{"title":"Decoupling","description":"\u003cp\u003eDecoupling structurally separates speakers, turntables and sensitive electronics from the floor or the rack, so vibrations don't travel back into the sound unfiltered. That sounds like a fussy detail – but it's simple physics: any enclosure that resonates along blurs bass and timing to some extent.\u003c\/p\u003e\u003cp\u003eAt HD Zürisee you'll find decoupling feet, absorbers and spike shoes from Bassocontinuo, CR-Tech, bFly-Audio, ViaBlue and IsoTek – from an affordable adhesive adapter to a premium set for heavy floorstanding speakers. The right choice depends on the weight of the device, the surface (parquet, carpet, rack floor) and your budget. Decoupling pays off especially for turntables: less rumble, a clearer picture in the lower registers. On very rigid, already well-placed racks, the difference is more subtle – honestly.\u003c\/p\u003e\u003cp\u003eNot sure which model suits your device and its weight? Call us, message on WhatsApp or come in for advice in Wädenswil – we'll tell you which solution is worth it and which would be more cosmetic. Goes well with this: \u003ca href=\"\/en\/collections\/netzleisten-verteiler\"\u003epower strips \u0026 distributors\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"crtech5035","title":"CR-Tech Sound Supports 5035, Set of 4","description":"\u003cp\u003eThe CR-Tech Sound Supports 5035 are decoupling feet with an M6 thread that separate medium-heavy speakers from the floor via a two-stage damping system. You get them here as a set of 4 – enough to equip exactly one speaker with four contact points.\u003c\/p\u003e\u003cp\u003eDeveloped and made by crTech in Switzerland, as a further development of the flatter 5023. 50 mm diameter, 35 mm height, M6 internal thread: you screw them in place of the original feet or spikes. If your speaker has a different thread, matching adapters are available.\u003c\/p\u003e\u003ch2\u003eWhy the Sound Supports 5035?\u003c\/h2\u003e\u003cp\u003eA speaker that's working pushes energy into its footprint. A hard-coupled floor happily absorbs that energy and gives it back, delayed and diffuse – your parquet then plays quietly along, uninvited. The two-stage system in the 5035 stops exactly that: vertical forces never make it into the floor at all, horizontal ones are dissipated in a controlled way.\u003c\/p\u003e\u003cp\u003eCompared with the flatter 5023, the 5035 has more height and therefore more damping travel. It's designed for medium-heavy speakers: the manufacturer's chart names a range of roughly 20 to 60 kg, distribution specifies a load capacity of up to 80 kg per foot.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eThe bass stands out first. It becomes drier and more defined, because the floor's ringing sustain is missing. Then you notice it in the midrange: voices stand more calmly, instruments keep their edges. No effects box, no big aha moment – just the feeling that someone tidied up the room.\u003c\/p\u003e\u003ch3\u003eWho are the Sound Supports 5035 suited for – and who aren't they for?\u003c\/h3\u003e\u003cp\u003eFor medium-heavy floorstanding speakers with an M6 threaded hole, especially on hard floors – concrete, screed, tile, floating parquet. That's where direct coupling shows its worst, and that's where the gain is greatest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e under truly heavy speakers beyond 60 kg, the 5035 is undersized – that's where the larger 6540 with M8 thread belongs. Under light bookshelf speakers, turntables or electronics it's overkill in the other direction – that's what the 5023 and 5017 are for. And if you haven't got placement and room under control yet, that's where you get more sound for less effort. Decoupling is fine-tuning, not the foundation.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe sweet spot of the range. Enough headroom for full-size floorstanders without having to reach straight for the big 6540 – and with the 4-piece set, one speaker is fully equipped, which makes the maths pleasantly simple: one pair of speakers, two sets. Which size suits your model and your floor construction, we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: threaded decoupling feet for medium-heavy speakers\u003c\/li\u003e\n\u003cli\u003eDiameter: 50 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 35 mm\u003c\/li\u003e\n\u003cli\u003eThread: M6 (internal); thread adapters to other sizes available\u003c\/li\u003e\n\u003cli\u003eApplication range: medium-heavy speakers, roughly 20–60 kg (manufacturer's data)\u003c\/li\u003e\n\u003cli\u003eLoad capacity: up to 80 kg per foot (distributor's data)\u003c\/li\u003e\n\u003cli\u003eConstruction: two-stage damping system – prevents vertical force transfer into the floor, dissipates horizontal forces in a controlled way\u003c\/li\u003e\n\u003cli\u003eMounting: screws in place of existing feet or spikes\u003c\/li\u003e\n\u003cli\u003eColour: Black (only version; silver is available only for the 5017 and 5023)\u003c\/li\u003e\n\u003cli\u003eOrigin: developed and manufactured in Switzerland\u003c\/li\u003e\n\u003cli\u003eIncluded: set of 4 – equips one speaker with four contact points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many Sound Supports 5035 do I need?\u003c\/h3\u003e\u003cp\u003eA 4-piece set equips one speaker with four contact points. For a pair of floorstanders you therefore need two sets. If your speaker has only three threaded holes, one foot is left over. Tell us your model and we'll work out the quantity together beforehand – so you order neither too few nor too many.\u003c\/p\u003e\u003ch3\u003eWhat speakers is the 5035 made for?\u003c\/h3\u003e\u003cp\u003eFor medium-heavy speakers. The manufacturer names a range of roughly 20 to 60 kilograms, the distributor gives a load capacity of up to 80 kilograms per foot. Above that, the larger 6540 with M8 thread takes over; below it, the 5023 or 5017 are entirely sufficient for light speakers and devices.\u003c\/p\u003e\u003ch3\u003eWhat if my speakers don't have an M6 thread?\u003c\/h3\u003e\u003cp\u003eThen you need a thread adapter. The 5035 has an M6 internal thread and is screwed in place of the original feet or spikes; for different thread sizes, crTech offers matching adapters. Tell us what connection your speaker has and we'll get you the right part along with it.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Sound Supports 5035 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause size, thread and quantity decide the effect – and that's better clarified beforehand than afterwards. Our experienced team in Wädenswil matches the feet to your speakers and your floor construction, sources the adapter if needed, and delivers across Switzerland. Call us at 044 680 22 00 or write via WhatsApp to \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe 5035 shows its strength under medium-heavy speakers – browse our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e for those. If your connection isn't M6, or you want to work through the whole range, you'll find both in the \u003ca href=\"\/en\/collections\/cr-tech\"\u003eCR-TECH range\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"Default Title","offer_id":53129360376144,"sku":null,"price":700.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-5035-entkopplungsfuss-m6-lautsprecher-frontansicht.png?v=1785846662"},{"product_id":"crtech6540","title":"CR-Tech Sound Supports 6540, Set of 2","description":"\u003cp\u003eThe CR-Tech Sound Supports 6540 are decoupling feet with an M8 thread for heavy speakers from roughly 40 kilograms upwards. They're the largest model in the Sound Supports range and are supplied here as a set of 2.\u003c\/p\u003e\u003cp\u003e65 mm diameter, 40 mm height, M8 internal thread: noticeably more foundation than the 5035 – and that's exactly the point. The 6540 is developed and made by crTech in Switzerland. It's screwed in place of the original feet or spikes; adapters are available for different thread sizes.\u003c\/p\u003e\u003ch2\u003eWhy the Sound Supports 6540?\u003c\/h2\u003e\u003cp\u003eThe more cone area a speaker moves, and the more mass it has to stabilise while doing it, the more residual energy looks for a way down. If it finds a hard floor, that floor becomes a second, uninvited membrane. The two-stage damping system in the 6540 doesn't let vertical forces through at all and dissipates horizontal ones in a controlled way – at a load capacity the distributor specifies as up to 120 kilograms per foot.\u003c\/p\u003e\u003cp\u003eThe M8 thread isn't a marginal detail here: you don't hang an 80-kilo speaker on M6. Where the 5035 is made for medium-heavy speakers, that's exactly where the 6540's territory begins.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eThe 6540 works most clearly in the deep bass: it becomes more tangible and stops wobbling, because the ground underneath no longer joins in. Above that, the sound picture becomes calmer – large-scale music keeps its order even when it gets loud. The speaker feels less like a piece of furniture that makes music and more like a point in the room the music comes from.\u003c\/p\u003e\u003ch3\u003eWho are the Sound Supports 6540 suited for – and who aren't they for?\u003c\/h3\u003e\u003cp\u003eFor large, heavy floorstanding speakers with an M8 connection – the class where it takes two people to set them up. On solid floors, screed and tile, the payoff is greatest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e under medium-heavy speakers, the 6540 is simply too much foot – that's what the 5035 is built for, and it's the better fit there. More importantly: one set contains two feet. A speaker with four contact points therefore needs two sets, a pair of speakers accordingly four. Work that out before you order – or let us do it.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe heavyweight of the range, and that's meant literally: 65 mm diameter, M8 thread, load capacity up to 120 kilograms. Under a truly large speaker, this isn't an accessory anymore, it's structural engineering with intent. Only the sales unit needs your attention – a set of 2 is half a speaker's worth. Tell us at HD Zürisee in Wädenswil which speakers you have, and the right quantity is settled before you order.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: threaded decoupling feet for large, heavy speakers\u003c\/li\u003e\n\u003cli\u003eDiameter: 65 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 40 mm\u003c\/li\u003e\n\u003cli\u003eThread: M8 (internal); thread adapters to other sizes available\u003c\/li\u003e\n\u003cli\u003eApplication range: heavy speakers from roughly 40 kg (manufacturer's data)\u003c\/li\u003e\n\u003cli\u003eLoad capacity: up to 120 kg per foot (distributor's data)\u003c\/li\u003e\n\u003cli\u003eConstruction: two-stage damping system – prevents vertical force transfer into the floor, dissipates horizontal forces in a controlled way\u003c\/li\u003e\n\u003cli\u003eMounting: screws in place of existing feet or spikes\u003c\/li\u003e\n\u003cli\u003eColour: Black (only version)\u003c\/li\u003e\n\u003cli\u003eOrigin: developed and manufactured in Switzerland\u003c\/li\u003e\n\u003cli\u003eIncluded: set of 2 – for a speaker with four contact points, two sets are needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many Sound Supports 6540 do I need?\u003c\/h3\u003e\u003cp\u003eOne set contains two feet. A speaker with four contact points therefore needs two sets, a pair of floorstanders accordingly four. With three contact points, it depends on the construction. Tell us your speaker model and we'll work out the quantity before you order.\u003c\/p\u003e\u003ch3\u003eFrom what speaker weight does the 6540 make sense?\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies it for heavy speakers from roughly 40 kilograms, the distributor gives a load capacity of up to 120 kilograms per foot. Below that, the 5035 is enough for medium-heavy speakers. In the borderline range, the floor construction matters more than the datasheet – ask us if in doubt.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the 6540 and the 5035?\u003c\/h3\u003e\u003cp\u003eSize, thread and headroom. The 6540 measures 65 mm in diameter at 40 mm height and carries an M8 thread, the 5035 comes in at 50 mm at 35 mm height with M6. The two-stage damping principle is identical on both, as is the black finish.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Sound Supports 6540 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause with heavy speakers, connection and quantity need to be right beforehand – a miscalculated set only shows itself once you unpack. We at HD Zürisee sort that out with you on the phone, source the thread adapter if needed, and deliver across Switzerland. Reach us at 044 680 22 00, via WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or via shop@hdzuerisee.ch.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eBig speakers first, feet after: browse our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e. The smaller sibling model and the adapters are in the \u003ca href=\"\/en\/collections\/cr-tech\"\u003eCR-TECH range\u003c\/a\u003e – and if the floor isn't the only issue in the room, it's worth a look at our \u003ca href=\"\/en\/collections\/akustik\"\u003eacoustic solutions\u003c\/a\u003e.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"Default Title","offer_id":53129360605520,"sku":null,"price":550.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-6540-entkopplungsfuss-m8-lautsprecher-frontansicht.png?v=1785846685"},{"product_id":"crtechklebeadapterm6","title":"CR-Tech Sound Supports Adhesive Adapter M6, Set of 4","description":"\u003cp\u003eThe CR-Tech Adhesive Adapter M6 is a self-adhesive metal disc with an M6 threaded stud that turns a device with no threaded hole into a mounting point for CR-Tech Sound Supports.\u003c\/p\u003e\u003cp\u003eMany hi-fi components simply have no threads prepared for decoupling feet. The adhesive adapter creates that point: stick the disc onto the case bottom, screw the Sound Support onto the stud – done. That way decoupling also works where the manufacturer only planned for four soft rubber feet. Supplied as a set of 4, matching a complete set of feet.\u003c\/p\u003e\u003ch2\u003eWhy the Adhesive Adapter M6?\u003c\/h2\u003e\u003cp\u003eDecoupling works most cleanly when device and foot are joined firmly and precisely. Loose, unattached absorbers do work too, but a screwed-in foot channels vibration more purposefully into the damping system. That's exactly the connection this adapter creates – without you having to drill a single hole into the case. Your device stays exactly as it left the factory.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eFour flat metal discs, each with a central M6 threaded stud and a self-adhesive underside. The stud engages the M6 threaded hole of the Sound Supports 5023 and 5035 – the two models this adapter is made for. Stick it on, let it set briefly, screw the foot on: you don't need more tools than your hands for that.\u003c\/p\u003e\u003ch3\u003eWho is the Adhesive Adapter M6 suited for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eIdeal for anyone who wants to mount their Sound Supports firmly but whose device has no threaded hole – flat streamers, DACs or network players, for example.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e if your device already has an M6 thread, you don't need the adapter. Nor do you if you just want to place the feet underneath without attaching them. And for the Sound Support 6540 it's the wrong adapter: that one has an M8 thread. The adhesive adapter is the elegant solution for the case in between – no more, but no less either.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA small part with a clear purpose: firm Sound Supports mounting even where a thread was never planned – without drilling, without leaving permanent marks on the case. Not essential, but the cleanest solution for the in-between case. Whether you actually need it, we'll tell you honestly beforehand.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: self-adhesive adapter disc for CR-Tech Sound Supports\u003c\/li\u003e\n\u003cli\u003eThread: M6 external thread (threaded stud)\u003c\/li\u003e\n\u003cli\u003eConnection: engages the M6 threaded hole of the Sound Supports\u003c\/li\u003e\n\u003cli\u003eFits: Sound Supports 5023 and 5035 (M6 thread)\u003c\/li\u003e\n\u003cli\u003eDoes not fit: Sound Supports 6540 (M8 thread); the 5017 is designed for speakers with spikes\u003c\/li\u003e\n\u003cli\u003eAttachment: self-adhesive on one side (industrial specialty adhesive)\u003c\/li\u003e\n\u003cli\u003eMaterial: metal\u003c\/li\u003e\n\u003cli\u003eShape: flat disc with a central threaded stud\u003c\/li\u003e\n\u003cli\u003eIncluded: set of 4 – enough for one 4-piece set of Sound Supports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the Adhesive Adapter M6 have an internal or external thread?\u003c\/h3\u003e\u003cp\u003eAn external thread. An M6 threaded stud protrudes from the disc, onto which you screw the Sound Support – the feet themselves have an M6 threaded hole. So you don't need an extra screw or any tools, just a clean, grease-free bonding surface on the case bottom.\u003c\/p\u003e\u003ch3\u003eHow many adhesive adapters do I need?\u003c\/h3\u003e\u003cp\u003eOne per foot. This set of 4 therefore covers one complete 4-piece set of Sound Supports 5023 or 5035. It doesn't fit the 6540: that model has an M8 thread. If you're unsure, we'll quickly work out what you need.\u003c\/p\u003e\u003ch3\u003eHow do I attach the adapter correctly?\u003c\/h3\u003e\u003cp\u003eFirst clean the bonding surface on the case thoroughly with isopropanol or cleaning alcohol so no film of grease remains. Only then peel off the protective film and press the adapter on firmly. Let the bond set briefly before screwing in the foot – that keeps it holding permanently.\u003c\/p\u003e\u003ch3\u003eCan I remove the adapter again?\u003c\/h3\u003e\u003cp\u003eGenerally yes. With a little careful heat, from a hairdryer for example, and a gentle twisting motion, it usually comes off without leaving residue. Wipe off any adhesive traces afterwards with a soft cloth. For sensitive lacquered surfaces, better ask us beforehand.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Adhesive Adapter M6 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause an accessory only helps when it matches the mounting – and that's exactly what we clarify with you beforehand. The team at HD Zürisee in Wädenswil tells you how many adapters your setup needs and what matters when bonding them. Call us at 044 680 22 00 or write via WhatsApp to \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe Adhesive Adapter belongs under the \u003ca href=\"\/en\/products\/crtech5023\"\u003eCR-Tech Sound Supports 5023\u003c\/a\u003e and \u003ca href=\"\/en\/products\/crtech5035\"\u003e5035\u003c\/a\u003e – the two M6 models it's made for. An overview of everything that absorbs vibration at our shop is in the \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e category. If your device has a thread but in the wrong size, the \u003ca href=\"\/en\/products\/crtechgewindeadapter\"\u003ethread adapter\u003c\/a\u003e gets you there.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"Default Title","offer_id":52989502390608,"sku":null,"price":68.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-klebeadapter-m6-schraegansicht.png?v=1785846685"},{"product_id":"bfly-audio-b-disc-pro-mk2","title":"bFly-Audio b.Disc Pro MK2 – Absorber Washer 4-Pack","description":"\u003cp\u003eThe bFly-Audio b.Disc Pro MK2 is a washer with an integrated absorber that decouples vibrations between spike and floor.\u003c\/p\u003e\n\u003cp\u003eSounds like a minor detail, but on laminate or parquet it makes an audible difference. Spikes couple your speaker rigidly to the surface – and vibrations happily travel from there back across the room into your system. That's exactly the path the b.Disc interrupts: put it under the spike, done, no unscrewing or rebuilding required.\u003c\/p\u003e\n\u003ch2\u003eWhy the b.Disc Pro MK2?\u003c\/h2\u003e\n\u003cp\u003eThe Pro MK2 version works in two layers: a disc made from the high-performance polymer Sorbothane® is cleanly separated from a cork-rubber ring by a film-like insert in purple. That separation of the two absorber layers is exactly what sets it apart from the simpler Basic disc. The body is made of aluminum, and on request a POM glider sits underneath – so you can nudge the speaker into place without scratching the floor.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMore calm in the sound, more three-dimensionality, a more cleanly drawn soundstage. Instead of microphonics and muddy bass, you get a defined, tidy sound. The b.Disc is versatile:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnder the spikes of floorstanding speakers and subwoofers\u003c\/li\u003e\n\u003cli\u003eUnder the feet of high-end components\u003c\/li\u003e\n\u003cli\u003eUnder rack spikes – vibrations never even reach the furniture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho is the b.Disc Pro MK2 for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone with floorstanding speakers, subwoofers, or high-end gear on a floor prone to vibration – laminate, parquet, sprung floors. Bottom line: an absorber is no miracle cure. It won't rescue a poorly set up room or a weak recording, and if you're on solid concrete with no resonance issues, the effect is smaller. And a single disc doesn't do anything – the b.Disc only works as a complete set under every contact point.\u003c\/p\u003e\n\u003ch3\u003eWhich size fits my weight?\u003c\/h3\u003e\n\u003cp\u003eMatch the b.Disc to the weight per contact point: size S up to 5 kg, M up to 12 kg, L up to 100 kg per piece. When in doubt, size up – that won't hurt the sound.\u003c\/p\u003e\n\u003ch3\u003eDo I need the b.Disc under the rack too?\u003c\/h3\u003e\n\u003cp\u003eIt makes sense anywhere spikes transmit vibration – so under rack spikes too. That way vibrations never even make it into the furniture and from there into your gear.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe b.Disc Pro MK2 is one of the least spectacular upgrades on the shelf – and one of the most effective once the floor starts vibrating along. No tools, no rebuilding, two minutes of work, and the system sounds tidier. Hand on heart: when did you last turn so little effort into so much calm? That's why we sell the b.Disc Pro MK2 as a complete 4-pack, matched to your device's load in size S, M, or L – no guesswork at checkout. We're happy to work out which size fits your setup in person – by phone, email, or WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Washer with absorber, for decoupling under spikes and device feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Sorbothane® disc, purple separator film, cork-rubber ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Aluminum, cork rubber, special film, optional POM glider\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize S:\u003c\/strong\u003e Ø 37 mm × 10 mm height · rated up to 5 kg per piece · 4-pack CHF 140.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize M:\u003c\/strong\u003e Ø 42 mm × 11 mm height · rated up to 12 kg per piece · 4-pack CHF 168.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize L:\u003c\/strong\u003e Ø 55 mm × 13 mm height · rated up to 100 kg per piece · 4-pack CHF 248.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlider (optional):\u003c\/strong\u003e POM, selectable as a variant – surcharge CHF 7.00 per piece, i.e. CHF 28.00 for the 4-pack, add about 1 mm extra height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Aluminum (silver) or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 4-pack = 4 pieces, in your chosen size (S\/M\/L), color, and with or without glider\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many b.Disc Pro MK2 do I need?\u003c\/h3\u003e\n\u003cp\u003ePlan for at least three per device or speaker, or four for four contact points. That's why we offer the b.Disc Pro MK2 as a complete 4-pack – suited to most setups, selectable above in your preferred size. A single disc doesn't decouple properly – only the complete set under all spikes brings calm into the sound.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need for my speakers?\u003c\/h3\u003e\n\u003cp\u003eWhat matters is the weight per contact point, not the total weight. Size S carries up to 5 kg, M up to 12 kg, and L up to 100 kg per piece. Divide your speaker's weight by the number of spikes. When in doubt, choose a size up – that won't hurt the sound.\u003c\/p\u003e\n\u003ch3\u003eWhich floors benefit the most from the b.Disc?\u003c\/h3\u003e\n\u003cp\u003eMost noticeably on floors prone to vibration, like laminate, parquet, or sprung floors. There, spikes couple vibrations directly into the floor and back across the room into your system. On solid stone or concrete floors the effect is smaller, but doesn't disappear entirely.\u003c\/p\u003e\n\u003ch3\u003eCan I still move my speakers afterward?\u003c\/h3\u003e\n\u003cp\u003eYes, just choose \"with glider\" among the options above – that costs a CHF 7.00 surcharge per piece, i.e. CHF 28.00 for the whole 4-pack. The POM glider sits on the underside and lets you fine-tune the speaker's position without scratching the floor. Plan for about one millimeter of extra height. Without the glider, the disc stays firmly in place.