{"title":"Speaker Stands","description":"\u003cp\u003eSpeaker stands are the base for bookshelf speakers, bringing them to the right height and decoupling them from the floor with low resonance.\u003c\/p\u003e\u003cp\u003eSounds unspectacular, but it's audible: a good stand isn't furniture, it's part of the speaker.\u003c\/p\u003e\u003cp\u003eOur principle: we sell speaker stands in pairs, and the price shown is the price per pair. The few models only available singly are marked in the title with (each).\u003c\/p\u003e\u003ch2\u003eWhy the stand is part of the sound\u003c\/h2\u003e\u003cp\u003eThe right height for the ear, clean decoupling from the floor and stability, so the diaphragm does the work and not the cabinet. Only on the right stand does a bookshelf speaker show what it can do: precise imaging, a stable soundstage and a well-defined bass.\u003c\/p\u003e\u003ch2\u003eWhat matters\u003c\/h2\u003e\u003cp\u003eHeight at ear level while seated, sufficient load capacity and footprint, plus the question of filling or coupling. Which stand suits your speakers and your floor is something we're happy to work out in person at HD Zürisee in Wädenswil, with an honest recommendation instead of an off-the-shelf standard.\u003c\/p\u003e\u003ch3\u003eWho are speaker stands for? (Straight talk)\u003c\/h3\u003e\u003cp\u003eFor anyone with bookshelf or compact speakers who wants to get the maximum out of their boxes. Straight talk: leave a good box on the sideboard or shelf and you're audibly giving away sound. The stand is the cheapest upgrade with the biggest effect per franc.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eSpeaker stands are the most unassuming and at the same time most effective accessory for bookshelf speakers. Tell us your speaker model and how you sit, and we'll find the stand that carries the sound instead of just putting it down.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the price apply per pair or per single stand?\u003c\/h3\u003e\u003cp\u003eWith us, the price shown applies to a pair, so two stands. That's the normal case, because bookshelf speakers stand in pairs. The few exceptions only available singly, such as the stands for the Cabasse The Pearl, carry the note (each) in the title. The sales unit is also stated for each product in the technical data.\u003c\/p\u003e\u003ch3\u003eWhat height is right for a speaker stand?\u003c\/h3\u003e\u003cp\u003eSo that the tweeter sits roughly at ear height while seated – that's the key to clean treble and a coherent soundstage. Depending on the speaker and sofa, that's usually 60 to 80 cm. Tell us your speaker model, and we'll work out the right stand height for you.\u003c\/p\u003e\u003ch3\u003eShould I fill the stand or couple it?\u003c\/h3\u003e\u003cp\u003eDepending on the model, it can make sense: filling with sand or granulate increases mass and settles the cabinet, spikes couple the stand firmly to the floor. Both reduce resonance and make the bass more precise. We'll show you what helps with your stand and floor.\u003c\/p\u003e\u003ch3\u003eDoes every stand fit my speakers?\u003c\/h3\u003e\u003cp\u003eNo, footprint, height and load capacity have to match the speaker so it stands safely and with low resonance. A plate too small under a large speaker wobbles, one too tall pushes the tweeter above ear level. Tell us your model, and we'll recommend the right base.\u003c\/p\u003e\u003ch3\u003eDoes a good stand really make an audible difference?\u003c\/h3\u003e\u003cp\u003eYes, and more than many think. A stable, correctly high stand decouples the speaker from the floor and brings the tweeter to ear height, which sharpens imaging, soundstage and bass. Straight talk: the most expensive bookshelf speaker on a wobbly sideboard gives away part of its sound.\u003c\/p\u003e\u003ch3\u003eWhy buy speaker stands from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause the right stand depends on the speaker, seating height and floor, exactly the details you can't see at a glance online. We recommend to match your speakers and set everything up on-site on request. Personal advice on Lake Zürich in Wädenswil, with no sales pressure.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does the price apply per pair or per single stand?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"With us, the price shown applies to a pair, so two stands. That's the normal case, because bookshelf speakers stand in pairs. The few exceptions only available singly, such as the stands for the Cabasse The Pearl, carry the note (each) in the title. The sales unit is also stated for each product in the technical data.\"}}, {\"@type\": \"Question\", \"name\": \"What height is right for a speaker stand?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"So that the tweeter sits roughly at ear height while seated – that's the key to clean treble and a coherent soundstage. Depending on the speaker and sofa, that's usually 60 to 80 cm. Tell us your speaker model, and we'll work out the right stand height for you.\"}}, {\"@type\": \"Question\", \"name\": \"Should I fill the stand or couple it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Depending on the model, it can make sense: filling with sand or granulate increases mass and settles the cabinet, spikes couple the stand firmly to the floor. Both reduce resonance and make the bass more precise. We'll show you what helps with your stand and floor.\"}}, {\"@type\": \"Question\", \"name\": \"Does every stand fit my speakers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, footprint, height and load capacity have to match the speaker so it stands safely and with low resonance. A plate too small under a large speaker wobbles, one too tall pushes the tweeter above ear level. Tell us your model, and we'll recommend the right base.\"}}, {\"@type\": \"Question\", \"name\": \"Does a good stand really make an audible difference?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, and more than many think. A stable, correctly high stand decouples the speaker from the floor and brings the tweeter to ear height, which sharpens imaging, soundstage and bass. Straight talk: the most expensive bookshelf speaker on a wobbly sideboard gives away part of its sound.\"}}, {\"@type\": \"Question\", \"name\": \"Why buy speaker stands from HD Zürisee?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Because the right stand depends on the speaker, seating height and floor, exactly the details you can't see at a glance online. We recommend to match your speakers and set everything up on-site on request. Personal advice on Lake Zürich in Wädenswil, with no sales pressure.\"}}]}\u003c\/script\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the matching boxes at the \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e, larger alternatives at the \u003ca href=\"\/en-ch\/collections\/standlautsprecher\"\u003efloorstanding speakers\u003c\/a\u003e. The whole selection is in the \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeaker overview\u003c\/a\u003e, the right connection is at the \u003ca href=\"\/en-ch\/collections\/kabel\"\u003ecables\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"cabasseakoyastandbl","title":"Cabasse The Pearl Akoya Speaker Stand, Black (Each)","description":"\u003cp\u003eThe Cabasse The Pearl Akoya Speaker Stand in Black is a single stand made of aluminium and steel that brings the spherical Akoya up to 70 centimetres of listening height.\u003c\/p\u003e\n\u003cp\u003eCabasse didn't just source it from somewhere else – it's designed for this exact speaker: two slim, round columns on a solid steel base, finished in matte black, with all cables routed inside. One detail up front, because it regularly causes questions on our end – the stand comes as a single unit, not as a pair. For stereo, you need two.\u003c\/p\u003e\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eThe Akoya is a sphere with a coaxial driver. It sounds most balanced when its centre sits roughly at ear height and nothing in the immediate surroundings resonates along with it. A sideboard rarely delivers either: it usually sits too low and doubles as a resonating board.\u003c\/p\u003e\n\u003cp\u003eThis stand solves that without any tinkering. 70 centimetres of height, a round steel base 25 centimetres in diameter as a counterweight, and round rather than angular columns, on which hard reflections don't even get a chance to form. Because the columns are hollow, power cables – and Ethernet or RCA cables if needed – disappear invisibly downward. A matching power cable is included, as is the complete mounting hardware including an Allen key.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-fit floor stand, exclusively for the Cabasse The Pearl Akoya\u003c\/li\u003e\n\u003cli\u003e70 cm height – the speaker sits at roughly ear height while seated\u003c\/li\u003e\n\u003cli\u003eAluminium columns on a solid steel base, matte black finish\u003c\/li\u003e\n\u003cli\u003eInternal cable routing through both columns\u003c\/li\u003e\n\u003cli\u003eSpikes and rubber feet for parquet, tile or carpet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho is the Akoya stand for?\u003c\/h3\u003e\n\u003cp\u003eFor you, if the Akoya should stand freely in the room and you want to sort out height, stability and cable clutter in one go. Also if your sideboard is actually too low but you'd rather not rebuild it.\u003c\/p\u003e\n\u003cp\u003eStraight talk: if you're hanging the Akoya on the wall anyway, the matching wall mount is more space-saving and flexible. And if you listen to two Akoya in stereo, plan for two stands right away – the box contains one.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAccessory you don't need to debate for long. The stand is heavy enough to genuinely calm the Akoya, discreet enough not to draw attention in the room, and finished cleanly enough that it doesn't feel like a compromise next to a speaker of this calibre. Hand on heart: a good speaker at half height behind the fruit bowl is simply a waste.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: floor stand for Cabasse The Pearl Akoya\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 piece (single stand) – the price shown is per stand\u003c\/li\u003e\n\u003cli\u003eHeight: 70 cm\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 25 × 70 × 25 cm (round base, Ø 25 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium columns, steel base\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eCable routing: internal, through both stand columns\u003c\/li\u003e\n\u003cli\u003eFloor contact: spikes or rubber feet\u003c\/li\u003e\n\u003cli\u003eCompatibility: exclusively for Cabasse The Pearl Akoya (speaker weight 8 kg)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: column, base, power cable, spikes, rubber feet, mounting screws, Allen key, tweezers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the stand come as a single unit or a pair?\u003c\/h3\u003e\n\u003cp\u003eSingle unit. Cabasse sells the Akoya stand per piece – matching the fact that the speaker itself is also offered singly. If you run two Akoya in stereo, you accordingly need two stands. That way you only pay for what you actually set up.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit the larger The Pearl?\u003c\/h3\u003e\n\u003cp\u003eNo. This stand is built exclusively for the Cabasse The Pearl Akoya, and its cradle is matched to that model's sphere diameter. The Pearl has its own, larger stand. We'd advise against modifying it for other spherical speakers – standing stability isn't a detail here.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. Both stand columns are hollow, and you route the power cable – and an Ethernet or RCA cable if needed – down through the inside. Cabasse even includes a matching power cable and a pair of tweezers for threading it. In the end, only the short stretch between base and wall socket stays visible.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Akoya stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you beforehand whether a stand or a wall mount is the better solution for your room, and how many you actually need. HD Zürisee in Wädenswil is an authorised dealer, and our technician Mauri handles delivery and assembly on request. Call us on +41 44 680 22 00, email shop@hdzuerisee.ch, or reach us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore models can be found among our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, the matching speaker in our range of \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, and mounts and small parts under \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Cabasse","offers":[{"title":"Default Title","offer_id":52989493018960,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/cabasse-the-pearl-akoya-lautsprecher-staender-schwarz-frontansicht.jpg?v=1785445965"},{"product_id":"cabasseakoyastandwh","title":"Cabasse The Pearl Akoya Speaker Stand, White (Each)","description":"\u003cp\u003eThe Cabasse The Pearl Akoya Speaker Stand in White is a 70-centimetre-tall single stand that places the spherical Akoya freely in the room at listening height.\u003c\/p\u003e\n\u003cp\u003eFinished in Pearl White, it recedes visually in bright rooms while the sphere on top keeps the stage. That doesn't make it lightweight construction, though: two hollow aluminium columns on a solid steel base, 6.4 kilograms together. And because Cabasse offers the Akoya piece by piece, the same goes for the stand – one box, one stand.\u003c\/p\u003e\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eA spherical speaker reacts sensitively to what it stands on. If the Akoya sits on a shelf, every bass movement travels into the furniture front, and the sound becomes thicker than it should be. This stand's steel base absorbs that energy instead of passing it on.\u003c\/p\u003e\n\u003cp\u003eThen there's the height: 70 centimetres puts the sphere roughly at ear height while seated – exactly where the Akoya's coaxial driver plays to its strengths. Both stand tubes are hollow, and power, network or RCA cables run down inside. On a speaker that lives off its clean shape, that's more than cosmetics. A matching power cable is included, along with screws, an Allen key and a pair of tweezers for threading the cables.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFloor stand matched exactly to the Cabasse The Pearl Akoya\u003c\/li\u003e\n\u003cli\u003eFinish in Pearl White, unobtrusive in bright living rooms\u003c\/li\u003e\n\u003cli\u003eRound aluminium columns, solid steel base with a 25 cm diameter\u003c\/li\u003e\n\u003cli\u003eConcealed cable routing through both columns, power cable included\u003c\/li\u003e\n\u003cli\u003eInterchangeable spikes and rubber feet depending on floor covering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho is the Akoya stand in White for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone taking a white or light-coloured Akoya to its logical conclusion, rather than balancing it on a dark base. Equally for rooms without suitable furniture at the right height.\u003c\/p\u003e\n\u003cp\u003eHonestly: in a room where the speaker is going on the wall anyway, the wall mount is the clearer answer. And if you listen with two Akoya, plan for two stands – this comes as one per order.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe stand does exactly what good accessories should: it doesn't draw attention, yet handles three things at once – height, calm, cables gone. In white it practically disappears in bright rooms, which makes it the obvious choice for the white Akoya. Honestly, the speaker has earned this stage.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: floor stand for Cabasse The Pearl Akoya\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 piece (single stand) – the price shown is per stand\u003c\/li\u003e\n\u003cli\u003eHeight: 70 cm\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 25 × 70 × 25 cm (round base, Ø 25 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.4 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium columns, steel base\u003c\/li\u003e\n\u003cli\u003eFinish: Pearl White\u003c\/li\u003e\n\u003cli\u003eCable routing: internal, through both stand columns\u003c\/li\u003e\n\u003cli\u003eFloor contact: spikes or rubber feet\u003c\/li\u003e\n\u003cli\u003eCompatibility: exclusively for Cabasse The Pearl Akoya (speaker weight 8 kg)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: column, base, power cable, spikes, rubber feet, mounting screws, Allen key, tweezers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow high does the Akoya sit on this stand?\u003c\/h3\u003e\n\u003cp\u003eThe cradle sits at 70 centimetres, plus the sphere itself. Seated, that puts the driver centre roughly at ear height – the height Cabasse tuned the Akoya for. You typically won't reach that on a low sideboard.\u003c\/p\u003e\n\u003ch3\u003eWhat speakers is this stand made for?\u003c\/h3\u003e\n\u003cp\u003eExclusively for the Cabasse The Pearl Akoya at 8 kilograms. Both the cradle and the cable routing are tailored to its spherical shape and connections. For the larger The Pearl model, Cabasse offers its own, sturdier stand. Other spherical speakers can't be mounted on it securely.\u003c\/p\u003e\n\u003ch3\u003eDo I get one stand or two?\u003c\/h3\u003e\n\u003cp\u003eOne. Cabasse supplies the Akoya stand as a single unit, not as a pair – unlike many classic bookshelf-speaker stands. If you run two Akoya in stereo, you order two stands. Just tell us how many speakers you're setting up, and we'll work it out with you.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand stand securely on parquet?\u003c\/h3\u003e\n\u003cp\u003eYes. Both spikes and rubber feet are included; you choose according to your floor covering. On parquet and tile, use the rubber feet; on carpet, the spikes. At 6.4 kilograms of dead weight, the base stands calmly regardless.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Akoya stand in White at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause for over two decades we've seen which setups work in everyday life and which only look good on paper. We work through room, height and cable routing with you before you order. Get in touch on +41 44 680 22 00, on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind the matching speaker under \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, alternatives among the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and wall mounts under \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Cabasse","offers":[{"title":"Default Title","offer_id":52989493051728,"sku":null,"price":349.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/cabasse-the-pearl-akoya-lautsprecher-staender-weiss-frontansicht.jpg?v=1785445965"},{"product_id":"cabassepearlstandbl","title":"Cabasse The Pearl Speaker Stand, Black (Each)","description":"\u003cp\u003eThe Cabasse The Pearl speaker stand in matte black is the purpose-built floor stand for the Cabasse The Pearl – an aluminium structure on a steel base, 84 cm tall. It raises the sound sphere exactly where it belongs, and swallows the cables along with it. That it also looks good doing what would otherwise end up as cable clutter behind the sideboard is a bonus you'll happily take.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eThe Pearl radiates in all directions, and that's exactly why the height isn't a matter of taste. At 84 cm the coaxial system sits at ear height when you're in your armchair – the soundstage detaches from the sphere instead of sticking to the floor. The combination of aluminium structure and steel base weighs in at 15 kg and keeps the construction steady, even when the Pearl gets serious in the bass.\u003c\/p\u003e\n\u003cp\u003eA sideboard can rarely do that. It resonates, it reflects, and it's almost never at the right height.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFloor stand, built exclusively for the Cabasse The Pearl\u003c\/li\u003e\n\u003cli\u003e84 cm setup height – listening height while seated, no compromise\u003c\/li\u003e\n\u003cli\u003eAluminium structure on steel base, 15 kg own weight\u003c\/li\u003e\n\u003cli\u003eCable routing hidden inside both stand tubes\u003c\/li\u003e\n\u003cli\u003eDecoupling spikes for carpet, soft rubber feet for hard floors\u003c\/li\u003e\n\u003cli\u003eMatte black finish, matched to the Pearl in black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the Pearl stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who places the Pearl freestanding in the room and takes it seriously. Bottom line: if you already have a solid piece of furniture at around 80 cm height, you can get by without it – the stand isn't a sonic miracle, it's the foundation that doesn't ruin the quality that's already there. If you'd rather mount the Pearl on the wall, or have little floor space, the wall mount suits you better. And for the smaller spheres in the family – Akoya, Myuki, Keshi – it doesn't fit: Cabasse offers its own items for those.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand that looks like a piece of furniture and works like a foundation. 15 kg, cable channels in both tubes, cleanly made – Cabasse hasn't cut corners on the accessories here. We at HD Zürisee in Wädenswil rarely set the Pearl up any other way, and there's a reason for that: on the right stand it comes across more assured than a 33 cm sphere would suggest.