{"title":"MERASON","description":"\u003cp\u003e\u003cstrong\u003eMerason\u003c\/strong\u003e is Swiss high-end in its most purist form. The manufactory from Worb in the canton of Bern (niedal audio lab AG) builds digital-to-analogue converters and amplifiers that serve one goal without compromise: the music. No frills, no gimmicks, but genuine multibit conversion with Burr-Brown chips, a fully symmetrical dual-mono design and discrete Class-A output stages, all handmade in Switzerland. At HD Zürisee in Wädenswil you can listen to Merason at your leisure and experience the difference between \"good\" and \"truly good\" for yourself.\u003c\/p\u003e\n\u003ch3\u003eThe Merason range at HD Zürisee\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003efrérot\u003c\/strong\u003e – the compact entry into the Merason world: the DAC with the big sound for the smaller budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epow1\u003c\/strong\u003e – the matching linear power supply that gets even more out of the frérot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReuss\u003c\/strong\u003e – the purist mid-range converter that elegantly closes the gap between the frérot and the DAC1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC1 Mk II\u003c\/strong\u003e – the multi-award-winning reference DAC, optionally with pure silver RCA sockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC2\u003c\/strong\u003e – the step up from the DAC1 Mk II for anyone who wants to get even closer to the recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMountain DAC, Mountain Pre \u0026amp; Mountain Power\u003c\/strong\u003e – the new statement line: DAC, preamplifier and power amplifier as a perfectly matched high-end system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHonestly speaking …\u003c\/h3\u003e\n\u003cp\u003eMerason isn't for people who want lots of buttons, colourful displays and ten sound programmes. Here there's deliberately little to operate, but what matters is right. If you're after a jack-of-all-trades with streaming, room correction and app control, you're better served elsewhere. If you want a converter that simply sounds honest and natural and still convinces you just as much in ten years, you're spot on with Merason. And yes: Swiss craftsmanship has its price – but you can hear that too.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions about Merason\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere is Merason made?\u003c\/strong\u003e\u003cbr\u003eEntirely in Switzerland. Casing, assembly, build and final inspection all take place at niedal audio lab in the canton of Bern, including extensive listening tests of every component.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Merason DAC suits me?\u003c\/strong\u003e\u003cbr\u003eFor starting out, the frérot (ideally with the pow1), for the mid-range the Reuss, as a reference the DAC1 Mk II or DAC2, and right at the top the Mountain line. Come by in Wädenswil, and we'll listen together to what suits your system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the warranty?\u003c\/strong\u003e\u003cbr\u003eMerason products carry a 3-year warranty on presentation of proof of purchase.\u003c\/p\u003e","products":[{"product_id":"merason-frerot-dac-schwarz","title":"Merason frérot D\/A Converter, Black","description":"\u003cp\u003eThe Merason frérot is a compact D\/A converter that turns digital sources like streamers, computers, CD transports, or TVs into natural, finely resolved sound.\u003c\/p\u003e\u003cp\u003eIt's the entry point into the world of Merason — handmade in Switzerland, with the characteristically calm, effortless converter sound the brand is known for. Small in the case, grown-up in tone.\u003c\/p\u003e\u003ch2\u003eWhy the frérot?\u003c\/h2\u003e\u003cp\u003eAt its heart works a Burr-Brown 1794A with a discrete I\/V stage and fully balanced Class A output — the same converter chip type as in the big DAC-1, though there it's used twice over in mono operation. Ten separate power supplies feed each stage individually, and all inputs (USB via Amanero, 2× coax, 2× Toslink) are galvanically isolated and de-jittered. The result is a surprisingly large, calm sound that goes well beyond what the price class suggests. The trade press agrees: High Fidelity named the frérot \"Best Product\" in 2021, and LowBeats awarded it 4.6 out of 5 stars and the rating \"outstanding\" in 2020.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eNaturalness without digital harshness. Voices and instruments stand tangibly in the room, dynamic swings arrive cleanly, and even after hours, the sound stays relaxed rather than fatiguing. The frérot doesn't artificially warm anything up — it lets the recording breathe. Honestly, that's exactly what you want from a good converter.\u003c\/p\u003e\u003ch3\u003eWho is the frérot for?\u003c\/h3\u003e\u003cp\u003eIdeal if you finally want real hi-fi sound out of your streamer, laptop, TV, or CD transport without spending a fortune. Straight talk: the frérot is a pure D\/A converter — no streamer, no headphone amp, no app hub. If you maintain a large DSD collection, you're better served by the Mountain DAC; the frérot plays PCM up to 192 kHz\/24-bit. And if you only feed it compressed files over Bluetooth, you're buying a racing bike to wait for the tram — its potential wants audibly better sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor what it can do, the frérot is almost too cheap. If you want even more silence and fine dynamics, add the optional pow1 linear power supply — that takes the little one up a full class. At HD Zürisee in Wädenswil, we'll advise you on whether the frérot suits your system solo or with the pow1.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e Burr-Brown 1794A (stereo), discrete I\/V stage, fully balanced Class A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e max. 4 V RMS (balanced\/XLR), max. 2 V RMS (unbalanced\/RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× USB (Amanero), 2× coaxial (RCA), 2× Toslink – all galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ±0.2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.006 % · Signal-to-noise ratio \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 10 separate power supplies, external 9 V DC plug-in adapter (upgradable with Merason pow1)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 22.5 × 5 × 18 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 995 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Swiss Made · 3-year warranty\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason frérot D\/A converter (Black), external plug-in power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the frérot a streamer?\u003c\/h3\u003e\u003cp\u003eNo, the frérot is a pure D\/A converter. You connect your streamer, computer, CD transport, or TV via USB, coax, or Toslink — the frérot turns it into first-class sound. It doesn't come with a network streamer or a playback app.\u003c\/p\u003e\u003ch3\u003eWhat resolution does the frérot play?\u003c\/h3\u003e\u003cp\u003eThe frérot processes PCM up to 192 kHz\/24-bit across all inputs. That covers CD, Qobuz, Tidal, and nearly all hi-res files. It doesn't play native DSD — if you need that, take a look at the Merason Mountain DAC.\u003c\/p\u003e\u003ch3\u003eWhat does the pow1 power supply add?\u003c\/h3\u003e\u003cp\u003eThe optional pow1 linear power supply replaces the included plug-in adapter and delivers a calmer background, more dynamics, and body. Several magazines credit the duo with a jump to the next class. It can be added at any time.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason frérot from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we know which converter really blossoms with which system. As an experienced team in Wädenswil, we advise you on sources, cables, and the pow1 question, handle delivery and installation, and take care of service. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe frérot is best fed with a clean source and connected properly: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason (pow1 \u0026amp; more)\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101494075728,"sku":null,"price":1372.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-frerot-d-a-wandler-schwarz-frontansicht.jpg?v=1786524064"},{"product_id":"merason-frerot-dac-grau","title":"Merason frérot D\/A Converter, Grey","description":"\u003cp\u003eThe Merason frérot is a compact D\/A converter that turns digital sources like streamers, computers, CD transports, or TVs into natural, finely resolved sound.\u003c\/p\u003e\u003cp\u003eIt's the entry point into the world of Merason — handmade in Switzerland, with the characteristically calm, effortless converter sound the brand is known for. Small in the case, grown-up in tone.\u003c\/p\u003e\u003ch2\u003eWhy the frérot?\u003c\/h2\u003e\u003cp\u003eAt its heart works a Burr-Brown 1794A with a discrete I\/V stage and fully balanced Class A output — the same converter chip type as in the big DAC-1, though there it's used twice over in mono operation. Ten separate power supplies feed each stage individually, and all inputs (USB via Amanero, 2× coax, 2× Toslink) are galvanically isolated and de-jittered. The result is a surprisingly large, calm sound that goes well beyond what the price class suggests. The trade press agrees: High Fidelity named the frérot \"Best Product\" in 2021, and LowBeats awarded it 4.6 out of 5 stars and the rating \"outstanding\" in 2020.