{"title":"Phono Cable","description":"\u003cp\u003eA phono cable connects the tonearm, or the turntable, to the phono stage and carries the extremely small signal from the cartridge.\u003c\/p\u003e\n\n\u003ch2\u003eWhy a good phono cable?\u003c\/h2\u003e\n\u003cp\u003eThe phono signal is the most sensitive in the whole chain – tiny in level and therefore prone to hum and interference. A phono cable is therefore especially well shielded and usually carries a separate ground wire to avoid ground loops. With MM cartridges, the cable's capacitance also plays an audible role. In short: here the cable is not an afterthought, but part of the tuning.\u003c\/p\u003e\n\n\u003ch2\u003eWhat matters\u003c\/h2\u003e\n\u003cp\u003eWhat matters is very good shielding, a working ground connection and, with MM cartridges, a capacitance that matches the phono stage. At HD Zürisee in Wädenswil we look at cartridge, tonearm and phono stage together and choose the phono cable to match, both sonically and electrically. Especially with vinyl, it's the interplay of the components that decides – not the most expensive single part.\u003c\/p\u003e\n\n\u003ch2\u003eWho it's for – and straight talk\u003c\/h2\u003e\n\u003cp\u003eFor anyone serious about listening to vinyl – from a solid entry-level turntable to a high-end deck with a separate tonearm cable and external phono stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e with a phono cable, technique comes first: shielding, grounding, and with MM the capacitance. If these basics are right, vinyl plays quietly and hum-free. Only then comes the fine-tuning. We make sure the technical fit is right first and tell you honestly where the audible difference actually lies.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVerdict:\u003c\/strong\u003e very good shielding, clean grounding, matching capacitance – then your record plays quietly and cleanly. Tell us your cartridge and your phono stage, and we'll find the right cable.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy does phono need a special cable?\u003c\/h3\u003e\n\u003cp\u003eBecause the cartridge's signal is extremely small and therefore prone to interference. A phono cable is especially well shielded and usually carries a ground wire to avoid hum. A normal line cable isn't designed for this.\u003c\/p\u003e\n\u003ch3\u003eWhat is the ground wire on a phono cable for?\u003c\/h3\u003e\n\u003cp\u003eIt connects the turntable to the ground of the phono stage and thus prevents ground loops. If this connection is missing or sits loosely, hum is often clearly audible. We'll show you how to connect the ground correctly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the deal with capacitance on MM cartridges?\u003c\/h3\u003e\n\u003cp\u003eMM cartridges respond to the total capacitance of cable and phono input – it audibly affects the treble response. That's why the cable should match your cartridge's recommended capacitance. With MC cartridges this is less critical. We clarify this based on your cartridge.\u003c\/p\u003e\n\u003ch3\u003eHow long can a phono cable be?\u003c\/h3\u003e\n\u003cp\u003eBecause of the tiny signal, the rule is: as short as sensibly possible. Shorter runs keep interference, and with MM the capacitance, in check. More important than maximum length is clean shielding and grounding. We recommend a suitable length for your setup.\u003c\/p\u003e\n\u003ch3\u003eCan I use a normal RCA cable for phono?\u003c\/h3\u003e\n\u003cp\u003eWe'd advise against it. Without sufficient shielding, grounding and matching capacitance, you easily end up with hum or an altered sound. For phono, a dedicated cable is worthwhile. We'll tell you what matches your system.\u003c\/p\u003e\n\u003ch3\u003eWhy buy a phono cable at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we understand vinyl as a system and consider cartridge, tonearm and phono stage together, instead of just selling a cable. That way the connection fits both electrically and sonically. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why does phono need a special cable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because the cartridge's signal is extremely small and therefore prone to interference. A phono cable is especially well shielded and usually carries a ground wire to avoid hum. A normal line cable isn't designed for this.\"}},{\"@type\":\"Question\",\"name\":\"What is the ground wire on a phono cable for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It connects the turntable to the ground of the phono stage and thus prevents ground loops. If this connection is missing or sits loosely, hum is often clearly audible. We'll show you how to connect the ground correctly.