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio b.Disc from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause size and quantity depend on the weight per contact point and on your floor – and that's exactly what we work out with you, instead of leaving you to guess. Our experienced team in Wädenswil knows the pitfalls from practice. Reach us by phone, email, or WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore absorbers and device feet are under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, and the broader overview is \u003ca href=\"\/en\/collections\/zubehor\"\u003eAll Accessories\u003c\/a\u003e. If the room itself is the problem, \u003ca href=\"\/en\/collections\/akustik\"\u003eAcoustics \u0026amp; Room Optimization\u003c\/a\u003e helps further. \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi Furniture\u003c\/a\u003e, and the \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e that benefit most from a calm surface go well with this too.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"schwarz \/ S \/ ohne Glider","offer_id":52989649977680,"sku":null,"price":140.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ S \/ ohne Glider","offer_id":52989650010448,"sku":null,"price":140.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ ohne Glider","offer_id":53487720268112,"sku":null,"price":168.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ ohne Glider","offer_id":53487720300880,"sku":null,"price":248.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ ohne Glider","offer_id":53487720333648,"sku":null,"price":168.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ ohne Glider","offer_id":53487720366416,"sku":null,"price":248.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ S \/ mit Glider","offer_id":53541837373776,"sku":null,"price":168.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ S \/ mit Glider","offer_id":53541837406544,"sku":null,"price":168.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ mit Glider","offer_id":53541837439312,"sku":null,"price":196.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ mit Glider","offer_id":53541837472080,"sku":null,"price":276.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ mit Glider","offer_id":53541837504848,"sku":null,"price":196.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ mit Glider","offer_id":53541837537616,"sku":null,"price":276.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-b-disc-pro-mk2-absorber-unterlegscheibe-farbvariante-schwarz.jpg?v=1788014450"},{"product_id":"bfly-audio-pure-absorber-set","title":"bFly-Audio Pure Absorber Set – Premium Device Absorbers 4-Pack","description":"\u003cp\u003eThe bFly-Audio Pure is a device absorber that decouples HiFi components from vibration through seven coordinated material layers.\u003c\/p\u003e\n\u003cp\u003eSix materials, seven layers, 44 millimeters in diameter – for a component that ultimately just has a device standing on it, that's a surprising amount of effort. And that's exactly the point: each layer targets a different frequency range. At bFly-Audio, the Pure is the bestseller, and the principle behind it is called MLA – Multi Layer Adjustment. You choose the right load capacity and the height (17, 24 or 31 mm) directly here on the page, from Pure-small to Pure-3.\u003c\/p\u003e\n\u003ch2\u003eWhy the bFly-Audio Pure?\u003c\/h2\u003e\n\u003cp\u003eThe build from top to bottom, as specified by the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCork with natural rubber\u003c\/li\u003e\n\u003cli\u003eSolid aluminum body as a separating layer\u003c\/li\u003e\n\u003cli\u003eCork with natural rubber again\u003c\/li\u003e\n\u003cli\u003eSorbothane with a parallel air chamber\u003c\/li\u003e\n\u003cli\u003eSpecial rubber\u003c\/li\u003e\n\u003cli\u003eAluminum lid\u003c\/li\u003e\n\u003cli\u003eGel cushion with a defined hardness as the floor contact point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA single damping material can only ever do what it's made for – cork works differently from gel, Sorbothane differently from rubber. Stacking multiple layers therefore works more broadband than any single solution. On top of that, the air chamber next to the Sorbothane pneumatically supports the absorber.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eFour absorbers in a case, available in aluminum silver or black, in five load-capacity levels from Pure-small to Pure-3. You place them under the existing device feet or directly under the base plate – done. It makes sense anywhere mechanics are involved or structure-borne noise travels from furniture into the device:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurntables and CD players\u003c\/li\u003e\n\u003cli\u003eAmplifiers, DACs, and streamers\u003c\/li\u003e\n\u003cli\u003eCompact speakers on a sideboard or stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat you get isn't a new tonal color, but more calm in the background: cleaner spatial imaging, more tangible voices, less haze. Described unspectacularly – and that's exactly how it should be.\u003c\/p\u003e\n\u003ch3\u003eWho is the Pure for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants to squeeze the last bit of calm and resolution out of an already well-balanced system, especially under source components with a drive mechanism. Bottom line: if you're just starting out, your money is better invested first in speakers, placement, and the room. An absorber refines a good chain; it doesn't repair a weak one. And if your device sits on a wobbly shelf, you solve the problem one level down. If a tube amplifier is part of your setup, also take a look at the \u003ca href=\"\/en\/products\/bfly-audio-pure-tube-absorber-set\"\u003ePure-Tube\u003c\/a\u003e – the same technology, tuned to the higher operating temperatures of tubes.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Pure is the reference absorber in the bFly lineup: elaborately layered, cleanly built, and still practical for everyday use because it comes as a set of four in a case and sits under your device within minutes. Hand on heart – on a mature system, this is one of the cheapest measures that still moves anything at all. We'll help you work out the right load capacity, height and mounting for your device at HD Zürisee in Wädenswil before you order.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Device absorber for mechanical decoupling, MLA technology (Multi Layer Adjustment)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 6 materials across 7 layers – cork with natural rubber, aluminum body, cork with natural rubber, Sorbothane with a parallel air chamber, special rubber, aluminum lid, gel cushion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e Pure-small 30 mm · Pure-0 to Pure-3 44 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Pure-small fixed at 19 mm · Pure-0 to Pure-3 selectable at 17, 24 or 31 mm – selectable directly here on the page in the «Height \u0026amp; mounting» option (no effect on the sound, no price difference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity per absorber:\u003c\/strong\u003e Pure-small up to 5 kg · Pure-0 up to 5 kg · Pure-1 up to 25 kg · Pure-2 up to 45 kg · Pure-3 up to 70 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e without thread (freestanding, height 17, 24 or 31 mm freely selectable) or with M4, M5, M6 or M8 thread (CHF 30 surcharge per set, always at the designated 24 mm height) – all selectable directly here on the page; Pure-small has no threaded option due to its fixed height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter material:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Aluminum silver or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 4 absorbers in a case, in your chosen color, size, height or thread version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many absorbers do I need per device?\u003c\/h3\u003e\n\u003cp\u003eThe Pure comes as a 4-pack in a case – enough for a device with three or four contact points. Distribute the absorbers under the existing device feet or directly under the base plate, so the weight rests evenly on all absorbers and nothing wobbles.\u003c\/p\u003e\n\u003ch3\u003eWhich Pure variant fits my device?\u003c\/h3\u003e\n\u003cp\u003eWhat matters is the weight per absorber: Pure-small and Pure-0 carry up to 5 kg, Pure-1 up to 25 kg, Pure-2 up to 45 kg, Pure-3 up to 70 kg. Divide your device's weight by the number of contact points and choose the right size directly here on the page.\u003c\/p\u003e\n\u003ch3\u003eWhich height should I choose: 17, 24 or 31 mm?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer recommends placing the Pure directly under the device's base next to the original feet. Choose the height so that the original feet just barely hover – the device then rests exclusively on the absorbers. The height has no effect on the sound and none on the price; it only serves to adapt to your device. It's best to measure the height of your original feet; if in doubt, we're happy to advise you.\u003c\/p\u003e\n\u003ch3\u003eDoes an absorber under a turntable or CD player really make a difference?\u003c\/h3\u003e\n\u003cp\u003eYes, most noticeably there. Devices with a drive mechanism generate fine vibrations themselves and also pick up structure-borne noise from the furniture. The Pure's seven layers filter more broadband than a single damping material – you hear that as more calm between the notes and cleaner spatial imaging.\u003c\/p\u003e\n\u003ch3\u003eCan I also bolt the Pure in place?\u003c\/h3\u003e\n\u003cp\u003eYes, for sizes Pure-0 to Pure-3 you choose in the «Height \u0026amp; mounting» option between the free heights 17, 24, 31 mm and the threaded version M4, M5, M6 or M8 (CHF 30 surcharge per set) – handy if your device already has threaded holes for feet. The threaded version is supplied at the designated 24 mm height. For Pure-small, only the threadless version is available due to its fixed height.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Pure from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause choosing the right load capacity, height and mounting depends on your device – and that's exactly what we work out with you instead of leaving you alone in a jungle of variants. Our well-rehearsed specialist team in Wädenswil knows the systems behind it and thinks them through with you. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe mechanical sources benefit the most – take a look at \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e. More solutions against vibration are under \u003ca href=\"\/en\/collections\/entkopplung\"\u003edecoupling\u003c\/a\u003e, and the stable base for it comes from \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"schwarz \/ PURE-0 \/ 17 mm","offer_id":52989650043216,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 17 mm","offer_id":52989650075984,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 17 mm","offer_id":53486970765648,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 17 mm","offer_id":53486970732880,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 17 mm","offer_id":53486970700112,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-small \/ 19 mm (fix)","offer_id":53486970667344,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 17 mm","offer_id":53486970634576,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 17 mm","offer_id":53486970601808,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 17 mm","offer_id":53486970569040,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-small \/ 19 mm (fix)","offer_id":53486970536272,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 24 mm + Gewinde M4","offer_id":53486999503184,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 24 mm + Gewinde M8","offer_id":53487000125776,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 24 mm + Gewinde M5","offer_id":53486999535952,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 24 mm + Gewinde M6","offer_id":53486999568720,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 24 mm + Gewinde M8","offer_id":53486999601488,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 24 mm + Gewinde M4","offer_id":53486999765328,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 24 mm + Gewinde M5","offer_id":53486999798096,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 24 mm + Gewinde M6","offer_id":53486999830864,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 24 mm + Gewinde M8","offer_id":53486999863632,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 24 mm + Gewinde M4","offer_id":53486999896400,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 24 mm + Gewinde M5","offer_id":53486999929168,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 24 mm + Gewinde M6","offer_id":53486999961936,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 24 mm + Gewinde M8","offer_id":53486999994704,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 24 mm + Gewinde M4","offer_id":53487000027472,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 24 mm + Gewinde M5","offer_id":53487000060240,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 24 mm + Gewinde M6","offer_id":53487000093008,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 24 mm + Gewinde M8","offer_id":53486999470416,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 24 mm + Gewinde M6","offer_id":53486999437648,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 24 mm + Gewinde M5","offer_id":53486999404880,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 24 mm + Gewinde M4","offer_id":53486999372112,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 24 mm + Gewinde M8","offer_id":53486999339344,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 24 mm + Gewinde M6","offer_id":53486999306576,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 24 mm + Gewinde M5","offer_id":53486999273808,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 24 mm + Gewinde M4","offer_id":53486999241040,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 24 mm + Gewinde M8","offer_id":53486999077200,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 24 mm + Gewinde M6","offer_id":53486999044432,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 24 mm + Gewinde M5","offer_id":53486999011664,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 24 mm + Gewinde M4","offer_id":53486998978896,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 24 mm + Gewinde M8","offer_id":53486998946128,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 24 mm + Gewinde M6","offer_id":53486998913360,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 24 mm + Gewinde M5","offer_id":53486998880592,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 24 mm + Gewinde M4","offer_id":53486998847824,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 24 mm","offer_id":53736329609552,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-0 \/ 31 mm","offer_id":53736329642320,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 24 mm","offer_id":53736329675088,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-1 \/ 31 mm","offer_id":53736329707856,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 24 mm","offer_id":53736329740624,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-2 \/ 31 mm","offer_id":53736329773392,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 24 mm","offer_id":53736329806160,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ PURE-3 \/ 31 mm","offer_id":53736329838928,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 24 mm","offer_id":53736329871696,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-0 \/ 31 mm","offer_id":53736329904464,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 24 mm","offer_id":53736329937232,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-1 \/ 31 mm","offer_id":53736329970000,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 24 mm","offer_id":53736330002768,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-2 \/ 31 mm","offer_id":53736330035536,"sku":null,"price":319.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 24 mm","offer_id":53736330068304,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ PURE-3 \/ 31 mm","offer_id":53736330101072,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-pure-absorber-set-geraeteabsorber-lieferumfang.jpg?v=1785441711"},{"product_id":"bfly-audio-talis-basic","title":"bFly-Audio Talis Basic – Speaker Absorber Feet 4-Pack","description":"\u003cp\u003eThe bFly-Audio Talis Basic are absorber feet that are screwed into the speaker's thread in place of spikes and decouple it from the floor.\u003c\/p\u003e\n\u003cp\u003eSpikes are the old school: they couple the speaker to the ground. On solid stone floors that's fine – on laminate or parquet, though, you bring footfall noise, microphonics and undefined bass into your living room. The Talis does the opposite: it decouples instead of coupling.\u003c\/p\u003e\n\u003ch2\u003eWhy the Talis Basic?\u003c\/h2\u003e\n\u003cp\u003eThe aluminum body takes the thread at the top and houses the damping structure: in the Basic, one disc plus one ring of bFly's proven cork-rubber granulate. Sorbothane is deliberately not included here – that's reserved for the Talis Pro. At the bottom sits a glider insert made of POM: it distributes the vibrations and still lets you slide the speaker around without scratching the floor. If you remove the threaded stud at the top, you can also simply place the Talis underneath – for speakers without any thread socket at all.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eDeeper, better controlled bass. Cleaner mids. A soundstage that no longer sticks to the floor. And above all: no footfall noise travelling from the speaker back into the whole system. Anyone who has once heard how a floorstanding speaker on a vibrating wooden floor makes half the room play along knows how much there is to gain here. The Talis can be used not only under speakers, but also under stands, racks and subwoofers.\u003c\/p\u003e\n\u003ch3\u003eWho is the Talis Basic for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for speakers, stands, racks and subwoofers on wooden, laminate or suspended floors, with an M6 to M12 thread socket or for placing underneath. Size M carries up to 50 kg per set and is enough for most bookshelf speakers and lighter floorstanders; the generously dimensioned size L carries up to 400 kg per set and covers practically any device – including heavy floorstanders, racks and subwoofers. Straight talk: the Basic M costs CHF 179.–, the Basic L CHF 279.–. The \u003ca href=\"\/en\/products\/bfly-audio-talis-pro\"\u003eTalis Pro\u003c\/a\u003e sits above that at CHF 269.– (M) and CHF 389.– (L) respectively, and brings more technology with its additional Sorbothane layer. If you deliberately want the simpler, more straightforward solution, the Basic is a good fit in both sizes. And if you listen on a solid concrete slab without resonance problems, you'll notice less of the effect anyway.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Talis Basic is the solid spike replacement for anyone who listens on wooden or suspended floors and needs noticeable headroom: screwed in, calmer in the bass, and still movable thanks to the glider. A good example that the last few percent often lie under the speaker and not in the next piece of equipment. Whether M or L, and whether the Basic or the Talis Pro suits your speakers better, we're happy to work out with you at HD Zürisee in Wädenswil – call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Speaker absorber feet (spike replacement), 4-pack, size M or L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Aluminum body, one disc plus one ring of cork-rubber granulate, POM glider insert on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSorbothane:\u003c\/strong\u003e not included (Talis Pro only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize M:\u003c\/strong\u003e Ø 42 mm · height without thread 15 mm · load capacity up to 50 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize L:\u003c\/strong\u003e Ø 55 mm · height without thread 17 mm · load capacity up to 400 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8 standard included, screws of 15 and 25 mm length supplied · M6, M10 or M12 selectable directly here on the page, surcharge CHF 20 per set · M8 fine thread for USM Haller also selectable, surcharge CHF 30 per set (15 mm screw only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e screw in or place underneath (for speakers without a thread socket)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black or aluminum (silver)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e not specified by the manufacturer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 4 absorbers in your chosen size (M or L), screws matching the chosen thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Talis Basic and Talis Pro?\u003c\/h3\u003e\n\u003cp\u003eThe Basic damps with one disc and one ring of cork-rubber granulate in the aluminum body. The \u003ca href=\"\/en\/products\/bfly-audio-talis-pro\"\u003eTalis Pro\u003c\/a\u003e adds a Sorbothane disc, which is decoupled from the cork-rubber ring by a separating foil. So Sorbothane is found exclusively in the Pro, not in the Basic. The Pro therefore works more broadband, while the Basic remains the robust, uncomplicated solution that is cheaper in both sizes.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need – M or L?\u003c\/h3\u003e\n\u003cp\u003eThe weight per set decides. Talis Basic M carries up to 50 kg per set (Ø 42 mm), Talis Basic L up to 400 kg per set (Ø 55 mm). For bookshelf speakers and lighter floorstanders, M is usually enough; heavy behemoths, racks or subwoofers take L.\u003c\/p\u003e\n\u003ch3\u003eWhich thread do I need, and does a different one cost extra?\u003c\/h3\u003e\n\u003cp\u003eThe standard is M8, which is included in the price. If you need M6, M10 or M12, you select that directly here on the product page – surcharge CHF 20 per set; the M8 fine thread for USM Haller furniture costs a CHF 30 surcharge per set. If your speaker has no thread socket at all, you remove the threaded stud and simply place the Talis underneath – that works just as well as screwed in.\u003c\/p\u003e\n\u003ch3\u003eCan I still move the speakers with the Talis fitted?\u003c\/h3\u003e\n\u003cp\u003eYes. On the underside sits a glider insert made of POM. It distributes the vibrations and still lets you align the speaker to the millimeter without scratching parquet or laminate. Especially when fine-tuning the setup, that's considerably more pleasant than heaving a heavy speaker over spikes.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Talis Basic from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause size, thread and mounting method have to suit your speakers and your floor – and we clarify exactly that with you beforehand instead of leaving you guessing. Our well-rehearsed specialist team in Wädenswil knows the difference between Basic and Pro from practical experience and puts it in context for your system. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching speakers are found under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e; bookshelf variants need the right \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e. You'll find more feet, bases and absorbers under \u003ca href=\"\/en\/collections\/entkopplung\"\u003edecoupling\u003c\/a\u003e, a secure stand for the electronics under \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi furniture\u003c\/a\u003e – and everything on fine-tuning under \u003ca href=\"\/en\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"schwarz \/ L \/ M8","offer_id":52989650108752,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M8","offer_id":52989650141520,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M6","offer_id":53486802338128,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M10","offer_id":53486802370896,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M12","offer_id":53486802403664,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486802436432,"sku":null,"price":309.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M6","offer_id":53486802469200,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M10","offer_id":53486802501968,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M12","offer_id":53486802534736,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486802567504,"sku":null,"price":309.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M8","offer_id":53487735898448,"sku":null,"price":179.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M8","offer_id":53487735931216,"sku":null,"price":179.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M6","offer_id":53487735963984,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M10","offer_id":53487735996752,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M12","offer_id":53487736029520,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53487736062288,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M6","offer_id":53487736095056,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M10","offer_id":53487736127824,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M12","offer_id":53487736160592,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53487736193360,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-talis-basic-lautsprecher-absorberfuesse-lieferumfang-2.jpg?v=1788014202"},{"product_id":"bfly-audio-talis-pro","title":"bFly-Audio Talis Pro – Absorber Feet 4-Pack","description":"\u003cp\u003eThe bFly-Audio Talis Pro is an absorber foot for speakers and devices that combines cork-rubber and Sorbothane in two separate layers and is supplied as a 4-pack.