{"title":"Wall Speakers","description":"\u003cp\u003eWall speakers are slim speakers that mount directly on the wall – as a visible on-wall box in the living room or as surround speakers in a home cinema.\u003c\/p\u003e\n\u003cp\u003eThey're the answer to a very honest question: where do you put a speaker when there's no room for a floorstander? At HD Zürisee in Wädenswil you'll find wall speakers from Canton, DALI, Focal, Argon Audio and Sonox – from the discreet surround satellite to the full-fledged on-wall box with genuine stereo ambitions.\u003c\/p\u003e\n\n\u003ch2\u003eWhy wall speakers?\u003c\/h2\u003e\n\u003cp\u003eBecause they deliver sound exactly where the floor is already taken. They sit flat against the wall, need no floor space, and can be placed close to the TV, seating position or screen. That makes them ideal for living rooms with little floor space, for a tidy home cinema setup, or anywhere the gear should elegantly fade into the background.\u003c\/p\u003e\n\n\u003ch2\u003eOn-wall, surround or centre?\u003c\/h2\u003e\n\u003cp\u003eOn-wall speakers like the Canton GLE or Townus series carry the main sound – stereo or front channels in a home cinema. Surround models like the Canton AR 4 S2 or the Focal Aria SR900 provide the ambient sound all around. And a wall-mounted centre speaker like the DALI Opticon LCR MK2 keeps dialogue in films clear and intelligible. What role your speaker needs to play decides which model fits.\u003c\/p\u003e\n\n\u003ch2\u003eWhat to look for when buying\u003c\/h2\u003e\n\u003cp\u003ePay attention to the wall condition (can it bear the weight?), the right mount and the alignment to the listening position. A speaker mounted close to the wall sounds different from a freestanding box – usually a bit more direct, sometimes with more bass. That's not a drawback, you just need to know it. Honestly: most bad purchases don't come from the speaker itself, but from the wrong expectation. That's exactly where our advice comes in.\u003c\/p\u003e\n\u003cp\u003eStill unsure whether wall or ceiling? Take a look at our \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003eIn-Wall\/In-Ceiling Speakers\u003c\/a\u003e, for surround sound the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e – or the full overview under \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions about wall speakers\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between wall speakers and in-wall\/in-ceiling speakers?\u003c\/strong\u003e\u003cbr\u003eWall speakers mount flat on the wall and remain visible, in-wall\/in-ceiling speakers disappear flush into the wall or ceiling. Wall speakers can be placed more flexibly and are easier to retrofit, while in-wall\/in-ceiling speakers are completely unobtrusive. Both can easily be combined in the same system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre wall speakers suitable for surround and home cinema?\u003c\/strong\u003e\u003cbr\u003eYes, many wall speakers are made exactly for that – for example the Canton AR 4 S2 or the Focal Aria SR900 as surround speakers. They project ambient sound in a targeted way and can be mounted space-savingly next to or behind the seating position, where a floorstander would just be in the way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are wall speakers mounted?\u003c\/strong\u003e\u003cbr\u003eVia a wall bracket or integrated mounting points on the back of the cabinet. What matters is a load-bearing wall and the right mounting hardware for the speaker's weight. With plasterboard or heavier models, professional mounting is worth it – we're happy to help with selection and installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy wall speakers from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we tell you which speaker really suits your wall and your room. HD Zürisee in Wädenswil carries brands like Canton, DALI, Focal and Argon, gives you honest advice on placement and alignment, and on request takes care of installation on site.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What's the difference between wall speakers and in-wall\/in-ceiling speakers?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Wall speakers mount flat on the wall and remain visible, in-wall\/in-ceiling speakers disappear flush into the wall or ceiling. Wall speakers can be placed more flexibly and are easier to retrofit, while in-wall\/in-ceiling speakers are completely unobtrusive. Both can easily be combined in the same system.\"}},{\"@type\":\"Question\",\"name\":\"Are wall speakers suitable for surround and home cinema?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, many wall speakers are made exactly for that – for example the Canton AR 4 S2 or the Focal Aria SR900 as surround speakers. They project ambient sound in a targeted way and can be mounted space-savingly next to or behind the seating position, where a floorstander would just be in the way.\"}},{\"@type\":\"Question\",\"name\":\"How are wall speakers mounted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Via a wall bracket or integrated mounting points on the back of the cabinet. What matters is a load-bearing wall and the right mounting hardware for the speaker's weight. With plasterboard or heavier models, professional mounting is worth it – we're happy to help with selection and installation.\"}},{\"@type\":\"Question\",\"name\":\"Why buy wall speakers from HD Zürisee?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because we tell you which speaker really suits your wall and your room. HD Zürisee in Wädenswil carries brands like Canton, DALI, Focal and Argon, gives you honest advice on placement and alignment, and on request takes care of installation on site.\"}}]}\n\u003c\/script\u003e","products":[{"product_id":"argonaudioforus4wallschwarz","title":"Argon Audio Forus 4 Wall Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 4 Wall is a passive 2-way wall speaker with just 10.3 cm cabinet depth and an integrated keyhole mount for vertical and horizontal installation.\u003c\/p\u003e\n\u003cp\u003eIn Black, it's the born home cinema speaker. Next to a dark TV or on a media wall, it disappears into the background instead of crowding the front as yet another box.\u003c\/p\u003e\n\u003ch2\u003eWhy the Forus 4 Wall?\u003c\/h2\u003e\n\u003cp\u003eBecause a bookshelf speaker on the wall always stays a compromise, and an in-wall speaker means a construction project. The Forus 4 Wall solves the in-between: a 4-inch paper cone and a 0.75-inch soft dome with neodymium magnet, crossover at 3000 Hz, all in an MDF cabinet that projects just over ten centimetres into the room. Hang it, connect it, done – no wall cutout, no dust.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eGold-plated single-wire terminals, a magnetic front grille and a mount that's already built into the cabinet. That means the Forus 4 Wall runs on any amplifier or AV receiver with a standard speaker connection. As a front, effect, or rear pair, it can be expanded with the Forus Center and a subwoofer into a slim home cinema set that stays right where it belongs – on the wall.\u003c\/p\u003e\n\u003ch3\u003eWho is the Forus 4 Wall suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: if you expect maximum depth from a single cabinet, this isn't for you – flat wall speakers have their physical limits, that's what subwoofers are for. It isn't active either, so an amplifier belongs in front of it. But if you want a tidy TV wall without stands and cable clutter, don't want to cut into the wall of a rental flat, or are retrofitting a home cinema, this is the most pragmatic solution in the Forus family.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Forus 4 Wall is the answer to how sound gets onto the wall without the room suffering for it. Which mounting height, which amplifier, which set of center speaker and subwoofer: we're happy to plan that out with you. HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 4″ paper cone\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 60–20,000 Hz (± 3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 84 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e gold-plated binding posts, single-wire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated keyhole wall mount, vertical and horizontal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetic front grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 21 × 29 × 10.3 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 kg per unit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Forus 4 Wall active or passive?\u003c\/h3\u003e\n\u003cp\u003ePassive. The Forus 4 Wall needs an amplifier or AV receiver to drive it – it has no amplifier or streaming module of its own. In return, it runs on any standard speaker terminal and can be freely combined with existing home cinema electronics.\u003c\/p\u003e\n\u003ch3\u003eHow is the Forus 4 Wall mounted?\u003c\/h3\u003e\n\u003cp\u003eVia an integrated keyhole mount on the back, which allows vertical and horizontal installation. You don't need an additional bracket; essentially a suitable screw per speaker is enough. With drywall, be sure to use suitable wall anchors – three kilograms hangs permanently on the wall.\u003c\/p\u003e\n\u003ch3\u003eDoes the Forus 4 Wall work as a surround speaker?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what it's made for. At just over ten centimetres deep, it barely protrudes at the side or behind the sofa and matches sonically with the other Forus models, such as the Forus Center. That keeps effect panning in the home cinema consistent instead of mismatched.\u003c\/p\u003e\n\u003ch3\u003eDo I need a subwoofer with the Forus 4 Wall?\u003c\/h3\u003e\n\u003cp\u003eNot essential for music, but highly recommended for home cinema. A 4-inch driver in a flat cabinet can't outsmart physics: below about 60 Hz it gets thin. A compact subwoofer fills in exactly that range and takes additional load off the wall speakers.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 4 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause wall mounting raises questions that are rarely answered online: what height, what angle, which amplifier, which set? That's exactly where our experienced team helps, with delivery and on-site installation on request, backed by our own technician.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor a coherent set: a matching \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e to drive it, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, the right \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecables\u003c\/a\u003e for clean wall routing, or a browse through the \u003ca href=\"\/en-ch\/collections\/argon-audio\"\u003eArgon Audio world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481353552,"sku":null,"price":348.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-4-wall-wandlautsprecher-schwarz-stereopaar.jpg?v=1785428336"},{"product_id":"argonaudioforus4wallwalnuss","title":"Argon Audio Forus 4 Wall Wall Speaker, Walnut (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 4 Wall is a passive 2-way wall speaker with a 4-inch paper cone, 10.3 cm cabinet depth and an integrated wall mount for vertical and horizontal installation.\u003c\/p\u003e\n\u003cp\u003eIn Walnut, it's no wallflower – it's a deliberately placed detail. Warm wood-effect finish against a light wall, magnetic front grille flush against it – closer to an object than a device.\u003c\/p\u003e\n\u003ch2\u003eWhy the Forus 4 Wall in Walnut?\u003c\/h2\u003e\n\u003cp\u003eBecause wall speakers are rarely beautiful. Most are white, boxy, and designed to be ignored. The Walnut version turns that around: this speaker is allowed to be seen, especially above a turntable or next to a wall light. You gain wall space without giving up anything acoustically. Technically, everything stays proven – 0.75-inch soft dome with neodymium magnet, 4-inch paper cone, crossover at 3000 Hz, 60 to 20,000 Hz.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA speaker that saves floor space without looking like a compromise. Gold-plated screw terminals accept standard speaker cable, the keyhole mount sits in the cabinet, and three kilograms per unit is quickly mounted on a wall with suitable anchors. Whether as a stereo pair in the living room or as an extension to a home cinema with the Forus Center: the sound character stays consistent across the whole range.\u003c\/p\u003e\n\u003ch3\u003eWho is the Forus 4 Wall Walnut suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: if you want the speaker to be completely invisible, go for the white version or an in-wall model straight away. If you expect deep bass without a subwoofer, 10.3 centimetres of cabinet depth will disappoint you – that's physics, not stinginess. But if you're after a wall speaker that fits wood furniture and doesn't look like installation tech in a living room, there's hardly anything more fitting in the Forus family.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Forus 4 Wall in Walnut is for anyone who wants to save floor space without making the room feel sterile. How high, how far apart, with which amplifier, and whether with a subwoofer: tell us about your wall. HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 4″ paper cone\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 60–20,000 Hz (± 3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 84 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e gold-plated binding posts, single-wire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated keyhole wall mount, vertical and horizontal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetic front grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut wood-effect\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 21 × 29 × 10.3 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 kg per unit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow slim is the Forus 4 Wall really?\u003c\/h3\u003e\n\u003cp\u003e10.3 centimetres of cabinet depth. That means it barely protrudes from the wall more than a framed picture and also fits in hallways, corridors, or above a sideboard, where a classic bookshelf speaker with a stand would simply be in the way. At 21 × 29 centimetres of front area, it still stays visible.\u003c\/p\u003e\n\u003ch3\u003eCan I also mount the Forus 4 Wall horizontally?\u003c\/h3\u003e\n\u003cp\u003eYes. The integrated keyhole mount is designed for vertical and horizontal installation, and the Argon logo can be aligned accordingly. Mounted horizontally, it works well above or below a TV; mounted vertically, as a classic stereo pair left and right of the sofa. Make sure both speakers are aligned exactly the same way.\u003c\/p\u003e\n\u003ch3\u003eIs the Walnut finish real wood?\u003c\/h3\u003e\n\u003cp\u003eNo, it's an MDF cabinet with a walnut wood-effect finish. That's actually practical on a wall: the surface doesn't react to room humidity and stays dimensionally stable. Visually, the warm tone fits well with walnut and oak furniture and takes the technical edge off wall mounting.\u003c\/p\u003e\n\u003ch3\u003eDoes the Forus 4 Wall also work as a pure stereo pair?\u003c\/h3\u003e\n\u003cp\u003eYes. On an integrated amplifier or streaming amplifier, it delivers a solid stereo pair, for example above a turntable or sideboard. Mount it at ear height if possible and with equal distance to the side walls, so the centre image between the speakers stays stable.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 4 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause there are a few decisions between the product photo and a finished wall: positioning, cable routing, amplifier, expansion. Our experienced team in Wädenswil sorts that out instead of leaving you alone with a box – with delivery, installation and service from our own technician on request.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eTo complete the wall: an \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e to drive it, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, matching \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecables\u003c\/a\u003e for the run, or everything about \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003evinyl\u003c\/a\u003e under the speaker pair.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481386320,"sku":null,"price":348.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-4-wall-wandlautsprecher-walnuss-stereopaar.jpg?v=1785428336"},{"product_id":"argonaudioforus4wallweiss","title":"Argon Audio Forus 4 Wall Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 4 Wall is a passive 2-way wall speaker with 10.3 cm cabinet depth, mounted directly on the wall via an integrated keyhole mount.\u003c\/p\u003e\n\u003cp\u003eWhite is the most discreet of the three finishes. Against a light wall, what mostly remains is a calm surface – no stand, no cable clutter, no box taking over the room.\u003c\/p\u003e\n\u003ch2\u003eWhy the Forus 4 Wall in White?\u003c\/h2\u003e\n\u003cp\u003eBecause many living spaces simply have no floor space left. The Forus 4 Wall moves the speaker to where there's room anyway: the wall. A 4-inch paper cone, a 0.75-inch soft dome with neodymium magnet, crossover at 3000 Hz, and an MDF cabinet that projects just over ten centimetres into the room. In White, the front blends into the wall rather than standing in front of it.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo wall speakers with gold-plated screw terminals, magnetic front grilles and a mount that works both vertically and horizontally. Powered by an amplifier of your choice. The combination with a compact subwoofer works especially well: it takes on the foundation that a flat cabinet can't deliver, turning a discreet wall pair into a fully-fledged music system for a living room or reading corner.\u003c\/p\u003e\n\u003ch3\u003eWho is the Forus 4 Wall White suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: if you expect bass without a subwoofer, you should look for a bigger cabinet – flat and deep simply don't go together in speakers. And it isn't active, so an amplifier is needed. But if you don't want to cut into the wall of a rented flat, have little floor space, or are simply done with cables on the floor, this is a surprisingly unfussy solution. And yes, it makes for a tidy living room too.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Forus 4 Wall in White is the most understated way to bring music into a room that's already full. Which height, which distance, which amplifier, and whether a subwoofer belongs – let us advise you. HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 4″ paper cone\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 60–20,000 Hz (± 3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 84 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e gold-plated binding posts, single-wire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated keyhole wall mount, vertical and horizontal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetic front grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 21 × 29 × 10.3 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 kg per unit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Forus 4 Wall need its own amplifier?\u003c\/h3\u003e\n\u003cp\u003eYes. It's passive and is powered by an integrated amplifier, streaming amplifier or AV receiver that works stably at 4 ohms. A particularly large power amp isn't needed; what matters more is clean, controlled power in the range of about 30 to 60 watts per channel.\u003c\/p\u003e\n\u003ch3\u003eDoes the white version really disappear on the wall?\u003c\/h3\u003e\n\u003cp\u003eOn a white or light wall, it comes pretty close. At 10.3 centimetres deep with the magnetic front grille fitted, what remains is a flat, calm rectangle. It doesn't become fully invisible – that would take an in-wall speaker with a cut-out.\u003c\/p\u003e\n\u003ch3\u003eHow do I hide the speaker cables?\u003c\/h3\u003e\n\u003cp\u003eMost elegantly in a flat cable channel that gets painted over, or inside the wall if you're renovating anyway. As a quick solution, self-adhesive flat cables under the paint work well. Plan the cable length generously – extending it later always looks worse than measuring correctly once.\u003c\/p\u003e\n\u003ch3\u003eDoes the Forus 4 Wall pair well with a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eVery well, in fact. The Forus 4 Wall plays down to around 60 Hz; below that, a compact subwoofer takes over, for example from the Argon Malmö family. On an AV receiver you'd typically cross over at 80 Hz, which makes the pair on the wall sound noticeably more relaxed.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 4 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with nearly three decades of industry experience, we know what makes wall solutions fail in everyday use: wrong height, forgotten cable runs, mismatched electronics. We think this through with you beforehand, deliver and install on-site on request, and stay reachable with our own technician.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eGood matches: an \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e to drive it, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, the right \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecables\u003c\/a\u003e for wall routing, or a look at all \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481419088,"sku":null,"price":348.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-4-wall-wandlautsprecher-weiss-stereopaar.jpg?v=1785428335"},{"product_id":"argonaudioforus5wallschwarz","title":"Argon Audio Forus 5 Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 5 Wall is a passive 2-way wall speaker with a 5-inch mid-woofer, a 0.75-inch soft dome and a bass reflex enclosure, mounted directly on the wall via an integrated keyhole hanger. At 13 centimetres deep, it needs no floor space – just a good screw. In Black, it practically vanishes against dark walls and next to the TV.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Forus 5 Wall?\u003c\/h2\u003e\n\u003cp\u003eA flat speaker has a fundamental problem: cabinet volume makes bass, and depth is exactly what it doesn't have. Argon solves this through area instead of depth – 29.7 × 42 centimetres of front baffle at only 13 centimetres of cabinet depth. The result: a 50 Hz lower cutoff frequency, deeper than the freestanding Forus 5 at 55 Hz. The 5-inch cone and the 0.75-inch tweeter cross over at 2,700 Hz.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo speakers with magnetically attached front grilles and gold-plated terminals. The hanger is built into the cabinet, so there's no bulky bracket in the way: one screw per speaker, hang it, done – vertically or horizontally, depending on whether they go next to or below the TV. Any amplifier or AV receiver you like can drive it.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Forus 5 Wall suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: don't underestimate the size. At 42 centimetres tall and nearly 30 centimetres wide, this isn't a discreet little picture frame, it's a visible object on the wall – measure first. It's also passive, so an amplifier belongs in front of it. And if you already have room on the sideboard, the freestanding Forus 5 is the more affordable route. But if you need sound without floor space – a living room with wall mounting, surround channels in a home cinema – you'll find a surprisingly grown-up solution here.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Forus 5 Wall gets more out of 13 centimetres of depth than you'd expect from a wall speaker – because it simply makes up the missing depth in area. Compared with the smaller Forus 4 Wall, it's 5 instead of 4 inches of cone and 50 instead of 60 Hz lower cutoff; that's the whole difference, and it's an audible one. Stereo or surround, which amplifier, what mounting height: we're happy to plan that with you. HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall), bass reflex (rear port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 5″ paper\/fibre cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50–20,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 85 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2,700 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e single-wire, gold-plated terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e integrated keyhole hanger, vertical or horizontal, one screw per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetically attached front grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 29.7 × 42 × 13 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.65 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair (2 speakers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is the Forus 5 Wall mounted on the wall?\u003c\/h3\u003e\n\u003cp\u003eVia an integrated keyhole hanger on the back. A single screw in the wall is enough, and the speaker hangs on it. It can be mounted vertically or horizontally. With drywall or brick, please choose the right anchor – each speaker hangs 5.65 kg on the wall.\u003c\/p\u003e\n\u003ch3\u003eIs the Forus 5 Wall active or passive?\u003c\/h3\u003e\n\u003cp\u003ePassive. It needs an amplifier or AV receiver with normal speaker terminals; it has no amplifier or streaming module of its own. In return, it combines freely with the electronics you already have and later integrates easily into a larger home cinema.\u003c\/p\u003e\n\u003ch3\u003eDoes the Forus 5 Wall have the same drivers as the Forus 5?\u003c\/h3\u003e\n\u003cp\u003eNo. The Forus 5 Wall uses a 5-inch mid-woofer and a 0.75-inch soft dome, while the Forus 5 bookshelf speaker uses 5.25 inches and a 1-inch tweeter. The Wall even reaches a bit deeper at 50 Hz. Same family, its own tuning.\u003c\/p\u003e\n\u003ch3\u003eCan I use the Forus 5 Wall in a home cinema?\u003c\/h3\u003e\n\u003cp\u003eYes. It works as a front or surround speaker in 5.1 and 7.1 setups and matches the other Forus models like the Forus Center. At 4 ohms and 85 dB, the AV receiver should have some headroom in reserve, especially when several channels are driven at once.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 5 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause wall mounting raises questions that are rarely answered online: wall construction, height, cable routing, matching within the set. That's exactly where our experienced team steps in – with honest assessment, our own in-house technician and help that doesn't stop after the purchase.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor a cohesive set: an \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e or AV receiver to drive it, a \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speaker\u003c\/a\u003e for home cinema, suitable \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecable\u003c\/a\u003e for the wall run – or a browse through the whole \u003ca href=\"\/en-ch\/collections\/argon-audio\"\u003eArgon Audio world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481845072,"sku":null,"price":498.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-5-wall-wandlautsprecher-schwarz-stereopaar.jpg?v=1785428461"},{"product_id":"argonaudioforus5wallwalnuss","title":"Argon Audio Forus 5 Wall Speaker, Walnut (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 5 Wall is a passive 2-way wall speaker with a 5-inch mid-woofer, a 0.75-inch soft dome and a bass reflex enclosure, mounted directly on the wall via an integrated keyhole hanger. In Walnut, the technical piece becomes a piece of furniture: warm wood look, 13 centimetres of cabinet depth, no floor space needed.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Forus 5 Wall?\u003c\/h2\u003e\n\u003cp\u003eWall speakers usually fail on volume – flat means little cabinet, little cabinet means little bass. That's why the Forus 5 Wall goes for area instead: 29.7 centimetres wide, 42 centimetres tall, yet only 13 centimetres deep. The result is a 50 Hz lower cutoff frequency – five hertz deeper than the freestanding Forus 5. The 5-inch cone hands over to the 0.75-inch soft dome with neodymium magnet at 2,700 Hz.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of speakers in Walnut, magnetically attached front grilles, gold-plated terminals. The hanger sits inside the cabinet itself: a keyhole slot on the back, one screw per speaker, hang it vertically or horizontally. No bracket, no arm, nothing sticking out. The stereo amplifier or AV receiver you already have is drive enough.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Forus 5 Wall suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eHonestly: this is a large speaker that happens to be flat. 42 centimetres of height needs to be found room for on the wall first – if you want a discreet solution next to the TV, measure beforehand or reach for the smaller Forus 4 Wall. It also needs an amplifier in front of it. But if you want stereo or surround on the wall without giving up on low end, this is exactly that – in a finish that doesn't shout “technology”.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eWalnut and wall mounting is a smart combination: the speaker stands out, but pleasantly. Sonically, the gap to the smaller Forus 4 Wall is proven, not just claimed – 5 instead of 4 inches of cone, 50 instead of 60 Hz, a 2,700 instead of 3,000 Hz crossover. Stereo pair or surround channels, what mounting height and which amplifier: write or call us, we'll go through it with you. HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall), bass reflex (rear port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 5″ paper\/fibre cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50–20,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 85 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2,700 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e single-wire, gold-plated terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e integrated keyhole hanger, vertical or horizontal, one screw per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetically attached front grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 29.7 × 42 × 13 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.65 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Walnut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair (2 speakers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big is the Forus 5 Wall really?\u003c\/h3\u003e\n\u003cp\u003e29.7 cm wide, 42 cm tall and only 13 cm deep. So it doesn't stick out into the room, but it's clearly visible on the wall. If you're working with tight margins, tape a sheet of paper of that size to the wall beforehand – it saves arguments after mounting.\u003c\/p\u003e\n\u003ch3\u003eDo I need an amplifier for the Forus 5 Wall?\u003c\/h3\u003e\n\u003cp\u003eYes, it's passive. Any stereo amplifier or AV receiver with normal speaker terminals works. With 4 ohms and 85 dB sensitivity, a bit of power in reserve is welcome, but you don't need a powerhouse. We're happy to help you work out which unit fits.\u003c\/p\u003e\n\u003ch3\u003eHow does the Forus 5 Wall differ from the Forus 4 Wall?\u003c\/h3\u003e\n\u003cp\u003eThe Forus 5 Wall has a 5-inch mid-woofer instead of 4 inches, reaches deeper at 50 Hz versus 60 Hz, and crosses over at 2,700 instead of 3,000 Hz. At 29.7 × 42 cm, it's also noticeably larger than the Forus 4 Wall's 21 × 29 cm.\u003c\/p\u003e\n\u003ch3\u003eDoes the Walnut finish match my other Forus speakers?\u003c\/h3\u003e\n\u003cp\u003eYes, Argon Audio offers the Forus 5, Forus 5 Wall and the Forus Center in the same Walnut finish. So a mixed set of bookshelf, wall and centre speakers stays visually consistent. With wood-look finishes, batches can vary minimally – if that matters, order them together.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 5 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause wall mounting is half the job, and nobody wants to do it twice. We go through height, orientation, cable routing and amplifier with you before the first screw goes in – with years of experience, our own technician and no sales pressure.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eTo round out the wall set: an \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e or AV receiver, a \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speaker\u003c\/a\u003e from the same family, \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecable\u003c\/a\u003e for a clean run – or the matching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e from the \u003ca href=\"\/en-ch\/collections\/argon-audio\"\u003eArgon Audio world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481877840,"sku":null,"price":498.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-5-wall-wandlautsprecher-walnuss-stereopaar.jpg?v=1785428517"},{"product_id":"argonaudioforus5wallweiss","title":"Argon Audio Forus 5 Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Argon Audio Forus 5 Wall is a passive 2-way wall speaker with a 5-inch mid-woofer, a 0.75-inch soft dome and a bass reflex enclosure, mounted directly on the wall via an integrated keyhole hanger. White is the finish for light-coloured walls: it lets the speaker blend into the wall instead of staging it as a dark rectangle.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Forus 5 Wall?\u003c\/h2\u003e\n\u003cp\u003eThe calculation behind every wall speaker is: depth out, area in. The Forus 5 Wall builds only 13 centimetres deep, but measures 29.7 × 42 centimetres across the front – and so reaches a 50 Hz lower cutoff frequency. That's deeper than the freestanding Forus 5. The 5-inch paper\/fibre cone works up to 2,700 Hz, above which a 0.75-inch soft dome with neodymium magnet takes over.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo white speakers with magnetically attached front grilles and gold-plated terminals. Mounting is kept deliberately simple: a keyhole slot in the cabinet, one screw per side, hang it – vertically for stereo next to the TV, horizontally if it's going below the screen. Any stereo amplifier or AV receiver with standard speaker terminals provides the drive.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Forus 5 Wall suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: White disguises the size better than Black, but it doesn't disappear. 42 centimetres of height per side is a statement – if you're only after rear speakers for a home cinema, the smaller Forus 4 Wall is often the better call. It isn't active either, so an amplifier belongs in front of it. But if you want full-fledged stereo sound and don't have a single square centimetre of floor space free, this is the most consistent solution in the Forus family.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOn a white wall, the Forus 5 Wall gets about as close to invisible as a speaker this size can get – yet sounds like considerably more than it shows. The jump over the Forus 4 Wall is in both spec sheets: 5 instead of 4 inches of cone, 50 instead of 60 Hz, a 2,700 instead of 3,000 Hz crossover. Honestly – when did you last actually enjoy your system instead of just operating it? Talk to us: HD Zürisee in Wädenswil, 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive 2-way wall speaker (on-wall), bass reflex (rear port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 0.75″ soft dome with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 5″ paper\/fibre cone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50–20,000 Hz (−3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 85 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2,700 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e single-wire, gold-plated terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e integrated keyhole hanger, vertical or horizontal, one screw per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e MDF, magnetically attached front grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 29.7 × 42 × 13 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.65 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair (2 speakers)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speakers, magnetic front grilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eAt what height should I mount the Forus 5 Wall?\u003c\/h3\u003e\n\u003cp\u003eAs a stereo pair, ideally so the tweeter sits close to ear height when seated. As a surround channel, it can hang higher, then angled slightly toward the listening position. The keyhole hanger allows vertical and horizontal mounting, so you have flexibility.\u003c\/p\u003e\n\u003ch3\u003eHow deep is the Forus 5 Wall?\u003c\/h3\u003e\n\u003cp\u003e13 centimetres. That means it barely sticks out further from the wall than a large picture frame and needs no floor space. Width and height, at 29.7 and 42 centimetres, are substantial, though – that's the price for bass down to 50 Hz.\u003c\/p\u003e\n\u003ch3\u003eIs the Forus 5 Wall an active speaker?\u003c\/h3\u003e\n\u003cp\u003eNo, it's passive and has neither an amplifier nor streaming on board. It's connected to an amplifier or AV receiver like any classic speaker – gold-plated single-wire terminals, 4 ohms, 85 dB sensitivity. That makes it freely combinable.\u003c\/p\u003e\n\u003ch3\u003eDoes the Forus 5 Wall sound the same as the Forus 5?\u003c\/h3\u003e\n\u003cp\u003eSimilar, but not identical. The Wall uses a 5-inch cone and a 0.75-inch tweeter, the Forus 5 bookshelf speaker uses 5.25 inches and 1 inch. The Wall reaches deeper at 50 Hz, the Forus 5 is a bit louder at 86 dB. Both cross over at 2,700 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Forus 5 Wall from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a wall speaker is a decision made with wall anchors – one you want to get right the first time. We go through position, height, cable routing and the right amplifier with you, and our own technician is still there once the speakers have long since been hung.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eWhat else belongs with it: an \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifier\u003c\/a\u003e or AV receiver to drive it, a \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speaker\u003c\/a\u003e for dialogue in home cinema, proper \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecable\u003c\/a\u003e for the wall run – or the other \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e and the whole \u003ca href=\"\/en-ch\/collections\/argon-audio\"\u003eArgon Audio world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Argon Audio","offers":[{"title":"Default Title","offer_id":52989481910608,"sku":null,"price":498.