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eNaturalness without digital harshness. Voices and instruments stand tangibly in the room, dynamic swings arrive cleanly, and even after hours, the sound stays relaxed rather than fatiguing. The frérot doesn't artificially warm anything up — it lets the recording breathe. Honestly, that's exactly what you want from a good converter.\u003c\/p\u003e\u003ch3\u003eWho is the frérot for?\u003c\/h3\u003e\u003cp\u003eIdeal if you finally want real hi-fi sound out of your streamer, laptop, TV, or CD transport without spending a fortune. Straight talk: the frérot is a pure D\/A converter — no streamer, no headphone amp, no app hub. If you maintain a large DSD collection, you're better served by the Mountain DAC; the frérot plays PCM up to 192 kHz\/24-bit. And if you only feed it compressed files over Bluetooth, you're buying a racing bike to wait for the tram — its potential wants audibly better sources.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor what it can do, the frérot is almost too cheap. If you want even more silence and fine dynamics, add the optional pow1 linear power supply — that takes the little one up a full class. At HD Zürisee in Wädenswil, we'll advise you on whether the frérot suits your system solo or with the pow1.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e Burr-Brown 1794A (stereo), discrete I\/V stage, fully balanced Class A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e max. 4 V RMS (balanced\/XLR), max. 2 V RMS (unbalanced\/RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 1× USB (Amanero), 2× coaxial (RCA), 2× Toslink – all galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupported formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ±0.2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.006 % · Signal-to-noise ratio \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 10 separate power supplies, external 9 V DC plug-in adapter (upgradable with Merason pow1)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 22.5 × 5 × 18 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 995 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Swiss Made · 3-year warranty\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason frérot D\/A converter (Grey), external plug-in power supply, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the frérot a streamer?\u003c\/h3\u003e\u003cp\u003eNo, the frérot is a pure D\/A converter. You connect your streamer, computer, CD transport, or TV via USB, coax, or Toslink — the frérot turns it into first-class sound. It doesn't come with a network streamer or a playback app.\u003c\/p\u003e\u003ch3\u003eWhat resolution does the frérot play?\u003c\/h3\u003e\u003cp\u003eThe frérot processes PCM up to 192 kHz\/24-bit across all inputs. That covers CD, Qobuz, Tidal, and nearly all hi-res files. It doesn't play native DSD — if you need that, take a look at the Merason Mountain DAC.\u003c\/p\u003e\u003ch3\u003eWhat does the pow1 power supply add?\u003c\/h3\u003e\u003cp\u003eThe optional pow1 linear power supply replaces the included plug-in adapter and delivers a calmer background, more dynamics, and body. Several magazines credit the duo with a jump to the next class. It can be added at any time.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason frérot from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we know which converter really blossoms with which system. As an experienced team in Wädenswil, we advise you on sources, cables, and the pow1 question, handle delivery and installation, and take care of service. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe frérot is best fed with a clean source and connected properly: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason (pow1 \u0026amp; more)\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101494436176,"sku":null,"price":1372.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-frerot-d-a-wandler-grau-frontansicht.png?v=1786524062"},{"product_id":"merason-pow1-linearnetzteil-schwarz","title":"Merason pow1 Linear Power Supply for frérot, Black","description":"\u003cp\u003eThe Merason pow1 is an external linear power supply developed specifically for the Merason frérot, and it noticeably lifts its sound.\u003c\/p\u003e\u003cp\u003eIt replaces the included plug-in adapter and gives the little converter exactly what it deliberately lacks: plenty of clean, quiet power. Swiss Made, and stackable with the frérot.\u003c\/p\u003e\u003ch2\u003eWhy the pow1?\u003c\/h2\u003e\u003cp\u003eThree separate linear power supplies with a large, quiet transformer replace the simple plug-in adapter: two feed the audio section, the third the digital and logic section. The frérot is deliberately built to sound better with better power — that's exactly where the pow1 comes in. Reviewers such as Part-Time Audiophile honoured the frérot + pow1 duo with the \"Reviewer's Choice Award.\"\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eMore calm in the background, out of which fine details only now properly emerge. Transients arrive crisper, decay becomes more natural, imaging more tangible. Sounds like voodoo, a power supply for over 800 francs? It isn't — the difference is clearly audible in a direct comparison.\u003c\/p\u003e\u003ch3\u003eWho is the pow1 for?\u003c\/h3\u003e\u003cp\u003eFor any frérot owner who wants to extract that last bit of performance — and it's the most sensible upgrade before considering other components. Straight talk: the pow1 fits the frérot exclusively. The DAC 1 Mk II, DAC 2, and the Mountain line already have their power supplies built in — it's not meant for those. And if you're already eyeing the DAC 1 Mk II anyway, you can skip the detour via the pow1.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe pow1 isn't an accessory gimmick, but a genuine sound booster for the frérot. At HD Zürisee in Wädenswil, we'll tell you honestly whether the upgrade is worthwhile in your case, or whether your budget would go further elsewhere.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Linear power supply, specifically for the Merason frérot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3 separate linear power supplies (2× audio section, 1× digital\/logic)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTransformer:\u003c\/strong\u003e generously sized, especially quiet, to Merason specification\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 22.5 × 5 × 18 cm (matches the frérot, stackable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 1.2 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Swiss Made · 3-year warranty\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason pow1 linear power supply (Black), connecting cable to the frérot, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the pow1 fit every Merason DAC?\u003c\/h3\u003e\u003cp\u003eNo. The pow1 is developed exclusively for the frérot. The DAC 1 Mk II, DAC 2, and the Mountain line already have their elaborate power supplies built in and can't be supplemented with it.\u003c\/p\u003e\u003ch3\u003eHow big is the sonic improvement?\u003c\/h3\u003e\u003cp\u003eClearly audible: a calmer background, more dynamics and body. Several magazines credit the frérot with pow1 with a jump to the next class. You'll judge it most honestly in a direct A\/B comparison.\u003c\/p\u003e\u003ch3\u003eDo I need tools to connect it?\u003c\/h3\u003e\u003cp\u003eNo. You connect the pow1 and frérot with the included cable, plug in the power cord — done. The old plug-in adapter can disappear into a drawer.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason pow1 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we know the frérot and pow1 together and tell you honestly whether the upgrade makes sense for you. In Wädenswil, you can hear the difference with and without the pow1; we deliver, connect it, and are there if you have questions. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe pow1 shows its full potential on the frérot and in a clean system: \u003ca href=\"\/en-ch\/collections\/dac\"\u003eDACs \u0026amp; D\/A Converters\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101496435024,"sku":null,"price":862.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-pow1-linearnetzteil-schwarz-frontansicht.png?v=1786524108"},{"product_id":"merason-pow1-linearnetzteil-grau","title":"Merason pow1 Linear Power Supply for frérot, Grey","description":"\u003cp\u003eThe Merason pow1 is an external linear power supply developed specifically for the Merason frérot, and it noticeably lifts its sound.\u003c\/p\u003e\u003cp\u003eIt replaces the included plug-in adapter and gives the little converter exactly what it deliberately lacks: plenty of clean, quiet power. Swiss Made, and stackable with the frérot.\u003c\/p\u003e\u003ch2\u003eWhy the pow1?\u003c\/h2\u003e\u003cp\u003eThree separate linear power supplies with a large, quiet transformer replace the simple plug-in adapter: two feed the audio section, the third the digital and logic section. The frérot is deliberately built to sound better with better power — that's exactly where the pow1 comes in. Reviewers such as Part-Time Audiophile honoured the frérot + pow1 duo with the \"Reviewer's Choice Award.