{"product_id":"emt-hsd-sc6","title":"EMT HSD SC6 MC Cartridge for Subchassis","description":"\u003cp\u003eThe EMT HSD SC6 is an MC cartridge that EMT has specifically tuned for turntables with a sprung subchassis.\u003c\/p\u003e\n\u003cp\u003eThis isn't a label slapped on a standard cartridge, but a real adaptation: lighter housing, softer stylus suspension. Both ensure that the tonearm-cartridge resonance and the deck's suspension don't get in each other's way. Like the larger EMT systems, the SC6 is hand-built in Switzerland.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the HSD SC6?\u003c\/h2\u003e\n\u003cp\u003eA sprung deck is a system that's designed to oscillate. Put a heavy cartridge with a stiff suspension on it and two resonances move dangerously close together — the result is wandering bass, unsettled tracking and an arm that reacts to every footstep across the room. The SC6 tackles this from the other side: just 10 grams, plus a stylus compliance of 15 µm\/mN.\u003c\/p\u003e\n\u003cp\u003eThat puts it in a clean window on the light-to-medium arms typical of sprung decks — such as THORENS' subchassis models. It shares generator, diamond and connector with the HSD 006, so the EMT heritage remains clearly recognizable.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA Super Fineline diamond on an aluminum cantilever, a coil of 4N copper and a nickel-plated AlNiCo magnet in an aluminum housing. Sonically that means: an open, well-sorted top end without hiss, voices with flesh on their bones, and bass that finally keeps contour instead of floating on a sprung deck.\u003c\/p\u003e\n\u003cp\u003eAt 1 mV output voltage, the SC6 is almost gentle for a moving coil. On an MC input with 200 to 300 ohms termination it runs without contortions, and its 2.0-gram tracking force is easier still on a sprung suspension.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the HSD SC6 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone whose deck stands on springs and whose tonearm isn't among the really heavy ones. Bluntly: on a solid, rigid deck with a heavy arm, the SC6 is the wrong partner — that's where the slightly heavier, stiffer HSD 006 belongs. And without an MC-capable phono input or step-up transformer, this cartridge stays under its potential too. If you're unsure what effective mass your arm has: ask us, it's sorted out in two minutes.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe SC6 solves a problem many vinyl listeners never even recognized as a problem — they simply wondered why their sprung deck didn't sound better with an expensive MC. EMT hasn't built the bigger system here, but the more fitting one, and that's exactly what makes it strong. We at HD Zürisee will mount and align it properly on your deck on request.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"With the HSD SC6, the cartridge is among my absolute hottest cartridge tips.\"\u003c\/em\u003e — LowBeats, review August 2025\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: MC stereo\u003c\/li\u003e\n\u003cli\u003eDiamond: SFL (Super Fineline)\u003c\/li\u003e\n\u003cli\u003eCantilever: Aluminum\u003c\/li\u003e\n\u003cli\u003eCoil: Copper 4N\u003c\/li\u003e\n\u003cli\u003eMagnet: AlNiCo, nickel-plated\u003c\/li\u003e\n\u003cli\u003eHousing: Aluminum\u003c\/li\u003e\n\u003cli\u003eMount: 1\/2\" — 4-pin\u003c\/li\u003e\n\u003cli\u003eVertical tracking angle: 23°\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 1.0 mV at 5 cm\/s\u003c\/li\u003e\n\u003cli\u003eInternal impedance: 2 × 24 ohms\u003c\/li\u003e\n\u003cli\u003eRecommended load impedance: 200 – 300 ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 – 25,000 Hz\u003c\/li\u003e\n\u003cli\u003eStylus compliance: 15 µm\/mN\u003c\/li\u003e\n\u003cli\u003eRecommended tracking force: 2.0 g\u003c\/li\u003e\n\u003cli\u003eWeight: 10 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich turntables is the EMT HSD SC6 designed for?\u003c\/h3\u003e\n\u003cp\u003eFor decks with a sprung subchassis, i.e. the classic design with a floating platter and tonearm carrier. At 10 grams and 15 µm\/mN compliance, the SC6 puts little strain on the suspension and keeps its resonance well clear of the suspension's working range. On rigid mass-loaded decks, the HSD 006 is the better fit.\u003c\/p\u003e\n\u003ch3\u003eWhat phono input does the HSD SC6 need?\u003c\/h3\u003e\n\u003cp\u003eAn MC input with 200 to 300 ohms termination impedance, or a suitable step-up transformer. The output voltage is 1 mV at 5 cm\/s, the internal resistance 2 × 24 ohms. That makes the SC6 uncomplicated for a moving coil and places no extreme demands on your phono stage's gain.\u003c\/p\u003e\n\u003ch3\u003eWhy is higher stylus compliance important on a subchassis deck?\u003c\/h3\u003e\n\u003cp\u003eBecause tonearm and cartridge together form a spring-mass system. If its resonance sits too close to the natural frequency of the subchassis suspension, the two build on each other. The SC6's softer suspension shifts the resonance to where it belongs: between outside disturbances and the lowest musical signals.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the HSD SC6 myself?\u003c\/h3\u003e\n\u003cp\u003eIn principle, yes, but it only comes out clean with a template and a scale. What matters are overhang, offset angle, azimuth and the 2.0-gram tracking force; with sprung decks, leveling the subchassis is an extra step. If you'd rather not do that yourself, we'll take care of mounting and alignment for you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the EMT HSD SC6 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just sell turntables — we've been adjusting and repairing them for decades. We check beforehand whether your arm and phono stage suit the SC6, and our technician Mauri mounts it properly for you. Get in touch by phone, email or WhatsApp — even if you're still just weighing it up.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor the SC6 to show what it can do, the rest of the vinyl chain has to be right. You'll find sprung decks and their rigid counterparts under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, and the matching MC input under \u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ephono preamps\u003c\/a\u003e. A spirit level, template, brush and record weight are waiting in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e. Alternatives are under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, and everything else around the black disc at \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eEverything Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMT","offers":[{"title":"Default Title","offer_id":53036897173840,"sku":null,"price":1770.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/emt-hsd-sc6-mc-tonabnehmer-schraegansicht.jpg?v=1785884238","url":"https:\/\/hdzuerisee.ch\/en-ch\/products\/emt-hsd-sc6","provider":"HD Zürisee AG","version":"1.0","type":"link"}