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/argon-audio-forus-5-wall-wandlautsprecher-weiss-stereopaar.jpg?v=1785428517"},{"product_id":"cantoncd220-3bl","title":"Canton CD 220.3 Compact Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton CD 220.3 is an ultra-flat 2-way compact speaker made of aluminum, which you can hang on the wall thanks to the included wall mount or place classically on a shelf.\u003c\/p\u003e\n\u003cp\u003eThe abbreviation CD stands for \u003cem\u003eCustom Design\u003c\/em\u003e – that's what Canton calls its flat wall and shelf series. So this is explicitly not a CD player, but a passive speaker that belongs to an amplifier. Black anodized, just 10 cm deep – and still a full-fledged two-way system for anyone who wants good sound without imposing bulky wooden boxes on the living room. You get it from us as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton CD 220.3?\u003c\/h2\u003e\n\u003cp\u003eInside the slim aluminum housing, a 110 mm aluminum woofer works together with a 25 mm aluminum tweeter dome, supported by a passive radiator based on the bass reflex principle. The result is a precise, cleanly organized sound that seems surprisingly mature for this build depth. The closed 2-way design keeps the mids clear and the highs refined – ideal for voices, acoustic music and anything that doesn't call for a bass storm.\u003c\/p\u003e\n\u003cp\u003eBecause the housing is only a hand's width deep, the CD 220.3 almost disappears on the wall. It's hard to overlook a speaker any more elegantly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-flat aluminum housing, black anodized, only 10 cm deep\u003c\/li\u003e\n\u003cli\u003eWall mount included – can be used on the wall or on a shelf\u003c\/li\u003e\n\u003cli\u003e2-way closed: 110 mm aluminum woofer + 25 mm aluminum tweeter\u003c\/li\u003e\n\u003cli\u003eFrequency response 45–30,000 Hz, efficiency 86.5 dB\u003c\/li\u003e\n\u003cli\u003ePower handling 50 W (nominal) \/ 120 W (music)\u003c\/li\u003e\n\u003cli\u003eMagnetically shielded – no issue even next to the TV\u003c\/li\u003e\n\u003cli\u003eRemovable grille front cover\u003c\/li\u003e\n\u003cli\u003eTerminal suitable for banana plugs\u003c\/li\u003e\n\u003cli\u003eDelivered as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton CD 220.3 suitable for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: The CD 220.3 is the right choice for small to medium rooms, as a space-saving stereo pair, as surround rears, or for the kitchen, office and bedroom, where a large box simply doesn't fit. If, on the other hand, you're looking for a deep bass foundation in a large living room, you should honestly add a subwoofer to the mix – 10 cm of build depth doesn't conjure up deep bass. Combined with an active sub, though, this little aluminum pair plays well above its weight class.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Canton CD 220.3 is an honest, design-strong compact speaker for anyone who takes a tidy look just as seriously as the sound. A note from Wädenswil: Canton now keeps the CD series in its archive; at HD Zürisee we're clearing remaining stock while supplies last. We're happy to work out with you in person which amplifier and subwoofer combination suits your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Compact speaker (wall or shelf placement)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Canton CD (Custom Design)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive radiator:\u003c\/strong\u003e Bass reflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange driver:\u003c\/strong\u003e 1× 110 mm aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,900 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 86.5 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 50 W \/ 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic shielding:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection terminal:\u003c\/strong\u003e suitable for banana plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum housing, black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront cover:\u003c\/strong\u003e Grille, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall mounting:\u003c\/strong\u003e Prepared, mount included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 14.5 × 21.5 × 10.0 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.0 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer's warranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional accessories:\u003c\/strong\u003e Canton speaker stand LS 250.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2× CD 220.3, 2× wall mount, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Canton CD 220.3 a CD player?\u003c\/h3\u003e\n\u003cp\u003eNo. At Canton, the abbreviation CD stands for Custom Design, the flat wall and shelf series. The CD 220.3 is a passive compact speaker without its own electronics: you connect it with speaker cable to an amplifier or AV receiver. The music is played from a separate source.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the Canton CD 220.3 on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes. The wall mount is included, and with 10 cm of build depth the speaker sits flat against the wall. Alternatively, you can place it on a sideboard or shelf. If you want to set it up freestanding, reach for the matching Canton speaker stand LS 250.2, available as an accessory.\u003c\/p\u003e\n\u003ch3\u003eDoes the Canton CD 220.3 need a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily for small rooms and normal volumes. However, the CD 220.3 stops below 45 Hz, so an active subwoofer is worthwhile for home cinema or bass-heavy music. The compact speaker is designed for precision and speech intelligibility, not deep bass.\u003c\/p\u003e\n\u003ch3\u003eIs the Canton CD 220.3 delivered singly or as a pair?\u003c\/h3\u003e\n\u003cp\u003eAs a pair. You get two speakers from us along with two wall mounts – suitable for a stereo setup or as a rear pair in home cinema. Canton itself sells the CD series individually; we put it together for you as a finished pair. If you need an odd number, just get in touch with us.\u003c\/p\u003e\n\u003ch3\u003eWhich amplifier suits the Canton CD 220.3?\u003c\/h3\u003e\n\u003cp\u003eAlmost any solid stereo amplifier or AV receiver. The nominal impedance is 4 to 8 ohms, the nominal power handling 50 watts, and the efficiency 86.5 dB. About 40 to 80 watts per channel gives the CD 220.3 enough headroom. We're happy to work out with you what suits your room.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton CD 220.3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause from years of experience we know which amplifier and which subwoofer suit such a slim speaker. We advise you personally, deliver and install at your home – and our technician Mauri is on hand for calibration or service. Call us or write to us.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAn \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e with some reserves, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, solid \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e and – for freestanding placement – matching \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e. You'll find more flat models under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989495279952,"sku":null,"price":458.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-cd-220-3-kompaktlautsprecher-aluminium-schwarz-frontansicht.png?v=1785852096"},{"product_id":"cantoncd220-3si","title":"Canton CD 220.3 Compact Speaker, Silver (Pair)","description":"\u003cp\u003eThe Canton CD 220.3 is an ultra-flat 2-way compact speaker made of aluminum, which you can hang on the wall thanks to the included wall mount or place classically on a shelf.\u003c\/p\u003e\n\u003cp\u003eRight up front, so there's no confusion: at Canton, CD means \u003cem\u003eCustom Design\u003c\/em\u003e, the flat series for wall and shelf – not a Compact Disc, no transport, no player. In silver anodized aluminum, the speaker looks especially light: 10 cm of build depth, a cleanly milled housing and a shape that doesn't push itself into the foreground. If you want sound but no bulky wooden boxes in the living room, this is the one. You get it from us as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton CD 220.3?\u003c\/h2\u003e\n\u003cp\u003eA 110 mm aluminum woofer and a 25 mm aluminum tweeter dome share the work, a passive radiator based on the bass reflex principle helps out in the bass. The closed 2-way design ensures clean mids and refined highs – voices, guitars and strings come through clear and unobtrusive. For a housing of this size, it sounds surprisingly mature.\u003c\/p\u003e\n\u003cp\u003eAnd because the aluminum housing is only a hand's width deep, the CD 220.3 barely stands out on the wall. Honestly: rarely has so much sound needed so little space.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-flat aluminum housing, silver anodized, only 10 cm deep\u003c\/li\u003e\n\u003cli\u003eWall mount included – can be used on the wall or on a shelf\u003c\/li\u003e\n\u003cli\u003e2-way closed: 110 mm aluminum woofer + 25 mm aluminum tweeter\u003c\/li\u003e\n\u003cli\u003eFrequency response 45–30,000 Hz, efficiency 86.5 dB\u003c\/li\u003e\n\u003cli\u003ePower handling 50 W (nominal) \/ 120 W (music)\u003c\/li\u003e\n\u003cli\u003eMagnetically shielded – no problem even right next to the TV\u003c\/li\u003e\n\u003cli\u003eRemovable grille front cover\u003c\/li\u003e\n\u003cli\u003eTerminal suitable for banana plugs\u003c\/li\u003e\n\u003cli\u003eDelivered as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton CD 220.3 suitable for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: Ideal for small and medium rooms – as a slim stereo pair, as surround rears in home cinema, or wherever a classic box simply finds no room: kitchen, office, bedroom, hallway. If, on the other hand, you're looking for a rich bass foundation in a large living room, you'd better plan for a subwoofer right away – no deep bass comes out of 10 cm of build depth. Combined with an active sub, though, this slim aluminum pair plays well above its weight class.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA design-strong compact speaker for anyone to whom the look of their living space matters just as much as clean sound – unassuming, well built, honestly tuned. For your info: Canton now keeps the CD series in its archive; at HD Zürisee in Wädenswil the remaining stock is going out while supplies last. We're happy to discuss with you directly which amplifier and subwoofer suit it.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Compact speaker (wall or shelf placement)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Canton CD (Custom Design)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive radiator:\u003c\/strong\u003e Bass reflex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange driver:\u003c\/strong\u003e 1× 110 mm aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,900 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 86.5 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 50 W \/ 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic shielding:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection terminal:\u003c\/strong\u003e suitable for banana plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum housing, silver anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront cover:\u003c\/strong\u003e Grille, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall mounting:\u003c\/strong\u003e Prepared, mount included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 14.5 × 21.5 × 10.0 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.0 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer's warranty:\u003c\/strong\u003e 5 years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional accessories:\u003c\/strong\u003e Canton speaker stand LS 250.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2× CD 220.3, 2× wall mount, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes CD in the Canton CD 220.3 mean a CD player?\u003c\/h3\u003e\n\u003cp\u003eNo, at Canton CD means Custom Design – the flat series for wall and shelf. The CD 220.3 is a passive speaker that needs an amplifier or AV receiver. There's no disc drive or disc mechanism in this device.\u003c\/p\u003e\n\u003ch3\u003eCan the Canton CD 220.3 be mounted on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes, the mount is included in the delivery. With 10 cm of build depth, the speaker barely stands out on the wall. It also stands equally well on a shelf or sideboard. For freestanding placement, Canton offers the LS 250.2 speaker stand as an accessory.\u003c\/p\u003e\n\u003ch3\u003eIs the Canton CD 220.3 enough without a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eQuite well in small to medium rooms and at normal volumes. The frequency response ends at 45 Hz on the low end, so an active subwoofer is recommended for home cinema or bass-heavy music. The CD 220.3 focuses on precision and clear voices rather than deep bass – with a sub behind it, it noticeably plays with more confidence.\u003c\/p\u003e\n\u003ch3\u003eDo I get one or two speakers with the Canton CD 220.3?\u003c\/h3\u003e\n\u003cp\u003eTwo. We deliver the model as a pair, including both wall mounts – ideal for a stereo setup or as a rear pair in home cinema. Canton itself sells the CD series individually; we put the pair together for you complete. Want a different quantity? Let us know.\u003c\/p\u003e\n\u003ch3\u003eHow much amplifier power does the Canton CD 220.3 need?\u003c\/h3\u003e\n\u003cp\u003eAbout 40 to 80 watts per channel is a good guideline. The nominal power handling is 50 watts, the nominal impedance 4 to 8 ohms, the efficiency 86.5 dB – so any solid stereo amplifier and practically any AV receiver copes with it. We're happy to advise on the combination.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton CD 220.3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you what suits your room and your décor, instead of leaving you alone with datasheets. Our experienced team in Wädenswil handles advice, delivery and installation, and technician Mauri takes care of calibration and service. Call us or write to briefly tell us what you have in mind.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAn \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e with a bit of reserve, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e and, for freestanding placement, matching \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e. More flat models can be found under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989495312720,"sku":null,"price":458.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-cd-220-3-kompaktlautsprecher-aluminium-silber-frontansicht.jpg?v=1785852096"},{"product_id":"cantontownus10bl","title":"Canton Townus 10 On-Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton Townus 10 is an on-wall speaker that sits flat against the wall at just 9.7 cm deep, yet still performs as a full-fledged 2-way system.\u003c\/p\u003e\n\u003cp\u003eIn gloss black, it takes its place next to a dark TV without cluttering the room. Canton supplies it as a pair: two speakers, one box. Made for anyone who wants sound brought to the wall instead of directing floorstanding speakers around the sofa.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus 10?\u003c\/h2\u003e\n\u003cp\u003eInside the flat housing works a 154 mm mid-woofer with a titanium diaphragm and a long-throw wave surround, topped by a 25 mm aluminium-oxide ceramic dome tweeter. The 2-way system is built as a sealed design – no reflex port that would start booming close to a wall. The crossover sits at 3,200 Hz, and the tweeter reaches up to 40,000 Hz. The drivers sit screwless in the housing, and the oval fabric cover holds on magnetically. What's left visible is a calm surface – nothing more.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eThe wall bracket is built into the housing, so you need no extra parts. Feet are included in case the pair ends up on the sideboard after all. 60 watts rated power and 100 watts music power comfortably cover living-room levels, and an impedance of 4 to 8 ohms is an easy load for any decent stereo or AV amplifier. It reaches down to 45 Hz – impressive for this depth, and the moment a subwoofer comes into play for cinema explosions.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus 10 for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the Townus 10 is the right choice as a space-saving stereo pair in smaller rooms, as an unobtrusive rear pair in a home cinema, or anywhere a deep box simply won't fit against the wall. If you want a full foundation in a large room, plan for a subwoofer – you can't conjure deep bass out of 9.7 cm of depth, no amount of persuasion changes that. As a slim all-rounder on the wall, though, hardly anything beats it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Canton Townus 10 brings Townus technology and clean lacquer finishing into a housing that almost disappears on the wall. Paired with the larger Townus models, it shows its strengths best. Which combination suits your room is something we're happy to work out together at HD Zürisee in Wädenswil – call or write to us.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton Townus 10\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e on-wall speaker, wall-mountable or freestanding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way sealed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm titanium with wave surround\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm aluminium-oxide ceramic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e not stated by Canton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated wall bracket; feet for shelf or sideboard use included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCover:\u003c\/strong\u003e oval fabric cover, magnetic attachment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e gloss black, lacquered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 19 × 29.5 × 9.7 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (two speakers)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Townus 10 (pair), feet, oval fabric cover, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I mount the Townus 10 directly on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes. The wall bracket is built into the housing, so you need no extra accessories. At 9.7 cm deep, the speaker sits flat against the wall. If you'd rather place it freestanding, use the included feet and set it on a shelf or sideboard.\u003c\/p\u003e\n\u003ch3\u003eIs the Townus 10 supplied singly or as a pair?\u003c\/h3\u003e\n\u003cp\u003eAs a pair. This listing is for two speakers, and Canton packages the Townus 10 in pairs too. For stereo, one set is all you need. If you're building a home cinema, use the pair as rears and add a matching centre channel.\u003c\/p\u003e\n\u003ch3\u003eDoes the Townus 10 need a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily in small rooms – the sealed housing reaches down to 45 Hz. In a larger living room, and especially in a home cinema, it gains noticeably once an active subwoofer takes over the low end. Physics simply can't be outsmarted with 9.7 cm of depth.\u003c\/p\u003e\n\u003ch3\u003eWhich amplifier suits the Townus 10?\u003c\/h3\u003e\n\u003cp\u003eAny solid stereo or AV amplifier that drives 4 to 8 ohms stably. Rated power handling is 60 watts, music power handling 100 watts. Reserves never hurt, but the Townus 10 doesn't need a huge power amp either. Which combination suits your room is something we're happy to discuss with you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus 10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know how to integrate a flat on-wall speaker into an existing system: amplifier, cable runs, wall position. We advise you by phone, on WhatsApp or in person in Wädenswil, deliver and install on site, and our technician Mauri handles calibration and service.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eDrive it with a \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e, add a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, more \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e for a multi-channel expansion, and decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e to tie it together. More flat models are found under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eon-wall speakers\u003c\/a\u003e, the brand's full range at \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497344336,"sku":null,"price":878.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-10-on-wall-lautsprecher-schwarz-frontansicht.png?v=1785852128"},{"product_id":"cantontownus10wh","title":"Canton Townus 10 On-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton Townus 10 is an on-wall speaker that sits flat against the wall at just 9.7 cm deep, yet still performs as a full-fledged 2-way system.\u003c\/p\u003e\n\u003cp\u003eWhite satin is the most understated of the three finishes: against a bright wall you mostly notice the music, not the box. Canton supplies the Townus 10 as a pair – two speakers in one box. For living rooms with no room for floorstanders, but every expectation of good sound.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus 10?\u003c\/h2\u003e\n\u003cp\u003eBehind the slim front sits a 154 mm mid-woofer with a titanium diaphragm and a long-throw wave surround, plus a 25 mm aluminium-oxide ceramic dome tweeter. The 2-way system runs sealed – so no reflex port that would quickly start booming near a wall. The crossover sits at 3,200 Hz, and the tweeter reaches up to 40,000 Hz. Drivers with no visible screws, an oval fabric cover held on magnetically: the look stays as calm as the wall behind it.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eThe wall bracket is already built into the housing, no off-the-shelf accessories needed. If you'd rather put the pair on a shelf, use the included feet. 60 watts rated power and 100 watts music power confidently cover living-room levels, and at 4 to 8 ohms the Townus 10 is an easy load for any decent stereo or AV amplifier. It reaches down to 45 Hz.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus 10 for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: ideal as a space-saving stereo pair in smaller rooms, as a discreet rear pair in a home cinema, and anywhere a deep box on the wall simply won't work. If you want the full foundation in a generous room, plan for a subwoofer from the start – 9.7 cm of depth is no bass-reflex cabinet, and this speaker was never meant to be one. As a flat all-rounder on the wall, though, it has little competition.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Canton Townus 10 in white is the speaker for anyone who wants to listen, not look: cleanly lacquered, flat, and a coherent home cinema once combined with the larger Townus models. Tell us about your room – at HD Zürisee in Wädenswil we'll put together the right combination for you.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton Townus 10\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e on-wall speaker, wall-mountable or freestanding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way sealed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm titanium with wave surround\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm aluminium-oxide ceramic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e not stated by Canton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated wall bracket; feet for shelf or sideboard use included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCover:\u003c\/strong\u003e oval fabric cover, magnetic attachment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e white satin, lacquered\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 19 × 29.5 × 9.7 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (two speakers)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Townus 10 (pair), feet, oval fabric cover, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I mount the Townus 10 directly on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes, with no extra parts. The bracket is built into the housing, and at 9.7 cm deep the speaker barely stands proud of the wall. Alternatively, use the included feet and set it on a shelf or sideboard – Canton explicitly supports both setups.\u003c\/p\u003e\n\u003ch3\u003eIs the Townus 10 supplied singly or as a pair?\u003c\/h3\u003e\n\u003cp\u003eAs a pair. You get two speakers, exactly as Canton packages the Townus 10. That's enough for a stereo system with one set. In a home cinema, the pair typically takes the rear channels while larger Townus models play up front.\u003c\/p\u003e\n\u003ch3\u003eDoes the Townus 10 need a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily in a small room – the sealed housing plays down to 45 Hz and sounds surprisingly grown-up doing it. Once the room gets bigger or film sound comes into play, an active subwoofer is worthwhile, taking over the low end and relieving the small titanium diaphragms.\u003c\/p\u003e\n\u003ch3\u003eWhich amplifier suits the Townus 10?\u003c\/h3\u003e\n\u003cp\u003eA stereo or AV amplifier that drives 4 to 8 ohms cleanly is entirely sufficient. Rated power handling 60 watts, music power handling 100 watts – healthy power reserves are welcome, but no monster power amp is required. Tell us what's already in your rack, and we'll tell you if it fits.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus 10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with on-wall speakers the details decide: height, angle, distance to the corner, cable routing behind the wall. We go through this with you, by phone, WhatsApp or in the shop in Wädenswil. Delivery, installation and calibration are handled by our technician Mauri on request.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eDrive is supplied by an \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e, the foundation by a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e. For multi-channel, more \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e complete the picture, connected with decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e. Alternatives in a flat design are found under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eon-wall speakers\u003c\/a\u003e, the brand's remaining range at \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497377104,"sku":null,"price":878.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-10-on-wall-lautsprecher-weiss-frontansicht.png?v=1785852284"},{"product_id":"cantontownus10wn","title":"Canton Townus 10 On-Wall Speaker, Walnut (Pair)","description":"\u003cp\u003eThe Canton Townus 10 is an on-wall speaker that sits flat against the wall at just 9.7 cm deep, yet still performs as a full-fledged 2-way system.\u003c\/p\u003e\n\u003cp\u003eThe walnut version wears real wood veneer instead of lacquer – the grain turns the flat housing into more of a piece of furniture than a piece of technology. Canton supplies the Townus 10 as a pair, two speakers per box. Made for living rooms where technology should blend in without giving up ground on sound.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus 10?\u003c\/h2\u003e\n\u003cp\u003eUnder the veneer works a 154 mm mid-woofer with a titanium diaphragm and a long-throw wave surround, complemented by a 25 mm aluminium-oxide ceramic dome tweeter. The 2-way build is sealed, which makes it forgiving right against a wall – a reflex port would quickly start booming there. The crossover sits at 3,200 Hz, the tweeter reaches up to 40,000 Hz. The drivers are set in screwless, and the oval fabric cover attaches magnetically and lifts off without leaving holes behind.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eWall bracket built in, no extra accessories needed; feet are included for freestanding use. 60 watts rated power and 100 watts music power are ample for what actually happens in a living room, and 4 to 8 ohms won't trouble any decent stereo or AV amplifier. The frequency range starts at 45 Hz – below that, a subwoofer is best placed in charge.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus 10 for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the Townus 10 fits as a space-saving stereo pair in smaller rooms, as a restrained rear pair in a home cinema, and anywhere a deep box on the wall has no chance. If you expect a full foundation in a large room, pair it with an active subwoofer – no deep bass comes out of 9.7 cm of depth, however convincing the product description might sound. As a flat all-rounder with real wood veneer, though, it stands pretty much alone.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eWalnut veneer on an on-wall speaker is rare, and the Canton Townus 10 makes the most of it: on the wall it looks like furnishing, not retrofitting. Sonically, it's roundest as part of a Townus set. If you want to know whether it suits your room and system, reach out to HD Zürisee in Wädenswil – we'll go through it with you.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton Townus 10\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e on-wall speaker, wall-mountable or freestanding\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way sealed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm titanium with wave surround\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm aluminium-oxide ceramic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e not stated by Canton\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWall mounting:\u003c\/strong\u003e integrated wall bracket; feet for shelf or sideboard use included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCover:\u003c\/strong\u003e oval fabric cover, magnetic attachment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e real walnut veneer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 19 × 29.5 × 9.7 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.5 kg per speaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (two speakers)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Townus 10 (pair), feet, oval fabric cover, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I mount the Townus 10 directly on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes. The wall bracket is part of the housing, so extra bracket purchases aren't needed. At 9.7 cm deep, the speaker stays close to the wall. If you'd rather place it freestanding, fit the included feet underneath and set it on a shelf or sideboard.\u003c\/p\u003e\n\u003ch3\u003eIs the Townus 10 supplied singly or as a pair?\u003c\/h3\u003e\n\u003cp\u003eAs a pair. Two speakers belong together in one box, as Canton states in the package contents. That covers everything for stereo; in a home cinema, the pair usually takes the surround channels while larger models in the Townus range work up front.\u003c\/p\u003e\n\u003ch3\u003eDoes the Townus 10 need a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eIn small to medium rooms it manages without – after all, the sealed housing reaches down to 45 Hz. For film sound and larger rooms, an active subwoofer is the more sensible solution: it takes the strain off the mid-woofer and keeps the midrange clean.\u003c\/p\u003e\n\u003ch3\u003eWhich amplifier suits the Townus 10?\u003c\/h3\u003e\n\u003cp\u003eAny stereo or AV amplifier with stable output at 4 to 8 ohms. Rated power handling is 60 watts, music power handling 100 watts – that makes the Townus 10 undemanding in choice of amplifier, yet appreciative of clean power. Tell us what's in your rack.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus 10 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we've seen for decades which combinations work in everyday use and which only look good on paper. We advise you personally on room, wall position and system, by phone, WhatsApp or in Wädenswil. Installation, calibration and service are handled by our own technician Mauri.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAn \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e as the driver, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for depth, and more \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e for expansion complete the picture. It's all tied together with good \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e. More flat models are found under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eon-wall speakers\u003c\/a\u003e, the full range at \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497409872,"sku":null,"price":918.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-10-on-wall-lautsprecher-nussbaum-frontansicht.png?v=1785852313"},{"product_id":"cantontownusar5bl","title":"Canton Townus AR 5 Dolby Atmos Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton Townus AR 5 is a Dolby Atmos add-on speaker that fires its sound upward, using the ceiling's reflection to bring a height layer into your home cinema.\u003c\/p\u003e\n\u003cp\u003eIn glossy black, it all but disappears on top of your front or rear speakers – and if there's no room there, it moves to the wall thanks to its integrated bracket. It's supplied in pairs, because a height layer with only one side makes about as much sense as stereo with one speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus AR 5?\u003c\/h2\u003e\n\u003cp\u003eBecause it's the shortcut to Dolby Atmos without anyone cutting open your ceiling. The AR 5 is a licensed Dolby Enabled Speaker: a 154 mm titanium-diaphragm woofer and a 25 mm ceramic dome sit in a sealed two-way enclosure, firing upward at exactly the angle the ceiling needs to bounce the sound back to your seat. It's voiced to match the Townus series, so effects from above blend seamlessly with what's happening up front.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you experience\u003c\/h2\u003e\n\u003cp\u003eRain that actually falls on you. Helicopters crossing the room diagonally. Reverb that opens upward instead of bouncing off the ceiling of the room you're in. The AR 5 turns a flat surround layer into a space with real volume – and does it with remarkable restraint: as long as nothing is happening above you, it stays acoustically invisible. That's exactly how a height layer should work.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus AR 5 for?\u003c\/h3\u003e\n\u003cp\u003ePlainly put: for anyone wanting to add real height channels to an existing home cinema without any construction work. You'll need an AV receiver or AV amplifier with Dolby Atmos decoding and two free amplifier channels. If you only listen in stereo, you don't need it. And if you're sitting under a six-metre gallery ceiling or a heavily damped wooden ceiling, talk to us first – the reflection principle loses some of its effect there.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe AR 5 is the most elegant compromise between \"no Atmos at all\" and \"cutting into the ceiling.\" It sounds clean, blends into the Townus sound signature, and is set up in ten minutes. At HD Zürisee in Wädenswil, we look at your room together beforehand – ceiling height and seating distance matter more here than any spec sheet.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Dolby Atmos add-on speaker (licensed Dolby Enabled Speaker)\u003c\/li\u003e\n\u003cli\u003eAcoustic principle: 2-way, sealed\u003c\/li\u003e\n\u003cli\u003eWoofer: 1× 154 mm titanium (wave surround)\u003c\/li\u003e\n\u003cli\u003eTweeter: 1× 25 mm ceramic\u003c\/li\u003e\n\u003cli\u003eFrequency range: 50–30,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,200 Hz\u003c\/li\u003e\n\u003cli\u003eNominal\/music power handling: 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eConnection: 24-carat gold-plated screw terminals\u003c\/li\u003e\n\u003cli\u003ePlacement: on top of a floorstanding speaker or wall-mounted (bracket included)\u003c\/li\u003e\n\u003cli\u003eFinish: gloss black, lacquered\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 17 × 14.5 × 26 cm (lying flat)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6 kg per speaker\u003c\/li\u003e\n\u003cli\u003eSales unit: pair (two speakers)\u003c\/li\u003e\n\u003cli\u003eIncluded: 2× Townus AR 5, feet, oval fabric covers, instruction manual (speaker cable not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does a Dolby Atmos add-on speaker work?\u003c\/h3\u003e\n\u003cp\u003eIt radiates sound upward at a defined angle, and the room's ceiling reflects it back down to your seating position. Your hearing locates the sound as coming from above you. This creates a height layer without needing speakers built into the ceiling or cables run through it.\u003c\/p\u003e\n\u003ch3\u003eDo I need a special amplifier for the AR 5?\u003c\/h3\u003e\n\u003cp\u003eYes. You need an AV receiver or AV amplifier that decodes Dolby Atmos and has two free amplifier channels for the height layer. In its setup, you select the speakers as Dolby Enabled Speakers so the reflection is calculated correctly. A plain stereo amplifier isn't enough.\u003c\/p\u003e\n\u003ch3\u003eIs the Townus AR 5 supplied singly or as a pair?\u003c\/h3\u003e\n\u003cp\u003eAs a pair. Canton sells the AR 5 as a speaker pair, so the sales and shipping unit is two speakers – a height layer consists of a left and a right channel anyway. Planning a 7.1.4 system with four height channels? You'll need two pairs.\u003c\/p\u003e\n\u003ch3\u003eWhat kind of ceiling does the AR 5 need for the effect to work?\u003c\/h3\u003e\n\u003cp\u003eIdeally a flat, smooth, acoustically hard ceiling at normal room height, roughly 2.4 to 3 metres. Sloped ceilings, open galleries, wood panelling, or acoustic sails absorb or scatter the reflection and weaken the height effect. In such rooms, we'll check beforehand whether real in-ceiling speakers are the better solution.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus AR 5 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause Atmos in practice lives and dies by the room, the ceiling, and the seating position – and we've been setting that up in real living rooms for decades, not just on paper. We'll tell you honestly whether the AR 5 will work for you, deliver it, install it, and calibrate your home cinema properly with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe rest of the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e family for the foundation, matching \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for deep bass, and proper \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e so the height channels arrive cleanly too.