\"\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eMore calm in the background, out of which fine details only now properly emerge. Transients arrive crisper, decay becomes more natural, imaging more tangible. Sounds like voodoo, a power supply for over 800 francs? It isn't — the difference is clearly audible in a direct comparison.\u003c\/p\u003e\u003ch3\u003eWho is the pow1 for?\u003c\/h3\u003e\u003cp\u003eFor any frérot owner who wants to extract that last bit of performance — and it's the most sensible upgrade before considering other components. Straight talk: the pow1 fits the frérot exclusively. The DAC 1 Mk II, DAC 2, and the Mountain line already have their power supplies built in — it's not meant for those. And if you're already eyeing the DAC 1 Mk II anyway, you can skip the detour via the pow1.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe pow1 isn't an accessory gimmick, but a genuine sound booster for the frérot. At HD Zürisee in Wädenswil, we'll tell you honestly whether the upgrade is worthwhile in your case, or whether your budget would go further elsewhere.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Linear power supply, specifically for the Merason frérot\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 3 separate linear power supplies (2× audio section, 1× digital\/logic)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTransformer:\u003c\/strong\u003e generously sized, especially quiet, to Merason specification\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 22.5 × 5 × 18 cm (matches the frérot, stackable)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 1.2 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Swiss Made · 3-year warranty\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason pow1 linear power supply (Grey), connecting cable to the frérot, power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the pow1 fit every Merason DAC?\u003c\/h3\u003e\u003cp\u003eNo. The pow1 is developed exclusively for the frérot. The DAC 1 Mk II, DAC 2, and the Mountain line already have their elaborate power supplies built in and can't be supplemented with it.\u003c\/p\u003e\u003ch3\u003eHow big is the sonic improvement?\u003c\/h3\u003e\u003cp\u003eClearly audible: a calmer background, more dynamics and body. Several magazines credit the frérot with pow1 with a jump to the next class. You'll judge it most honestly in a direct A\/B comparison.\u003c\/p\u003e\u003ch3\u003eDo I need tools to connect it?\u003c\/h3\u003e\u003cp\u003eNo. You connect the pow1 and frérot with the included cable, plug in the power cord — done. The old plug-in adapter can disappear into a drawer.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason pow1 from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we know the frérot and pow1 together and tell you honestly whether the upgrade makes sense for you. In Wädenswil, you can hear the difference with and without the pow1; we deliver, connect it, and are there if you have questions. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe pow1 shows its full potential on the frérot and in a clean system: \u003ca href=\"\/en-ch\/collections\/dac\"\u003eDACs \u0026amp; D\/A Converters\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101496959312,"sku":null,"price":862.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-pow1-linearnetzteil-grau-frontansicht.png?v=1786524105"},{"product_id":"merason-reuss-schwarz","title":"Merason Reuss D\/A Converter, Black","description":"\u003cp\u003eThe Merason Reuss is a fully balanced D\/A converter that reproduces digital sources neutrally, energetically, and with great spatial depth.\u003c\/p\u003e\u003cp\u003eHandmade at niedal audio lab in Switzerland, it sits between source and amplifier and extracts the maximum from zeros and ones. The consistent entry point into Merason's flagship converters.\u003c\/p\u003e\u003ch2\u003eWhy the Reuss?\u003c\/h2\u003e\u003cp\u003eTwo Burr-Brown 1794A chips — one per channel — provide around 5 dB more dynamics than a shared design. The current signal is converted to voltage discretely, buffered in Class A, and carried fully balanced across four channels. Every input is galvanically isolated (USB via Amanero with two clock generators), and twelve dedicated linear power supplies with oversized transformers feed each stage individually.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eStudio-grade neutrality instead of flattery. The Reuss shows you what's really on the recording — with calm, structure, and a soundstage that makes plenty of pricier devices look old. If you want the truth of the recording, this is exactly right.\u003c\/p\u003e\u003ch3\u003eWho is the Reuss for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants an honest, neutral converter in a good system. Straight talk: the Reuss is a pure D\/A converter — no volume control, no display, no remote. You need an amplifier or preamp with a line-level input. It plays PCM up to 192 kHz\/24-bit, but no DSD — got a large DSD collection? Then the Mountain DAC is the better fit. Tonally, it doesn't sweeten anything; if you're after warmth, look elsewhere. And in operation, the case gets noticeably warm, so don't lock it in a closed cabinet.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Reuss delivers the Merason converter philosophy at the fairest price. If you want more polish, step up to the DAC 1 Mk II; if you're after neutrality and honesty, this is an excellent fit. Which combination suits your speakers is something we'll work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch3\u003eWhat the trade press says\u003c\/h3\u003e\u003cp\u003e\"A DAC for purists and everyone for whom smooth, musical reproduction combined with high detail resolution is the top priority.\" — HIFISTATEMENT, 2024. fairaudio honoured the Reuss with the \"favourite Award\" in 2025.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, fully balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown 1794A, discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 4 independent, Class A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e USB (Amanero), AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3 V RMS, RCA unbalanced max. 1.5 V RMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.5 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate linear power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 5 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason Reuss D\/A converter (Black), power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat devices can I connect to the Reuss?\u003c\/h3\u003e\u003cp\u003eAnything digital: a streamer or computer via USB, a CD transport via coax, the TV optically via Toslink, studio and high-end sources balanced via AES\/EBU. You connect the analogue output to your amplifier either balanced (XLR) or unbalanced (RCA).\u003c\/p\u003e\u003ch3\u003eDoes the Reuss play DSD or hi-res above 192 kHz?\u003c\/h3\u003e\u003cp\u003eNo. The Reuss is designed for PCM up to 192 kHz\/24-bit and deliberately does without DSD. That's more than enough for CD, Qobuz, Tidal, and the vast majority of hi-res files. If you need native DSD, the Merason Mountain DAC is the right address.\u003c\/p\u003e\u003ch3\u003eDo I need a preamplifier as well?\u003c\/h3\u003e\u003cp\u003eYes. The Reuss has a fixed output level with no volume control of its own. You run it into an integrated amplifier with a line-level input or into a preamp. We'll work out together which combination fits.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason Reuss from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a converter is only as good as its integration. As an authorized Merason dealer in Wädenswil, we tune the Reuss to your sources, amplifier, and speakers, deliver, install, and remain your contact for service. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou integrate the Reuss cleanly into your system — source in, amplifier out: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101790626128,"sku":null,"price":5160.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-reuss-d-a-wandler-schwarz-frontansicht.png?v=1786524126"},{"product_id":"merason-reuss-grau","title":"Merason Reuss D\/A Converter, Grey","description":"\u003cp\u003eThe Merason Reuss is a fully balanced D\/A converter that reproduces digital sources neutrally, energetically, and with great spatial depth.\u003c\/p\u003e\u003cp\u003eHandmade at niedal audio lab in Switzerland, it sits between source and amplifier and extracts the maximum from zeros and ones. The consistent entry point into Merason's flagship converters.\u003c\/p\u003e\u003ch2\u003eWhy the Reuss?\u003c\/h2\u003e\u003cp\u003eTwo Burr-Brown 1794A chips — one per channel — provide around 5 dB more dynamics than a shared design. The current signal is converted to voltage discretely, buffered in Class A, and carried fully balanced across four channels. Every input is galvanically isolated (USB via Amanero with two clock generators), and twelve dedicated linear power supplies with oversized transformers feed each stage individually.