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Floor stand for active speakers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e exclusively for Cabasse The Pearl (not for Pearl Akoya, Myuki, Keshi or Pelegrina)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 84 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 38 × 84 × 38 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase:\u003c\/strong\u003e Steel, footprint 38 × 38 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStructure:\u003c\/strong\u003e Aluminium, with concealed cable routing in both stand tubes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Matte black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 piece (single stand) – the price shown is per stand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e stand disassembled, mounting hardware and instructions, decoupling spikes for carpet, soft rubber feet for hard floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow tall is the Cabasse The Pearl stand?\u003c\/h3\u003e\n\u003cp\u003eThe stand is 84 cm tall, and the steel base has a footprint of 38 × 38 cm. At this height, the Pearl's coaxial system plays roughly at ear level while seated, which gives the imaging noticeably more air than placing it on a low sideboard or even on the floor.\u003c\/p\u003e\n\u003ch3\u003eWhich Cabasse models does this stand fit?\u003c\/h3\u003e\n\u003cp\u003eExclusively the Cabasse The Pearl. For the smaller Pearl Akoya, Cabasse offers its own stand at 70 cm height and 6.4 kg weight, and Myuki, Keshi and Pelegrina each have their own solutions too. The items carry separate part numbers and can't be swapped between models.\u003c\/p\u003e\n\u003ch3\u003eDo I get one stand or two?\u003c\/h3\u003e\n\u003cp\u003eYou get one stand. Cabasse sells the Pearl stand individually, not as a pair – which matches the fact that the Pearl itself is a single speaker. So if you're building a stereo pair from two Pearls, you need two stands and order this item twice.\u003c\/p\u003e\n\u003ch3\u003eHow are the cables routed?\u003c\/h3\u003e\n\u003cp\u003eThrough the stand tubes. Both tubes have integrated cable routing, so nothing is visible from the speaker down to the floor. Since the Pearl is active and only needs power plus, optionally, a network cable, the wiring stays minimal anyway – the stand simply makes it invisible.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Cabasse The Pearl stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we treat speaker and setup as one topic. Our team knows the Pearl from everyday use and tells you honestly whether a stand or a wall mount suits your room better. Plus delivery and on-site installation, our technician Mauri in-house, and advice by phone, WhatsApp or email.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind the matching speaker and the whole sphere family in our \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, models for other compact speakers in our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and everything around setup and cabling in our \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e. Not sure between stand and wall mount? Call us on +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or email shop@hdzuerisee.ch – tell us briefly about your room, we'll take it from there.\u003c\/p\u003e","brand":"Cabasse","offers":[{"title":"Default Title","offer_id":52989495017808,"sku":null,"price":449.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/cabasse-the-pearl-lautsprecher-staender-schwarz-frontansicht.jpg?v=1785445965"},{"product_id":"cabassepearlstandwh","title":"Cabasse The Pearl Speaker Stand, White (Each)","description":"\u003cp\u003eThe Cabasse The Pearl speaker stand in matte white is the factory-made floor stand for the Cabasse The Pearl and sets the sound sphere at 84 cm height. Aluminium structure, a steel base, 15 kg total weight – and the cables disappear inside the tube. In bright rooms, the white finish is the more discreet route: it steps back and lets the Pearl own the stage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eA speaker that radiates in all directions is sensitive to its surroundings. If the Pearl sits too low, too close to a surface, or on a hollow piece of furniture, it loses exactly what you bought it for: the free, cabinet-detached imaging. The 84 cm brings the coaxial system to ear height, and the 15 kg makes sure the stand doesn't resonate along with it, but instead channels energy into the floor.\u003c\/p\u003e\n\u003cp\u003eSoft rubber feet are included for hard floors, decoupling spikes for carpet. Mounting hardware and instructions are included, and the whole thing is assembled in a few minutes.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitted floor stand for the Cabasse The Pearl\u003c\/li\u003e\n\u003cli\u003e84 cm setup height for the listening position while seated\u003c\/li\u003e\n\u003cli\u003eAluminium structure on steel base, 15 kg\u003c\/li\u003e\n\u003cli\u003eConcealed cable routing in both stand tubes\u003c\/li\u003e\n\u003cli\u003eSpikes and rubber feet for carpet or parquet\u003c\/li\u003e\n\u003cli\u003eMatte white finish, matched to the Pearl in white\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is the white stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor bright living spaces, where a black stand would look out of place. Honestly, that's the main difference from the black version – technically the two are identical. It's the wrong purchase if you're planning to wall-mount the Pearl anyway, or if you already have a sturdy piece of furniture at the right height. And it doesn't fit the smaller models in the Pearl family – Akoya, Myuki and Keshi have their own stands and mounts.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAccessories that are usually dismissed as an afterthought – here, it's part of the design. If you buy the Pearl and then set it on a chest of drawers, you're giving away a good part of what you chose it for. At HD Zürisee in Wädenswil we rarely advise against it. Unless you genuinely have the right piece of furniture already – then we'll tell you that too.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Floor stand for active speakers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e exclusively for Cabasse The Pearl (not for Pearl Akoya, Myuki, Keshi or Pelegrina)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 84 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 38 × 84 × 38 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase:\u003c\/strong\u003e Steel, footprint 38 × 38 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStructure:\u003c\/strong\u003e Aluminium, with concealed cable routing in both stand tubes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Matte white\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 piece (single stand) – the price shown is per stand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e stand disassembled, mounting hardware and instructions, decoupling spikes for carpet, soft rubber feet for hard floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Cabasse The Pearl stand made of?\u003c\/h3\u003e\n\u003cp\u003eAluminium and steel. The load-bearing structure with the two stand tubes is made of aluminium, and the base is steel, measuring 38 × 38 cm. Together that adds up to 15 kg of own weight – enough mass that the stand doesn't start working against the Pearl.\u003c\/p\u003e\n\u003ch3\u003eIs the stand compatible with the Pearl Akoya?\u003c\/h3\u003e\n\u003cp\u003eNo. Cabasse offers a separate, smaller stand for the Pearl Akoya at 70 cm height and 6.4 kg weight. The stand offered here, at 84 cm and 15 kg, is designed for the larger The Pearl. Both items carry separate part numbers and cannot be swapped.\u003c\/p\u003e\n\u003ch3\u003eIs the stand delivered individually or as a pair?\u003c\/h3\u003e\n\u003cp\u003eIndividually. One item equals one stand, since the The Pearl itself is a single active speaker and is sold per piece. For a stereo setup with two Pearls, you simply add this item to your cart twice. The sales unit is also stated in the technical data.\u003c\/p\u003e\n\u003ch3\u003eWhat's included in delivery?\u003c\/h3\u003e\n\u003cp\u003eThe stand is delivered disassembled, together with mounting hardware and instructions. It also comes with decoupling spikes for carpeted floors and soft rubber feet for hard floors like parquet or stone. The speaker itself is not included – it's sold separately.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Pearl stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause with us you get the whole chain, not just an accessory. Our seasoned team advises you on placement, room acoustics and cabling, and Mauri handles installation and service on site. Get in touch by phone, WhatsApp or email – we'll sort it out in five minutes.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching Cabasse and the rest of the range are waiting in our \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e. Looking for stands for other compact speakers? You'll find them in our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e; cables, spikes and small parts are in our \u003ca href=\"\/en-ch\/collections\/zubehor\"\u003eaccessories\u003c\/a\u003e. Questions about placement? Phone +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch – tell us about your setup, and we'll help you place it.\u003c\/p\u003e","brand":"Cabasse","offers":[{"title":"Default Title","offer_id":52989495083344,"sku":null,"price":449.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/cabasse-the-pearl-lautsprecher-staender-weiss-frontansicht.jpg?v=1785457400"},{"product_id":"daliconnectm601","title":"DALI Connect E-601 Speaker Stands, Black (Pair)","description":"\u003cp\u003eThe DALI Connect E-601 is a pair of speaker stands from Denmark – with an extruded aluminium column, silk-matte lacquered glass base plate and full internal cable routing, built for bookshelf and compact speakers.\u003c\/p\u003e\n\u003cp\u003eThe E-601 brings your bookshelf speakers up to the right height and decouples them from the floor. The glass plate at the base provides a wide, stable footprint, the aluminium column takes the cable completely out of sight, and the lacquered metal top plate carries the speaker. That way the speaker sits calmly, instead of vibrating along with a resonant sideboard.\u003c\/p\u003e\n\u003ch2\u003eWhy the Connect E-601?\u003c\/h2\u003e\n\u003cp\u003eBecause even the best bookshelf speaker doesn't achieve much sitting on a vibrating piece of furniture. A solid, decoupled stand settles the cabinet, sharpens the imaging and brings the tweeter up to ear height – the point where the soundstage and sense of space fall into place. The 30-millimetre cable ports in the base plate and column keep everything looking tidy; even a mains cable for active speakers still fits through.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of stands in black – high-gloss column, silk-matte glass – including adjustable spikes for carpet, rubber feet for hard floors, and adhesive and anti-slip pads for the top plate. The mounting plate measures 148 × 198 millimetres. The E-601 is designed for DALI bookshelf speakers – Spektor, Oberon, Menuet, Opticon or Rubicon – and for other compact speakers that sit securely on this surface. At HD Zürisee in Wädenswil we'll work out with you whether your speaker is a good match and how high it should ultimately stand.\u003c\/p\u003e\n\u003ch3\u003eWho is the Connect E-601 suitable for?\u003c\/h3\u003e\n\u003cp\u003eLet's be clear: the E-601 is designed for compact and bookshelf speakers. The speaker isn't bolted on but placed on adhesive and anti-slip pads, and the column is designed for cable routing – DALI doesn't intend it to be filled with sand or granulate. For full-size, heavy studio monitors you're better off with a more substantial stand. And the spikes belong on carpet: on bare parquet they'll dig in mercilessly, so use the supplied rubber feet there instead.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA cleanly made stand with no fuss: glass at the bottom, aluminium in the middle, cable out of sight. At 3.2 kilos each it's no heavyweight – but it looks considerably better in a living room than most steel-tube alternatives and does exactly what it should with compact speakers. If you value mass above all else, go for the heavier specialist; if you want a good-looking, calm setup, you're in the right place.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for bookshelf and compact speakers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 602 × 260 × 320 mm with spikes (height without spikes 587 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop plate (mounting plate):\u003c\/strong\u003e 148 × 198 mm, lacquered metal with adhesive surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase plate:\u003c\/strong\u003e glass, silk-matte lacquered, 260 × 320 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn:\u003c\/strong\u003e extruded aluminium, high-gloss lacquered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable routing:\u003c\/strong\u003e internal, Ø 30 mm ports in base plate and column\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor coupling:\u003c\/strong\u003e height-adjustable spikes (carpet) or rubber feet (hard floors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.2 kg per stand (pair approx. 6.4 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black (column high-gloss, glass silk-matte)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e DALI bookshelf speakers such as Spektor, Oberon, Menuet, Opticon and Rubicon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e the speaker isn't bolted on but placed on pads; the column isn't intended to be filled with sand or granulate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2 stands (2 glass base plates, 2 aluminium columns, 2 top plates, 2 mounting rods with screws), 8 spikes, 8 rubber feet, 8 anti-slip pads, 8 double-sided adhesive pads, 2 end caps, mounting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers does the Connect E-601 fit?\u003c\/h3\u003e\n\u003cp\u003eBookshelf and compact speakers. The mounting plate measures 148 × 198 millimetres, and the speaker should sit securely on it. DALI models such as Spektor, Oberon, Menuet, Opticon or Rubicon are the typical candidates. It isn't bolted on – the speaker sits on the supplied adhesive pads. It isn't designed for very large, heavy monitors.\u003c\/p\u003e\n\u003ch3\u003eSpikes or rubber feet – which do I use?\u003c\/h3\u003e\n\u003cp\u003eOn carpet, use the spikes: they pierce the pile and grip the floor. On parquet or strip flooring, use the supplied rubber feet so nothing gets scratched. Both are included, and both can be finely adjusted for levelling – important so the stand doesn't wobble in the end.\u003c\/p\u003e\n\u003ch3\u003eDoes the speaker cable really disappear into the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. The base plate and column have 30-millimetre ports, and the cable runs from the top plate down to the floor on the inside. Even a mains cable for active speakers fits. That keeps things looking clean and keeps the cable out of reach of the vacuum cleaner and the cat.\u003c\/p\u003e\n\u003ch3\u003eHow high does the speaker sit on the E-601?\u003c\/h3\u003e\n\u003cp\u003eThe stand measures 602 millimetres with spikes, 587 without. Together with a typical compact speaker, that puts the tweeter roughly at ear height when you're sitting on a normal sofa. If you sit lower or higher, that shifts – we're happy to work it out with you.\u003c\/p\u003e\n\u003ch3\u003eDo I get one or two stands with the E-601?\u003c\/h3\u003e\n\u003cp\u003eTwo. The Connect E-601 is sold as a pair, and one box contains both stands plus mounting hardware – that's also how DALI's mounting instructions describe it. Included are eight spikes, eight rubber feet, and adhesive and anti-slip pads – enough for both sides. So you only need one order for both sides.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the DALI Connect E-601 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the right stand turns a good speaker into a very good one – and after almost three decades in the business, we know where the difference lies. As an authorised DALI dealer we'll give you honest advice, deliver, and set it up on site if you'd like. Reach us on 044 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching compact speakers under \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf speakers\u003c\/a\u003e, and the cable for the run through the column under \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003eSpeaker cables\u003c\/a\u003e. More models are shown in the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker stands\u003c\/a\u003e overview, and you'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/dali\"\u003eDALI\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"DALI","offers":[{"title":"Default Title","offer_id":52989502423376,"sku":null,"price":258.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dali-connect-e-601-lautsprecherstaender-schwarz-schraegansicht.png?v=1785848886"},{"product_id":"eposstandfuss","title":"Epos ES-14N Speaker Stand (Pair)","description":"\u003cp\u003eThe Epos stand is a speaker stand developed specifically for the Epos ES-14N stand-mount speaker, joining box and floor into one unit.\u003c\/p\u003e\n\u003cp\u003eIt brings the ES-14N up to the acoustically correct height, couples it to the floor via adjustable spikes, and bolts directly to the speaker through four pre-drilled holes. Not a nice accessory, then, but part of the tuning. Supplied as a pair.\u003c\/p\u003e\n\u003ch2\u003eWhy the original stand?\u003c\/h2\u003e\n\u003cp\u003eBecause Karl-Heinz Fink designed it together with the ES-14N – taking a different route than half the industry. The column isn't a steel tube but a laminated wood beam made of four glued layers, joined with the same damping adhesive used in the speaker cabinet itself. The top plate consists of two steel plates with a layer of bitumen in between, the base plate of thick steel. Wood damps, steel calms, bitumen swallows the rest.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of stands at 515 millimetres in height – exactly the height at which the ES-14N's tweeter lands at ear level while seated and the soundstage locks in. Four aligned holes in the top plate turn speaker and stand into a mechanical unit, instead of simply sitting one on top of the other. Height-adjustable spikes sit in the steel base plate, so you can level out even an uneven old parquet floor.\u003c\/p\u003e\n\u003ch3\u003eWho is the stand right for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: if you own an ES-14N, this is the wrong place to save money. A sideboard reliably turns a very good monitor into a mediocre one. Third-party stands around 55 centimetres also work according to Epos, but skip the fixed bolted connection. For other stand-mount speakers, the stand is only a partial fit, since its height and bolt pattern are calculated for the ES-14N. And if you're after a sand-filled heavyweight fortress, look elsewhere: this stand works with damping, not tonnage.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most consistent foundation the ES-14N can get – and one of the few stands you can genuinely regard as part of the speaker. Set it perfectly level, lock the spikes in place, and put coasters under the tips on parquet flooring. At HD Zürisee in Wädenswil we'll mount the pair correctly for you on request and advise you on placement in the room.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for Epos ES-14N, sold in pairs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColumn:\u003c\/strong\u003e laminated wood beam of four glued wood layers, same damping adhesive as in the ES-14N cabinet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTop plate:\u003c\/strong\u003e double-layer steel with a bitumen interlayer, four aligned holes for bolting to the speaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase plate:\u003c\/strong\u003e thick steel, holds the adjustable spikes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 515 mm (manufacturer's figure)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e approx. 33 × 51.5 × 40 cm (plate dimensions not published by the manufacturer)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e not published by the manufacturer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFloor coupling:\u003c\/strong\u003e height-adjustable spikes in the base plate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFilling:\u003c\/strong\u003e not intended, the column is solid\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2 stands (pair), adjustable spikes, mounting hardware to connect with the speaker, self-adhesive silicone pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Epos stand only fit the ES-14N, or other stand-mount speakers too?\u003c\/h3\u003e\n\u003cp\u003eIt's calculated for the ES-14N and only fully makes sense there. The top plate's height and bolt pattern are matched to this speaker. You can place another stand-mount speaker on it, but not bolt it on – the fixed mechanical unit of box and stand is then lost.\u003c\/p\u003e\n\u003ch3\u003eCan I fill the stand with sand or shot?