\u003c\/p\u003e\n\u003cp\u003eIn the Talis range it sits between the Basic and the larger Elite – and so hits exactly the point where decoupling becomes audible without you having to rebuild half your system.\u003c\/p\u003e\n\u003ch2\u003eWhy the Talis Pro?\u003c\/h2\u003e\n\u003cp\u003eIn addition to the Basic's cork-rubber ring, the Pro adds a disc of the polymer Sorbothane, separated from the cork-rubber ring by a foil-like insert (purple). That very separation is the trick: each layer works in a different frequency range, and together they cover more than any single material could. The body is made of aluminum, and a glider insert made of POM sits on the underside.\u003c\/p\u003e\n\u003ch2\u003eWhat you gain\u003c\/h2\u003e\n\u003cp\u003eMore calm in the sound, more clearly outlined voices, a soundstage that doesn't wander. The POM glider distributes the vibrations towards the floor and still lets you align the speaker millimeter by millimeter without scratching parquet or tiles. Usable under floorstanding speakers, stands, racks and subwoofers – anywhere structure-borne noise looks for its way into the floor.\u003c\/p\u003e\n\u003ch3\u003eWho is the Talis Pro for – and who is it not for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for you if full-grown floorstanding speakers stand on a resonance-prone wooden floor and you want to get the last bit out of a cleanly built chain. Straight talk: on a solid concrete floor without a resonance issue, the effect is smaller. And if you're just starting out, you'll already do very well with the \u003ca href=\"\/en\/products\/bfly-audio-talis-basic\"\u003eTalis Basic\u003c\/a\u003e – it has cork-rubber and the POM glider, but no Sorbothane. The step up to the Pro is audible, but subtle, not spectacular.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Talis Pro is the point where decoupling stops being a matter of faith: two cleanly separated absorber layers, a practical glider, a result you don't have to go looking for. Hand on heart – if your speakers stand on a wooden floor and have never been decoupled, you're leaving precision on the table. Which size and which thread suit your speakers, you choose right here on the page – or we're happy to work it out with you at HD Zürisee in Wädenswil: phone, email or WhatsApp is all it takes.\u003c\/p\u003e\n\u003cp\u003eWhat the trade press says: \"The Talis Pro already provide noticeably more calm, contour and space\" – Alfredo Mascia, HiFi-IFAs, 19.07.2026.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Absorber feet for speakers and devices (spike replacement), 4-pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Aluminum body, cork-rubber ring, Sorbothane disc, foil-like separating layer (purple) between the two layers, glider insert made of POM on the underside\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize M:\u003c\/strong\u003e Ø 42 mm · height without thread 15 mm · up to 50 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize L:\u003c\/strong\u003e Ø 55 mm · height without thread 17 mm · up to 400 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8 standard included, screws of 15 and 25 mm length supplied · M6, M10 or M12 selectable directly here on the page, surcharge CHF 20 per set · M8 fine thread for USM Haller also selectable, surcharge CHF 30 per set (15 mm screw only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e screw in or place underneath (without thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black or silver (aluminum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 4 absorbers incl. screws matching the chosen thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Talis Pro and Talis Basic?\u003c\/h3\u003e\n\u003cp\u003eThe Pro has an additional Sorbothane layer. In the Basic there is only cork-rubber above the POM glider; in the Pro a Sorbothane disc is added, separated by a foil-like purple insert. Two layers work more broadband than one – you hear that above all as more calm in the mids.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need – M or L?\u003c\/h3\u003e\n\u003cp\u003eThe weight per set decides. Talis M measures 42 mm in diameter and carries up to 50 kg per set, Talis L measures 55 mm and carries up to 400 kg per set. For normal floorstanding speakers M is usually enough; heavy behemoths, racks or subwoofers take L.\u003c\/p\u003e\n\u003ch3\u003eCan I move the speakers with the Talis Pro fitted?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what the glider is for. The POM insert on the underside distributes the vibrations and at the same time lets the speaker glide instead of digging into the floor. So you can fine-tune the alignment without unscrewing the feet again or damaging the floor covering.\u003c\/p\u003e\n\u003ch3\u003eWhich thread do I need, and does a different one cost extra?\u003c\/h3\u003e\n\u003cp\u003eThe standard is M8, screws of 15 and 25 mm are included – covered by the price. You select M6, M10 or M12 directly here on the product page, surcharge CHF 20 per set; the M8 fine thread for USM Haller furniture costs a CHF 30 surcharge per set. If your speaker has no thread at all, you simply place the absorbers underneath. That way the Talis Pro covers practically any speaker and any rack.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Talis Pro from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause decoupling has to fit the system, not the brochure. We work out with you whether the Pro really brings something on your floor and with your speakers, or whether the Basic is enough. Plus thread and size chosen correctly, with advice drawn from many years of practice in Wädenswil. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the floorstanding speakers for which the Pro is worthwhile under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e; bookshelf speakers are combined with suitable \u003ca href=\"\/en\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e. For the electronics there is \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi furniture\u003c\/a\u003e, for the room itself \u003ca href=\"\/en\/collections\/akustik\"\u003eacoustics\u003c\/a\u003e – and further absorbers and bases are under \u003ca href=\"\/en\/collections\/entkopplung\"\u003edecoupling\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"schwarz \/ M \/ M8","offer_id":52989650239824,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M8","offer_id":52989650272592,"sku":null,"price":269.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M8","offer_id":53486752465232,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M8","offer_id":53486752498000,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M6","offer_id":53486802600272,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M10","offer_id":53486802633040,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M12","offer_id":53486802665808,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53486802698576,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M6","offer_id":53486802731344,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M10","offer_id":53486802764112,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M12","offer_id":53486802796880,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53486802829648,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M6","offer_id":53486802862416,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M10","offer_id":53486802895184,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M12","offer_id":53486802927952,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"schwarz \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486802960720,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M6","offer_id":53486802993488,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M10","offer_id":53486803026256,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M12","offer_id":53486803059024,"sku":null,"price":409.0,"currency_code":"CHF","in_stock":true},{"title":"silber \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486803091792,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-talis-pro-absorberfuesse-setansicht.webp?v=1785441770"},{"product_id":"crtech5017","title":"CR-Tech Sound Supports 5017, Set of 4","description":"\u003cp\u003eThe CR-Tech Sound Supports 5017 are a set of 4 threadless decoupling feet that separate spiked speakers and light equipment from the floor without changing the tilt angle.\u003c\/p\u003e\u003cp\u003eDeveloped and made in Switzerland, they're simply placed under the existing spike or original foot – nothing gets screwed in. At 50 mm diameter and 17 mm height, they're the flattest variant in the Sound Supports family. You choose the hardness grade and colour directly above.\u003c\/p\u003e\u003ch2\u003eWhy the Sound Supports 5017?\u003c\/h2\u003e\u003cp\u003eSpikes serve a purpose: firm, wobble-free footing and a well-defined bass foundation. Their downside is the flip side of that – they couple the cabinet rock-solid to the floor, and every cabinet vibration travels straight into the parquet, the screed, the flat below. That's exactly where the 5017 comes in: the spike stays put, the angle too, but the three-stage build absorbs the vibrations and dissipates them in a controlled way instead of passing them on unchecked.\u003c\/p\u003e\u003cp\u003eBecause it needs no thread, it's also the uncomplicated solution for electronics: preamps, power amps, CD players, turntables or music servers simply sit on top. No drilling, no rebuilding, nothing you couldn't undo in two minutes.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eMost clearly in the bass. The boom that used to travel through the floor into the whole room – and gladly into the room next door – loses its motorway. The low end becomes drier and better defined, the soundstage calmer, voices stand more stably. And the floor stops quietly playing along. What it used to do, honestly, you only notice once it stops.\u003c\/p\u003e\u003ch3\u003eWho's the 5017 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eThe right choice under spiked floorstanding speakers up to around 30 kg, whose placement and tilt you don't want to lose – especially on hard floors like parquet, laminate or stone. Just as much under light sources and amplifiers standing on a rack or sideboard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlain talk:\u003c\/strong\u003e If your speaker has no spikes but threaded holes for feet instead, the 5023 with M6 thread is the better grip – it gets screwed in firmly. If your cabinet weighs noticeably more, the stronger 5035 or 6540 belong underneath. And on a soft, floating floor that absorbs a lot anyway, the effect turns out smaller than on a hard surface. That's how honest this needs to be.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe flattest and most uncomplicated solution in the range – right when your cabinet stands on spikes and you don't want to sacrifice height or tilt either. On parquet, laminate or stone the gain is most audible. Which hardness grade suits your weight, we're happy to work out with you in advance at HD Zürisee in Wädenswil – that's the one decision where a short call gets you further than long reading.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: threadless decoupling foot (spike riser) for speakers and equipment\u003c\/li\u003e\n\u003cli\u003eDiameter: 50 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 17 mm\u003c\/li\u003e\n\u003cli\u003eMounting: threadless – placed under the existing spike or original foot, tilt angle is preserved\u003c\/li\u003e\n\u003cli\u003eConstruction: three-stage – absorbs vibrations and dissipates them to the floor in a controlled way\u003c\/li\u003e\n\u003cli\u003eHardness grade: 17 \/ 30 \/ 45 Shore selectable in the shop; further hardnesses from 12 to 64 Shore on request\u003c\/li\u003e\n\u003cli\u003eApplication range: speakers up to 30 kg as well as preamps, power amps, CD players, turntables and music servers\u003c\/li\u003e\n\u003cli\u003eColour: selectable – silver or black\u003c\/li\u003e\n\u003cli\u003eOrigin: developed and made in Switzerland\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 4 (4 pieces)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo the 5017 need a thread on my speaker?\u003c\/h3\u003e\u003cp\u003eNo. The 5017 are threadless. The existing spike or original foot of your speaker is simply placed on top – you don't screw anything or change anything on the cabinet. The tilt you've set stays exactly as you once aligned it.\u003c\/p\u003e\u003ch3\u003eWhat's the difference between the 5017 and the 5023?\u003c\/h3\u003e\u003cp\u003eThe mounting principle. The 5017 needs no thread and is placed underneath, the 5023 is screwed firmly to the cabinet or unit with an M6 thread. The 5017 is intended for spiked speakers, the 5023 for existing threaded holes. Both come in various colours and hardness grades.\u003c\/p\u003e\u003ch3\u003eWhich hardness grade should I choose?\u003c\/h3\u003e\u003cp\u003eIt depends on the weight resting on one foot: the heavier, the higher the Shore rating. The shop offers 17, 30 and 45 Shore, further hardnesses from 12 to 64 Shore we source on request. Tell us the model and weight, and we'll place it for you.\u003c\/p\u003e\u003ch3\u003eCan I also put the 5017 under a CD player or a power amp?\u003c\/h3\u003e\u003cp\u003eYes. Because they need no thread, they can be placed under the original feet of equipment – preamps, power amps, CD players, turntables and music servers included. The application range goes up to 30 kg, which easily covers the vast majority of electronic components.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Sound Supports 5017 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause hardness grade and quantity are a matter of experience – and that's exactly where we help. Our practised team in Wädenswil assesses your speakers and tells you honestly whether the step is worth it for your floor. Call us on 044 680 22 00 or write on WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe 5017 unfold their effect under spiked cabinets and light electronics. Take a look at our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding Speakers\u003c\/a\u003e and the rest of our \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e range. If the room itself resonates strongly, it's also worth a look at our \u003ca href=\"\/en\/collections\/akustik\"\u003eAcoustic Solutions\u003c\/a\u003e.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"17 Shore \/ Silber","offer_id":53129141584208,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"17 Shore \/ Schwarz","offer_id":53129141616976,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"30 Shore \/ Silber","offer_id":53129141649744,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"30 Shore \/ Schwarz","offer_id":53129141682512,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"45 Shore \/ Silber","offer_id":53129141715280,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"45 Shore \/ Schwarz","offer_id":53129141748048,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-5017-spike-untersetzer-silber-frontansicht.png?v=1785846811"},{"product_id":"crtech5023","title":"CR-Tech Sound Supports 5023, Set of 4","description":"\u003cp\u003eThe CR-Tech Sound Supports 5023 are a set of 4 decoupling feet with M6 thread, screwed firmly to speakers and electronics in place of existing equipment feet or spikes.\u003c\/p\u003e\u003cp\u003eLike the whole family, they come from Swiss development and manufacturing. The difference to the threadless 5017 lies in the connection: the 5023 doesn't sit under the unit, it becomes part of it. If the existing thread doesn't match, adapters to other sizes are available. You choose the hardness grade and colour directly above.\u003c\/p\u003e\u003ch2\u003eWhy the 5023?\u003c\/h2\u003e\u003cp\u003eA firm, defined screw connection channels vibration energy into the damping system more purposefully than a loosely placed absorber that loses its position with every shift. You unscrew the original feet or spikes, screw in the 5023 – done. From then on the foot absorbs whatever vibration the chassis, transformer or drive produces, and dissipates it in a controlled way instead of passing it on to floor and furniture.\u003c\/p\u003e\u003cp\u003eThat makes it the all-rounder of the range: it fits under light speakers just as well as under preamps, power amps, CD players, turntables or servers – anywhere an M6 hole sits, or an adapter makes it accessible.\u003c\/p\u003e\u003ch2\u003eWhat you gain\u003c\/h2\u003e\u003cp\u003eFirst in the bass: it becomes tighter and better defined, because less energy seeps away unused into the rack or the floor. After that, the calm around it stands out – voices and instruments separate more clearly from one another, the imaging stands more stably in the room. Sounds unspectacular, but that's exactly the point: nothing is added, something falls away.\u003c\/p\u003e\u003ch3\u003eWho's the 5023 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eFor anything up to around 30 kg that comes with an M6 threaded hole – speakers as well as equipment, screwed firmly rather than merely placed underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlain talk:\u003c\/strong\u003e if your cabinet stands on spikes and you want to keep their angle, take the threadless 5017. If it gets heavier – medium-sized floorstanders and up – the 5035 or 6540 are the right choice, the 5023 isn't designed for that. And if your unit has no threaded hole at all, clarify the adapter with us beforehand instead of ordering on a hunch.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe most versatile foot in the range – first choice wherever an M6 hole sits, and more effective than any loosely placed disc. Thread, hardness grade and quantity are what decide the outcome; get that trio right and the result is right. That's exactly what we work out with you in advance at HD Zürisee in Wädenswil, adapters included.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: threaded decoupling foot for speakers and equipment\u003c\/li\u003e\n\u003cli\u003eThread: M6 (internal thread); thread adapters to other sizes available\u003c\/li\u003e\n\u003cli\u003eMounting: screwed in in place of existing equipment feet or spikes\u003c\/li\u003e\n\u003cli\u003eConstruction: three-stage – absorbs vibrations and dissipates them to the floor in a controlled way\u003c\/li\u003e\n\u003cli\u003eHardness grade: 17 \/ 30 \/ 45 Shore selectable in the shop; further hardnesses on request\u003c\/li\u003e\n\u003cli\u003eApplication range: up to 30 kg – light speakers as well as preamps, power amps, CD players, turntables and servers\u003c\/li\u003e\n\u003cli\u003eColour: selectable – silver or black\u003c\/li\u003e\n\u003cli\u003eOrigin: developed and made in Switzerland\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 4 (4 pieces)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo the 5023 fit my speaker?\u003c\/h3\u003e\u003cp\u003eIf your cabinet or unit has an M6 threaded hole for feet, they fit directly. For different thread sizes, matching adapters are available. If in doubt, tell us the brand and model, and we'll clarify what you need beforehand – that saves you a return.\u003c\/p\u003e\u003ch3\u003eWhat's the difference to the 5017?\u003c\/h3\u003e\u003cp\u003eThe mounting. The 5023 is screwed in with M6 thread and sits firmly, the 5017 is placed threadless under an existing spike or original foot. Choose the 5023 for threaded holes, the 5017 for spiked cabinets whose tilt should be preserved.\u003c\/p\u003e\u003ch3\u003eHow many feet do I need?\u003c\/h3\u003e\u003cp\u003eAs many as your speaker or unit has contact points – usually four, which is why the set is put together that way. If your cabinet stands on three spikes, one set isn't enough for a pair. Tell us briefly what you have, and we'll work out the quantity before you order.\u003c\/p\u003e\u003ch3\u003eWhich hardness grade do I need?\u003c\/h3\u003e\u003cp\u003eWhat matters is the load per foot: the heavier the speaker or unit, the higher the Shore rating. The shop offers 17, 30 and 45 Shore, further hardnesses we source on request. Give us the weight and model, and the choice will be right first try.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Sound Supports 5023 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause thread, hardness grade and quantity decide the effect – and we go through that with you before the purchase instead of letting you guess. Our technician Mauri fits the feet on site on request. You can reach us on 044 680 22 00 or on WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eScrewed in, the 5023 is used under cabinets as much as under electronics. Our \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding Speakers\u003c\/a\u003e, our \u003ca href=\"\/en\/collections\/hifi-elektronik\"\u003eHi-Fi Electronics\u003c\/a\u003e and the rest of our \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e range, where you'll also find the thread adapters, all pair well with it. For the finishing touch in the room, it's worth a look at our \u003ca href=\"\/en\/collections\/akustik\"\u003eAcoustic Solutions\u003c\/a\u003e.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"17 Shore \/ Silber","offer_id":53129142010192,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"17 Shore \/ Schwarz","offer_id":53129142042960,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"30 Shore \/ Silber","offer_id":53129142075728,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"30 Shore \/ Schwarz","offer_id":53129142108496,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"45 Shore \/ Silber","offer_id":53129142141264,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"45 Shore \/ Schwarz","offer_id":53129142174032,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-5023-entkopplungsfuss-m6-silber-frontansicht.png?v=1785846834"},{"product_id":"crtechgewindeadapter","title":"CR-Tech Sound Supports Thread Adapter, Set of 4","description":"\u003cp\u003eThe CR-Tech Sound Supports thread adapter is a double-sided threaded stud that connects the Sound Supports feet with a different thread size to a speaker or unit.\u003c\/p\u003e\u003cp\u003eThe feet themselves come with a threaded hole – M6 on the 5023 and 5035 models, M8 on the larger 6540. If your cabinet or unit has a different thread, exactly one part is missing: this stud. It carries an external thread of a different size on each side, bridging the difference. Like all CR-Tech products, it's made in Switzerland. The set of 4 covers a complete set of feet.\u003c\/p\u003e\u003ch2\u003eWhy the thread adapter?\u003c\/h2\u003e\u003cp\u003eNot every speaker and not every unit has exactly the thread the foot expects. The alternatives would be to skip decoupling or improvise – both a shame given the effort. With the right adapter in between, the connection sits firm and defined, and the vibrations find their way into the damping system instead of into the floor.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eFour metal threaded studs, each with two external threads of different sizes. You screw one side into the Sound Support, the other into the speaker or unit. Which size combination you need depends on your two threads – CR-Tech makes adapters for various thread sizes, so we clarify this with you briefly before you order.\u003c\/p\u003e\u003ch3\u003eWho's the thread adapter for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eUseful wherever the thread on the cabinet or unit doesn't directly match the 5023, 5035 or 6540.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlain talk:\u003c\/strong\u003e if your thread already matches, you don't need the adapter – it would just be one more part in the chain. If the housing has no thread at all, the adhesive adapter, not this one, is the solution. And the 5017 is meant for speakers with spikes: there's nothing to screw there.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe unassuming problem-solver. If the thread on cabinet or unit doesn't directly match the foot, this stud closes the gap – firm and defined, instead of improvising with washers. Which sizes the right set needs depends on both sides; we clarify that with you briefly before you order.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: thread adapter for CR-Tech Sound Supports\u003c\/li\u003e\n\u003cli\u003eDesign: double-sided threaded stud, external thread of two different sizes on each side\u003c\/li\u003e\n\u003cli\u003eFunction: connects the foot's threaded hole with the thread on the speaker or unit\u003c\/li\u003e\n\u003cli\u003eThread on the foot: M6 on the 5023 and 5035, M8 on the 6540\u003c\/li\u003e\n\u003cli\u003eFits: Sound Supports 5023, 5035 and 6540\u003c\/li\u003e\n\u003cli\u003eThread sizes: CR-Tech offers adapters for various thread sizes – please specify the combination you need when ordering\u003c\/li\u003e\n\u003cli\u003eMaterial: metal\u003c\/li\u003e\n\u003cli\u003eOrigin: made in Switzerland\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 4 (4 pieces)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich thread adapter do I need?