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eStudio-grade neutrality instead of flattery. The Reuss shows you what's really on the recording — with calm, structure, and a soundstage that makes plenty of pricier devices look old. If you want the truth of the recording, this is exactly right.\u003c\/p\u003e\u003ch3\u003eWho is the Reuss for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants an honest, neutral converter in a good system. Straight talk: the Reuss is a pure D\/A converter — no volume control, no display, no remote. You need an amplifier or preamp with a line-level input. It plays PCM up to 192 kHz\/24-bit, but no DSD — got a large DSD collection? Then the Mountain DAC is the better fit. Tonally, it doesn't sweeten anything; if you're after warmth, look elsewhere. And in operation, the case gets noticeably warm, so don't lock it in a closed cabinet.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Reuss delivers the Merason converter philosophy at the fairest price. If you want more polish, step up to the DAC 1 Mk II; if you're after neutrality and honesty, this is an excellent fit. Which combination suits your speakers is something we'll work out with you at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch3\u003eWhat the trade press says\u003c\/h3\u003e\u003cp\u003e\"A DAC for purists and everyone for whom smooth, musical reproduction combined with high detail resolution is the top priority.\" — HIFISTATEMENT, 2024. fairaudio honoured the Reuss with the \"favourite Award\" in 2025.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, fully balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown 1794A, discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 4 independent, Class A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e USB (Amanero), AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3 V RMS, RCA unbalanced max. 1.5 V RMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.5 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.015 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 115 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate linear power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 5 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason Reuss D\/A converter (Grey), power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat devices can I connect to the Reuss?\u003c\/h3\u003e\u003cp\u003eAnything digital: a streamer or computer via USB, a CD transport via coax, the TV optically via Toslink, studio and high-end sources balanced via AES\/EBU. You connect the analogue output to your amplifier either balanced (XLR) or unbalanced (RCA).\u003c\/p\u003e\u003ch3\u003eDoes the Reuss play DSD or hi-res above 192 kHz?\u003c\/h3\u003e\u003cp\u003eNo. The Reuss is designed for PCM up to 192 kHz\/24-bit and deliberately does without DSD. That's more than enough for CD, Qobuz, Tidal, and the vast majority of hi-res files. If you need native DSD, the Merason Mountain DAC is the right address.\u003c\/p\u003e\u003ch3\u003eDo I need a preamplifier as well?\u003c\/h3\u003e\u003cp\u003eYes. The Reuss has a fixed output level with no volume control of its own. You run it into an integrated amplifier with a line-level input or into a preamp. We'll work out together which combination fits.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason Reuss from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a converter is only as good as its integration. As an authorized Merason dealer in Wädenswil, we tune the Reuss to your sources, amplifier, and speakers, deliver, install, and remain your contact for service. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou integrate the Reuss cleanly into your system — source in, amplifier out: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101798326608,"sku":null,"price":5160.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-reuss-d-a-wandler-grau-frontansicht.png?v=1786524122"},{"product_id":"merason-dac-1-mk-ii-silber","title":"Merason DAC 1 Mk II D\/A Converter, Silver","description":"\u003cp\u003eThe Merason DAC 1 Mk II is a fully balanced reference D\/A converter that turns digital sources into music with the utmost resolution and naturalness.\u003c\/p\u003e\u003cp\u003eIt's the polished step up from the Reuss and has been a favourite of the trade press for years. Handbuilt in Switzerland — with a choice of gold-plated or pure-silver RCA jacks.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 1 Mk II?\u003c\/h2\u003e\u003cp\u003eTechnically, it shares the Reuss's DNA: two Burr-Brown 1794A chips (one per channel), a discrete I\/V stage, fully balanced Class A output, every input galvanically isolated, twelve dedicated linear power supplies. The difference lies in the fine-tuning — a tighter frequency response (±0.3 dB), less distortion (\u0026lt; 0.01 %), and more signal-to-noise ratio (\u0026gt; 120 dB). You hear this as even more calm, resolution, and body. It's no accident that Part-Time Audiophile recommended it in its 2024 Buyer's Guide, and pt.audio awarded it a \"Highly recommended\" in early 2024.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eA soundstage that puts you right in the middle of the concert, and a resolution that reveals the finest shadings — without ever becoming hard or analytical. The DAC 1 Mk II stays honest rather than flattering; it's the converter that's no longer the bottleneck in a good system.\u003c\/p\u003e\u003ch3\u003eWho is the DAC 1 Mk II for?\u003c\/h3\u003e\u003cp\u003eFor the genuinely good system that deserves the right converter. Straight talk: it too is a pure D\/A converter — no volume control, no remote, no DSD (PCM up to 192 kHz\/24-bit). You need an amplifier or preamp with a line-level input. And honestly: visually and in construction, it resembles the more affordable Reuss — if you don't need that last bit, the Reuss already serves you superbly. If you want it, you get it here.\u003c\/p\u003e\u003ch3\u003eStandard or pure-silver RCA?\u003c\/h3\u003e\u003cp\u003eStandard means gold-plated RCA output jacks — the classic DAC 1 Mk II. For a surcharge (+CHF 363), the RCA jacks are available in pure silver, for a marginally lower contact resistance. Honestly, not a night-and-day difference, but the final polish for completists. We'll advise you on whether it's worth it.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level — beyond it lies only the DAC 2 or the Mountain, for those who want the absolute last word without compromise. Listen to it at HD Zürisee in Wädenswil on your own system.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, fully balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown 1794A, discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 4 independent, Class A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e USB (Amanero), AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3 V RMS, RCA unbalanced max. 1.5 V RMS (standard gold-plated, pure silver optional)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.01 %\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate linear power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver (standard or with pure-silver RCA jacks)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason DAC 1 Mk II D\/A converter (Silver), power cable, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow does the DAC 1 Mk II differ from the Reuss and the DAC 2?\u003c\/h3\u003e\u003cp\u003eThe Reuss is the entry point into the same converter philosophy; the DAC 1 Mk II follows up with better measurements and more fine-tuning — the trade press's reference favourite. The DAC 2 takes it a step further with true dual-mono construction and Class A operation without feedback.\u003c\/p\u003e\u003ch3\u003eWhat does the pure-silver RCA jack add?\u003c\/h3\u003e\u003cp\u003eInstead of the standard gold-plated jacks, the RCA output carries jacks made of pure silver with a marginally lower contact resistance. This is the final polish for purists — no huge leap, but the option to take this detail along too.\u003c\/p\u003e\u003ch3\u003eDo I need a preamplifier, and does it play DSD?\u003c\/h3\u003e\u003cp\u003eYou need an amplifier or preamp with a line-level input, since the DAC 1 Mk II has a fixed output level without volume control. It doesn't play DSD — it's designed for PCM up to 192 kHz\/24-bit, which covers the vast majority of sources.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 1 Mk II from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a reference converter needs a system on the same level. As an authorized Merason dealer in Wädenswil, we demonstrate the DAC 1 Mk II on your own components, advise on sources and cabling, deliver, and install. Call us (044 680 22 00), write to us, or use WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFor the DAC 1 Mk II to show what it can do, it needs a clean source and a system on the same level: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Standard","offer_id":53101818151248,"sku":null,"price":7933.0,"currency_code":"CHF","in_stock":true},{"title":"mit Reinsilber-Cinch-Buchse","offer_id":53101819691344,"sku":null,"price":8296.