stream from day one, go straight for the SDA-1 NPM with its built-in network module – adding the module to the base SDA-1 later is possible, but it's the detour. And if you listen exclusively to vinyl, you don't need it: the SDA-1 is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eCan I turn the SDA-1 into a network player?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module turns the SDA-1 into a Roon Ready streamer with Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN. Whether adding the module makes sense, or the SDA-1 NPM is the smarter choice from the start, is something we're happy to discuss with you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre DAC that combines headphone seriousness with preamp convenience in a very quiet chassis – and becomes a streamer with the NPM-2 module when needed. Want to know whether the SDA-1 fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, module expansion) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, headphone amplifier \u0026amp; preamplifier (optionally streaming-capable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming (optional):\u003c\/strong\u003e NPM-2 module – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1?\u003c\/h3\u003e\u003cp\u003eNo. The SDA-1 has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – so the preamplifier is already built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan I upgrade the SDA-1 to a network player later?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. If you want to stream from the start, go straight for the SDA-1 NPM with the module built in at the factory. Without the module, the SDA-1 plays over USB, optical, coaxial and the analogue input.\u003c\/p\u003e\u003ch3\u003eWhich formats does the SDA-1 play?\u003c\/h3\u003e\u003cp\u003eOver USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA. The optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters let you fine-tune the sound to your taste.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a DAC in this class only really comes into its own in the right setup – fixed or variable, a matching power amplifier or active speakers, the right headphones. Here in Wädenswil, we work out the configuration for your system, advise on module expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279516557648,"sku":null,"price":4395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-dac-kopfhoererverstaerker-nussbaum-hochglanz-schraegansicht.jpg?v=1785898673"},{"product_id":"gatoaudiosda1cu","title":"Gato Audio SDA-1 DAC \u0026 Headphone Amplifier, Custom Colour High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 is a D\/A converter with a balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt accepts virtually any digital source, converts it to analogue via an ESS9038PRO Sabre chip – and outputs it to your system, directly to a power amplifier, or to headphones, as you choose. One unit, three jobs: DAC, headphone amplifier and preamplifier in a single chassis. And if you want to stream later, you can add the optional NPM-2 module. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1?\u003c\/h2\u003e\u003cp\u003eBecause it takes conversion seriously while still staying flexible. At its heart is the ESS9038PRO – the same Sabre chip found in the most expensive DACs and CD players. Gato pairs it with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections, so logic and music don't get in each other's way. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 drives a power amplifier directly, with no separate preamp needed. Seven PCM filters and an analogue input for a phono stage or another analogue source round off the picture. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC. The SDA-1 resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 is for anyone who wants a first-class digital source and also listens seriously through headphones – and who'd like the preamp taken care of as well. If you already own a high-quality preamp, simply use the SDA-1 with a fixed level as a pure DAC. If you want to stream from day one, go straight for the SDA-1 NPM with its built-in network module – adding the module to the base SDA-1 later is possible, but it's the detour. And if you listen exclusively to vinyl, you don't need it: the SDA-1 is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eCan I turn the SDA-1 into a network player?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module turns the SDA-1 into a Roon Ready streamer with Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN. Whether adding the module makes sense, or the SDA-1 NPM is the smarter choice from the start, is something we're happy to discuss with you.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre DAC that combines headphone seriousness with preamp convenience in a very quiet chassis – and becomes a streamer with the NPM-2 module when needed. Want to know whether the SDA-1 fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, module expansion) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, headphone amplifier \u0026amp; preamplifier (optionally streaming-capable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming (optional):\u003c\/strong\u003e NPM-2 module – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom Colour (individual high-gloss lacquer)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1?\u003c\/h3\u003e\u003cp\u003eNo. The SDA-1 has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – so the preamplifier is already built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan I upgrade the SDA-1 to a network player later?\u003c\/h3\u003e\u003cp\u003eYes. The optional NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. If you want to stream from the start, go straight for the SDA-1 NPM with the module built in at the factory. Without the module, the SDA-1 plays over USB, optical, coaxial and the analogue input.\u003c\/p\u003e\u003ch3\u003eWhich formats does the SDA-1 play?\u003c\/h3\u003e\u003cp\u003eOver USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA. The optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters let you fine-tune the sound to your taste.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a DAC in this class only really comes into its own in the right setup – fixed or variable, a matching power amplifier or active speakers, the right headphones. Here in Wädenswil, we work out the configuration for your system, advise on module expansion, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279526748496,"sku":null,"price":4795.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-dac-kopfhoererverstaerker-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785898673"},{"product_id":"gatoaudiosda1npmbl","title":"Gato Audio SDA-1 NPM DAC \u0026 Network Player, Black High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 NPM is a D\/A converter with a factory-fitted network player, balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt's the SDA-1, with Gato's NPM-2 streaming module built in from the factory. That makes it a complete digital hub: it streams from your network, converts to analogue via an ESS9038PRO Sabre chip and outputs to your system, directly to a power amplifier, or to headphones. Four jobs in one chassis: network player, DAC, headphone amplifier and preamplifier. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1 NPM?\u003c\/h2\u003e\u003cp\u003eBecause it brings streaming and conversion together at the same high level. The built-in NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN, with no extra device needed. At the heart of the conversion is the ESS9038PRO, the same Sabre chip found in the most expensive DACs, paired with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 NPM drives a power amplifier directly, with no separate preamp needed. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC, whether the music comes from the network, the USB input or the optical connection. The SDA-1 NPM resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 NPM for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 NPM is for anyone who wants to stream from day one and also wants a first-class digital source with a serious headphone output – with the preamp taken care of too. One unit that replaces the network player, the DAC and the preamp. If you're certain you'll never stream and already own a high-quality preamp, the cheaper base SDA-1 is enough. And if you listen exclusively to vinyl, you don't need it: the SDA-1 NPM is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eWhich streaming services does the SDA-1 NPM support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and plays Tidal and Spotify Connect, Qobuz and internet radio; via Bluetooth with LDAC, your phone joins in at high quality too. The connection runs over Wi-Fi or wired LAN. We're happy to discuss with you which platform best suits your library.