\"}},{\"@type\":\"Question\",\"name\":\"What's the deal with capacitance on MM cartridges?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"MM cartridges respond to the total capacitance of cable and phono input – it audibly affects the treble response. That's why the cable should match your cartridge's recommended capacitance. With MC cartridges this is less critical. We clarify this based on your cartridge.\"}},{\"@type\":\"Question\",\"name\":\"How long can a phono cable be?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because of the tiny signal, the rule is: as short as sensibly possible. Shorter runs keep interference, and with MM the capacitance, in check. More important than maximum length is clean shielding and grounding. We recommend a suitable length for your setup.\"}},{\"@type\":\"Question\",\"name\":\"Can I use a normal RCA cable for phono?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We'd advise against it. Without sufficient shielding, grounding and matching capacitance, you easily end up with hum or an altered sound. For phono, a dedicated cable is worthwhile. We'll tell you what matches your system.\"}},{\"@type\":\"Question\",\"name\":\"Why buy a phono cable at HD Zürisee?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because we understand vinyl as a system and consider cartridge, tonearm and phono stage together, instead of just selling a cable. That way the connection fits both electrically and sonically. We advise you personally and deliver throughout Switzerland – free shipping from CHF 190.\"}}]}\u003c\/script\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ch\/collections\/cinchkabel\"\u003eRCA Cables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ch\/collections\/kabel\"\u003eAll Cables \u0026amp; Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"viablue-nf-s5-phono-tonarmkabel","title":"ViaBlue NF-S5 Phono \u0026 Tonearm Cable","description":"\u003ch3\u003eViaBlue NF-S5 Phono \u0026amp; Tonearm Cable\u003c\/h3\u003e\u003cp\u003eMade specifically for the turntable: the NF-S5 is available as a classic Cinch-to-Cinch phono cable or with a solid 5-pin DIN connector (SME) to Cinch – the clean, shielded connection from the tonearm to the phono stage. Ready-made with T8 technology, so your vinyl arrives without hum or losses.\u003c\/p\u003e\u003cp\u003eChoose the version and length to match your turntable.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhich version do I need – DIN or Cinch?\u003c\/h3\u003e\u003cp\u003eThat depends on the tonearm. If your turntable has a five-pin DIN socket on the tonearm base, go for the 5-pin DIN to Cinch version. If two Cinch sockets already come out of the turntable, Cinch to Cinch is the right choice. If in doubt, send us a photo of the connection and we'll sort it out.\u003c\/p\u003e\u003ch3\u003eWhat lengths is the NF-S5 available in?\u003c\/h3\u003e\u003cp\u003eIn 100, 150 and 200 centimetres. Phono cables are deliberately kept short, because the signal from the cartridge is very weak and every extra metre offers more surface area for interference. Choose the shortest length that still lets you position turntable and phono stage comfortably.\u003c\/p\u003e\u003ch3\u003eHow do I avoid hum?\u003c\/h3\u003e\u003cp\u003eFirst, check the grounding. Most turntables need a ground wire to the phono stage in addition to the signal connection – if it's missing or loose, you'll get hum. Also keep power supplies and mains cables away from the tonearm cable. The NF-S5's continuous shielding helps, but it doesn't replace proper grounding.\u003c\/p\u003e\u003ch3\u003eCan I also use the NF-S5 as a normal Cinch cable?\u003c\/h3\u003e\u003cp\u003eTechnically yes, in the Cinch version. But it's built for the phono path, meaning the very low signal levels between tonearm and phono stage. For ordinary line-level connections between a CD player, DAC and amplifier, the NF-A7 from the same ViaBlue family is the more suitable and straightforward choice.\u003c\/p\u003e\u003ch3\u003eWhy buy the ViaBlue NF-S5 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause turntable wiring is more than just plugging in connectors: grounding, the connection type on the tonearm, matching with the phono stage. HD Zürisee in Wädenswil has experience with analogue turntables going back to the nineties, and our technician helps if there's hum. Send us a photo of your tonearm connection.