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497737552,"sku":null,"price":898.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-ar-5-dolby-atmos-lautsprecher-schwarz-schraegansicht.png?v=1785863072"},{"product_id":"cantontownusar5wh","title":"Canton Townus AR 5 Dolby Atmos Speaker, White (Pair)","description":"\u003cp\u003eThe Canton Townus AR 5 is a Dolby Atmos add-on speaker that fires upward, using the room's ceiling as a mirror to build a height layer above your seating position.\u003c\/p\u003e\n\u003cp\u003eThe satin white finish is the most unobtrusive of the three: on light-coloured speakers or against a white wall, you'll barely notice it. The AR 5 sits on top of your front or rear speakers, or alternatively hangs on the wall via its integrated bracket. It's sold in pairs.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus AR 5?\u003c\/h2\u003e\n\u003cp\u003eBecause it gets you Dolby Atmos without calling in a tradesman. As a licensed Dolby Enabled Speaker, the AR 5 works with a 154 mm titanium woofer and a 25 mm ceramic dome in a sealed two-way enclosure. The radiation angle is chosen so the ceiling reflects the sound precisely back to your seat. Because the voicing matches the Townus series, effects from above don't sound like a foreign body but like a continuation upward.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you experience\u003c\/h2\u003e\n\u003cp\u003eA ceiling that suddenly joins in. A thunderstorm passes over you instead of past you, churches and halls gain height, and dialogue stands more freely in the room because the reverb no longer sticks to one plane. The appeal lies in its restraint: the AR 5 never pushes to the front – you only notice its absence once you switch it off again.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus AR 5 for?\u003c\/h3\u003e\n\u003cp\u003eHonestly: for home cinema fans expanding their system who don't want to open up a ceiling. You'll need an AV receiver or AV amplifier with Atmos decoding and two free amplifier channels. Pure stereo listeners can safely skip it. And with sloped ceilings, open galleries, or heavily damped ceilings, a chat beforehand is worthwhile – the reflection principle needs a surface that plays along.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eSmall, unobtrusive, effective: the AR 5 delivers exactly the dimension missing from a surround setup without ceiling speakers. Be honest – when did you last really expand your home cinema instead of just using it? At HD Zürisee in Wädenswil, we look at what your ceiling can offer beforehand, rather than selling you something that won't work in your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Dolby Atmos add-on speaker (licensed Dolby Enabled Speaker)\u003c\/li\u003e\n\u003cli\u003eAcoustic principle: 2-way, sealed\u003c\/li\u003e\n\u003cli\u003eWoofer: 1× 154 mm titanium (wave surround)\u003c\/li\u003e\n\u003cli\u003eTweeter: 1× 25 mm ceramic\u003c\/li\u003e\n\u003cli\u003eFrequency range: 50–30,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,200 Hz\u003c\/li\u003e\n\u003cli\u003eNominal\/music power handling: 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eConnection: 24-carat gold-plated screw terminals\u003c\/li\u003e\n\u003cli\u003ePlacement: on top of a floorstanding speaker or wall-mounted (bracket included)\u003c\/li\u003e\n\u003cli\u003eFinish: satin white, lacquered\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 17 × 14.5 × 26 cm (lying flat)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6 kg per speaker\u003c\/li\u003e\n\u003cli\u003eSales unit: pair (two speakers)\u003c\/li\u003e\n\u003cli\u003eIncluded: 2× Townus AR 5, feet, oval fabric covers, instruction manual (speaker cable not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between an Atmos add-on speaker and a ceiling speaker?\u003c\/h3\u003e\n\u003cp\u003eThe add-on speaker stands visibly in the room and works via ceiling reflection; the ceiling speaker is built in and radiates straight down. Acoustically, the built-in version is a touch more precise, but the AR 5 is ready to use immediately, moves house with you, and needs no structural work.\u003c\/p\u003e\n\u003ch3\u003eWhat amplifier does the AR 5 need?\u003c\/h3\u003e\n\u003cp\u003eAn AV receiver or AV amplifier with Dolby Atmos decoding and two free amplifier channels. It's important to declare the channels as height or Dolby Enabled speakers in the setup – only then does the calibration factor in the ceiling reflection. Atmos won't work with a stereo amplifier.\u003c\/p\u003e\n\u003ch3\u003eDo I get one or two speakers?\u003c\/h3\u003e\n\u003cp\u003eTwo. Canton supplies the Townus AR 5 as a pair, because a height layer consists of a left and a right channel. For a 7.1.4 setup with four height channels, you'll need two pairs accordingly – just let us know and we'll set up the order.\u003c\/p\u003e\n\u003ch3\u003eCan I also mount the AR 5 on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes, the wall bracket is already integrated, so you need no extra accessories. That also lets you use it as an effect or rear speaker if there's no room on top of the main speakers. For the Atmos effect, it should still be able to radiate freely upward.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus AR 5 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we plan home cinemas in the room, not from a catalogue. We've been in Wädenswil since 1997, tell you honestly beforehand whether your ceiling is suited to Atmos, deliver to your home, install, and calibrate the height channels with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe rest of the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e from the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e range, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, plus \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e in the right length – and if the whole \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003ehome cinema\u003c\/a\u003e is being built from scratch, we'll plan it with you from the ground up.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497770320,"sku":null,"price":898.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-ar-5-dolby-atmos-lautsprecher-weiss-schraegansicht.png?v=1785863072"},{"product_id":"cantontownusar5wn","title":"Canton Townus AR 5 Dolby Atmos Speaker, Walnut (Pair)","description":"\u003cp\u003eThe Canton Townus AR 5 is a Dolby Atmos add-on speaker that sends its sound up to the ceiling and back down to your seat as a height channel.\u003c\/p\u003e\n\u003cp\u003eThis version wears real walnut veneer – the option for living rooms where technology is allowed to look like furniture. It sits on top of your front or rear speakers, or hangs on the wall via its integrated bracket. Always supplied as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Townus AR 5?\u003c\/h2\u003e\n\u003cp\u003eBecause it brings the third dimension to your home cinema without anyone opening up the ceiling. Behind the veneer sits a licensed Dolby Enabled Speaker: sealed two-way enclosure, 154 mm woofer with titanium diaphragm and wave surround, topped by a 25 mm ceramic dome. The radiation angle is calculated for the ceiling reflection, and the voicing matches the Townus series. The result: height effects that tonally match the rest of your system instead of standing apart.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you experience\u003c\/h2\u003e\n\u003cp\u003eA room that opens upward. A plane crosses above you, rain falls from above instead of from the front, and concert recordings regain the ceiling height that a pure surround layer swallows. What's remarkable is how natural it feels: no barrage of effects, simply the missing axis – one you instantly miss once you've had it.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Townus AR 5 for?\u003c\/h3\u003e\n\u003cp\u003ePlainly put: for anyone who already has a surround system and wants to lift it to Atmos without running cables through the ceiling. You'll need an AV receiver or AV amplifier with Atmos decoding and two free amplifier channels. If you only listen to music in stereo, you simply don't need it. And with high, sloped, or heavily damped ceilings, let's discuss the alternatives beforehand.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe AR 5 in walnut is the rare case where an effects speaker still looks good even when the projector is off. Cleanly integrated sonically, mounted in fifteen minutes, acoustically dependent on your ceiling. That's exactly the point we'd rather clarify with you beforehand at HD Zürisee – Wädenswil is closer than you think.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Dolby Atmos add-on speaker (licensed Dolby Enabled Speaker)\u003c\/li\u003e\n\u003cli\u003eAcoustic principle: 2-way, sealed\u003c\/li\u003e\n\u003cli\u003eWoofer: 1× 154 mm titanium (wave surround)\u003c\/li\u003e\n\u003cli\u003eTweeter: 1× 25 mm ceramic\u003c\/li\u003e\n\u003cli\u003eFrequency range: 50–30,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,200 Hz\u003c\/li\u003e\n\u003cli\u003eNominal\/music power handling: 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eConnection: 24-carat gold-plated screw terminals\u003c\/li\u003e\n\u003cli\u003ePlacement: on top of a floorstanding speaker or wall-mounted (bracket included)\u003c\/li\u003e\n\u003cli\u003eFinish: real walnut veneer\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 17 × 14.5 × 26 cm (lying flat)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.6 kg per speaker\u003c\/li\u003e\n\u003cli\u003eSales unit: pair (two speakers)\u003c\/li\u003e\n\u003cli\u003eIncluded: 2× Townus AR 5, feet, oval fabric covers, instruction manual (speaker cable not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow does the AR 5 create sound from above?\u003c\/h3\u003e\n\u003cp\u003eThrough reflection. The speaker radiates at a defined angle against the room's ceiling, from where the sound travels to your seat. Your hearing therefore locates the source above you. The advantage: no cutting into the ceiling, no cables to run, no structural work.\u003c\/p\u003e\n\u003ch3\u003eWhat electronics do I need for it?\u003c\/h3\u003e\n\u003cp\u003eAn AV receiver or AV amplifier that decodes Dolby Atmos and has two free amplifier channels left over. In the setup, you register the two channels as Dolby Enabled or height speakers so the automatic calibration factors in the reflection correctly. A stereo integrated amplifier can't do Atmos.\u003c\/p\u003e\n\u003ch3\u003eHow many speakers do I get per order?\u003c\/h3\u003e\n\u003cp\u003eTwo pieces, i.e. a pair – that's how Canton sells the Townus AR 5. Anyone building a 7.1.4 system with four height channels accordingly needs two pairs. Get in touch and we'll put together a delivery to match, and sort out the necessary cable runs at the same time.\u003c\/p\u003e\n\u003ch3\u003eDoes the AR 5 also work with speakers from other brands?\u003c\/h3\u003e\n\u003cp\u003eYes. Sonically it's voiced to match the Townus series, but as a height channel it works equally well with other systems, as long as the AV amplifier calibrates the levels. More important than the brand is the mounting height and the ceiling material – those determine the effect.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Townus AR 5 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause nearly three decades of practical experience tell us when Atmos add-on speakers convince and when built-in ceiling speakers are the better choice. You get that assessment from us upfront, plus delivery, installation, and proper calibration of your home cinema by our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching \u003ca href=\"\/en-ch\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e from the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e range, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for deep bass, and \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e in the right length for the height channels.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":52989497803088,"sku":null,"price":918.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-townus-ar-5-dolby-atmos-lautsprecher-nussbaum-schraegansicht.png?v=1785863118"},{"product_id":"daliopticonlcrmk2black","title":"DALI Opticon LCR MK2 On-Wall Speaker, Black (Each)","description":"\u003cp\u003eThe DALI Opticon LCR MK2 in Black Ash is a flat on-wall speaker that works as a left, right or centre channel.\u003c\/p\u003e\n\u003cp\u003e128 millimetres of depth – it won't take up much more space than that. Yet it still packs the complete Opticon technology: a 165 mm woofer\/midrange with a wood fibre cone and SMC magnet system, plus a hybrid tweeter module made up of a 29 mm fabric dome and a 17 × 45 mm ribbon. The module can be rotated, so the dispersion is correct whichever way the speaker is mounted – upright as L\/R, or sideways as the centre channel.\u003c\/p\u003e\n\u003ch2\u003eWhy the Opticon LCR MK2?\u003c\/h2\u003e\n\u003cp\u003eBecause it delivers genuine hi-fi sound while almost disappearing on the wall – especially thoroughly in Black Ash against a dark TV wall. The cabinet, with its 25 mm thick baffle and additional internal bracing, is significantly stiffer than its slim silhouette suggests. The bass reflex port channels airflow along the wall rather than against it. Three identical LCRs side by side create a front that sounds the same from left to right – you'll notice it immediately in film dialogue.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eVoices that stand out front instead of sticking to the wall. The treble reveals detail without hissing: the fabric dome works up to 14 kHz, above which the ribbon takes over. Down low it reaches 70 Hz, dry and clean rather than thickened – remarkably substantial for 128 millimetres of depth. If you also want to feel the impact in your home cinema, add a subwoofer. That's what the LCR is designed to work with, not against.\u003c\/p\u003e\n\u003ch3\u003eWho is the Opticon LCR MK2 for?\u003c\/h3\u003e\n\u003cp\u003eBottom line: for anyone who wants good sound without towers in the living room. As a stereo pair on the wall, as a centre channel under the TV, or as a complete LCR front – it's always the same speaker. It's not the right choice if you expect deep bass below 70 Hz without a subwoofer, or want to place it freely on a shelf: it relies on the wall behind it. And screws or wall plugs aren't included – the wall has a say too.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe best on-wall speaker is the one you stop noticing after two weeks yet still hear. That's exactly the Opticon LCR MK2: a fully grown hi-fi speaker disguised as a piece of furniture. The trade press agrees – “With the new Opticon LCR MK2, Dali impressively shows that on-walls are a genuine alternative to soundbars and conventional speakers.” (lite-magazin.de, February 2022, top marks). At HD Zürisee in Wädenswil, we think it's the most honest answer to the question “soundbar or real speakers?”.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e 2 + ½-way, bass reflex (port fires along the wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 70 – 30,000 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 89 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 109 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 30 – 150 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 1 × 165 mm (6½ in), wood fibre cone, SMC magnet system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e rotatable hybrid module – 29 mm fabric dome + 17 × 45 mm ribbon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 2,800 \/ 14,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle:\u003c\/strong\u003e 25 mm, additional internal bracing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e 2 gold-plated binding posts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 482 × 285 × 128 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Ash (also available in the series: Satin White, Tobacco Oak)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e single speaker, fabric front cover, rubber feet, instruction manual (wall-mounting hardware not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need three different models for left, right and centre?\u003c\/h3\u003e\n\u003cp\u003eNo, you use the same Opticon LCR MK2 three times over. For the sideways-mounted centre channel, you rotate the hybrid tweeter module by 90 degrees so the dispersion is correct again. That way the whole front sounds identical – the biggest advantage of a genuine LCR solution. You don't need a separate centre model.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the Opticon LCR MK2 play on the wall?\u003c\/h3\u003e\n\u003cp\u003eDown to 70 Hz (±3 dB) – a very good figure for a 128 millimetre flat speaker. The port fires along the wall rather than against it, which keeps the bass clean. For home cinema with real depth you'd still plan for a subwoofer, but for music in the living room it's usually more than enough.\u003c\/p\u003e\n\u003ch3\u003eIs the Opticon LCR MK2 sold individually?\u003c\/h3\u003e\n\u003cp\u003eYes, the price is per unit. That way you can put together exactly the configuration your room needs: two as a stereo pair, three as a complete LCR front, five for surround. We're happy to work out the right number with you.\u003c\/p\u003e\n\u003ch3\u003eIs wall-mounting hardware included?\u003c\/h3\u003e\n\u003cp\u003eNo. The box contains the instruction manual, rubber feet and the fabric front cover – you choose screws and wall plugs to match your wall. Concrete, plasterboard and stud walls each call for different fixings, and 8 kilograms needs to hang securely. Our technician Mauri can handle the installation on-site if you'd like.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the DALI Opticon LCR MK2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with an on-wall speaker, the installation decides the result. We're an authorised dealer in Wädenswil, we advise you on height, spacing and orientation, and we install on-site if you'd like – with Mauri, our own technician. Call us: +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find further flat models under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eOn-Wall Speakers\u003c\/a\u003e, the matching depth under \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e. Matching electronics are in \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eIntegrated Amplifiers\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003eHome Cinema\u003c\/a\u003e section, the whole brand in the \u003ca href=\"\/en-ch\/collections\/dali\"\u003eDALI\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"DALI","offers":[{"title":"Default Title","offer_id":52989503766864,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dali-opticon-lcr-mk2-on-wall-lautsprecher-schwarz-ohne-frontbespannung-schraegansicht.jpg?v=1785850662"},{"product_id":"daliopticonlcrmk2oak","title":"DALI Opticon LCR MK2 On-Wall Speaker, Tobacco Oak (Each)","description":"\u003cp\u003eThe DALI Opticon LCR MK2 in Tobacco Oak is a flat on-wall speaker used as a left, right or centre channel.\u003c\/p\u003e\n\u003cp\u003eTobacco Oak is the warmest of the three finishes – a warm wood tone instead of technical black, making it the variant that blends into a living room with wooden furniture rather than dominating it. Technically it's identical: a 165 mm woofer\/midrange with wood fibre cone and SMC magnet system, topped by a hybrid tweeter module made of a 29 mm fabric dome and a 17 × 45 mm ribbon. Because this module can rotate, the same speaker works both upright and sideways.\u003c\/p\u003e\n\u003ch2\u003eWhy the Opticon LCR MK2?\u003c\/h2\u003e\n\u003cp\u003eBecause 128 millimetres of depth doesn't have to be a compromise on sound. DALI fits a 25 mm thick baffle plus additional internal bracing so the slim cabinet doesn't resonate. The bass reflex port works along the wall instead of against it – which keeps the bass defined even though there's hardly any volume to work with. And three identical LCRs across the front really do sound the same from left to right.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eAn open, airy sound with clearly drawn voices. The fabric dome carries the treble up to 14 kHz, above which the ribbon adds the fine overtones – it sounds like air, not sandpaper. The bass extension ends at 70 Hz and stays controlled while doing so. If you like films with punch, add a subwoofer; for music in the evening, you don't strictly need one.\u003c\/p\u003e\n\u003ch3\u003eWho is the Opticon LCR MK2 for?\u003c\/h3\u003e\n\u003cp\u003eBottom line: for living rooms where speakers should look good without getting in the way – and in Tobacco Oak, especially for rooms with wood and light surfaces. It's less suitable if you don't have a wall that can bear the weight, if deep bass without a subwoofer is a must, or if you want to place it freely on a sideboard – the wall is acoustically part of the concept here.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA speaker that ends the “soundbar or the real thing?” debate pretty quickly. Honestly: most living rooms would benefit more from this than from yet another tower in the corner. The trade press agreed: “With the new Opticon LCR MK2, Dali impressively shows that on-walls are a genuine alternative to soundbars and conventional speakers.” (lite-magazin.de, February 2022, top marks). At HD Zürisee in Wädenswil, we'll help you plan the right configuration to go with it.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e 2 + ½-way, bass reflex (port fires along the wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 70 – 30,000 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 89 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 109 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 30 – 150 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 1 × 165 mm (6½ in), wood fibre cone, SMC magnet system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e rotatable hybrid module – 29 mm fabric dome + 17 × 45 mm ribbon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 2,800 \/ 14,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle:\u003c\/strong\u003e 25 mm, additional internal bracing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e 2 gold-plated binding posts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 482 × 285 × 128 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Tobacco Oak (also available in the series: Black Ash, Satin White)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e single speaker, fabric front cover, rubber feet, instruction manual (wall-mounting hardware not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use the Opticon LCR MK2 as a pure stereo pair?\u003c\/h3\u003e\n\u003cp\u003eYes, two units make a fully-fledged stereo pair on the wall. You mount them upright to the left and right of the TV or sideboard at ear height. The tweeter module then stays in the vertical position. Only for the sideways-mounted centre channel do you rotate it by 90 degrees.\u003c\/p\u003e\n\u003ch3\u003eWhich amplifier suits the Opticon LCR MK2?\u003c\/h3\u003e\n\u003cp\u003eDALI recommends 30 to 150 watts at 4 ohms. More important than wattage figures is an amplifier that handles 4 ohms stably – most good integrated amplifiers and AV receivers do. At 89 dB sensitivity, it gets properly loud even with moderate power.\u003c\/p\u003e\n\u003ch3\u003eIs the Opticon LCR MK2 supplied singly or in pairs?\u003c\/h3\u003e\n\u003cp\u003eSingly, the price is per unit. That's standard and practical for LCR speakers: you buy exactly as many as your configuration needs – two for stereo, three for the cinema front, more for surround. We're happy to work this out with you.\u003c\/p\u003e\n\u003ch3\u003eHow is the speaker mounted on the wall?\u003c\/h3\u003e\n\u003cp\u003eVia the mounting points on the back, upright or sideways. Mounting hardware isn't included because it needs to match the wall: concrete, brick and plasterboard each call for something different. Eight kilograms per speaker is no picture frame – if in doubt, our technician Mauri takes care of the installation.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the DALI Opticon LCR MK2 in Tobacco Oak from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we've been setting up systems for over a quarter of a century and know how on-wall speakers behave in everyday use. As an authorised dealer, we advise you on the configuration, deliver and install on-site if you'd like. Reach us at +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFurther flat models are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eOn-Wall Speakers\u003c\/a\u003e, the foundation underneath under \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e. Power comes from the \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eIntegrated Amplifiers\u003c\/a\u003e, complete setups in \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003eHome Cinema\u003c\/a\u003e, and everything from \u003ca href=\"\/en-ch\/collections\/dali\"\u003eDALI\u003c\/a\u003e in the brand overview.\u003c\/p\u003e","brand":"DALI","offers":[{"title":"Default Title","offer_id":52989503799632,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dali-opticon-lcr-mk2-on-wall-lautsprecher-tabak-eiche-ohne-frontbespannung-schraegansicht.jpg?v=1785850691"},{"product_id":"daliopticonlcrmk2white","title":"DALI Opticon LCR MK2 On-Wall Speaker, White (Each)","description":"\u003cp\u003eThe DALI Opticon LCR MK2 in Satin White is a flat on-wall speaker for the left, right or centre channel.\u003c\/p\u003e\n\u003cp\u003eOn a light-coloured wall, the satin finish is the least conspicuous of the three – no gloss to throw reflections, and just 128 millimetres of depth. Behind the fabric cover sits a 165 mm woofer\/midrange with wood fibre cone and SMC magnet system, topped by the hybrid tweeter module made of a 29 mm fabric dome and a 17 × 45 mm ribbon. This module rotates by 90 degrees so the same speaker disperses correctly both upright and sideways.\u003c\/p\u003e\n\u003ch2\u003eWhy the Opticon LCR MK2?\u003c\/h2\u003e\n\u003cp\u003eBecause solving the space problem here doesn't come at the expense of sound. The baffle is 25 mm thick, plus additional internal bracing – the flat cabinet stays calm when things get loud. The bass reflex port channels airflow along the wall, not against it. And because all three front channels are the same speaker, voices in a film move cleanly from left to right instead of changing character along the way.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eClarity without harshness. The fabric dome covers the treble up to 14 kHz, the ribbon takes over above that – cymbals don't hiss, they shimmer. Voices come through direct and intelligible, which matters especially for series and films. Down low it reaches 70 Hz; for music that's among the better results in this form factor, for cinema effects a subwoofer joins in.\u003c\/p\u003e\n\u003ch3\u003eWho is the Opticon LCR MK2 for?\u003c\/h3\u003e\n\u003cp\u003eBottom line: for bright, tidy rooms where a speaker shouldn't be the first thing you see. Also for home cinemas with limited space in front of the screen. It's not the right choice if you expect deep bass without a subwoofer, if your wall can't bear the weight, or if it should stand freely in the room – the wall is part of the concept here, not incidental.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAnyone who thinks flat on-wall speakers are always half a compromise should make an exception for this one. It's a fully-fledged hi-fi speaker that just happens to also be slim. The trade press put it this way: “With the new Opticon LCR MK2, Dali impressively shows that on-walls are a genuine alternative to soundbars and conventional speakers.” (lite-magazin.de, February 2022, top marks). Which quantity and which electronics suit it best, we at HD Zürisee in Wädenswil will work out with you.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e 2 + ½-way, bass reflex (port fires along the wall)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 70 – 30,000 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 89 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 109 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 30 – 150 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 1 × 165 mm (6½ in), wood fibre cone, SMC magnet system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTweeter:\u003c\/strong\u003e rotatable hybrid module – 29 mm fabric dome + 17 × 45 mm ribbon\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 2,800 \/ 14,000 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle:\u003c\/strong\u003e 25 mm, additional internal bracing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e 2 gold-plated binding posts\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 482 × 285 × 128 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.0 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin White (also available in the series: Black Ash, Tobacco Oak)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e single speaker, fabric front cover, rubber feet, instruction manual (wall-mounting hardware not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many Opticon LCR MK2 do I need?\u003c\/h3\u003e\n\u003cp\u003eThat depends on your setup: two for stereo, three for a continuous cinema front of left, centre and right, five for a full surround setup. It's sold per unit, so you set the quantity freely. We're happy to work through the configuration with you.\u003c\/p\u003e\n\u003ch3\u003eCan you tell the speaker is this flat just by listening?\u003c\/h3\u003e\n\u003cp\u003eLess than you'd expect. The 25 mm thick baffle and internal bracing keep the cabinet calm, and the port uses the wall surface instead of working against it. What's missing is the last bit of deep bass below 70 Hz – that's exactly what subwoofers are for.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit next to a wall-mounted TV?\u003c\/h3\u003e\n\u003cp\u003eYes, that's its standard use case. Upright to the left and right of the screen for L and R, sideways below or above the TV for the centre channel – for the centre you rotate the tweeter module by 90 degrees. At 128 millimetres, it barely adds any depth.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the three finishes?\u003c\/h3\u003e\n\u003cp\u003eOnly the surface. Satin White, Black Ash and Tobacco Oak share the same technology, the same dimensions and the same 8 kilogram weight. So you choose purely based on your interior. The included fabric cover is colour-matched to each finish.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the DALI Opticon LCR MK2 in White from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you what works on your wall and what doesn't – mounting height, distance, cabling, the right amplifier. As an authorised dealer, we deliver and install on-site if you'd like, service included. Get in touch at +41 44 680 22 00, via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eOn-Wall Speakers\u003c\/a\u003e, the foundation under \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e. The power comes from the \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eIntegrated Amplifiers\u003c\/a\u003e, complete setups are in \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003eHome Cinema\u003c\/a\u003e, the whole range in the \u003ca href=\"\/en-ch\/collections\/dali\"\u003eDALI\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"DALI","offers":[{"title":"Default Title","offer_id":52989503832400,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dali-opticon-lcr-mk2-on-wall-lautsprecher-weiss-ohne-frontbespannung-schraegansicht.png?v=1785850730"},{"product_id":"focalariasr900black","title":"Focal Aria SR900 Surround Speaker, Black (Each)","description":"\u003cp\u003eThe Focal Aria SR900 is a bipolar 2-way surround speaker from the French Aria series for wall mounting in the home cinema. Supplied as a single speaker.\u003c\/p\u003e\n\u003cp\u003eTwo 13 cm Flax drivers and two inverted aluminum\/magnesium TNF tweeters radiate sound in a wide pattern – creating the enveloping sound field that surround channels need. At just 17 cm deep, it barely protrudes from the wall.\u003c\/p\u003e\n\u003ch2\u003eWhy the Focal Aria SR900?\u003c\/h2\u003e\n\u003cp\u003eBecause surround channels aren't meant to pinpoint a location, but to envelop you. The bipolar arrangement spreads sound around the room in a controlled way instead of bundling it at one point. The Flax cone made from French flax keeps the tonal color close to the other Aria models, and the waveguide on the tweeters keeps the highs precise. The included Polyfix wall bracket makes mounting straightforward.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA wide, diffuse surround field that envelops you: rain, wind, or applause really do seem to come from behind and from the side, without any single box pushing itself into the foreground.\u003c\/p\u003e\n\u003ch3\u003eWho is the SR900 for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the SR900 is a surround specialist and needs the wall behind it as a reflecting surface. Used as a main stereo speaker, it underperforms – that's what front speakers are for. And with a minimum impedance of 3.6 Ω, it wants an amplifier with reserves, not a cheap unit.\u003c\/p\u003e\n\u003ch3\u003eDo I need two?\u003c\/h3\u003e\n\u003cp\u003eFor a classic 5.1 system, yes – one per surround channel. The SR900 is supplied individually, so you order the quantity that matches your setup.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA discreet, tonally well-integrated surround speaker for Aria home cinemas. At HD Zürisee in Wädenswil we plan placement and levels and match the surrounds to your front.\u003c\/p\u003e\n\u003ch2\u003eTechnical data – Focal Aria SR900\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way bipolar surround speaker (single speaker)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-woofers:\u003c\/strong\u003e 2× 13 cm Flax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeters:\u003c\/strong\u003e 2× 25 mm Al\/Mg TNF inverted dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 85 Hz – 28 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-frequency point:\u003c\/strong\u003e 67 Hz (-6 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 8 Ω (minimum 3.6 Ω)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 25 – 120 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 29.5 × 40 × 17 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.6 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e SR900 single speaker, Polyfix wall bracket, magnetic front grille, fitted spikes + spare spikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the SR900 match the Aria EVO X series?\u003c\/h3\u003e\n\u003cp\u003eYes. It uses the same Flax technology and is the matching surround companion to an Aria EVO X front, center, and a SUB 1000F for a cohesive 5.1 system.\u003c\/p\u003e\n\u003ch3\u003eHow high should I mount the SR900?\u003c\/h3\u003e\n\u003cp\u003eA height of around 60 cm above ear level on the side or rear wall works well. That creates an enveloping field that's neither too direct nor too diffuse.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Focal Aria SR900 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause surround sound lives and dies with placement and calibration. We plan the setup with you, match the surrounds to your front, and set up the home cinema with our own technician on request.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecenter speaker\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for the foundation, and more for the \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003ehome cinema\u003c\/a\u003e.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":52989506683216,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/focal-aria-sr900-surround-lautsprecher-schwarz-schraegansicht.jpg?v=1785900954"},{"product_id":"sonoxx55bl","title":"Sonox X55 Universal Speaker, Black (Each)","description":"\u003cp\u003eThe Sonox X55 is a slim, versatile 2-way sound column that works close to a wall, on a low sideboard, or as a centre-channel speaker in a home cinema setup.\u003c\/p\u003e\n\u003cp\u003eFrom the Swiss Sonox\/ROWEN workshop – a speaker that adapts to your setup, not the other way round. It's sold individually, per unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Sonox X55?\u003c\/h2\u003e\n\u003cp\u003eAn 18mm ROWEN fabric dome, a 13 cm woofer\/midrange driver and a separate subwoofer produce a surprisingly wide soundstage with clear voices and powerful bass for this format. The sealed Acoustic Suspension enclosure works without a bass-reflex port – so placement is uncomplicated: directly against the wall, in a corner, or in front of a window front, without the sound suffering. With the included stand, it sits neatly on a low sideboard – and in a home cinema it cuts an equally good figure as a centre-channel speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eClean, well-organised sound with natural timbre and bass down to 45 Hz that's surprising for such a slim format. Whether as a stereo pair for music or as a centre channel for intelligible movie dialogue, the X55 stays clean and unobtrusive.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Sonox X55 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with limited space, for placement close to a wall, and for home cinema setups that need a slim centre channel. Handy detail: you buy it individually – one unit as a centre channel, or two for a stereo pair. Straight talk: the X55 is passive and needs an amplifier or AV receiver. It doesn't replace the deep bass of a large floorstanding column – but it's considerably more flexible.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe all-rounder of the Sonox line: slim, flexible and versatile, from stereo pair to home cinema centre channel. A lot of use cases for very little floor space.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the press says\u003c\/h3\u003e\n\u003cp\u003e\"… the author was surprised by the enormous power the X55 alone unleashed.