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre streamer that combines a network player, reference DAC, headphone seriousness and preamp convenience in a very quiet chassis. Want to know whether the SDA-1 NPM fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, network setup) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1 NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter with network player, headphone amplifier \u0026amp; preamplifier\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming:\u003c\/strong\u003e NPM-2 module (factory-fitted) – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA), 1× network (RJ45) for streaming\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1 NPM, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the SDA-1 NPM and the standard SDA-1?\u003c\/h3\u003e\u003cp\u003eThe SDA-1 NPM has the NPM-2 network streaming module already built in at the factory – so it's a fully-fledged network player. The base SDA-1 only plays over USB, optical, coaxial and the analogue input, and can be upgraded later. If you want to stream from the start, the NPM is cheaper and simpler.\u003c\/p\u003e\u003ch3\u003eWhich streaming services and formats does it support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. Over USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA; the optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters fine-tune the sound.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1 NPM?\u003c\/h3\u003e\u003cp\u003eNo. It has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – the preamplifier is built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 NPM available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming DAC in this class only really comes into its own in the right setup – properly integrated into your network, configured fixed or variable, with a matching power amplifier or active speakers and the right headphones. Here in Wädenswil, we set up Roon and the services, work out the configuration for your system, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279579570512,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-npm-dac-netzwerkplayer-schwarz-hochglanz-schraegansicht.jpg?v=1785899723"},{"product_id":"gatoaudiosda1npmwh","title":"Gato Audio SDA-1 NPM DAC \u0026 Network Player, White High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 NPM is a D\/A converter with a factory-fitted network player, balanced headphone amplifier and preamplifier from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt's the SDA-1, with Gato's NPM-2 streaming module built in from the factory. That makes it a complete digital hub: it streams from your network, converts to analogue via an ESS9038PRO Sabre chip and outputs to your system, directly to a power amplifier, or to headphones. Four jobs in one chassis: network player, DAC, headphone amplifier and preamplifier. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1 NPM?\u003c\/h2\u003e\u003cp\u003eBecause it brings streaming and conversion together at the same high level. The built-in NPM-2 module makes it Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN, with no extra device needed. At the heart of the conversion is the ESS9038PRO, the same Sabre chip found in the most expensive DACs, paired with a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analogue and digital sections. The output is fully balanced and built with discrete circuitry, with volume controlled in the analogue domain – either fixed (as a pure source) or variable, in which case the SDA-1 NPM drives a power amplifier directly, with no separate preamp needed. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA wealth of detail without harshness – the signature of a well-executed Sabre DAC, whether the music comes from the network, the USB input or the optical connection. The SDA-1 NPM resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002 % distortion) and stays musical rather than analytical. Through headphones it gets intimate: the balanced output delivers up to 3 W at 33 Ω, driving even demanding over-ears with ease, while the unbalanced 6.3 mm output covers everyday listening. Whether through your system or straight to your ears, the soundstage stays clean and voices remain tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 NPM for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eStraight talk: the SDA-1 NPM is for anyone who wants to stream from day one and also wants a first-class digital source with a serious headphone output – with the preamp taken care of too. One unit that replaces the network player, the DAC and the preamp. If you're certain you'll never stream and already own a high-quality preamp, the cheaper base SDA-1 is enough. And if you listen exclusively to vinyl, you don't need it: the SDA-1 NPM is the digital hub, not the analogue one.\u003c\/p\u003e\u003ch3\u003eWhich streaming services does the SDA-1 NPM support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and plays Tidal and Spotify Connect, Qobuz and internet radio; via Bluetooth with LDAC, your phone joins in at high quality too. The connection runs over Wi-Fi or wired LAN. We're happy to discuss with you which platform best suits your library.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre streamer that combines a network player, reference DAC, headphone seriousness and preamp convenience in a very quiet chassis. Want to know whether the SDA-1 NPM fits your chain? Tell us which sources, headphones and power amplifiers you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, network setup) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1 NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter with network player, headphone amplifier \u0026amp; preamplifier\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStreaming:\u003c\/strong\u003e NPM-2 module (factory-fitted) – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMax. output level (analogue source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amplifier directly)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA), 1× network (RJ45) for streaming\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V in + out (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SDA-1 NPM, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the SDA-1 NPM and the standard SDA-1?\u003c\/h3\u003e\u003cp\u003eThe SDA-1 NPM has the NPM-2 network streaming module already built in at the factory – so it's a fully-fledged network player. The base SDA-1 only plays over USB, optical, coaxial and the analogue input, and can be upgraded later. If you want to stream from the start, the NPM is cheaper and simpler.\u003c\/p\u003e\u003ch3\u003eWhich streaming services and formats does it support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. Over USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA; the optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters fine-tune the sound.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamplifier for the SDA-1 NPM?\u003c\/h3\u003e\u003cp\u003eNo. It has a fully balanced, analogue-controlled volume and, with variable output, can drive a power amplifier directly – the preamplifier is built in. If you want to run it as a pure source into an existing preamp, simply set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eDoes the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W at 33 Ω, and still 850 mW at 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. Output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analogue volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 NPM available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, and on request in an individual custom colour finish. That way it matches your other components or your living space. Gato produces the custom colour finish to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 NPM at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming DAC in this class only really comes into its own in the right setup – properly integrated into your network, configured fixed or variable, with a matching power amplifier or active speakers and the right headphones. Here in Wädenswil, we set up Roon and the services, work out the configuration for your system, and install everything with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the right \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279580750160,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-npm-dac-netzwerkplayer-weiss-hochglanz-schraegansicht.jpg?v=1785899723"},{"product_id":"gatoaudiosda1npmwn","title":"Gato Audio SDA-1 NPM DAC \u0026 Network Player, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 NPM is a D\/A converter with a factory-fitted network player, balanced headphone amplifier and preamp, from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt's the SDA-1, with Gato's NPM-2 streaming module built in from the factory. That turns it into a complete digital hub: it streams from your network, converts to analog via an ESS9038PRO Sabre chip, and feeds your system, a power amp directly, or your headphones. Four jobs in one chassis: network player, DAC, headphone amplifier and preamp. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1 NPM?\u003c\/h2\u003e\u003cp\u003eBecause it brings streaming and conversion together at the same high level. The built-in NPM-2 module makes it Roon Ready and adds Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN, with no extra box needed. At the heart of the conversion sits the ESS9038PRO, the same Sabre chip found in the most expensive DACs, flanked by a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analog and digital sections. The output is fully balanced and discrete, with the volume controlled in the analog domain – either fixed (as a pure source) or variable, in which case the SDA-1 NPM drives a power amp directly, with no separate preamp needed. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eRich detail without harshness – the signature of a well-implemented Sabre DAC, whether the music comes from the network, the USB input or the optical connection. The SDA-1 NPM resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002% distortion), and stays musical rather than analytical. Things get intimate on headphones: the balanced output delivers up to 3 W into 33 Ω, handling even demanding over-ears, while the unbalanced 6.3 mm output covers everyday use. Whether through your system or straight to your ears, the soundstage stays clean and voices stay tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 NPM for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the SDA-1 NPM is for anyone who wants to stream from day one while also getting a first-class digital source with a serious headphone output – with the preamp taken care of too. One device that replaces the network player, the DAC and the preamp. If you'll definitely never stream and already own a high-quality preamp, the cheaper base SDA-1 will do. And if you listen exclusively to vinyl, you don't need it: the SDA-1 NPM is the digital hub, not the analog one.\u003c\/p\u003e\u003ch3\u003eWhich streaming services does the SDA-1 NPM support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and plays Tidal and Spotify Connect, Qobuz and internet radio; via Bluetooth with LDAC, your phone joins in at high quality too. The connection runs over Wi-Fi or wired LAN. We're happy to discuss which platform suits your library best.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre streamer that bundles network player, reference-grade DAC, serious headphone drive and preamp convenience into one very quiet chassis. Want to know if the SDA-1 NPM fits your chain? Tell us which sources, headphones and power amps you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, network setup) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1 NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter with network player, headphone amplifier \u0026amp; preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e NPM-2 module (factory-fitted) – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level (analog source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amp directly)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA), 1× network (RJ45) for streaming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on + off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss (real wood veneer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e SDA-1 NPM, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the SDA-1 NPM and the standard SDA-1?\u003c\/h3\u003e\u003cp\u003eThe SDA-1 NPM already has the NPM-2 network streaming module built in from the factory – so it's a fully-fledged network player. The base SDA-1 only plays via USB, optical, coaxial and the analog input, and can be upgraded later. If you want to stream from day one, the NPM works out cheaper and simpler.\u003c\/p\u003e\u003ch3\u003eWhich streaming services and formats does it support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. Via USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA; the optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters fine-tune the sound.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamp for the SDA-1 NPM?\u003c\/h3\u003e\u003cp\u003eNo. It has a fully balanced, analog volume control and can drive a power amp directly with its variable output – the preamp is built in. If you want to run it as a pure source into an existing preamp, just set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W into 33 Ω, and still 850 mW into 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. The output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analog volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 NPM available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request – so it fits your other components or your living space. Gato makes the custom color to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 NPM from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming DAC in this class only truly comes into its own in the right setup – properly integrated into your network, configured fixed or variable, paired with the right power amp or active speakers and the right headphones. At our shop in Wädenswil, we set up Roon and the services, work out the right configuration for your system, and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279584747856,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-npm-dac-netzwerkplayer-nussbaum-hochglanz-schraegansicht.jpg?v=1785899723"},{"product_id":"gatoaudiosda1npmcu","title":"Gato Audio SDA-1 NPM DAC \u0026 Network Player, Custom Color High Gloss","description":"\u003cp\u003eThe Gato Audio SDA-1 NPM is a D\/A converter with a factory-fitted network player, balanced headphone amplifier and preamp, from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt's the SDA-1, with Gato's NPM-2 streaming module built in from the factory. That turns it into a complete digital hub: it streams from your network, converts to analog via an ESS9038PRO Sabre chip, and feeds your system, a power amp directly, or your headphones. Four jobs in one chassis: network player, DAC, headphone amplifier and preamp. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio SDA-1 NPM?\u003c\/h2\u003e\u003cp\u003eBecause it brings streaming and conversion together at the same high level. The built-in NPM-2 module makes it Roon Ready and adds Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth – over Wi-Fi or LAN, with no extra box needed. At the heart of the conversion sits the ESS9038PRO, the same Sabre chip found in the most expensive DACs, flanked by a highly precise femto clock, seven low-noise voltage regulators and separate power supplies for the analog and digital sections. The output is fully balanced and discrete, with the volume controlled in the analog domain – either fixed (as a pure source) or variable, in which case the SDA-1 NPM drives a power amp directly, with no separate preamp needed. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eRich detail without harshness – the signature of a well-implemented Sabre DAC, whether the music comes from the network, the USB input or the optical connection. The SDA-1 NPM resolves finely, keeps the background quiet (117 dB signal-to-noise ratio, 0.002% distortion), and stays musical rather than analytical. Things get intimate on headphones: the balanced output delivers up to 3 W into 33 Ω, handling even demanding over-ears, while the unbalanced 6.3 mm output covers everyday use. Whether through your system or straight to your ears, the soundstage stays clean and voices stay tangible.\u003c\/p\u003e\u003ch3\u003eWho is the SDA-1 NPM for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the SDA-1 NPM is for anyone who wants to stream from day one while also getting a first-class digital source with a serious headphone output – with the preamp taken care of too. One device that replaces the network player, the DAC and the preamp. If you'll definitely never stream and already own a high-quality preamp, the cheaper base SDA-1 will do. And if you listen exclusively to vinyl, you don't need it: the SDA-1 NPM is the digital hub, not the analog one.\u003c\/p\u003e\u003ch3\u003eWhich streaming services does the SDA-1 NPM support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and plays Tidal and Spotify Connect, Qobuz and internet radio; via Bluetooth with LDAC, your phone joins in at high quality too. The connection runs over Wi-Fi or wired LAN. We're happy to discuss which platform suits your library best.