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"5-Pol-DIN (SME) → Cinch \/ 150 cm","offer_id":53023290982736,"sku":"VIA13708","price":780.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch → Cinch \/ 100 cm","offer_id":53023291015504,"sku":"VIA13743","price":640.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch → Cinch \/ 150 cm","offer_id":53023291048272,"sku":"VIA13747","price":740.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch → Cinch \/ 200 cm","offer_id":53023291081040,"sku":"VIA13749","price":840.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN (SME) → Cinch \/ 100 cm","offer_id":53549218890064,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN (SME) → Cinch \/ 200 cm","offer_id":53549218922832,"sku":null,"price":880.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 100 cm","offer_id":53549218955600,"sku":null,"price":720.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 150 cm","offer_id":53549218988368,"sku":null,"price":820.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 200 cm","offer_id":53549219021136,"sku":null,"price":920.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 100 cm","offer_id":53549219053904,"sku":null,"price":745.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 150 cm","offer_id":53549219086672,"sku":null,"price":845.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 200 cm","offer_id":53549219119440,"sku":null,"price":945.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-nf-s5-phono-tonarmkabel-cinch-cobra-produktansicht.jpg?v=1787061268"},{"product_id":"thorens-phonoconnect-phc-150","title":"Thorens PhonoConnect PHC 150 – Phono Cable","description":"\u003cp\u003eThe Thorens PhonoConnect PHC 150 is a high-quality phono connection cable that carries the sensitive signal from the tonearm to the phono preamp – with OFC copper conductors, very low capacitance and integrated grounding.\u003c\/p\u003e\n\u003cp\u003eIt's precisely here, between cartridge and phono stage, that the signal is at its weakest and most susceptible to interference. A properly constructed phono cable is therefore no accessory gimmick, but a genuine building block of good playback.\u003c\/p\u003e\n\u003ch2\u003eWhy the PHC 150?\u003c\/h2\u003e\n\u003cp\u003eBecause it pays attention to the things that really matter for the phono signal. The conductors made of oxygen-free OFC copper and the extremely low capacitance of under 90 pF ensure that high frequencies and fine dynamics arrive with minimal loss – especially important with low-impedance MC systems. The included, correctly implemented grounding keeps hum and interference out. And thanks to four connector variants, it fits practically any tonearm\/phono stage combination.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA balanced, calm sound without the typical phono noises. Where a simple bundled cable swallows treble or hums, the PHC 150 stays clean and open. No voodoo, but solid engineering in the right place – the connection where you should skimp the least.\u003c\/p\u003e\n\u003ch3\u003eWho is the PHC 150 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to connect their tonearm to the preamp with a fixed, high-quality phono line. Straight talk: a cable doesn't replace a better cartridge – but it lets a good one actually do its job properly. Choose the connector variant matching your tonearm output (5-pin DIN or RCA) and your phono input (RCA or balanced XLR). If you're unsure which variant fits, we'll quickly clarify that with you.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PHC 150 is an honest, well-made phono cable: low-capacitance, cleanly grounded, available in the matching connector variant. The unassuming, sensible way to transmit the weakest signal in the chain as well as possible.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono connection cable (tonearm to phono preamp)\u003c\/li\u003e\n\u003cli\u003eConductor material: OFC copper (oxygen-free)\u003c\/li\u003e\n\u003cli\u003eCapacitance: very low (\u0026lt; 90 pF)\u003c\/li\u003e\n\u003cli\u003eGrounding: integrated ground wire\u003c\/li\u003e\n\u003cli\u003eLength: 1.5 meters\u003c\/li\u003e\n\u003cli\u003eConnector variants: 5-pin DIN to RCA, 5-pin DIN to XLR, RCA to RCA, XLR to XLR\u003c\/li\u003e\n\u003cli\u003eIncluded: PHC 150 phono cable in the chosen connector variant, incl. ground wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich connector variant do I need?