\u003c\/h3\u003e\u003cp\u003eIt depends on two threads: the one on the foot (M6 on the 5023 and 5035, M8 on the 6540) and the one on your speaker or unit. Tell us both, and we'll tell you which combination to order – or whether you don't need an adapter at all.\u003c\/p\u003e\u003ch3\u003eWhat does the thread adapter look like and how do I fit it?\u003c\/h3\u003e\u003cp\u003eIt's a short metal stud with external thread on both sides, each side a different size. You screw the matching side into the Sound Support, the other into the speaker or unit, then tighten both hand-tight. You generally need no tools for this.\u003c\/p\u003e\u003ch3\u003eHow many adapters are in the set?\u003c\/h3\u003e\u003cp\u003eFour pieces – enough for a complete set of feet, that is, for a set of 4 of the 5023 or 5035 models. For the 6540, which comes as a set of 2, you need two adapters per set; put the rest aside for the next unit.\u003c\/p\u003e\u003ch3\u003eThread adapter or adhesive adapter – what's the difference?\u003c\/h3\u003e\u003cp\u003eThe thread adapter matches an existing thread to a different size. The adhesive adapter is for housings without any thread at all: it's glued on and creates the screw point in the first place. Which one is right is decided solely by your speaker or unit.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Sound Supports thread adapter from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause the right adapter is a matter of two threads – and we clarify that with you beforehand instead of letting you guess. At HD Zürisee in Wädenswil, we know the CR-Tech feet from daily practice and tell you what belongs to your setup. Reach us on 044 680 22 00 or on WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe thread adapter belongs with the threaded Sound Supports: \u003ca href=\"\/en\/products\/crtech5023\"\u003e5023\u003c\/a\u003e, \u003ca href=\"\/en\/products\/crtech5035\"\u003e5035\u003c\/a\u003e and \u003ca href=\"\/en\/products\/crtech6540\"\u003e6540\u003c\/a\u003e. What else helps against vibration you'll find in the \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e category. If the housing has no thread at all, the \u003ca href=\"\/en\/products\/crtechklebeadapterm6\"\u003eAdhesive Adapter M6\u003c\/a\u003e is the solution – and for speakers standing on spikes, there's the \u003ca href=\"\/en\/products\/crtech5017\"\u003e5017\u003c\/a\u003e.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"Default Title","offer_id":53129422897488,"sku":null,"price":56.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-gewindeadapter-schraegansicht.png?v=1785846834"},{"product_id":"isotek-m6-spike-upgrade-kit","title":"IsoTek M6 Spike Upgrade Kit","description":"\u003cp\u003eThe IsoTek M6 Spike Upgrade Kit is a decoupling set: height-adjustable spikes with M6 thread that replace your IsoTek unit's standard feet and drain away resonances.\u003c\/p\u003e\n\u003cp\u003eMechanical vibrations — from the floor, from speakers, from the transformer itself — can transfer to sensitive electronics. The spikes couple the chassis to the surface in a defined way and channel disturbance energy away in a targeted manner. The M6 thread fits the corresponding IsoTek components.\u003c\/p\u003e\n\u003ch3\u003eWho is the M6 Spike Kit for? (and who it's not for — straight talk)\u003c\/h3\u003e\n\u003cp\u003eFor owners of compatible IsoTek units who want to coax out that last bit of quietness. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e check the thread (M6) and the placement before buying — on a resonant piece of furniture, spikes achieve less than on a stable surface.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small, refined upgrade for mechanical calm: defined coupling instead of wobbly rubber feet — affordable and effective in the right place.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: spike \/ decoupling set\u003c\/li\u003e\n\u003cli\u003eThread: M6\u003c\/li\u003e\n\u003cli\u003eFunction: mechanical coupling, resonance draining; height-adjustable\u003c\/li\u003e\n\u003cli\u003eApplication: replacement for the standard feet of compatible IsoTek units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the IsoTek M6 Spike Upgrade Kit do?\u003c\/h3\u003e\n\u003cp\u003eThe spikes replace the standard feet and couple the unit to the surface in a defined way to drain away vibrations. The M6 thread fits the corresponding IsoTek components.\u003c\/p\u003e\n\u003ch3\u003eDoes the M6 thread fit my unit?\u003c\/h3\u003e\n\u003cp\u003eThe kit has an M6 thread and replaces the standard feet of compatible IsoTek components. Check the thread and placement before buying — on a stable surface, spikes work noticeably better than on a resonant piece of furniture.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the IsoTek M6 Spike Kit at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with Mauri we think through the placement together with you — our own technician who knows where decoupling really makes a difference. Advice in Wädenswil by appointment.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/collections\/isotek\"\u003eIsoTek mains conditioners\u003c\/a\u003e and matching \u003ca href=\"\/en\/collections\/kabel\"\u003ecables \u0026amp; connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"IsoTek","offers":[{"title":"Default Title","offer_id":53131035246928,"sku":"302476","price":91.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/isotek-m6-spike-upgrade-kit-detailansicht.jpg?v=1786455335"},{"product_id":"bassocontinuo-ultra-feet-level-1-grun","title":"Bassocontinuo Ultra Feet Level 1 Green","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 1 Green is an isolating component\/speaker foot that uses viscoelastic damping materials to absorb vibrations from the floor and the motor.\u003c\/p\u003e\n\n\u003cp\u003eUltra Feet is Bassocontinuo's modular isolation foot system: each level uses viscoelastic damping materials at a different density, matched to a specific weight. Level 1 Green is the lightest stage in the series and thus the all-purpose entry point for small, light components that benefit noticeably from isolation but don't need a heavy foundation.\u003c\/p\u003e\n\n\u003ch2\u003eWho is Level 1 Green suited for?\u003c\/h2\u003e\n\u003cp\u003eLevel 1 Green is designed for components weighing 0.1 to 1.5 kg per foot – so for very light electronics such as small phono preamps, streaming bridges or DACs without their own heavy power supply. For an integrated amplifier, CD player or even speakers, this level is clearly too soft: there you need a higher level (from Level 2 for electronics, from Level 6 for speakers), otherwise the foot compresses too much instead of damping.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn affordable, uncomplicated entry into the Ultra Feet series for the lightest components in the rack. If you're not sure whether your component is too light or too heavy for Level 1, it's best to have that quickly confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/Level: Green (Level 1)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 0.1–1.5 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: viscoelastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: electronics (very light components)\u003c\/li\u003e\n\u003cli\u003ePrice, set of 3: CHF 145.00\u003c\/li\u003e\n\u003cli\u003ePrice, set of 4: CHF 180.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 1 Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight is Level 1 Green suited for?\u003c\/strong\u003e\u003cbr\u003eLevel 1 Green is designed for very light components weighing 0.1 to 1.5 kg per foot, such as small streaming bridges or light preamps. Heavier electronics like integrated amplifiers or CD players need a higher level, otherwise the foot compresses too much and the damping doesn't work optimally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put Level 1 Green under speakers?\u003c\/strong\u003e\u003cbr\u003eNo, Level 1 Green is designed for very light electronics, not for speakers. For speakers, Bassocontinuo offers Levels 6 and 7 with a much higher load range. A level that's too soft under a speaker compresses instead of damping and brings no sonic benefit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many feet do I need per component?\u003c\/strong\u003e\u003cbr\u003eMost components stand stably on three feet (set of 3); for larger or unevenly loaded chassis, some manufacturers recommend four feet (set of 4) for more even support. Both are available for Level 1 Green.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo Ultra Feet fit under every component?\u003c\/strong\u003e\u003cbr\u003eUltra Feet are placed directly under the chassis, without drilling or gluing, and generally fit under any component with a flat footprint. The only thing that matters is that the weight per foot matches the load range of the chosen level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil advises you personally on which level suits your component and its weight. Maurizio Nardiello knows the finer points of placement, and we bring years of experience in specialist Hi-Fi retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00 or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about getting one? Ultra Feet combine freely – take a look at \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448260223312,"sku":null,"price":145.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448260256080,"sku":null,"price":180.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-1-gruen-isolationsfuss-lieferumfang.jpg?v=1787677458"},{"product_id":"bassocontinuo-ultra-feet-level-2-silber","title":"Bassocontinuo Ultra Feet Level 2 Silver","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 2 Silver is an isolating device\/speaker foot that uses visco-elastic damping materials to absorb vibrations, purpose-built for light to medium-weight electronics.\u003c\/p\u003e\n\n\u003cp\u003eLevel 2 Silver covers the range just above Level 1, making it the common choice for smaller to medium-sized electronic components. The damping density is tuned so that floor and chassis vibrations are reliably absorbed without the device sinking in.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 2 Silver for?\u003c\/h2\u003e\n\u003cp\u003eLevel 2 Silver is designed for electronics weighing 0.1 to 2.5 kg per foot – so compact DACs, streamers, preamps or light CD players. For very light additional devices, Level 1 is often enough; for a heavy integrated amp or power amp, Level 2 is usually too soft – Level 3 or 4 is recommended there.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA solid mid-range foot for most of the electronics in a typical hi-fi rack. If you're not sure about the weight, a quick look at your device's datasheet or a call to us will help.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Silver (Level 2)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 0.1–2.5 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: electronics\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 180.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 205.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 2 Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich devices is Level 2 Silver suitable for?\u003c\/strong\u003e\u003cbr\u003eLevel 2 Silver is designed for electronics weighing 0.1 to 2.5 kg per foot, such as DACs, streamers or smaller preamps. For very light devices, Level 1 is usually enough; for heavy integrated amps or power amps, a higher level like 3 or 4 is the better choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between Level 1 and Level 2?\u003c\/strong\u003e\u003cbr\u003eBoth levels use the same technology, but with visco-elastic damping materials of different density. Level 1 is designed for very light devices up to 1.5 kg per foot, Level 2 for slightly heavier electronics up to 2.5 kg per foot. The colour shows the level at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Level 2 change the sound of my device?\u003c\/strong\u003e\u003cbr\u003eUltra Feet don't artificially alter the sound character; they reduce vibrations that would otherwise reach the device through the floor and chassis. In practice, this often results in a clearer, calmer presentation, especially with sensitive digital electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I combine Level 2 with a Bassocontinuo rack?\u003c\/strong\u003e\u003cbr\u003eYes, Ultra Feet are designed as a standalone system and can be used underneath individual components in addition to a Bassocontinuo rack, but work just as well directly on any shelf or floor without a rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448261337424,"sku":null,"price":180.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448261370192,"sku":null,"price":205.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-2-silber-isolationsfuss-lieferumfang.jpg?v=1787677459"},{"product_id":"bassocontinuo-ultra-feet-level-3-rot","title":"Bassocontinuo Ultra Feet Level 3 Red","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 3 Red is an isolating device\/speaker foot designed with visco-elastic damping materials for medium-weight electronics.\u003c\/p\u003e\n\n\u003cp\u003eLevel 3 Red bridges the gap between light and heavy electronics. The damping density is chosen higher than Level 1 and 2, so that devices with more inherent weight – for example due to a larger power supply or chassis – are reliably decoupled too.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 3 Red for?\u003c\/h2\u003e\n\u003cp\u003eLevel 3 Red is designed for electronics weighing 2.6 to 5 kg per foot, so many integrated amps, CD players and larger streamers with a more substantial power supply. For small, light additional devices this level is dimensioned too firm – nothing sinks in, but the damping effect stays below its potential. Level 3 is not intended for speakers – for those, Levels 6 and 7 exist.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA reliable foot for the medium to upper weight range of classic hi-fi electronics. If you're unsure between Level 2 and 3, better check the device's weight than guess.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Red (Level 3)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 2.6–5 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: electronics\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 210.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 275.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 3 Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight is Level 3 Red designed for?\u003c\/strong\u003e\u003cbr\u003eLevel 3 Red covers electronics weighing 2.6 to 5 kg per foot, so many integrated amps, CD players and larger streamers. If your device is lighter, the damping won't work optimally; if it's heavier, it's worth looking at Level 4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know if my amplifier suits Level 3?\u003c\/strong\u003e\u003cbr\u003eThe simplest way is via the device's total weight, divided by the number of feet, typically three or four. If the value per foot falls between 2.6 and 5 kg, Level 3 fits. If unsure, HD Zürisee will help you with a quick assessment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the set of 3 and set of 4 sound different?\u003c\/strong\u003e\u003cbr\u003eNo, the damping material is identical in both sets. The choice depends solely on how many feet your device has, or how it stands most stably – usually three are enough, some devices benefit from four.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Level 3 suitable for a CD player too?\u003c\/strong\u003e\u003cbr\u003eYes, as long as the CD player falls in the range of 2.6 to 5 kg per foot, Level 3 is a suitable choice. Transports in particular often respond audibly to a calmer, lower-vibration setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448261468496,"sku":null,"price":210.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448261501264,"sku":null,"price":275.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-3-rot-isolationsfuss-lieferumfang.jpg?v=1787677459"},{"product_id":"bassocontinuo-ultra-feet-level-4-gold","title":"Bassocontinuo Ultra Feet Level 4 Gold","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 4 Gold is an isolating device\/speaker foot designed for heavier electronic components with increased damping density.\u003c\/p\u003e\n\n\u003cp\u003eLevel 4 Gold is intended for noticeably heavier electronics than the levels below it. As device weight increases, the visco-elastic material needs a higher density so it doesn't compress under load but keeps damping effectively.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 4 Gold for?\u003c\/h2\u003e\n\u003cp\u003eLevel 4 Gold suits electronics weighing 5.1 to 10 kg per foot – for example more powerful integrated amps, power amps or devices with a large toroidal transformer. For lighter components this level is too firm, leaving the damping effect unused; for very heavy power amps or racks over 10 kg per foot, Level 5 is the right choice.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA foot for the heavier category of electronics, where Level 2 or 3 would reach their limit. Given exactly the right weight, the damping here works noticeably reliably.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Gold (Level 4)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 5.1–10 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: electronics\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 275.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 335.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 4 Gold\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich devices is Level 4 Gold designed for?\u003c\/strong\u003e\u003cbr\u003eLevel 4 Gold is designed for heavier electronics weighing 5.1 to 10 kg per foot, such as powerful integrated amps or devices with a large power supply. For lighter components the damping is dimensioned too firm; for even heavier devices there's Level 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if I put too light a device on Level 4?\u003c\/strong\u003e\u003cbr\u003eThe material then won't be compressed enough to develop its full damping effect. The device will still stand securely, but benefits less from the isolation than with a suitably chosen, lighter level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put Level 4 under a power amp?\u003c\/strong\u003e\u003cbr\u003eYes, as long as the power amp falls within the load range of 5.1 to 10 kg per foot. Many more compact power amps fall within this range; heavier models need Level 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow can I tell the levels apart visually?\u003c\/strong\u003e\u003cbr\u003eEach level has its own fixed colour – Level 4 is Gold. So you can see at a glance which level is under which device, even when several levels are in use in the same rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448262189392,"sku":null,"price":275.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448262222160,"sku":null,"price":335.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-4-gold-isolationsfuss-lieferumfang.jpg?v=1787677459"},{"product_id":"bassocontinuo-ultra-feet-level-5-schwarz","title":"Bassocontinuo Ultra Feet Level 5 Black","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 5 Black is an isolating device\/speaker foot designed for heavy electronic components such as power amps, with particularly dense damping material.\u003c\/p\u003e\n\n\u003cp\u003eLevel 5 Black is the top electronics tier of the Ultra Feet series and intended for the heaviest electronic components in the range. The damping density is correspondingly high, so that large, heavy chassis are reliably supported and decoupled at the same time.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 5 Black for?\u003c\/h2\u003e\n\u003cp\u003eLevel 5 Black is designed for electronics weighing 10.1 to 20 kg per foot – so heavy power amps or massive integrated amp chassis. For most normal integrated amps, this level is already too firm, where Level 3 or 4 gives better damping. Level 5 isn't intended for speakers – for those, there are the dedicated speaker Levels 6 and 7.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe right choice for the heavyweight electronic exceptions in your rack, but overkill for anything lighter. Checking the exact weight is especially worthwhile here.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Black (Level 5)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 10.1–20 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: electronics\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 350.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 450.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 5 Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight is Level 5 Black designed for?\u003c\/strong\u003e\u003cbr\u003eLevel 5 Black covers heavy electronics weighing 10.1 to 20 kg per foot, such as massive power amps or particularly heavy integrated amps. For normal integrated amps this is usually too much – Level 3 or 4 is a better fit there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Level 5 the heaviest electronics level?\u003c\/strong\u003e\u003cbr\u003eYes, Level 5 Black is the top tier for electronics in the Ultra Feet series. For even higher loads, as found with speakers, Bassocontinuo has Levels 6 and 7, purpose-built for that.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put Level 5 under a turntable?\u003c\/strong\u003e\u003cbr\u003eNot really directly – for turntables, Bassocontinuo offers Level 8, a level specifically tuned for that purpose. Level 5 is designed for heavy electronics chassis, not for the specific requirements of a turntable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does heavy electronics need a firmer level?\u003c\/strong\u003e\u003cbr\u003eThe heavier the device, the more a too-soft damping material would compress and lose its isolating effect. A denser material like Level 5 carries the weight without bottoming out, while continuing to damp effectively.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448263663952,"sku":null,"price":350.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448263696720,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-5-schwarz-isolationsfuss-lieferumfang.jpg?v=1787677459"},{"product_id":"bassocontinuo-ultra-feet-level-6-hellgrun","title":"Bassocontinuo Ultra Feet Level 6 Light Green","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 6 Light Green is an isolating device\/speaker foot developed specifically for speakers in the medium weight range, with correspondingly dense damping material.\u003c\/p\u003e\n\n\u003cp\u003eFrom Level 6 onward, the Ultra Feet series switches from electronics to speakers. Speakers bring different requirements than electronics: more weight and motor-related vibrations from the drivers themselves. Level 6 Light Green is tuned for the lower to medium weight range in speakers and is meant to absorb both floor-borne noise and driver feedback equally.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 6 Light Green for?\u003c\/h2\u003e\n\u003cp\u003eLevel 6 Light Green is designed for speakers weighing 5.1 to 25 kg per foot, so compact to medium-sized floorstanders and heavier bookshelf speakers. For very heavy floorstanders over 25 kg per foot, Level 7 Blue is the right choice, otherwise the material gets compressed too much and the damping suffers.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA sensible entry into the speaker levels for anything that isn't among the really heavy floorstanders. For borderline cases, better check the exact weight than guess.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Light Green (Level 6)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 5.1–25 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: speakers\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 480.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 4 Bassocontinuo Ultra Feet Level 6 Light Green\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers is Level 6 Light Green suitable for?\u003c\/strong\u003e\u003cbr\u003eLevel 6 Light Green is designed for speakers weighing 5.1 to 25 kg per foot, so compact to medium-sized floorstanders as well as heavier bookshelf speakers. For very heavy floorstanders, Level 7 Blue is the more suitable choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Level 6 also available as a set of 3?\u003c\/strong\u003e\u003cbr\u003eNo, Level 6 Light Green is documented by Bassocontinuo exclusively as a set of 4. This matches the usual practice of placing speakers on four points, rather than three as with smaller electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do speakers need different levels than electronics?\u003c\/strong\u003e\u003cbr\u003eSpeakers are usually heavier than electronic components and additionally generate vibrations from the drivers themselves, which act back into the cabinet. Speaker Levels 6 to 8 are tuned for exactly this interplay of weight and self-resonance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I put Level 6 under a subwoofer?\u003c\/strong\u003e\u003cbr\u003eThat depends on the subwoofer's weight. If it falls within the range of 5.1 to 25 kg per foot, Level 6 is generally a good fit; for heavier subwoofers, it's worth looking at Level 7. It's best to check the exact weight with us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 4","offer_id":53448263827792,"sku":null,"price":480.