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA versatile Danish Sabre streamer that bundles network player, reference-grade DAC, serious headphone drive and preamp convenience into one very quiet chassis. Want to know if the SDA-1 NPM fits your chain? Tell us which sources, headphones and power amps you're running – we at HD Zürisee in Wädenswil will advise you on configuration (fixed or variable, filter choice, network setup) and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio SDA-1 NPM\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter with network player, headphone amplifier \u0026amp; preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming:\u003c\/strong\u003e NPM-2 module (factory-fitted) – Roon Ready, Tidal\/Spotify Connect, Qobuz, internet radio, LDAC Bluetooth, Wi-Fi\/LAN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC chip:\u003c\/strong\u003e ESS9038PRO (SABRE), femto clock, 7 low-noise voltage regulators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 32-bit\/384 kHz, DSD up to DSD256, MQA (USB); optical\/coaxial up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level (0 dB, digital source):\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level (analog source):\u003c\/strong\u003e 7 V unbalanced \/ 11 V balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine output:\u003c\/strong\u003e fixed or variable (variable drives a power amp directly)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (−0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 117 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital filters:\u003c\/strong\u003e 7 selectable PCM oversampling filters, 4 DSD IIR filters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput gain:\u003c\/strong\u003e −10 to +10 dB per input, in 0.5 dB steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× USB-B, 2× optical (Toslink), 2× coaxial (S\/PDIF, gold-plated RCA), 1× network (RJ45) for streaming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog input:\u003c\/strong\u003e 1× RCA pair (line, gold-plated), max. 8 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair + 1× XLR pair (Neutrik), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 6.3 mm jack (unbalanced) + 4-pin XLR (balanced), each with volume control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone output impedance:\u003c\/strong\u003e 1 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone power (unbalanced):\u003c\/strong\u003e 1 W @ 33 Ω, 600 mW @ 50 Ω, 420 mW @ 100 Ω, 200 mW @ 300 Ω, 120 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone power (balanced):\u003c\/strong\u003e 3 W @ 33 Ω, 2.8 W @ 50 Ω, 1.9 W @ 100 Ω, 850 mW @ 300 Ω, 460 mW @ 600 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrigger:\u003c\/strong\u003e 12 V on + off (mini-jack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e RC-7 (infrared)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 39.6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom color (individual high-gloss paint finish)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e SDA-1 NPM, power cable, RC-7 remote control, CR2032 battery, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the SDA-1 NPM and the standard SDA-1?\u003c\/h3\u003e\u003cp\u003eThe SDA-1 NPM already has the NPM-2 network streaming module built in from the factory – so it's a fully-fledged network player. The base SDA-1 only plays via USB, optical, coaxial and the analog input, and can be upgraded later. If you want to stream from day one, the NPM works out cheaper and simpler.\u003c\/p\u003e\u003ch3\u003eWhich streaming services and formats does it support?\u003c\/h3\u003e\u003cp\u003eIt's Roon Ready and brings Tidal and Spotify Connect, Qobuz, internet radio and LDAC Bluetooth over Wi-Fi or LAN. Via USB it handles PCM up to 32-bit\/384 kHz, DSD up to DSD256 and MQA; the optical and coaxial inputs accept PCM up to 24-bit\/192 kHz. Seven selectable PCM filters and four DSD filters fine-tune the sound.\u003c\/p\u003e\u003ch3\u003eDo I need a separate preamp for the SDA-1 NPM?\u003c\/h3\u003e\u003cp\u003eNo. It has a fully balanced, analog volume control and can drive a power amp directly with its variable output – the preamp is built in. If you want to run it as a pure source into an existing preamp, just set the output to a fixed level.\u003c\/p\u003e\u003ch3\u003eCan the headphone amplifier drive demanding headphones too?\u003c\/h3\u003e\u003cp\u003eYes. The balanced output delivers up to 3 W into 33 Ω, and still 850 mW into 300 Ω – enough for the vast majority of hi-fi headphones, including many planar magnetics. The output impedance is a low 1 Ω, and each output has its own discrete MOSFET amplifier with analog volume control.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the SDA-1 NPM available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request – so it fits your other components or your living space. Gato makes the custom color to order.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio SDA-1 NPM from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a streaming DAC in this class only truly comes into its own in the right setup – properly integrated into your network, configured fixed or variable, paired with the right power amp or active speakers and the right headphones. At our shop in Wädenswil, we set up Roon and the services, work out the right configuration for your system, and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003epower amplifiers\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279586058576,"sku":null,"price":5395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-sda-1-npm-dac-netzwerkplayer-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785899723"},{"product_id":"gatoaudiocdd1aebl","title":"Gato Audio CDD-1 AE CD Player \u0026 DAC, Black High Gloss","description":"\u003cp\u003eThe Gato Audio CDD-1 AE is a CD transport with a built-in D\/A converter from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt plays your CDs via a professional Philips CDpro2LF transport – and at the same time converts external digital sources such as computers or streamers to analog via USB and coaxial. Gato itself aptly calls it „a DAC with a transport“: a top-loader with a magnetic lid on top, and an analog needle display at the front that shows the remaining time during playback and the sample rate with digital sources. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio CDD-1 AE?\u003c\/h2\u003e\u003cp\u003eBecause it takes the CD as seriously as almost no other player does. The famous Philips CDpro2LF transport sits on a solid base milled from a single block of aluminum, resting vibration-decoupled on a Sorbothane tripod – mechanical interference stays outside. Conversion is handled by a dual-differential, dual-mono 24-bit DAC with a low-noise clock and asynchronous upsampling to 24-bit\/192 kHz; the asynchronous USB input accepts computers and streamers in a decoupled way. Via the coaxial digital output, you can also feed the transport into another converter. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA surprisingly analog, full-bodied sound – exactly the quality reviewers keep praising the CDD-1 for. With a 120 dB signal-to-noise ratio and 0.002% distortion, the background stays inky black and the presentation stays coherent and musical rather than technical. From CD it often sounds a touch more substantial and tactile than from the ripped file – a player that invites focused listening and still works as a high-quality DAC for your digital sources.\u003c\/p\u003e\u003ch3\u003eWho is the CDD-1 AE for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the CDD-1 AE is for anyone who listens to a large CD collection at reference level and also wants a first-class DAC for a computer or streamer – in one device. It's a pure source with a fixed output level, so it needs a preamp or integrated amplifier behind it; it doesn't replace a preamp. If you want a preamp built in, take a look at the SDA-1 or PRD-3S NPM instead. And if you no longer listen to CDs and only stream, you don't need the transport – a pure streaming DAC will do.\u003c\/p\u003e\u003ch3\u003eCan I connect external digital sources to the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. Via the asynchronous USB input and the coaxial S\/PDIF input, it processes signals up to 24-bit\/192 kHz – ideal for a computer, streamer or network player. In addition, a coaxial digital output passes the signal on to another converter. We're happy to discuss which connection best suits your sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish top-loader that celebrates the CD while also refining your digital sources as a fully-fledged 24\/192 DAC – analog in sound, uncompromising in construction, beautifully made. Want to know if the CDD-1 AE fits your chain? Tell us which amplifier and speakers you're running – we at HD Zürisee in Wädenswil will advise you on integration and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio CDD-1 AE\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e CD transport with built-in D\/A converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e Philips CDpro2LF, top-loader with magnetic lid; compatible with Red Book CD and CD-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e dual-differential, dual-mono, 24-bit; low-noise clock, asynchronous upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× coaxial (S\/PDIF, gold-plated RCA) + 1× USB Type B (asynchronous), up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output:\u003c\/strong\u003e 1× coaxial S\/PDIF (gold-plated RCA, 75 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair (unbalanced) + 1× XLR pair (Neutrik, balanced), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced \/ 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (± 0.2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e analog multi-function needle display (remaining time, or sample rate\/bit depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 37.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e CDD-1 AE, power cable, remote control, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the CDD-1 AE a CD player or a DAC?\u003c\/h3\u003e\u003cp\u003eBoth. It plays Red Book CDs and CD-Rs via the professional Philips CDpro2LF transport, and at the same time converts external digital sources via its USB and coaxial input up to 24-bit\/192 kHz. Gato itself describes it as a „DAC with a transport“.