\u003c\/strong\u003e\u003cbr\u003eThat depends on your tonearm and your phono stage. If your tonearm has a 5-pin DIN output, choose DIN-RCA or DIN-XLR; with an RCA output, RCA-RCA or XLR-XLR. Whether your phono input is unbalanced (RCA) or balanced (XLR) determines the target side. If in doubt, we'll quickly check it for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy a special phono cable with low capacitance?\u003c\/strong\u003e\u003cbr\u003eBecause the phono signal is tiny and sensitive. High cable capacitance dampens the treble and alters the frequency response – especially with MM systems. The very low capacitance of the PHC 150 (\u0026lt; 90 pF) keeps the sound open and balanced and transmits fine dynamics with minimal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs grounding included?\u003c\/strong\u003e\u003cbr\u003eYes. The PHC 150 comes with a separate ground wire that prevents hum loops and interference. It's connected to your phono stage's ground terminal – a must for phono connections, not an extra.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Thorens PHC 150 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we determine the right connector variant together with you, instead of leaving you to guess. Our experienced team in Wädenswil knows tonearm and phono stage combinations from practical experience and helps you build a clean, interference-free system.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching preamp under \u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ephono preamps\u003c\/a\u003e, the matching turntable and cartridge in the \u003ca href=\"\/en-ch\/collections\/thorens\"\u003eThorens\u003c\/a\u003e range, under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and among \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eall turntables\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Thorens","offers":[{"title":"DIN-RCA","offer_id":53271956291920,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"DIN-XLR","offer_id":53271962616144,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true},{"title":"RCA-RCA","offer_id":53271962648912,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"XLR-XLR","offer_id":53271962681680,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/thorens-phonoconnect-phc-150-phono-kabel-draufsicht.png?v=1786784497"},{"product_id":"thorens-phonoconnect-phs-150-phonokabel-silber","title":"Thorens PhonoConnect PHS 150 Silver Phono Cable","description":"\u003cp\u003eThe Thorens PhonoConnect PHS 150 is a high-quality phono connection cable with a pure-silver conductor that connects your turntable to a phono stage or amplifier with minimal loss. It's available in four connector variants – from DIN-RCA to fully balanced XLR-XLR – and is always 1.5 meters long.\u003c\/p\u003e\n\n\u003ch3\u003eWhy pure silver?\u003c\/h3\u003e\n\u003cp\u003eSilver conducts an audio signal better than any other common metal. In the PHS 150, the fine-strand conductors are made of pure silver, the capacitance is under 90 pF, and grounding is already integrated. That way, the cable gets as little as possible in the way of the sensitive phono signal. Where its copper sister PHC 150 plays warm and balanced, the silver model takes a step further toward transparency.\u003c\/p\u003e\n\n\u003ch3\u003eWhat you hear\u003c\/h3\u003e\n\u003cp\u003eCrystal-clear treble, cleanly drawn mids and a soundstage that reveals fine details. Especially with a good MC combination and a high-quality phono stage, the PHS 150 audibly extracts more fine resolution from the groove. The gold-plated plugs sit firmly and protect the contact points from corrosion long-term.\u003c\/p\u003e\n\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the PHS 150 is an audiophile cable for people who have already built up a solid system and are after the last bit of transparency. On an entry-level turntable with an MM system, the difference is smaller – there, the copper variant PHC 150 does just as well and costs less. From the mid-range upward, silver plays out its strengths. Which connector variant you need simply depends on the connections at the tonearm and phono stage; if in doubt, we're happy to help.\u003c\/p\u003e\n\n\u003ch3\u003eOur verdict\u003c\/h3\u003e\n\u003cp\u003eAn honestly made silver phono cable at a fair price for pure silver. Anyone making the jump from a standard bundled cable to genuine high-end silver won't want to miss the calm and openness in the sound anymore. Questions about your system? We at HD Zürisee in Wädenswil are happy to advise you personally.