\" And honest about its limits: \"Of course the very last deep-bass octave was missing, but given the slim dimensions, double basses already growled with real substance.\" – \u003cem\u003eAUDIO SWISS\u003c\/em\u003e, Q2\/2025\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Versatile 2-way speaker (passive) for wall, low sideboard, or as a centre channel – sealed enclosure\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 18 × 55 × 12 cm\u003c\/li\u003e\n\u003cli\u003eDrivers: 18 mm ROWEN fabric dome, 13 cm woofer\/midrange, 1 subwoofer\u003c\/li\u003e\n\u003cli\u003eSubwoofer principle: sealed Acoustic Suspension system (no bass reflex)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 45 Hz – 24,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 6 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89 dB\u003c\/li\u003e\n\u003cli\u003eCrossover frequencies: 250 Hz \/ 4,300 Hz\u003c\/li\u003e\n\u003cli\u003eMounting: Stand (vertical or centre), flat wall mounting (recesses), VESA 75 × 75 (bracket not included)\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminals for speaker cable\u003c\/li\u003e\n\u003cli\u003eSales unit: per piece\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eScope of delivery (per unit): 1 × Sonox X55, stand, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an amplifier for the Sonox X55?\u003c\/strong\u003e\u003cbr\u003eYes. The X55 is passive and needs an integrated amplifier, streaming amplifier, or AV receiver. As a front stereo speaker it runs on any typical amplifier; as a centre channel, on the centre channel of your AV receiver. We're happy to work out the right solution with you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the X55 as a centre-channel speaker?\u003c\/strong\u003e\u003cbr\u003eYes, that's exactly what it's designed for too. Its slim format and good speech intelligibility make it a practical centre channel for home cinema – as long as your other speakers match it sonically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the X55 sold individually or as a pair?\u003c\/strong\u003e\u003cbr\u003eIndividually, per unit. That way you buy exactly what you need: one unit as a centre channel, or two units for a classic stereo pair. If you have questions about quantity, we're happy to advise you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonox X55 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we can tell you from experience whether the X55 fits best into your setup as a stereo pair or a centre channel. In Wädenswil, we put together a coherent system of speakers, amplifier and cable for you – call or write to us.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eEverything for \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema\u003c\/a\u003e, the right amplifier under \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eIntegrated amplifiers\u003c\/a\u003e or \u003ca href=\"\/en-ch\/collections\/streaming-verstarker\"\u003eStreaming amplifiers\u003c\/a\u003e, and the right cable at \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables \u0026amp; connectors\u003c\/a\u003e. More from the same Swiss workshop is available at \u003ca href=\"\/en-ch\/collections\/rowen\"\u003eROWEN\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonox","offers":[{"title":"Default Title","offer_id":52989567795536,"sku":null,"price":700.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonox-x55-universal-lautsprecher-schwarz-frontansicht.jpg?v=1786721305"},{"product_id":"sonoxx55gr","title":"Sonox X55 Universal Speaker, Light Grey (Each)","description":"\u003cp\u003eThe Sonox X55 is a slim, versatile 2-way sound column that works close to a wall, on a low sideboard, or as a centre-channel speaker in a home cinema setup.\u003c\/p\u003e\n\u003cp\u003eFrom the Swiss Sonox\/ROWEN workshop – a speaker that adapts to your setup, not the other way round. It's sold individually, per unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Sonox X55?\u003c\/h2\u003e\n\u003cp\u003eAn 18mm ROWEN fabric dome, a 13 cm woofer\/midrange driver and a separate subwoofer produce a surprisingly wide soundstage with clear voices and powerful bass for this format. The sealed Acoustic Suspension enclosure works without a bass-reflex port – so placement is uncomplicated: directly against the wall, in a corner, or in front of a window front, without the sound suffering. With the included stand, it sits neatly on a low sideboard – and in a home cinema it cuts an equally good figure as a centre-channel speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eClean, well-organised sound with natural timbre and bass down to 45 Hz that's surprising for such a slim format. Whether as a stereo pair for music or as a centre channel for intelligible movie dialogue, the X55 stays clean and unobtrusive. The light grey blends discreetly into modern living rooms.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Sonox X55 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with limited space, for placement close to a wall, and for home cinema setups that need a slim centre channel. Handy detail: you buy it individually – one unit as a centre channel, or two for a stereo pair. Straight talk: the X55 is passive and needs an amplifier or AV receiver. It doesn't replace the deep bass of a large floorstanding column – but it's considerably more flexible.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe all-rounder of the Sonox line: slim, flexible and versatile, from stereo pair to home cinema centre channel. A lot of use cases for very little floor space.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the press says\u003c\/h3\u003e\n\u003cp\u003e\"… the author was surprised by the enormous power the X55 alone unleashed.\" And honest about its limits: \"Of course the very last deep-bass octave was missing, but given the slim dimensions, double basses already growled with real substance.\" – \u003cem\u003eAUDIO SWISS\u003c\/em\u003e, Q2\/2025\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Versatile 2-way speaker (passive) for wall, low sideboard, or as a centre channel – sealed enclosure\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 18 × 55 × 12 cm\u003c\/li\u003e\n\u003cli\u003eDrivers: 18 mm ROWEN fabric dome, 13 cm woofer\/midrange, 1 subwoofer\u003c\/li\u003e\n\u003cli\u003eSubwoofer principle: sealed Acoustic Suspension system (no bass reflex)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 45 Hz – 24,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 6 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89 dB\u003c\/li\u003e\n\u003cli\u003eCrossover frequencies: 250 Hz \/ 4,300 Hz\u003c\/li\u003e\n\u003cli\u003eMounting: Stand (vertical or centre), flat wall mounting (recesses), VESA 75 × 75 (bracket not included)\u003c\/li\u003e\n\u003cli\u003eConnection: Screw terminals for speaker cable\u003c\/li\u003e\n\u003cli\u003eSales unit: per piece\u003c\/li\u003e\n\u003cli\u003eColour: Light Grey\u003c\/li\u003e\n\u003cli\u003eScope of delivery (per unit): 1 × Sonox X55, stand, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an amplifier for the Sonox X55?\u003c\/strong\u003e\u003cbr\u003eYes. The X55 is passive and needs an integrated amplifier, streaming amplifier, or AV receiver. As a front stereo speaker it runs on any typical amplifier; as a centre channel, on the centre channel of your AV receiver. We're happy to work out the right solution with you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the X55 as a centre-channel speaker?\u003c\/strong\u003e\u003cbr\u003eYes, that's exactly what it's designed for too. Its slim format and good speech intelligibility make it a practical centre channel for home cinema – as long as your other speakers match it sonically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the X55 sold individually or as a pair?\u003c\/strong\u003e\u003cbr\u003eIndividually, per unit. That way you buy exactly what you need: one unit as a centre channel, or two units for a classic stereo pair. If you have questions about quantity, we're happy to advise you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonox X55 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we can tell you from experience whether the X55 fits best into your setup as a stereo pair or a centre channel. In Wädenswil, we put together a coherent system of speakers, amplifier and cable for you – call or write to us.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eEverything for \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema\u003c\/a\u003e, the right amplifier under \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eIntegrated amplifiers\u003c\/a\u003e or \u003ca href=\"\/en-ch\/collections\/streaming-verstarker\"\u003eStreaming amplifiers\u003c\/a\u003e, and the right cable at \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables \u0026amp; connectors\u003c\/a\u003e. More from the same Swiss workshop is available at \u003ca href=\"\/en-ch\/collections\/rowen\"\u003eROWEN\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonox","offers":[{"title":"Default Title","offer_id":52989567828304,"sku":null,"price":700.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonox-x55-universal-lautsprecher-hellgrau-frontansicht.jpg?v=1786721384"},{"product_id":"cantonvento11bl","title":"Canton Vento 11 On-Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton Vento 11 is the flat on-wall speaker of the new Vento series 2026 in high-gloss black – a sealed 2-way speaker only 9 cm deep, designed to sit close to the wall.\u003c\/p\u003e\n\u003cp\u003eOn the narrow baffle sits the new 25 mm BC tweeter with the square \"Transmission Front Plate\", and below it a 154 mm mid-woofer made of Aluminium Titanium Black. Instead of a bass-reflex port, the 11 works in a sealed enclosure — that keeps the bass dry and controlled and removes much of the trickiness of mounting close to a wall. Hand-built in Weilrod and delivered as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Vento 11?\u003c\/h2\u003e\n\u003cp\u003eBecause not every speaker needs to stand in the room — some belong on the wall. The Vento 11 is the series' flat speaker: 9 cm deep, sealed enclosure, the same Reference tweeter technology as the larger models. As a surround or rear speaker in a Vento home cinema it blends in seamlessly, and wherever a bulky floorstander would get in the way, it plays to its strength. Honestly — on a narrow wall, a 9 cm flat box simply looks tidier than a block on stands.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system in sealed design (no bass-reflex port)\u003c\/li\u003e\n\u003cli\u003e1× 154 mm mid-woofer (Aluminium Titanium Black)\u003c\/li\u003e\n\u003cli\u003e25 mm BC tweeter with Transmission Front Plate (Reference technology)\u003c\/li\u003e\n\u003cli\u003e40–40,000 Hz, efficiency 84.1 dB\u003c\/li\u003e\n\u003cli\u003ePower handling 60 \/ 100 W, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eFlat design, only 9 cm deep — for close-to-wall mounting\u003c\/li\u003e\n\u003cli\u003eMagnetic fabric cover, hand-built in Germany\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton Vento 11 for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the Vento 11 is a flat on-wall speaker — for wall mounting, as a surround box in a Vento home cinema, or for rooms where a floorstander simply won't fit. It's not intended as the sole front for big stereo bass — for that you'd choose the Vento 21, 31, or a floorstander. But in its role — clean, precise sound from a shallow cabinet, right on the wall — hardly any other speaker of this shape can match it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Vento 11 solves a space problem without making sonic excuses: sealed enclosure, Reference tweeter, 9 cm flat. In a Vento set it's the logical surround or wall solution, and on its own the elegant answer to \"a floorstander won't fit here.\" At HD Zürisee in Wädenswil we'll tell you honestly whether the 11 suits your setup or whether a bookshelf speaker is the better choice for your room — and plan the matching Vento home cinema right along with it.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton Vento 11\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e On-wall speaker (Vento series 2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, sealed design (acoustic suspension)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm Aluminium Titanium Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm BC dome with Transmission Front Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 40–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 84.1 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Single-wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 20 × 36 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.77 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair of Vento 11 in high-gloss black, magnetic fabric covers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Vento 11 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price covers two on-wall speakers – a complete pair. So you only need to order once for a stereo pair or two surround speakers.\u003c\/p\u003e\n\u003ch3\u003eCan the Vento 11 be mounted close to the wall?\u003c\/h3\u003e\n\u003cp\u003eYes, that's exactly what it's built for. At just 9 cm deep with a sealed enclosure, it tolerates close-to-wall placement much better than a speaker with a rear bass-reflex port — the bass stays clean instead of booming.\u003c\/p\u003e\n\u003ch3\u003eIs the Vento 11 suited for home cinema?\u003c\/h3\u003e\n\u003cp\u003eVery well suited. As a surround or rear speaker in a Vento setup it matches tonally seamlessly with the series' floorstanders and compacts. For the front in larger rooms, floorstanders or the Vento 31 are the better choice.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the Vento 11 and the Vento 21?\u003c\/h3\u003e\n\u003cp\u003eThe 11 is the flat on-wall speaker with a sealed enclosure, designed for wall mounting and surround use. The 21 is a compact bookshelf speaker with bass reflex for free-standing placement. Which one fits depends on whether the speaker goes on the wall or on a shelf.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Vento 11 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an on-wall speaker is usually part of a bigger concept – that's where our advice helps. We plan your Vento home cinema from the center speaker to the subwoofer, deliver your pair, and tell you honestly where the flat 11 is the right solution and where it isn't.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003eVento speakers\u003c\/a\u003e for a complete set, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for deep bass, or a matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e as the drive.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53131732484432,"sku":null,"price":1300.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-vento-11-wandlautsprecher-schwarz-schraegansicht.png?v=1785869620"},{"product_id":"cantonvento11wh","title":"Canton Vento 11 On-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton Vento 11 is the flat on-wall speaker of the new Vento series 2026 in matte white – a sealed 2-way speaker only 9 cm deep, designed to sit close to the wall.\u003c\/p\u003e\n\u003cp\u003eOn the narrow baffle sits the new 25 mm BC tweeter with the square \"Transmission Front Plate\", and below it a 154 mm mid-woofer made of Aluminium Titanium Black. Instead of a bass-reflex port, the 11 works in a sealed enclosure — that keeps the bass dry and controlled and removes much of the trickiness of mounting close to a wall. Hand-built in Weilrod and delivered as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Vento 11?\u003c\/h2\u003e\n\u003cp\u003eBecause not every speaker needs to stand in the room — some belong on the wall. The Vento 11 is the series' flat speaker: 9 cm deep, sealed enclosure, the same Reference tweeter technology as the larger models. As a surround or rear speaker in a Vento home cinema it blends in seamlessly, and wherever a bulky floorstander would get in the way, it plays to its strength. Honestly — on a narrow wall, a 9 cm flat box simply looks tidier than a block on stands.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system in sealed design (no bass-reflex port)\u003c\/li\u003e\n\u003cli\u003e1× 154 mm mid-woofer (Aluminium Titanium Black)\u003c\/li\u003e\n\u003cli\u003e25 mm BC tweeter with Transmission Front Plate (Reference technology)\u003c\/li\u003e\n\u003cli\u003e40–40,000 Hz, efficiency 84.1 dB\u003c\/li\u003e\n\u003cli\u003ePower handling 60 \/ 100 W, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eFlat design, only 9 cm deep — for close-to-wall mounting\u003c\/li\u003e\n\u003cli\u003eMagnetic fabric cover, hand-built in Germany\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton Vento 11 for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: the Vento 11 is a flat on-wall speaker — for wall mounting, as a surround box in a Vento home cinema, or for rooms where a floorstander simply won't fit. It's not intended as the sole front for big stereo bass — for that you'd choose the Vento 21, 31, or a floorstander. But in its role — clean, precise sound from a shallow cabinet, right on the wall — hardly any other speaker of this shape can match it.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Vento 11 solves a space problem without making sonic excuses: sealed enclosure, Reference tweeter, 9 cm flat. In a Vento set it's the logical surround or wall solution, and on its own the elegant answer to \"a floorstander won't fit here.\" At HD Zürisee in Wädenswil we'll tell you honestly whether the 11 suits your setup or whether a bookshelf speaker is the better choice for your room — and plan the matching Vento home cinema right along with it.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton Vento 11\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e On-wall speaker (Vento series 2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, sealed design (acoustic suspension)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm Aluminium Titanium Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm BC dome with Transmission Front Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 40–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 84.1 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Single-wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 20 × 36 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.77 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Pair of Vento 11 in matte white, magnetic fabric covers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Vento 11 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price covers two on-wall speakers – a complete pair. So you only need to order once for a stereo pair or two surround speakers.\u003c\/p\u003e\n\u003ch3\u003eCan the Vento 11 be mounted close to the wall?\u003c\/h3\u003e\n\u003cp\u003eYes, that's exactly what it's built for. At just 9 cm deep with a sealed enclosure, it tolerates close-to-wall placement much better than a speaker with a rear bass-reflex port — the bass stays clean instead of booming.\u003c\/p\u003e\n\u003ch3\u003eIs the Vento 11 suited for home cinema?\u003c\/h3\u003e\n\u003cp\u003eVery well suited. As a surround or rear speaker in a Vento setup it matches tonally seamlessly with the series' floorstanders and compacts. For the front in larger rooms, floorstanders or the Vento 31 are the better choice.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the Vento 11 and the Vento 21?\u003c\/h3\u003e\n\u003cp\u003eThe 11 is the flat on-wall speaker with a sealed enclosure, designed for wall mounting and surround use. The 21 is a compact bookshelf speaker with bass reflex for free-standing placement. Which one fits depends on whether the speaker goes on the wall or on a shelf.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Vento 11 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an on-wall speaker is usually part of a bigger concept – that's where our advice helps. We plan your Vento home cinema from the center speaker to the subwoofer, deliver your pair, and tell you honestly where the flat 11 is the right solution and where it isn't.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003eVento speakers\u003c\/a\u003e for a complete set, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e for deep bass, or a matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e as the drive.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53131732517200,"sku":null,"price":1300.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-vento-11-wandlautsprecher-weiss-schraegansicht.png?v=1785869736"},{"product_id":"cantonventoar1bl","title":"Canton Vento AR 1 Atmos Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton Vento AR 1 is an upward-firing Dolby Atmos speaker from the Vento series 2026 that creates the height layer via ceiling reflection instead of in-ceiling speakers.\u003c\/p\u003e\n\u003cp\u003eIn high-gloss black, it's the matching add-on module for the series' black floorstanders and bookshelf speakers. Inside the sealed enclosure work a 25 mm Black Ceramic dome behind the Transmission Front Plate and a 154 mm mid-woofer with an ATB cone. You place the AR 1 on top of a Vento speaker or hang it on the wall using the integrated wall mount.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Vento AR 1?\u003c\/h2\u003e\n\u003cp\u003eBecause the height layer is the difference between good surround and true 3D sound, and not everyone wants to open up their ceiling for it. The AR 1 fires upward at an angle, the ceiling bounces the sound back to your listening position, and the layer above you is done. No core drilling, no cables in the concrete ceiling, no conversation with your landlady. Tonally it stays in the family, because it runs the same tweeter as the rest of the Vento models.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eRain coming from above, helicopters passing over the room, and above all a ceiling that suddenly no longer feels like a lid. The sealed enclosure gives a dry, controlled attack, which matters more for effects than deep bass. From 50 Hz upward, the AR 1 covers exactly the range that Atmos objects need, the rest stays with the front, center, and subwoofer.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Vento AR 1 for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: for home cinemas with an Atmos-capable AV receiver or AV pre-amp, free height channels, and as flat and hard a ceiling as possible. With very high, sloped, open, or heavily damped ceilings, the reflection effect fizzles out, and in-ceiling speakers are the more honest solution. And without an Atmos decoder in the electronics, the module simply stays silent. These are exactly the points we'd rather clarify beforehand than after.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe AR 1 is the pragmatic way up: cleanly built, tonally matched to the series, and set up in two minutes. It doesn't replace a genuine ceiling installation in a purpose-built cinema room, but in a normal living room it delivers most of the effect for a fraction of the effort. HD Zürisee plans your whole setup in Wädenswil, from the channel count to the receiver to whether your ceiling will even play along.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dolby Atmos height speaker, add-on and wall module, passive (Vento series 2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, sealed enclosure, upward-firing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm ATB (Aluminium Titanium Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm BC dome (Black Ceramic) with Transmission Front Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50–30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 84.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Single-wiring, gold-plated terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Add-on on top of a floorstanding or bookshelf speaker, or wall mounting via integrated wall bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDolby Atmos licensed:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e High-gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 19.5 × 27 × 14.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2× Vento AR 1 in high-gloss black, equipment feet, magnetic fabric covers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many Vento AR 1 do I need for an Atmos setup?\u003c\/h3\u003e\n\u003cp\u003eThis listing includes two speakers, covering one height-channel pair, i.e. a configuration ending in 2, such as 5.1.2 or 7.1.2. For four height channels, i.e. 5.1.4 or 7.1.4, you need two pairs, positioned front and rear.\u003c\/p\u003e\n\u003ch3\u003eHow does an upward-firing Atmos speaker work?\u003c\/h3\u003e\n\u003cp\u003eIt fires upward at an angle toward the ceiling, which bounces the sound back down to your seat. Your hearing locates the source where the reflection comes from, i.e. above you. This requires a sufficiently flat, smooth, acoustically hard ceiling, roughly 2.3 to 3.5 meters high.\u003c\/p\u003e\n\u003ch3\u003eDo I need a specific amplifier for the Vento AR 1?\u003c\/h3\u003e\n\u003cp\u003eYou need an AV receiver or AV pre-amp with a Dolby Atmos decoder and at least two free height channels. The AR 1 is a passive speaker with no built-in amplifier. On a classic stereo amplifier you can't drive the height layer at all, since the decoding is missing there.\u003c\/p\u003e\n\u003ch3\u003eCan I also hang the AR 1 on the wall?\u003c\/h3\u003e\n\u003cp\u003eYes. The enclosure has an integrated wall mount, so it can also run as an on-wall speaker. That said, the classic use remains as an add-on on top of a front or rear speaker, since the dispersion is designed exactly for that. We're happy to help with positioning.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Vento AR 1 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an Atmos setup lives or dies by planning: channel count, ceiling height, receiver, calibration. We've been building these systems for many years, we'll tell you honestly if add-on modules would be the wrong choice for your room, and on request we handle delivery, installation, and on-site calibration.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e more modules for the height layer under \u003ca href=\"\/en-ch\/collections\/dolby-atmos-lautsprecher\"\u003eDolby Atmos speakers\u003c\/a\u003e, the matching front, center, and rear models under \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e. A \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e provides the foundation, and the full brand range is in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53131971789136,"sku":null,"price":1200.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-vento-ar-1-atmos-lautsprecher-schwarz-schraegansicht.png?v=1785869737"},{"product_id":"cantonventoar1wh","title":"Canton Vento AR 1 Atmos Speaker, White (Pair)","description":"\u003cp\u003eThe Canton Vento AR 1 is a passive Dolby Atmos height module from the Vento series 2026, run as an add-on on top of a speaker or on the wall, that creates the height layer via the ceiling.\u003c\/p\u003e\n\u003cp\u003eSilky matte white is the variant for bright rooms, where a black block on top of the front speaker stands out more than the effect it produces. Inside the sealed enclosure sit a 25 mm Black Ceramic tweeter behind the Transmission Front Plate and a 154 mm mid-woofer with an ATB cone. A wall mount is integrated, and equipment feet and magnetic fabric covers are included.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton Vento AR 1?\u003c\/h2\u003e\n\u003cp\u003eBecause without height channels, Dolby Atmos is just a logo on the remote. The AR 1 delivers this layer without any structural work: set it up, connect it, calibrate it. It uses the same tweeter technology as the rest of the Vento models, so tonally the height layer doesn't stand out. And in white, it almost disappears against a bright wall, which in living rooms typically saves half the discussion.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA layer above the actual soundstage that you mainly notice when it's missing. Rain, aircraft, reverb tails, and atmospheres detach from the front speakers and hang above you in the room. Because the enclosure is sealed, the attack stays dry and precise rather than mushy. Music in Atmos mixes also gains noticeably in air and height.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Canton Vento AR 1 for?\u003c\/h3\u003e\n\u003cp\u003ePlain talk: for anyone with an Atmos-capable AV receiver or AV pre-amp, free height channels, and a flat, smooth ceiling at normal living-room height. This solution doesn't suit sloped ceilings, open galleries, very high ceilings, or large suspended acoustic ceilings, since the reflection doesn't come back cleanly there. In such rooms we recommend in-ceiling speakers, even though that means more work.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small module with a big effect, provided the room plays along. If you already run Vento speakers, this extends your set without any break in tonal character, and the effort is limited to two cables and a calibration run. Talk to us first: the team at HD Zürisee in Wädenswil looks at ceiling height, seating position, and receiver, and tells you whether two or four height channels are the right answer.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dolby Atmos height speaker, add-on and wall module, passive (Vento series 2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, sealed enclosure, upward-firing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-woofer:\u003c\/strong\u003e 1× 154 mm ATB (Aluminium Titanium Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1× 25 mm BC dome (Black Ceramic) with Transmission Front Plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50–30,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 84.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Single-wiring, gold-plated terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Add-on on top of a floorstanding or bookshelf speaker, or wall mounting via integrated wall bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDolby Atmos licensed:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silky matte white\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 19.5 × 27 × 14.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 kg each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2× Vento AR 1 in silky matte white, equipment feet, magnetic fabric covers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Vento AR 1 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, this listing includes two height speakers in silky matte white. That covers two Atmos height channels, as required by a 5.1.2 or 7.1.2 configuration. Equipment feet, magnetic fabric covers, and the instruction manual come with both speakers.\u003c\/p\u003e\n\u003ch3\u003eWhat's better, add-on modules or in-ceiling speakers?\u003c\/h3\u003e\n\u003cp\u003eThat depends on your ceiling. Add-on modules like the AR 1 need no construction work and work very well with flat, acoustically hard ceilings. In-ceiling speakers are more precise and independent of the ceiling's surface, but require drilling and cable runs. We'll help you work out what fits your room.\u003c\/p\u003e\n\u003ch3\u003eHow high can the ceiling be for the AR 1?\u003c\/h3\u003e\n\u003cp\u003eDolby recommends ceiling heights of roughly 2.3 to 3.5 meters for upward-firing speakers. Below that, the reflection becomes too direct; above it, too weak and diffuse. It's also important to have a smooth, undamped surface above the speakers, so no acoustic panels in that spot.\u003c\/p\u003e\n\u003ch3\u003eDoes the AR 1 also fit speakers from other series?\u003c\/h3\u003e\n\u003cp\u003eBasically yes, as long as the floorstander has a flat, sufficiently large top surface. The included equipment feet decouple the module from it. Visually and tonally, the combination stays most coherent within the Vento series, since the tweeter and finishes are identical there.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Vento AR 1 in white at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just deliver, we plan the system. Our technician Mauri mounts, wires, and calibrates your home cinema on-site on request, and we'll tell you beforehand whether two height channels are enough or four make sense. Call us, write to us, or use WhatsApp.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGoes well with:\u003c\/strong\u003e the other solutions for the height layer under \u003ca href=\"\/en-ch\/collections\/dolby-atmos-lautsprecher\"\u003eDolby Atmos speakers\u003c\/a\u003e, alternatives for tricky ceilings under \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003ein-ceiling speakers\u003c\/a\u003e. You'll find front, center, and rear models under \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e, and the necessary foundation under \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53131971821904,"sku":null,"price":1200.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-vento-ar-1-atmos-lautsprecher-weiss-schraegansicht.png?v=1785869859"},{"product_id":"canton-inwall-989-einbaulautsprecher-weiss","title":"Canton InWall 989 In-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton InWall 989 is a passive two-way in-wall speaker for wall and ceiling installation that forms the flagship model of the InWall series, with a 21 cm ceramic woofer and a pivoting ceramic tweeter.\u003c\/p\u003e\n\u003cp\u003eIt works on the Free Air principle: no enclosure of its own, just the volume behind the wall as its resonance space. The metal grille holds magnetically, comes off for painting, and afterward all but disappears – the most elegant way to get rid of a large cabinet without giving it up.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the InWall 989?\u003c\/h2\u003e\n\u003cp\u003eBecause there are living rooms where no floorstanding speaker is allowed to stand – but the sound still shouldn't shrink down to background music. With 21 cm of cone area, 160 watts of music power handling and 88.5 dB sensitivity, the 989 has the reserves the smaller InWall models lack. The ceramic tweeter can be pivoted toward the listening zone, and its level adjusted as well. That lets you correct for an installation spot dictated by the architecture rather than the acoustics.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eFull-fledged stereo sound with substance. The large ceramic woofer goes down to 42 Hz and delivers body rather than just a suggestion of it, while the treble stays open up to 40 kHz without becoming harsh. In a properly built wall, the 989 sounds stable and mature – a serious system, not mere sound reinforcement.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the InWall 989 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor living spaces where the system needs to stay invisible without you paying for it in sound quality. It also cuts a good figure as an invisible home cinema front. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e an in-wall speaker is only ever as good as its installation. In thin, undamped drywall the wall itself resonates along with it; in a solid, damped construction the same speaker plays a class higher. For brief background sound in a guest room it's simply too much – the smaller models in the series suffice there.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe flagship of the InWall series, and the right choice when invisible isn't supposed to mean quiet. Honestly: the speaker is the easy part, the real work lies in the installation location. That's exactly where we at HD Zürisee in Wädenswil start, before anyone unpacks the jigsaw. Call us, write to us, or reach out on WhatsApp – tell us about your room and your wall construction.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: wall \u0026amp; ceiling in-wall speaker, 2-way Free Air, passive\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 210 mm ceramic woofer\/midrange, 1× 25 mm ceramic tweeter (pivoting)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 42–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 2,900 Hz\u003c\/li\u003e\n\u003cli\u003ePower handling: 90 W nominal \/ 160 W music power\u003c\/li\u003e\n\u003cli\u003eSensitivity: 88.5 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eImpedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003eTweeter level adjustment: switchable\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 263 × 367 × 103 mm\u003c\/li\u003e\n\u003cli\u003eCutout (W×H): 235 × 343 mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 96 mm\u003c\/li\u003e\n\u003cli\u003eMax. wall thickness: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 kg per unit (5.0 kg per pair)\u003c\/li\u003e\n\u003cli\u003eConnection: gold-plated screw terminals (Easy-Link terminal)\u003c\/li\u003e\n\u003cli\u003eFront grille: metal, magnetically held, paintable\u003c\/li\u003e\n\u003cli\u003eOptional accessory: ER 8 mounting frame for solid-wall installation\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2 in-wall speakers (pair), 2 removable magnetic grilles, mounting template\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big does the wall cutout for the InWall 989 need to be?\u003c\/h3\u003e\n\u003cp\u003eThe cutout measures 235 × 343 mm, the required installation depth is 96 mm, and the maximum wall thickness is 40 mm. The visible outer dimensions are 263 × 367 mm. Before cutting, be sure to locate studs, wiring and pipes – or have Mauri, our technician, measure the location on site.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 989 need a back box?\u003c\/h3\u003e\n\u003cp\u003eNo, it's not strictly necessary. The 989 works on the Free Air principle and fires into the wall volume without a cabinet of its own. A sealed back box or a damped cavity does help, though, if the neighbouring room needs to stay quiet or if the cavity turns out unusually large. We'll plan that with you.\u003c\/p\u003e\n\u003ch3\u003eCan the InWall 989 go in the bathroom?\u003c\/h3\u003e\n\u003cp\u003eIt's not built for permanently damp rooms. In a well-ventilated bathroom it works fine in practice, as long as it isn't installed directly in the splash zone. For wellness areas, saunas or outdoor use we recommend weatherproof models instead – just ask us and we'll suggest suitable alternatives.\u003c\/p\u003e\n\u003ch3\u003eCan I paint over the InWall 989's grille?