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-1-mk-ii-d-a-wandler-silber-frontansicht.png?v=1786524014"},{"product_id":"merason-dac-1-mk-ii-schwarz","title":"Merason DAC 1 Mk II D\/A Converter, Black","description":"\u003cp\u003eThe Merason DAC 1 Mk II is a fully balanced reference D\/A converter that turns digital sources into music with the highest resolution and naturalness.\u003c\/p\u003e\u003cp\u003eIt's the fine-tuned step up from the Reuss and has been a favourite of the specialist press for years. Handbuilt in Switzerland – available with gold-plated or pure-silver RCA jacks.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 1 Mk II?\u003c\/h2\u003e\u003cp\u003eTechnically it shares the Reuss's DNA: two Burr-Brown 1794A (one per channel), discrete I\/V stage, fully balanced Class-A output, every input galvanically isolated, twelve dedicated linear power supplies. The difference lies in the fine-tuning – a tighter frequency response (±0.3 dB), lower distortion (\u003c 0.01%) and more signal-to-noise headroom (\u003e 120 dB). You hear it as even more calm, resolution and body. Not for nothing did Part-Time Audiophile recommend it in its 2024 Buyer's Guide, and pt.audio gave it a \"Highly recommended\" in early 2024.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eA soundstage that puts you right in the middle of the concert, and a resolution that reveals the finest shadings – without ever turning hard or analytical. The DAC 1 Mk II stays honest rather than flattering; it's the converter that's no longer the bottleneck in a good chain.\u003c\/p\u003e\u003ch3\u003eWho's the DAC 1 Mk II for?\u003c\/h3\u003e\u003cp\u003eFor the genuinely good system that deserves the right converter. Plain talk: it too is a pure D\/A converter – no volume control, no remote, no DSD (PCM up to 192 kHz\/24 bit). You need an amplifier or preamp with a line-level input. And honestly: visually and in construction it resembles the more affordable Reuss – if you don't need that last increment, the Reuss already serves you excellently. If you want it, you get it here.\u003c\/p\u003e\u003ch3\u003eStandard or pure-silver RCA?\u003c\/h3\u003e\u003cp\u003eStandard means gold-plated RCA output jacks – the classic DAC 1 Mk II. For a surcharge (+CHF 363) you can get the RCA jacks in pure silver, for a minimally lower contact resistance. Honestly, not a night-and-day difference, but the fine finishing touch for completists. We're happy to advise you on whether it's worth it.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level – beyond that, only those who want the absolute last word, uncompromisingly, with the DAC 2 or Mountain need go further. Listen to it at HD Zürisee in Wädenswil on your own chain.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, fully balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown 1794A, discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 4 independent, Class-A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e USB (Amanero), AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3 V RMS, RCA unbalanced max. 1.5 V RMS (standard gold-plated, optional pure silver)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u003c 0.01%\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate linear power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black (standard or with pure-silver RCA jacks)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e Merason DAC 1 Mk II D\/A converter (Black), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the DAC 1 Mk II, the Reuss and the DAC 2?\u003c\/h3\u003e\u003cp\u003eThe Reuss is the entry point into the same converter philosophy, the DAC 1 Mk II follows up with better measurements and more fine-tuning – the specialist press's reference favourite. The DAC 2 goes one step further still, with true dual-mono and Class A without feedback.\u003c\/p\u003e\u003ch3\u003eWhat does the pure-silver RCA jack get you?\u003c\/h3\u003e\u003cp\u003eInstead of the gold-plated standard jacks, the RCA output carries jacks made of pure silver with minimally lower contact resistance. It's the final fine touch for purists – no giant leap, but the option to capture even this detail.\u003c\/p\u003e\u003ch3\u003eDo I need a preamp, and does it play DSD?\u003c\/h3\u003e\u003cp\u003eYou need an amplifier or preamp with a line-level input, because the DAC 1 Mk II has a fixed output level with no volume control. It doesn't play DSD – it's designed for PCM up to 192 kHz\/24 bit, which is enough for the vast majority of sources.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 1 Mk II from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a reference converter needs a chain that's on equal footing. As an authorised Merason dealer in Wädenswil, we'll demonstrate the DAC 1 Mk II on your own components, advise you on sources and cabling, and deliver and install it. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFor the DAC 1 Mk II to show what it can do, it needs a clean source and a chain on equal footing: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamer\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD Players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Standard","offer_id":53101823951184,"sku":null,"price":7933.0,"currency_code":"CHF","in_stock":true},{"title":"mit Reinsilber-Cinch-Buchse","offer_id":53101824770384,"sku":null,"price":8296.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-1-mk-ii-d-a-wandler-schwarz-frontansicht.png?v=1786523189"},{"product_id":"merason-dac-1-mk-ii-cider","title":"Merason DAC 1 Mk II D\/A Converter, Cider","description":"\u003cp\u003eThe Merason DAC 1 Mk II is a fully balanced reference D\/A converter that turns digital sources into music with the highest resolution and naturalness.\u003c\/p\u003e\u003cp\u003eIt's the fine-tuned step up from the Reuss and has been a favourite of the specialist press for years. Handbuilt in Switzerland – here in the warm champagne tone Cider, available with gold-plated or pure-silver RCA jacks.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 1 Mk II?\u003c\/h2\u003e\u003cp\u003eTechnically it shares the Reuss's DNA: two Burr-Brown 1794A (one per channel), discrete I\/V stage, fully balanced Class-A output, every input galvanically isolated, twelve dedicated linear power supplies. The difference lies in the fine-tuning – a tighter frequency response (±0.3 dB), lower distortion (\u003c 0.01%) and more signal-to-noise headroom (\u003e 120 dB). You hear it as even more calm, resolution and body. Not for nothing did Part-Time Audiophile recommend it in its 2024 Buyer's Guide, and pt.audio gave it a \"Highly recommended\" in early 2024.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eA soundstage that puts you right in the middle of the concert, and a resolution that reveals the finest shadings – without ever turning hard or analytical. The DAC 1 Mk II stays honest rather than flattering; it's the converter that's no longer the bottleneck in a good chain.\u003c\/p\u003e\u003ch3\u003eWho's the DAC 1 Mk II for?\u003c\/h3\u003e\u003cp\u003eFor the genuinely good system that deserves the right converter. Plain talk: it too is a pure D\/A converter – no volume control, no remote, no DSD (PCM up to 192 kHz\/24 bit). You need an amplifier or preamp with a line-level input. And honestly: visually and in construction it resembles the more affordable Reuss – if you don't need that last increment, the Reuss already serves you excellently. If you want it, you get it here.\u003c\/p\u003e\u003ch3\u003eStandard or pure-silver RCA?\u003c\/h3\u003e\u003cp\u003eStandard means gold-plated RCA output jacks – the classic DAC 1 Mk II. For a surcharge (+CHF 363) you can get the RCA jacks in pure silver, for a minimally lower contact resistance. Honestly, not a night-and-day difference, but the fine finishing touch for completists. We're happy to advise you on whether it's worth it.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level – beyond that, only those who want the absolute last word, uncompromisingly, with the DAC 2 or Mountain need go further. Listen to it at HD Zürisee in Wädenswil on your own chain.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, fully balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown 1794A, discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannels:\u003c\/strong\u003e 4 independent, Class-A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e USB (Amanero), AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3 V RMS, RCA unbalanced max. 1.5 V RMS (standard gold-plated, optional pure silver)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u003c 0.01%\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate linear power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Cider (standard or with pure-silver RCA jacks)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e Merason DAC 1 Mk II D\/A converter (Cider), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat's the difference between the DAC 1 Mk II, the Reuss and the DAC 2?\u003c\/h3\u003e\u003cp\u003eThe Reuss is the entry point into the same converter philosophy, the DAC 1 Mk II follows up with better measurements and more fine-tuning – the specialist press's reference favourite. The DAC 2 goes one step further still, with true dual-mono and Class A without feedback.\u003c\/p\u003e\u003ch3\u003eWhat does the pure-silver RCA jack get you?