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-6-hellgruen-isolationsfuss-lieferumfang.jpg?v=1787677460"},{"product_id":"bassocontinuo-ultra-feet-level-7-blau","title":"Bassocontinuo Ultra Feet Level 7 Blue","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 7 Blue is an isolating device\/speaker foot developed for heavy floorstanding speakers, with particularly dense damping material.\u003c\/p\u003e\n\n\u003cp\u003eLevel 7 Blue is the second-highest speaker tier and intended for heavy to very heavy floorstanders. At this weight, the visco-elastic material needs to be noticeably denser than Level 6, so that it doesn't compress under the high load and the isolating effect is preserved.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 7 Blue for?\u003c\/h2\u003e\n\u003cp\u003eLevel 7 Blue is designed for speakers weighing 25.1 to 50 kg per foot – so large, heavy floorstanders. For compact or medium-sized speakers, this level is clearly oversized, where Level 6 gives noticeably better damping. Level 7 isn't intended for electronics.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe right choice for heavy floorstanding heavyweights, but not a universal foot for smaller models. If you're not sure of your speakers' weight, clarify it before buying.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Blue (Level 7)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 25.1–50 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: speakers\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 580.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 4 Bassocontinuo Ultra Feet Level 7 Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers is Level 7 Blue intended for?\u003c\/strong\u003e\u003cbr\u003eLevel 7 Blue is designed for heavy floorstanding speakers weighing 25.1 to 50 kg per foot. For lighter floorstanders or bookshelf speakers, Level 6 Light Green is the better-fitting, less firm choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Level 7 also suitable for bookshelf speakers?\u003c\/strong\u003e\u003cbr\u003eUsually not, since bookshelf speakers rarely reach the 25.1 to 50 kg per foot range. For them, Level 6 Light Green or even a lower level is usually the more accurate choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is Level 7 available only as a set of 4?\u003c\/strong\u003e\u003cbr\u003eSpeakers practically always stand on four points, which is why Bassocontinuo documents Level 7 exclusively as a set of 4. A set of 3 would be unusual for this application and isn't offered for this level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I find out my speakers' weight per foot?\u003c\/strong\u003e\u003cbr\u003eThe simplest way is via the total weight from the datasheet, divided by four stand points. In case of uneven weight distribution or uncertainty, HD Zürisee is happy to help you assess which level fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 4","offer_id":53448264057168,"sku":null,"price":580.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-7-blau-isolationsfuss-lieferumfang.jpg?v=1787677460"},{"product_id":"bassocontinuo-ultra-feet-level-8-orange","title":"Bassocontinuo Ultra Feet Level 8 Orange","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Level 8 Orange is an isolating device\/speaker foot developed specifically for turntables, with damping material tuned to that application.\u003c\/p\u003e\n\n\u003cp\u003eLevel 8 Orange is the only level in the series developed specifically for turntables. For a turntable, it's not just isolation from footfall and floor vibrations that matters, but also mechanical calm during playback, so that motor and external vibrations don't reach the stylus tracking.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Level 8 Orange for?\u003c\/h2\u003e\n\u003cp\u003eLevel 8 Orange covers a wide range from 0 to 20 kg per foot and therefore fits most turntables, from light entry-level decks to heavier mass-loaded ones. It's not intended for electronics or speakers – there, the levels designed for that, 1 to 7, give better results.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe obvious choice when a turntable should stand more calmly, with a wide weight range that covers most decks. For very heavy high-end chassis, it's worth checking with us beforehand.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Orange (Level 8)\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 0–20 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: visco-elastic damping materials of varying density\u003c\/li\u003e\n\u003cli\u003eApplication: turntables\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 280.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 350.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Level 8 Orange\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich turntables is Level 8 Orange suitable for?\u003c\/strong\u003e\u003cbr\u003eLevel 8 Orange covers a weight range of 0 to 20 kg per foot and therefore fits most turntables, from light entry-level models to heavier mass-loaded decks. For very heavy custom builds, a quick query beforehand is worthwhile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a dedicated level just for turntables?\u003c\/strong\u003e\u003cbr\u003eA turntable is particularly sensitive to footfall and vibration during playback, unlike pure electronics. Level 8 is tuned for exactly this interplay of weight and mechanical calm, rather than just load-bearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I also put Level 8 under a CD player?\u003c\/strong\u003e\u003cbr\u003eThat's possible too, but for pure electronics one of Levels 1 to 5, tuned to electronics weights, makes more sense. Level 8 is developed specifically for the requirements of a turntable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a set of 3 enough for my turntable?\u003c\/strong\u003e\u003cbr\u003eMost turntables stand stably on three feet, which is why a set of 3 is the usual choice. For decks with four stand points, or where extra stability is desired, a set of 4 is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448264155472,"sku":null,"price":280.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448264188240,"sku":null,"price":350.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-level-8-orange-isolationsfuss-lieferumfang.jpg?v=1787677460"},{"product_id":"bassocontinuo-ultra-feet-spike-c-kupfer","title":"Bassocontinuo Ultra Feet Spike C Copper","description":"\u003cp\u003eThe Bassocontinuo Ultra Feet Spike C Copper is an isolating device\/speaker foot that, as an adjustable copper spike with replaceable damping elements, absorbs vibrations from the floor and motor.\u003c\/p\u003e\n\n\u003cp\u003eSpike C is the more advanced variant within the Ultra Feet family: instead of a pure damping pad made from visco-elastic material, it combines a height-adjustable copper spike with replaceable damping elements. This allows finer adaptation to the surface and weight, especially where turntables and speakers share the same room.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the Spike C Copper for?\u003c\/h2\u003e\n\u003cp\u003eSpike C Copper is designed for devices weighing 10.1 to 20 kg per foot and is aimed at turntables and speakers in this weight range that benefit from an adjustable, precise setup. For very light electronics, this spike is overkill – there, the simpler Ultra Feet Levels 1 to 3 are the more economical and suitable choice.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA well-thought-out accessory for anyone who values fine mechanical adjustability alongside pure damping, for example to align a turntable exactly. For standard applications with no need for adjustment, a regular Ultra Feet level does just as well.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eColour\/level: Copper \/ Spike C\u003c\/li\u003e\n\u003cli\u003eLoad range per foot: 10.1–20 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: adjustable copper spike with replaceable visco-elastic damping elements\u003c\/li\u003e\n\u003cli\u003eApplication: turntables and speakers\u003c\/li\u003e\n\u003cli\u003ePrice set of 3: CHF 255.00\u003c\/li\u003e\n\u003cli\u003ePrice set of 4: CHF 295.00\u003c\/li\u003e\n\u003cli\u003eScope of delivery: set of 3 Bassocontinuo Ultra Feet Spike C Copper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between Spike C Copper and the numbered Ultra Feet levels?\u003c\/strong\u003e\u003cbr\u003eThe numbered levels are pure damping pads made from visco-elastic material at various densities. Spike C Copper is an adjustable copper spike with replaceable damping elements that additionally allows fine height adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat weight is Spike C Copper designed for?\u003c\/strong\u003e\u003cbr\u003eSpike C Copper is designed for 10.1 to 20 kg per foot, suitable for many turntables and speakers in this range. For very light devices, a simpler, more affordable Ultra Feet level is usually the more sensible choice.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I replace the damping elements of Spike C later?\u003c\/strong\u003e\u003cbr\u003eYes, that's one of the advantages of this model: the damping elements are replaceable and can be swapped out as needed, without replacing the whole spike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs Spike C also suitable for fine-tuning a turntable?\u003c\/strong\u003e\u003cbr\u003eYes, thanks to the height adjustability, a turntable can be levelled precisely with Spike C Copper, which contributes to mechanical calm especially with sensitive decks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy Bassocontinuo Ultra Feet from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil gives you personal advice on which level suits your device and weight. Maurizio Nardiello knows the finer points of setup, and we bring years of experience in hi-fi specialist retail since 1997. Call us at +41 44 680 22 00, message us on WhatsApp at 076 534 22 00, or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAlready have a Bassocontinuo rack, or thinking about one? Ultra Feet can be freely combined – check out \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003emore Bassocontinuo racks \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bassocontinuo","offers":[{"title":"Set von 3","offer_id":53448264515920,"sku":null,"price":255.0,"currency_code":"CHF","in_stock":true},{"title":"Set von 4","offer_id":53448264548688,"sku":null,"price":295.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-ultra-feet-spike-c-kupfer-lieferumfang.png?v=1788530397"},{"product_id":"bassocontinuo-reference-line-dsd-untersetzer","title":"Bassocontinuo Reference Line DSD Isolation Pucks","description":"\u003cp\u003eThe Bassocontinuo Reference Line DSD Isolation Puck is a stainless steel puck with built-in elastomer vibration damping that specifically decouples equipment from its surface instead of just supporting it.\u003c\/p\u003e\n\n\u003cp\u003eUnlike a simple washer, the DSD Isolation Puck works on the same principle as the base plates of the Reference Line racks: an elastomer layer between two stainless steel discs mechanically absorbs vibrations instead of simply passing them through. The box contains four pieces – enough for one device on four feet. At HD Zürisee in Wädenswil, we also use the same DSD technology in the complete Reference Line racks; the puck brings it in a small format to existing furniture or directly under individual devices.\u003c\/p\u003e\n\n\u003ch2\u003eWho is the DSD Isolation Puck for?\u003c\/h2\u003e\n\u003cp\u003eThe DSD Isolation Puck suits anyone who wants to specifically decouple a single device – amplifier, turntable, streamer – without buying a complete rack straight away. If you already own a Reference Line rack, the decoupling is already built in there, and you'd need the set at most for a second device.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small but seriously engineered accessory: real elastomer decoupling instead of a token rubber foot, using the same technology as the large Reference Line racks.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: DSD isolation puck with elastomer vibration damping\u003c\/li\u003e\n\u003cli\u003eStructure: stainless steel\u003c\/li\u003e\n\u003cli\u003eDecoupling: elastomer layer between two stainless steel discs (DSD principle)\u003c\/li\u003e\n\u003cli\u003ePackaging unit: box of 4\u003c\/li\u003e\n\u003cli\u003ePrice: CHF 95 (box of 4)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1x box of 4 DSD isolation pucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the DSD Isolation Puck and a normal equipment foot?\u003c\/strong\u003e\u003cbr\u003eThe puck contains an elastomer layer between two stainless steel discs that mechanically absorbs vibrations – the same DSD principle as in the base plates of the Reference Line racks. A simple rubber disc or a spike doesn't offer this defined damping effect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many pucks do I need for one device?\u003c\/strong\u003e\u003cbr\u003eThe box contains four pieces, which is enough for one device on four feet. For devices with three feet or for a second device, you'll need another box accordingly – just tell us how many devices you want to decouple.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I also place the DSD Isolation Puck under heavy power amplifiers?\u003c\/strong\u003e\u003cbr\u003eYes, the stainless steel construction is designed for the loads also found in the Reference Line racks. For very heavy monoblocks, though, we're happy to also advise you on a suitable rack solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Bassocontinuo Reference Line DSD Isolation Puck at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eHD Zürisee in Wädenswil advises you personally on placement, room and the right system combination, Maurizio Nardiello takes care of technology and installation, and we bring decades of experience in specialist hi-fi retail since 1997. Contact: +41 44 680 22 00, WhatsApp 076 534 22 00, shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find more Bassocontinuo racks and accessories in our \u003ca href=\"\/en\/collections\/bassocontinuo\"\u003efurther Bassocontinuo accessories\u003c\/a\u003e overview.\u003c\/p\u003e\n\n","brand":"Bassocontinuo","offers":[{"title":"Default","offer_id":53448272675152,"sku":null,"price":95.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bassocontinuo-reference-line-dsd-untersetzer-lieferumfang.jpg?v=1788552232"},{"product_id":"bfly-audio-flatline-geraetebasis","title":"bFly-Audio FlatLine – Flat Device Base","description":"\u003cp\u003eThe bFly-Audio FlatLine is a device base for equipment and speakers that still fits into especially shallow racks, lowboards or wall units.\u003c\/p\u003e\n\u003cp\u003eWhere other bases fail on build height, the FlatLine brings bFly-audio's proven absorber technology down to 22 to 30 mm – for spots where a normal base simply doesn't fit anymore.\u003c\/p\u003e\n\u003ch2\u003eWhy the FlatLine?\u003c\/h2\u003e\n\u003cp\u003eAt the core of the FlatLine is the special 3LPW wood: three layers of different chip density, fine on the outside, coarser in the middle, fine again underneath. This uneven distribution dampens vibrations across a broad range – the actual trick behind a base that needs so little height to do it.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eCalmer bass, clearer mids, less blur in the sound – the same effect larger bFly bases deliver, just in places where there simply wasn't room for decoupling before. Small in footprint, not in result.\u003c\/p\u003e\n\u003ch3\u003eWho is the FlatLine for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal for equipment and bookshelf speakers in a sideboard, rack or under the TV, where every millimetre counts. Bottom line: for heavy floorstanding speakers or packed racks, BaseOne or BaseTwo are the better fit – the FlatLine carries up to 75 kg, no more. The Basic feet deliver solid cork-rubber decoupling, while the PLUS feet get noticeably more precision out of their extra polymer gel layer.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe FlatLine solves a very real living-room problem: too little height for too much ambition. If you've held off on decoupling because a base wouldn't fit under the shelf, this is your solution – without compromising on sound. Which size and foot version fits your device is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e device base for equipment and speakers, low-profile design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e special 3LPW wood (3-layer, varying chip density)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e Basic feet 22 mm · PLUS feet 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e up to 75 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e Basic (ring of cork-rubber granulate) or PLUS (extra polymer gel layer), not height-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e S 25×30 cm and S\/M 25×35 cm only with PLUS feet · M 44×35 cm, L 50×40 cm, XL 56×46 cm with Basic or PLUS feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 device base incl. selected feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size does my speaker or device need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the footprint and compare it with our five sizes from S (25×30 cm) to XL (56×46 cm). The FlatLine carries up to 75 kg – for heavier floorstanding speakers or full racks we recommend BaseOne or BaseTwo. If you're unsure, just give us a call and we'll work it out together.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between Basic and PLUS feet?\u003c\/h3\u003e\n\u003cp\u003eBoth versions have a ring of cork-rubber granulate; the PLUS feet add a soft polymer gel layer on top. The result is more precise, more natural decoupling – audible, but subtle, not a night-and-day difference.\u003c\/p\u003e\n\u003ch3\u003eWhy are sizes S and S\/M only available with PLUS feet?\u003c\/h3\u003e\n\u003cp\u003eIn our view, only the better absorber stage is worthwhile for the compact formats, which is why we offer S and S\/M exclusively with PLUS feet. From size M upward you can choose freely between Basic and PLUS, whatever suits your budget.\u003c\/p\u003e\n\u003ch3\u003eCan I get the FlatLine height-adjustable?\u003c\/h3\u003e\n\u003cp\u003eNo, the FlatLine is deliberately not height-adjustable – that's what lets it stay so low, at 22 to 30 mm. If you need height compensation for an uneven surface, the BaseOne with adjustable feet is the better fit.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio FlatLine at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe work out with you which size and foot version fits your rack and your equipment – based on years of practice in Wädenswil. Get in touch by phone, email or WhatsApp, we're happy to advise you regardless of budget.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore bases and absorber feet can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching racks and sideboards under \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi Furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"S \/ PLUS","offer_id":53486831403344,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true},{"title":"S\/M \/ PLUS","offer_id":53486831436112,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"M \/ Basic","offer_id":53486831468880,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"M \/ PLUS","offer_id":53486831501648,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"L \/ Basic","offer_id":53486831534416,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"L \/ PLUS","offer_id":53486831567184,"sku":null,"price":339.0,"currency_code":"CHF","in_stock":true},{"title":"XL \/ Basic","offer_id":53486831599952,"sku":null,"price":289.0,"currency_code":"CHF","in_stock":true},{"title":"XL \/ PLUS","offer_id":53486831632720,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-flatline-flache-geraetebasis-schraegansicht.png?v=1788009644"},{"product_id":"bfly-audio-baseone-geraetebasis","title":"bFly-Audio BaseOne – Birch Device Base","description":"\u003cp\u003eThe bFly-Audio BaseOne is a device base made of birch multiplex wood that noticeably decouples equipment and speakers from the surface below.\u003c\/p\u003e\n\u003cp\u003eAt bFly-audio it's considered the success story of the series – no coincidence, since the high air content of birch wood already delivers excellent vibration damping in its raw state, before an absorber foot even comes into play.\u003c\/p\u003e\n\u003ch2\u003eWhy the BaseOne?\u003c\/h2\u003e\n\u003cp\u003eBirch multiplex is light, stiff, and still damps well – a material combination that has proven itself in practice for years. This is complemented by bFly-audio's MLA absorber feet, available in your choice of standard or the improved PRO version: the PRO feet have an extra seal on the underside that provides horizontal stability and an additional absorber layer.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calmer sound with a clear, stable soundstage, less diffuse mids, more contour in the low end. Especially noticeable on springy parquet or floorboards, where the decoupling makes a clear difference.\u003c\/p\u003e\n\u003ch3\u003eWho is the BaseOne for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal if you want to noticeably calm down your equipment or speakers without jumping straight to the reference class. Bottom line: if you want to push what's technically possible to the limit, the StoneLine or BaseTwo is the more consistent choice – the BaseOne is the solid, affordable entry into real decoupling, not the maximum.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe BaseOne does exactly what a bestseller should: it delivers an audible, tangible step forward without making you fit a second piece of furniture into your living room. Which size and foot version fits your device is something we're happy to work out together with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e device base for equipment and speakers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e birch multiplex board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 53 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e height-adjustable, Standard or PRO (with extra seal and absorber layer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e S 25×30 cm, M 44×35 cm, L 50×40 cm, XL 56×46 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 device base incl. selected feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does birch multiplex offer compared to other materials?\u003c\/h3\u003e\n\u003cp\u003eThe high air content in birch wood provides good vibration damping even without any extra measures, at low weight and high stiffness. Combined with the MLA absorber feet, that adds up to a well-rounded, coherent base.\u003c\/p\u003e\n\u003ch3\u003eIs the PRO version of the feet worth it?\u003c\/h3\u003e\n\u003cp\u003eIf you want that last bit of calm, yes: the PRO feet add an extra seal, more horizontal stability and an additional absorber layer. For a noticeable entry point, the standard version is entirely sufficient.\u003c\/p\u003e\n\u003ch3\u003eWhat size fits my speaker?\u003c\/h3\u003e\n\u003cp\u003eMeasure your device's footprint and choose the next size up – between S (25×30 cm) and XL (56×46 cm) you'll find a fitting size for most floorstanding speakers and racks. If you're unsure, we're happy to advise you by phone.\u003c\/p\u003e\n\u003ch3\u003eCan I put the BaseOne under a heavy tube amplifier?\u003c\/h3\u003e\n\u003cp\u003eYes, the height-adjustable feet also compensate for uneven floors and reliably carry the weight of the equipment. For especially heavy power amps we recommend choosing the larger size, so the base doesn't reach its edge.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio BaseOne at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe work out with you whether the BaseOne is enough for your room and your equipment, or whether stepping up to the StoneLine is worthwhile – based on years of experience in our store in Wädenswil. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore bases and absorber feet can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching racks under \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi Furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"S \/ Standard","offer_id":53486832025936,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"S \/ PRO","offer_id":53486832058704,"sku":null,"price":439.0,"currency_code":"CHF","in_stock":true},{"title":"M \/ Standard","offer_id":53486832091472,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true},{"title":"M \/ PRO","offer_id":53486832124240,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true},{"title":"L \/ Standard","offer_id":53486832157008,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true},{"title":"L \/ PRO","offer_id":53486832189776,"sku":null,"price":629.0,"currency_code":"CHF","in_stock":true},{"title":"XL \/ Standard","offer_id":53486832222544,"sku":null,"price":599.0,"currency_code":"CHF","in_stock":true},{"title":"XL \/ PRO","offer_id":53486832255312,"sku":null,"price":709.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-baseone-geraetebasis-schraegansicht.png?v=1788010759"},{"product_id":"bfly-audio-basetwo-geraetebasis","title":"bFly-Audio BaseTwo – Device Base with PRO Feet","description":"\u003cp\u003eThe bFly-Audio BaseTwo is a device base with an anodised aluminium plate that's considered the price-performance highlight of the bFly-audio series.