\u003c\/h3\u003e\n\u003cp\u003eNo, filling isn't intended. The column is a solid laminated wood beam of four glued layers rather than a hollow tube. Damping comes from the wood, the glue, and the bitumen layer in the top plate. So you won't gain extra mass here, but you will gain quiet.\u003c\/p\u003e\n\u003ch3\u003eHow high does the tweeter sit with this stand?\u003c\/h3\u003e\n\u003cp\u003eJust under a metre above the floor. The stand measures 515 millimetres, the ES-14N is 491 millimetres tall, and the tweeter sits in the upper part of the baffle. That puts it roughly at ear level while seated – exactly the height Epos chose it for.\u003c\/p\u003e\n\u003ch3\u003eDo the spikes work on parquet flooring?\u003c\/h3\u003e\n\u003cp\u003eYes, but please use protective discs. Spikes concentrate the entire weight onto tiny areas and would otherwise leave pressure marks on parquet or laminate. Put flat metal discs under the tips and lock the spikes firmly in place, and the floor stays intact while the coupling stays well defined.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Epos stand from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know how much a properly mounted stand matters for the ES-14N, and we'll tell you honestly when the effort pays off. Our technician will align the pair on site for you on request. Call or write to us, and we'll sort out your room together.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eEpos ES-14N stand-mount speaker\u003c\/a\u003e, a \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eintegrated amplifier\u003c\/a\u003e to go with it, and more \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"EPOS","offers":[{"title":"Default Title","offer_id":52989505700176,"sku":"303232","price":800.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/epos-es-14n-standfuss-schraegansicht.jpg?v=1785886333"},{"product_id":"focalarias900stand","title":"Focal Aria S900 Speaker Stand (Pair)","description":"\u003cp\u003eThe Focal Aria S900 is a speaker stand made of matte aluminum and tempered glass, developed specifically for the Aria EVO X N°1 (as well as the Aria 905\/906). Supplied as a pair.\u003c\/p\u003e\n\u003cp\u003eAt 60.3 cm tall, it brings the bookshelf speaker's tweeter to ear height; the cable runs invisibly through the aluminum tube, and the speaker bolts firmly onto the satin-black mounting plate.\u003c\/p\u003e\n\u003ch2\u003eWhy the Focal Aria S900?\u003c\/h2\u003e\n\u003cp\u003eBecause a good bookshelf speaker only shows its potential on the right stand. The firm bolt-down turns speaker and stand into one mechanical unit – that settles the cabinet and tightens up the bass. The internal cable routing keeps the look clean, the tempered-glass base lowers the center of gravity and gives it a secure stance. Spikes for carpet and rubber feet for hard floors are included.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA stand that fits the N°1 exactly – acoustically and visually. Tweeter at ear height, stable footing, no cables in sight.\u003c\/p\u003e\n\u003ch3\u003eWho is the Aria S900 for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eStraight talk: the S900 is made for the Aria EVO X N°1 (and Aria 905\/906) and drilled precisely for it. Trying to bolt other speakers onto it just ruins the finish – a universal stand is the better choice then. And on deep-pile carpet, the included spikes belong underneath, or the whole thing wobbles.\u003c\/p\u003e\n\u003ch3\u003eCan I really hide the cable?\u003c\/h3\u003e\n\u003cp\u003eYes. You route it in through the bottom of the glass base into the aluminum tube and back out at the mounting plate up top – it's hard to get cleaner than that.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe matching stand for the N°1 – stable, tidy, and acoustically sensible. At HD Zürisee in Wädenswil we sort out placement, height, and cabling right along with it.\u003c\/p\u003e\n\u003ch2\u003eTechnical data – Focal Aria S900\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the listed price is for the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand (pair) for Aria EVO X N°1 \/ Aria 905 \/ 906\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 60.3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase footprint:\u003c\/strong\u003e 27.3 × 34.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 27.3 × 60.3 × 34.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6.3 kg per stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube material:\u003c\/strong\u003e matte aluminum with internal cable routing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase material:\u003c\/strong\u003e tempered glass, gloss black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting plate:\u003c\/strong\u003e steel, satin black, for bolting on the speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoupling:\u003c\/strong\u003e spikes (carpet) and rubber feet (hard floors), both included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2 stands (1 pair), mounting hardware, spikes + rubber feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the S900 also fit other speakers?\u003c\/h3\u003e\n\u003cp\u003eIt's designed and precisely drilled for the Aria EVO X N°1 as well as the Aria 905\/906. For other models we recommend a universal stand – that protects both the finish and the stability.\u003c\/p\u003e\n\u003ch3\u003eDoes the speaker need to be bolted down?\u003c\/h3\u003e\n\u003cp\u003eWe recommend it. Bolting couples speaker and stand firmly together, which noticeably improves stability and bass control compared with a speaker just set loosely on top.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Focal Aria S900 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we think of stand, speaker, and amplifier as one unit. We sort out placement, height, and cabling with you – personal advice and service with our own technician.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speaker\u003c\/a\u003e Aria EVO X N°1, a matching \u003ca href=\"\/en-ch\/collections\/vollverstarker\"\u003eamplifier\u003c\/a\u003e, and more \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Focal","offers":[{"title":"Default Title","offer_id":52989506650448,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/focal-aria-s900-lautsprecher-staender-paaransicht.jpg?v=1785900954"},{"product_id":"goldnotea3evo2stand","title":"Gold Note A3 EVO II Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Gold Note A3 EVO II speaker stand is the factory-matched base for the A3 EVO II bookshelf speaker — it brings the cabinet to ear height and decouples it from the floor.\u003c\/p\u003e\n\u003cp\u003eGold Note combines lacquered MDF with aluminium for this: mass against resonance, metal for stiffness. At 76 centimetres tall, the A3 EVO II's silk dome sits at ear height in a typical seated position. Sold and delivered as a pair.\u003c\/p\u003e\n\u003ch2\u003eWhy the A3 EVO II speaker stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a bookshelf speaker almost never belongs on a shelf. On a sideboard the cabinet couples into the furniture panel, the bass turns muddy, and the soundstage drops downward. A heavy, mechanically quiet stand solves both problems at once — and this one is tailored to the A3 EVO II's footprint and weight, rather than being an off-the-shelf compromise.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of stands weighing 20 kilograms together, whose base plate at 29 × 44 centimetres is noticeably larger than the speaker's footprint — giving tip-over safety, even if someone bumps into it in passing. The height is chosen so you don't need to prop anything up or improvise. Visually, the stand in black deliberately stays in the background.\u003c\/p\u003e\n\u003ch3\u003eWho is the A3 EVO II speaker stand suited for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns a pair of Gold Note A3 EVO II and wants to hear what's really in them. Plain talk: the stand is tailored to exactly this speaker. It's neither intended nor sized as a universal solution for any other box — if you want to put wider or deeper cabinets on it, compare the dimensions first. And if you have to build the A3 EVO II permanently into a niche anyway, you're better off skipping the stand and investing in absorbers.\u003c\/p\u003e\n\u003ch3\u003eOur verdict\u003c\/h3\u003e\n\u003cp\u003eNo accessory gimmick, but an audible part of the system. If you take the A3 EVO II seriously, you plan the stand in from the start — it's the cheapest sound upgrade you can make to this speaker at all. At HD Zürisee in Wädenswil you get speaker and base from a single source.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: dedicated speaker stand for Gold Note A3 EVO II\u003c\/li\u003e\n\u003cli\u003eMaterial: lacquered MDF and aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 29 × 76 × 44 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 20 kg per pair (10 kg each)\u003c\/li\u003e\n\u003cli\u003eFloor coupling: adjustable spikes for levelling\u003c\/li\u003e\n\u003cli\u003eScope of delivery: pair (2 stands), spikes, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eAre the stands delivered as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, the scope of delivery includes two stands. Gold Note also states its figures per pair, such as the 20-kilogram weight for both together. A single stand, for example as an addition for a centre channel, is not part of the regular programme.\u003c\/p\u003e\n\u003ch3\u003eHow tall is the stand, and does it suit my seating height?\u003c\/h3\u003e\n\u003cp\u003eIt measures 76 centimetres. That puts the A3 EVO II's tweeter at roughly ear height for a typical sofa or armchair seating position. If you sit noticeably lower, it helps to tilt the speakers slightly forward or adjust your listening position.\u003c\/p\u003e\n\u003ch3\u003eWill the spikes scratch my parquet floor?\u003c\/h3\u003e\n\u003cp\u003eOnly without a pad. The spikes are meant for levelling and mechanical coupling; on sensitive floors, spike shoes or washers belong underneath them. On carpet, on the other hand, they're meant to dig in — that's exactly what they're for.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit other bookshelf speakers?\u003c\/h3\u003e\n\u003cp\u003eOnly to a limited extent. The mounting surface is designed for the A3 EVO II's footprint. Noticeably larger or heavier cabinets no longer stand securely on it. If you have a different speaker, compare the dimensions first or just ask us — we also carry universal stands.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eNo. Gold Note relies on solid material throughout rather than hollow tubes, because mass helps against resonance. The speaker cables therefore run along the outside of the column. A thin cable tie or clip makes this barely noticeable.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the A3 EVO II speaker stand from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we think of speaker and stand as a matched unit and give you concrete help with placement in the room — distance to the rear wall, toe-in, listening distance. Our technician Mauri sets it up on site for you on request. Get in touch with HD Zürisee in Wädenswil.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe stand is built for the Gold Note A3 EVO II from our \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e. You'll find further bases for other models under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Gold Note","offers":[{"title":"Default Title","offer_id":52989508518224,"sku":"304494","price":990.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/gold-note-a3-evo-ii-lautsprecherstaender-schwarz-paaransicht.jpg?v=1785925157"},{"product_id":"jbljs120stand","title":"JBL JS-120 Speaker Stand, Black (pair)","description":"\u003cp\u003eThe JBL JS-120 is the matching speaker stand for the JBL L100 Classic and L100 Classic MKII – it brings the large bookshelf speaker to optimal ear height and tilts it 7° towards the listener. Sold in pairs.\u003c\/p\u003e\u003cp\u003eA sturdy metal construction with a black finish, height-adjustable feet and rubberised floor feet. Also fits the older L100, L100A, L100 Century as well as 4312E\/SE\/G and 4319.\u003c\/p\u003e\u003ch2\u003eWhy the JBL JS-120?\u003c\/h2\u003e\u003cp\u003eBecause a large bookshelf speaker like the L100 only shows its potential on the right stand: at ear height, slightly angled and cleanly decoupled from the floor. Placed freely on furniture, it loses openness and precise imaging.\u003c\/p\u003e\u003ch3\u003eWho is the JS-120 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e The JS-120 is tailored exactly to the L100 family – it isn't meant as a universal stand for any other speaker. For the L82 or L52\/4305P, there are the matching JS-80 and JS-65.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eNot an accessory gimmick, but an audibly important part of the system. If you take the L100 seriously, you plan the JS-120 in right from the start.\u003c\/p\u003e\u003ch2\u003eTechnical data – JBL JS-120\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: speaker stand for JBL L100 Classic \/ L100 Classic MKII (pair)\u003c\/li\u003e\n\u003cli\u003eAlso compatible with: L100, L100A, L100 Century, 4312E\/SE\/G, 4319\u003c\/li\u003e\n\u003cli\u003eMaterial: metal, black finish\u003c\/li\u003e\n\u003cli\u003eTilt: 7° backward\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 322 × 236 × 362 mm\u003c\/li\u003e\n\u003cli\u003eFeet: height-adjustable, 4 rubberised floor feet\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 stands (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the JS-120 fit my L100 Classic MKII?\u003c\/h3\u003e\u003cp\u003eYes, the JS-120 is made exactly for the L100 Classic (MKII) and tilts it 7°. You need one stand per speaker – the JS-120 is supplied in pairs.\u003c\/p\u003e\u003ch3\u003eIs the JS-120 supplied singly or in pairs?\u003c\/h3\u003e\u003cp\u003eIn pairs – you receive two stands, for a complete pair of speakers.\u003c\/p\u003e\u003ch3\u003eWhy buy the JBL JS-120 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause speakers and stands belong together. We deliver both as a matched set and set it up professionally on request. Free shipping from CHF 190.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eJBL L100 Classic MKII\u003c\/a\u003e and good \u003ca href=\"\/en-ch\/collections\/kabel\"\u003espeaker cables\u003c\/a\u003e.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":52989516874064,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/jbl-js-120-lautsprecherstaender-schwarz-schraegansicht.png?v=1786461196"},{"product_id":"jbljs65stand","title":"JBL JS-65 Speaker Stand, Black (pair)","description":"\u003cp\u003eThe JBL JS-65 is the matching speaker stand for the compact JBL L52 Classic, 4305P and 4309 – it positions them at optimal listening height and aligns the drivers with your ears. Sold in pairs.\u003c\/p\u003e\u003cp\u003eA metal construction with a black finish, made for small classic and studio monitor speakers.\u003c\/p\u003e\u003ch2\u003eWhy the JBL JS-65?\u003c\/h2\u003e\u003cp\u003eBecause a small speaker on a sideboard or shelf loses openness and bass control. On the JS-65, it stands stable, at ear height and decoupled from the floor – that tightens up the soundstage and settles the bass.\u003c\/p\u003e\u003ch3\u003eWho is the JS-65 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e The JS-65 is matched to the L52, 4305P and 4309. For the larger L82, take the JS-80; for the L100, the JS-120.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe right base turns a good compact speaker into a very good one. If you take the L52 or 4305P seriously, you plan the JS-65 in right from the start.\u003c\/p\u003e\u003ch2\u003eTechnical data – JBL JS-65\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: speaker stand for compact bookshelf\/studio monitors (pair)\u003c\/li\u003e\n\u003cli\u003eSuitable for: JBL L52 Classic, 4305P, 4309\u003c\/li\u003e\n\u003cli\u003eMaterial: metal, black finish\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 330 × 673 × 360 mm\u003c\/li\u003e\n\u003cli\u003eLoad capacity: up to 11 kg per stand\u003c\/li\u003e\n\u003cli\u003eFeet: 4 height-adjustable feet with rubber tip\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 stands (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the JS-65 supplied singly or in pairs?\u003c\/h3\u003e\u003cp\u003eIn pairs – you receive two stands, for a complete pair of speakers.\u003c\/p\u003e\u003ch3\u003eDoes the JS-65 fit my L52 or 4305P?\u003c\/h3\u003e\u003cp\u003eYes, the JS-65 is matched to the L52 Classic, 4305P and 4309 and brings them to ear height. It supports speakers up to 11 kg per stand.\u003c\/p\u003e\u003ch3\u003eWhy buy the JBL JS-65 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause speakers and stands belong together. We deliver both as a matched set and set it up professionally on request. Free shipping from CHF 190.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eJBL L52 Classic\u003c\/a\u003e and the active \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eJBL 4305P\u003c\/a\u003e.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":52989516906832,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/jbl-js-65-lautsprecherstaender-schwarz-schraegansicht.jpg?v=1786461194"},{"product_id":"jbljs80stand","title":"JBL JS-80 Speaker Stand, Black (pair)","description":"\u003cp\u003eThe JBL JS-80 is the matching speaker stand for the JBL L82 Classic (and 4329P) – it brings the bookshelf speaker to optimal listening height and tilts it 7° backward for the best dispersion. Sold in pairs.\u003c\/p\u003e\u003cp\u003eA sturdy construction with rubber feet, matched exactly to the cabinet width and weight of the L82.\u003c\/p\u003e\u003ch2\u003eWhy the JBL JS-80?\u003c\/h2\u003e\u003cp\u003eBecause the L82 plays more openly and with better control on the right stand: at ear height, slightly angled and cleanly decoupled from the floor. The 7° tilt optimally aims the drivers at the listening position.\u003c\/p\u003e\u003ch3\u003eWho is the JS-80 for – and who isn't it for?\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eStraight talk:\u003c\/strong\u003e The JS-80 is tailored to the L82 Classic and 4329P. For the L52\/4305P, take the JS-65; for the large L100, the JS-120.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe matching base for the L82 – stable, just the right height and sensibly angled. An audibly important part of the setup.\u003c\/p\u003e\u003ch2\u003eTechnical data – JBL JS-80\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: speaker stand for JBL L82 Classic \/ 4329P (pair)\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 330 × 462 × 360 mm (base width 254 mm)\u003c\/li\u003e\n\u003cli\u003eTilt: 7° backward\u003c\/li\u003e\n\u003cli\u003eMaterial: metal with rubber feet\u003c\/li\u003e\n\u003cli\u003eFeet: height-adjustable\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 stands (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the JS-80 fit my L82 Classic MKII?\u003c\/h3\u003e\u003cp\u003eYes, the JS-80 is made exactly for the L82 Classic (and the 4329P) and tilts it 7°. You need one stand per speaker.\u003c\/p\u003e\u003ch3\u003eIs the JS-80 supplied singly or in pairs?\u003c\/h3\u003e\u003cp\u003eIn pairs – you get two stands, for a complete pair of speakers.\u003c\/p\u003e\u003ch3\u003eWhy buy the JBL JS-80 at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause speakers and stands belong together. We deliver both as a matched set and set it up professionally on request. Free shipping from CHF 190.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eJBL L82 Classic MKII\u003c\/a\u003e and good \u003ca href=\"\/en-ch\/collections\/kabel\"\u003espeaker cables\u003c\/a\u003e.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":52989516939600,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/jbl-js-80-lautsprecherstaender-schwarz-frontansicht.png?v=1786461195"},{"product_id":"moonvoicestand","title":"MOON Stand 22 Speaker Stands for Voice 22 (Pair)","description":"\u003cp\u003eThe MOON Stand 22 is a low-resonance speaker stand developed exclusively for the MOON Voice 22 – it brings the speaker to optimal listening height and cleanly decouples it from the floor.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the MOON Stand 22?\u003c\/h2\u003e\n\u003cp\u003eBecause even the best bookshelf speaker only plays as well as the base it stands on. The Stand 22 is precisely tailored to the shape and mounting points of the Voice 22, turning speaker and stand into a rigid unit. The column can be filled with sand or fine granulate: more mass, less self-resonance, a calmer stance. Spikes cleanly decouple the whole thing from the floor on carpet; rubber feet are included for hard or sensitive floors.\u003c\/p\u003e\n\n\u003ch2\u003eWhat it delivers\u003c\/h2\u003e\n\u003cp\u003eOn the right stand, the Voice 22's sound noticeably tightens up: the bass becomes firmer and drier, the soundstage moves up to ear height and the imaging gains focus. Vibrations that would otherwise travel back into the cabinet via a wobbly shelf or a sideboard largely disappear. In short: the same speaker, audibly more composed.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Stand 22 for – and who isn't it for?