\u003c\/h3\u003e\u003cp\u003eInstead of the gold-plated standard jacks, the RCA output carries jacks made of pure silver with minimally lower contact resistance. It's the final fine touch for purists – no giant leap, but the option to capture even this detail.\u003c\/p\u003e\u003ch3\u003eDo I need a preamp, and does it play DSD?\u003c\/h3\u003e\u003cp\u003eYou need an amplifier or preamp with a line-level input, because the DAC 1 Mk II has a fixed output level with no volume control. It doesn't play DSD – it's designed for PCM up to 192 kHz\/24 bit, which is enough for the vast majority of sources.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 1 Mk II from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a reference converter needs a chain that's on equal footing. As an authorised Merason dealer in Wädenswil, we'll demonstrate the DAC 1 Mk II on your own components, advise you on sources and cabling, and deliver and install it. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eFor the DAC 1 Mk II to show what it can do, it needs a clean source and a chain on equal footing: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamer\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/cd-player\"\u003eCD Players\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Standard","offer_id":53101829652816,"sku":null,"price":7933.0,"currency_code":"CHF","in_stock":true},{"title":"mit Reinsilber-Cinch-Buchse","offer_id":53101830144336,"sku":null,"price":8296.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-1-mk-ii-d-a-wandler-cider-frontansicht.png?v=1786523092"},{"product_id":"merason-dac-2-cider","title":"Merason DAC 2 D\/A Converter, Cider","description":"\u003cp\u003eThe Merason DAC 2 is a fully balanced High-End D\/A converter in true dual-mono – Merason's most uncompromising statement on pure PCM conversion.\u003c\/p\u003e\u003cp\u003eIt's the evolution of the DAC 1 Mk II: two complete converters, a Class-A output without feedback, and an effort on circuit board, power supply and mechanics that leaves nothing to be desired. Hand-built in Switzerland, here in the warm champagne shade Cider.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 2?\u003c\/h2\u003e\u003cp\u003eTwo Burr-Brown PCM1794A chips work in true dual-mono – one complete chip per channel, for around 5 dB more dynamics and a wider, more stable soundstage. The discrete, fully balanced Class-A output stage runs entirely without feedback, twelve dedicated power supplies feed each section individually, and a new multilayer board with precision SMD keeps signal paths short. Belleville washers on the output transistors and damped feet keep heat and vibration in check.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eEverything the DAC 1 Mk II already does well – one step more consistent. A bigger stage, even more calm, more body, the last layer of the recording. Distortion below 0.006%, signal-to-noise ratio above 120 dB: the DAC 2 leaves hardly any question open, on the bench or in the room.\u003c\/p\u003e\u003ch3\u003eWho is the DAC 2 for?\u003c\/h3\u003e\u003cp\u003eFor the resolving top-tier system that wants to get the maximum out of PCM. Plain talk: the DAC 2 is also a pure converter – no volume control, no headphone amp, no DSD (PCM up to 192 kHz\/24 bit). You need a preamp or integrated amp with a high-level input. And the premium over the DAC 1 Mk II is significant: for most people, the Mk II is already the reference. The DAC 2 is for those who want the absolute last word, uncompromisingly – and can hear it in a direct comparison.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe DAC 2 is the crown of Merason's PCM converters. Whether the step up from the DAC 1 Mk II is worth it, you'll hear most honestly in a direct comparison at HD Zürisee in Wädenswil – that's exactly what our listening room is for.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, true dual-mono, fully balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown PCM1794A (one chip per channel), discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput stage:\u003c\/strong\u003e discrete, Class A, without feedback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB, AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA) – all galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3.5 V RMS, RCA unbalanced max. 1.75 V RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.006%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Cider\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason DAC 2 D\/A converter (Cider), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat sets the DAC 2 apart from the DAC 1 Mk II?\u003c\/h3\u003e\u003cp\u003eTrue dual-mono with one complete chip per channel, a Class-A output stage without feedback, a new multilayer board with more precision SMD, plus improved thermal and vibration management. In numbers: less distortion (\u0026lt; 0.006%) and a higher output level (3.5 V balanced).\u003c\/p\u003e\u003ch3\u003eDoes the DAC 2 play DSD, and do I need a preamp?\u003c\/h3\u003e\u003cp\u003eIt doesn't play DSD – the DAC 2 is designed for PCM up to 192 kHz\/24 bit. Since it deliberately does without volume control, you run it into a preamp or integrated amp with a high-level input.\u003c\/p\u003e\u003ch3\u003eIs the premium over the DAC 1 Mk II worth it?\u003c\/h3\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level. The DAC 2 is worth it if you have a correspondingly resolving chain and want the uncompromising maximum. The most honest answer comes from a direct comparison.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 2 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a converter of this class deserves advice at eye level. In Wädenswil, we compare the DAC 2 and DAC 1 Mk II on your own chain, match sources and cables, and deliver and install on site. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eA converter of this class wants an equally capable environment – a clean source, a good preamp, good cables: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101838238032,"sku":null,"price":11375.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-2-d-a-wandler-cider-frontansicht.png?v=1786524036"},{"product_id":"merason-dac-2-schwarz","title":"Merason DAC 2 D\/A Converter, Black","description":"\u003cp\u003eThe Merason DAC 2 is a fully balanced High-End D\/A converter in true dual-mono – Merason's most uncompromising statement on pure PCM conversion.\u003c\/p\u003e\u003cp\u003eIt's the evolution of the DAC 1 Mk II: two complete converters, a Class-A output without feedback, and an effort on circuit board, power supply and mechanics that leaves nothing to be desired. Hand-built in Switzerland, here in black.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 2?\u003c\/h2\u003e\u003cp\u003eTwo Burr-Brown PCM1794A chips work in true dual-mono – one complete chip per channel, for around 5 dB more dynamics and a wider, more stable soundstage. The discrete, fully balanced Class-A output stage runs entirely without feedback, twelve dedicated power supplies feed each section individually, and a new multilayer board with precision SMD keeps signal paths short. Belleville washers on the output transistors and damped feet keep heat and vibration in check.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eEverything the DAC 1 Mk II already does well – one step more consistent. A bigger stage, even more calm, more body, the last layer of the recording. Distortion below 0.006%, signal-to-noise ratio above 120 dB: the DAC 2 leaves hardly any question open, on the bench or in the room.\u003c\/p\u003e\u003ch3\u003eWho is the DAC 2 for?\u003c\/h3\u003e\u003cp\u003eFor the resolving top-tier system that wants to get the maximum out of PCM. Plain talk: the DAC 2 is also a pure converter – no volume control, no headphone amp, no DSD (PCM up to 192 kHz\/24 bit). You need a preamp or integrated amp with a high-level input. And the premium over the DAC 1 Mk II is significant: for most people, the Mk II is already the reference. The DAC 2 is for those who want the absolute last word, uncompromisingly – and can hear it in a direct comparison.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe DAC 2 is the crown of Merason's PCM converters. Whether the step up from the DAC 1 Mk II is worth it, you'll hear most honestly in a direct comparison at HD Zürisee in Wädenswil – that's exactly what our listening room is for.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, true dual-mono, fully balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown PCM1794A (one chip per channel), discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput stage:\u003c\/strong\u003e discrete, Class A, without feedback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB, AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA) – all galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3.5 V RMS, RCA unbalanced max. 1.75 V RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.006%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason DAC 2 D\/A converter (Black), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat sets the DAC 2 apart from the DAC 1 Mk II?\u003c\/h3\u003e\u003cp\u003eTrue dual-mono with one complete chip per channel, a Class-A output stage without feedback, a new multilayer board with more precision SMD, plus improved thermal and vibration management. In numbers: less distortion (\u0026lt; 0.006%) and a higher output level (3.5 V balanced).