\u003c\/p\u003e\u003ch3\u003eDo I need an amplifier for the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. The CDD-1 AE is a pure source with a fixed output level – it has no volume control and no headphone output. You connect it to a preamp or integrated amplifier, unbalanced via RCA or balanced via XLR.\u003c\/p\u003e\u003ch3\u003eCan I connect a computer or streamer?\u003c\/h3\u003e\u003cp\u003eYes. The asynchronous USB input and the coaxial S\/PDIF input accept signals up to 24-bit\/192 kHz – turning the CDD-1 AE into a high-quality converter for a computer, streamer or network player. Via the coaxial digital output, the signal can also be passed on to another converter.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the CDD-1 AE available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request. Gato makes the lid to order, to match your other components or your living space.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio CDD-1 AE from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a player in this class only truly comes into its own in the right setup – with a matching amplifier, the right speakers and clean cabling, balanced or unbalanced. At our shop in Wädenswil, we work out the integration for your system and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279592710480,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-cdd-1-ae-cd-player-dac-schwarz-hochglanz-schraegansicht.jpg?v=1785899964"},{"product_id":"gatoaudiocdd1aewh","title":"Gato Audio CDD-1 AE CD Player \u0026 DAC, White High Gloss","description":"\u003cp\u003eThe Gato Audio CDD-1 AE is a CD transport with a built-in D\/A converter from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt plays your CDs via a professional Philips CDpro2LF transport – and at the same time converts external digital sources such as computers or streamers to analog via USB and coaxial. Gato itself aptly calls it „a DAC with a transport“: a top-loader with a magnetic lid on top, and an analog needle display at the front that shows the remaining time during playback and the sample rate with digital sources. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio CDD-1 AE?\u003c\/h2\u003e\u003cp\u003eBecause it takes the CD as seriously as almost no other player does. The famous Philips CDpro2LF transport sits on a solid base milled from a single block of aluminum, resting vibration-decoupled on a Sorbothane tripod – mechanical interference stays outside. Conversion is handled by a dual-differential, dual-mono 24-bit DAC with a low-noise clock and asynchronous upsampling to 24-bit\/192 kHz; the asynchronous USB input accepts computers and streamers in a decoupled way. Via the coaxial digital output, you can also feed the transport into another converter. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA surprisingly analog, full-bodied sound – exactly the quality reviewers keep praising the CDD-1 for. With a 120 dB signal-to-noise ratio and 0.002% distortion, the background stays inky black and the presentation stays coherent and musical rather than technical. From CD it often sounds a touch more substantial and tactile than from the ripped file – a player that invites focused listening and still works as a high-quality DAC for your digital sources.\u003c\/p\u003e\u003ch3\u003eWho is the CDD-1 AE for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the CDD-1 AE is for anyone who listens to a large CD collection at reference level and also wants a first-class DAC for a computer or streamer – in one device. It's a pure source with a fixed output level, so it needs a preamp or integrated amplifier behind it; it doesn't replace a preamp. If you want a preamp built in, take a look at the SDA-1 or PRD-3S NPM instead. And if you no longer listen to CDs and only stream, you don't need the transport – a pure streaming DAC will do.\u003c\/p\u003e\u003ch3\u003eCan I connect external digital sources to the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. Via the asynchronous USB input and the coaxial S\/PDIF input, it processes signals up to 24-bit\/192 kHz – ideal for a computer, streamer or network player. In addition, a coaxial digital output passes the signal on to another converter. We're happy to discuss which connection best suits your sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish top-loader that celebrates the CD while also refining your digital sources as a fully-fledged 24\/192 DAC – analog in sound, uncompromising in construction, beautifully made. Want to know if the CDD-1 AE fits your chain? Tell us which amplifier and speakers you're running – we at HD Zürisee in Wädenswil will advise you on integration and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio CDD-1 AE\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e CD transport with built-in D\/A converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e Philips CDpro2LF, top-loader with magnetic lid; compatible with Red Book CD and CD-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e dual-differential, dual-mono, 24-bit; low-noise clock, asynchronous upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× coaxial (S\/PDIF, gold-plated RCA) + 1× USB Type B (asynchronous), up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output:\u003c\/strong\u003e 1× coaxial S\/PDIF (gold-plated RCA, 75 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair (unbalanced) + 1× XLR pair (Neutrik, balanced), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced \/ 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (± 0.2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e analog multi-function needle display (remaining time, or sample rate\/bit depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 37.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e CDD-1 AE, power cable, remote control, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the CDD-1 AE a CD player or a DAC?\u003c\/h3\u003e\u003cp\u003eBoth. It plays Red Book CDs and CD-Rs via the professional Philips CDpro2LF transport, and at the same time converts external digital sources via its USB and coaxial input up to 24-bit\/192 kHz. Gato describes it itself as a DAC with a transport.\u003c\/p\u003e\u003ch3\u003eDo I need an amplifier for the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. The CDD-1 AE is a pure source with a fixed output level – it has no volume control and no headphone output. You connect it to a preamp or integrated amplifier, unbalanced via RCA or balanced via XLR.\u003c\/p\u003e\u003ch3\u003eCan I connect a computer or streamer?\u003c\/h3\u003e\u003cp\u003eYes. The asynchronous USB input and the coaxial S\/PDIF input accept signals up to 24-bit\/192 kHz – turning the CDD-1 AE into a high-quality converter for a computer, streamer or network player. Via the coaxial digital output, the signal can also be passed on to another converter.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the CDD-1 AE available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request. Gato makes the lid to order, to match your other components or your living space.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio CDD-1 AE from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a player in this class only truly comes into its own in the right setup – with a matching amplifier, the right speakers and clean cabling, balanced or unbalanced. At our shop in Wädenswil, we work out the integration for your system and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279594512720,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-cdd-1-ae-cd-player-dac-weiss-hochglanz-schraegansicht.jpg?v=1785899964"},{"product_id":"gatoaudiocdd1aewn","title":"Gato Audio CDD-1 AE CD Player \u0026 DAC, Walnut High Gloss","description":"\u003cp\u003eThe Gato Audio CDD-1 AE is a CD transport with a built-in D\/A converter from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt plays your CDs via a professional Philips CDpro2LF transport – and at the same time converts external digital sources such as computers or streamers to analog via USB and coaxial. Gato itself aptly calls it „a DAC with a transport“: a top-loader with a magnetic lid on top, and an analog needle display at the front that shows the remaining time during playback and the sample rate with digital sources. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio CDD-1 AE?\u003c\/h2\u003e\u003cp\u003eBecause it takes the CD as seriously as almost no other player does. The famous Philips CDpro2LF transport sits on a solid base milled from a single block of aluminum, resting vibration-decoupled on a Sorbothane tripod – mechanical interference stays outside. Conversion is handled by a dual-differential, dual-mono 24-bit DAC with a low-noise clock and asynchronous upsampling to 24-bit\/192 kHz; the asynchronous USB input accepts computers and streamers in a decoupled way. Via the coaxial digital output, you can also feed the transport into another converter. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA surprisingly analog, full-bodied sound – exactly the quality reviewers keep praising the CDD-1 for. With a 120 dB signal-to-noise ratio and 0.002% distortion, the background stays inky black and the presentation stays coherent and musical rather than technical. From CD it often sounds a touch more substantial and tactile than from the ripped file – a player that invites focused listening and still works as a high-quality DAC for your digital sources.