\u003c\/p\u003e\n\u003cp\u003eIt already comes standard with the improved PRO feet – with the BaseTwo, the better absorber stage isn't a paid upgrade, it's included from the start.\u003c\/p\u003e\n\u003ch2\u003eWhy the BaseTwo?\u003c\/h2\u003e\n\u003cp\u003eThe aluminium plate on top is spiral-bonded to the wooden body. This polymer bond acts as an additional absorber in its own right and is why the BaseTwo achieves better dynamics and a more detailed sound than the BaseOne.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMore resolution in fine details, tighter, more defined bass, and an overall livelier presentation – without the system sounding edgy or analytical.\u003c\/p\u003e\n\u003ch3\u003eWho is the BaseTwo for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to take a noticeable step beyond the solid BaseOne entry point without jumping straight to the StoneLine reference class. Bottom line: if you're after maximum decoupling and have the budget for it, StoneLine or PowerBase serve you better – the BaseTwo is the bestseller for good reason, but not the technical pinnacle of the series.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe BaseTwo hits the sweet spot where price and effect come together most cleanly – that's why it's bFly-audio's bestseller, and why it's in our range too. Which size fits your device is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e device base for equipment and speakers, standard with PRO feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e wood body with anodised aluminium plate, spiral-bonded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 56 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Black or Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e PRO, height-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e S 25×30 cm, M 44×35 cm, L 50×40 cm, XL 56×46 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 device base incl. PRO feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does the BaseTwo come standard with PRO feet?\u003c\/h3\u003e\n\u003cp\u003eBecause bFly-audio sets a single, high standard for this model instead of offering an entry-level variant. So you don't have to weigh up Standard versus PRO – the better absorber stage is already included in the price.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between Black and Natural?\u003c\/h3\u003e\n\u003cp\u003eThese are purely two visual variants of the wood surface beneath the aluminium plate, identical in sound. So the choice comes down to what suits your furniture and room better.\u003c\/p\u003e\n\u003ch3\u003eIs the BaseTwo enough for a heavy tube amplifier?\u003c\/h3\u003e\n\u003cp\u003eFor most tube devices and floorstanding speakers, yes, especially in the larger L and XL sizes. For very heavy power amps, we recommend checking footprint and weight with us before buying.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference to the BaseOne?\u003c\/h3\u003e\n\u003cp\u003eThe BaseOne has a pure wood body with optional PRO feet, while the BaseTwo also adds the spiral-bonded aluminium plate and always ships with PRO feet. That shows up as more dynamics and detail resolution – the classic next step up.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio BaseTwo at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eAs the bestseller of the series, we specifically ask what you want to audibly improve, so you don't buy more base than you need – or too little. Get in touch by phone, email or WhatsApp, we give you independent advice from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore bases and absorber feet can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching racks under \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi Furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Schwarz \/ S","offer_id":53486833303888,"sku":null,"price":639.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M","offer_id":53486833336656,"sku":null,"price":739.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L","offer_id":53486833369424,"sku":null,"price":929.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL","offer_id":53486833402192,"sku":null,"price":1139.0,"currency_code":"CHF","in_stock":true},{"title":"Natur \/ S","offer_id":53486833434960,"sku":null,"price":639.0,"currency_code":"CHF","in_stock":true},{"title":"Natur \/ M","offer_id":53486833467728,"sku":null,"price":739.0,"currency_code":"CHF","in_stock":true},{"title":"Natur \/ L","offer_id":53486833500496,"sku":null,"price":929.0,"currency_code":"CHF","in_stock":true},{"title":"Natur \/ XL","offer_id":53486833533264,"sku":null,"price":1139.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-basetwo-geraetebasis-mit-pro-fuessen-schraegansicht.png?v=1788010881"},{"product_id":"bfly-audio-stoneline-geraetebasis","title":"bFly-Audio StoneLine – Reference-Class Device Base","description":"\u003cp\u003eThe bFly-Audio StoneLine is a reference-class device base made from a composite of fine-grained mineral stone and synthetic resin.\u003c\/p\u003e\n\u003cp\u003eIt's bFly-audio's most uncompromising answer to the question of how far decoupling can be pushed when material and effort don't have to make compromises – for equipment just as much as for speakers.\u003c\/p\u003e\n\u003ch2\u003eWhy the StoneLine?\u003c\/h2\u003e\n\u003cp\u003eThe homogeneous composition of the mineral stone and resin composite delivers highly effective decoupling. The plate rests on elaborately engineered feet modelled on the proven PURE absorbers: a Sorbothane ring encloses a damping air chamber between two aluminium discs, and a special gel pad on the underside additionally lets the other materials unfold their effect optimally. The anodised aluminium plate on top is spiral-applied with a soft polymer and itself acts as a mechanical and electromagnetic insulator and shield.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA noticeably calmer, more stable soundstage, more fine resolution, and bass that no longer blurs into the surface below. The difference to simpler bases is no longer a nuance here, but generally clearly audible.\u003c\/p\u003e\n\u003ch3\u003eWho is the StoneLine for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to leave nothing to chance with decoupling and is ready to invest in the reference class for it. Bottom line: if you're just starting out with decoupling, BaseOne or BaseTwo serve you better – the StoneLine is the last step, not the first, and should be used on an already cleanly built-up chain so the effort pays off.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eWith the TWIN version, where a second stone plate is added on top, bFly-audio goes one step further following its own MLA principle – if you want the maximum, this is where you find it. Honestly: this is reference class with the price to match, but built exactly for that. Which size, colour and version fits your system is something we're happy to work out together with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e reference-class device base for equipment and speakers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e composite of mineral stone and synthetic resin, anodised aluminium plate on top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e Sorbothane ring with enclosed air chamber between two aluminium discs, gel pad on the underside, not height-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Volcano Black, Concrete Grey or Rose Quartz (at extra cost)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Standard or TWIN (second stone plate for even more effect)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e S\/M 25×35 cm, M 44×35 cm, L 50×40 cm, XL 56×46 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 device base in your chosen colour and version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does the TWIN version add over the standard version?\u003c\/h3\u003e\n\u003cp\u003eWith TWIN, bFly-audio places a second stone plate on top of the first, so you effectively get a double StoneLine. That noticeably boosts the decoupling effect further, following the MLA principle, though it's noticeable in the price too.\u003c\/p\u003e\n\u003ch3\u003eWhy does Rose Quartz cost more than Volcano Black or Concrete Grey?\u003c\/h3\u003e\n\u003cp\u003eRose Quartz is a more elaborate, higher-grade stone in the composite mix than the two standard colours, which are priced the same. The surcharge reflects the material cost, not just the look.\u003c\/p\u003e\n\u003ch3\u003eIs the StoneLine worthwhile for speakers or only for equipment?\u003c\/h3\u003e\n\u003cp\u003eBoth – according to bFly-audio, the StoneLine is equally suited to equipment and speakers. On heavy floorstanding speakers, the stable, highly effective decoupling is especially noticeable.\u003c\/p\u003e\n\u003ch3\u003eDo I have to go straight for TWIN to hear a difference?\u003c\/h3\u003e\n\u003cp\u003eNo, even the standard version is clearly a step up in sound over BaseOne and BaseTwo. TWIN is the step for anyone who's already convinced by the standard StoneLine and wants that last bit more.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio StoneLine at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eFor an investment of this size, we give you thorough advice on whether the step is really worth it for your chain – honest feedback instead of sales pressure, from our experience in Wädenswil. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore bases and absorber feet can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching floorstanding speakers under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding Speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Vulkan-Schwarz \/ S\/M \/ Standard","offer_id":53486835564880,"sku":null,"price":709.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ S\/M \/ TWIN","offer_id":53486835597648,"sku":null,"price":1139.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ M \/ Standard","offer_id":53486835630416,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ M \/ TWIN","offer_id":53486835663184,"sku":null,"price":1379.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ L \/ Standard","offer_id":53486835695952,"sku":null,"price":1069.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ L \/ TWIN","offer_id":53486835728720,"sku":null,"price":1899.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ XL \/ Standard","offer_id":53486835761488,"sku":null,"price":1399.0,"currency_code":"CHF","in_stock":true},{"title":"Vulkan-Schwarz \/ XL \/ TWIN","offer_id":53486835794256,"sku":null,"price":2309.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ S\/M \/ Standard","offer_id":53486835827024,"sku":null,"price":709.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ S\/M \/ TWIN","offer_id":53486835859792,"sku":null,"price":1139.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ M \/ Standard","offer_id":53486835892560,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ M \/ TWIN","offer_id":53486835925328,"sku":null,"price":1379.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ L \/ Standard","offer_id":53486835958096,"sku":null,"price":1069.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ L \/ TWIN","offer_id":53486835990864,"sku":null,"price":1899.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ XL \/ Standard","offer_id":53486836023632,"sku":null,"price":1399.0,"currency_code":"CHF","in_stock":true},{"title":"Beton-Grau \/ XL \/ TWIN","offer_id":53486836056400,"sku":null,"price":2309.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ S\/M \/ Standard","offer_id":53486836089168,"sku":null,"price":1129.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ S\/M \/ TWIN","offer_id":53486836121936,"sku":null,"price":1629.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ M \/ Standard","offer_id":53486836154704,"sku":null,"price":1269.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ M \/ TWIN","offer_id":53486836187472,"sku":null,"price":2299.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ L \/ Standard","offer_id":53486836220240,"sku":null,"price":1649.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ L \/ TWIN","offer_id":53486836253008,"sku":null,"price":3199.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ XL \/ Standard","offer_id":53486836285776,"sku":null,"price":1899.0,"currency_code":"CHF","in_stock":true},{"title":"Rosen-Quarz \/ XL \/ TWIN","offer_id":53486836318544,"sku":null,"price":3849.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-stoneline-geraetebasis-referenzklasse-3-farben-frontansicht.png?v=1788010984"},{"product_id":"bfly-audio-powerbase-geraetebasis","title":"bFly-Audio PowerBase – Device Base with Grounding","description":"\u003cp\u003eThe bFly-Audio PowerBase is a device base with a bamboo core that additionally drains electrosmog from your equipment via a grounding module.\u003c\/p\u003e\n\u003cp\u003eIt combines two topics that are often handled separately in practice: mechanical decoupling and electrical interference from high-frequency radiation from WiFi, phones and the electronics themselves.\u003c\/p\u003e\n\u003ch2\u003eWhy the PowerBase?\u003c\/h2\u003e\n\u003cp\u003eAt its core is a three-layer bamboo build, a material with remarkably good audiophile properties. The standard feet are the PRO feet, with a total of four integrated absorber layers of Sorbothane, rubber and two differently thick layers of the proven cork-rubber granulate. But the real highlight sits on the underside: an aluminium plate connected via a grounding module to a grounded wall socket, draining off high-frequency interference that would otherwise cloud your sound.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eAlongside the familiar bFly calm from the PRO feet, users in specialist tests report an additional, clearly audible reduction in electrosmog effects – finer resolution, less background noise floor, a cleaner soundstage.\u003c\/p\u003e\n\u003ch3\u003eWho is the PowerBase for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eEspecially worthwhile for source components, DACs and preamps in rooms with heavy WiFi and radio exposure, where interference is a real issue. Bottom line: if you're after pure mechanical decoupling without the grounding function, the cheaper BaseTwo does the job too – the PowerBase's grounding module is a genuine bonus, but not a must for every system.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PowerBase won an award from IMAGE HIFI in 2016 – rightly so, since the combination of bamboo core, PRO feet and grounding module is rare in this form. If you already have a fully dialed-in chain and are still chasing that last bit of noise, you'll find a very effective base here. We're happy to walk you through how to connect the grounding module correctly at HD Zürisee in Wädenswil, no rush.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e device base with grounding module against electrosmog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e three-layer bamboo core, aluminium plate on the underside (grounding connection)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Black or Natural Bamboo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e PRO, 4 integrated absorber layers (Sorbothane, rubber, 2× cork-rubber granulate), height-adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e S 25×30 cm, M 44×35 cm, L 50×40 cm, XL 56×46 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAward:\u003c\/strong\u003e IMAGE HIFI Award 2016\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 device base incl. PRO feet and grounding module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the PowerBase's grounding module work?\u003c\/h3\u003e\n\u003cp\u003eThe aluminium plate on the underside is connected via a cable with a grounding module to a normal grounded wall socket. High-frequency radiation that accumulates on your equipment is drained off in a controlled way, instead of showing up in the sound.\u003c\/p\u003e\n\u003ch3\u003eDo I need an electrician for the grounding?\u003c\/h3\u003e\n\u003cp\u003eNo, the connection is made via an ordinary grounded socket and requires no installation. If you have questions about correct handling, we're happy to show you directly at our store.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference to the BaseTwo?\u003c\/h3\u003e\n\u003cp\u003eThe BaseTwo offers the same mechanical concept with aluminium plate and PRO feet, but without the grounding function. The PowerBase combines that with the additional grounding module against electrosmog – which is why it's priced accordingly higher.\u003c\/p\u003e\n\u003ch3\u003eWhich devices benefit most from the PowerBase?\u003c\/h3\u003e\n\u003cp\u003eSensitive source components such as DACs, streamers and preamps that react to interference signals benefit the most. On pure power amps without digital signal processing, the effect is generally smaller.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio PowerBase at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe look together with you at whether the grounding module really helps in your setup before you invest – honest assessment instead of sales pressure, from our experience in Wädenswil. Call, write, or reach us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore bases and absorber feet can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching mains filters under \u003ca href=\"\/en\/collections\/strom-optimierung\"\u003ePower Optimisation\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Schwarz \/ S","offer_id":53486836842832,"sku":null,"price":959.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M","offer_id":53486836875600,"sku":null,"price":1189.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L","offer_id":53486836908368,"sku":null,"price":1469.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL","offer_id":53486836941136,"sku":null,"price":1699.0,"currency_code":"CHF","in_stock":true},{"title":"Bambus natur \/ S","offer_id":53486836973904,"sku":null,"price":959.0,"currency_code":"CHF","in_stock":true},{"title":"Bambus natur \/ M","offer_id":53486837006672,"sku":null,"price":1189.0,"currency_code":"CHF","in_stock":true},{"title":"Bambus natur \/ L","offer_id":53486837039440,"sku":null,"price":1469.0,"currency_code":"CHF","in_stock":true},{"title":"Bambus natur \/ XL","offer_id":53486837072208,"sku":null,"price":1699.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-powerbase-geraetebasis-mit-erdung-kantenvergleich-detailansicht.png?v=1788011047"},{"product_id":"bfly-audio-absorberbasis-thorens-linn","title":"bFly-Audio Absorber Base – for Thorens \u0026 Linn","description":"\u003cp\u003eThe bFly-Audio Absorber Base is a custom-built decoupling base for Thorens and Linn turntables that specifically calms the often unstable original plinth of these decks.\u003c\/p\u003e\n\u003cp\u003eInstead of a universal base, bFly-audio has developed its own precisely fitted construction for each model here – the turntable is simply placed into the base, and on some models you only need to remove the original feet.\u003c\/p\u003e\n\u003ch2\u003eWhy the Absorber Base?\u003c\/h2\u003e\n\u003cp\u003eOn top sit five elaborately made absorber elements following a 2-level principle: the deck itself stands on four absorbers, while a fifth sits centrally and specifically calms the often unstable original base plate. Especially on the 300 series Thorens models with their sheet-metal chassis pan, the base can fully play out its potential this way. Optional height-adjustable PRO feet, with an additional seal on the underside, add a further absorber level and more horizontal stability.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eExtensive listening comparisons showed a striking effect: a more clearly defined, wider soundstage, sharper contours on singers and instruments, and an overall noticeably greater calm and stability in the sound.\u003c\/p\u003e\n\u003ch3\u003eWho is the Absorber Base for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003ePerfect if you own a Thorens TD320\/321\/318\/316, TD160\/166\/165\/145\/146 or a Linn LP12\/Majik and want to get the most out of its original plinth. Bottom line: no matching version exists for other turntable models – it's worth a quick check upfront to see whether your deck is on the list before you order.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA tuning specialist developing a base exactly for your deck instead of offering a universal solution is rare – and that's exactly what makes the Absorber Base so effective. Which model and foot version fits your turntable is something we're happy to check together with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e custom-built absorber base for turntables, 2-level absorption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 5 absorber elements (4 load-bearing, 1 central for the base plate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e optional height-adjustable PRO feet with additional absorber level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModels:\u003c\/strong\u003e xPLTH3 for Thorens TD320\/321\/318\/316 and others · xPLTH16 for Thorens TD160\/166\/165\/145\/146 and others · LBase for Linn LP12 and Majik\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 absorber base for the chosen model incl. chosen feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich model fits my turntable?\u003c\/h3\u003e\n\u003cp\u003exPLTH3 fits the Thorens 300 series models such as TD320, 321, 318 and 316, xPLTH16 fits the 160 and 140 series models such as TD160, 166, 165, 145 and 146. For the Linn LP12 and Majik you take the LBase. If you're unsure, just tell us your exact model.\u003c\/p\u003e\n\u003ch3\u003eDo I need to modify anything on the turntable for installation?\u003c\/h3\u003e\n\u003cp\u003eOn most models you simply place the deck into the base; on some you only need to remove the original feet beforehand. No modification to the chassis or tonearm is needed.\u003c\/p\u003e\n\u003ch3\u003eAre the optional PRO feet worth it?\u003c\/h3\u003e\n\u003cp\u003eIf you want even more stability and detail resolution on top of the 2-level absorption, yes: the PRO feet add an extra seal and a further absorber level. For the entry point, the basic version is entirely sufficient.\u003c\/p\u003e\n\u003ch3\u003eDoes the Absorber Base work with turntables other than Thorens or Linn?\u003c\/h3\u003e\n\u003cp\u003eNo, the base is specifically built for the named Thorens and Linn models and, by design, doesn't fit other decks. For other brands, we're happy to advise you on suitable alternatives from our range.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Absorber Base at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe check with you whether your exact model matches the list before you order – saving you an unnecessary return. Get in touch by phone, email or WhatsApp, we know our way around Thorens and Linn well.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore turntable accessories can be found under \u003ca href=\"\/en\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e, more bases under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"xPLTH3 (Thorens TD300er) \/ Basic","offer_id":53486838284624,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"xPLTH3 (Thorens TD300er) \/ PRO","offer_id":53486838317392,"sku":null,"price":429.0,"currency_code":"CHF","in_stock":true},{"title":"xPLTH16 (Thorens TD160er\/140er) \/ Basic","offer_id":53486838350160,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"xPLTH16 (Thorens TD160er\/140er) \/ PRO","offer_id":53486838382928,"sku":null,"price":429.0,"currency_code":"CHF","in_stock":true},{"title":"LBase (Linn LP12 \u0026 Majik) \/ Basic","offer_id":53486838415696,"sku":null,"price":439.0,"currency_code":"CHF","in_stock":true},{"title":"LBase (Linn LP12 \u0026 Majik) \/ PRO","offer_id":53486838448464,"sku":null,"price":519.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-absorberbasis-lbase-fuer-linn-lp12-schraegansicht.png?v=1788011251"},{"product_id":"bfly-audio-pure-tube-absorber-set","title":"bFly-Audio Pure-Tube – Device Absorber for Tube Amplifiers","description":"\u003cp\u003eThe bFly-Audio Pure-Tube is a device absorber tuned to the higher operating temperatures and the weight of tube amplifiers.\u003c\/p\u003e\n\u003cp\u003eIt is built on the same seven-layer MLA structure as the regular \u003ca href=\"\/en\/products\/bfly-audio-pure-absorber-set\"\u003ePure\u003c\/a\u003e, but is designed in material and load capacity so that it stays reliable in the long term even under heavy, warm-running tube equipment. You choose load capacity and height (17, 24 or 31 mm) directly here on the page.\u003c\/p\u003e\n\u003ch2\u003eWhy the Pure-Tube?\u003c\/h2\u003e\n\u003cp\u003eTube amplifiers bring two challenges that a normal absorber doesn't solve ideally: they are often heavier than solid-state units, and they get noticeably warmer in operation. The Pure-Tube is dimensioned for exactly this load profile, with the same seven damping layers of cork, Sorbothane and special rubber as the standard Pure.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMore calm in the background, cleaner imaging and fewer microphonic effects – tube amplifiers in particular, because of their sensitive electron tubes, react especially clearly to vibration from outside.