\u003c\/h3\u003e\n\u003cp\u003eYes. The metal grille is held magnetically, can be removed, and painted in your wall colour. Afterward the speaker barely stands out visually. Paint the grille off the speaker and thinly, so the perforation stays open and the treble doesn't get muffled. Two thin coats are enough.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton InWall 989 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you before the first hole is drilled whether the installation spot works structurally and acoustically. Our experienced team plans placement, cabling and the rest of the system, and Mauri handles the installation on site. Call us or write to us – we'll listen first.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor depth below 42 Hz, add a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e; you'll find the drive electronics among the \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e and the connection among the \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e. More invisible models can be found among the \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003ein-wall speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, and the full range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53135606546768,"sku":null,"price":690.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-inwall-989-einbaulautsprecher-weiss-frontansicht.png?v=1785867319"},{"product_id":"canton-inwall-865-einbaulautsprecher-weiss","title":"Canton InWall 865 In-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton InWall 865 is a passive two-way in-wall speaker for wall and ceiling installation with a 16.5 cm aluminium woofer, a pivoting tweeter and switchable treble level adjustment.\u003c\/p\u003e\n\u003cp\u003eThese two adjustment options are exactly what make it the pragmatist of the series. Because the installation spot is rarely where the acoustics would want it – it's where the space, the joists and the framing allow it. The 865 doesn't hold that against you.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the InWall 865?\u003c\/h2\u003e\n\u003cp\u003eBecause you can adapt it to the room instead of the other way around. The tweeter pivots toward the listening zone, and its level adjusts in steps – that rescues installation spots where a fixed speaker would sound either shrill or dull. Add to that 120 watts of music power handling and 87.5 dB sensitivity: enough reserve so that even a normal-sized living room is not just filled with sound but properly carried.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA clear, well-focused sound image that can be aimed. Vocals stand cleanly, detail is preserved, and the 16.5 cm woofer delivers enough foundation from 45 Hz for everyday music. At the top end, the frequency response reaches up to 40 kHz – open, without becoming fatiguing.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the InWall 865 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor living, dining and work spaces where no cabinet is allowed to be visible, but sound quality still matters. It also sits right as an unobtrusive surround pair in a home cinema. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e it's no bass miracle – for cinema impact a subwoofer is needed, as with any in-wall speaker of this size. And if you want to make an entire living room front invisible, the larger InWall 989 is the more honest suggestion.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most flexible of the three InWall classics. It forgives installation spots where other speakers would take offence, while staying remarkably coherent. Straight talk to close: half the battle is the installation – wall construction, cutout and damping decide more than the spec sheet. That's exactly why we at HD Zürisee in Wädenswil look at the installation spot before any drilling starts.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: wall \u0026amp; ceiling in-wall speaker, 2-way Free Air, passive\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 165 mm aluminium woofer\/midrange, 1× 25 mm aluminium tweeter (pivoting)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 2,900 Hz\u003c\/li\u003e\n\u003cli\u003ePower handling: 60 W nominal \/ 120 W music power\u003c\/li\u003e\n\u003cli\u003eSensitivity: 87.5 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eImpedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003eTreble level adjustment: switchable\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 236 × 330 × 92 mm\u003c\/li\u003e\n\u003cli\u003eCutout (W×H): 198 × 294 mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 85 mm\u003c\/li\u003e\n\u003cli\u003eMax. wall thickness: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg per unit (4 kg per pair)\u003c\/li\u003e\n\u003cli\u003eConnection: gold-plated screw terminals (Easy-Link terminal)\u003c\/li\u003e\n\u003cli\u003eFront grille: metal, magnetically held, paintable\u003c\/li\u003e\n\u003cli\u003eOptional accessory: ER 6 mounting frame for solid-wall installation\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2 in-wall speakers (pair), 2 magnetic grilles, mounting template\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big does the wall cutout for the InWall 865 need to be?\u003c\/h3\u003e\n\u003cp\u003eThe cutout measures 198 × 294 mm, the installation depth 85 mm, and the maximum wall thickness 40 mm. The visible outer dimensions are 236 × 330 mm. Before cutting, locate the studs, electrical and water lines – Mauri, our technician, does this as part of the site survey.\u003c\/p\u003e\n\u003ch3\u003eWhat does the pivoting tweeter do for you?\u003c\/h3\u003e\n\u003cp\u003eIt can be turned toward the listening position, so the treble reaches you where you sit – even if the installation spot ends up off to one side. You can also switch the treble level to compensate for a hard or heavily damped room acoustic. Two simple adjustments, a noticeable difference.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 865 fit in a solid wall?\u003c\/h3\u003e\n\u003cp\u003eYes, but not without preparation. In stud framing or a lining wall it sits directly in the cavity. In brick or concrete, a recessed niche or the optional ER 6 mounting frame is needed. Tell us how your wall is built, and we'll plan the installation.\u003c\/p\u003e\n\u003ch3\u003eIs the InWall 865 suitable for a kitchen or bathroom?\u003c\/h3\u003e\n\u003cp\u003eYes for the kitchen, only with limitations in the bathroom. The 865 isn't a certified moisture-resistant speaker, but it holds up in practice in a well-ventilated bathroom outside the splash zone. For wellness areas, saunas or outdoor installation, a moisture-resistant model is the better choice – we'll point you to suitable ones.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton InWall 865 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with in-wall speakers, advice comes before the purchase: wall construction, cutout, cable routing and amplifier choice all hang together. We at HD Zürisee in Wädenswil work that out with you, supply the matching rest of the system, and send Mauri for the installation. Get in touch by phone, email or WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFor cinema impact, add a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e; you'll find matching electronics among the \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e and the connection among the \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e. If you're planning an entire invisible front, take a look at the \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003ein-wall speakers\u003c\/a\u003e, the \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003ehome cinema\u003c\/a\u003e section.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53135606579536,"sku":null,"price":510.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-inwall-865-einbaulautsprecher-weiss-frontansicht.png?v=1785867093"},{"product_id":"canton-inwall-845-einbaulautsprecher-weiss","title":"Canton InWall 845 In-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton InWall 845 is a compact passive two-way in-wall speaker for wall and ceiling installation with a 13.5 cm aluminium woofer and a pivoting 25 mm aluminium tweeter.\u003c\/p\u003e\n\u003cp\u003eIt's the entry point into the InWall series and has the smallest cutout: 152 × 233 mm, 68 mm deep. That means it fits where larger models fail because of the stud spacing – and after the magnetic grille has been painted over, it practically disappears into the wall.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the InWall 845?\u003c\/h2\u003e\n\u003cp\u003eBecause not every zone needs a main system, but every zone deserves good sound. The 845 brings the same Free Air construction and the same pivoting aluminium tweeter as its bigger siblings, just in a smaller size. That makes it a sensible building block when you want to fill several rooms with invisible sound, without the wall cutouts turning into a construction project.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA clean, balanced sound with good speech intelligibility – present enough for music while cooking, working or eating, discreet enough not to intrude. The frequency response spans 50 Hz to 40 kHz, and the pivoting tweeter makes sure the treble reaches you even from a corner installation.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the InWall 845 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor hallways, kitchens, bedrooms, home offices and multiroom zones – anywhere the technology should stay invisible. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e with 86.5 dB sensitivity and 100 watts of music power handling, it's no candidate for large, open-plan living spaces. Anyone wanting to fill a living room as a main system should reach for the 865 or 989 instead. Honestly – for a secondary zone, anything bigger would just be expensive overkill.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe honest entry point into invisible sound: small in cutout, cleanly built, without any airs. Honestly: the 845 won't win a sound contest against a floorstander – nor does it want to. It reliably solves the task of \"music in the room, without anyone seeing it.\" At HD Zürisee in Wädenswil, we tell you upfront whether your wall construction will play along.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: wall \u0026amp; ceiling in-wall speaker, 2-way Free Air, passive\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 135 mm aluminium woofer\/midrange, 1× 25 mm aluminium tweeter (pivoting)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 50–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 2,900 Hz\u003c\/li\u003e\n\u003cli\u003ePower handling: 50 W nominal \/ 100 W music power\u003c\/li\u003e\n\u003cli\u003eSensitivity: 86.5 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eImpedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003eTreble level adjustment: switchable\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 190 × 270 × 75 mm\u003c\/li\u003e\n\u003cli\u003eCutout (W×H): 152 × 233 mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 68 mm\u003c\/li\u003e\n\u003cli\u003eMax. wall thickness: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3 kg per unit (2.6 kg per pair)\u003c\/li\u003e\n\u003cli\u003eConnection: gold-plated screw terminals (Easy-Link terminal)\u003c\/li\u003e\n\u003cli\u003eFront grille: metal, magnetically held, paintable\u003c\/li\u003e\n\u003cli\u003eOptional accessory: ER 4 mounting frame for solid-wall installation\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2 in-wall speakers (pair), 2 removable magnetic grilles, mounting template\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big does the cutout for the InWall 845 need to be?\u003c\/h3\u003e\n\u003cp\u003eThe cutout measures 152 × 233 mm at 68 mm installation depth and a maximum wall thickness of 40 mm, with visible outer dimensions of 190 × 270 mm. This means the 845 also fits between narrow stud spacing. Still, check for wiring and pipes beforehand – or have Mauri, our technician, measure the location in advance.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 845 also work in a solid wall?\u003c\/h3\u003e\n\u003cp\u003eYes. In stud framing it sits directly in the cavity; in brick or concrete a niche is needed. Canton offers the optional ER 4 mounting frame for this, which considerably simplifies installation in solid walls. We'll work out beforehand which variant makes sense for you.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 845 need a back box?\u003c\/h3\u003e\n\u003cp\u003eNot strictly necessary – the 845 works on the Free Air principle and uses the cavity as its volume. A back box becomes worthwhile when sound shouldn't travel into the neighbouring room or the stairwell. In rental flats and multi-family houses, that's often the deciding detail.\u003c\/p\u003e\n\u003ch3\u003eWhich rooms is the InWall 845 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor normal-sized living spaces, hallways, kitchens, bedrooms, or as a discreet stereo zone in a multiroom setup. It's not designed for bathrooms or wellness areas, which need moisture-resistant models instead. If it's meant to carry a large living room as the main system, the 865 or 989 are the better-suited candidates.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton InWall 845 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you honestly which InWall model fits your room, instead of automatically recommending the biggest one. HD Zürisee in Wädenswil plans the installation spot, cabling and amplifier with you, and Mauri handles the installation on site. Drop us a line, we'll get back to you.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the drive electronics for one or several zones among the \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e, the connection among the \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e, and mounting aids in the \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e. Larger invisible models can be found among the \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003ein-wall speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, and the brand's whole range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53135606612304,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-inwall-845-einbaulautsprecher-weiss-frontansicht.png?v=1785867090"},{"product_id":"canton-inwall-845-lcr-einbaulautsprecher-weiss","title":"Canton InWall 845 LCR In-Wall Speaker, White (Single)","description":"\u003cp\u003eThe Canton InWall 845 LCR is a passive in-wall speaker in a horizontal format, which Canton explicitly designs for use as a left, right or centre channel.\u003c\/p\u003e\n\u003cp\u003eTwo 135 mm aluminium woofers flank a pivoting 25 mm aluminium tweeter. This arrangement keeps the sound image anchored to the centre even when the speaker sits horizontally in the wall below or above a display.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the InWall 845 LCR?\u003c\/h2\u003e\n\u003cp\u003eBecause in home cinema, the centre channel usually fails on space, not budget. There's no room under the TV, and as soon as something sits on furniture, the soundbar debate starts – here it simply disappears into the wall. With 140 watts of music power handling and 89 dB sensitivity, it still has enough reserve for medium to large rooms, and the pivoting tweeter aims at the seating row instead of the ceiling.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eAbove all, intelligible dialogue. That's precisely a centre channel's core job, and the 845 LCR handles it cleanly: voices stay stable and centred without thinning out as things get louder. The two aluminium drivers reach down to 42 Hz and give effects some substance, while the top end stays open up to 40 kHz.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the InWall 845 LCR suited to?\u003c\/h3\u003e\n\u003cp\u003eFor home cinema and stereo projects where the entire front should stay invisible – one unit as a centre channel, three as a complete LCR front. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e it's sold as a single unit, so you need to work out for yourself how many channels you need. And if you simply want stereo out of the wall, the vertical-format InWall 845 as a pair is the more straightforward solution.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most unobtrusive route to a proper centre channel. Handles level well, can be aimed, integrates cleanly – and is flat enough that the wall doesn't turn into a construction project. Honestly: an LCR setup stands or falls with the planning, not the speaker. That's why, at HD Zürisee in Wädenswil, we first settle installation heights, channel count and cable routing – only then does the sawing start.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: horizontal-format wall \u0026amp; ceiling in-wall speaker, 2-way Free Air, passive (L\/C\/R capable)\u003c\/li\u003e\n\u003cli\u003eDrivers: 2× 135 mm aluminium woofer\/midrange, 1× 25 mm aluminium tweeter (pivoting)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 42–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 2,800 Hz\u003c\/li\u003e\n\u003cli\u003ePower handling: 70 W nominal \/ 140 W music power\u003c\/li\u003e\n\u003cli\u003eSensitivity: 89 dB (2.83 V \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eImpedance: 8 Ω\u003c\/li\u003e\n\u003cli\u003eTreble level adjustment: switchable\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 400 × 190 × 75 mm\u003c\/li\u003e\n\u003cli\u003eCutout (W×H): 362 × 152 mm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 68 mm\u003c\/li\u003e\n\u003cli\u003eMax. wall thickness: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2 kg\u003c\/li\u003e\n\u003cli\u003eConnection: gold-plated screw terminals (Easy-Link terminal)\u003c\/li\u003e\n\u003cli\u003eFront grille: metal, magnetically held, frameless finish, paintable\u003c\/li\u003e\n\u003cli\u003eOptional accessory: ER 4 LCR mounting frame for solid-wall installation\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 piece\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 in-wall speaker, removable magnetic grille, mounting template\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big is the cutout for the InWall 845 LCR?\u003c\/h3\u003e\n\u003cp\u003eThe cutout measures 362 × 152 mm, the installation depth 68 mm, and the maximum wall thickness 40 mm. The visible outer dimensions are 400 × 190 mm. Because the cutout can run horizontally across two stud bays, it's worth having Mauri measure the location in advance.\u003c\/p\u003e\n\u003ch3\u003eIs the 845 LCR a single speaker or a pair?\u003c\/h3\u003e\n\u003cp\u003eIt's sold individually as a single unit. You need one for an invisible centre channel, three for a complete LCR front. If you simply want classic stereo out of the wall, the vertical-format InWall 845 as a pair is the more straightforward solution. We'll plan either variant with you.\u003c\/p\u003e\n\u003ch3\u003eCan the 845 LCR go behind a screen or a projector canvas?\u003c\/h3\u003e\n\u003cp\u003eIt's ideally placed below or above a display, since the horizontal format is flat. It doesn't belong directly behind a normal projector canvas – that requires acoustically transparent fabric. We'll work out with you which arrangement in your room brings together screen height and dialogue anchoring.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 845 LCR need a back box?\u003c\/h3\u003e\n\u003cp\u003eNot strictly necessary; it plays as a Free Air system into the wall volume. A back box does bring quiet to the neighbouring room and a more defined volume, though, which becomes audible especially with a centre channel. For solid walls, the optional ER 4 LCR mounting frame is available. It's not built for bathrooms, saunas or outdoor use.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton InWall 845 LCR at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an LCR setup out of the wall needs planning: channel count, installation height, level and calibration all interlock. Our team in Wädenswil works this out with you, supplies the matching home cinema electronics, and Mauri installs it on site. Call us or write to us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the surround partners among the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e, the low end at the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e, and the electronics under \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e. More invisible models can be found among the \u003ca href=\"\/en-ch\/collections\/einbaulautsprecher\"\u003ein-wall speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, with shelf alternatives among the \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53135607562576,"sku":null,"price":305.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-inwall-845-lcr-einbaulautsprecher-weiss-frontansicht.png?v=1785867059"},{"product_id":"canton-atelier-inwall-11-einbaulautsprecher-weiss","title":"Canton Atelier InWall 11 Ceiling Speaker, White (Piece)","description":"\u003cp\u003eThe Canton Atelier InWall 11 is a flat 3-way in-wall speaker that makes stereo and front sound disappear flush into the wall.\u003c\/p\u003e\n\u003cp\u003eAll that's visible is a frameless, silk-matte white fabric cover – everything else sits behind the wall plane at 8.2 cm installation depth. If you want big sound without a piece of furniture next to it, this gives you both at once.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 11?\u003c\/h2\u003e\n\u003cp\u003eBecause flat doesn't have to mean thin-sounding. Two 174 mm woofers in aluminium-titanium work together with two passive radiators, pulling extension down to 32 Hz out of a panel barely deeper than a bookshelf. The 25 mm aluminium tweeter sits between them, keeping voices and fine detail at ear height.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eBass with contour instead of wall-thump, clean mids, treble that still doesn't grate after the third hour. As a stereo pair in the living room, or as the left and right front in a built-in home cinema, the InWall 11 builds a stage that feels noticeably bigger than the wall opening suggests.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 11 suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anything that's planned: new build, renovation, media wall, a living room with a clean look. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e if you want to set something up today and rearrange it next month, you're better served with a freestanding speaker – an in-wall speaker doesn't move house. It's also not made for bathrooms, saunas or outdoor areas.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOne of the most elegant ways to bring serious hi-fi into a room without the room noticing. When architecture and acoustics usually clash, the InWall 11 is the referee – and it calls the game surprisingly well.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 3-way bass-reflex system with passive radiators (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 25 mm aluminium tweeter, 2× 174 mm aluminium-titanium woofer, 2× passive radiators\u003c\/li\u003e\n\u003cli\u003eFrequency range: 32–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling (nominal\/music): 140 \/ 200 W\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89.5 dB\u003c\/li\u003e\n\u003cli\u003eCutout (wall opening): 28.5 × 111 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 8.2 cm\u003c\/li\u003e\n\u003cli\u003eOverall size incl. cover (W × H × D): 32.5 × 115 × 9.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 13 kg\u003c\/li\u003e\n\u003cli\u003eFinish: silk-matte white, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 piece\u003c\/li\u003e\n\u003cli\u003eScope of delivery: in-wall speaker with frameless fabric cover, mounting set (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wall cutout and installation depth does the Atelier InWall 11 need?\u003c\/h3\u003e\n\u003cp\u003eThe wall cutout measures 28.5 × 111 cm, the installation depth is 8.2 cm. That fits the InWall 11 into standard drywall and into prepared solid walls. Whether your specific wall structure cooperates is something we check together before the first cut – ideally using your plans or a photo.\u003c\/p\u003e\n\u003ch3\u003eDo I need to build a back chamber behind the speaker?\u003c\/h3\u003e\n\u003cp\u003eThe InWall 11 works as a bass-reflex system with its own passive radiators and is designed to be set into the wall cavity. How much insulation or sealing your structure additionally needs depends on the framing and the neighbouring room. Mauri, our technician, assesses that on site.\u003c\/p\u003e\n\u003ch3\u003eIs the InWall 11 suited for stereo or for home cinema?\u003c\/h3\u003e\n\u003cp\u003eBoth. As a pair it plays full-fledged stereo, and as the left and right front it forms the basis of an invisible home cinema. For dialogue, you add the matching centre, the Atelier InWall 11 C. We work out beforehand, not afterwards, which combination suits your room.\u003c\/p\u003e\n\u003ch3\u003eIs the Atelier InWall 11 delivered singly or in pairs?\u003c\/h3\u003e\n\u003cp\u003eSingly. Canton lists the Atelier InWall 11 as an individual speaker, and accordingly our sales unit is also per piece. For classic stereo, or a left-and-right front, you need two pieces; for home cinema the centre is added. We put the parts list together for you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 11 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an in-wall speaker stands or falls with the planning: wall structure, height, cable routing, amplifier. We at HD Zürisee in Wädenswil have done this for years, think through your room with you, and send Mauri for installation and wiring. Call us or drop us a short message.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, the matching centre channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e. For the last bit of low-end, take a look at the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e, the electronics to go with them are under \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e. We also have matching \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e for in-wall routing, and the full range of the brand is in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136387277136,"sku":null,"price":899.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-11-einbaulautsprecher-weiss-frontansicht.png?v=1785864838"},{"product_id":"canton-atelier-inwall-11-einbaulautsprecher-schwarz","title":"Canton Atelier InWall 11 Wall Speaker, Black (Piece)","description":"\u003cp\u003eThe Canton Atelier InWall 11 is a flat 3-way in-wall speaker that makes fully grown stereo and front sound disappear into the wall plane.\u003c\/p\u003e\n\u003cp\u003eIn silk-matte black it becomes practically part of the surface on a dark wall or in a media panel. Behind the frameless fabric cover sits a complete 3-way system with 8.2 cm installation depth – more speaker than you'd credit a wall panel with.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 11?\u003c\/h2\u003e\n\u003cp\u003eBecause Canton doesn't cut corners where it would hurt. Two 174 mm woofers in aluminium-titanium get two passive radiators alongside them, instead of simply drilling a hole for the bass and hoping for the best. Result: 32 Hz low-end extension, 89.5 dB sensitivity and 140 watts nominal power handling.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA sound that stands in the room instead of clinging to the wall. Voices stay full-bodied, bass lines stay legible, and with film sound the InWall 11 handles bigger levels too, without turning thin or harsh. You hear music, not a construction project.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 11 suited for?\u003c\/h3\u003e\n\u003cp\u003eFor drywall and prepared solid walls, for media walls, for living spaces with a clean look. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e if you like to rearrange your setup every few months, stick with freestanding speakers – a wall opening of 28.5 × 111 cm doesn't forgive a change of mind. Canton also doesn't state approval for moisture rooms or outdoor use for the Atelier InWall series; we plan other models for those.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eIf hi-fi should stay invisible in the room without the sound disappearing with it, the Atelier InWall 11 is one of the cleanest solutions in its class. Hand on heart: most guests will only find it once you tell them where it is.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 3-way bass-reflex system with passive radiators (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 25 mm aluminium tweeter, 2× 174 mm aluminium-titanium woofer, 2× passive radiators\u003c\/li\u003e\n\u003cli\u003eFrequency range: 32–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling (nominal\/music): 140 \/ 200 W\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89.5 dB\u003c\/li\u003e\n\u003cli\u003eCutout (wall opening): 28.5 × 111 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 8.2 cm\u003c\/li\u003e\n\u003cli\u003eOverall size incl. cover (W × H × D): 32.5 × 115 × 9.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 13 kg\u003c\/li\u003e\n\u003cli\u003eFinish: silk-matte black, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 piece\u003c\/li\u003e\n\u003cli\u003eScope of delivery: in-wall speaker with frameless fabric cover, mounting set (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow large does the wall opening for the Atelier InWall 11 need to be?\u003c\/h3\u003e\n\u003cp\u003eThe cutout is 28.5 × 111 cm at 8.2 cm installation depth; with the cover, the speaker measures 32.5 × 115 × 9.5 cm. Plan the opening so it fits between the studs. We work this out beforehand on your floor plan.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 11 also fit a solid wall?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as the niche is prepared: 8.2 cm usable depth plus room for cables and terminals. In concrete or brick that means chasing or a false wall. We discuss exactly this preparation with you and your tradesperson before anyone reaches for the hammer drill.\u003c\/p\u003e\n\u003ch3\u003eWhat amplifier does the InWall 11 need?\u003c\/h3\u003e\n\u003cp\u003eIt's passive and wants a stable amplifier: nominal impedance 4 to 8 ohms, 140 watts nominal and 200 watts music power handling. A solid stereo integrated amp or AV receiver with some headroom is entirely sufficient. We tell you what power your room actually needs, without padding it upward.\u003c\/p\u003e\n\u003ch3\u003eDo I get the InWall 11 singly or only as a pair?\u003c\/h3\u003e\n\u003cp\u003eSingly. Canton lists the Atelier InWall 11 as a single speaker, and that's how we sell it too – sales unit per piece. For stereo you order two, for a home-cinema front two plus the centre InWall 11 C. We put the list together for you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 11 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with us you don't just get the panel, you get the planning around it: position, wall structure, cable routing, amplifier. The seasoned team at HD Zürisee in Wädenswil knows these installations from practice, and Mauri handles installation and wiring on site.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAll flat models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, the matching dialogue channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e. If you're planning a complete film system, the remaining building blocks are under \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e. Amplifiers are with the \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e, the rest of the Canton range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136387309904,"sku":null,"price":899.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-11-einbaulautsprecher-schwarz-schraegansicht.jpg?v=1785864805"},{"product_id":"canton-atelier-inwall-9-einbaulautsprecher-weiss","title":"Canton Atelier InWall 9 Wall Speaker, White (Piece)","description":"\u003cp\u003eThe Canton Atelier InWall 9 is a slim 3-way in-wall speaker that fits stereo and surround sound flush into the wall.\u003c\/p\u003e\n\u003cp\u003eIt's the more compact variant of the Atelier InWall 11: a narrower cutout, the same 8.2 cm installation depth, the same idea. In silk-matte white with a frameless fabric cover, visually there's almost nothing left of it – acoustically there's surprisingly much.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 9?\u003c\/h2\u003e\n\u003cp\u003eBecause a 128 mm aluminium-titanium woofer\/midrange driver, together with two passive radiators, reaches all the way down to 35 Hz. That's remarkable for a panel just 24.5 cm wide, and makes it a full-fledged main speaker in normal-sized living rooms, not a stopgap.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA tidy, airy sound with surprisingly much substance in the foundation. Voices sit clearly in the centre, instruments keep their size, and because it sits in the wall at ear height, you hear the room the recording brings with it, not a box.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 9 suited for?\u003c\/h3\u003e\n\u003cp\u003eFor living rooms, offices and multi-room systems where no speaker should be visible. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e if you want to fill a big room at home-cinema level, go straight for the Atelier InWall 11 or plan in a subwoofer. The InWall 9 is the balanced one, not the muscle-bound one.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe all-rounder of the Atelier InWall range: enough low-end for serious music, narrow enough for almost any wall. If you want hi-fi and your interior designer doesn't, this is the solution that lets both sleep well.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 3-way bass-reflex system with passive radiators (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 25 mm aluminium tweeter, 1× 128 mm aluminium-titanium woofer\/midrange, 2× passive radiators\u003c\/li\u003e\n\u003cli\u003eFrequency range: 35–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling (nominal\/music): 120 \/ 180 W\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89.5 dB\u003c\/li\u003e\n\u003cli\u003eCutout (wall opening): 20.5 × 91 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 8.2 cm\u003c\/li\u003e\n\u003cli\u003eOverall size incl. cover (W × H × D): 24.5 × 95 × 8.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 kg\u003c\/li\u003e\n\u003cli\u003eFinish: silk-matte white, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 piece\u003c\/li\u003e\n\u003cli\u003eScope of delivery: in-wall speaker with frameless fabric cover, mounting set (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wall cutout does the Atelier InWall 9 need?\u003c\/h3\u003e\n\u003cp\u003eThe cutout measures 20.5 × 91 cm at 8.2 cm installation depth; with the cover the speaker comes to 24.5 × 95 × 8.5 cm. The width usually fits between two studs in drywall. We check your wall structure beforehand using photos or plans.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference to the Atelier InWall 11?\u003c\/h3\u003e\n\u003cp\u003eThe InWall 9 is narrower, lighter and reaches down to 35 Hz; the InWall 11 plays down to 32 Hz, handles more power and needs noticeably more wall. For normal living spaces the 9 is comfortably enough, in large rooms the 11 pays off. We help place that for your room.\u003c\/p\u003e\n\u003ch3\u003eDoes the wall cavity need a back chamber or insulation?\u003c\/h3\u003e\n\u003cp\u003eThe InWall 9 brings its own bass-reflex system with passive radiators and is set into the cavity. Whether extra insulation or sealing towards the neighbouring room makes sense depends on the specific structure. Mauri, our technician, assesses that on site for you.\u003c\/p\u003e\n\u003ch3\u003eIs the Atelier InWall 9 sold singly or in pairs?\u003c\/h3\u003e\n\u003cp\u003eSingly – Canton lists it as an individual speaker, and our sales unit is accordingly per piece. For stereo you need two, for a surround system correspondingly more plus the centre Atelier InWall 9 C. We work out the quantities with you beforehand.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 9 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with an in-wall speaker, the planning decides the result: height, distance, wall structure, cable routing. HD Zürisee in Wädenswil brings years of practice to this and sends Mauri for installation and wiring. Call us or message us on WhatsApp.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore flat models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, the matching dialogue channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e. If something's still missing on the low end, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e helps; the electronics to go with it are with the \u003ca href=\"\/en-ch\/collections\/alle-verstaerker\"\u003eamplifiers\u003c\/a\u003e. Cables for in-wall routing are under \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e, the whole range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136388915536,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-9-einbaulautsprecher-weiss-schraegansicht.png?v=1785864959"},{"product_id":"canton-atelier-inwall-9-einbaulautsprecher-schwarz","title":"Canton Atelier InWall 9 Wall Speaker, Black (Piece)","description":"\u003cp\u003eThe Canton Atelier InWall 9 is a slim 3-way in-wall speaker for flush installation into drywall and prepared solid walls.\u003c\/p\u003e\n\u003cp\u003eThe silk-matte black finish is the right one when the wall is dark anyway, or the speaker sits in a panel. What stays visible is a frameless fabric cover; the rest sits behind the wall plane at 8.2 cm installation depth.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 9?\u003c\/h2\u003e\n\u003cp\u003eBecause here Canton bets on principle rather than width: a 128 mm aluminium-titanium woofer\/midrange driver, two passive radiators and a 25 mm aluminium tweeter add up to a genuine 3-way system. Hence 35 Hz low-end extension and 120 watts nominal power handling from a panel only 24.5 cm wide.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eMusic that stands in the room instead of pressing out of the wall. The bass is dry rather than bloated, the mids open, the treble refined. And because two of them span a surprisingly precise stereo centre, you'll miss floorstanding speakers less than you'd think.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 9 suited for?