\u003c\/p\u003e\u003ch3\u003eWho is the CDD-1 AE for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the CDD-1 AE is for anyone who listens to a large CD collection at reference level and also wants a first-class DAC for a computer or streamer – in one device. It's a pure source with a fixed output level, so it needs a preamp or integrated amplifier behind it; it doesn't replace a preamp. If you want a preamp built in, take a look at the SDA-1 or PRD-3S NPM instead. And if you no longer listen to CDs and only stream, you don't need the transport – a pure streaming DAC will do.\u003c\/p\u003e\u003ch3\u003eCan I connect external digital sources to the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. Via the asynchronous USB input and the coaxial S\/PDIF input, it processes signals up to 24-bit\/192 kHz – ideal for a computer, streamer or network player. In addition, a coaxial digital output passes the signal on to another converter. We're happy to discuss which connection best suits your sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish top-loader that celebrates the CD while also refining your digital sources as a fully-fledged 24\/192 DAC – analog in sound, uncompromising in construction, beautifully made. Want to know if the CDD-1 AE fits your chain? Tell us which amplifier and speakers you're running – we at HD Zürisee in Wädenswil will advise you on integration and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio CDD-1 AE\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e CD transport with built-in D\/A converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e Philips CDpro2LF, top-loader with magnetic lid; compatible with Red Book CD and CD-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e dual-differential, dual-mono, 24-bit; low-noise clock, asynchronous upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× coaxial (S\/PDIF, gold-plated RCA) + 1× USB Type B (asynchronous), up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output:\u003c\/strong\u003e 1× coaxial S\/PDIF (gold-plated RCA, 75 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair (unbalanced) + 1× XLR pair (Neutrik, balanced), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced \/ 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (± 0.2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e analog multi-function needle display (remaining time, or sample rate\/bit depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 37.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut High Gloss (real wood veneer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e CDD-1 AE, power cable, remote control, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the CDD-1 AE a CD player or a DAC?\u003c\/h3\u003e\u003cp\u003eBoth. It plays Red Book CDs and CD-Rs via the professional Philips CDpro2LF transport, and at the same time converts external digital sources via its USB and coaxial input up to 24-bit\/192 kHz. Gato describes it itself as a DAC with a transport.\u003c\/p\u003e\u003ch3\u003eDo I need an amplifier for the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. The CDD-1 AE is a pure source with a fixed output level – it has no volume control and no headphone output. You connect it to a preamp or integrated amplifier, unbalanced via RCA or balanced via XLR.\u003c\/p\u003e\u003ch3\u003eCan I connect a computer or streamer?\u003c\/h3\u003e\u003cp\u003eYes. The asynchronous USB input and the coaxial S\/PDIF input accept signals up to 24-bit\/192 kHz – turning the CDD-1 AE into a high-quality converter for a computer, streamer or network player. Via the coaxial digital output, the signal can also be passed on to another converter.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the CDD-1 AE available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request. Gato makes the lid to order, to match your other components or your living space.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio CDD-1 AE from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a player in this class only truly comes into its own in the right setup – with a matching amplifier, the right speakers and clean cabling, balanced or unbalanced. At our shop in Wädenswil, we work out the integration for your system and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279596183888,"sku":null,"price":4995.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-cdd-1-ae-cd-player-dac-nussbaum-hochglanz-schraegansicht.jpg?v=1785899965"},{"product_id":"gatoaudiocdd1aecu","title":"Gato Audio CDD-1 AE CD Player \u0026 DAC, Custom Color High Gloss","description":"\u003cp\u003eThe Gato Audio CDD-1 AE is a CD transport with a built-in D\/A converter from the Danish manufacturer Gato Audio.\u003c\/p\u003e\u003cp\u003eIt plays your CDs via a professional Philips CDpro2LF transport – and at the same time converts external digital sources such as computers or streamers to analog via USB and coaxial. Gato itself aptly calls it „a DAC with a transport“: a top-loader with a magnetic lid on top, and an analog needle display at the front that shows the remaining time during playback and the sample rate with digital sources. Supplied as a single unit.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio CDD-1 AE?\u003c\/h2\u003e\u003cp\u003eBecause it takes the CD as seriously as almost no other player does. The famous Philips CDpro2LF transport sits on a solid base milled from a single block of aluminum, resting vibration-decoupled on a Sorbothane tripod – mechanical interference stays outside. Conversion is handled by a dual-differential, dual-mono 24-bit DAC with a low-noise clock and asynchronous upsampling to 24-bit\/192 kHz; the asynchronous USB input accepts computers and streamers in a decoupled way. Via the coaxial digital output, you can also feed the transport into another converter. Designed and built in Copenhagen.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eA surprisingly analog, full-bodied sound – exactly the quality reviewers keep praising the CDD-1 for. With a 120 dB signal-to-noise ratio and 0.002% distortion, the background stays inky black and the presentation stays coherent and musical rather than technical. From CD it often sounds a touch more substantial and tactile than from the ripped file – a player that invites focused listening and still works as a high-quality DAC for your digital sources.\u003c\/p\u003e\u003ch3\u003eWho is the CDD-1 AE for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the CDD-1 AE is for anyone who listens to a large CD collection at reference level and also wants a first-class DAC for a computer or streamer – in one device. It's a pure source with a fixed output level, so it needs a preamp or integrated amplifier behind it; it doesn't replace a preamp. If you want a preamp built in, take a look at the SDA-1 or PRD-3S NPM instead. And if you no longer listen to CDs and only stream, you don't need the transport – a pure streaming DAC will do.\u003c\/p\u003e\u003ch3\u003eCan I connect external digital sources to the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. Via the asynchronous USB input and the coaxial S\/PDIF input, it processes signals up to 24-bit\/192 kHz – ideal for a computer, streamer or network player. In addition, a coaxial digital output passes the signal on to another converter. We're happy to discuss which connection best suits your sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA Danish top-loader that celebrates the CD while also refining your digital sources as a fully-fledged 24\/192 DAC – analog in sound, uncompromising in construction, beautifully made. Want to know if the CDD-1 AE fits your chain? Tell us which amplifier and speakers you're running – we at HD Zürisee in Wädenswil will advise you on integration and set it up properly during installation.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio CDD-1 AE\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e CD transport with built-in D\/A converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransport:\u003c\/strong\u003e Philips CDpro2LF, top-loader with magnetic lid; compatible with Red Book CD and CD-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\/A converter:\u003c\/strong\u003e dual-differential, dual-mono, 24-bit; low-noise clock, asynchronous upsampling to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital inputs:\u003c\/strong\u003e 1× coaxial (S\/PDIF, gold-plated RCA) + 1× USB Type B (asynchronous), up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output:\u003c\/strong\u003e 1× coaxial S\/PDIF (gold-plated RCA, 75 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog outputs:\u003c\/strong\u003e 1× RCA pair (unbalanced) + 1× XLR pair (Neutrik, balanced), gold-plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e 2.2 V unbalanced \/ 4.4 V balanced (fixed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced \/ 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz (± 0.2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion (THD+N):\u003c\/strong\u003e 0.002%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e analog multi-function needle display (remaining time, or sample rate\/bit depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 115\/230 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e standby \u0026lt; 1 W, idle 30 W, max. 60 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 32.5 × 10.5 × 37.