\u003c\/p\u003e\n\u003ch3\u003eWho is the Pure-Tube for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eJust right for tube preamps and power amps that noticeably benefit from decoupling. Straight talk: for solid-state units without tubes, the regular Pure is the more suitable choice and usually also the more sensible one price-wise – the Pure-Tube is specifically tuned to tube load profiles, not generally \"the better\" version.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAnyone who owns a tube amplifier and has ever seen how it reacts to a knock on the rack immediately understands why there is a dedicated variant here. Which size, height and mounting suit your device, we're happy to clarify with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Device absorber for tube amplifiers, MLA technology (Multi Layer Adjustment)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e 6 materials across 7 layers – cork with natural rubber, aluminum body, cork with natural rubber, Sorbothane with a parallel air chamber, special rubber, aluminum lid, gel cushion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 44 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e selectable 17, 24 or 31 mm – selectable directly here on the page in the «Height \u0026amp; mounting» option (no effect on the sound, no price difference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity per absorber:\u003c\/strong\u003e Pure-Tube-0 up to 12 kg · Pure-Tube-1 up to 35 kg · Pure-Tube-2 up to 55 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e without thread (freestanding, height 17, 24 or 31 mm freely selectable) or with M4, M5, M6 or M8 thread (CHF 30 surcharge per set, always at the designated 24 mm height) – all selectable directly here on the page\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Aluminum silver or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 4 absorbers in a case, in your chosen color, size, height or thread version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference from the regular Pure?\u003c\/h3\u003e\n\u003cp\u003eBoth work with the same seven-layer MLA structure, but the Pure-Tube is specifically tuned to the weight and heat generation of tube equipment. For solid-state amplifiers without tubes, the regular Pure is usually enough.\u003c\/p\u003e\n\u003ch3\u003eWhich size suits my tube amplifier?\u003c\/h3\u003e\n\u003cp\u003eAgain, the weight per contact point is decisive: Pure-Tube-0 carries up to 12 kg, Pure-Tube-1 up to 35 kg, Pure-Tube-2 up to 55 kg. Weigh your device and divide by the number of feet, then choose directly here on the page.\u003c\/p\u003e\n\u003ch3\u003eWhich height should I choose: 17, 24 or 31 mm?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer recommends placing the absorber directly under the device's base next to the original feet. Choose the height so that the original feet just barely hover – the device then rests exclusively on the absorbers. The height has no effect on the sound and none on the price. It's best to measure the height of your original feet; if in doubt, we're happy to advise you.\u003c\/p\u003e\n\u003ch3\u003eCan the Pure-Tube permanently withstand the heat of tubes?\u003c\/h3\u003e\n\u003cp\u003eYes, that's exactly what it's built for – the choice of materials takes into account the higher operating temperatures that tube equipment generates in continuous use. A normal safety distance between tubes and housing still makes sense.\u003c\/p\u003e\n\u003ch3\u003eCan I also bolt the Pure-Tube in place?\u003c\/h3\u003e\n\u003cp\u003eYes, in the «Height \u0026amp; mounting» option you choose between the free heights 17, 24, 31 mm and the threaded version M4, M5, M6 or M8 (CHF 30 surcharge per set). The threaded version is supplied at the designated 24 mm height.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Pure-Tube from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eTube amplifiers are sensitive devices for which decoupling is especially worthwhile – we advise you whether your model benefits from it and which size fits. Call, write, or reach us on WhatsApp, drawing on our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find further absorbers for solid-state devices with the \u003ca href=\"\/en\/products\/bfly-audio-pure-absorber-set\"\u003ePure\u003c\/a\u003e, and more on the topic under \u003ca href=\"\/en\/collections\/entkopplung\"\u003edecoupling\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003eHiFi furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Schwarz \/ Pure-Tube-0 \/ 17 mm","offer_id":53486975713616,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 17 mm","offer_id":53486975746384,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 17 mm","offer_id":53486975779152,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 17 mm","offer_id":53486975811920,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 17 mm","offer_id":53486975844688,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 17 mm","offer_id":53486975877456,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 24 mm + Gewinde M4","offer_id":53487000191312,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 24 mm + Gewinde M5","offer_id":53487000224080,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 24 mm + Gewinde M6","offer_id":53487000256848,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 24 mm + Gewinde M8","offer_id":53487000289616,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 24 mm + Gewinde M4","offer_id":53487000322384,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 24 mm + Gewinde M5","offer_id":53487000355152,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 24 mm + Gewinde M6","offer_id":53487000387920,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 24 mm + Gewinde M8","offer_id":53487000420688,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 24 mm + Gewinde M4","offer_id":53487000453456,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 24 mm + Gewinde M5","offer_id":53487000486224,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 24 mm + Gewinde M6","offer_id":53487000518992,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 24 mm + Gewinde M8","offer_id":53487000551760,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 24 mm + Gewinde M4","offer_id":53487000584528,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 24 mm + Gewinde M5","offer_id":53487000617296,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 24 mm + Gewinde M6","offer_id":53487000650064,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 24 mm + Gewinde M8","offer_id":53487000682832,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 24 mm + Gewinde M4","offer_id":53487000715600,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 24 mm + Gewinde M5","offer_id":53487000748368,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 24 mm + Gewinde M6","offer_id":53487000781136,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 24 mm + Gewinde M8","offer_id":53487000813904,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 24 mm + Gewinde M4","offer_id":53487000846672,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 24 mm + Gewinde M5","offer_id":53487000879440,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 24 mm + Gewinde M6","offer_id":53487000912208,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 24 mm + Gewinde M8","offer_id":53487000944976,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 24 mm","offer_id":53736330133840,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-0 \/ 31 mm","offer_id":53736330166608,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 24 mm","offer_id":53736330199376,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-1 \/ 31 mm","offer_id":53736330232144,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 24 mm","offer_id":53736330264912,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ Pure-Tube-2 \/ 31 mm","offer_id":53736330297680,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 24 mm","offer_id":53736330330448,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-0 \/ 31 mm","offer_id":53736330363216,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 24 mm","offer_id":53736330395984,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-1 \/ 31 mm","offer_id":53736330428752,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 24 mm","offer_id":53736330461520,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ Pure-Tube-2 \/ 31 mm","offer_id":53736330494288,"sku":null,"price":369.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-pure-tube-geraeteabsorber-fuer-roehrenverstaerker-schraegansicht.jpg?v=1788011759"},{"product_id":"bfly-audio-talis-elite-absorberfuesse","title":"bFly-Audio Talis Elite – Absorber Feet Set of 4","description":"\u003cp\u003eThe bFly-Audio Talis Elite is the top version of the Talis absorber feet and decouples speakers and equipment at the highest technical level in the series.\u003c\/p\u003e\n\u003cp\u003eWhere Talis Basic and Talis Pro are solid starting points, the Elite goes consistently further: a larger contact area, higher load capacity and a build engineered for maximum calm rather than compromise.\u003c\/p\u003e\n\u003ch2\u003eWhy the Talis Elite?\u003c\/h2\u003e\n\u003cp\u003eThe body is larger than in the Basic and Pro (Ø 55 mm for S\/M, Ø 72 mm for L\/XL) and combines multiple damping layers into a broader-band result. That lets the Elite carry between 28 and 400 kg per set, depending on size — enough reserve for almost any floorstanding speaker and any rack.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA noticeably calmer soundstage, more contour in the low end and a resolution that clearly sets itself apart from the Basic and Pro versions. The difference here is no longer a nuance, but generally clearly perceptible.\u003c\/p\u003e\n\u003ch3\u003eWho is the Talis Elite for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to extract the last bit of calm from an already fully dialed-in chain, or who needs to decouple very heavy floorstanding speakers and racks. Bottom line: if you're just starting out with decoupling, the \u003ca href=\"\/en\/products\/bfly-audio-talis-basic\"\u003eTalis Basic\u003c\/a\u003e or \u003ca href=\"\/en\/products\/bfly-audio-talis-pro\"\u003eTalis Pro\u003c\/a\u003e already give you a very good entry point — the Elite is the last step, not the first.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Talis Elite is what happens when bFly-audio stops making compromises on the Talis line. If you have the budget and a correspondingly high-quality chain for it, this is the most uncompromising solution in the series. Which size and thread fit your speakers is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e absorber feet for speakers and equipment, top version of the Talis line, set of 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize S:\u003c\/strong\u003e Ø 55 mm · height 23 mm · up to 28 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize M:\u003c\/strong\u003e Ø 55 mm · height 23 mm · up to 50 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize L:\u003c\/strong\u003e Ø 72 mm · height 25 mm · up to 100 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize XL:\u003c\/strong\u003e Ø 72 mm · height 25 mm · up to 400 kg per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M8 standard included · M6, M10, M12 or M8 fine thread for USM Haller selectable directly here on the page, surcharge CHF 30 per set\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver (aluminium) or Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 4 absorbers incl. screws matching the chosen thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat sets the Talis Elite apart from the Talis Pro?\u003c\/h3\u003e\n\u003cp\u003eThe Elite is larger, carries more weight per set and combines the damping layers more consistently for a broader-band result. The surcharge over the Pro is especially worthwhile on already high-quality chains, where the difference becomes clearly audible.\u003c\/p\u003e\n\u003ch3\u003eWhat size do I need?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the weight of your speaker or device per set: S carries up to 28 kg, M up to 50 kg, L up to 100 kg, XL up to 400 kg. For heavy floorstanding speakers or racks, you're on the safe side with L or XL.\u003c\/p\u003e\n\u003ch3\u003eWhich thread do I need, and does a different one cost extra?\u003c\/h3\u003e\n\u003cp\u003eStandard is M8, included in the price. M6, M10, M12 or the fine thread for USM Haller furniture are selectable directly here on the page, surcharge CHF 30 per set. Without threading, you simply place the absorbers underneath.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Talis Elite at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eFor an investment at this level, we give you thorough advice on whether stepping up from Pro to Elite is really worth it for your chain. Get in touch by phone, email or WhatsApp, we know the Talis line from practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe floorstanding speakers the Elite is worthwhile for can be found under \u003ca href=\"\/en\/collections\/standlautsprecher\"\u003eFloorstanding Speakers\u003c\/a\u003e, more bases under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Schwarz \/ S \/ M8 Standard","offer_id":53486977286480,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ M8 Standard","offer_id":53486977319248,"sku":null,"price":429.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ M8 Standard","offer_id":53486977352016,"sku":null,"price":629.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL \/ M8 Standard","offer_id":53486977384784,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ S \/ M6","offer_id":53486977417552,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ S \/ M10","offer_id":53486977450320,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ S \/ M12","offer_id":53486977483088,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ S \/ M8 Feingewinde (USM Haller)","offer_id":53486977515856,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ M6","offer_id":53486977548624,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ M10","offer_id":53486977581392,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ M12","offer_id":53486977614160,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53486977646928,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ M6","offer_id":53486977679696,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ M10","offer_id":53486977712464,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ M12","offer_id":53486977745232,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486977778000,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL \/ M6","offer_id":53486977810768,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL \/ M10","offer_id":53486977843536,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL \/ M12","offer_id":53486977876304,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ XL \/ M8 Feingewinde (USM Haller)","offer_id":53486977909072,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ S \/ M8 Standard","offer_id":53486977941840,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ M \/ M8 Standard","offer_id":53486977974608,"sku":null,"price":429.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ L \/ M8 Standard","offer_id":53486978007376,"sku":null,"price":629.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ XL \/ M8 Standard","offer_id":53486978040144,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ S \/ M6","offer_id":53486978072912,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ S \/ M10","offer_id":53486978105680,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ S \/ M12","offer_id":53486978138448,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ S \/ M8 Feingewinde (USM Haller)","offer_id":53486978171216,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ M \/ M6","offer_id":53486978203984,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ M \/ M10","offer_id":53486978236752,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ M \/ M12","offer_id":53486978269520,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ M \/ M8 Feingewinde (USM Haller)","offer_id":53486978302288,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ L \/ M6","offer_id":53486978335056,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ L \/ M10","offer_id":53486978367824,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ L \/ M12","offer_id":53486978400592,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ L \/ M8 Feingewinde (USM Haller)","offer_id":53486978433360,"sku":null,"price":659.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ XL \/ M6","offer_id":53486978466128,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ XL \/ M10","offer_id":53486978498896,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ XL \/ M12","offer_id":53486978531664,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ XL \/ M8 Feingewinde (USM Haller)","offer_id":53486978564432,"sku":null,"price":829.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-talis-elite-absorberfuesse-4er-set-schraegansicht.png?v=1788011752"},{"product_id":"bfly-audio-satellite-q-gehaeuseabsorber","title":"bFly-Audio Satellite-Q – Housing Absorber","description":"\u003cp\u003eThe bFly-Audio Satellite-Q is a housing absorber that tackles case vibrations on HiFi equipment and speakers directly at the source.\u003c\/p\u003e\n\u003cp\u003eInstead of going underneath the device, the Satellite-Q is placed on top of the case – an additional point of attack that most absorber concepts don't cover at all.\u003c\/p\u003e\n\u003ch2\u003eWhy the Satellite-Q?\u003c\/h2\u003e\n\u003cp\u003eMany HiFi devices today, source components especially, weigh surprisingly little, making them more prone to microphony – case vibrations that travel back into the sensitive electronics. The Satellite-Q solves that in two ways at once: it adds weight, stabilising the case, while the weight-dependent absorber inside additionally dampens vibration. Even a light knock on the case shows the difference.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMore calm and stability in the sound, less blur especially on light, vibration-prone source components. The PLUS version, thanks to its extra gel pad, brings even better damping properties.\u003c\/p\u003e\n\u003ch3\u003eWho is the Satellite-Q for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal for light to medium-weight devices such as streamers, DACs or preamps that noticeably resonate on their case. Bottom line: on already very heavy, solid cases, the effect is smaller – there, a base under the device is worth trying first, for example from the \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Satellite-Q is an uncomplicated add-on tool for a problem many people don't even have on their radar: case vibrations from above instead of below. Which size and version fits your device is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e housing absorber against case vibrations, placed on top instead of underneath\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize M:\u003c\/strong\u003e 150 × 93 × 20 mm (L×W×H) · weight 0.7 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize L:\u003c\/strong\u003e 200 × 124 × 20 mm (L×W×H) · weight 1.3 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Basic or PLUS (with additional gel pad for better damping)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Aluminium or Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1 Satellite-Q in your chosen size and version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow exactly does the Satellite-Q work?\u003c\/h3\u003e\n\u003cp\u003eIt's simply placed on top of your device's case. The extra weight stabilises the case against microphony, while the integrated absorber additionally dampens vibrations inside – with no modification or installation at all.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between Basic and PLUS?\u003c\/h3\u003e\n\u003cp\u003eThe PLUS version additionally has a red gel pad built into the central absorber, bringing even better damping properties. For a noticeable entry point, the Basic version is entirely sufficient.\u003c\/p\u003e\n\u003ch3\u003eWhat size fits my device?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the case size: M (150×93 mm) for compact devices, L (200×124 mm) for larger cases. More important than the exact area is that the Satellite-Q sits stably and centrally.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio Satellite-Q at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eCase vibrations are often overlooked – we show you where they're actually an issue in your system and where they're not. Get in touch by phone, email or WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore absorbers and bases can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching source components under \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/cd-player\"\u003eCD Players\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Aluminium \/ M \/ Basic","offer_id":53486979580240,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"Aluminium \/ M \/ PLUS","offer_id":53486979613008,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Aluminium \/ L \/ Basic","offer_id":53486979645776,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Aluminium \/ L \/ PLUS","offer_id":53486979678544,"sku":null,"price":379.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ Basic","offer_id":53486979711312,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ M \/ PLUS","offer_id":53486979744080,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ Basic","offer_id":53486979776848,"sku":null,"price":329.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ L \/ PLUS","offer_id":53486979809616,"sku":null,"price":379.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-satellite-q-gehaeuseabsorber-unteransicht.png?v=1788012054"},{"product_id":"bfly-audio-cube-kabelabsorber","title":"bFly-Audio CUBE – Cable Absorber Made from Amasaque Wood","description":"\u003cp\u003eThe bFly-Audio CUBE is a cable absorber made from the African wood Amasaque that decouples speaker and power cables from vibration.\u003c\/p\u003e\n\u003cp\u003eCables are often considered the most underestimated link in the chain – yet they too pick up vibration via the microphony effect. The CUBE addresses exactly that, with a material rarely seen in cable decoupling.\u003c\/p\u003e\n\u003ch2\u003eWhy the CUBE?\u003c\/h2\u003e\n\u003cp\u003eAmasaque has a high air content and an even grain, which makes it an outstanding material for optimal decoupling. Set into the underside are two-layer absorbers of Sorbothane and a particularly airy rubber variant, plus a cork-rubber insert in the triangular groove where the cable rests.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calmer, more clearly drawn soundstage with less microphony-related blur, especially audible with high-quality speaker and mains cables that run exposed across the floor.\u003c\/p\u003e\n\u003ch3\u003eWho is the CUBE for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who's already invested in good cables and wants to extract the last bit of calm from their cabling. Bottom line: on very short, taut cable runs with no floor contact, the effect is smaller – the CUBE pays off most on longer, exposed cable runs.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe CUBE shows that decoupling doesn't have to stop at the equipment. Unspectacular in use, but a simple last building block for anyone who's already built out their cable runs consistently. How many pieces make sense for your cabling is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e cable absorber for decoupling speaker and power cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Amasaque wood, absorber inserts of Sorbothane, airy rubber and cork-rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 50 × 55 × 45 mm (H×W×D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. cable diameter:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSets:\u003c\/strong\u003e set of 2, set of 6 or set of 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e CUBE absorbers in your chosen set size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many CUBE absorbers do I need?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the number and length of your cable runs – as a rule of thumb, one CUBE per 30 to 50 cm of exposed cable is usually enough. For a stereo setup with speaker and mains cables, the set of 6 or set of 8 is usually the more practical choice.\u003c\/p\u003e\n\u003ch3\u003eWhich cables is the CUBE suitable for?\u003c\/h3\u003e\n\u003cp\u003eFor speaker and power cables up to 30 mm in diameter that rest on the floor. For very thick mains cables, you should measure the diameter beforehand.\u003c\/p\u003e\n\u003ch3\u003eWhy Amasaque wood instead of plastic?\u003c\/h3\u003e\n\u003cp\u003eThanks to its high air content and even grain, Amasaque naturally brings good damping properties, which bFly-audio further reinforces with the additional absorber inserts. That's why the CUBE is deliberately not made from plastic like some cheaper alternatives.