{"product_id":"crtechklebeadapterm6","title":"CR-Tech Sound Supports Adhesive Adapter M6, Set of 4","description":"\u003cp\u003eThe CR-Tech Adhesive Adapter M6 is a self-adhesive metal disc with an M6 threaded stud that turns a device with no threaded hole into a mounting point for CR-Tech Sound Supports.\u003c\/p\u003e\u003cp\u003eMany hi-fi components simply have no threads prepared for decoupling feet. The adhesive adapter creates that point: stick the disc onto the case bottom, screw the Sound Support onto the stud – done. That way decoupling also works where the manufacturer only planned for four soft rubber feet. Supplied as a set of 4, matching a complete set of feet.\u003c\/p\u003e\u003ch2\u003eWhy the Adhesive Adapter M6?\u003c\/h2\u003e\u003cp\u003eDecoupling works most cleanly when device and foot are joined firmly and precisely. Loose, unattached absorbers do work too, but a screwed-in foot channels vibration more purposefully into the damping system. That's exactly the connection this adapter creates – without you having to drill a single hole into the case. Your device stays exactly as it left the factory.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eFour flat metal discs, each with a central M6 threaded stud and a self-adhesive underside. The stud engages the M6 threaded hole of the Sound Supports 5023 and 5035 – the two models this adapter is made for. Stick it on, let it set briefly, screw the foot on: you don't need more tools than your hands for that.\u003c\/p\u003e\u003ch3\u003eWho is the Adhesive Adapter M6 suited for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003eIdeal for anyone who wants to mount their Sound Supports firmly but whose device has no threaded hole – flat streamers, DACs or network players, for example.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e if your device already has an M6 thread, you don't need the adapter. Nor do you if you just want to place the feet underneath without attaching them. And for the Sound Support 6540 it's the wrong adapter: that one has an M8 thread. The adhesive adapter is the elegant solution for the case in between – no more, but no less either.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eA small part with a clear purpose: firm Sound Supports mounting even where a thread was never planned – without drilling, without leaving permanent marks on the case. Not essential, but the cleanest solution for the in-between case. Whether you actually need it, we'll tell you honestly beforehand.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: self-adhesive adapter disc for CR-Tech Sound Supports\u003c\/li\u003e\n\u003cli\u003eThread: M6 external thread (threaded stud)\u003c\/li\u003e\n\u003cli\u003eConnection: engages the M6 threaded hole of the Sound Supports\u003c\/li\u003e\n\u003cli\u003eFits: Sound Supports 5023 and 5035 (M6 thread)\u003c\/li\u003e\n\u003cli\u003eDoes not fit: Sound Supports 6540 (M8 thread); the 5017 is designed for speakers with spikes\u003c\/li\u003e\n\u003cli\u003eAttachment: self-adhesive on one side (industrial specialty adhesive)\u003c\/li\u003e\n\u003cli\u003eMaterial: metal\u003c\/li\u003e\n\u003cli\u003eShape: flat disc with a central threaded stud\u003c\/li\u003e\n\u003cli\u003eIncluded: set of 4 – enough for one 4-piece set of Sound Supports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the Adhesive Adapter M6 have an internal or external thread?\u003c\/h3\u003e\u003cp\u003eAn external thread. An M6 threaded stud protrudes from the disc, onto which you screw the Sound Support – the feet themselves have an M6 threaded hole. So you don't need an extra screw or any tools, just a clean, grease-free bonding surface on the case bottom.\u003c\/p\u003e\u003ch3\u003eHow many adhesive adapters do I need?\u003c\/h3\u003e\u003cp\u003eOne per foot. This set of 4 therefore covers one complete 4-piece set of Sound Supports 5023 or 5035. It doesn't fit the 6540: that model has an M8 thread. If you're unsure, we'll quickly work out what you need.\u003c\/p\u003e\u003ch3\u003eHow do I attach the adapter correctly?\u003c\/h3\u003e\u003cp\u003eFirst clean the bonding surface on the case thoroughly with isopropanol or cleaning alcohol so no film of grease remains. Only then peel off the protective film and press the adapter on firmly. Let the bond set briefly before screwing in the foot – that keeps it holding permanently.\u003c\/p\u003e\u003ch3\u003eCan I remove the adapter again?\u003c\/h3\u003e\u003cp\u003eGenerally yes. With a little careful heat, from a hairdryer for example, and a gentle twisting motion, it usually comes off without leaving residue. Wipe off any adhesive traces afterwards with a soft cloth. For sensitive lacquered surfaces, better ask us beforehand.\u003c\/p\u003e\u003ch3\u003eWhy buy the CR-Tech Adhesive Adapter M6 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause an accessory only helps when it matches the mounting – and that's exactly what we clarify with you beforehand. The team at HD Zürisee in Wädenswil tells you how many adapters your setup needs and what matters when bonding them. Call us at 044 680 22 00 or write via WhatsApp to \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe Adhesive Adapter belongs under the \u003ca href=\"\/en-ch\/products\/crtech5023\"\u003eCR-Tech Sound Supports 5023\u003c\/a\u003e and \u003ca href=\"\/en-ch\/products\/crtech5035\"\u003e5035\u003c\/a\u003e – the two M6 models it's made for. An overview of everything that absorbs vibration at our shop is in the \u003ca href=\"\/en-ch\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e category. If your device has a thread but in the wrong size, the \u003ca href=\"\/en-ch\/products\/crtechgewindeadapter\"\u003ethread adapter\u003c\/a\u003e gets you there.\u003c\/p\u003e","brand":"CR-TECH","offers":[{"title":"Default Title","offer_id":52989502390608,"sku":null,"price":68.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/crtech-sound-supports-klebeadapter-m6-schraegansicht.png?v=1785846685","url":"https:\/\/hdzuerisee.ch\/en-ch\/products\/crtechklebeadapterm6","provider":"HD Zürisee AG","version":"1.0","type":"link"}