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Custom color (individual high-gloss paint finish)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e CDD-1 AE, power cable, remote control, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the CDD-1 AE a CD player or a DAC?\u003c\/h3\u003e\u003cp\u003eBoth. It plays Red Book CDs and CD-Rs via the professional Philips CDpro2LF transport, and at the same time converts external digital sources via its USB and coaxial input up to 24-bit\/192 kHz. Gato describes it itself as a DAC with a transport.\u003c\/p\u003e\u003ch3\u003eDo I need an amplifier for the CDD-1 AE?\u003c\/h3\u003e\u003cp\u003eYes. The CDD-1 AE is a pure source with a fixed output level – it has no volume control and no headphone output. You connect it to a preamp or integrated amplifier, unbalanced via RCA or balanced via XLR.\u003c\/p\u003e\u003ch3\u003eCan I connect a computer or streamer?\u003c\/h3\u003e\u003cp\u003eYes. The asynchronous USB input and the coaxial S\/PDIF input accept signals up to 24-bit\/192 kHz – turning the CDD-1 AE into a high-quality converter for a computer, streamer or network player. Via the coaxial digital output, the signal can also be passed on to another converter.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the CDD-1 AE available in?\u003c\/h3\u003e\u003cp\u003eIn Black, White and Walnut (real wood veneer), each with a high-gloss lid, plus a custom paint finish (Wunschfarbe) on request. Gato makes the lid to order, to match your other components or your living space.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio CDD-1 AE from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a player in this class only truly comes into its own in the right setup – with a matching amplifier, the right speakers and clean cabling, balanced or unbalanced. At our shop in Wädenswil, we work out the integration for your system and install it with our own technician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, high-quality \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Default Title","offer_id":53279599821136,"sku":null,"price":5395.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-cdd-1-ae-cd-player-dac-wunschfarbe-hochglanz-schraegansicht.jpg?v=1785899960"},{"product_id":"gatoaudiofm8bl","title":"Gato Audio FM-8 Bookshelf Speaker, Black High Gloss (Pair)","description":"\u003cp\u003eThe Gato Audio FM-8 is a passive 2-way bookshelf speaker that packs the full sound of a large speaker into a deliberately compact cabinet.\u003c\/p\u003e\u003cp\u003eWith just 8 liters of internal volume and 30 cm of height, it sits on a shelf, a sideboard or a TV cabinet – and delivers the intimacy, precision and coherent soundstage that small two-way speakers are famous for. Two purpose-built drivers, a FusedMASS cabinet and Gato's own PurePHASE crossover turn the smallest member of the FM series into a full-fledged high-ender. Supplied as a pair, in the current, 2021-revised version.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio FM-8?\u003c\/h2\u003e\u003cp\u003eBecause nothing here is off the shelf. Gato develops the drivers itself, together with Danish transducer specialists: a 38 mm ring radiator tweeter with a powerful ferrite motor, and a 150 mm mid\/woofer with a mineral-fiber cone and low-loss suspension. The FusedMASS cabinet consists of several bonded material layers with a damping layer and heavy internal bracing – that calms resonances rather than simply piling on mass. The PurePHASE crossover doesn't just separate the frequencies cleanly, it also ensures correct phase alignment, low group delay and wide dispersion. On top of that comes lossless voicing: you gently adjust the sound to your room, your amplifier and your taste – without losing any detail in the process. Developed and built in Copenhagen.\u003c\/p\u003e\u003ch3\u003eThe revised FM series\u003c\/h3\u003e\u003cp\u003eYou get the current series, which Gato fundamentally revised in 2021: new cabinet manufacturing with better fit and finish, improved metal parts, crossovers with high-quality components from Jantzen Audio, assembled in-house on double-sided fiberglass boards and measured with Audio Precision equipment, plus newly developed gold-plated terminals with a firmer grip. This revision also brought the matte Satin Black finish and the choice between a black or silver trim ring.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eSurprisingly full-bodied for its size. The FM-8 plays rich and intimate at the same time, with a precise, tangible soundstage and voices that stand free in the room rather than sticking to the speaker cabinets. It resolves finely, yet stays musical rather than analytical – the classic trick of a well-tuned small two-way. The magnetically attached fabric covers are built to color the sound as little as possible; the trim ring around the drivers comes in silver (standard) or, for an extra charge, in black, to match your front baffle.\u003c\/p\u003e\u003ch3\u003eWho is the FM-8 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the FM-8 is for anyone who wants genuine high-end sound in a small to medium-sized room, without two floorstanders taking up the corner. It blossoms on an amplifier with some headroom to spare – with 85 dB efficiency and a 4-ohm load, it likes power (Gato recommends 50 to 200 watts). If you want to fill a large space or want deep home-cinema bass, you'd rather go for the FM-15, a floorstander from the series, or add a subwoofer – the FM-8 is a precision tool, not an earthquake generator.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe smallest Gato is anything but a compromise: a handcrafted two-way speaker with its own drivers, a clever cabinet and an adjustable crossover, delivering big performance in small rooms. Not sure whether the FM-8 fits your amplifier and your room? Tell us about your setup – we at HD Zürisee in Wädenswil will advise you on placement, amplifier matching and trim ring choice, and set the speakers up at your home if you like.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio FM-8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e passive 2-way bookshelf speaker (bass reflex)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 38 mm ring radiator, ferrite motor, optimized chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid\/woofer:\u003c\/strong\u003e 150 mm mineral-fiber cone, low-loss suspension, shorting rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45 Hz – 35 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V):\u003c\/strong\u003e 85 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 50 – 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e PurePHASE with lossless voicing, components from Jantzen Audio, double-sided fiberglass board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e FusedMASS multi-layer laminate, 8 liters internal volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e gold-plated bi-wire terminals (banana plug \/ 4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim ring:\u003c\/strong\u003e silver (standard) or black (extra charge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 18 × 30 × 26 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 1 pair of FM-8, magnetic fabric covers, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat room size suits the FM-8?\u003c\/h3\u003e\u003cp\u003eFor small to medium-sized rooms. With 8 liters of volume and 30 cm of height, the FM-8 is designed for near-field listening and typical living rooms, where it draws a surprisingly large, precise soundstage. In very large rooms, or for deep home-cinema bass, you're better off pairing it with a subwoofer or choosing a larger FM model.\u003c\/p\u003e\u003ch3\u003eWhat amplifier does the FM-8 need?\u003c\/h3\u003e\u003cp\u003eOne with some power in reserve. The FM-8 has a 4-ohm impedance and 85 dB efficiency; Gato recommends 50 to 200 watts. A powerful integrated amplifier drives it confidently and lets it play dynamically – we're happy to help you find the right match.\u003c\/p\u003e\u003ch3\u003eCan I adjust the sound to my room?\u003c\/h3\u003e\u003cp\u003eYes. The FM series offers lossless crossover voicing: you can gently tune the sound to your room, your amplifier and your taste, without losing any detail. That way, the FM-8 sits cleanly even in acoustically difficult rooms.\u003c\/p\u003e\u003ch3\u003eWhat changed with the 2021 FM update?\u003c\/h3\u003e\u003cp\u003eGato overhauled cabinet manufacturing – better fit and finish, improved metal parts – and retuned the crossovers with components from Jantzen Audio, assembled and measured in-house. New gold-plated terminals, the matte Satin Black finish and the choice between a black or silver trim ring were added too. We supply this current version.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the FM-8 available in?\u003c\/h3\u003e\u003cp\u003eIn Black High Gloss, White High Gloss and Walnut High Gloss (real wood veneer), as well as matte Satin Black. You choose the trim ring around the drivers in silver (standard) or, for an extra charge, in black. That way the FM-8 fits your furniture and your other components.