\u003c\/h3\u003e\n\u003cp\u003eFor planned wall integrations in living, work and secondary rooms. \u003cstrong\u003eHonestly:\u003c\/strong\u003e a cutout of 20.5 × 91 cm remains a structural decision – if you want to stay flexible, you're better off with bookshelf speakers. Canton doesn't state approval for the Atelier InWall series in moisture rooms or outdoors; we plan different models for that.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most sensible entry into invisible hi-fi, without \"invisible\" becoming an excuse for thin sound. Hand on heart: in most living rooms, the 9 is the right choice, not the bigger sibling.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 3-way bass-reflex system with passive radiators (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 25 mm aluminium tweeter, 1× 128 mm aluminium-titanium woofer\/midrange, 2× passive radiators\u003c\/li\u003e\n\u003cli\u003eFrequency range: 35–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003ePower handling (nominal\/music): 120 \/ 180 W\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89.5 dB\u003c\/li\u003e\n\u003cli\u003eCutout (wall opening): 20.5 × 91 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 8.2 cm\u003c\/li\u003e\n\u003cli\u003eOverall size incl. cover (W × H × D): 24.5 × 95 × 8.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 kg\u003c\/li\u003e\n\u003cli\u003eFinish: silk-matte black, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 piece\u003c\/li\u003e\n\u003cli\u003eScope of delivery: in-wall speaker with frameless fabric cover, mounting set (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow deep does the wall need to be for the Atelier InWall 9?\u003c\/h3\u003e\n\u003cp\u003eYou need 8.2 cm of usable installation depth plus a little room for cables and terminals, along with a cutout of 20.5 × 91 cm. A standard drywall wall meets that. In solid walls, we plan in a niche or a false wall together – before the first cut.\u003c\/p\u003e\n\u003ch3\u003eCan I use the InWall 9 as a rear or effect speaker?\u003c\/h3\u003e\n\u003cp\u003eYes. In a permanently built-in surround system it works as a front, rear or side channel, because its voicing and efficiency match the other Atelier InWall models. How many channels your room can sensibly carry, we discuss before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat amplifier power suits the InWall 9?\u003c\/h3\u003e\n\u003cp\u003eIt runs passively at 4 to 8 ohms and handles 120 watts nominal, 180 watts music power. A solid integrated amplifier or AV receiver with some headroom is entirely sufficient. We tell you what power your room actually needs, without an unnecessary markup.\u003c\/p\u003e\n\u003ch3\u003eDo I get the InWall 9 singly or only as a pair?\u003c\/h3\u003e\n\u003cp\u003eSingly. The sales unit is one piece, just as Canton lists the Atelier InWall 9. For stereo you order two, for surround correspondingly more. We put the list together for you so nothing's missing on installation day.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 9 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you beforehand what will work, and we're there afterwards for the installation. The team at HD Zürisee in Wädenswil plans position, wiring and amplifier with you – Mauri, our technician, handles the installation on site. Just get in touch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAll models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003ewall speakers\u003c\/a\u003e, the matching centre under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003ecentre speakers\u003c\/a\u003e. Freestanding alternatives are found among the \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e. Electronics are under \u003ca href=\"\/en-ch\/collections\/hifi-elektronik\"\u003ehi-fi electronics\u003c\/a\u003e, installation material in the \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136388948304,"sku":null,"price":799.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-9-einbaulautsprecher-schwarz-schraegansicht.png?v=1785864921"},{"product_id":"canton-atelier-inwall-5-einbaulautsprecher-weiss","title":"Canton Atelier InWall 5 In-Wall Speaker, White (Each)","description":"\u003cp\u003eThe Canton Atelier InWall 5 is a passive 2-way in-wall speaker that lets music and film sound disappear flush into the wall.\u003c\/p\u003e\n\u003cp\u003eAll that stays visible is the frameless fabric cover in white silk matt; the rest sits completely in the wall at just 7.2 cm installation depth. Made for anyone who wants good sound without a box standing in the room – living room, kitchen, hallway, surround extension.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 5?\u003c\/h2\u003e\n\u003cp\u003eBecause the technology here hasn't simply been flattened out. A 128 mm aluminium-titanium woofer\/midrange driver works against a passive radiator, while the 25 mm aluminium tweeter with wave guide spreads the treble evenly across the room instead of onto just one seat. Plus its own enclosure: the InWall 5 doesn't depend on the wall supplying its bass volume. That makes planning more honest – you get the sound stated on the spec sheet, not whatever your wall construction happens to allow.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA tidy, unobtrusive sound with clearly intelligible voices and fine, never harsh treble. The bass reaches down to 40 Hz, further than you'd expect from an 8.8 cm flat enclosure – enough for ambience, jazz, singer-songwriter material and most film sound. As a stereo pair in a living space, the music stays where it belongs: in the room, not stuck to the wall.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 5 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor anyone whose interior design gets a say: open-plan living spaces, rented flats with renovation approval, remodels where the cabling is already in the wall anyway. Also a clean solution as a surround channel to a larger front system. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e anyone after home-cinema punch in the gut, or wanting to fill a 40-square-metre room with these alone, needs a subwoofer alongside them – or a larger model straight away. And anyone who isn't allowed or doesn't want to cut into the wall is better served by a bookshelf speaker. We'd rather tell you that up front than afterwards.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe sensible all-rounder among in-wall speakers: unobtrusive in looks, balanced in sound, uncomplicated to install. Anyone who wants the box out of the room without throwing away the sound along with it lands exactly right here.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 2-way bass reflex with passive radiator (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 128 mm aluminium-titanium woofer\/midrange driver, 1× 25 mm aluminium tweeter with wave guide, 1× passive radiator\u003c\/li\u003e\n\u003cli\u003eFrequency range: 40–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89 dB\u003c\/li\u003e\n\u003cli\u003ePower handling: 70 W nominal \/ 140 W music\u003c\/li\u003e\n\u003cli\u003eCut-out (wall opening): 18.4 × 53.4 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 7.2 cm\u003c\/li\u003e\n\u003cli\u003eExternal dimensions incl. cover plate (W × H × D): 22 × 57 × 8.8 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.47 kg\u003c\/li\u003e\n\u003cli\u003eFinish: white silk matt, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: each\u003c\/li\u003e\n\u003cli\u003eWhat's included: 1 in-wall speaker with fabric cover, mounting kit (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wall cut-out and installation depth does the Atelier InWall 5 need?\u003c\/h3\u003e\n\u003cp\u003eThe cut-out measures 18.4 × 53.4 cm, the installation depth is 7.2 cm. In stud walls you need to watch the spacing between studs; in solid walls, a recess is chased out. Mauri, our technician, measures this on site, checks the wall construction and handles the installation.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 5 need a rear enclosure in the wall?\u003c\/h3\u003e\n\u003cp\u003eNo. The InWall 5 comes with its own enclosure with a passive radiator and doesn't depend on the wall's volume. So you don't need an additional rear chamber. What's worthwhile regardless: insulating the cavity wall so less sound travels into the room next door.\u003c\/p\u003e\n\u003ch3\u003eCan I install the InWall 5 in a bathroom or kitchen?\u003c\/h3\u003e\n\u003cp\u003eIn the kitchen, yes; in the bathroom, only outside the splash zone. Canton doesn't state any wet-room certification for the Atelier InWall 5 – the chassis is built for normal living spaces. For a shower, wellness area or outdoor area, we'll plan in a solution explicitly rated for wet rooms.\u003c\/p\u003e\n\u003ch3\u003eIs a pair of InWall 5 enough without a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eFor music in small to medium living spaces, yes – a 40 Hz lower cut-off is decent for an in-wall speaker. For home cinema with punch in the gut, or for large, open rooms, you add a subwoofer. Two pieces make a stereo pair; it's sold by the piece.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 5 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an in-wall speaker can't be repositioned once you've drilled. We go through position, cut-out and cabling with you beforehand, and our technician Mauri handles the on-site installation. Call or message us, and we'll look at your room together.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching center and further wall solutions under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003eCenter Speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e. For extra depth, a look at the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e is worthwhile, and for complete film sound, the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e. The necessary \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e is best fitted at the same time, while the wall is still open. The brand's full range is in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136394944848,"sku":null,"price":599.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-5-einbaulautsprecher-weiss-schraegansicht.png?v=1785864720"},{"product_id":"canton-atelier-inwall-5-einbaulautsprecher-schwarz","title":"Canton Atelier InWall 5 In-Wall Speaker, Black (Each)","description":"\u003cp\u003eThe Canton Atelier InWall 5 is a passive 2-way in-wall speaker that, in black silk matt, blends almost invisibly into dark walls and recesses.\u003c\/p\u003e\n\u003cp\u003eThe frameless fabric cover sits flush with the wall surface, with the entire enclosure disappearing behind it at 7.2 cm installation depth. The black finish is the top choice for home cinema rooms, dark accent walls and anything that should visually recede.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 5 in black?\u003c\/h2\u003e\n\u003cp\u003eBecause black simply disappears in a darkened room – and because behind it sits the same serious engineering found in every Atelier model. A 128 mm aluminium-titanium woofer\/midrange driver couples to a passive radiator, topped by a 25 mm aluminium tweeter with wave guide that spreads the treble broadly across the room instead of concentrating it on a single armchair. 70 watts nominal and 140 watts music power handling are enough for noticeably more level than is diplomatically advisable in a rented flat.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eVoices come across clear and close, treble stays fine rather than sharp, and the bass goes down to 40 Hz – respectable for an enclosure only 8.8 cm deep. Because the chassis brings its own volume, the InWall 5 sounds the same in a brick wall as in drywall. That predictability is worth more during installation than any extra decibel.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 5 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor home cinema setups where the front should stay invisible, for surround channels on the side wall, and for living spaces where stereo is wanted but no speaker is allowed. \u003cstrong\u003eHonestly:\u003c\/strong\u003e if you're after deep bass you can feel in the sofa, add a subwoofer – no in-wall speaker changes that. And anyone who only rents and isn't allowed to cut into the wall saves themselves a lot of hassle and is better off looking at bookshelf speakers.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA thoroughly solid in-wall speaker without any show: cleanly tuned, robust, easy to install, and in black, ultimately invisible. If the architecture should win without the sound losing out, this is the pragmatic answer.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 2-way bass reflex with passive radiator (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 128 mm aluminium-titanium woofer\/midrange driver, 1× 25 mm aluminium tweeter with wave guide, 1× passive radiator\u003c\/li\u003e\n\u003cli\u003eFrequency range: 40–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 89 dB\u003c\/li\u003e\n\u003cli\u003ePower handling: 70 W nominal \/ 140 W music\u003c\/li\u003e\n\u003cli\u003eCut-out (wall opening): 18.4 × 53.4 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 7.2 cm\u003c\/li\u003e\n\u003cli\u003eExternal dimensions incl. cover plate (W × H × D): 22 × 57 × 8.8 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.47 kg\u003c\/li\u003e\n\u003cli\u003eFinish: black silk matt, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: each\u003c\/li\u003e\n\u003cli\u003eWhat's included: 1 in-wall speaker with fabric cover, mounting kit (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big does the wall cut-out for the Atelier InWall 5 need to be?\u003c\/h3\u003e\n\u003cp\u003e18.4 × 53.4 cm at 7.2 cm installation depth. In drywall, the stud spacing determines whether the position works; in concrete or brick, a recess needs to be chased out. Our technician Mauri looks at the wall construction on site and handles the installation.\u003c\/p\u003e\n\u003ch3\u003eDoes an enclosure need to sit behind the InWall 5?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily. The chassis sits in its own enclosure with a passive radiator and doesn't need the wall's volume. An insulated cavity wall is still worthwhile regardless, especially if a bedroom or neighbouring room lies behind it – it saves discussions later.\u003c\/p\u003e\n\u003ch3\u003eIs the black InWall 5 rated for wet rooms?\u003c\/h3\u003e\n\u003cp\u003eNo. Canton doesn't state a wet-room or IP rating for the Atelier InWall series. Installation is unproblematic in the kitchen and hallway; in the bathroom, only well away from the shower and tub. For genuine wet areas, we'll find you a model built specifically for that.\u003c\/p\u003e\n\u003ch3\u003eCan I run the InWall 5 as a surround speaker?\u003c\/h3\u003e\n\u003cp\u003eYes, that's one of its strongest roles. With 89 dB sensitivity and 4 to 8 ohms, it works with any standard AV receiver. As a rear or side channel to larger front speakers, it delivers clean effects without standing out visually.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 5 in black from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with an in-wall speaker, planning decides more than the spec sheet. We clarify wall construction, cable routing and amplifier beforehand, and Mauri installs on site. Message us by email or WhatsApp, and we'll discuss your project at your own pace.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore invisible solutions are found under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e, the matching dialogue channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003eCenter Speakers\u003c\/a\u003e. For movie nights, add a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofer\u003c\/a\u003e and browse the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e. Matching \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e belongs in the wall before it's closed up. Everything from the brand is in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136397599056,"sku":null,"price":599.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-5-einbaulautsprecher-schwarz-schraegansicht.png?v=1785864721"},{"product_id":"canton-atelier-inwall-3-einbaulautsprecher-weiss","title":"Canton Atelier InWall 3 In-Wall Speaker, White (Each)","description":"\u003cp\u003eThe Canton Atelier InWall 3 is a passive, square 2-way in-wall speaker for spots where an elongated model no longer fits.\u003c\/p\u003e\n\u003cp\u003eWith a 29 × 29 cm cut-out and 7.2 cm installation depth, it disappears completely into the wall; all that stays visible is the frameless fabric cover in white silk matt. The smallest model in the Atelier InWall range – and often the only one that still fits between two studs.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 3?\u003c\/h2\u003e\n\u003cp\u003eBecause the square format creates planning freedom. A 128 mm aluminium-titanium woofer\/midrange driver, a 25 mm aluminium tweeter with wave guide and a passive radiator fit into an enclosure with just 33 × 33 cm external dimensions. Because the enclosure is sealed, it needs no wall volume – it sounds the same in a concrete recess as in drywall. This predictability is exactly what makes planning relaxed.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eA clean, understated sound with clear speech and fine treble. It starts rolling off at 42 Hz, which is entirely sufficient for ambience, radio, podcasts and surround effects. With 88 dB sensitivity and 60 watts nominal power handling, it doesn't make a fuss on a multi-channel receiver either. What it doesn't deliver is deep bass with punch – for that, it's simply too small, and Canton knew that when they built it.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 3 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor surround and effect channels, for sound in kitchens, hallways, offices or corridors, and for small rooms where a stereo pair is enough. Also the most affordable entry into a consistently invisible multi-room system. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e as a main speaker in a large living room, it's out of its depth – that's where a larger model belongs, or at least a subwoofer alongside it. We'd rather tell you that before the cut-out than after.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe series' small pragmatist: unobtrusive, cleanly tuned, and thanks to its square format usable in spots where other in-wall speakers have to make do. As surround and secondary-room sound, a very sensible choice.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 2-way bass reflex with passive radiator, square (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 128 mm aluminium-titanium woofer\/midrange driver, 1× 25 mm aluminium tweeter with wave guide, 1× passive radiator\u003c\/li\u003e\n\u003cli\u003eFrequency range: 42–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 88 dB\u003c\/li\u003e\n\u003cli\u003ePower handling: 60 W nominal \/ 120 W music\u003c\/li\u003e\n\u003cli\u003eCut-out (wall opening): 29 × 29 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 7.2 cm\u003c\/li\u003e\n\u003cli\u003eExternal dimensions incl. cover plate (W × H × D): 33 × 33 × 8.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.85 kg\u003c\/li\u003e\n\u003cli\u003eFinish: white silk matt, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: each\u003c\/li\u003e\n\u003cli\u003eWhat's included: 1 in-wall speaker with fabric cover, mounting kit (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat wall cut-out does the Atelier InWall 3 need?\u003c\/h3\u003e\n\u003cp\u003e29 × 29 cm square, at 7.2 cm installation depth. The square format often fits where elongated models fail because of stud spacing. Mauri, our technician, checks the wall construction beforehand, sets the positions and handles the on-site installation.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 3 need a rear chamber in the wall?\u003c\/h3\u003e\n\u003cp\u003eNo. It brings its own enclosure with a passive radiator and doesn't depend on the wall's volume. This keeps the sound predictable regardless of wall construction. An insulated cavity wall is still worthwhile, though, so less sound travels into the room next door.\u003c\/p\u003e\n\u003ch3\u003eCan the InWall 3 be installed in a kitchen or bathroom?\u003c\/h3\u003e\n\u003cp\u003eIn the kitchen and hallway, yes; in the bathroom, only well outside the splash zone. Canton doesn't state a wet-room rating for the Atelier InWall series. For a shower, wellness room or covered outdoor area, we'll plan in a model approved for that instead.\u003c\/p\u003e\n\u003ch3\u003eWhat is the InWall 3 best suited for?\u003c\/h3\u003e\n\u003cp\u003eAs a surround and effects speaker in home cinema, as invisible sound in secondary rooms, and as a space-saving stereo pair in small rooms. For main speakers in larger rooms, you're better off with the InWall 5 or adding a subwoofer.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with an in-wall speaker, the groundwork decides the result, and a cut-out can't be undone. We plan positions, cut-outs and cable routing with you, and Mauri installs on site. Call or message us, and we'll take a look at your floor plan.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eLarger wall solutions are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e, the matching dialogue channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003eCenter Speakers\u003c\/a\u003e. A \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofer\u003c\/a\u003e provides depth, and you'll find the complete film-sound range under \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e. The \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e belongs in the wall before the plasterer arrives. Everything from the brand is in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136399728976,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-3-einbaulautsprecher-weiss-frontansicht.png?v=1785864774"},{"product_id":"canton-atelier-inwall-3-einbaulautsprecher-schwarz","title":"Canton Atelier InWall 3 In-Wall Speaker, Black (Each)","description":"\u003cp\u003eThe Canton Atelier InWall 3 is a passive, square 2-way in-wall speaker for invisible sound in the smallest of spaces.\u003c\/p\u003e\n\u003cp\u003eIn black silk matt, it's aimed at dark accent walls, media rooms and ceilings where a white frame would stand out. The cut-out measures 29 × 29 cm, the installation depth 7.2 cm – after that, nothing of the technology is visible except the frameless fabric cover.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atelier InWall 3 in black?\u003c\/h2\u003e\n\u003cp\u003eBecause the square format fits in anywhere elongated models fail due to studs or wiring – and because black disappears completely in a darkened room. Inside the enclosure work a 128 mm aluminium-titanium woofer\/midrange driver, a 25 mm aluminium tweeter with wave guide and a passive radiator. The enclosure is sealed, so the speaker doesn't depend on the wall cooperating.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eClear voices, fine treble, a tidy sound picture without being pushy. It rolls off from 42 Hz downward, which is exactly right for effect channels, background music and speech. 88 dB sensitivity means: even a mid-range AV receiver drives several of them without breaking a sweat.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atelier InWall 3 suited to?\u003c\/h3\u003e\n\u003cp\u003eFor surround and Atmos-adjacent effect positions, for secondary-room sound and for small rooms where a pair is enough as a stereo system. In dark cinema rooms, the black finish is the natural choice anyway. \u003cstrong\u003eHonestly:\u003c\/strong\u003e anyone wanting to use it alone to fill a large living room will be disappointed – that's not a weakness of the speaker, it's physics. Fronts belong in a size up, and a subwoofer never hurts.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small, honest in-wall speaker that does exactly what it's built for: playing cleanly and unobtrusively in spots where otherwise nothing works at all. In black, the right choice for media rooms and dark walls.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: in-wall speaker, 2-way bass reflex with passive radiator, square (passive)\u003c\/li\u003e\n\u003cli\u003eDrivers: 1× 128 mm aluminium-titanium woofer\/midrange driver, 1× 25 mm aluminium tweeter with wave guide, 1× passive radiator\u003c\/li\u003e\n\u003cli\u003eFrequency range: 42–40,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity (2.83 V\/1 m): 88 dB\u003c\/li\u003e\n\u003cli\u003ePower handling: 60 W nominal \/ 120 W music\u003c\/li\u003e\n\u003cli\u003eCut-out (wall opening): 29 × 29 cm\u003c\/li\u003e\n\u003cli\u003eInstallation depth: 7.2 cm\u003c\/li\u003e\n\u003cli\u003eExternal dimensions incl. cover plate (W × H × D): 33 × 33 × 8.5 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.85 kg\u003c\/li\u003e\n\u003cli\u003eFinish: black silk matt, frameless fabric cover\u003c\/li\u003e\n\u003cli\u003eSales unit: each\u003c\/li\u003e\n\u003cli\u003eWhat's included: 1 in-wall speaker with fabric cover, mounting kit (brackets and screw set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow big is the cut-out for the Atelier InWall 3 in black?\u003c\/h3\u003e\n\u003cp\u003e29 × 29 cm, installation depth 7.2 cm, cover plate external dimensions 33 × 33 cm. In drywall, the cut-out fits comfortably between two studs; in solid walls, a recess is chiselled out. Our technician Mauri takes a look at this at your place beforehand.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 3 need an enclosure behind it?\u003c\/h3\u003e\n\u003cp\u003eNo. The driver sits in its own enclosure with a passive radiator, so the wall's volume isn't acoustically needed. That means it sounds the same in concrete as in drywall. We only recommend insulating the cavity wall if a bedroom or office lies behind it.\u003c\/p\u003e\n\u003ch3\u003eDoes the InWall 3 tolerate moisture in the bathroom?\u003c\/h3\u003e\n\u003cp\u003eCanton doesn't state a wet-room or IP rating for the Atelier InWall series, so it doesn't belong in the splash zone. Kitchen, hallway and living spaces are unproblematic. If your project includes a genuine wet area, we'll find you a model approved for that.\u003c\/p\u003e\n\u003ch3\u003eCan I mix black and white InWall models?\u003c\/h3\u003e\n\u003cp\u003eTechnically no problem, the colour doesn't change the specs. In practice, black is chosen for dark accent or cinema walls, and white for light ceilings and walls. The fabric cover can also be repainted to match the wall colour.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Atelier InWall 3 in black from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a hole in the wall has no return policy. We go through positions, cut-out dimensions, wall construction and cable routing with you beforehand and send Mauri round for the installation. Get in touch by phone, email or WhatsApp, and we'll plan it together.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore models for the wall are under \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e, the dialogue channel under \u003ca href=\"\/en-ch\/collections\/center-lautsprecher\"\u003eCenter Speakers\u003c\/a\u003e. For bass, check out the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e, for the whole chain \u003ca href=\"\/en-ch\/collections\/heimkino\"\u003eHome Cinema\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e. Plan in \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e too. You'll find the whole brand range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136399761744,"sku":null,"price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-atelier-inwall-3-einbaulautsprecher-schwarz-frontansicht.jpg?v=1785864732"},{"product_id":"canton-smart-libero-surround-lautsprecher-schwarz","title":"Canton Smart Libero Surround Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton Smart Libero is an active wireless speaker that wirelessly extends an existing Canton Smart System with surround, height or front channels.\u003c\/p\u003e\u003cp\u003eNo speaker cable, no extra amplifier: you register the two speakers, each just 11 × 15 × 8 centimetres, in your master device's speaker configuration, and from then on everything runs over radio. 700 grams per unit means, in practice: shelf, wall mount or ceiling – the Libero goes anywhere no one wanted to run a cable before.\u003c\/p\u003e\u003ch2\u003eWhy the Smart Libero?\u003c\/h2\u003e\u003cp\u003eBecause Canton Smart had a gap until now. Anyone wanting surround had to press the noticeably larger soundbox into service as a rear speaker – fine sonically, a statement visually. The Libero is built for exactly this role: 2-way, sealed enclosure, 25 mm fabric dome over a 78 mm cellulose-graphite driver, 70 watts of system power per unit. Small, but not shy.\u003c\/p\u003e\u003ch2\u003eWhat the Libero delivers in the living room\u003c\/h2\u003e\u003cp\u003eIt layers effects cleanly behind the listening position instead of tipping them diffusely into the room. Four Liberos give you a rounded surround image; mounted high on the wall or on the ceiling, they take on the Dolby Atmos layer via the master device. A Canton Smart Sub adds deep bass if needed – wirelessly, of course.\u003c\/p\u003e\u003ch3\u003eWho is the Smart Libero suited to?\u003c\/h3\u003e\u003cp\u003eStraight talk: the Libero is an extension, not a soloist. Without a Canton Smart master device – Smart Soundbar 9 or 10, Smart Sounddeck 100, Smart Connect 5.1 or Smart Amp 5.1 – it stays silent. Anyone looking for a standalone Bluetooth speaker for the office has taken a wrong turn here. Anyone wanting their Canton Smart setup to finally play all around them is exactly right. We'll tell you upfront whether your device fits – honestly, even when the answer is sometimes no.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe missing piece in the Canton Smart ecosystem: a rear and height speaker that's no bigger than its job requires. In black, it recedes so far in front of dark walls, shelves and furniture that in the end only the sound is left.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: active wireless speaker, 2-way, sealed enclosure\u003c\/li\u003e\n\u003cli\u003eDrivers per unit: 1× 25 mm tweeter (fabric), 1× 78 mm woofer\/midrange driver (cellulose-graphite)\u003c\/li\u003e\n\u003cli\u003eSystem power: 70 watts per unit\u003c\/li\u003e\n\u003cli\u003eFrequency range: 40–23,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eWireless connection: proprietary Canton Smart radio link from the master device in the 5.2–5.8 GHz band, lossless at 24-bit\/96 kHz (Canton doesn't state a range in metres)\u003c\/li\u003e\n\u003cli\u003eIntegration: via the master device's speaker configuration (control panel or on-screen menu); Canton Smart Remote available as an option\u003c\/li\u003e\n\u003cli\u003eCompatible master devices: Canton Smart Soundbar 9, Smart Soundbar 10, Smart Sounddeck 100, Smart Connect 5.1, Smart Amp 5.1\u003c\/li\u003e\n\u003cli\u003eStreaming: runs via the master device – on the Smart Connect 5.1, for example AirPlay 2, Chromecast built-in, Spotify Connect, UPnP and Bluetooth 4.1 (A2DP, AVRCP)\u003c\/li\u003e\n\u003cli\u003eConnections on the unit: power connection; no audio inputs, playback is exclusively via radio\u003c\/li\u003e\n\u003cli\u003eSystem expansion: on the Smart Connect 5.1, up to 8 wireless Smart speakers, plus up to 6 wired active speakers\u003c\/li\u003e\n\u003cli\u003eWall mounting: enclosure factory-prepared for wall mounting; the Libero wall bracket is an accessory and not included, alternatively the Canton LS 40 stand fits\u003c\/li\u003e\n\u003cli\u003ePlacement: shelf, wall or ceiling – as a front, surround or height channel\u003c\/li\u003e\n\u003cli\u003eEnclosure: near-continuous fabric wrap (interrupted for the wall mount and power feed), glass lid on top, glass base underneath\u003c\/li\u003e\n\u003cli\u003eDimensions per unit (W × H × D): 110 × 150 × 80 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 700 g per unit\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eSales unit: pair\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2× Smart Libero, 2× power cable 1.5 m, quick guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the Canton Smart Libero work without another device?\u003c\/h3\u003e\u003cp\u003eNo. The Smart Libero is an extension speaker and needs a Canton Smart master device as a source, such as a Smart Soundbar 9 or 10, the Smart Sounddeck 100, the Smart Connect 5.1 or the Smart Amp 5.1. The unit has no Bluetooth input of its own.\u003c\/p\u003e\u003ch3\u003eHow is the Smart Libero integrated?\u003c\/h3\u003e\u003cp\u003eVia the master device's speaker configuration: there you choose the position and connection type, then plug in the unit's power cable and the radio link builds itself up. You never need an audio cable, but you do need power at every location. The Canton Smart Remote is available as an option.\u003c\/p\u003e\u003ch3\u003eCan I mount the Smart Libero on a wall or ceiling?\u003c\/h3\u003e\u003cp\u003eYes. The enclosure is factory-prepared for wall mounting; the matching Libero wall bracket is available as an accessory, but it isn't in the box. At 700 grams per unit, the Libero suits shelf, wall and ceiling – all you need is an accessible power outlet, since there's no battery inside.\u003c\/p\u003e\u003ch3\u003eIs the Smart Libero sold individually or as a pair?\u003c\/h3\u003e\u003cp\u003eAs a pair. Canton offers the Smart Libero as a two-piece set, ideal as a left and right rear or height pair. For a 4.0 setup with four units, you'd take two such pairs accordingly. The box contains both speakers, one 1.5-metre power cable each, and the quick guide.\u003c\/p\u003e\u003ch3\u003eWhy buy the Canton Smart Libero from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a surround setup is more than two boxes: master device, placement and channel assignment need to fit together. The HD Zürisee team in Wädenswil plans your Canton Smart System from years of practical experience, and our own technician handles installation and setup. Call or drop us a line.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the matching master device and the rest of your Smart System's building blocks in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e. For deep bass, it's worth a look at the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e, and for the rest of the chain the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e. We'll put the system together to fit your room.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136436265296,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-surround-lautsprecher-schwarz-stereopaar.png?v=1785869352"},{"product_id":"canton-smart-libero-surround-lautsprecher-weiss","title":"Canton Smart Libero Surround Speaker, White (Pair)","description":"\u003cp\u003eThe Canton Smart Libero is an active wireless speaker that wirelessly extends an existing Canton Smart System with surround, height or front channels.\u003c\/p\u003e\u003cp\u003eTwo compact enclosures, one power outlet per unit, not a single signal cable: in white, the Libero all but disappears in front of light walls and ceilings instead of sitting there as a black block in your field of view. It's registered directly at the master device, and from then on it joins in over radio – on a shelf, on a wall bracket, or overhead.\u003c\/p\u003e\u003ch2\u003eWhy the Smart Libero?\u003c\/h2\u003e\u003cp\u003eBecause the rest of the Canton Smart family had long played wirelessly, but a suitably small rear speaker was missing. The Libero closes that gap: 2-way, sealed enclosure, 25 mm fabric dome and 78 mm cellulose-graphite driver, 70 watts of system power per unit. Anyone who's been pressing a large soundbox into service as surround can finally retire it.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eEffects that sit exactly where the film places them – behind you, not smeared somewhere across the room. Two pairs give a rounded surround image; mounted on wall or ceiling, they deliver the Dolby Atmos layer via the master device. Anyone wanting more foundation adds a Canton Smart Sub 8 or Sub 12 – also wireless, also via the same master device. The Libero itself just needs a power outlet and enabling in the speaker configuration, then the master device distributes the channels automatically.\u003c\/p\u003e\u003ch3\u003eWho is the Smart Libero suited to?\u003c\/h3\u003e\u003cp\u003eHonestly: only people who are already at home in the Canton Smart System, or who are just building one. Without a Smart Soundbar 9 or 10, Smart Sounddeck 100, Smart Connect 5.1 or Smart Amp 5.1, the Libero stays a pretty, silent object. As a portable Bluetooth speaker, it's no good. As an unobtrusive rear or height channel in a bright living room, though, it's hard to beat. We'll work out together beforehand whether it makes sense in your case.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eAn extension speaker that knows its job and claims nothing else. The white version is the choice for bright rooms where technology likes to stay invisible – let's be honest, that's exactly why people buy wireless surrounds.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: active wireless speaker, 2-way, sealed enclosure\u003c\/li\u003e\n\u003cli\u003eDrivers per unit: 1× 25 mm tweeter (fabric), 1× 78 mm woofer\/midrange driver (cellulose-graphite)\u003c\/li\u003e\n\u003cli\u003eSystem power: 70 watts per unit\u003c\/li\u003e\n\u003cli\u003eFrequency range: 40–23,000 Hz\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 3,000 Hz\u003c\/li\u003e\n\u003cli\u003eWireless connection: proprietary Canton Smart radio link from the master device in the 5.2–5.8 GHz band, lossless at 24-bit\/96 kHz (Canton doesn't state a range in metres)\u003c\/li\u003e\n\u003cli\u003eIntegration: via the master device's speaker configuration (control panel or on-screen menu); Canton Smart Remote available as an option\u003c\/li\u003e\n\u003cli\u003eCompatible master devices: Canton Smart Soundbar 9, Smart Soundbar 10, Smart Sounddeck 100, Smart Connect 5.1, Smart Amp 5.1\u003c\/li\u003e\n\u003cli\u003eStreaming: runs via the master device – on the Smart Connect 5.1, for example AirPlay 2, Chromecast built-in, Spotify Connect, UPnP and Bluetooth 4.1 (A2DP, AVRCP)\u003c\/li\u003e\n\u003cli\u003eConnections on the unit: power connection; no audio inputs, playback is exclusively via radio\u003c\/li\u003e\n\u003cli\u003eSystem expansion: on the Smart Connect 5.1, up to 8 wireless Smart speakers, plus up to 6 wired active speakers\u003c\/li\u003e\n\u003cli\u003eWall mounting: factory-prepared for wall mounting; the Libero wall bracket is not included but a separate accessory (as is the LS 40 stand)\u003c\/li\u003e\n\u003cli\u003ePlacement: shelf, wall or ceiling – as a front, surround or height channel\u003c\/li\u003e\n\u003cli\u003eEnclosure: near-continuous fabric wrap (interrupted for the wall mount and power feed), glass lid on top, glass base underneath\u003c\/li\u003e\n\u003cli\u003eDimensions per unit (W × H × D): 110 × 150 × 80 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 700 g per unit\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003cli\u003eSales unit: pair\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2× Smart Libero, 2× power cable 1.5 m, quick guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the Canton Smart Libero play without a Canton Smart hub?