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio CUBE at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe show you where cable decoupling is actually worthwhile for your system and where it's less so – honest assessment instead of sales pressure. Get in touch by phone, email or WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore absorbers can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching cables under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"2er-Set","offer_id":53486980399440,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"6er-Set","offer_id":53486980432208,"sku":null,"price":569.0,"currency_code":"CHF","in_stock":true},{"title":"8er-Set","offer_id":53486980464976,"sku":null,"price":749.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-cube-kabel-absorber-amasaque-holz-schraegansicht.png?v=1788011669"},{"product_id":"bfly-audio-tower-flex-kabelabsorber","title":"bFly-Audio TOWER-Flex – Cable Absorber","description":"\u003cp\u003eThe bFly-Audio TOWER-Flex is a cable absorber made from special plastic that decouples round and flat speaker and mains cables from floor vibrations.\u003c\/p\u003e\n\u003cp\u003eIt's the further-developed, one-third heavier version of the classic TOWER – more weight for more stability, paired with a more homogeneous electromagnetic environment thanks to the greater distance from the floor.\u003c\/p\u003e\n\u003ch2\u003eWhy the TOWER-Flex?\u003c\/h2\u003e\n\u003cp\u003eThe vibration-damping body of special plastic sits on a ring of proven cork-natural rubber granulate on the underside. Unlike the simpler TOWER, the TOWER-Flex is designed for round and flat cables equally, and carries 30 to 50 cm of resting cable length depending on cable stiffness.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA calmer, more clearly defined soundstage for speaker and mains cables that are noticeably less influenced by floor contact – especially on hard floors without carpet.\u003c\/p\u003e\n\u003ch3\u003eWho is the TOWER-Flex for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone with high-quality, exposed speaker or mains cables that noticeably benefit from decoupling. Bottom line: on short, taut cable runs with no significant floor contact, even the TOWER-Flex does little – here the investment only pays off on longer, exposed runs.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe TOWER-Flex is the more consistent evolution of the classic TOWER – more weight, more stability, equally suited to round and flat cables. How many pieces make sense for your cabling is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e cable absorber for round and flat cables, made from special plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Ø 55 mm · height 65 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e Black or White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length per absorber:\u003c\/strong\u003e 30 to 50 cm of resting cable, depending on cable stiffness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSets:\u003c\/strong\u003e set of 6 or set of 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e TOWER-Flex absorbers in your chosen set size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference to the classic TOWER?\u003c\/h3\u003e\n\u003cp\u003eThe TOWER-Flex is a third heavier, which provides more stability and a more homogeneous electromagnetic environment. It's also designed for round and flat cables equally, while the classic TOWER only covers round cables.\u003c\/p\u003e\n\u003ch3\u003eHow many TOWER-Flex do I need?\u003c\/h3\u003e\n\u003cp\u003eAs a rule of thumb, one absorber per 30 to 50 cm of exposed cable is enough, depending on how stiff the cable is. For a stereo setup with multiple cable runs, the set of 6 or set of 8 is usually the more practical choice.\u003c\/p\u003e\n\u003ch3\u003eDoes the TOWER-Flex also fit flat cables?\u003c\/h3\u003e\n\u003cp\u003eYes, that's exactly the difference to the classic TOWER – the ring of cork-natural rubber on the underside accommodates both round and flat cable cross-sections.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio TOWER-Flex at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe show you where cable decoupling is actually worthwhile for your system. Get in touch by phone, email or WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore absorbers can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, matching cables under \u003ca href=\"\/en\/collections\/kabel\"\u003eCables\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"TOWER-Flex \/ 6er-Set","offer_id":53486980563280,"sku":null,"price":359.0,"currency_code":"CHF","in_stock":true},{"title":"TOWER-Flex \/ 8er-Set","offer_id":53486980596048,"sku":null,"price":459.0,"currency_code":"CHF","in_stock":true},{"title":"TOWER \/ 8er-Set","offer_id":53486980628816,"sku":null,"price":239.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-tower-flex-kabel-absorber-schraegansicht.png?v=1788011854"},{"product_id":"bfly-audio-polarx-kupfer-absorber","title":"bFly-Audio PolarX Copper – Height-Adjustable Absorber","description":"\u003cp\u003eThe bFly-Audio PolarX Copper is a height-adjustable absorber with an interchangeable copper conductor that decouples equipment or speakers from footfall and case resonances.\u003c\/p\u003e\n\u003cp\u003eUnlike a rigid spike, the PolarX can be adjusted in height and fine-tuned tonally via the conductor – a tool for anyone who doesn't just want to decouple their system, but to tune it deliberately.\u003c\/p\u003e\n\u003ch2\u003eWhy the PolarX Copper?\u003c\/h2\u003e\n\u003cp\u003eEvery PolarX has an interchangeable top, the conductor. A POM plastic conductor is included as standard; the PolarX Copper additionally includes a copper conductor. The top also has a spike seat, so the PolarX can also be used under equipment or speakers with spikes.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe copper conductor delivers a more earthy, natural sound than the supplied POM variant – firmer bass, more three-dimensional instrument bodies and a calmer, more spacious soundstage. If you swap the conductor for POM on several or all PolarX units, the sound becomes gradually softer and more analogue – so the effect can be finely dialed in.\u003c\/p\u003e\n\u003ch3\u003eWho is the PolarX Copper for (and who isn't it for)?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants to decouple deliberately under amplifiers, source components or speakers, and additionally fine-tune the sound in a chosen direction. Bottom line: a single PolarX does little – the effect only shows up when three or four are used together under one device, usually placed in a triangular arrangement.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PolarX Copper is more than an absorber – it's a tuning tool. If you're willing to experiment with position and conductor, you get a genuine sound control for your chain. Which size fits your device is something we're happy to work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e height-adjustable absorber with interchangeable conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor:\u003c\/strong\u003e copper (POM conductor additionally included as standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e height 26–31 mm (adjustable), Ø 44 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e PolarX-0 up to 1 kg, PolarX-1 up to 4 kg, PolarX-2 up to 10 kg, PolarX-3 up to 17 kg (per piece)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial feature:\u003c\/strong\u003e spike seat on top for equipment or speakers with spikes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 1× PolarX in your chosen size incl. copper conductor and POM conductor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many PolarX do I need per device?\u003c\/h3\u003e\n\u003cp\u003eUsually three or four are used per device, often in a triangular arrangement with two under the heavier side (e.g. the transformer) and one centrally. Choose the size to match your device's weight.\u003c\/p\u003e\n\u003ch3\u003eWhat size fits my device?\u003c\/h3\u003e\n\u003cp\u003eThat depends on your device's weight per contact point: PolarX-0 up to 1 kg, PolarX-1 up to 4 kg, PolarX-2 up to 10 kg, PolarX-3 up to 17 kg. At our store in Wädenswil, we're happy to weigh it through with you if you're unsure.\u003c\/p\u003e\n\u003ch3\u003eWhat does switching between the copper and POM conductor achieve?\u003c\/h3\u003e\n\u003cp\u003eCopper sounds more earthy and firm, POM slightly softer and more analogue. Since both conductors are included, you can compare both variants at home in your own time and choose the combination that suits your system.\u003c\/p\u003e\n\u003ch3\u003eCan I also use the PolarX under speakers with spikes?\u003c\/h3\u003e\n\u003cp\u003eYes, the top of the conductor has a spike seat, so the PolarX can also be used under speakers that already have spikes fitted.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio PolarX Copper at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eWe advise you on size, quantity and placement for your specific device – no off-the-shelf standard solution. Get in touch by phone, email or WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore absorbers can be found under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"PolarX-0","offer_id":53486991343952,"sku":null,"price":199.0,"currency_code":"CHF","in_stock":true},{"title":"PolarX-1","offer_id":53486991376720,"sku":null,"price":209.0,"currency_code":"CHF","in_stock":true},{"title":"PolarX-2","offer_id":53486991409488,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"PolarX-3","offer_id":53486991442256,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-polarx-kupfer-absorber-hoehenverstellbar-schraegansicht.png?v=1788012543"},{"product_id":"bfly-audio-4tube-absorber-set","title":"bFly-Audio 4TUBE-2 – Absorbers for Tube Amplifiers","description":"\u003cp\u003eThe bFly-Audio 4TUBE-2 is a set of equipment absorbers tuned to the uneven weight distribution of tube amplifiers, consisting of two softer and two harder absorbers.\u003c\/p\u003e\n\u003cp\u003eA tube amplifier rarely sits evenly on its feet: the mains and output transformers make one side noticeably heavier. This is exactly what bFly-Audio developed the 4TUBE for – with MLA technology (Multi Layer Adjustment) and two differently tuned pairs of absorbers in one set. The MKII version adds an aluminium plug for more horizontal stability. You choose the height right here on the page.\u003c\/p\u003e\n\u003ch2\u003eWhy the bFly-Audio 4TUBE-2?\u003c\/h2\u003e\n\u003cp\u003eThe structure from top to bottom, as specified by the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCork with natural rubber\u003c\/li\u003e\n\u003cli\u003esolid aluminium body as a separating layer\u003c\/li\u003e\n\u003cli\u003eCork with natural rubber\u003c\/li\u003e\n\u003cli\u003eSorbothane\u003c\/li\u003e\n\u003cli\u003eNatural rubber as floor contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwo absorbers with highly effective, softer damping belong under the lighter side of the unit, two with a harder tuning under the heavy side. The result, according to the manufacturer: the music sounds more relaxed, more spacious and therefore more natural.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMore calm in the background, a cleaner image – tubes in particular react sensitively to vibrations from outside. The absorber doesn't give you a new tonal colour, but ensures that the tube electronics can work undisturbed. Hand on heart – anyone who thinks decoupling is a matter of taste with tubes has rarely experienced how sensitively they react to shocks.\u003c\/p\u003e\n\u003ch3\u003eWho is the 4TUBE-2 suitable for – and who not?\u003c\/h3\u003e\n\u003cp\u003eJust right for tube preamps and power amps as well as tube integrated amplifiers up to about 50 kg with uneven weight distribution. Plain speaking: for solid-state units without tubes, the \u003ca href=\"\/en\/products\/bfly-audio-master-absorber-set\"\u003eMASTER\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/bfly-audio-pure-absorber-set\"\u003ePure\u003c\/a\u003e is the more suitable choice. If you're looking for a particularly heavy tube amplifier or maximum effort, take a look at the \u003ca href=\"\/en\/products\/bfly-audio-pure-tube-absorber-set\"\u003ePure-Tube\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe 4TUBE-2 is the logical answer to a problem that most tube owners know without naming it: uneven load. Two pairs of absorbers, four height and thread options, one case – done. Which height suits your unit's feet, we're happy to work out with you at HD Zürisee in Wädenswil before you order.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e equipment absorber for tube amplifiers, MLA technology (Multi Layer Adjustment), MKII\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e 5 layers – cork with natural rubber, aluminium body, cork with natural rubber, Sorbothane, natural rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet composition:\u003c\/strong\u003e 2 absorbers with softer damping (lighter side of the unit) + 2 absorbers with harder tuning (heavy side of the unit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 44 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e selectable 14, 21 or 28 mm – selectable right here on the page in the option «Height \u0026amp; Mounting» (no effect on sound, no price difference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity (manufacturer's figure):\u003c\/strong\u003e up to 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e without thread (free-standing) or with thread M4, M6 or M8 (CHF 30 surcharge per set, only in 21 mm height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e aluminium silver or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 4 absorbers in a case (2 soft, 2 hard), in the chosen colour, height or thread version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does the 4TUBE-2 have two different pairs of absorbers?\u003c\/h3\u003e\n\u003cp\u003eTube amplifiers are rarely evenly heavy: the transformers usually sit on one side. The set therefore contains two absorbers with softer damping for the lighter side of the unit and two with harder tuning for the heavy side. That way the unit stands in balance.\u003c\/p\u003e\n\u003ch3\u003eWhat weight is the 4TUBE-2 suitable for?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer, the 4TUBE-2 is designed for units up to 50 kg. Weigh your unit and note how the weight is distributed. If you're unsure, we'll look together with you at whether the 4TUBE-2 or another bFly model fits better.\u003c\/p\u003e\n\u003ch3\u003eWhich height should I choose: 14, 21 or 28 mm?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer, the height has no effect on the sound. What matters is how much space is available under your unit and how high it should sit afterwards. Measure the height of your unit's feet; if in doubt, we're happy to advise you.\u003c\/p\u003e\n\u003ch3\u003eCan I screw the 4TUBE-2 in place?\u003c\/h3\u003e\n\u003cp\u003eYes, in the option «Height \u0026amp; Mounting» you choose the version with thread M4, M6 or M8 (CHF 30 surcharge per set). The threaded version is only available in 21 mm height.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio 4TUBE-2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eTube amplifiers are sensitive devices for which decoupling is especially worthwhile. We advise you on whether your model benefits and which height suits your feet. Call us, write to us or get in touch via WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor the tube amplifier, you'll find further solutions under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, and the stable base for it is provided by \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003ehi-fi furniture\u003c\/a\u003e. The matching amplifiers are among the \u003ca href=\"\/en\/collections\/vollverstarker\"\u003eintegrated amplifiers\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Silber \/ 14 mm","offer_id":53736344060240,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ 21 mm","offer_id":53736344093008,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ 28 mm","offer_id":53736344125776,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ 21 mm + Gewinde M4","offer_id":53736344158544,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ 21 mm + Gewinde M6","offer_id":53736344191312,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ 21 mm + Gewinde M8","offer_id":53736344224080,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 14 mm","offer_id":53736344256848,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 21 mm","offer_id":53736344289616,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 28 mm","offer_id":53736344322384,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 21 mm + Gewinde M4","offer_id":53736344355152,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 21 mm + Gewinde M6","offer_id":53736344387920,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ 21 mm + Gewinde M8","offer_id":53736344420688,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-4tube-2-absorber-set-schraegansicht.jpg?v=1791139094"},{"product_id":"bfly-audio-master-absorber-set","title":"bFly-Audio MASTER – Equipment Absorbers, Set of 4","description":"\u003cp\u003eThe bFly-Audio MASTER is an equipment absorber that decouples hi-fi components from vibrations via five matched material layers.\u003c\/p\u003e\n\u003cp\u003eIf you want to start with decoupling without immediately investing in the reference class, you end up with the MASTER at bFly-Audio. The principle behind it is called MLA – Multi Layer Adjustment: several different materials in a single component. The MKII version additionally brings an HS plug made of extremely rigid aluminium, which increases horizontal stability. You choose size and height right here on the page.\u003c\/p\u003e\n\u003ch2\u003eWhy the bFly-Audio MASTER?\u003c\/h2\u003e\n\u003cp\u003eThe structure from top to bottom, as specified by the manufacturer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCork with natural rubber\u003c\/li\u003e\n\u003cli\u003esolid aluminium body as a separating layer\u003c\/li\u003e\n\u003cli\u003eCork with natural rubber\u003c\/li\u003e\n\u003cli\u003eSorbothane with plug\u003c\/li\u003e\n\u003cli\u003eNatural rubber as floor contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA single damping material can only ever do what it was made for. Combining cork, Sorbothane and natural rubber in one structure covers more than any single solution – and in one component that is supplied as a set of four in a case.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eFour absorbers in a case, available in aluminium silver or black. You place them under the existing equipment feet or directly under the base plate – or screw them in place if needed (MASTER-2). Typical uses are amplifiers, DACs, streamers, CD players and turntables. What you get from them is not a new tonal colour, but more calm in the background. Described unspectacularly – and that's exactly as it should be.\u003c\/p\u003e\n\u003ch3\u003eWho is the MASTER suitable for – and who not?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone who wants to give an already coherent system that last bit of calm. Plain speaking: if you're just starting out, invest first in speakers, placement and room. An absorber refines a good system; it doesn't repair a weak one. If you have a tube amplifier, take a look at the \u003ca href=\"\/en\/products\/bfly-audio-4tube-absorber-set\"\u003e4TUBE-2\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/bfly-audio-pure-tube-absorber-set\"\u003ePure-Tube\u003c\/a\u003e; if you want the greater effort, look at the \u003ca href=\"\/en\/products\/bfly-audio-pure-absorber-set\"\u003ePure\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe MASTER is the sensible middle of the bFly range: cleanly layered, with height and thread selectable to suit and no show. Hand on heart – in a mature system, decoupling is one of the cheaper measures that still changes something. Which size, height and mounting suit your unit, we're happy to work out with you at HD Zürisee in Wädenswil before you order.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e equipment absorber for mechanical decoupling, MLA technology (Multi Layer Adjustment), MKII with HS plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure:\u003c\/strong\u003e 5 layers – cork with natural rubber, aluminium body, cork with natural rubber, Sorbothane with plug, natural rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e MASTER-2 44 mm · MASTER-3 55 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e MASTER-2 selectable 14, 21 or 28 mm · MASTER-3 selectable 15 or 30 mm – selectable right here on the page in the option «Height \u0026amp; Mounting» (no effect on sound, no price difference)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity (manufacturer's figure):\u003c\/strong\u003e MASTER-2 up to 55 kg · MASTER-3 up to 75 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e without thread (free-standing) or, for the MASTER-2, with thread M4, M5, M6 or M8 (CHF 30 surcharge per set, only in 21 mm height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter material:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours:\u003c\/strong\u003e aluminium silver or black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e bFly-Audio, Germany\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 4 absorbers in a case, in the chosen colour, size, height or thread version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between MASTER and Pure?\u003c\/h3\u003e\n\u003cp\u003eBoth work with bFly-Audio's MLA technology. The MASTER damps in five layers and is the more affordable solution. The Pure is the more elaborate absorber in the range. Which one suits your unit, we're happy to clarify with you.\u003c\/p\u003e\n\u003ch3\u003eWhich size suits my unit?\u003c\/h3\u003e\n\u003cp\u003eWhat matters is the weight per absorber. According to the manufacturer, the MASTER-2 carries up to 55 kg and the MASTER-3 up to 75 kg. Divide the unit's weight by the number of support points and choose the suitable size right here on the page.\u003c\/p\u003e\n\u003ch3\u003eWhich height should I choose?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer, the height has no effect on the sound. What matters is how much space is available under your unit. The MASTER-2 comes in 14, 21 or 28 mm, the MASTER-3 in 15 or 30 mm. If in doubt, we'll measure together with you.\u003c\/p\u003e\n\u003ch3\u003eCan I screw the MASTER in place?\u003c\/h3\u003e\n\u003cp\u003eYes, for the MASTER-2 you choose the version with thread M4, M5, M6 or M8 in the option «Height \u0026amp; Mounting» (CHF 30 surcharge per set). The threaded version is only available in 21 mm height. The MASTER-3 is available without thread.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the bFly-Audio MASTER at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause size, height and mounting have to suit your unit – and that's exactly what we sort out with you, instead of leaving you alone in the jungle of variants. Call us, write to us or get in touch via WhatsApp, from our practice in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMechanical sources and amplifiers benefit the most – take a look at the \u003ca href=\"\/en\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e. You'll find further solutions against vibrations under \u003ca href=\"\/en\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e, and the stable base for it is provided by \u003ca href=\"\/en\/collections\/hifi-mobel\"\u003ehi-fi furniture\u003c\/a\u003e.\u003c\/p\u003e","brand":"bFly-Audio","offers":[{"title":"Silber \/ MASTER-2 \/ 14 mm","offer_id":53736344650064,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 21 mm","offer_id":53736344682832,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 28 mm","offer_id":53736344715600,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 21 mm + Gewinde M4","offer_id":53736344748368,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 21 mm + Gewinde M5","offer_id":53736344781136,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 21 mm + Gewinde M6","offer_id":53736344813904,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-2 \/ 21 mm + Gewinde M8","offer_id":53736344846672,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-3 \/ 15 mm","offer_id":53736344879440,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Silber \/ MASTER-3 \/ 30 mm","offer_id":53736344912208,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 14 mm","offer_id":53736344944976,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 21 mm","offer_id":53736344977744,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 28 mm","offer_id":53736345010512,"sku":null,"price":229.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 21 mm + Gewinde M4","offer_id":53736345043280,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 21 mm + Gewinde M5","offer_id":53736345076048,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 21 mm + Gewinde M6","offer_id":53736345108816,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-2 \/ 21 mm + Gewinde M8","offer_id":53736345141584,"sku":null,"price":259.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-3 \/ 15 mm","offer_id":53736345174352,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz \/ MASTER-3 \/ 30 mm","offer_id":53736345207120,"sku":null,"price":279.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bfly-audio-master-2-absorber-set-schraegansicht.jpg?v=1791139097"}],"url":"https:\/\/hdzuerisee.ch\/en\/collections\/entkopplung.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}