{"product_id":"emt-jsd-pure-black","title":"EMT JSD Pure Black MC Cartridge, Copper Coil","description":"\u003cp\u003eThe EMT JSD Pure Black is an MC cartridge with a sapphire cantilever and a generator coil of pure copper in a black anodized aluminum body.\u003c\/p\u003e\n\u003cp\u003eIt's the entry point into the EMT reference class and, at 10 grams, the lightest of the three systems — the one that makes the fewest demands on your tonearm. Honestly: most systems get more out of this one than out of a heavier system that doesn't suit the arm.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the JSD Pure Black?\u003c\/h2\u003e\n\u003cp\u003eThe cantilever here is made entirely of sapphire, not a titanium\/sapphire combination as in the Novel series — stiff, light, and without deformation of its own. It carries the same MR HP diamond: a multi-radius cut with multiple rounded facets, polished to the highest degree, that reaches deeper into the groove than any elliptical stylus. The pure copper (4N) coil delivers the warm, harmonically rich base tone this system is known for; if you prefer something more open, the same mechanics are available with a pure silver coil as the \"AG\" version. The black anodized aluminum body is finished with a high-density coating that damps resonances between cartridge and tonearm.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eColor, flow, and a very quiet background. The Pure Black doesn't overstate the top or the bottom, it plays it on texture instead: the pluck of a string, the breath before a note, the decay in the recording space. At 1.05 mV it delivers above-average output for an MC system, which makes noise a non-issue — and at 2.4 grams tracking force it sits stable in the groove, even on old pressings that have seen better days.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAward: \"Cartridge of the Year\" — Hi-Fi+ Awards 2021, issue 202 (awarded in combination with the EMT STX-5\/10 step-up transformer).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWho is the JSD Pure Black for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners who want to step up from a solid mid-range system into the reference class, without swapping the tonearm at the same time. Straight talk: if you want analytical sharpness and maximum neutrality, go for the Novel Titan; if you want power and big tone colors, go for the Novel Gold. And a sapphire cantilever is brittle — if someone in your household regularly handles the tonearm unsupervised, plan for a stylus replacement from the start.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most balanced of the three EMT systems and the one with the broadest tonearm compatibility. It doesn't do anything wrong, it does a lot very right, and it doesn't force you into any further purchases. If you call HD Zürisee in Wädenswil, we'll first look together at what's in your tonearm — with cartridges, that's half the battle.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: MC stereo cartridge\u003c\/li\u003e\n\u003cli\u003eDiamond: MR HP (Multi Radius, highly polished)\u003c\/li\u003e\n\u003cli\u003eCantilever: Sapphire\u003c\/li\u003e\n\u003cli\u003eCoil: Pure copper (4N); option: pure silver (\"AG\" version)\u003c\/li\u003e\n\u003cli\u003eMagnet: AlNiCo, gold-plated\u003c\/li\u003e\n\u003cli\u003eBody: Aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eConnection: 1\/2\" — 4-pin\u003c\/li\u003e\n\u003cli\u003eWeight: 10 g\u003c\/li\u003e\n\u003cli\u003eRecommended tracking force: 2.4 g\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 1.05 mV at 5 cm\/s\u003c\/li\u003e\n\u003cli\u003eCompliance: 12 µm\/mN\u003c\/li\u003e\n\u003cli\u003eVertical tracking angle (VTA): 23°\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 – 30,000 Hz\u003c\/li\u003e\n\u003cli\u003eInternal impedance: 2 × 24 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended load impedance: 200 – 300 Ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the JSD Pure Black and the AG version?\u003c\/h3\u003e\n\u003cp\u003eJust the coil. The standard version uses pure copper (4N) and sounds a touch warmer and rounder, the variant marked AG uses a pure silver coil and sounds more open in the treble. Mechanically, in the diamond and cantilever, both are identical. Tell us which direction you're after.\u003c\/p\u003e\n\u003ch3\u003eWhat tracking force and load impedance does the JSD Pure Black need?\u003c\/h3\u003e\n\u003cp\u003eEMT recommends 2.4 grams tracking force and 200 to 300 Ohm load impedance. The tracking force is a bit higher than on the Novel series, and the impedance matches the internal impedance of 2 × 24 Ohm. Set both properly, or you'll give away exactly the calm you're paying for.\u003c\/p\u003e\n\u003ch3\u003eWhat does a sapphire cantilever offer over aluminum?\u003c\/h3\u003e\n\u003cp\u003eSapphire is significantly stiffer than aluminum and doesn't deform on its own. The cantilever therefore passes groove deflection to the generator with less distortion, especially with fine detail and in the inner grooves. The price is brittleness: a sapphire cantilever won't forgive accidents with the cleaning brush.\u003c\/p\u003e\n\u003ch3\u003eWhat turntable suits the JSD Pure Black?\u003c\/h3\u003e\n\u003cp\u003eAny turntable with a smoothly running bearing and a tonearm of medium effective mass. At 10 grams, the Pure Black is the lightest of the three EMT systems and therefore the easiest to match. Bring us your tonearm's data, and we'll work out the resonance frequency together.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the EMT JSD Pure Black at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause analog needs advice, not an order number. We check your tonearm, phono stage and setup together with you, mount the cartridge properly, and are still here years later when the stylus needs replacing. The shop in Wädenswil has been around since 1997. Just give us a call.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Pure Black plays on any properly set up \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e and needs a \u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ephono preamp\u003c\/a\u003e that allows 200 to 300 Ohm. You'll find cleaning tools, scales and alignment gauges under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAlles Vinyl\u003c\/a\u003e. To compare, you'll find all cartridges under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003eTonabnehmer\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMT","offers":[{"title":"Default Title","offer_id":53036963430736,"sku":null,"price":4500.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/emt-jsd-pure-black-mc-tonabnehmer-schraegansicht.jpg?v=1785884238","url":"https:\/\/hdzuerisee.ch\/en-ch\/products\/emt-jsd-pure-black","provider":"HD Zürisee AG","version":"1.0","type":"link"}