\u003c\/h3\u003e\u003cp\u003eNo. The Libero is built as an extension and gets its signal over radio from a master device: Smart Soundbar 9 or 10, Smart Sounddeck 100, Smart Connect 5.1 or Smart Amp 5.1. There's no Bluetooth or cable input of its own for music.\u003c\/p\u003e\u003ch3\u003eHow do you pair the Smart Libero with the hub?\u003c\/h3\u003e\u003cp\u003eOn the master device, you open the speaker configuration, set the position and connection type, then plug in the unit's power cable – the radio link is established automatically. Signal cables are eliminated entirely, but every unit needs a power outlet. A Smart Remote is available separately as an accessory.\u003c\/p\u003e\u003ch3\u003eDoes the white Smart Libero also fit on the ceiling?\u003c\/h3\u003e\u003cp\u003eYes. 700 grams of weight and an enclosure of 11 × 15 × 8 centimetres make ceiling and wall mounting straightforward, as well as space on a shelf. The preparation for wall mounting is there from the factory; the matching Libero wall bracket is a separate accessory. In front of bright walls, the white version is barely noticeable.\u003c\/p\u003e\u003ch3\u003eDo I get one Smart Libero unit or two?\u003c\/h3\u003e\u003cp\u003eTwo. Canton sells the Smart Libero as a pair, suited to the left and right side at the back or above. Anyone wanting to add four channels wirelessly takes two pairs. Included are two power cables 1.5 metres long and the quick guide.\u003c\/p\u003e\u003ch3\u003eWhy buy the Canton Smart Libero from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause the units alone don't add up to surround yet: hub, channel assignment and placement decide that. We at HD Zürisee in Wädenswil know the Canton Smart family from everyday practice, set up your system with you, and come by for the installation too. Just get in touch.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching hub and all the other Smart components are in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e. If the setup still lacks depth, take a look at the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003eSubwoofers\u003c\/a\u003e; matching partners for the cinema are under \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003eHome Cinema Speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/wandlautsprecher\"\u003eWall Speakers\u003c\/a\u003e. We're happy to plan the expansion with you.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53136436527440,"sku":null,"price":389.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-surround-lautsprecher-weiss-stereopaar.png?v=1785869378"},{"product_id":"canton-smart-libero-set-2-streaming-set-schwarz","title":"Canton Smart Libero Set 2 Streaming Set, Black (Set)","description":"\u003cp\u003eThe Canton Smart Libero Set 2 is a wireless stereo and streaming set made up of the Smart Connect 5.1 S2 as the hub and two active Smart Libero speakers, connected by radio.\u003c\/p\u003e\n\u003cp\u003eThe hub is just 24.5 centimetres wide and disappears under any TV. It takes up to three HDMI sources, feeds audio back to the TV via eARC, and sends sound wirelessly to the two speakers. There's no signal cable between hub and speakers – each device only needs a power outlet. In black, the set blends in discreetly under dark TVs and on dark sideboards.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Smart Libero Set 2?\u003c\/h2\u003e\n\u003cp\u003eBecause nothing here is thrown together. Canton supplies hub, speakers and remote as a matched package, and the question of the right amplifier never even comes up – power amps and crossover are built into the speakers. Cable gauges, impedances, skirting boards: all things you can skip here. And because the Smart Connect 5.1 S2 manages up to eight wireless Smart speakers, the system grows with you instead of being replaced later.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA tidy stereo system for music and TV sound. Each Smart Libero works two-way and sealed, with a 25 mm fabric tweeter, a 78 mm woofer\/midrange and 70 watts of system power – compact enough for a shelf, wall-mountable if you want it even tidier. The hub switches sources, streams via AirPlay 2, Chromecast built-in and Spotify Connect, and already decodes Dolby Atmos and DTS-HD Master Audio. You add the matching speaker set for that whenever you like.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Set 2 for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: this is a 2.0 system. No subwoofer, no rears, no height channels – if you want surround sound with a foundation from the start, you're better off with the Set 4 plus a Smart Sub. Second honest point: the Smart Libero only work within the Canton Smart ecosystem. On a third-party amplifier they stay silent, and they're no good as secondary speakers either. Tell us about your room, and we'll tell you whether Set 2 is enough.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe cleanest way into Canton's wireless world: a flat hub, two small speakers, no cable clutter – and expandable to home cinema at any time. Honestly, there's hardly a way to get much better sound than your TV speaker for so much less effort.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet type: wireless 2.0 stereo and streaming set, expandable to surround\u003c\/li\u003e\n\u003cli\u003eHub: Canton Smart Connect 5.1 S2, wireless AV preamplifier and streaming hub\u003c\/li\u003e\n\u003cli\u003eChannels: 6 active channels plus up to 8 wireless Canton Smart speakers\u003c\/li\u003e\n\u003cli\u003eHDMI on the hub: 3× input (4K, 3D, HDR, HDCP 2.2, CEC), 1× output with eARC\u003c\/li\u003e\n\u003cli\u003eFurther hub connections: 1× stereo RCA input, 1× optical (Toslink), 2× coaxial, 6× RCA pre-out, LAN (RJ45), 1× USB-A (service only)\u003c\/li\u003e\n\u003cli\u003eAudio formats: Dolby Atmos, Dolby TrueHD, DTS-HD, DTS-HD Master Audio, PCM up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eNetwork and streaming: Wi-Fi 802.11 a\/b\/g\/n\/ac, AirPlay 2, Chromecast built-in, Spotify Connect, Bluetooth 4.1 (A2DP 1.2, AVRCP 1.3)\u003c\/li\u003e\n\u003cli\u003eWireless link: Canton Smart wireless connection between hub and speakers, no signal cable needed\u003c\/li\u003e\n\u003cli\u003eSpeakers: 2× Canton Smart Libero, active, 2-way sealed, each with a 25 mm fabric tweeter and 78 mm cellulose-graphite woofer\/midrange, 70 W system power, 40–23,000 Hz, crossover frequency 3,000 Hz, wall mounting possible\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Connect 5.1 S2 (W × H × D): 24.5 × 5.2 × 13.8 cm, 1.23 kg\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Libero per speaker (W × H × D): 11 × 15 × 8 cm, 0.7 kg\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1× Smart Connect 5.1 S2 with power cable and instructions, 2× Smart Libero each with a 1.5 m power cable and quick guide, 1× Canton Smart Remote Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's included in the Canton Smart Libero Set 2?\u003c\/h3\u003e\n\u003cp\u003eA Smart Connect 5.1 S2 as the hub, two active Smart Libero speakers and the Canton Smart Remote Control. The two Libero play front left and right, while the hub handles source selection, streaming and volume. A subwoofer and surround speakers aren't included, but can be added wirelessly.\u003c\/p\u003e\n\u003ch3\u003eDo I need an additional amplifier or AV receiver?\u003c\/h3\u003e\n\u003cp\u003eNo. The Smart Connect 5.1 S2 is preamplifier, decoder and streaming hub in one, and the Smart Libero have their own power amps on board. The TV and up to three further sources connect to the hub via HDMI, and each speaker just needs a power outlet within reach.\u003c\/p\u003e\n\u003ch3\u003eDo the Smart Libero also work with third-party equipment?\u003c\/h3\u003e\n\u003cp\u003eNo. The Smart Libero are purely wireless speakers within the Canton Smart system and need a master device such as the included Smart Connect 5.1 S2, a Canton Smart soundbar or a Smart Sounddeck. On any regular integrated amplifier or directly on a TV, they produce no sound at all.\u003c\/p\u003e\n\u003ch3\u003eCan I expand Set 2 to surround later?\u003c\/h3\u003e\n\u003cp\u003eYes. Two more Smart Libero give you the Set 4 configuration, and a Canton Smart Sub adds deep bass. The hub manages up to eight wireless Smart speakers, so you can expand in stages over the years without having to replace anything.\u003c\/p\u003e\n\u003ch3\u003eDo I need a paid streaming subscription?\u003c\/h3\u003e\n\u003cp\u003eNo. Streaming services are an option, not a requirement. TV sound runs via HDMI, plus there's AirPlay 2, Chromecast built-in, Spotify Connect and Bluetooth. Music from your phone, your home network or internet radio works without any ongoing cost.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Smart Libero Set 2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a Smart system lives or dies on the right combination and clean setup. HD Zürisee in Wädenswil matches the set to your room and TV, sets up sources and channels with you, and backs it all up with its own in-house technician. Give us a call or send a quick WhatsApp message.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore Smart Libero speakers, the matching Smart Sub and all other building blocks can be found in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e. For expanding towards home cinema, the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e are worth a look; an overview of all \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e and other ready-made combinations is available under \u003ca href=\"\/en-ch\/collections\/hifi-sets\"\u003eHiFi sets\u003c\/a\u003e too. We're happy to plan the next step with you.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53138531909968,"sku":null,"price":1073.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-set-2-streaming-set-schwarz-setansicht.png?v=1785869240"},{"product_id":"canton-smart-libero-set-2-streaming-set-weiss","title":"Canton Smart Libero Set 2 Streaming Set, White (Set)","description":"\u003cp\u003eThe Canton Smart Libero Set 2 is a wireless stereo and streaming set made up of the Smart Connect 5.1 S2 as the hub and two active Smart Libero speakers, connected wirelessly.\u003c\/p\u003e\n\u003cp\u003eIn white, this is the version for bright living spaces: two small cabinets measuring eleven by fifteen centimetres that barely stand out against a light wall, plus a flat hub under the TV. TV, player and games console connect in via HDMI, sound goes out by radio. There's no signal cable between the devices at all – power is all it takes.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Smart Libero Set 2?\u003c\/h2\u003e\n\u003cp\u003eBecause someone has already done the tinkering for you. Hub, speakers and remote are matched to each other, the speakers bring their own amplification, and when placing them you decide by looks rather than by cable routes. If you want more later, just plug in further Smart speakers: the hub manages up to eight wireless channels.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the set brings to everyday life\u003c\/h2\u003e\n\u003cp\u003eStereo that finally takes TV sound seriously – and music that doesn't sound like an afterthought. Each Smart Libero is a sealed two-way system with a 25 mm fabric tweeter, a 78 mm woofer\/midrange and 70 watts of system power; it can go on a wall bracket if you prefer. The hub selects sources, streams via AirPlay 2, Chromecast built-in and Spotify Connect, and handles Dolby Atmos as well as DTS-HD Master Audio as soon as you add the matching channels.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Set 2 for?\u003c\/h3\u003e\n\u003cp\u003eHonestly: for anyone who wants a tidy stereo system – no more, no less. There's no subwoofer, no rear channels either. If you want cinema impact from the first go, you're better off going straight for the Set 4 and planning in a Smart Sub. And because the Libero only work within the Canton Smart ecosystem, they're no substitute for bookshelf speakers on a regular amplifier. Describe your room to us, and we'll work it out together.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA complete package that leaves the effort where it belongs: with the manufacturer. Unbox, place two speakers, plug in HDMI, done. The white finish is the right choice when technology in the room should demand as little attention as possible.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet type: wireless 2.0 stereo and streaming set, expandable to surround\u003c\/li\u003e\n\u003cli\u003eHub: Canton Smart Connect 5.1 S2, wireless AV preamplifier and streaming hub\u003c\/li\u003e\n\u003cli\u003eChannels: 6 active channels plus up to 8 wireless Canton Smart speakers\u003c\/li\u003e\n\u003cli\u003eHDMI on the hub: 3× input (4K, 3D, HDR, HDCP 2.2, CEC), 1× output with eARC\u003c\/li\u003e\n\u003cli\u003eFurther hub connections: 1× stereo RCA input, 1× optical (Toslink), 2× coaxial, 6× RCA pre-out, LAN (RJ45), 1× USB-A (service only)\u003c\/li\u003e\n\u003cli\u003eAudio formats: Dolby Atmos, Dolby TrueHD, DTS-HD, DTS-HD Master Audio, PCM up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eNetwork and streaming: Wi-Fi 802.11 a\/b\/g\/n\/ac, AirPlay 2, Chromecast built-in, Spotify Connect, Bluetooth 4.1 (A2DP 1.2, AVRCP 1.3)\u003c\/li\u003e\n\u003cli\u003eWireless link: Canton Smart wireless connection between hub and speakers, no signal cable needed\u003c\/li\u003e\n\u003cli\u003eSpeakers: 2× Canton Smart Libero, active, 2-way sealed, each with a 25 mm fabric tweeter and 78 mm cellulose-graphite woofer\/midrange, 70 W system power, 40–23,000 Hz, crossover frequency 3,000 Hz, wall mounting possible\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Connect 5.1 S2 (W × H × D): 24.5 × 5.2 × 13.8 cm, 1.23 kg\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Libero per speaker (W × H × D): 11 × 15 × 8 cm, 0.7 kg\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1× Smart Connect 5.1 S2 with power cable and instructions, 2× Smart Libero each with a 1.5 m power cable and quick guide, 1× Canton Smart Remote Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich components belong to the Smart Libero Set 2?\u003c\/h3\u003e\n\u003cp\u003eTwo Smart Libero wireless speakers, a Smart Connect 5.1 S2 as the hub, and a Canton Smart Remote Control. The Libero handle the front left and right channels, the hub manages sources, network and volume. Subwoofer and rear speakers are not part of the set.\u003c\/p\u003e\n\u003ch3\u003eIs the Set 2 enough as a complete system for the TV?\u003c\/h3\u003e\n\u003cp\u003eYes, for stereo. The TV connects to the hub via HDMI, whose output supports eARC; there's room for three further HDMI sources. A separate AV receiver becomes unnecessary, since the Libero bring their own power amps and only need a power outlet.\u003c\/p\u003e\n\u003ch3\u003eCan I run the Smart Libero on a different amplifier?\u003c\/h3\u003e\n\u003cp\u003eNo. They can only be used as part of a Canton Smart system and need a master device – here the included Smart Connect 5.1 S2, or alternatively a Canton Smart soundbar or a Smart Sounddeck. On their own with third-party electronics, they stay silent.\u003c\/p\u003e\n\u003ch3\u003eCan Set 2 later become a home cinema?\u003c\/h3\u003e\n\u003cp\u003eYes. Two additional Smart Libero give you the Set 4 configuration, and a Canton Smart Sub adds deep bass. In total, the hub manages eight wireless Smart speakers, so the expansion can happen in stages over the years.\u003c\/p\u003e\n\u003ch3\u003eDo I have to subscribe to anything for the streaming features?\u003c\/h3\u003e\n\u003cp\u003eNo, a subscription is optional. AirPlay 2, Chromecast built-in, Spotify Connect and Bluetooth are all ready to go, but also work with music from your phone, your home network or internet radio. TV sound runs via the HDMI connection anyway.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Smart Libero Set 2 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a few decisions lie between the box and a finished system: placement, channel assignment, HDMI wiring. Our experienced team in Wädenswil supports that from practical experience, sets it up with you and comes to install it if needed. Get in touch by phone or WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eAdditional Smart Libero, the Smart Sub and the rest of the Smart family can be found in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e. If the next step is towards cinema, the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e will help. All \u003ca href=\"\/en-ch\/collections\/aktivlautsprecher\"\u003eactive speakers\u003c\/a\u003e and other ready-made combinations under \u003ca href=\"\/en-ch\/collections\/hifi-sets\"\u003eHiFi sets\u003c\/a\u003e are also available. Tell us where you want to go.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53138531942736,"sku":null,"price":1073.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-set-2-streaming-set-weiss-setansicht.png?v=1785869240"},{"product_id":"canton-smart-libero-set-4-surround-set-schwarz","title":"Canton Smart Libero Set 4 Surround Set, Black (Set)","description":"\u003cp\u003eThe Canton Smart Libero Set 4 is a wireless 4.0 surround set made up of the Smart Connect 5.1 S2 as the hub and four active Smart Libero speakers.\u003c\/p\u003e\n\u003cp\u003eFour compact speakers, a flat hub, not a single speaker cable running across the living room: the Smart Connect 5.1 S2 takes in the TV and up to three further sources via HDMI and distributes sound wirelessly to front left and right as well as rear left and right. The very part where home-cinema projects usually fail – the cables to the rears – is simply gone.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Smart Libero Set 4?\u003c\/h2\u003e\n\u003cp\u003eBecause it delivers real surround without anyone having to lift the carpet. All four Libero pair over the Canton Smart wireless link, and you decide in the speaker configuration which speaker takes which position. If the sofa moves, the rears just move with it – a power outlet within reach is all they need.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eRoom-filling sound from four active speakers, each with a 25 mm fabric tweeter, a 78 mm cellulose-graphite driver and 70 watts of system power. Films get effects that sit behind you instead of floating somewhere; music gets a wide, stable stage. Everything is controlled through the hub, which decodes Dolby Atmos, Dolby TrueHD and DTS-HD Master Audio and streams via AirPlay 2, Chromecast built-in and Spotify Connect.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Set 4 for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: for anyone who wants surround but no cable channels. Without a Smart Sub it stays a 4.0 with no dedicated deep bass – for full cinema impact you need one, which turns it into a 5.1. Height channels are also still missing; that would take two more Libero up top. And the Smart Libero only work within the Canton Smart ecosystem, not with third-party electronics. We'll tell you in advance whether 4.0 is enough for your room.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eWireless surround you actually set up rather than wire up: four discrete speakers, one hub, cleanly expandable. In black, the rears disappear against dark walls so well that guests only ask where the sound is coming from once the credits roll.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet type: wireless 4.0 surround set (5.1 with an additional Canton Smart Sub)\u003c\/li\u003e\n\u003cli\u003eHub: Canton Smart Connect 5.1 S2, wireless AV preamplifier and streaming hub\u003c\/li\u003e\n\u003cli\u003eChannels: 6 active channels plus up to 8 wireless Canton Smart speakers\u003c\/li\u003e\n\u003cli\u003eHDMI on the hub: 3× input (4K, 3D, HDR, HDCP 2.2, CEC), 1× output with eARC\u003c\/li\u003e\n\u003cli\u003eFurther hub connections: 1× stereo RCA input, 1× optical (Toslink), 2× coaxial, 6× RCA pre-out, LAN (RJ45), 1× USB-A (service only)\u003c\/li\u003e\n\u003cli\u003eAudio formats: Dolby Atmos, Dolby TrueHD, DTS-HD, DTS-HD Master Audio, PCM up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eNetwork and streaming: Wi-Fi 802.11 a\/b\/g\/n\/ac, AirPlay 2, Chromecast built-in, Spotify Connect, Bluetooth 4.1 (A2DP 1.2, AVRCP 1.3)\u003c\/li\u003e\n\u003cli\u003eWireless link: Canton Smart wireless connection between hub and speakers, no signal cable needed\u003c\/li\u003e\n\u003cli\u003eSpeakers: 4× Canton Smart Libero, active, 2-way sealed, each with a 25 mm fabric tweeter and 78 mm cellulose-graphite woofer\/midrange, 70 W system power, 40–23,000 Hz, crossover frequency 3,000 Hz, wall mounting possible\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Connect 5.1 S2 (W × H × D): 24.5 × 5.2 × 13.8 cm, 1.23 kg\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Libero per speaker (W × H × D): 11 × 15 × 8 cm, 0.7 kg\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1× Smart Connect 5.1 S2 with power cable and instructions, 4× Smart Libero each with a 1.5 m power cable and quick guide, 1× Canton Smart Remote Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's included in the Canton Smart Libero Set 4?\u003c\/h3\u003e\n\u003cp\u003eA Smart Connect 5.1 S2 as the hub, four active Smart Libero speakers and the Canton Smart Remote Control. Two Libero play up front, two behind as surround – together a wireless 4.0 system that can be expanded to 5.1 with a Canton Smart Sub.\u003c\/p\u003e\n\u003ch3\u003eDoes the Set 4 include a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eNo. The Set 4 is a 4.0 system without a subwoofer. For deep bass and a full 5.1, you pair a Canton Smart Sub wirelessly. Whether that's worth it for your room, or whether the four Libero are enough, we'll tell you honestly.\u003c\/p\u003e\n\u003ch3\u003eDo I need an additional AV receiver?\u003c\/h3\u003e\n\u003cp\u003eNo. The Smart Connect 5.1 S2 works as a wireless AV preamplifier with three HDMI inputs and one eARC output, and the four Smart Libero have their own power amps on board. Each speaker just needs a power outlet within reach; speaker cables are gone entirely.\u003c\/p\u003e\n\u003ch3\u003eHow are the four speakers connected?\u003c\/h3\u003e\n\u003cp\u003eWirelessly. You assign each speaker its position in the hub's speaker configuration, after which the wireless connection is established as soon as the power cable is plugged in. There's no audio cable between hub and speakers – only power is needed.\u003c\/p\u003e\n\u003ch3\u003eCan I use Dolby Atmos with the Set 4?\u003c\/h3\u003e\n\u003cp\u003eThe hub decodes Dolby Atmos and DTS-HD Master Audio, but with four Libero you're covering front and surround – height channels are still missing. Adding two more Libero on the wall or ceiling brings in the height layer. Up to eight wireless Smart speakers are possible.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Smart Libero Set 4 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause surround lives on placement and setup. HD Zürisee in Wädenswil matches the set to your room, sets up front, surround and sources with you, and backs it with its own in-house technician – including an honest recommendation on whether a Smart Sub belongs in the mix.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Smart Sub for the step up to 5.1 and further Smart building blocks can be found in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e, matching additions among the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e and the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e. All \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e and other ready-made combinations under \u003ca href=\"\/en-ch\/collections\/hifi-sets\"\u003eHiFi sets\u003c\/a\u003e are also available. We're happy to plan your wireless home cinema with you.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53138532303184,"sku":null,"price":1462.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-set-4-surround-set-schwarz-setansicht.png?v=1785869240"},{"product_id":"canton-smart-libero-set-4-surround-set-weiss","title":"Canton Smart Libero Set 4 Surround Set, White (Set)","description":"\u003cp\u003eThe Canton Smart Libero Set 4 is a wireless 4.0 surround set made up of the Smart Connect 5.1 S2 as the hub and four active Smart Libero speakers.\u003c\/p\u003e\n\u003cp\u003eIn white, the set is the discreet option: four small cabinets that nearly disappear against light walls, plus a 24.5 cm wide hub under the TV. The TV and up to three further sources come in via HDMI, sound goes out by radio – front left and right, and rear left and right.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Smart Libero Set 4?\u003c\/h2\u003e\n\u003cp\u003eBecause the most annoying part of a home cinema simply never arises here: the cables to the rear channels. Instead of opening up skirting boards, you place two speakers behind the sofa and assign their position at the hub. Wall mounting also works if you want the floor to stay clear. This system doesn't ask for any more configuration than that.\u003c\/p\u003e\n\n\u003ch2\u003eWhat the set brings to everyday life\u003c\/h2\u003e\n\u003cp\u003eFour active speakers, each with a 25 mm fabric tweeter, a 78 mm cellulose-graphite driver and 70 watts of system power, controlled by a hub that decodes Dolby Atmos, Dolby TrueHD and DTS-HD Master Audio. Series get atmosphere behind the seating position, concert recordings get a stage that reaches beyond the width of the TV. Music keeps running on the same system, via AirPlay 2, Chromecast built-in, Spotify Connect or Bluetooth – without you having to plug in anything different.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Set 4 for?\u003c\/h3\u003e\n\u003cp\u003eHonestly, for people who value all-round sound more than the last bit of deep bass – at least for now. A subwoofer isn't included, and neither are height channels; both can be added wirelessly later. And the Smart Libero only work within the Canton Smart ecosystem, not on a third-party amplifier. Hand on heart: if you don't want to tear up your living room, there's hardly a more relaxed way into surround.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA home cinema you set up rather than install. The white finish is the choice for bright rooms where four black boxes would stand out – and expanding to 5.1 or adding height channels remains an option at any time.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet type: wireless 4.0 surround set (5.1 with an additional Canton Smart Sub)\u003c\/li\u003e\n\u003cli\u003eHub: Canton Smart Connect 5.1 S2, wireless AV preamplifier and streaming hub\u003c\/li\u003e\n\u003cli\u003eChannels: 6 active channels plus up to 8 wireless Canton Smart speakers\u003c\/li\u003e\n\u003cli\u003eHDMI on the hub: 3× input (4K, 3D, HDR, HDCP 2.2, CEC), 1× output with eARC\u003c\/li\u003e\n\u003cli\u003eFurther hub connections: 1× stereo RCA input, 1× optical (Toslink), 2× coaxial, 6× RCA pre-out, LAN (RJ45), 1× USB-A (service only)\u003c\/li\u003e\n\u003cli\u003eAudio formats: Dolby Atmos, Dolby TrueHD, DTS-HD, DTS-HD Master Audio, PCM up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eNetwork and streaming: Wi-Fi 802.11 a\/b\/g\/n\/ac, AirPlay 2, Chromecast built-in, Spotify Connect, Bluetooth 4.1 (A2DP 1.2, AVRCP 1.3)\u003c\/li\u003e\n\u003cli\u003eWireless link: Canton Smart wireless connection between hub and speakers, no signal cable needed\u003c\/li\u003e\n\u003cli\u003eSpeakers: 4× Canton Smart Libero, active, 2-way sealed, each with a 25 mm fabric tweeter and 78 mm cellulose-graphite woofer\/midrange, 70 W system power, 40–23,000 Hz, crossover frequency 3,000 Hz, wall mounting possible\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Connect 5.1 S2 (W × H × D): 24.5 × 5.2 × 13.8 cm, 1.23 kg\u003c\/li\u003e\n\u003cli\u003eDimensions Smart Libero per speaker (W × H × D): 11 × 15 × 8 cm, 0.7 kg\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1× Smart Connect 5.1 S2 with power cable and instructions, 4× Smart Libero each with a 1.5 m power cable and quick guide, 1× Canton Smart Remote Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich components are inside the Smart Libero Set 4?\u003c\/h3\u003e\n\u003cp\u003eFour Smart Libero wireless speakers, a Smart Connect 5.1 S2 as the hub, and a Canton Smart Remote Control. Two Libero take the front channels, two the rear surround channels. Together that's a wireless 4.0 system; a subwoofer isn't included, but can be added wirelessly at any time.\u003c\/p\u003e\n\u003ch3\u003eDoes the bass get too thin without a subwoofer?\u003c\/h3\u003e\n\u003cp\u003eThe four Libero reach down to 40 Hz, which carries a normal living room surprisingly far. For explosions you feel in your stomach, though, there's no way around the Canton Smart Sub – that turns the 4.0 into a 5.1. We'll help you judge that for your room.\u003c\/p\u003e\n\u003ch3\u003eDoes the set manage without an AV receiver?\u003c\/h3\u003e\n\u003cp\u003eYes. The Smart Connect 5.1 S2 is both a wireless AV preamplifier and a streaming hub: three HDMI inputs, one output with eARC, plus optical, coaxial and analogue. Because each Smart Libero brings its own power amp, it only needs a power outlet.\u003c\/p\u003e\n\u003ch3\u003eHow does the sound reach the rear speakers?\u003c\/h3\u003e\n\u003cp\u003eBy radio. You assign each speaker its position in the hub's speaker configuration, and the connection then forms automatically as soon as the power cable is plugged in. There's no audio cable between hub and speakers – that saves you skirting boards and cable channels.\u003c\/p\u003e\n\u003ch3\u003eCan the Set 4 be expanded with height channels?\u003c\/h3\u003e\n\u003cp\u003eYes. The hub decodes Dolby Atmos and manages up to eight wireless Smart speakers. Two additional Smart Libero on the wall or ceiling add the height layer, a Smart Sub the foundation. The expansion can happen in stages.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Smart Libero Set 4 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause four speakers in a box don't yet make a home cinema: positions, channel assignment and levels decide the result. Our team in Wädenswil sets the system up with you, comes by for installation, and tells you honestly what you still need – and what you don't.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Canton Smart Sub and all other Smart components are waiting in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e. If you want to plan the deep bass in right away, check out the \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofers\u003c\/a\u003e; the \u003ca href=\"\/en-ch\/collections\/heimkino-lautsprecher\"\u003ehome cinema speakers\u003c\/a\u003e offer further channel ideas. All \u003ca href=\"\/en-ch\/collections\/aktivlautsprecher\"\u003eactive speakers\u003c\/a\u003e and other combinations under \u003ca href=\"\/en-ch\/collections\/hifi-sets\"\u003eHiFi sets\u003c\/a\u003e are also worth a look. Tell us about your room, we're happy to plan along.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53138532335952,"sku":null,"price":1462.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-smart-libero-set-4-surround-set-weiss-setansicht.png?v=1785869241"},{"product_id":"canton-gle-10-s2-on-wall-lautsprecher-schwarz-paar","title":"Canton GLE 10 S2 On-Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton GLE 10 S2 is an ultra-slim 2-way on-wall speaker from the GLE series with a closed cabinet, which can be mounted on the wall, on the ceiling, or placed on a shelf using the included feet.\u003c\/p\u003e\n\u003cp\u003eA 154mm ATB woofer\/midrange, a 25mm aluminium black tweeter with a large waveguide, and just 9 cm depth – the GLE 10 S2 brings clean Canton sound to places where a normal speaker simply doesn't fit. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 10 S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it refuses to be pinned down. At 9 cm deep, it all but disappears on the wall, yet thanks to the wave surround and ATB diaphragm, the 154mm driver sounds surprisingly mature. The closed cabinet needs no bass reflex tube, so it's forgiving in placement – no booming even mounted directly on a wall or ceiling. The tweeter with its large waveguide disperses broadly, which makes the GLE 10 S2 sound particularly even as a surround or ceiling speaker. And with the included feet, the wall speaker turns into a compact stereo pair for the shelf in no time.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eultra-slim 2-way cabinet, closed, only 9 cm deep\u003c\/li\u003e\n\u003cli\u003e154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter with large waveguide, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e45–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eflexible on wall, ceiling, or on a shelf using the feet\u003c\/li\u003e\n\u003cli\u003emagnetic fabric grille, banana-plug compatible terminal\u003c\/li\u003e\n\u003cli\u003esold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 10 S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 10 S2 is for anyone who wants good sound but has no room for classic speaker cabinets – as a discreet on-wall solution, as a surround or rear speaker, or as a ceiling speaker in a 3D\/Dolby Atmos setup. For deep, punchy stereo bass in a large living room it's too small; that calls for a bookshelf or floorstanding speaker and, if needed, a subwoofer. But as an unobtrusive, flexible all-rounder for wall and ceiling, it plays fully to its strengths.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 10 S2 is the Swiss Army knife of the GLE series: slim, flexible, and sounding above its size. At HD Zürisee in Wädenswil, we'll plan with you where it should go – as front, surround, or ceiling channel – and tune it to your set and your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 10 S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall and ceiling speaker (GLE series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, closed cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome with waveguide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e wall, ceiling, or placed using feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e screw terminal, banana-plug compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 30 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.0 kg per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e pair of GLE 10 S2 in black, feet, magnetic fabric grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Canton GLE 10 S2 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price is for two speakers – a complete pair. You get both cabinets with feet, magnetic fabric grilles, and instruction manual. That gives you a complete stereo or surround set right away, with no need to order twice.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the GLE 10 S2 on a wall and ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes. With just 9 cm depth and a closed cabinet, it's built for wall and ceiling mounting and won't boom even close to a wall. Alternatively, place it on a shelf or sideboard using the included feet. We're happy to help you work out the right mounting solution.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 10 S2 suitable for surround and Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. The broadly dispersing waveguide tweeter creates an even sound field – ideal as a rear speaker or, mounted on the ceiling, as a height channel in a Dolby Atmos setup. Sonically it blends seamlessly with the rest of the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 10 S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 45 Hz – fine and controlled thanks to the closed cabinet. For really deep bass in music or home cinema, it's best paired with a subwoofer. We'll tell you which one fits after a short consultation.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 10 S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a wall or ceiling speaker only shines with the right placement – and that's exactly where our experience helps. We know the GLE series from hands-on practice, plan mounting and setup with you, deliver your pair, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for a surround set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139251626320,"sku":null,"price":558.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-10-s2-on-wall-lautsprecher-schwarz-schraegansicht.png?v=1785865740"},{"product_id":"canton-gle-10-s2-on-wall-lautsprecher-weiss-paar","title":"Canton GLE 10 S2 On-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton GLE 10 S2 is an ultra-slim 2-way on-wall speaker from the GLE series with a closed cabinet, which can be mounted on the wall, on the ceiling, or placed on a shelf using the included feet.\u003c\/p\u003e\n\u003cp\u003eA 154mm ATB woofer\/midrange, a 25mm aluminium black tweeter with a large waveguide, and just 9 cm depth – the GLE 10 S2 brings clean Canton sound to places where a normal speaker simply doesn't fit. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 10 S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it refuses to be pinned down. At 9 cm deep, it all but disappears on the wall, yet thanks to the wave surround and ATB diaphragm, the 154mm driver sounds surprisingly mature. The closed cabinet needs no bass reflex tube, so it's forgiving in placement – no booming even mounted directly on a wall or ceiling. The tweeter with its large waveguide disperses broadly, which makes the GLE 10 S2 sound particularly even as a surround or ceiling speaker. And with the included feet, the wall speaker turns into a compact stereo pair for the shelf in no time.