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: phono connection cable (tonearm\/turntable → phono stage\/amplifier)\u003c\/li\u003e\n\u003cli\u003eConductor: fine-strand pure silver\u003c\/li\u003e\n\u003cli\u003eCapacitance: under 90 pF\u003c\/li\u003e\n\u003cli\u003eGrounding: separate ground wire integrated\u003c\/li\u003e\n\u003cli\u003ePlugs: gold-plated\u003c\/li\u003e\n\u003cli\u003eConnector variants: DIN-RCA, DIN-XLR, RCA-RCA, XLR-XLR (XLR = balanced)\u003c\/li\u003e\n\u003cli\u003eLength: 1.5 m\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years\u003c\/li\u003e\n\u003cli\u003eIncluded: PHS 150 phono cable in the chosen connector variant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a pure-silver phono cable bring compared to copper?\u003c\/strong\u003e\u003cbr\u003e\nSilver conducts marginally better and therefore often sounds a shade more transparent and open in the treble. For the PHS 150, that means more fine resolution and calm in the soundstage. The effect is real, but subtle – it's especially worthwhile with a system that's already high-quality.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePHS 150 or PHC 150 – which one should I get?\u003c\/strong\u003e\u003cbr\u003e\nThe copper PHC 150 sounds warm and balanced and is the more affordable, very safe choice. The pure-silver PHS 150 heads toward maximum transparency and detail fidelity. If you have an upscale MC system, go silver; for getting started, copper is entirely sufficient.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich connector variant suits my system?\u003c\/strong\u003e\u003cbr\u003e\nThat depends on your connections. Many tonearms have a 5-pin DIN socket – then you need DIN-RCA or DIN-XLR. If your tonearm and phono stage have RCA or XLR sockets, choose RCA-RCA or XLR-XLR. XLR variants transmit in balanced mode and are the least interference-prone solution on compatible devices.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs grounding included?\u003c\/strong\u003e\u003cbr\u003e\nYes. On the PHS 150, the separate ground wire is already integrated, so that disturbing hum is reliably drained off. You don't need an additional ground cable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy buy the Thorens PHS 150 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003e\nBecause we've been setting up, calibrating and listening to turntables for decades – and know exactly when a silver cable makes a difference and when your money is better spent elsewhere. At HD Zürisee in Wädenswil you get honest advice instead of cable-sound esotericism, plus service and contacts who remain reachable after the purchase too.\u003c\/p\u003e\n\n\u003ch3\u003ePairs well with\u003c\/h3\u003e\n\u003cp\u003eBrowse our matching categories: \u003ca href=\"\/en-ch\/collections\/thorens\"\u003eThorens\u003c\/a\u003e, \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ephono preamps\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Thorens","offers":[{"title":"DIN-RCA","offer_id":53272026841424,"sku":null,"price":600.0,"currency_code":"CHF","in_stock":true},{"title":"DIN-XLR","offer_id":53272027201872,"sku":null,"price":650.0,"currency_code":"CHF","in_stock":true},{"title":"RCA-RCA","offer_id":53272027234640,"sku":null,"price":600.0,"currency_code":"CHF","in_stock":true},{"title":"XLR-XLR","offer_id":53272027267408,"sku":null,"price":650.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/thorens-phonoconnect-phs-150-phonokabel-silber-draufsicht.png?v=1786784653"},{"product_id":"thorens-phonokabel-rca-cinch-1m","title":"Thorens Phono Cable RCA – 1.0 m","description":"\u003cp\u003eThe Thorens phono cable is an RCA connection cable (1.0 m) that connects your turntable to the phono input of your amplifier.\u003c\/p\u003e\n\u003cp\u003eOn a turntable, the signal is tiny — a properly shielded cable keeps hum and interference out and the sound calm.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Phono cable (RCA, stereo)\u003c\/li\u003e\n\u003cli\u003eLength: 1.0 m\u003c\/li\u003e\n\u003cli\u003eConnectors: 2× RCA to 2× RCA\u003c\/li\u003e\n\u003cli\u003eDesign: Shielded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need a special phono cable?\u003c\/h3\u003e\n\u003cp\u003eThe signal level from a turntable is very low, so the phono cable should be well shielded and cleanly made to avoid hum and interference. A length of 1.0 m is comfortably enough for most setups.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the phono cable from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we help you avoid ground loops and interference, and match the whole setup to each other. As an experienced team in Wädenswil, we wire up systems every day.