\u003c\/h3\u003e\n\u003cp\u003eA must-buy for anyone placing their Voice 22 freely in the room and wanting to extract the last ounce of precision. Since it's made to fit the Voice 22 exactly, the speaker sits firmly and securely.\u003c\/p\u003e\n\u003cp\u003eStraight talk: the Stand 22 isn't intended for other speakers – its mounting and dimensions are tailored to the Voice 22. And if you're placing your speakers in a shelf or on the wall anyway, you don't need it. Standing freely in the room is where it earns its keep.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eNot an accessory gimmick, but the most acoustically sensible companion to the Voice 22: stable, fillable and cleanly built. If you're taking the Voice 22 seriously, factor in the matching stand from the start. We at HD Zürisee in Wädenswil are happy to show you what it draws out of your speakers.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price is per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e dedicated speaker stand, sold in pairs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e exclusively for MOON Voice 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e steel, column fillable with sand; top plate with damping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Sandtex coating, Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor coupling:\u003c\/strong\u003e spikes (for carpet) and rubber feet (for hard floors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 23 × 60 × 28 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 kg per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded in delivery:\u003c\/strong\u003e 1 pair (2 stands), spikes and rubber feet, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers is the MOON Stand 22 made for?\u003c\/strong\u003e\u003cbr\u003eExclusively for the MOON Voice 22. Shape, mounting and height are precisely matched to this speaker so that speaker and stand form a firm, low-resonance unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I fill the stand?\u003c\/strong\u003e\u003cbr\u003eYes, it's worthwhile. Filled with sand or fine granulate, the stand gains mass and calm. That settles the whole setup and makes the bass audibly tighter and more precise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Stand 22 supplied singly or in pairs?\u003c\/strong\u003e\u003cbr\u003eIn pairs. You receive two stands – matching the Voice 22 pair – including spikes and rubber feet for floor decoupling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the MOON Stand 22 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause placement is the underrated part of good reproduction. We set up the Voice 22 with the Stand 22 correctly in your room, advise on filling and positioning, and are there for you as an authorised MOON dealer in Wädenswil – with our own technician.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe stand belongs under the MOON Voice 22 from the \u003ca href=\"\/en-ch\/collections\/moon\"\u003eMOON Collection\u003c\/a\u003e. More speakers are shown under \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003eSpeakers\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"MOON","offers":[{"title":"Default Title","offer_id":52989541974352,"sku":null,"price":480.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/moon-stand-22-lautsprecher-staender-fuer-voice-22-seitenansicht.jpg?v=1786531858"},{"product_id":"raidhotd1-2standbl","title":"Raidho TD1.2 Speaker Stands, Black High Gloss (Pair)","description":"\u003cp\u003eThe Raidho TD1.2 speaker stand is the dedicated stand pair for the Raidho TD1.2 compact speaker – handmade in Denmark, with ceramic ball decoupling and height-adjustable feet.\u003c\/p\u003e\u003cp\u003eA compact speaker in this class is only as good as what it stands on. That's exactly what this stand is for: not a universal model, but part of the TD1.2 concept.\u003c\/p\u003e\u003ch2\u003eWhy the dedicated TD1.2 stand?\u003c\/h2\u003e\u003cp\u003eRaidho designed this stand specifically for the TD1.2. Its 78 cm height brings the ribbon tweeter to ear level, the ceramic ball system decouples the speaker from the stand at four points, and the height-adjustable feet compensate for uneven floors. That keeps the speaker rock-steady – and you can hear it.\u003c\/p\u003e\u003ch2\u003eWhat it delivers\u003c\/h2\u003e\u003cp\u003eA stable, decoupled stand means fewer resonances, tighter imaging and more defined bass. At ear level the dispersion axis is correct, and the soundstage becomes more tangible. The difference between \"just any stand\" and the dedicated one is exactly what you shouldn't give away with a speaker in this class.\u003c\/p\u003e\u003ch3\u003eWho is the TD1.2 stand for?\u003c\/h3\u003e\u003cp\u003eFor anyone running a TD1.2 (or TD1.2 Signature) seriously. \u003cstrong\u003eBottom line:\u003c\/strong\u003e a must, not a nice-to-have – a wobbly or too-low stand turns the best compact speaker into a mediocre one. You get it straight as a pair – matching your two TD1.2s.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eWith the TD1.2, the dedicated stand isn't an accessory – it's part of the speaker. It's supplied exclusively as a pair, so both speakers are automatically complete.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Dedicated speaker stand for Raidho TD1.2 (incl. Signature), sold as a pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 78 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 320 × 780 × 420 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.8 kg per stand (9.6 kg per pair)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDecoupling:\u003c\/strong\u003e ceramic ball system at four points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeet:\u003c\/strong\u003e height-adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in:\u003c\/strong\u003e handmade in Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black High Gloss or Silver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown is per pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 Raidho TD1.2 speaker stands (1 pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the price per stand or per pair?\u003c\/h3\u003e\u003cp\u003eThe price is per pair (2 stands) – matching a TD1.2 pair. We don't offer single stands separately.\u003c\/p\u003e\u003ch3\u003eDoes the stand also fit the TD1.2 Signature?\u003c\/h3\u003e\u003cp\u003eYes. The TD1.2 Signature uses the same cabinet as the standard TD1.2 – the stand fits both versions.\u003c\/p\u003e\u003ch3\u003eDo I need one or two stands?\u003c\/h3\u003e\u003cp\u003eYou always receive both stands as a pair, matching a TD1.2 pair. We don't sell single stands separately.\u003c\/p\u003e\u003ch3\u003eWhy not just use a universal stand?\u003c\/h3\u003e\u003cp\u003eHeight, footprint and the ceramic ball decoupling are all tuned to the TD1.2. Any random stand might match that – usually it doesn't, and then you give away imaging and bass definition.\u003c\/p\u003e\u003ch3\u003eWhy buy the Raidho TD1.2 stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we carry Raidho and know how the TD1.2, its stand and placement work together. We'll advise you on height, positioning and decoupling, and deliver straight to you on request. Call us at 044 680 22 00 or message us on WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003ePairs well with\u003c\/h2\u003e\u003cp\u003eThis stand belongs under the Raidho TD1.2 (also available as Signature) – you'll find it in the \u003ca href=\"\/en-ch\/collections\/raidho\"\u003eRaidho range\u003c\/a\u003e. More matching stands are shown in the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e category.\u003c\/p\u003e","brand":"Raidho","offers":[{"title":"Default Title","offer_id":52989552787792,"sku":null,"price":5396.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/raidho-td1-2-lautsprecherstaender-frontansicht-schwarz-hochglanz.png?v=1786616562"},{"product_id":"raidhotd1-2standsi","title":"Raidho TD1.2 Speaker Stands, Silver (Pair)","description":"\u003cp\u003eThe Raidho TD1.2 speaker stand is the dedicated stand pair for the Raidho TD1.2 compact speaker – handmade in Denmark, with ceramic ball decoupling and height-adjustable feet.\u003c\/p\u003e\u003cp\u003eA compact speaker in this class is only as good as what it stands on. That's exactly what this stand is for: not a universal model, but part of the TD1.2 concept.\u003c\/p\u003e\u003ch2\u003eWhy the dedicated TD1.2 stand?\u003c\/h2\u003e\u003cp\u003eRaidho designed this stand specifically for the TD1.2. Its 78 cm height brings the ribbon tweeter to ear level, the ceramic ball system decouples the speaker from the stand at four points, and the height-adjustable feet compensate for uneven floors. That keeps the speaker rock-steady – and you can hear it.\u003c\/p\u003e\u003ch2\u003eWhat it delivers\u003c\/h2\u003e\u003cp\u003eA stable, decoupled stand means fewer resonances, tighter imaging and more defined bass. At ear level the dispersion axis is correct, and the soundstage becomes more tangible. The difference between \"just any stand\" and the dedicated one is exactly what you shouldn't give away with a speaker in this class.\u003c\/p\u003e\u003ch3\u003eWho is the TD1.2 stand for?\u003c\/h3\u003e\u003cp\u003eFor anyone running a TD1.2 (or TD1.2 Signature) seriously. \u003cstrong\u003eBottom line:\u003c\/strong\u003e a must, not a nice-to-have – a wobbly or too-low stand turns the best compact speaker into a mediocre one. You get it straight as a pair – matching your two TD1.2s.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eWith the TD1.2, the dedicated stand isn't an accessory – it's part of the speaker. It's supplied exclusively as a pair, so both speakers are automatically complete.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Dedicated speaker stand for Raidho TD1.2 (incl. Signature), sold as a pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 78 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 320 × 780 × 420 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.8 kg per stand (9.6 kg per pair)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDecoupling:\u003c\/strong\u003e ceramic ball system at four points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeet:\u003c\/strong\u003e height-adjustable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade in:\u003c\/strong\u003e handmade in Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black High Gloss or Silver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown is per pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 Raidho TD1.2 speaker stands (1 pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the price per stand or per pair?\u003c\/h3\u003e\u003cp\u003eThe price is per pair (2 stands) – matching a TD1.2 pair. We don't offer single stands separately.\u003c\/p\u003e\u003ch3\u003eDoes the stand also fit the TD1.2 Signature?\u003c\/h3\u003e\u003cp\u003eYes. The TD1.2 Signature uses the same cabinet as the standard TD1.2 – the stand fits both versions.\u003c\/p\u003e\u003ch3\u003eDo I need one or two stands?\u003c\/h3\u003e\u003cp\u003eYou always receive both stands as a pair, matching a TD1.2 pair. We don't sell single stands separately.\u003c\/p\u003e\u003ch3\u003eWhy not just use a universal stand?\u003c\/h3\u003e\u003cp\u003eHeight, footprint and the ceramic ball decoupling are all tuned to the TD1.2. Any random stand might match that – usually it doesn't, and then you give away imaging and bass definition.\u003c\/p\u003e\u003ch3\u003eWhy buy the Raidho TD1.2 stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we carry Raidho and know how the TD1.2, its stand and placement work together. We'll advise you on height, positioning and decoupling, and deliver straight to you on request. Call us at 044 680 22 00 or message us on WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003ePairs well with\u003c\/h2\u003e\u003cp\u003eThis stand belongs under the Raidho TD1.2 (also available as Signature) – you'll find it in the \u003ca href=\"\/en-ch\/collections\/raidho\"\u003eRaidho range\u003c\/a\u003e. More matching stands are shown in the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e category.\u003c\/p\u003e","brand":"Raidho","offers":[{"title":"Default Title","offer_id":52989552820560,"sku":null,"price":5396.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/raidho-td1-2-lautsprecherstaender-frontansicht-silber.png?v=1786616564"},{"product_id":"raidhox1tstandbl","title":"Raidho X1t Speaker Stand, Black High Gloss (Pair)","description":"\u003cp\u003eThe Raidho X1t Speaker Stand is the dedicated pair of stands for the Raidho X1t compact speaker from the X series – handmade in Denmark, with levelling feet for secure footing.\u003c\/p\u003e\u003cp\u003eEven the compact X1t wants to stand properly. This stand brings it to the right height and provides a calm, stable base.\u003c\/p\u003e\u003ch2\u003eWhy the dedicated X1t stand?\u003c\/h2\u003e\u003cp\u003eForm follows function: the stand is tailored to the X1t, brings it to ear height and stands securely even on uneven floors thanks to levelling screws. The massive, torsion-resistant construction damps resonances instead of passing them on.\u003c\/p\u003e\u003ch2\u003eWhat it delivers\u003c\/h2\u003e\u003cp\u003eA stable base means cleaner imaging and more defined bass. At the right height the radiation axis is correct, the X1t disappears as a sound source and the soundstage opens up. That's exactly what a dedicated stand is for.\u003c\/p\u003e\u003ch3\u003eWho is the X1t stand for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to set up an X1t freely and at ear height. \u003cstrong\u003eBottom line:\u003c\/strong\u003e placed on a shelf, the X1t wastes its potential – a stable stand is half the battle. You get it directly as a pair – matching your two X1t speakers.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eSolid, unobtrusive, a perfect fit: the dedicated stand gets out of the X1t exactly what you bought it for. It is supplied exclusively as a pair, so both speakers' equipment is automatically complete.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dedicated speaker stand for Raidho X1t, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 245 × 650 × 308 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.7 kg per stand (7.4 kg per pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e levelling screws for secure footing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e handmade in Denmark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black High Gloss or White High Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price is per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 Raidho X1t speaker stands (1 pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the price per stand or per pair?\u003c\/h3\u003e\u003cp\u003eThe price is per pair (2 stands) – matching one X1t pair. We don't offer single stands separately.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the X1t stand fit?\u003c\/h3\u003e\u003cp\u003eIt's designed for the Raidho X1t from the X series. Whether it fits another compact speaker, we're happy to check with you – height and top plate should match.\u003c\/p\u003e\u003ch3\u003eDoes the stand stand securely on uneven floors too?\u003c\/h3\u003e\u003cp\u003eYes. The levelling screws let you compensate for unevenness, so the stand stands wobble-free and stable.\u003c\/p\u003e\u003ch3\u003eWhy buy the Raidho X1t stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we carry Raidho and advise you on placement, height and speaker match – instead of just selling you a stand. Call us on 044 680 22 00 or write via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003ePairs well with\u003c\/h2\u003e\u003cp\u003eYou'll find more stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e, the whole Raidho range in the \u003ca href=\"\/en-ch\/collections\/raidho\"\u003eRaidho range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raidho","offers":[{"title":"Default Title","offer_id":52989555409232,"sku":null,"price":698.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/raidho-x1t-lautsprecherstaender-seitenansicht-schwarz-hochglanz.jpg?v=1786616564"},{"product_id":"raidhox1tstandwh","title":"Raidho X1t Speaker Stands, White High Gloss (Pair)","description":"\u003cp\u003eThe Raidho X1t speaker stand is the dedicated pair of stands for the Raidho X1t compact speaker from the X series – handcrafted in Denmark, with levelling feet for a secure stance.\u003c\/p\u003e\u003cp\u003eEven the compact X1t needs to stand properly. This stand brings it to the right height and provides a calm, stable base.\u003c\/p\u003e\u003ch2\u003eWhy the dedicated X1t stand?\u003c\/h2\u003e\u003cp\u003eForm follows function: the stand is tailored to the X1t, brings it to ear height, and stands securely even on uneven floors thanks to levelling screws. The solid, torsion-resistant construction damps resonances instead of passing them on.\u003c\/p\u003e\u003ch2\u003eWhat it does for you\u003c\/h2\u003e\u003cp\u003eA stable base means cleaner imaging and more defined bass. At the right height, the dispersion axis is correct, the X1t disappears as a sound source, and the soundstage opens up. That's exactly what a dedicated stand is for.\u003c\/p\u003e\u003ch3\u003eWho is the X1t stand designed for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to place an X1t freestanding at ear height. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e put on a shelf, the X1t gives away its potential – a stable stand is half the job. It comes as a pair – matching your two X1ts.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eSolid, unobtrusive, a perfect fit: the dedicated stand gets out of the X1t exactly what you bought it for. It's supplied exclusively in pairs, so both speakers are automatically fully equipped.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Dedicated speaker stand for Raidho X1t, sold in pairs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 245 × 650 × 308 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.7 kg per stand (7.4 kg per pair)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeet:\u003c\/strong\u003e Levelling screws for a secure stance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Handcrafted in Denmark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinishes:\u003c\/strong\u003e Black high gloss or white high gloss\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price is per pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e 2 Raidho X1t speaker stands (1 pair)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs the price per stand or per pair?\u003c\/h3\u003e\u003cp\u003eThe price is per pair (2 stands) – matching an X1t pair. We don't offer single stands separately.\u003c\/p\u003e\u003ch3\u003eWhich speakers does the X1t stand fit?\u003c\/h3\u003e\u003cp\u003eIt's designed for the Raidho X1t from the X series. Whether it fits another compact speaker, we're happy to discuss with you – height and mounting surface should match.\u003c\/p\u003e\u003ch3\u003eDoes the stand stand securely on uneven floors too?\u003c\/h3\u003e\u003cp\u003eYes. Using the levelling screws, you compensate for unevenness, so the stand stands stable and wobble-free.\u003c\/p\u003e\u003ch3\u003eWhy buy the Raidho X1t stand from HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we carry Raidho and advise you on placement, height, and speaker matching – instead of just selling you a stand. Call us on 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find more stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and the whole Raidho range in the \u003ca href=\"\/en-ch\/collections\/raidho\"\u003eRaidho series\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raidho","offers":[{"title":"Default Title","offer_id":52989555442000,"sku":null,"price":698.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/raidho-x1t-lautsprecherstaender-seitenansicht-weiss-hochglanz.jpg?v=1786616567"},{"product_id":"revivalaudioatalante5stand","title":"Revival Audio Atalante 5 Stand, Black (Pair)","description":"\u003cp\u003eThe Revival Audio Atalante 5 Stand is a massive iron speaker stand developed specifically for the Atalante 5, bringing the monitor to the acoustically correct height. Designed in cooperation with the Parisian studio A+A Cooren, it combines raw stability with a timeless, understated presence.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atalante 5 Stand?\u003c\/h2\u003e\n\u003cp\u003eA speaker with a 30 cm woofer generates tremendous forces – and they need to be dissipated, not stored. That's exactly what this stand is built for: solid iron, 10.5 kilograms per unit, a wide base plate for tip-resistance under the heavy speakers. This inertia is your friend acoustically: a heavy stand absorbs no energy and returns none, letting the speaker do its job cleanly. For decoupling from the floor, gold-coloured metal spikes for carpet and rubber feet for hard floors are included. And there's room under the top plate for a few favourite LPs to strike a pose.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atalante 5 Stand intended for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns or is planning an Atalante 5 – here the stand isn't optional accessory, it's part of the concept. Only at the right height does the spatial imaging click into place. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e the base plate is deliberately generous at 460 millimetres. That gives stability but needs space – measure your listening area quickly before ordering to make sure there's enough room.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eLooks more like a piece of bridge engineering than a delicate piece of furniture – and that's exactly the point. The Atalante 5 Stand is the foundation that turns a large monitor into a precise speaker. If you take the Atalante 5 seriously, there's no way around it.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown is for the pair\u003c\/li\u003e\n\u003cli\u003eType: speaker stand (pair), specifically for Revival Audio Atalante 5\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iron\u003c\/li\u003e\n\u003cli\u003eColour: matte black\u003c\/li\u003e\n\u003cli\u003eHeight without spikes: 404 mm\u003c\/li\u003e\n\u003cli\u003eHeight with spikes: 428 mm\u003c\/li\u003e\n\u003cli\u003eBase plate: 460 × 395 mm\u003c\/li\u003e\n\u003cli\u003eTop plate: 345 × 410 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10.5 kg per unit\u003c\/li\u003e\n\u003cli\u003eSpecial feature: integrated record shelf under the top plate\u003c\/li\u003e\n\u003cli\u003eDesign: in cooperation with A+A Cooren\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (2 units) Atalante 5 Stands, gold-coloured metal spikes, rubber feet for hard floors, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the Atalante 5 need this special stand?\u003c\/strong\u003e\u003cbr\u003eIt brings the tweeter to ear height and gives the heavy speaker a low-resonance foundation. The solid iron dissipates the energy of the 30 cm woofer instead of letting it resonate along – making the bass noticeably drier and the spatial imaging more precise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the gold spikes and rubber feet for?\u003c\/strong\u003e\u003cbr\u003eThe spikes couple the stand firmly to the floor through carpet and drain vibrations away. For hard floors like parquet or stone, rubber feet are included that protect the floor while still decoupling stably. Both sets are part of the delivery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space does the stand need?\u003c\/strong\u003e\u003cbr\u003eThe base plate measures 460 × 395 millimetres – deliberately wide so the 33 kg speaker stands tip-resistant. Plan this footprint per stand. The total height with spikes is 428 millimetres, which brings the Atalante 5 to the ideal listening height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Atalante 5 Stand at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we think of the Atalante 5 and its stand as one unit: we advise you on placement, height and decoupling in your room and deliver everything fully assembled on request. As a specialist shop in Wädenswil with our own technician, we're there for you after the purchase too. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade for the \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eRevival Audio Atalante 5\u003c\/a\u003e – speaker and stand belong together.\u003c\/li\u003e\n\u003cli\u003eMore models from the series can be found under \u003ca href=\"\/en-ch\/collections\/revival-audio\"\u003eRevival Audio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eA clean connection to the amplifier with good \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Revival Audio","offers":[{"title":"Default Title","offer_id":52989556588880,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/revival-audio-atalante-5-stand-lautsprecher-staender-frontansicht.jpg?v=1786638038"},{"product_id":"revivalaudioatalante7stand","title":"Revival Audio Atalante 7 Stand, Black (Pair)","description":"\u003cp\u003eThe Revival Audio Atalante 7 Stand is the dedicated Smart Isolation stand for the Atalante 7 – available here as a separate pair in Black. Good to know: a new Atalante 7 Évo already comes with the matching stands included.\u003c\/p\u003e\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eWith a 15-inch woofer, the right stand isn't an accessory, it's part of the speaker. The Smart Isolation stand raises the Atalante 7 from 820 to 1160 millimetres total height and brings the tweeter exactly to ear height, where the sound image locks in. The decoupling interface between speaker and stand, plus micro-adjustable spikes, keep vibrations away from the floor – this keeps the bass dry and the imaging stable.\u003c\/p\u003e\n\u003ch3\u003eWho is this item for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who has an Atalante 7 without a stand, or needs a second pair. \u003cstrong\u003eStraight talk:\u003c\/strong\u003e if you're buying a new Atalante 7 Évo, you don't need this item – the stands are already included then, matched to the speaker's finish. Ordered separately, the pair comes in Black.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand that doesn't look like an accessory, but like a foundation. It reliably brings the Atalante 7 to listening height and keeps it calm – and because it comes as a pair, the combination stands correctly right away.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown is for the pair\u003c\/li\u003e\n\u003cli\u003eType: Smart Isolation stand for Revival Audio Atalante 7\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eDecoupling: micro-adjustable spikes and decoupling interface between speaker and stand\u003c\/li\u003e\n\u003cli\u003eHeight effect: raises the Atalante 7 from 820 mm to 1160 mm total height (tweeter at ear height)\u003c\/li\u003e\n\u003cli\u003eSpecial feature: internal cable routing possible\u003c\/li\u003e\n\u003cli\u003eNote: a new Atalante 7 Évo already includes the matching stands\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2 stands (1 pair) Atalante 7 Stand incl. spike and mounting set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the price apply to a pair or a single stand?\u003c\/strong\u003e\u003cbr\u003eThe price shown is for a pair, i.e. two stands. Revival Audio sells the Atalante 7 Stand exclusively as a pair, which is also how it appears on the Swiss price list. We can source a single stand on request – just ask us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need this stand in addition to the Atalante 7 Évo?\u003c\/strong\u003e\u003cbr\u003eNo. A new Atalante 7 Évo already includes the matching Smart Isolation stand, both in the delivery and in the price. This offer is for anyone who needs a stand pair separately, for example as a replacement or for an older Atalante 7.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish does the stand come in?\u003c\/strong\u003e\u003cbr\u003eOrdered separately, the Atalante 7 Stand pair comes in Black. The stands supplied with the Atalante 7 Évo, on the other hand, are matched to the speaker's veneer. If the look matters to you, check with us briefly before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Atalante 7 Stand at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we know the speaker and stand as a unit: we check compatibility, clarify the finish with you and deliver assembled on request. As a specialist shop in Wädenswil with our own technician, we're there for you after the purchase too. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade for the \u003ca href=\"\/en-ch\/collections\/standlautsprecher\"\u003eRevival Audio Atalante 7 Évo\u003c\/a\u003e – speaker and stand belong together.\u003c\/li\u003e\n\u003cli\u003eMore models from the series can be found under \u003ca href=\"\/en-ch\/collections\/revival-audio\"\u003eRevival Audio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eA clean connection to the amplifier with good \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Revival Audio","offers":[{"title":"Default Title","offer_id":52989556719952,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/revival-audio-atalante-7-stand-lautsprecher-staender-schwarz-schraegansicht.png?v=1788961564"},{"product_id":"revivalaudiostand3","title":"Revival Audio Stand 3 Speaker Stand (Pair)","description":"\u003cp\u003eThe Revival Audio Stand 3 is a solid iron speaker stand tuned precisely to the bookshelf speakers of the Atalante series.\u003c\/p\u003e\n\u003cp\u003eDesigned by the Parisian design studio A+A Cooren, who also drew the Atalante speakers – so shape and mass aren't a coincidence, they're a factory match. A stand isn't a detail you can overlook: it has a say in how good your speaker ends up sounding.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Stand 3?\u003c\/h2\u003e\n\u003cp\u003eA speaker can only play as cleanly as it stands. The Stand 3, made of solid iron, gives the Atalante 3 an immovable counterweight, so the cone's impulses turn into sound – not into vibrations in your sideboard. The height is chosen so the tweeter lands at ear level when seated: with spikes fitted you get 715 mm, without them 678 mm. That's exactly where the speaker unfolds its vivid, clean soundstage.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eStability with style. The heavy iron construction cleanly decouples the speaker from the floor and keeps it rock-solid in place. Two sets are included for floor coupling: metal spikes for carpet, which pierce the pile and couple to the hard subfloor, and rubber feet for parquet, tiles or stone. That way the stand sits wobble-free on any surface – and protects sensitive floors.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Stand 3 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to properly place an Atalante 3 – or a similarly sized bookshelf speaker. \u003cstrong\u003ePlain talk:\u003c\/strong\u003e the top plate measures 180 × 210 mm, which matches the Atalante 3 and many compact speakers of similar footprint; with other brands, just check the dimensions of the speaker's underside first. At 5.6 kg each, the stand is solid but no ton-heavy monster; in a household with wildly romping kids or cats, secure the speaker additionally with a bit of museum putty. Anyone who puts their good speakers on a sideboard audibly gives away precision – honestly, they're too good for that.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe Stand 3 is the obvious complement to the Atalante 3: visually all of a piece, acoustically exactly what a good bookshelf speaker needs underneath it. At HD Zürisee in Wädenswil, we recommend the matching stand practically every time – it's the cheapest upgrade that makes an audible difference.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the listed price is for the pair\u003c\/li\u003e\n\u003cli\u003eDesign: speaker stand (pair), solid iron construction\u003c\/li\u003e\n\u003cli\u003eColor: Black (matte)\u003c\/li\u003e\n\u003cli\u003eHeight without spikes: 678 mm\u003c\/li\u003e\n\u003cli\u003eHeight with spikes: 715 mm\u003c\/li\u003e\n\u003cli\u003eBase plate: 267 × 237 mm (without spikes) \/ 304 × 274 mm (with spikes)\u003c\/li\u003e\n\u003cli\u003eTop plate: 180 × 210 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6 kg each\u003c\/li\u003e\n\u003cli\u003eFloor coupling: metal spikes (carpet) and rubber feet (hard floors)\u003c\/li\u003e\n\u003cli\u003eDesign: A+A Cooren, matched to the Atalante series\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2 stands, spike set, rubber foot set, mounting hardware and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Stand 3 only fit the Atalante 3?\u003c\/strong\u003e\u003cbr\u003eNo. It's tuned to the Atalante 3, but supports any bookshelf speaker with a similar footprint and comparable weight. The top plate measures 180 × 210 mm. With other brands, it's worth a quick check of the speaker's underside dimensions, and then nothing stands in the way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpikes or rubber feet – which do I use?\u003c\/strong\u003e\u003cbr\u003eThat depends on the floor. On carpet, use the metal spikes: they pierce the pile and couple to the solid subfloor. On parquet, tiles or stone, use the rubber feet – they sit non-slip and protect the surface. Both sets are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall is the Stand 3?\u003c\/strong\u003e\u003cbr\u003eWithout spikes it measures 678 mm, with spikes fitted 715 mm. This height brings the Atalante 3's tweeter to ear level when seated – the prerequisite for a clean, vivid soundstage. The spikes can also be fine-adjusted if your floor isn't quite level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the speakers sit securely on the stand?\u003c\/strong\u003e\u003cbr\u003eYes. The iron construction stands solid and wobble-free, and the top plate gives the speaker a secure hold. In households with very active children or pets, we recommend additionally securing the speakers to the plate with a bit of museum putty – then even a bump won't budge the speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Revival Audio Stand 3 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we know how much difference a good stand makes, and we think it through together with the matching speaker. We advise you on placement in your room, on floor coupling, and on combining it with your amplifier and speakers – and take care of delivery and installation on request.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Stand 3 belongs under the \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e of the Atalante series – you'll find the matching speakers and more from the brand in the \u003ca href=\"\/en-ch\/collections\/revival-audio\"\u003eRevival Audio\u003c\/a\u003e collection. For a clean connection, it's worth a look at the \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cables\u003c\/a\u003e; more stands are shown in the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"Revival Audio","offers":[{"title":"Default Title","offer_id":52989556982096,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/revival-audio-stand-3-lautsprecher-staender-frontansicht.jpg?v=1786641624"},{"product_id":"scansonichdtwinstand","title":"Scansonic HD Twin Stand Speaker Stands (Pair)","description":"\u003cp\u003eThe Scansonic HD Twin Stand is the matching speaker stand for the MB1 B bookshelf speaker, sold as a pair with adjustable aluminium feet in the style of the MB series.\u003c\/p\u003e\n\u003cp\u003eA good bookshelf speaker deserves a good stand – anything else is like driving a sports car on summer tyres in winter. The Twin Stand brings the MB1 B up to ear height and cleanly decouples it from the floor.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Twin Stand?\u003c\/h2\u003e\n\u003cp\u003eThe Twin Stand was developed specifically for the MB1 B and picks up its design: adjustable aluminium feet, matching proportions, calm looks. Only on the right stand does a bookshelf speaker really open up – stably placed, decoupled from furniture and at the ideal height for the listening position.\u003c\/p\u003e\n\u003cp\u003eAs a \"Twin\", it comes in a pair – two stands for your MB1 B pair. If you prefer a slimmer, single-column stand, you'll find it in the \u003ca href=\"\/en-ch\/products\/scansonichdsinglestand\"\u003eSingle Stand\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Twin Stand for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns or is planning a pair of Scansonic HD MB1 B and wants to set it up cleanly, both sonically and visually. Plain talk: the Twin Stand is tailored to the MB1 B – for other speakers, the mount and proportions may not necessarily fit. We're happy to tell you which solution suits your speakers.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eWith a bookshelf speaker, the right stand isn't an accessory – it's part of the sound. The Twin Stand puts the MB1 B exactly where it belongs. We at HD Zürisee in Wädenswil advise you on placement and height so your MB1 B reaches its full potential.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price applies to the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Speaker stand (pair), fits Scansonic HD MB1 B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e Adjustable aluminium feet in the style of the MB series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e one pair of stands (2 pieces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the price for a pair or a single stand?\u003c\/h3\u003e\n\u003cp\u003eThe Twin Stand is sold as a pair; the stated price applies to two stands – matching a pair of MB1 B. If you prefer the slimmer, single-column version, you'll find it in the \u003ca href=\"\/en-ch\/products\/scansonichdsinglestand\"\u003eSingle Stand\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes the Twin Stand fit any bookshelf speaker?\u003c\/h3\u003e\n\u003cp\u003eIt's developed specifically for the Scansonic HD MB1 B, from the mount right down to the looks. It can work with other speakers but isn't tuned to them. Which stand suits your speakers is something we're happy to discuss with you.\u003c\/p\u003e\n\u003ch3\u003eWhy does the MB1 B need a stand at all?\u003c\/h3\u003e\n\u003cp\u003eAt ear height and decoupled from furniture, a bookshelf speaker plays noticeably more open and precise. A stable stand stops the sideboard from resonating and colouring the sound. The Twin Stand is the clean, tailor-made solution for that.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Scansonic HD Twin Stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know how much placement determines the sound. We at HD Zürisee in Wädenswil advise you personally on stand, height and placement. Call +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Twin Stand belongs under a pair of \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e – above all the MB1 B from the \u003ca href=\"\/en-ch\/collections\/scansonic-hd\"\u003eScansonic HD\u003c\/a\u003e overview. More stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Scansonic HD","offers":[{"title":"Schwarz – Silber","offer_id":53210229768528,"sku":null,"price":858.0,"currency_code":"CHF","in_stock":true},{"title":"Weiss – Silber","offer_id":53210229801296,"sku":null,"price":858.0,"currency_code":"CHF","in_stock":true},{"title":"Schwarz – Schwarz","offer_id":53210229834064,"sku":null,"price":858.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/scansonic-hd-twin-stand-lautsprecher-staender-paaransicht.png?v=1786698938"},{"product_id":"sonoroorchestrastandschwarz","title":"Sonoro Orchestra Stand Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Sonoro Orchestra Stand is a high-quality aluminium speaker stand, made to fit the Sonoro Orchestra Slim, Orchestra and Orchestra Gen. 2 – supplied as a pair.\u003c\/p\u003e\n\u003cp\u003eA good bookshelf speaker stands or falls with its setup. The Orchestra Stand brings the speakers to ear level, decouples them from the floor and hides the cable – so the sound does what you paid for.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Orchestra Stand?\u003c\/h2\u003e\n\u003cp\u003eBecause it matches the Orchestra series in looks and sound. Vibration-damping material on the support surface and in the rear leg keeps unwanted resonance low, height-adjustable feet with lock nut ensure a secure stand even on uneven floors, and cork pads protect the floor. The cable runs invisibly through the rear leg and is secured with silicone plugs. The speakers can be fixed in place against tipping with the included screws. Sturdy aluminium construction with a matte finish – this version in black.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Orchestra Stand for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to set up their Orchestra Slim, Orchestra or Orchestra Gen. 2 properly. To be clear: it's designed to fit these models precisely – for other bookshelf speakers, more universal stands are available. But if you have Orchestra speakers, this is the cleanest and best-looking solution. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: Speaker stand for Sonoro Orchestra Slim \/ Orchestra \/ Orchestra Gen. 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, matte finish\u003c\/li\u003e\n\u003cli\u003eVibration damping: support surface and rear leg\u003c\/li\u003e\n\u003cli\u003eFeet: height-adjustable with lock nut, cork floor protectors\u003c\/li\u003e\n\u003cli\u003eCable routing: inside the rear leg, secured with silicone plugs\u003c\/li\u003e\n\u003cli\u003eSpeaker fixing: screws included\u003c\/li\u003e\n\u003cli\u003eDimensions (W × D × H): 330 × 330 × 649 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6 kg net \/ 6.5 kg gross (per stand)\u003c\/li\u003e\n\u003cli\u003eDeveloped in Germany\u003c\/li\u003e\n\u003cli\u003eIncluded: 1 pair of stands, mounting screws, cork pads, silicone plugs, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre the Orchestra Stands sold individually or as a pair?\u003c\/strong\u003e\u003cbr\u003eAs a pair – you get two stands for your stereo pair in one delivery. The price applies to the pair accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the stands fit all Orchestra models?\u003c\/strong\u003e\u003cbr\u003eThey're designed for the Orchestra Slim, Orchestra and Orchestra Gen. 2 – including matching fixing points and cable routing. For other speakers we recommend a universal stand; just ask us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonoro Orchestra Stand at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause the right setup is what completes your speakers' sound – and we're happy to advise you personally. HD Zürisee in Wädenswil, your specialist shop for great sound. Call us, write to us or reach us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching speakers are the Sonoro \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e (Orchestra Slim\/Gen. 2); a \u003ca href=\"\/en-ch\/collections\/streaming-verstarker\"\u003estreaming amplifier\u003c\/a\u003e like the Maestro pairs nicely too. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/sonoro\"\u003eSonoro\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Sonoro","offers":[{"title":"Default Title","offer_id":52989564944720,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonoro-orchestra-stand-lautsprecher-staender-schwarz-stereopaar.jpg?v=1786702999"},{"product_id":"sonoroorchestrastandsilber","title":"Sonoro Orchestra Stand Speaker Stand, Silver (Pair)","description":"\u003cp\u003eThe Sonoro Orchestra Stand is a high-quality aluminium speaker stand, made to fit the Sonoro Orchestra Slim, Orchestra and Orchestra Gen. 2 – supplied as a pair.\u003c\/p\u003e\n\u003cp\u003eA good bookshelf speaker stands or falls with its setup. The Orchestra Stand brings the speakers to ear level, decouples them from the floor and hides the cable – so the sound does what you paid for.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Orchestra Stand?\u003c\/h2\u003e\n\u003cp\u003eBecause it matches the Orchestra series in looks and sound. Vibration-damping material on the support surface and in the rear leg keeps unwanted resonance low, height-adjustable feet with lock nut ensure a secure stand even on uneven floors, and cork pads protect the floor. The cable runs invisibly through the rear leg and is secured with silicone plugs. The speakers can be fixed in place against tipping with the included screws. Sturdy aluminium construction with a matte finish – this version in silver.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Orchestra Stand for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to set up their Orchestra Slim, Orchestra or Orchestra Gen. 2 properly. To be clear: it's designed to fit these models precisely – for other bookshelf speakers, more universal stands are available. But if you have Orchestra speakers, this is the cleanest and best-looking solution. Sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price shown applies to the pair\u003c\/li\u003e\n\u003cli\u003eType: Speaker stand for Sonoro Orchestra Slim \/ Orchestra \/ Orchestra Gen. 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, matte finish\u003c\/li\u003e\n\u003cli\u003eVibration damping: support surface and rear leg\u003c\/li\u003e\n\u003cli\u003eFeet: height-adjustable with lock nut, cork floor protectors\u003c\/li\u003e\n\u003cli\u003eCable routing: inside the rear leg, secured with silicone plugs\u003c\/li\u003e\n\u003cli\u003eSpeaker fixing: screws included\u003c\/li\u003e\n\u003cli\u003eDimensions (W × D × H): 330 × 330 × 649 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6 kg net \/ 6.5 kg gross (per stand)\u003c\/li\u003e\n\u003cli\u003eDeveloped in Germany\u003c\/li\u003e\n\u003cli\u003eIncluded: 1 pair of stands, mounting screws, cork pads, silicone plugs, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre the Orchestra Stands sold individually or as a pair?\u003c\/strong\u003e\u003cbr\u003eAs a pair – you get two stands for your stereo pair in one delivery. The price applies to the pair accordingly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the stands fit all Orchestra models?\u003c\/strong\u003e\u003cbr\u003eThey're designed for the Orchestra Slim, Orchestra and Orchestra Gen. 2 – including matching fixing points and cable routing. For other speakers we recommend a universal stand; just ask us.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonoro Orchestra Stand at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause the right setup is what completes your speakers' sound – and we're happy to advise you personally. HD Zürisee in Wädenswil, your specialist shop for great sound. Call us, write to us or reach us on WhatsApp.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching speakers are the Sonoro \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e (Orchestra Slim\/Gen. 2); a \u003ca href=\"\/en-ch\/collections\/streaming-verstarker\"\u003estreaming amplifier\u003c\/a\u003e like the Maestro pairs nicely too. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/sonoro\"\u003eSonoro\u003c\/a\u003e collection.\u003c\/p\u003e","brand":"Sonoro","offers":[{"title":"Default Title","offer_id":52989564977488,"sku":null,"price":299.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonoro-orchestra-stand-lautsprecher-staender-silber-stereopaar.jpg?v=1786703011"},{"product_id":"sonoroussp100schwarzglashg","title":"Sonorous SP100-HBLK Speaker Stands, Glossy Black Glass (Pair)","description":"\u003cp\u003eThe Sonorous SP100-HBLK is a pair of speaker stands with a glossy black column and a black glass base plate that brings your bookshelf speakers up to the acoustically correct height.\u003c\/p\u003e\n\u003cp\u003eA good stand is the calling card of your sound system: only at ear height and cleanly decoupled do compact speakers unlock their full potential.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the SP100-HBLK?\u003c\/h2\u003e\n\u003cp\u003eAt a fixed 600 mm height, it brings the tweeters up to ear level so they radiate straight at you – that noticeably sharpens detail and spatial imaging. The included spikes decouple the speaker from the floor: they mechanically separate it from the surface so the energy goes out as sound into the air instead of as vibration into your parquet. The result is a punchier, more precise bass.\u003c\/p\u003e\n\u003cp\u003eThe black glass base plate gives it a low center of gravity and a secure stance, and the integrated cable routing lets the speaker cable disappear inside the column. Your setup ends up looking like the signal comes from nowhere.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of solid stands with a glossy black column that acts like an elegant pedestal for your gear. The stated price is for the complete pair – we don't sell single stands. Each stand holds up to 8 kg, designed for classic bookshelf speakers. They sit securely on the top plate (200 × 150 mm); a few small anti-slip adhesive pads never hurt.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the SP100-HBLK for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with compact bookshelf speakers up to 8 kg who finally wants a real stereo feeling. Honestly: it's not meant for large floorstanding speakers – those stand on their own feet anyway. Glossy black is a bit of a dust magnet, and on parquet you should use protective pads under the spikes so the metal tips don't leave a lasting impression in the wood.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA serious upgrade for any bookshelf speaker: the right height, clean decoupling, an elegant look. If you've had your speakers sitting on the sideboard until now, you'll hear the difference immediately.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (W × H × D): 320 × 600 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTotal height: 600 mm\u003c\/li\u003e\n\u003cli\u003eBase plate (W × D): 320 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 200 × 150 mm\u003c\/li\u003e\n\u003cli\u003eColumn material: Aluminum, glossy black, Ø 60 mm\u003c\/li\u003e\n\u003cli\u003eBase plate material: 8 mm safety glass, black\u003c\/li\u003e\n\u003cli\u003eMaximum load: 8 kg per stand\u003c\/li\u003e\n\u003cli\u003eSpecial features: Integrated cable routing, spikes for decoupling\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 pair (2 stands) – the stated price is for the pair\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2 stands (1 pair), spike set, assembly instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for a pair or per piece?\u003c\/strong\u003e\u003cbr\u003eThe price is for the pair, i.e. two stands. We don't sell single stands. One order, two stands – including the spike set and assembly instructions, so you can get going right away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can my speaker cables be?\u003c\/strong\u003e\u003cbr\u003eThe openings in the column are generously sized. Cables with a cross-section up to 4 mm² fit through without any trouble, which covers practically every HiFi application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the glass plates unbreakable?\u003c\/strong\u003e\u003cbr\u003eYes, Sonorous uses thermally toughened safety glass. It's significantly stronger than ordinary glass and, in the unlikely event of breakage, crumbles into small, blunt pieces instead of sharp shards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I absolutely have to use the spikes?\u003c\/strong\u003e\u003cbr\u003eOn carpet, they're practically essential for a firm stand. On hard flooring you can skip them, but then you lose the acoustic benefit of decoupling – in that case, we recommend the included protective pads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonorous SP100-HBLK from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause speaker placement is our daily business, and we know how much height and decoupling matter to the sound. We'll tell you whether your speakers fit and advise you on the stereo triangle. Just get in touch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind matching speakers under \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf Speakers\u003c\/a\u003e, more stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e, and the right cable at \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonorous","offers":[{"title":"Default Title","offer_id":52989567304016,"sku":null,"price":138.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonorous-sp100-hblk-lautsprecher-staender-schwarzglas-stereopaar.png?v=1786703445"},{"product_id":"sonoroussp100schwarzatzglas","title":"Sonorous SP100 Speaker Stands, Black Etched Glass (Pair)","description":"\u003cp\u003eThe Sonorous SP100-BLKM-BLKC is a pair of speaker stands with a matte black column and a black etched-glass base plate that brings your bookshelf speakers up to the acoustically correct height.\u003c\/p\u003e\n\u003cp\u003eFinally, no glossy drama: the etched glass – chemically treated glass with a fine, matte texture – barely shows fingerprints and looks classy instead of glaring.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the SP100-BLKM-BLKC?\u003c\/h2\u003e\n\u003cp\u003eAt a fixed 600 mm height, the tweeter sits at ear level – that gives you a clear soundstage and precise spatial imaging. The included spikes decouple the speaker from the floor, mechanically separating it from the surface so your parquet doesn't vibrate along as a resonating body. That makes the bass tighter and cleaner – and your neighbors will thank you.\u003c\/p\u003e\n\u003cp\u003eThe matte aluminum column absorbs light reflections, the integrated cable routing lets the speaker cable disappear inside, and the black etched-glass base plate gives it a low, secure stance.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of sturdy stands in understated matte black that fits in discreetly anywhere. The stated price is for the complete pair – we don't sell single stands. Each stand holds up to 8 kg; the top plate (200 × 150 mm) is sized for classic bookshelf speakers. If a speaker overhangs by a few millimeters, that's not a sonic problem as long as the center of gravity stays centered.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the SP100-BLKM-BLKC for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with compact speakers up to 8 kg – and especially for light wood floors, where the matte black forms a nice contrast without looking out of place. Honestly: very bulky high-end monitors can exceed the top plate; measure beforehand if you're unsure. Generally, the SP100 isn't meant for large floorstanding speakers.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe low-maintenance, visually calm version of the SP100: the same acoustic benefits, but matte instead of glossy. Listening in the stereo triangle, it opens up the soundstage and noticeably tightens the bass.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (W × H × D): 320 × 600 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTotal height: 600 mm\u003c\/li\u003e\n\u003cli\u003eBase plate (W × D): 320 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 200 × 150 mm\u003c\/li\u003e\n\u003cli\u003eColumn material: Aluminum, matte black anodized, Ø 60 mm\u003c\/li\u003e\n\u003cli\u003eBase plate material: 8 mm safety glass (etched glass), black\u003c\/li\u003e\n\u003cli\u003eMaximum load: 8 kg per stand\u003c\/li\u003e\n\u003cli\u003eSpecial features: Integrated cable channel, spikes for decoupling\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 pair (2 stands) – the stated price is for the pair\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2 stands (1 pair), mounting hardware, assembly instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I get two stands for the stated price?\u003c\/strong\u003e\u003cbr\u003eYes, the price is for the pair. You get two complete stands with mounting hardware and assembly instructions. We don't sell single stands – stereo only works as a duo, after all.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes my speaker cable fit through the column?\u003c\/strong\u003e\u003cbr\u003eYes, the openings are large enough for standard HiFi cables. Even cables with a larger cross-section can be routed through without trouble, with a bit of care.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the best way to clean the etched glass?\u003c\/strong\u003e\u003cbr\u003eVery simple. A microfiber cloth and a bit of glass cleaner are enough. Since the surface is matte, there's no streaking like with clear glass – a clear maintenance advantage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the stand stand securely on carpet?\u003c\/strong\u003e\u003cbr\u003eYes. The spikes let the stand dig slightly through the pile and find firm footing on the surface beneath. On hard floors, using the protective pads is the best way to avoid scratches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonorous SP100-BLKM-BLKC from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we know from practice how much placement and decoupling contribute to the sound, and we'll tell you honestly whether your speakers fit. We advise you on the ideal position – call or write to us.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind matching speakers under \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf Speakers\u003c\/a\u003e, more stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e, and the right cable at \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonorous","offers":[{"title":"Default Title","offer_id":52989567336784,"sku":null,"price":138.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonorous-sp100-lautsprecher-staender-schwarz-aetzglas-stereopaar.jpg?v=1786703368"},{"product_id":"sonoroussp100weissglaswh","title":"Sonorous SP100-WHT Speaker Stands, White Glass (Pair)","description":"\u003cp\u003eThe Sonorous SP100-WHT is a pair of speaker stands with a white column and a white glass base plate that brings your bookshelf speakers up to the acoustically correct height.\u003c\/p\u003e\n\u003cp\u003eA good speaker stand has to stand like a rock: if it resonates along, you lose precision in the sound.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the SP100-WHT?\u003c\/h2\u003e\n\u003cp\u003eAt a fixed 600 mm height, it brings the tweeter up to ear level, so you hear every detail the way it was mixed. The included spikes decouple the speaker from the floor – they break the connection between speaker and surface, so parquet or laminate doesn't vibrate along as a resonating body. That keeps the bass precise and punchy instead of booming through the whole house.\u003c\/p\u003e\n\u003cp\u003eThe solid white safety-glass base plate gives it a low center of gravity and a firm stance, and the integrated cable routing lets the speaker cable disappear inside the column. The light finish fits discreetly into modern living spaces.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA pair of stable white stands that put your speakers in the right light instead of outshining them. The stated price is for the complete pair – we don't sell single stands, after all your speakers don't stand alone either. Each stand holds up to 8 kg – suited for classic bookshelf speakers. Worried about the floor? Protective pads for the spikes are included.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the SP100-WHT for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with compact speakers up to 8 kg who wants a real stereo feeling – and for bright, purist living spaces where white recedes elegantly. The top plate measures 200 × 150 mm; if your speaker overhangs by a few millimeters, that's not a sonic issue as long as the center of gravity stays centered. Honestly: even a glossy white surface shows dust, a weekly wipe with a microfiber cloth comes with the territory. The SP100 isn't meant for large floorstanding speakers.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe bright version of the SP100 with the same acoustic strengths: the right height, clean decoupling, a calm look. Anyone stepping up from bookshelf speakers to a genuine stereo setup gains audibly in spatial imaging.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (W × H × D): 320 × 600 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTotal height: 600 mm\u003c\/li\u003e\n\u003cli\u003eBase plate (W × D): 320 × 260 mm\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 200 × 150 mm\u003c\/li\u003e\n\u003cli\u003eColumn material: Aluminum, white, Ø 60 mm\u003c\/li\u003e\n\u003cli\u003eBase plate material: 8 mm safety glass, white\u003c\/li\u003e\n\u003cli\u003eMaximum load: 8 kg per stand\u003c\/li\u003e\n\u003cli\u003eSpecial features: Integrated cable channel, spikes for decoupling\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 pair (2 stands) – the stated price is for the pair\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2 stands (1 pair), mounting hardware, assembly instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the price for a pair or a single stand?\u003c\/strong\u003e\u003cbr\u003eThe price is for the complete pair, i.e. two stands. We don't sell single stands. You order once and receive both stands, including mounting hardware, spikes, and assembly instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo my thicker speaker cables fit through the column?\u003c\/strong\u003e\u003cbr\u003eYes, the openings are large enough for most standard cables. Even a larger cross-section up to 4 mm² can be routed through without trouble, with a bit of patience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow stable is the stand on carpet?\u003c\/strong\u003e\u003cbr\u003eVery stable. The spikes let the stand dig through the pile and find firm footing directly on the surface beneath – noticeably more secure than a flat base plate alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the glass plates fragile?\u003c\/strong\u003e\u003cbr\u003eNo, it's thermally toughened safety glass: very sturdy and shatter-resistant. Should it ever break under massive force, it crumbles into small, blunt pieces instead of sharp shards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Sonorous SP100-WHT from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause speaker placement is part of our daily business, and we know what height and decoupling do for the sound. We check whether your speakers fit and advise you on the stereo triangle. Just get in touch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind matching speakers under \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf Speakers\u003c\/a\u003e, more stands under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003eSpeaker Stands\u003c\/a\u003e, and the right cable at \u003ca href=\"\/en-ch\/collections\/kabel\"\u003eCables \u0026amp; Connectors\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonorous","offers":[{"title":"Default Title","offer_id":52989567369552,"sku":null,"price":138.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/sonorous-sp100-wht-lautsprecher-staender-weissglas-stereopaar.png?v=1786703501"},{"product_id":"wharfedaleevo5-1stand","title":"Wharfedale EVO 5.1 Stand Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Wharfedale EVO 5.1 Stand is a 633 mm tall speaker stand made of carbon steel, whose top plate is cut exactly to the footprint of the EVO 5.1.\u003c\/p\u003e\u003cp\u003eA stand is the least spectacular accessory in the hi-fi world, and at the same time one of the most effective. It costs a fraction of a speaker upgrade and often achieves more with a bookshelf speaker.\u003c\/p\u003e\u003ch2\u003eWhy the EVO 5.1 Stand?\u003c\/h2\u003e\u003cp\u003eThis stand gets two things right. First, the height: 633 mm bring the AMT tweeter of the EVO 5.1 to ear height while seated — and an AMT is more particular about vertical alignment than a dome, which you hear immediately in the precision of the soundstage. Second, the mass: 13.5 kg per piece of carbon steel and lacquered MDF give the cabinet a counterpart that doesn't resonate along. The top plate measures 220 × 285 mm and matches the footprint of the 5.1 exactly.