\u003c\/p\u003e\u003ch3\u003eDoes the DAC 2 play DSD, and do I need a preamp?\u003c\/h3\u003e\u003cp\u003eIt doesn't play DSD – the DAC 2 is designed for PCM up to 192 kHz\/24 bit. Since it deliberately does without volume control, you run it into a preamp or integrated amp with a high-level input.\u003c\/p\u003e\u003ch3\u003eIs the premium over the DAC 1 Mk II worth it?\u003c\/h3\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level. The DAC 2 is worth it if you have a correspondingly resolving chain and want the uncompromising maximum. The most honest answer comes from a direct comparison.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 2 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a converter of this class deserves advice at eye level. In Wädenswil, we compare the DAC 2 and DAC 1 Mk II on your own chain, match sources and cables, and deliver and install on site. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eA converter of this class wants an equally capable environment – a clean source, a good preamp, good cables: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101840466256,"sku":null,"price":11375.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-2-d-a-wandler-schwarz-frontansicht.png?v=1786524048"},{"product_id":"merason-dac-2-silber","title":"Merason DAC 2 D\/A Converter, Silver","description":"\u003cp\u003eThe Merason DAC 2 is a fully balanced High-End D\/A converter in true dual-mono – Merason's most uncompromising statement on pure PCM conversion.\u003c\/p\u003e\u003cp\u003eIt's the evolution of the DAC 1 Mk II: two complete converters, a Class-A output without feedback, and an effort on circuit board, power supply and mechanics that leaves nothing to be desired. Hand-built in Switzerland, here in silver.\u003c\/p\u003e\u003ch2\u003eWhy the DAC 2?\u003c\/h2\u003e\u003cp\u003eTwo Burr-Brown PCM1794A chips work in true dual-mono – one complete chip per channel, for around 5 dB more dynamics and a wider, more stable soundstage. The discrete, fully balanced Class-A output stage runs entirely without feedback, twelve dedicated power supplies feed each section individually, and a new multilayer board with precision SMD keeps signal paths short. Belleville washers on the output transistors and damped feet keep heat and vibration in check.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eEverything the DAC 1 Mk II already does well – one step more consistent. A bigger stage, even more calm, more body, the last layer of the recording. Distortion below 0.006%, signal-to-noise ratio above 120 dB: the DAC 2 leaves hardly any question open, on the bench or in the room.\u003c\/p\u003e\u003ch3\u003eWho is the DAC 2 for?\u003c\/h3\u003e\u003cp\u003eFor the resolving top-tier system that wants to get the maximum out of PCM. Plain talk: the DAC 2 is also a pure converter – no volume control, no headphone amp, no DSD (PCM up to 192 kHz\/24 bit). You need a preamp or integrated amp with a high-level input. And the premium over the DAC 1 Mk II is significant: for most people, the Mk II is already the reference. The DAC 2 is for those who want the absolute last word, uncompromisingly – and can hear it in a direct comparison.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe DAC 2 is the crown of Merason's PCM converters. Whether the step up from the DAC 1 Mk II is worth it, you'll hear most honestly in a direct comparison at HD Zürisee in Wädenswil – that's exactly what our listening room is for.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, true dual-mono, fully balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConverter:\u003c\/strong\u003e 2× Burr-Brown PCM1794A (one chip per channel), discrete I\/V stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput stage:\u003c\/strong\u003e discrete, Class A, without feedback\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e USB, AES\/EBU, Toslink (optical), S\/PDIF coaxial (RCA) – all galvanically isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR balanced max. 3.5 V RMS, RCA unbalanced max. 1.75 V RMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz – 20 kHz ± 0.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion (THD+N):\u003c\/strong\u003e \u0026lt; 0.006%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt; 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12 separate power supplies, 230 V \/ 50–60 Hz, approx. 30 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 10 × 29 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason DAC 2 D\/A converter (Silver), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat sets the DAC 2 apart from the DAC 1 Mk II?\u003c\/h3\u003e\u003cp\u003eTrue dual-mono with one complete chip per channel, a Class-A output stage without feedback, a new multilayer board with more precision SMD, plus improved thermal and vibration management. In numbers: less distortion (\u0026lt; 0.006%) and a higher output level (3.5 V balanced).\u003c\/p\u003e\u003ch3\u003eDoes the DAC 2 play DSD, and do I need a preamp?\u003c\/h3\u003e\u003cp\u003eIt doesn't play DSD – the DAC 2 is designed for PCM up to 192 kHz\/24 bit. Since it deliberately does without volume control, you run it into a preamp or integrated amp with a high-level input.\u003c\/p\u003e\u003ch3\u003eIs the premium over the DAC 1 Mk II worth it?\u003c\/h3\u003e\u003cp\u003eFor most systems, the DAC 1 Mk II is already reference level. The DAC 2 is worth it if you have a correspondingly resolving chain and want the uncompromising maximum. The most honest answer comes from a direct comparison.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason DAC 2 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a converter of this class deserves advice at eye level. In Wädenswil, we compare the DAC 2 and DAC 1 Mk II on your own chain, match sources and cables, and deliver and install on site. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eA converter of this class wants an equally capable environment – a clean source, a good preamp, good cables: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101843808592,"sku":null,"price":11375.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-dac-2-d-a-wandler-silber-frontansicht.png?v=1786525101"},{"product_id":"merason-mountain-dac","title":"Merason Mountain DAC, Silver","description":"\u003cp\u003eThe Merason Mountain DAC is the flagship D\/A converter of the Mountain Line – and the only Merason converter with native DSD.\u003c\/p\u003e\u003cp\u003eThe Mountain Line is Merason's reference class; the Mountain DAC is its digital heart. It translates music data with the utmost precision into a natural, finely resolved and exceptionally spacious soundstage. Hand-built in Switzerland, premiered at Axpona 2025.\u003c\/p\u003e\u003ch2\u003eWhy the Mountain DAC?\u003c\/h2\u003e\u003cp\u003eUnlike Reuss, DAC 1 Mk II and DAC 2, it processes not only PCM up to 192 kHz\/24 bit but also DSD64 and DSD128. At the XLR output it delivers 3.4 V, at RCA 1.7 V. A massive 18 kg housing, uncompromising mechanics – within the system it stands for precision, resolution and musical authority.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eDepth, resolution and a calm that makes music tangible in every nuance – close to the recording, close to the music. With the Mountain Pre and Mountain Power it forms a perfectly matched system, but it's also a statement on its own in any High-End chain.\u003c\/p\u003e\u003ch3\u003eWho is the Mountain DAC for?\u003c\/h3\u003e\u003cp\u003eFor the absolute top tier that wants the digital source without compromise. Plain talk: it's a pure D\/A converter with no volume control – you need a preamp (ideally the Mountain Pre) or an integrated amp with a high-level input. Big and heavy (45 × 14 × 39 cm, 18 kg): plan for floor space and a sturdy rack. And yes, this is flagship price territory.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Mountain DAC is the digital foundation for systems where the upgrading is meant to stop – with DSD as a bonus no other Merason offers. Which configuration makes sense for you is something we'll work out together at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D\/A converter, flagship of the Mountain Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput formats:\u003c\/strong\u003e PCM up to 192 kHz \/ 24 bit, DSD64, DSD128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e XLR 3.4 V RMS @ 0 dB, RCA 1.7 V RMS @ 0 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 14 × 39 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason Mountain DAC (Silver), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the Mountain DAC play DSD?\u003c\/h3\u003e\u003cp\u003eYes. Besides PCM up to 192 kHz\/24 bit, it processes DSD64 and DSD128 – it's the only Merason DAC with native DSD. Reuss, DAC 1 Mk II and DAC 2 are pure PCM converters.\u003c\/p\u003e\u003ch3\u003eDo I have to buy the complete Mountain chain?\u003c\/h3\u003e\u003cp\u003eNo. As a system of Mountain DAC, Pre and Power, the line is perfectly matched, but each unit can also be integrated individually into an existing High-End system. You run the Mountain DAC into a preamp or an integrated amp with a high-level input.\u003c\/p\u003e\u003ch3\u003eHow big and heavy is the unit?