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe right connection for your \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntable\u003c\/a\u003e and more accessories at \u003ca href=\"\/en-ch\/collections\/thorens\"\u003eThorens\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Thorens","offers":[{"title":"Default Title","offer_id":53274025689424,"sku":null,"price":25.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/thorens-phonokabel-rca-cinch-1-0-m-draufsicht.png?v=1786786422"},{"product_id":"viablue-epc-2-silver-phono-tonarmkabel","title":"ViaBlue EPC-2 Silver Phono Tonearm Cable","description":"\u003cp\u003eThe ViaBlue EPC-2 Silver is an upper-tier tonearm cable – built from three individual EPC-2 conductors and available with all common connector combinations between tonearm and phono stage, from 5-pin DIN to XLR.\u003c\/p\u003e\n\u003cp\u003eThe weak signals from the cartridge need maximum protection: the EPC-2 therefore has double, complete shielding made of a spiral shield and a foil shield, which on ViaBlue tonearm cables extends right into the connectors. Silver-plated OFC copper strands provide a balanced, warm sound with clean, punchy bass, while the patented T8 connectors made of surface-finished aluminium ensure a precise, long-term stable contact connection.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eYou get a fully terminated tonearm cable with a Y-splitter made of anodised aluminium (NF-A7 splitter), available in five connector combinations – Cinch to Cinch, straight or angled 5-pin DIN to Cinch, and straight or angled 5-pin DIN to XLR – in three lengths and two sleeve colours. Handmade in Germany.\u003c\/p\u003e\n\u003ch3\u003eWho is the EPC-2 Silver suitable for?\u003c\/h3\u003e\n\u003cp\u003eDesigned for analogue enthusiasts with a high-quality tonearm and phono stage who are chasing the last bit of signal-to-noise ratio and sonic refinement. If your deck has a simple Cinch output and an uncritical phono stage, our NF-S5 is usually the simpler and more cost-effective choice – the EPC-2 Silver pays off where the tonearm and phono stage can actually make the potential audible.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn elaborately shielded, cleanly terminated tonearm cable for analogue setups that mean business. Before upgrading from a standard cable, it's worth checking against your tonearm and phono stage first – we'll tell you honestly whether the extra cost over the NF-S5 pays off on your system.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: tonearm cable, 3-conductor construction (EPC-2)\u003c\/li\u003e\n\u003cli\u003eConnector combinations: Cinch↔Cinch, 5-pin DIN (straight\/90°)↔Cinch, 5-pin DIN (straight\/90°)↔XLR\u003c\/li\u003e\n\u003cli\u003eSplitter: NF-A7 splitter made of anodised aluminium\u003c\/li\u003e\n\u003cli\u003eShielding: double, spiral and foil shield extending into the connectors\u003c\/li\u003e\n\u003cli\u003eConductor material: silver-plated OFC copper strands\u003c\/li\u003e\n\u003cli\u003eConnectors: patented T8 technology, full-metal housing\u003c\/li\u003e\n\u003cli\u003eColour: Cobra or Black\u003c\/li\u003e\n\u003cli\u003eLengths: 100 \/ 150 \/ 200 cm\u003c\/li\u003e\n\u003cli\u003eOrigin: handmade, manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich connector combination do I need?\u003c\/h3\u003e\n\u003cp\u003eThat depends on your tonearm and your phono stage. If the tonearm base has a 5-pin DIN socket, you choose DIN to Cinch or DIN to XLR, depending on what input your phono stage has. If two Cinch sockets already come out of the tonearm, choose Cinch to Cinch. If in doubt, send us a photo of your tonearm connection.\u003c\/p\u003e\n\u003ch3\u003eWhen is the XLR version worthwhile?\u003c\/h3\u003e\n\u003cp\u003eOnly if your phono stage has a balanced XLR input that actually processes the signal in balanced mode. On a normal Cinch phono input, an XLR connector brings no advantage – there, the Cinch or DIN version is the right choice.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the EPC-2 Silver and the NF-S5?\u003c\/h3\u003e\n\u003cp\u003eThe EPC-2 Silver has more elaborate double shielding, silver-plated strands and more connector combinations including XLR. The NF-S5 is the simpler and more affordable solution for Cinch or DIN-to-Cinch connections without an XLR option.\u003c\/p\u003e\n\u003ch3\u003eWhy angled (90°) DIN connectors?\u003c\/h3\u003e\n\u003cp\u003eA 90° angled connector at the tonearm base takes up noticeably less height and relieves the cable routing right at the tonearm, which is mechanically important on some decks. Check beforehand how much space is available around your tonearm base.