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eThe difference to a sideboard isn't a matter of fine detail. Resonating furniture adds a diffuse afterglow to the bass that you only notice once it's gone — then the bass suddenly stands dry, voices detach from the cabinet, and the soundstage gains depth instead of just width.\u003c\/p\u003e\u003ch3\u003eWho is the EVO 5.1 Stand for?\u003c\/h3\u003e\u003cp\u003eFor anyone who can and wants to place an EVO 5.1 freely in the room. Honestly: if your speaker has to go on a shelf for space reasons, the stand won't help you — the included rubber feet are the right path there. And if you rearrange furniture or vacuum regularly, know this: 13.5 kg per piece isn't something you move in passing. These stands are built to be set down and left standing.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eModel-specific, visually matching, mechanically serious — here you're not paying for a design object, but for mass and precise fit. If you're unsure whether the stand is worth it for your setup, ask us: HD Zürisee in Wädenswil, 044 680 22 00 or by WhatsApp.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: Speaker stand, model-specific for Wharfedale EVO 5.1\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 302 × 633 × 350 mm (base plate × total height × depth)\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 220 × 285 mm\u003c\/li\u003e\n\u003cli\u003eBase plate (W × D): 302 × 350 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon steel, base plate with lacquered MDF\u003c\/li\u003e\n\u003cli\u003eSpikes: Hardened carbon steel\u003c\/li\u003e\n\u003cli\u003eFinish: Black lacquered\u003c\/li\u003e\n\u003cli\u003eWeight: 13.5 kg per piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the listed price is for the pair\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 stands, spikes, rubber feet, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes the EVO 5.1 Stand also fit under other bookshelf speakers?\u003c\/h3\u003e\u003cp\u003eThe top plate measures 220 × 285 mm and is cut to the footprint of the EVO 5.1. Similarly sized compact speakers will sit on it securely; with noticeably larger or smaller models, the fit is no longer clean. If in doubt, just ask us — we'll compare the dimensions for you.\u003c\/p\u003e\u003ch3\u003eWill the spikes scratch my parquet floor?\u003c\/h3\u003e\u003cp\u003eNot if you use the included rubber feet — they're designed exactly for sensitive floors like parquet or oiled wood. If you want to use the hard spikes for maximum coupling, additional metal spike discs are recommended. On carpet, the spikes are the better choice anyway.\u003c\/p\u003e\u003ch3\u003eHow much does the stand really contribute sonically?\u003c\/h3\u003e\u003cp\u003eMore than the price suggests. The tweeter comes to ear height and the cabinet stands on 13.5 kg of mass instead of a resonating piece of furniture. The result is drier bass and a noticeably more stable soundstage — the most effective franc you can spend on a bookshelf speaker.\u003c\/p\u003e\u003ch3\u003eWhy buy the Wharfedale EVO 5.1 Stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause buying a speaker is more than an order number. We listen before we recommend: room size, placement, existing amplifier. Add to that years of experience on Lake Zurich, our own technician for installation and service, and a contact person who still picks up the phone later. Write to us or call: 044 680 22 00.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf speakers\u003c\/a\u003e – the matching box, if you still need one\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e – absorbers and discs for sensitive floors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003eSpeaker cables\u003c\/a\u003e – terminated in the right length\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/wharfedale\"\u003eWharfedale\u003c\/a\u003e – the whole EVO 5 series at a glance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wharfedale","offers":[{"title":"Default Title","offer_id":52989578903888,"sku":null,"price":498.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/wharfedale-evo-5-1-stand-lautsprecher-staender-schwarz-paaransicht.png?v=1787133880"},{"product_id":"wharfedaleevo5-2stand","title":"Wharfedale EVO 5.2 Stand Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Wharfedale EVO 5.2 Stand is a 478 mm tall speaker stand made of carbon steel, whose top plate is cut exactly to the footprint of the EVO 5.2.\u003c\/p\u003e\u003cp\u003eAt 497 mm tall and 15 kg, the EVO 5.2 is almost a small floorstander already. That's exactly why what it stands on is no side issue here — and the matching stand is built lower than the one for the 5.1, so the tweeter still lands at ear height.\u003c\/p\u003e\u003ch2\u003eWhy the EVO 5.2 Stand?\u003c\/h2\u003e\u003cp\u003e478 mm of stand plus 497 mm of speaker add up to roughly a metre — putting the AMT tweeter about where your ear sits while seated. The top plate measures 260 × 350 mm and matches the footprint of the 5.2 exactly, so the cabinet sits fully supported across its base. Add to that 13.3 kg per piece of carbon steel and lacquered MDF: enough mass so the drivers' energy goes into sound rather than furniture wobble.\u003c\/p\u003e\u003ch2\u003eWhat you hear\u003c\/h2\u003e\u003cp\u003eOn a hollow shelf, the 5.2 loses exactly what you buy a three-way system for — sharpness of contour in the lower midrange. On the matching stand, the bass turns dry, the mids detach cleanly from the cabinet, and the soundstage gains depth instead of just width.\u003c\/p\u003e\u003ch3\u003eWho is the EVO 5.2 Stand for?\u003c\/h3\u003e\u003cp\u003eFor anyone who can place their EVO 5.2 freely. Honestly: if you have to put the speaker on a shelf, better save the money for cables or an amplifier — even the best stand can't get anything out of a closed shelf compartment. And a note on structural load: 13.3 kg of stand plus 15 kg of speaker is nearly 30 kilos per side. You set that up properly once and don't move it again.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eNot an accessory alibi, but a precisely engineered foundation: the right height, the right contact area, the right mass. If you want to know whether the stand pays off for your seating position, give us a call — at HD Zürisee in Wädenswil, we'll quickly work out the ear height for you.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: Speaker stand, model-specific for Wharfedale EVO 5.2\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 302 × 478 × 350 mm (base plate × total height × depth)\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 260 × 350 mm\u003c\/li\u003e\n\u003cli\u003eBase plate (W × D): 302 × 350 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbon steel, base plate with lacquered MDF\u003c\/li\u003e\n\u003cli\u003eSpikes: Hardened carbon steel\u003c\/li\u003e\n\u003cli\u003eFinish: Black lacquered\u003c\/li\u003e\n\u003cli\u003eWeight: 13.3 kg per piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the listed price is for the pair\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 stands, spikes, rubber feet, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhy is the EVO 5.2 Stand lower than the EVO 5.1 Stand?\u003c\/h3\u003e\u003cp\u003eBecause the speakers are different heights. The EVO 5.2 itself measures 497 mm, the 5.1 only 340 mm. With 478 mm of stand height, the 5.2's tweeter lands at the same ear height as the 5.1 on its 633 mm stand. The two models are therefore not interchangeable.\u003c\/p\u003e\u003ch3\u003eCan I fill the columns with sand?\u003c\/h3\u003e\u003cp\u003ePossible, but usually not necessary. At 13.3 kg per piece, the stand is already very calm. If you want to squeeze out the last bit, you can fill the carbon steel columns and lower the centre of gravity further — but then expect a genuine piece of furniture when you go to move it.\u003c\/p\u003e\u003ch3\u003eAre spikes and rubber feet included?\u003c\/h3\u003e\u003cp\u003eYes, both come with the pair, along with the mounting hardware. The hardened steel spikes couple cleanly on carpet and keep the stand wobble-free; the rubber feet protect parquet and other sensitive floors. For spikes on a hard floor, additional metal spike discs are recommended.\u003c\/p\u003e\u003ch3\u003eWhy buy the Wharfedale EVO 5.2 Stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause with us you don't just get the gear, you get the assessment that goes with it: does it fit your room, does it match your electronics, what's still missing? HD Zürisee is an authorised specialist dealer with our own technician for installation and service — and we're still reachable after you've bought. Call us: 044 680 22 00.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003eBookshelf speakers\u003c\/a\u003e – the matching box, if you still need one\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e – absorbers and discs for sensitive floors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003eSpeaker cables\u003c\/a\u003e – terminated in the right length\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ch\/collections\/wharfedale\"\u003eWharfedale\u003c\/a\u003e – the whole EVO 5 series at a glance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wharfedale","offers":[{"title":"Default Title","offer_id":52989582016848,"sku":null,"price":598.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/wharfedale-evo-5-2-stand-lautsprecher-staender-schwarz-paaransicht.png?v=1787133955"},{"product_id":"yamahasps3000","title":"Yamaha SPS-3000 Speaker Stands (Pair)","description":"\u003cp\u003eThe Yamaha SPS-3000 is a speaker stand designed specifically for the Yamaha NS-3000 bookshelf speaker.\u003c\/p\u003e\u003cp\u003eYou don't spend months building a High-End speaker only to put it on a wobbly, generic stand. That's exactly the gap the SPS-3000 closes – a base that belongs exactly with the NS-3000.\u003c\/p\u003e\u003ch2\u003eWhy the SPS-3000?\u003c\/h2\u003e\u003cp\u003eIts base is a 6 mm thick metal plate on a body of MDF and rubberwood. Vibration-isolating feet decouple the whole thing from the floor, so vibration doesn't travel back into the speaker and blur the sound. Yamaha planned the NS-3000's cabinet rigidity with great care – the stand carries that line consistently through to the floor.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eThe right height, a firm footing, and the clean coupling that a speaker of this class needs to unlock its potential. With the included spikes, you can couple even more firmly to the floor if needed. In short: the unspectacular but decisive foundation on which the NS-3000 first really shows what it can do.\u003c\/p\u003e\u003ch3\u003eWho is the SPS-3000 for? (and who it isn't)\u003c\/h3\u003e\u003cp\u003eFor anyone who owns or is planning to get an NS-3000 – there's simply no better companion piece. Straight talk: the SPS-3000 isn't intended for other bookshelf speakers; its dimensions and fixings are matched to the NS-3000. If you're after a universal stand, you're better served elsewhere.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eNot an accessory to think twice about, but the logical foundation for the NS-3000. If you take the speaker seriously, you put it on this – and hear the difference from a compromise stand.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price is for the pair\u003c\/li\u003e\n\u003cli\u003eFits: Yamaha NS-3000\u003c\/li\u003e\n\u003cli\u003eConstruction: 6 mm metal top plate on MDF\/rubberwood, vibration-isolating feet\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 306 × 648 × 401 mm (with spikes), 306 × 629 × 401 mm (without spikes)\u003c\/li\u003e\n\u003cli\u003eWeight: 15.3 kg each\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eIncluded: two stands (pair), spikes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the SPS-3000 supplied as a pair?\u003c\/strong\u003e\u003cbr\u003eYes. The stated price is for the pair, i.e. two stands – one per speaker. That way both NS-3000s stand on the identical base developed for them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SPS-3000 also fit other speakers?\u003c\/strong\u003e\u003cbr\u003eNo, it's specifically tailored to the NS-3000. Height, top plate, and fixings are matched to this speaker. For other models, you should choose a suitable stand – we're happy to help you choose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a dedicated stand instead of an affordable standard model?\u003c\/strong\u003e\u003cbr\u003eBecause a speaker only sounds as good as its coupling. A resonating or wobbly stand blurs precision and bass. The SPS-3000 decouples cleanly and holds the NS-3000 at exactly the right height.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the SPS-3000 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we think of the NS-3000 and its stand as a unit. As an authorized Yamaha dealer in Wädenswil, we advise you on the right placement, deliver on request, and set up your system correctly on site – so everything works together in the end.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the matching \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, other \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, or the entire \u003ca href=\"\/en-ch\/collections\/yamaha\"\u003eYamaha range\u003c\/a\u003e in our collections.\u003c\/p\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":52989583163728,"sku":null,"price":2998.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/yamaha-sps-3000-lautsprecher-staender-paaransicht.png?v=1787213442"},{"product_id":"yamahasps5000","title":"Yamaha SPS-5000 Speaker Stands (Pair)","description":"\u003cp\u003eThe Yamaha SPS-5000 is a speaker stand designed specifically for the Yamaha NS-5000 High-End speaker.\u003c\/p\u003e\u003cp\u003eFor a speaker like the NS-5000, the right stand isn't an accessory, it's part of the design. Yamaha developed the SPS-5000 through simulation just as rigorously as the speaker itself.\u003c\/p\u003e\u003ch2\u003eWhy the SPS-5000?\u003c\/h2\u003e\u003cp\u003eFour solid aluminum legs support the NS-5000, each mounted at a 42° angle to the baffle to effectively minimize reflections from the speaker. The whole thing weighs around 8 kg, giving it a vibration resistance that pushes speaker-induced vibration down to a minimum. Not a random product, but the result of extensive simulation analysis.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eExactly the right height: with spikes, the NS-5000 stands at 304 mm, so the tweeter plays at the ear height of a seated listener while minimizing floor reflections. Height adjusters compensate for uneven floors, the spikes can be swapped for rubber feet, and special screws fix the speaker firmly to the stand. All so the NS-5000 stands as if it grew there.\u003c\/p\u003e\u003ch3\u003eWho is the SPS-5000 for? (and who it isn't)\u003c\/h3\u003e\u003cp\u003eFor every NS-5000 owner – there simply isn't a more sensible base. Straight talk: as a universal stand for any bookshelf speaker, the SPS-5000 is overkill and its fixings are tailored to the NS-5000. If you don't have an NS-5000, you don't need it.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eThe NS-5000 deserves this foundation – and rewards it with stable imaging and clean bass. For a speaker of this class, the right stand isn't optional, it's mandatory.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the stated price is for the pair\u003c\/li\u003e\n\u003cli\u003eFits: Yamaha NS-5000\u003c\/li\u003e\n\u003cli\u003eConstruction: four solid aluminum legs (42° to the baffle), height adjusters, steel-cut spikes\u003c\/li\u003e\n\u003cli\u003eHeight with spikes: 304 mm (tweeter at ear height)\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 393 × 304 × 376 mm (with spikes), 393 × 285 × 376 mm (without spikes)\u003c\/li\u003e\n\u003cli\u003eWeight: 8.0 kg each\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eIncluded: two stands (pair), spikes, height adjusters\/spacers, mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIs the SPS-5000 supplied as a pair?\u003c\/strong\u003e\u003cbr\u003eYes. The price is for the pair, i.e. two stands – one per speaker. That way both NS-5000s stand on an identical, precisely matched base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy is the SPS-5000 designed for exactly 304 mm?\u003c\/strong\u003e\u003cbr\u003eSo that the NS-5000's tweeter plays at the ear height of a seated listener. That's a bit higher than typical bookshelf speaker stands and also minimizes disruptive floor reflections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the SPS-5000 also fit other speakers?\u003c\/strong\u003e\u003cbr\u003eNo, it's specifically engineered for the NS-5000 – from the height down to the screw mounting. For other speakers there are better-suited stands, and we're happy to help you choose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the SPS-5000 at HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause we see the NS-5000 and SPS-5000 as a unit. As an authorized Yamaha specialist dealer in Wädenswil, we advise you on placement, deliver your system, and set it up on site on request – including correct coupling and alignment.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eYou'll find the matching \u003ca href=\"\/en-ch\/collections\/lautsprecher\"\u003espeakers\u003c\/a\u003e, other \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, or the entire \u003ca href=\"\/en-ch\/collections\/yamaha\"\u003eYamaha range\u003c\/a\u003e in our collections.\u003c\/p\u003e","brand":"Yamaha","offers":[{"title":"Default Title","offer_id":52989583196496,"sku":null,"price":2398.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/yamaha-sps-5000-lautsprecher-staender-paaransicht.png?v=1787213455"},{"product_id":"scansonichdsinglestand","title":"Scansonic HD Single Stand Speaker Stand (Pair)","description":"\u003cp\u003eThe Scansonic HD Single Stand is a single-column speaker stand for the Scansonic HD MB1 B bookshelf speaker, sold in pairs and fitted with adjustable aluminium feet in the style of the MB series.\u003c\/p\u003e\n\u003cp\u003eA good bookshelf speaker belongs at ear height, cleanly decoupled from the furniture. The Single Stand puts the MB1 B exactly there – slim, calm and a perfect fit.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Single Stand?\u003c\/h2\u003e\n\u003cp\u003eThe Single Stand is the single-column version of the Twin Stand: one slender centre column instead of two pillars, and more unobtrusive in the room. Designed for the Scansonic HD MB1 B, with adjustable aluminium feet and matching proportions. A bookshelf speaker only really opens up on the right stand – stable, decoupled and at the ideal height for the listening position.\u003c\/p\u003e\n\u003cp\u003eAs a pair, you get two stands for your MB1 B pair. Available in matte black and matte white – matching the painted MB finishes.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Single Stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to set up a pair of Scansonic HD MB1 B cleanly, both sonically and visually – and prefers as slim a stand column as possible. Straight talk: if you like it especially stable and solid, go for the Twin Stand. We're happy to tell you which variant suits your speakers and your room.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe right stand isn't an accessory for a bookshelf speaker – it's part of the sound. The Single Stand brings the MB1 B to ear height – slim in appearance, clean in its coupling. We at HD Zürisee in Wädenswil advise you on height, placement and the choice between Single and Twin Stand.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the listed price is for the pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand (pair, single-column), fits the Scansonic HD MB1 B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e matte black or matte white (your choice)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeet:\u003c\/strong\u003e adjustable aluminium feet in the style of the MB series\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e one pair of stands (2 pieces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the price for a pair or a single stand?\u003c\/h3\u003e\n\u003cp\u003eThe Single Stand is sold as a pair; the listed price is for two stands – matching one MB1 B pair. It carries the name \"Single\" because of its single centre column, not because of the quantity.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the Single Stand and the Twin Stand?\u003c\/h3\u003e\n\u003cp\u003eThe Single Stand has a slim centre column, the Twin Stand has two pillars. The Twin looks more substantial and is the sturdier solution, the Single is more unobtrusive and lighter in the room. Sonically both serve the same purpose: a stable, decoupled setup at ear height.\u003c\/p\u003e\n\u003ch3\u003eDoes the Single Stand fit any bookshelf speaker?\u003c\/h3\u003e\n\u003cp\u003eIt's matched to the Scansonic HD MB1 B, from the mounting to the look. It can work with other speakers, but it isn't designed for them. We're happy to clarify which stand suits your speakers in a conversation.\u003c\/p\u003e\n\u003ch3\u003eWhich colour should I choose?\u003c\/h3\u003e\n\u003cp\u003eMatte black and matte white are sonically identical – choose based on your speaker and décor. A white MB1 B usually suits matte white, a black one matte black. It's purely a matter of taste.