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio FM-8 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a speaker only shows what it can do in the right room, paired with the right electronics. At our shop in Wädenswil, we advise you on placement, amplifier matching and trim ring choice, deliver the pair and set it up with our own technician at your home – drawing on years of experience with high-end audio in living spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, sturdy \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Silber","offer_id":53279697011024,"sku":null,"price":1495.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz","offer_id":53279697043792,"sku":null,"price":1595.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-fm-8-regallautsprecher-schwarz-hochglanz-schraegansicht.png?v=1785900182"},{"product_id":"gatoaudiofm8wh","title":"Gato Audio FM-8 Bookshelf Speaker, White High Gloss (Pair)","description":"\u003cp\u003eThe Gato Audio FM-8 is a passive 2-way bookshelf speaker that packs the full sound of a large speaker into a deliberately compact cabinet.\u003c\/p\u003e\u003cp\u003eWith just 8 liters of internal volume and 30 cm of height, it sits on a shelf, a sideboard or a TV cabinet – and delivers the intimacy, precision and coherent soundstage that small two-way speakers are famous for. Two purpose-built drivers, a FusedMASS cabinet and Gato's own PurePHASE crossover turn the smallest member of the FM series into a full-fledged high-ender. Supplied as a pair, in the current, 2021-revised version.\u003c\/p\u003e\u003ch2\u003eWhy the Gato Audio FM-8?\u003c\/h2\u003e\u003cp\u003eBecause nothing here is off the shelf. Gato develops the drivers itself, together with Danish transducer specialists: a 38 mm ring radiator tweeter with a powerful ferrite motor, and a 150 mm mid\/woofer with a mineral-fiber cone and low-loss suspension. The FusedMASS cabinet consists of several bonded material layers with a damping layer and heavy internal bracing – that calms resonances rather than simply piling on mass. The PurePHASE crossover doesn't just separate the frequencies cleanly, it also ensures correct phase alignment, low group delay and wide dispersion. On top of that comes lossless voicing: you gently adjust the sound to your room, your amplifier and your taste – without losing any detail in the process. Developed and built in Copenhagen.\u003c\/p\u003e\u003ch3\u003eThe revised FM series\u003c\/h3\u003e\u003cp\u003eYou get the current series, which Gato fundamentally revised in 2021: new cabinet manufacturing with better fit and finish, improved metal parts, crossovers with high-quality components from Jantzen Audio, assembled in-house on double-sided fiberglass boards and measured with Audio Precision equipment, plus newly developed gold-plated terminals with a firmer grip. This revision also brought the matte Satin Black finish and the choice between a black or silver trim ring.\u003c\/p\u003e\u003ch2\u003eWhat you'll hear\u003c\/h2\u003e\u003cp\u003eSurprisingly full-bodied for its size. The FM-8 plays rich and intimate at the same time, with a precise, tangible soundstage and voices that stand free in the room rather than sticking to the speaker cabinets. It resolves finely, yet stays musical rather than analytical – the classic trick of a well-tuned small two-way. The magnetically attached fabric covers are built to color the sound as little as possible; the trim ring around the drivers comes in silver (standard) or, for an extra charge, in black, to match your front baffle.\u003c\/p\u003e\u003ch3\u003eWho is the FM-8 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003ePlainly put: the FM-8 is for anyone who wants genuine high-end sound in a small to medium-sized room, without two floorstanders taking up the corner. It blossoms on an amplifier with some headroom to spare – with 85 dB efficiency and a 4-ohm load, it likes power (Gato recommends 50 to 200 watts). If you want to fill a large space or want deep home-cinema bass, you'd rather go for the FM-15, a floorstander from the series, or add a subwoofer – the FM-8 is a precision tool, not an earthquake generator.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe smallest Gato is anything but a compromise: a handcrafted two-way speaker with its own drivers, a clever cabinet and an adjustable crossover, delivering big performance in small rooms. Not sure whether the FM-8 fits your amplifier and your room? Tell us about your setup – we at HD Zürisee in Wädenswil will advise you on placement, amplifier matching and trim ring choice, and set the speakers up at your home if you like.\u003c\/p\u003e\u003ch2\u003eTechnical data – Gato Audio FM-8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e passive 2-way bookshelf speaker (bass reflex)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 38 mm ring radiator, ferrite motor, optimized chamber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid\/woofer:\u003c\/strong\u003e 150 mm mineral-fiber cone, low-loss suspension, shorting rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45 Hz – 35 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V):\u003c\/strong\u003e 85 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 50 – 200 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e PurePHASE with lossless voicing, components from Jantzen Audio, double-sided fiberglass board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e FusedMASS multi-layer laminate, 8 liters internal volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e gold-plated bi-wire terminals (banana plug \/ 4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim ring:\u003c\/strong\u003e silver (standard) or black (extra charge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 18 × 30 × 26 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e designed and built in Copenhagen, Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 1 pair of FM-8, magnetic fabric covers, manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat room size suits the FM-8?\u003c\/h3\u003e\u003cp\u003eFor small to medium-sized rooms. With 8 liters of volume and 30 cm of height, the FM-8 is designed for near-field listening and typical living rooms, where it draws a surprisingly large, precise soundstage. In very large rooms, or for deep home-cinema bass, you're better off pairing it with a subwoofer or choosing a larger FM model.\u003c\/p\u003e\u003ch3\u003eWhat amplifier does the FM-8 need?\u003c\/h3\u003e\u003cp\u003eOne with some power in reserve. The FM-8 has a 4-ohm impedance and 85 dB efficiency; Gato recommends 50 to 200 watts. A powerful integrated amplifier drives it confidently and lets it play dynamically – we're happy to help you find the right match.\u003c\/p\u003e\u003ch3\u003eCan I adjust the sound to my room?\u003c\/h3\u003e\u003cp\u003eYes. The FM series offers lossless crossover voicing: you can gently tune the sound to your room, your amplifier and your taste, without losing any detail. That way, the FM-8 sits cleanly even in acoustically difficult rooms.\u003c\/p\u003e\u003ch3\u003eWhat changed with the 2021 FM update?\u003c\/h3\u003e\u003cp\u003eGato overhauled cabinet manufacturing – better fit and finish, improved metal parts – and retuned the crossovers with components from Jantzen Audio, assembled and measured in-house. New gold-plated terminals, the matte Satin Black finish and the choice between a black or silver trim ring were added too. We supply this current version.\u003c\/p\u003e\u003ch3\u003eWhat finishes is the FM-8 available in?\u003c\/h3\u003e\u003cp\u003eIn Black High Gloss, White High Gloss and Walnut High Gloss (real wood veneer), as well as matte Satin Black. You choose the trim ring around the drivers in silver (standard) or, for an extra charge, in black. That way the FM-8 fits your furniture and your other components.\u003c\/p\u003e\u003ch3\u003eWhy buy the Gato Audio FM-8 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a speaker only shows what it can do in the right room, paired with the right electronics. At our shop in Wädenswil, we advise you on placement, amplifier matching and trim ring choice, deliver the pair and set it up with our own technician at your home – drawing on years of experience with high-end audio in living spaces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs well with:\u003c\/strong\u003e a matching \u003ca href=\"\/en\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e, sturdy \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e and the right \u003ca href=\"\/en\/collections\/kabel\"\u003ecables\u003c\/a\u003e to connect them.\u003c\/p\u003e","brand":"Gato Audio","offers":[{"title":"Silber","offer_id":53279697240400,"sku":null,"price":1495.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz","offer_id":53279697273168,"sku":null,"price":1595.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gato-audio-fm-8-regallautsprecher-weiss-hochglanz-schraegansicht.png?v=1785900209"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/collections\/gato-audio-amp-150-ae-vollverstaerker-hochglanz-schraegansicht-kollektion.jpg?v=1788946132","url":"https:\/\/hdzuerisee.ch\/en\/collections\/gato-audio.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}