\u003c\/h3\u003e\u003cp\u003e45 × 14 × 39 cm at 18 kg – so plan for a sturdy rack and a bit of space. We're happy to take care of advice, setup and a listening session.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason Mountain DAC at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a flagship needs an environment on its own level. In Wädenswil we set up the Mountain chain for you to listen to, advise on system and placement, and deliver and install on site. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe Mountain DAC unfolds in an equally capable chain – source, preamp, cabling: \u003ca href=\"\/en-ch\/collections\/streamer\"\u003eStreamers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason Mountain Line\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101849051472,"sku":null,"price":19626.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-mountain-dac-d-a-wandler-silber-frontansicht.png?v=1786524079"},{"product_id":"merason-mountain-pre","title":"Merason Mountain Pre Preamplifier, Silver","description":"\u003cp\u003eThe Merason Mountain Pre is the line preamplifier of the Mountain Line – the control center of Merason's reference system.\u003c\/p\u003e\u003cp\u003eIt routes the signal with maximum transparency, stability and dynamics, forming the foundation for a coherent, musically balanced reproduction. Hand-built in Switzerland.\u003c\/p\u003e\u003ch2\u003eWhy the Mountain Pre?\u003c\/h2\u003e\u003cp\u003eIt sits between sources and power amp and determines how cleanly and dynamically the signal is passed on. Four inputs (2× RCA, 2× XLR), balanced and unbalanced outputs, 6 dB of gain. Within the system it provides the tonal composure that brings naturalness and structure together.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eOpenness, calm and an authoritative image – the Pre doesn't push itself into the foreground sonically, but lets the DAC and power amp work unrestrained. With the Mountain DAC and Mountain Power it creates an open, spacious, coherent soundstage.\u003c\/p\u003e\u003ch3\u003eWho is the Mountain Pre for?\u003c\/h3\u003e\u003cp\u003eFor the High-End chain that deserves an uncompromising preamp. Plain talk: it's a pure line preamp – you need a power amp to go with it (ideally the Mountain Power, but basically any high-quality power amp via RCA\/XLR). No DAC or phono stage is built in: digital runs through the Mountain DAC, vinyl through a separate phono stage. Big and heavy (20 kg) – plan for a sturdy rack.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Mountain Pre is the calm switching center of the Mountain Line – flexibility via four inputs, sound without a character of its own. What makes sense for your chain, we'll work out at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e preamplifier (line), Mountain Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2× RCA, 2× XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e RCA and XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 6 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 14 × 39 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason Mountain Pre preamplifier (Silver), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need a power amp to go with it?\u003c\/h3\u003e\u003cp\u003eYes. The Mountain Pre is a pure preamp and needs a power amp – ideally the Mountain Power, but basically any high-quality stereo power amp via RCA or XLR.\u003c\/p\u003e\u003ch3\u003eIs a DAC or phono stage built in?\u003c\/h3\u003e\u003cp\u003eNo. The Mountain Pre is a pure line preamp. For digital sources you pair it with the Mountain DAC, for a turntable with a separate phono stage.\u003c\/p\u003e\u003ch3\u003eHow many sources can I connect?\u003c\/h3\u003e\u003cp\u003eFour: two via RCA and two via XLR. On the output side you connect the power amp either balanced (XLR) or unbalanced (RCA), as you prefer.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason Mountain Pre at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a reference preamp belongs in a coherent system. In Wädenswil we listen through the Mountain combination with you, advise on sources and power amp, deliver, set up and install. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eA preamp lives off the rest of the chain – power amp, converter and cabling to go with it: \u003ca href=\"\/en-ch\/collections\/endstufen\"\u003ePower amps\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/dac\"\u003eDAC \u0026 D\/A converters\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason Mountain Line\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101871202640,"sku":null,"price":20160.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-mountain-pre-vorverstaerker-silber-frontansicht.png?v=1786524088"},{"product_id":"merason-mountain-power","title":"Merason Mountain Power Amplifier, Silver","description":"\u003cp\u003eThe Merason Mountain Power is the stereo power amplifier of the Mountain Line – the powerhouse of Merason's reference system.\u003c\/p\u003e\u003cp\u003eIt delivers power with authority, speed and composure, and drives even demanding loudspeakers with ease. Hand-built in Switzerland.\u003c\/p\u003e\u003ch2\u003eWhy the Mountain Power?\u003c\/h2\u003e\u003cp\u003eIt accepts the signal via RCA or XLR and delivers 2× 140 W into 8 ohms or 2× 260 W into 4 ohms – enough headroom to drive the vast majority of High-End loudspeakers with authority and calm. Its contribution to the system is a stable, controlled and expressive reproduction.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eControl instead of showmanship: bass arrives taut and defined, the soundstage stays stable even at volume, nothing ever turns hard or strained. Together with the Mountain DAC and Mountain Pre, the result is a precise, dynamic and yet natural soundstage.\u003c\/p\u003e\u003ch3\u003eWho is the Mountain Power for?\u003c\/h3\u003e\u003cp\u003eFor the top-tier chain with demanding loudspeakers. Plain talk: it's a pure power amp – nothing works without a preamp (ideally the Mountain Pre, otherwise any high-quality preamp via RCA\/XLR). At 22 kg it's the heaviest unit in the line: plan for a sturdy rack, space and room to breathe. This isn't about the highest wattage on paper, but about control and naturalness – if you're running extremely low-impedance or inefficient speakers, it's best to talk to us about it beforehand.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe Mountain Power drives even demanding speakers with authority, without ever shouting for attention. Whether the combination suits your speakers, we'll work out at HD Zürisee in Wädenswil.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e stereo power amplifier, Mountain Line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e RCA and XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 2× 260 W @ 4 ohms, 2× 140 W @ 8 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 45 × 14 × 39 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in Switzerland\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Merason Mountain Power amplifier (Silver), power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhich loudspeakers does the Mountain Power drive?\u003c\/h3\u003e\u003cp\u003eWith 2× 140 W into 8 ohms and 2× 260 W into 4 ohms, it has enough headroom for the vast majority of High-End loudspeakers. For very low-impedance or low-efficiency speakers, we'll check together whether the combination works.\u003c\/p\u003e\u003ch3\u003eDo I need a preamp?\u003c\/h3\u003e\u003cp\u003eYes. The Mountain Power is a pure power amp – ideally paired with the Mountain Pre, but basically with any high-quality preamp via RCA or XLR.\u003c\/p\u003e\u003ch3\u003eHow heavy and big is it?\u003c\/h3\u003e\u003cp\u003e45 × 14 × 39 cm at 22 kg – the heaviest unit in the Mountain Line. We'll gladly take care of delivery, setup and installation directly at your home if you wish.\u003c\/p\u003e\u003ch3\u003eWhy buy the Merason Mountain Power at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause a power amp and speakers have to match. In Wädenswil we listen to the Mountain Power with your speakers, advise on the whole chain, deliver, set up and install on site. Call us (044 680 22 00), write to us, or reach us on WhatsApp (\u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e, text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eA power amp is only as good as what's plugged into it on either side – loudspeakers, preamp, cables: \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003eLoudspeakers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/vorverstarker\"\u003ePreamplifiers\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables\u003c\/a\u003e · \u003ca href=\"\/en-ch\/collections\/merason\"\u003eMerason Mountain Line\u003c\/a\u003e\u003c\/p\u003e","brand":"Merason","offers":[{"title":"Default Title","offer_id":53101873529168,"sku":null,"price":19092.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/merason-mountain-power-endverstaerker-silber-frontansicht.png?v=1786524084"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/collections\/merason-dac-2-d-a-wandler-cider-frontansicht-kollektion.jpg?v=1788947378","url":"https:\/\/hdzuerisee.ch\/en-ch\/collections\/merason.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}