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the ViaBlue EPC-2 Silver at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you whether your tonearm and phono stage can actually make the EPC-2 Silver's potential audible, instead of automatically recommending the most expensive cable. HD Zürisee in Wädenswil advises on analogue decks and tonearm connections; our technician Maurizio will handle the setup on site on request.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find more ViaBlue cables and accessories for the right system combination in our \u003ca href=\"\/en-ch\/collections\/viablue\"\u003eViaBlue collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"ViaBlue","offers":[{"title":"Cinch (RCA) → Cinch (RCA) \/ 100 cm \/ Cobra","offer_id":53549212729680,"sku":null,"price":350.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch (RCA) → Cinch (RCA) \/ 100 cm \/ Black","offer_id":53549212762448,"sku":null,"price":350.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch (RCA) → Cinch (RCA) \/ 150 cm \/ Cobra","offer_id":53549212795216,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch (RCA) → Cinch (RCA) \/ 150 cm \/ Black","offer_id":53549212827984,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch (RCA) → Cinch (RCA) \/ 200 cm \/ Cobra","offer_id":53549212860752,"sku":null,"price":510.0,"currency_code":"CHF","in_stock":true},{"title":"Cinch (RCA) → Cinch (RCA) \/ 200 cm \/ Black","offer_id":53549212893520,"sku":null,"price":510.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 100 cm \/ Cobra","offer_id":53549212926288,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 100 cm \/ Black","offer_id":53549212959056,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 150 cm \/ Cobra","offer_id":53549212991824,"sku":null,"price":480.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 150 cm \/ Black","offer_id":53549213024592,"sku":null,"price":480.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 200 cm \/ Cobra","offer_id":53549213057360,"sku":null,"price":560.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → Cinch (RCA) \/ 200 cm \/ Black","offer_id":53549213090128,"sku":null,"price":560.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 100 cm \/ Cobra","offer_id":53549213122896,"sku":null,"price":420.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 100 cm \/ Black","offer_id":53549213155664,"sku":null,"price":420.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 150 cm \/ Cobra","offer_id":53549213188432,"sku":null,"price":500.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 150 cm \/ Black","offer_id":53549213221200,"sku":null,"price":500.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 200 cm \/ Cobra","offer_id":53549213253968,"sku":null,"price":580.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → Cinch (RCA) \/ 200 cm \/ Black","offer_id":53549213286736,"sku":null,"price":580.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 100 cm \/ Cobra","offer_id":53549213319504,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 100 cm \/ Black","offer_id":53549213352272,"sku":null,"price":430.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 150 cm \/ Cobra","offer_id":53549213385040,"sku":null,"price":510.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 150 cm \/ Black","offer_id":53549213417808,"sku":null,"price":510.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 200 cm \/ Cobra","offer_id":53549213450576,"sku":null,"price":590.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN → XLR \/ 200 cm \/ Black","offer_id":53549213483344,"sku":null,"price":590.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 100 cm \/ Cobra","offer_id":53549213516112,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 100 cm \/ Black","offer_id":53549213548880,"sku":null,"price":450.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 150 cm \/ Cobra","offer_id":53549213581648,"sku":null,"price":530.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 150 cm \/ Black","offer_id":53549213614416,"sku":null,"price":530.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 200 cm \/ Cobra","offer_id":53549213647184,"sku":null,"price":610.0,"currency_code":"CHF","in_stock":true},{"title":"5-Pol-DIN 90° → XLR \/ 200 cm \/ Black","offer_id":53549213679952,"sku":null,"price":610.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/viablue-epc-2-silver-phono-tonarmkabel-din-rca-frontansicht.jpg?v=1788607308"}],"url":"https:\/\/hdzuerisee.ch\/en-ch\/collections\/phonokabel.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}