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eultra-slim 2-way cabinet, closed, only 9 cm deep\u003c\/li\u003e\n\u003cli\u003e154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter with large waveguide, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e45–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eflexible on wall, ceiling, or on a shelf using the feet\u003c\/li\u003e\n\u003cli\u003emagnetic fabric grille, banana-plug compatible terminal\u003c\/li\u003e\n\u003cli\u003esold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 10 S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 10 S2 is for anyone who wants good sound but has no room for classic speaker cabinets – as a discreet on-wall solution, as a surround or rear speaker, or as a ceiling speaker in a 3D\/Dolby Atmos setup. For deep, punchy stereo bass in a large living room it's too small; that calls for a bookshelf or floorstanding speaker and, if needed, a subwoofer. But as an unobtrusive, flexible all-rounder for wall and ceiling, it plays fully to its strengths.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 10 S2 is the Swiss Army knife of the GLE series: slim, flexible, and sounding above its size. At HD Zürisee in Wädenswil, we'll plan with you where it should go – as front, surround, or ceiling channel – and tune it to your set and your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 10 S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall and ceiling speaker (GLE series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, closed cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome with waveguide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e wall, ceiling, or placed using feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e screw terminal, banana-plug compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 30 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.0 kg per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e pair of GLE 10 S2 in white, feet, magnetic fabric grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the Canton GLE 10 S2 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price is for two speakers – a complete pair. You get both cabinets with feet, magnetic fabric grilles, and instruction manual. That gives you a complete stereo or surround set right away, with no need to order twice.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the GLE 10 S2 on a wall and ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes. With just 9 cm depth and a closed cabinet, it's built for wall and ceiling mounting and won't boom even close to a wall. Alternatively, place it on a shelf or sideboard using the included feet. We're happy to help you work out the right mounting solution.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 10 S2 suitable for surround and Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. The broadly dispersing waveguide tweeter creates an even sound field – ideal as a rear speaker or, mounted on the ceiling, as a height channel in a Dolby Atmos setup. Sonically it blends seamlessly with the rest of the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 10 S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 45 Hz – fine and controlled thanks to the closed cabinet. For really deep bass in music or home cinema, it's best paired with a subwoofer. We'll tell you which one fits after a short consultation.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 10 S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a wall or ceiling speaker only shines with the right placement – and that's exactly where our experience helps. We know the GLE series from hands-on practice, plan mounting and setup with you, deliver your pair, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for a surround set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139251659088,"sku":null,"price":558.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-10-s2-on-wall-lautsprecher-weiss-schraegansicht.png?v=1785865982"},{"product_id":"canton-gle-10-pro-s2-on-wall-lautsprecher-schwarz-paar","title":"Canton GLE 10 PRO S2 On-Wall Speaker, Black (Pair)","description":"\u003cp\u003eThe Canton GLE 10 PRO S2 is an ultra-slim 2-way on-wall speaker from the GLE series with a closed cabinet and an included universal swivel bracket, letting it be mounted precisely aimed on a wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eA 154mm ATB woofer\/midrange, a 25mm aluminium black tweeter with a large waveguide, and just 9 cm depth – the GLE 10 PRO S2 brings clean Canton sound to places where a normal speaker doesn't fit, and thanks to the swivel mount, aims it precisely at your listening position. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 10 PRO S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it aims the sound exactly where you sit. The heart is the same as in the GLE 10 S2 – a 154mm ATB driver with wave surround, waveguide tweeter, closed cabinet only 9 cm deep – but instead of feet, it comes with a universal swivel bracket. That lets you aim it on the wall or ceiling precisely at your listening position, panning and tilting as needed. The closed principle remains forgiving in placement and won't boom even close to a wall. It's precisely this targeted aiming that makes the PRO the ideal surround or Dolby Atmos speaker when the angle has to be right.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eultra-slim 2-way cabinet, closed, only 9 cm deep\u003c\/li\u003e\n\u003cli\u003eincluded universal swivel bracket for aimed wall and ceiling mounting\u003c\/li\u003e\n\u003cli\u003e154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter with large waveguide, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e45–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eswivels and tilts – aims the sound exactly at the listening position\u003c\/li\u003e\n\u003cli\u003emagnetic fabric grille, banana-plug compatible terminal\u003c\/li\u003e\n\u003cli\u003esold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 10 PRO S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 10 PRO S2 is for anyone who wants to aim their wall or ceiling speakers precisely – as surround or rear channels, or, swivelled onto the ceiling, as height channels in a Dolby Atmos setup. The swivel bracket is worth its weight in gold exactly when the speaker needs to play at an angle onto the sofa rather than head-on. If you just want to place it on a shelf, the regular GLE 10 S2 with its feet is the more affordable choice. For deep stereo bass in a large room you'll need larger speakers and a subwoofer anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 10 PRO S2 is the GLE 10 S2 for the demanding: same good sound, but with the freedom to aim it perfectly. For surround and Atmos, where the dispersion angle decides everything, that's the crucial difference. At HD Zürisee in Wädenswil, we'll plan positions and angles with you and tune the set to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 10 PRO S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall and ceiling speaker with swivel bracket (GLE series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, closed cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome with waveguide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e universal swivel bracket for wall and ceiling, pan and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e screw terminal, banana-plug compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 30 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 kg per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e pair of GLE 10 PRO S2 in black, universal swivel bracket, magnetic fabric grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the GLE 10 PRO S2 and the GLE 10 S2?\u003c\/h3\u003e\n\u003cp\u003eThe speaker itself is identical – same driver, same closed cabinet, same sound. The difference is in what's included: the PRO comes with a universal swivel bracket that lets you aim it precisely on a wall or ceiling. The regular GLE 10 S2 comes with feet for a shelf instead.\u003c\/p\u003e\n\u003ch3\u003eIs the Canton GLE 10 PRO S2 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price is for two speakers – a complete pair including two swivel brackets, magnetic fabric grilles, and instruction manual. That gives you a complete surround or stereo set right away, with no need to order twice.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 10 PRO S2 suitable for Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. Precisely because the swivel bracket lets you tilt it on the ceiling exactly onto the listening position, it's an ideal height channel in a Dolby Atmos setup. It also plays to its strength as an aimed surround speaker on the wall. Sonically it blends seamlessly with the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eDoes the GLE 10 PRO S2 boom on the wall?\u003c\/h3\u003e\n\u003cp\u003eNo. The closed cabinet needs no bass reflex tube and is therefore forgiving close to walls and ceilings. At only 9 cm depth, it barely stands out. For really deep bass, it's best paired with a subwoofer – we're happy to recommend one.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 10 PRO S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an aimable wall or ceiling speaker only shines with the right angle – and that's exactly where our experience helps. We know the GLE series from hands-on practice, plan positions, angles, and setup with you, deliver your pair, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for a surround set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139347079504,"sku":null,"price":618.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-10-pro-s2-on-wall-lautsprecher-schwarz-schraegansicht.png?v=1785866175"},{"product_id":"canton-gle-10-pro-s2-on-wall-lautsprecher-weiss-paar","title":"Canton GLE 10 PRO S2 On-Wall Speaker, White (Pair)","description":"\u003cp\u003eThe Canton GLE 10 PRO S2 is an ultra-slim 2-way on-wall speaker from the GLE series with a closed cabinet and an included universal swivel bracket, letting it be mounted precisely aimed on a wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eA 154mm ATB woofer\/midrange, a 25mm aluminium black tweeter with a large waveguide, and just 9 cm depth – the GLE 10 PRO S2 brings clean Canton sound to places where a normal speaker doesn't fit, and thanks to the swivel mount, aims it precisely at your listening position. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 10 PRO S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it aims the sound exactly where you sit. The heart is the same as in the GLE 10 S2 – a 154mm ATB driver with wave surround, waveguide tweeter, closed cabinet only 9 cm deep – but instead of feet, it comes with a universal swivel bracket. That lets you aim it on the wall or ceiling precisely at your listening position, panning and tilting as needed. The closed principle remains forgiving in placement and won't boom even close to a wall. It's precisely this targeted aiming that makes the PRO the ideal surround or Dolby Atmos speaker when the angle has to be right.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eultra-slim 2-way cabinet, closed, only 9 cm deep\u003c\/li\u003e\n\u003cli\u003eincluded universal swivel bracket for aimed wall and ceiling mounting\u003c\/li\u003e\n\u003cli\u003e154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter with large waveguide, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e45–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003eswivels and tilts – aims the sound exactly at the listening position\u003c\/li\u003e\n\u003cli\u003emagnetic fabric grille, banana-plug compatible terminal\u003c\/li\u003e\n\u003cli\u003esold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 10 PRO S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 10 PRO S2 is for anyone who wants to aim their wall or ceiling speakers precisely – as surround or rear channels, or, swivelled onto the ceiling, as height channels in a Dolby Atmos setup. The swivel bracket is worth its weight in gold exactly when the speaker needs to play at an angle onto the sofa rather than head-on. If you just want to place it on a shelf, the regular GLE 10 S2 with its feet is the more affordable choice. For deep stereo bass in a large room you'll need larger speakers and a subwoofer anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 10 PRO S2 is the GLE 10 S2 for the demanding: same good sound, but with the freedom to aim it perfectly. For surround and Atmos, where the dispersion angle decides everything, that's the crucial difference. At HD Zürisee in Wädenswil, we'll plan positions and angles with you and tune the set to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 10 PRO S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall and ceiling speaker with swivel bracket (GLE series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way, closed cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome with waveguide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,200 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 100 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e universal swivel bracket for wall and ceiling, pan and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e screw terminal, banana-plug compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 30 × 9 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.4 kg per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e pair of GLE 10 PRO S2 in white, universal swivel bracket, magnetic fabric grilles, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the GLE 10 PRO S2 and the GLE 10 S2?\u003c\/h3\u003e\n\u003cp\u003eThe speaker itself is identical – same driver, same closed cabinet, same sound. The difference is in what's included: the PRO comes with a universal swivel bracket that lets you aim it precisely on a wall or ceiling. The regular GLE 10 S2 comes with feet for a shelf instead.\u003c\/p\u003e\n\u003ch3\u003eIs the Canton GLE 10 PRO S2 sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the listed price is for two speakers – a complete pair including two swivel brackets, magnetic fabric grilles, and instruction manual. That gives you a complete surround or stereo set right away, with no need to order twice.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 10 PRO S2 suitable for Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. Precisely because the swivel bracket lets you tilt it on the ceiling exactly onto the listening position, it's an ideal height channel in a Dolby Atmos setup. It also plays to its strength as an aimed surround speaker on the wall. Sonically it blends seamlessly with the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eDoes the GLE 10 PRO S2 boom on the wall?\u003c\/h3\u003e\n\u003cp\u003eNo. The closed cabinet needs no bass reflex tube and is therefore forgiving close to walls and ceilings. At only 9 cm depth, it barely stands out. For really deep bass, it's best paired with a subwoofer – we're happy to recommend one.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 10 PRO S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an aimable wall or ceiling speaker only shines with the right angle – and that's exactly where our experience helps. We know the GLE series from hands-on practice, plan positions, angles, and setup with you, deliver your pair, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for a surround set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139347112272,"sku":null,"price":618.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-10-pro-s2-on-wall-lautsprecher-weiss-schraegansicht.png?v=1785866174"},{"product_id":"canton-gle-15-onwall-s2-wandlautsprecher-schwarz","title":"Canton GLE 15 OnWall S2 Wall Speaker, Black (Unit)","description":"\u003cp\u003eThe Canton GLE 15 OnWall S2 is a slim 2-way on-wall speaker from the GLE S2 series with a bass reflex cabinet and two woofer\/midrange drivers, sold individually and made for wall mounting.\u003c\/p\u003e\n\u003cp\u003eTwo 154mm ATB woofer\/midrange drivers, a 25mm aluminium black tweeter, and just 8 cm depth – the GLE 15 OnWall S2 brings rich Canton sound to the wall, without a bulky floorstanding cabinet. Sold as a single unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 15 OnWall S2?\u003c\/h2\u003e\n\u003cp\u003eBecause despite a slim 8 cm depth, it works with two 154mm ATB drivers instead of just one – more diaphragm area for cleaner bass and more headroom than you'd expect from such a slim cabinet. The 25mm tweeter delivers fine, relaxed highs up to 40,000 Hz, and the bass reflex principle with a passive radiator extracts solid depth despite the slim cabinet. And because it's sold individually, you build your set freely: two as a stereo front, three for a slim LCR front under the TV, or a single unit as a surround channel.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eslim 2-way bass reflex cabinet with passive radiator, only 8 cm deep\u003c\/li\u003e\n\u003cli\u003e2× 154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e43–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003esold individually – freely combinable for front, LCR, or surround\u003c\/li\u003e\n\u003cli\u003eprepared for wall mounting, magnetic fabric grille\u003c\/li\u003e\n\u003cli\u003esold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 15 OnWall S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 15 OnWall S2 is for anyone who wants a slim wall solution without giving up powerful dual-driver bass – as a wall front, LCR addition, or surround channel. If the speaker needs to be aimed at an angle on a wall or ceiling, say as an Atmos height channel, the GLE 15 PRO S2 with its universal bracket is the better fit. For deep, room-filling stereo bass in a large living room, larger speakers and a subwoofer are needed anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 15 OnWall S2 is the slim wall solution in the GLE S2 series with surprisingly strong bass for its slim cabinet – plannable individually and therefore ideal for tailor-made setups. At HD Zürisee in Wädenswil, we'll plan with you how many you need and where they go, and tune the whole thing to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 15 OnWall S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall speaker (GLE S2 series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way bass reflex with passive radiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 2× 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 43–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e prepared for wall mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 52 × 8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e Canton GLE 15 OnWall S2 in black (single unit), oval fabric grille (black), instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the GLE 15 OnWall S2 sold individually or as a pair?\u003c\/h3\u003e\n\u003cp\u003eIndividually – the listed price is per unit. That's intentional: it lets you build exactly the configuration you need, whether a stereo pair, an LCR front, or a surround expansion. We're happy to advise on how many units make sense for your set.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 15 OnWall S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 43 Hz, thanks to two 154mm woofer\/midrange drivers offering plenty of diaphragm area for such a slim cabinet. The bass reflex principle with a passive radiator extracts additional depth, without the wall mounting becoming a disadvantage. For the final bit of deep bass in home cinema, a subwoofer rounds things out – we're happy to recommend one.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the GLE 15 OnWall S2 on a wall?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what it's made for. The slim bass reflex cabinet barely stands out at just 8 cm deep and fits discreetly into any living room. We'll work out the right mounting and cabling solution with you, so it looks clean and sounds great in the end.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the GLE 15 OnWall S2 and the GLE 15 PRO S2?\u003c\/h3\u003e\n\u003cp\u003eAcoustically, nothing: both use the same two 154mm ATB drivers, the same tweeter, and the same bass reflex cabinet. The difference is in mounting – the PRO comes with a universal bracket for wall and ceiling, while the standard OnWall S2 is only prepared for flat wall mounting.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 15 OnWall S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a wall speaker only shines with proper planning – quantity, position, mounting, and tuning to the set. That's exactly where our experience helps. We know the GLE S2 series from hands-on practice, deliver you the right quantity, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for the complete set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139881034064,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-15-onwall-s2-wandlautsprecher-schwarz-schraegansicht.png?v=1785865596"},{"product_id":"canton-gle-15-onwall-s2-wandlautsprecher-weiss","title":"Canton GLE 15 OnWall S2 Wall Speaker, White (Unit)","description":"\u003cp\u003eThe Canton GLE 15 OnWall S2 is a slim 2-way on-wall speaker from the GLE S2 series with a bass reflex cabinet and two woofer\/midrange drivers, sold individually and made for wall mounting.\u003c\/p\u003e\n\u003cp\u003eTwo 154mm ATB woofer\/midrange drivers, a 25mm aluminium black tweeter, and just 8 cm depth – the GLE 15 OnWall S2 brings rich Canton sound to the wall, without a bulky floorstanding cabinet. Sold as a single unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 15 OnWall S2?\u003c\/h2\u003e\n\u003cp\u003eBecause despite a slim 8 cm depth, it works with two 154mm ATB drivers instead of just one – more diaphragm area for cleaner bass and more headroom than you'd expect from such a slim cabinet. The 25mm tweeter delivers fine, relaxed highs up to 40,000 Hz, and the bass reflex principle with a passive radiator extracts solid depth despite the slim cabinet. And because it's sold individually, you build your set freely: two as a stereo front, three for a slim LCR front under the TV, or a single unit as a surround channel.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eslim 2-way bass reflex cabinet with passive radiator, only 8 cm deep\u003c\/li\u003e\n\u003cli\u003e2× 154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e43–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003esold individually – freely combinable for front, LCR, or surround\u003c\/li\u003e\n\u003cli\u003eprepared for wall mounting, magnetic fabric grille\u003c\/li\u003e\n\u003cli\u003esold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 15 OnWall S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 15 OnWall S2 is for anyone who wants a slim wall solution without giving up powerful dual-driver bass – as a wall front, LCR addition, or surround channel. If the speaker needs to be aimed at an angle on a wall or ceiling, say as an Atmos height channel, the GLE 15 PRO S2 with its universal bracket is the better fit. For deep, room-filling stereo bass in a large living room, larger speakers and a subwoofer are needed anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 15 OnWall S2 is the slim wall solution in the GLE S2 series with surprisingly strong bass for its slim cabinet – plannable individually and therefore ideal for tailor-made setups. At HD Zürisee in Wädenswil, we'll plan with you how many you need and where they go, and tune the whole thing to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 15 OnWall S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall speaker (GLE S2 series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way bass reflex with passive radiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 2× 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 43–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e prepared for wall mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 52 × 8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e Canton GLE 15 OnWall S2 in white (single unit), oval fabric grille (black), instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the GLE 15 OnWall S2 sold individually or as a pair?\u003c\/h3\u003e\n\u003cp\u003eIndividually – the listed price is per unit. That's intentional: it lets you build exactly the configuration you need, whether a stereo pair, an LCR front, or a surround expansion. We're happy to advise on how many units make sense for your set.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 15 OnWall S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 43 Hz, thanks to two 154mm woofer\/midrange drivers offering plenty of diaphragm area for such a slim cabinet. The bass reflex principle with a passive radiator extracts additional depth, without the wall mounting becoming a disadvantage. For the final bit of deep bass in home cinema, a subwoofer rounds things out – we're happy to recommend one.\u003c\/p\u003e\n\u003ch3\u003eCan I mount the GLE 15 OnWall S2 on a wall?\u003c\/h3\u003e\n\u003cp\u003eYes, that's what it's made for. The slim bass reflex cabinet barely stands out at just 8 cm deep and fits discreetly into any living room. We'll work out the right mounting and cabling solution with you, so it looks clean and sounds great in the end.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the GLE 15 OnWall S2 and the GLE 15 PRO S2?\u003c\/h3\u003e\n\u003cp\u003eAcoustically, nothing: both use the same two 154mm ATB drivers, the same tweeter, and the same bass reflex cabinet. The difference is in mounting – the PRO comes with a universal bracket for wall and ceiling, while the standard OnWall S2 is only prepared for flat wall mounting.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 15 OnWall S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a wall speaker only shines with proper planning – quantity, position, mounting, and tuning to the set. That's exactly where our experience helps. We know the GLE S2 series from hands-on practice, deliver you the right quantity, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for the complete set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139881066832,"sku":null,"price":419.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-15-onwall-s2-wandlautsprecher-weiss-schraegansicht.png?v=1785865596"},{"product_id":"canton-gle-15-pro-s2-wandlautsprecher-schwarz","title":"Canton GLE 15 PRO S2 Wall Speaker, Black (Unit)","description":"\u003cp\u003eThe Canton GLE 15 PRO S2 is a slim 2-way on-wall speaker from the GLE S2 series with a bass reflex cabinet, two woofer\/midrange drivers, and an included universal bracket, letting it be mounted precisely aimed on a wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eTwo 154mm ATB woofer\/midrange drivers, a 25mm aluminium black tweeter, and just 8 cm depth – the GLE 15 PRO S2 brings rich Canton sound to the wall or ceiling, panned exactly onto your listening position. Sold as a single unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 15 PRO S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it aims the sound exactly where you sit. The acoustic core is the same as in the GLE 15 OnWall S2 – two 154mm ATB drivers, a bass reflex cabinet with a passive radiator, a 25mm tweeter – but instead of simple wall preparation, it comes with a universal bracket. That lets you aim it precisely at your listening position on a wall or ceiling, and use it, tilted, as a height channel in a Dolby Atmos setup. And because it's sold individually, you plan your set freely – two as a stereo front, several as Atmos channels on the ceiling, or as surround.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eslim 2-way bass reflex cabinet with passive radiator, only 8 cm deep\u003c\/li\u003e\n\u003cli\u003eincluded universal bracket for aimed wall and ceiling mounting\u003c\/li\u003e\n\u003cli\u003e2× 154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e43–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003eswivels and tilts – ideal also as a ceiling channel\u003c\/li\u003e\n\u003cli\u003esold individually – freely combinable for front, LCR, surround, or Atmos\u003c\/li\u003e\n\u003cli\u003esold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 15 PRO S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 15 PRO S2 is for anyone who wants to aim their slim wall or ceiling speaker precisely – as an Atmos height channel on the ceiling or as an angled surround on the wall. If the classic, flat wall mounting is enough for you, the more affordable GLE 15 OnWall S2 is the right choice – acoustically identical, just without the swivel bracket. For deep stereo bass in a large room you'll need larger speakers and a subwoofer anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 15 PRO S2 is the GLE 15 OnWall S2 for every case where the dispersion angle matters: same sound, but freely aimable on wall and ceiling. At HD Zürisee in Wädenswil, we'll plan positions and angles with you and tune the set to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 15 PRO S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall speaker with swivel bracket (GLE S2 series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way bass reflex with passive radiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 2× 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 43–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e universal bracket for wall and ceiling, pan and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 52 × 8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e Canton GLE 15 PRO S2 in black (single unit), universal bracket, oval fabric grille (black), instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the GLE 15 PRO S2 and the GLE 15 OnWall S2?\u003c\/h3\u003e\n\u003cp\u003eAcoustically, nothing: same two 154mm ATB drivers, same tweeter, same bass reflex cabinet. The difference is in what's included – the PRO comes with a universal bracket that lets you aim it precisely on a wall or ceiling. The standard OnWall S2 is only prepared for flat wall mounting.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 15 PRO S2 sold individually or as a pair?\u003c\/h3\u003e\n\u003cp\u003eIndividually – the price is per unit. That lets you build exactly the configuration you need, whether a stereo pair, an LCR front, or a surround or Atmos expansion. We're happy to advise on how many units make sense after a short consultation.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 15 PRO S2 suitable for Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. Thanks to the swivel bracket, you can mount it on the ceiling tilted exactly onto the listening position – ideal as a height channel in a Dolby Atmos setup. It also plays to its strength as an aimed surround speaker on the wall. Sonically it blends seamlessly with the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 15 PRO S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 43 Hz, thanks to two 154mm woofer\/midrange drivers and a bass reflex cabinet with a passive radiator. For truly deep cinema bass, a subwoofer rounds out the picture perfectly. We're happy to help you work out which one fits your room.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 15 PRO S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an aimable wall or ceiling speaker only shines with the right angle – and that's exactly where our experience helps. We know the GLE S2 series from hands-on practice, plan positions and angles with you, deliver your unit, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for the complete set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139881099600,"sku":null,"price":469.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-15-pro-s2-wandlautsprecher-schwarz-schraegansicht.png?v=1785865596"},{"product_id":"canton-gle-15-pro-s2-wandlautsprecher-weiss","title":"Canton GLE 15 PRO S2 Wall Speaker, White (Unit)","description":"\u003cp\u003eThe Canton GLE 15 PRO S2 is a slim 2-way on-wall speaker from the GLE S2 series with a bass reflex cabinet, two woofer\/midrange drivers, and an included universal bracket, letting it be mounted precisely aimed on a wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eTwo 154mm ATB woofer\/midrange drivers, a 25mm aluminium black tweeter, and just 8 cm depth – the GLE 15 PRO S2 brings rich Canton sound to the wall or ceiling, panned exactly onto your listening position. Sold as a single unit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Canton GLE 15 PRO S2?\u003c\/h2\u003e\n\u003cp\u003eBecause it aims the sound exactly where you sit. The acoustic core is the same as in the GLE 15 OnWall S2 – two 154mm ATB drivers, a bass reflex cabinet with a passive radiator, a 25mm tweeter – but instead of simple wall preparation, it comes with a universal bracket. That lets you aim it precisely at your listening position on a wall or ceiling, and use it, tilted, as a height channel in a Dolby Atmos setup. And because it's sold individually, you plan your set freely – two as a stereo front, several as Atmos channels on the ceiling, or as surround.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eslim 2-way bass reflex cabinet with passive radiator, only 8 cm deep\u003c\/li\u003e\n\u003cli\u003eincluded universal bracket for aimed wall and ceiling mounting\u003c\/li\u003e\n\u003cli\u003e2× 154mm ATB woofer\/midrange with wave surround\u003c\/li\u003e\n\u003cli\u003e25mm aluminium black tweeter, highs up to 40,000 Hz\u003c\/li\u003e\n\u003cli\u003e43–40,000 Hz, 86 dB efficiency, impedance 4–8 Ω\u003c\/li\u003e\n\u003cli\u003eRated\/music power handling 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003eswivels and tilts – ideal also as a ceiling channel\u003c\/li\u003e\n\u003cli\u003esold individually – freely combinable for front, LCR, surround, or Atmos\u003c\/li\u003e\n\u003cli\u003esold as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Canton GLE 15 PRO S2 for?\u003c\/h3\u003e\n\u003cp\u003ePlain and simple: the GLE 15 PRO S2 is for anyone who wants to aim their slim wall or ceiling speaker precisely – as an Atmos height channel on the ceiling or as an angled surround on the wall. If the classic, flat wall mounting is enough for you, the more affordable GLE 15 OnWall S2 is the right choice – acoustically identical, just without the swivel bracket. For deep stereo bass in a large room you'll need larger speakers and a subwoofer anyway.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe GLE 15 PRO S2 is the GLE 15 OnWall S2 for every case where the dispersion angle matters: same sound, but freely aimable on wall and ceiling. At HD Zürisee in Wädenswil, we'll plan positions and angles with you and tune the set to your room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data – Canton GLE 15 PRO S2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e on-wall \/ wall speaker with swivel bracket (GLE S2 series)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic principle:\u003c\/strong\u003e 2-way bass reflex with passive radiator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer\/midrange:\u003c\/strong\u003e 2× 154 mm Aluminium Titan Black (ATB), wave surround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 25 mm aluminium black dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 43–40,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3,000 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency (2.83 V\/1 m):\u003c\/strong\u003e 86 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated\/music power handling:\u003c\/strong\u003e 60 \/ 110 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 4–8 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e universal bracket for wall and ceiling, pan and tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white (decor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 17 × 52 × 8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.0 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e Canton GLE 15 PRO S2 in white (single unit), universal bracket, oval fabric grille (black), instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the GLE 15 PRO S2 and the GLE 15 OnWall S2?\u003c\/h3\u003e\n\u003cp\u003eAcoustically, nothing: same two 154mm ATB drivers, same tweeter, same bass reflex cabinet. The difference is in what's included – the PRO comes with a universal bracket that lets you aim it precisely on a wall or ceiling. The standard OnWall S2 is only prepared for flat wall mounting.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 15 PRO S2 sold individually or as a pair?\u003c\/h3\u003e\n\u003cp\u003eIndividually – the price is per unit. That lets you build exactly the configuration you need, whether a stereo pair, an LCR front, or a surround or Atmos expansion. We're happy to advise on how many units make sense after a short consultation.\u003c\/p\u003e\n\u003ch3\u003eIs the GLE 15 PRO S2 suitable for Dolby Atmos?\u003c\/h3\u003e\n\u003cp\u003eVery much so. Thanks to the swivel bracket, you can mount it on the ceiling tilted exactly onto the listening position – ideal as a height channel in a Dolby Atmos setup. It also plays to its strength as an aimed surround speaker on the wall. Sonically it blends seamlessly with the GLE S2 series.\u003c\/p\u003e\n\u003ch3\u003eHow deep does the GLE 15 PRO S2 play?\u003c\/h3\u003e\n\u003cp\u003eDown to 43 Hz, thanks to two 154mm woofer\/midrange drivers and a bass reflex cabinet with a passive radiator. For truly deep cinema bass, a subwoofer rounds out the picture perfectly. We're happy to help you work out which one fits your room.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton GLE 15 PRO S2 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause an aimable wall or ceiling speaker only shines with the right angle – and that's exactly where our experience helps. We know the GLE S2 series from hands-on practice, plan positions and angles with you, deliver your unit, and remain on hand for installation and service with our own in-house technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/subwoofer\"\u003esubwoofer\u003c\/a\u003e as the foundation, or further \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e for the complete set.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53139902038352,"sku":null,"price":469.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/canton-gle-15-pro-s2-wandlautsprecher-weiss-schraegansicht.png?v=1785865596"}],"url":"https:\/\/hdzuerisee.ch\/en-ch\/collections\/wandlautsprecher.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}