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Scansonic HD Single Stand from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause placement determines the sound. We at HD Zürisee in Wädenswil advise you in person on stand, height and placement. Call us on +41 44 680 22 00, WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or shop@hdzuerisee.ch.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe Single Stand belongs under a pair of \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e – above all the MB1 B from the \u003ca href=\"\/en-ch\/collections\/scansonic-hd\"\u003eScansonic HD\u003c\/a\u003e overview. More stands can be found under \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Scansonic HD","offers":[{"title":"Schwarz","offer_id":53182329913680,"sku":null,"price":698.0,"currency_code":"CHF","in_stock":true},{"title":"Weiss","offer_id":53182329946448,"sku":null,"price":698.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/scansonic-hd-single-stand-lautsprecher-staender-paaransicht.jpg?v=1786698977"},{"product_id":"vestlyd-v15c-stand-schwarz-paar","title":"Vestlyd V15C Stand, Black (Pair)","description":"\u003cp\u003eThe Vestlyd V15C Stand is the perfectly matched floor stand for the Vestlyd V15C: an open frame in powder-coated steel that raises the floorstanding speaker to the optimal listening height for its coaxial driver and acoustically decouples it from the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy this stand?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEven a floorstanding speaker sounds better when it isn't sitting rigidly on the floor: the V15C Stand lifts the speaker just slightly, provides a defined contact point via rubber feet, and stops the floor from resonating as an extra surface. The understated Danish design in matte black steel sits unobtrusively under the speaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 floor stands (1 pair) – a perfect fit for the Vestlyd V15C\u003c\/li\u003e\n\u003cli\u003ePowder-coated steel, matte black finish\u003c\/li\u003e\n\u003cli\u003eRubber feet to decouple from the floor\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatibility: exclusively for the Vestlyd V15C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price applies to both\u003c\/li\u003e\n\u003cli\u003eDimensions: 24.2 × 44 × 40 cm (H × W × D)\u003c\/li\u003e\n\u003cli\u003eWeight: 9 kg (net weight, pair)\u003c\/li\u003e\n\u003cli\u003eMaterial: powder-coated steel\u003c\/li\u003e\n\u003cli\u003eFinish: black, matte\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the stand also fit the V12C?\u003c\/h3\u003e\u003cp\u003eNo. The V15C Stand is matched to the footprint and weight of the V15C. For the V12C there's the slightly smaller Vestlyd V12C Stand.\u003c\/p\u003e\u003ch3\u003eDo I even need the stand, since the V15C already stands on its own feet?\u003c\/h3\u003e\u003cp\u003eIt's not required, but it makes sense: it provides a defined, decoupled stance and a uniform look – especially on parquet or tile, the difference is noticeable both sonically and visually.\u003c\/p\u003e\u003ch3\u003eIs the stand delivered singly or as a pair?\u003c\/h3\u003e\u003cp\u003eAs a pair – matching your two V15C speakers. The listed price applies to both stands together.\u003c\/p\u003e\u003ch3\u003eWhy buy the Vestlyd V15C Stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we'll tell you honestly whether the stand is worthwhile for your setup, and deliver it together with the speakers if needed. HD Zürisee in Wädenswil is an authorised Vestlyd dealer. Call us on +41 44 680 22 00, write to shop@hdzuerisee.ch or reach us via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching speaker: \u003ca href=\"\/en-ch\/collections\/vestlyd\"\u003eVestlyd V15C\u003c\/a\u003e. More models in our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vestlyd","offers":[{"title":"Default Title","offer_id":53610411917648,"sku":null,"price":249.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vestlyd-v15c-stand-schwarz-frontansicht.png?v=1789400165"},{"product_id":"vestlyd-v12c-stand-schwarz-paar","title":"Vestlyd V12C Stand, Black (Pair)","description":"\u003cp\u003eThe Vestlyd V12C Stand is the perfectly matched floor stand for the Vestlyd V12C: an open frame in powder-coated steel that raises the floorstanding speaker to the optimal listening height for its coaxial driver and acoustically decouples it from the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy this stand?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEven a floorstanding speaker sounds better when it isn't sitting rigidly on the floor: the V12C Stand lifts the speaker just slightly, provides a defined contact point via rubber feet, and stops the floor from resonating as an extra surface. The understated Danish design in matte black steel sits unobtrusively under the speaker.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 floor stands (1 pair) – a perfect fit for the Vestlyd V12C\u003c\/li\u003e\n\u003cli\u003ePowder-coated steel, matte black finish\u003c\/li\u003e\n\u003cli\u003eRubber feet to decouple from the floor\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatibility: exclusively for the Vestlyd V12C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price applies to both\u003c\/li\u003e\n\u003cli\u003eDimensions: 24.2 × 37 × 35 cm (H × W × D)\u003c\/li\u003e\n\u003cli\u003eWeight: 8 kg (net weight, pair)\u003c\/li\u003e\n\u003cli\u003eMaterial: powder-coated steel\u003c\/li\u003e\n\u003cli\u003eFinish: black, matte\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the stand also fit the V15C?\u003c\/h3\u003e\u003cp\u003eNo. The V12C Stand is matched to the footprint and weight of the V12C. For the V15C there's the slightly larger Vestlyd V15C Stand.\u003c\/p\u003e\u003ch3\u003eDo I even need the stand, since the V12C already stands on its own feet?\u003c\/h3\u003e\u003cp\u003eIt's not required, but it makes sense: it provides a defined, decoupled stance and a uniform look – especially on parquet or tile, the difference is noticeable both sonically and visually.\u003c\/p\u003e\u003ch3\u003eIs the stand delivered singly or as a pair?\u003c\/h3\u003e\u003cp\u003eAs a pair – matching your two V12C speakers. The listed price applies to both stands together.\u003c\/p\u003e\u003ch3\u003eWhy buy the Vestlyd V12C Stand at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we'll tell you honestly whether the stand is worthwhile for your setup, and deliver it together with the speakers if needed. HD Zürisee in Wädenswil is an authorised Vestlyd dealer. Call us on +41 44 680 22 00, write to shop@hdzuerisee.ch or reach us via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching speaker: \u003ca href=\"\/en-ch\/collections\/vestlyd\"\u003eVestlyd V12C\u003c\/a\u003e. More models in our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vestlyd","offers":[{"title":"Default Title","offer_id":53610412605776,"sku":null,"price":219.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vestlyd-v12c-stand-schwarz-frontansicht.png?v=1789400184"},{"product_id":"bluesound-fs230-standfuss-pulse-m-pulse-flex-schwarz","title":"Bluesound FS230 Floor Stand Pulse M \/ Pulse Flex, Black","description":"\u003cp\u003eThe Bluesound floor stand for Pulse M and Pulse Flex offers maximum placement flexibility – as a single speaker, as a stereo pair, or as a rear channel in a surround setup. The height adjusts steplessly, and a built-in cable channel keeps things looking clean.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eThe sturdy, satin-finished steel construction safely carries your Pulse M or Pulse Flex at ear height – regardless of whether there happens to be a shelf right there or not. The built-in cable channel routes power and network cables invisibly from the base up to the speaker.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Bluesound Pulse M, Pulse Flex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustable:\u003c\/strong\u003e 633–1108 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 294 × 294 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e steel, satin finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs this the \"FS231\" from the supplier list?\u003c\/h3\u003e\n\u003cp\u003eYes, in the manufacturer's supplier list this stand appears under the name \"FS231\". The manufacturer's official Shopify product name is FS230 – one and the same product, just with a different internal designation.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit the Pulse 2i?\u003c\/h3\u003e\n\u003cp\u003eOfficially it's designed for the Pulse M and Pulse Flex. We couldn't find a matching Bluesound stand for the Pulse 2i – get in touch if you're looking for something specific there.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Bluesound stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you whether the stand is worthwhile for your setup and can supply it together with your speaker on request. Call us at +41 44 680 22 00, email shop@hdzuerisee.ch or reach us via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYour Bluesound Pulse M or Pulse Flex, plus the full \u003ca href=\"\/en-ch\/collections\/bluesound\"\u003eBluesound multi-room world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bluesound","offers":[{"title":"Default Title","offer_id":53612688212304,"sku":null,"price":189.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bluesound-fs230-standfuss-schwarz.png?v=1789415592"},{"product_id":"bluesound-fs230-standfuss-pulse-m-pulse-flex-weiss","title":"Bluesound FS230 Floor Stand Pulse M \/ Pulse Flex, White","description":"\u003cp\u003eThe Bluesound floor stand for Pulse M and Pulse Flex offers maximum placement flexibility – as a single speaker, as a stereo pair, or as a rear channel in a surround setup. The height adjusts steplessly, and a built-in cable channel keeps things looking clean.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eThe sturdy, satin-finished steel construction safely carries your Pulse M or Pulse Flex at ear height – regardless of whether there happens to be a shelf right there or not. The built-in cable channel routes power and network cables invisibly from the base up to the speaker.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Bluesound Pulse M, Pulse Flex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight adjustable:\u003c\/strong\u003e 633–1108 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 294 × 294 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e steel, satin finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs this the \"FS231\" from the supplier list?\u003c\/h3\u003e\n\u003cp\u003eYes, in the manufacturer's supplier list this stand appears under the name \"FS231\". The manufacturer's official Shopify product name is FS230 – one and the same product.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit the Pulse 2i?\u003c\/h3\u003e\n\u003cp\u003eOfficially it's designed for the Pulse M and Pulse Flex. We couldn't find a matching Bluesound stand for the Pulse 2i.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Bluesound stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you whether the stand is worthwhile for your setup and can supply it together with your speaker on request. Call us at +41 44 680 22 00, email shop@hdzuerisee.ch or reach us via WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYour Bluesound Pulse M or Pulse Flex, plus the full \u003ca href=\"\/en-ch\/collections\/bluesound\"\u003eBluesound multi-room world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bluesound","offers":[{"title":"Default Title","offer_id":53612688245072,"sku":null,"price":189.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/bluesound-fs230-standfuss-weiss.png?v=1789415592"},{"product_id":"canton-basic-ls-lautsprecherstander-schwarz-hochglanz-paar","title":"Canton Basic LS Speaker Stand, Black High Gloss (Pair)","description":"\u003cp\u003eThe Canton Basic LS is a speaker stand for compact speakers that brings your boxes to listening height and acoustically decouples them from the floor.\u003c\/p\u003e\n\u003cp\u003eSo not a speaker itself, but the piece of furniture behind it – and still one of the components that most decides the actual sound of a bookshelf speaker. In black high gloss, the Basic LS is the most refined of the three Canton finishes: a smooth, mirror-like column that visually disappears next to high-gloss speakers (such as from the Canton Vento or GLE range), rather than pushing itself forward.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton Basic LS?\u003c\/h2\u003e\n\u003cp\u003eBecause a compact speaker on the sideboard, on a shelf, or – worse still – directly on the carpet, is acoustically at the wrong address. The Basic LS brings the tweeter to ear height, decouples the box from the surface, and so delivers a clean, undamped bass that the same box on a shelf never provides. The cable routing runs concealed inside the column – no clutter, no trip hazard, just a tidy look.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo sturdy columns with height-adjustable spikes that also provide secure, tip-proof footing on uneven parquet or thick carpet. The cable routing is inside, leaving only the glossy column visible. Anyone who's ever tried to hide a speaker cable behind a stand knows why that's a real argument – not just a brochure line.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton Basic LS for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns a compact speaker (not just from Canton) and wants to position it properly, instead of setting it down somewhere provisionally. Plain talk: if you're planning to build your speakers into a shelf anyway, you can skip the Basic LS – no stand in the world helps there. And if you're allergic to high-gloss lacquer (fingerprints, dust, every reflection of light), you're better served by the satin variant.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand is rarely the most exciting item on the hi-fi shelf – but often the most underrated. The Basic LS does its job quietly, stably, and without pushing itself into the foreground, exactly as a good piece of furniture should. At HD Zürisee in Wädenswil we put together stand and speaker for you, so that in the end both fit – height, looks, and sound.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for compact speakers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e concealed cable routing inside the column, height-adjustable spikes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 26 × 57 × 34 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 7.0 kg shipping weight per unit (net weight not published by the manufacturer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2× Basic LS speaker stands, height-adjustable spikes, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers does the Canton Basic LS fit?\u003c\/h3\u003e\n\u003cp\u003eThe Basic LS is a universal stand for compact or bookshelf speakers, not just Canton models. What matters is your speaker's footprint and weight, not the brand. We'll check with you whether your specific model fits before you order.\u003c\/p\u003e\n\u003ch3\u003eDoes the Basic LS stand securely on carpet too?\u003c\/h3\u003e\n\u003cp\u003eYes. The height-adjustable spikes compensate for small unevennesses and provide a secure, tip-free stance on carpet or uneven parquet too. On parquet or tile we additionally recommend small felt pads, so nothing gets scratched.\u003c\/p\u003e\n\u003ch3\u003eCan I route the speaker cable invisibly?\u003c\/h3\u003e\n\u003cp\u003eThat's exactly what the cable routing inside the column is for: the cable disappears into the stand and only re-emerges at the top by the speaker. Only the smooth column stays visible, no loose cables on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the Basic LS supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair – two stands for your stereo setup. Canton itself lists the Basic LS per unit; we put it together for you to match your two speakers.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Basic LS from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the right stand height and cable routing belong to the sound, not just the looks – and that's exactly part of our advice. Our experienced specialist team in Wädenswil tunes stand and speaker together to your room. Give us a call or drop us a quick message.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e from the Canton range, plus decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e for the concealed routing. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628505391440,"sku":"CANTON-04472","price":438.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/Basic_LS_schwarz_hochglanz_frontal_2025_1920x1920_3f0c1d6a-d6ab-409e-8d43-7ece0a85f593.png?v=1789722447"},{"product_id":"canton-basic-ls-lautsprecherstander-schwarz-matt-paar","title":"Canton Basic LS Speaker Stand, Black Matte (Pair)","description":"\u003cp\u003eThe Canton Basic LS is a speaker stand for compact speakers that brings your boxes to listening height and acoustically decouples them from the floor.\u003c\/p\u003e\n\u003cp\u003eNot a speaker itself, but the piece of furniture behind it – and still one of the components that most decides the actual sound of a bookshelf speaker. In black satin, the Basic LS is the most discreet of the three finishes: no reflections, no fingerprints, simply a solid base that does its job and nothing else.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton Basic LS?\u003c\/h2\u003e\n\u003cp\u003eBecause a compact speaker on the sideboard or directly on the floor is acoustically in the wrong place. The Basic LS brings the tweeter to ear height and decouples the box from the surface, which makes bass and imaging noticeably cleaner than any improvised setup. Let's be honest: the most expensive box does little good if it ends up sitting on a wobbly stack of books.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo sturdy columns with height-adjustable spikes for secure footing on parquet, tile, or carpet, plus cable routing that disappears completely inside the column. The satin surface absorbs reflections and forgives the occasional fingerprint when moving it around.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton Basic LS for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns a compact speaker and wants to take it seriously – regardless of the box's brand. Plain talk: speakers built into an existing shelf don't need a stand; you're better off saving that money for a better cable. If you don't like the matte look and prefer gloss, go for the high-gloss finish.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand rarely sells on emotion, but on what it gets right in the background: standing, decoupling, hiding cables. The Basic LS does exactly that, without any frills. At HD Zürisee in Wädenswil we look at stand and speaker together, so the height ultimately suits your sofa and not just the brochure.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: speaker stand for compact speakers\u003c\/li\u003e\n\u003cli\u003eFeatures: concealed cable routing inside the column, height-adjustable spikes\u003c\/li\u003e\n\u003cli\u003eDimensions (W×H×D): 26 × 57 × 34 cm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 7.0 kg shipping weight per unit (net weight not published by the manufacturer)\u003c\/li\u003e\n\u003cli\u003eFinish: black satin\u003c\/li\u003e\n\u003cli\u003eSales unit: pair (2 stands)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2× Basic LS speaker stands, height-adjustable spikes, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers does the Canton Basic LS fit?\u003c\/h3\u003e\n\u003cp\u003eThe Basic LS is a universal stand for compact or bookshelf speakers, not tied to a brand. What matters is your speaker's footprint and weight. We're happy to check with you in advance whether your model fits.\u003c\/p\u003e\n\u003ch3\u003eDoes the Basic LS stand securely on carpet too?\u003c\/h3\u003e\n\u003cp\u003eYes, the height-adjustable spikes compensate for small unevennesses and provide a secure, tip-free stance on carpet too. On sensitive floors, felt pads are also worthwhile.\u003c\/p\u003e\n\u003ch3\u003eCan I route the speaker cable invisibly?\u003c\/h3\u003e\n\u003cp\u003eYes, the cable routing runs inside the column and only re-emerges at the top by the speaker. No loose cables are left lying on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the Basic LS supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair for your stereo setup. Canton itself lists the Basic LS per unit; we put it together for you finished as a pair.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Basic LS from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause stand height and cable routing shape the sound just as much as the box itself – and that's exactly what we look at in our advice. Our specialist team in Wädenswil tunes stand and speaker together to your room. Give us a call or drop us a quick message.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e from the Canton range, plus decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e for the concealed routing. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628505850192,"sku":"CANTON-04473","price":438.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/Basic_LS_schwarz_matt_frontal_2025_1920x1920_f6a119e5-83fb-414f-9f38-b8a9107a7c03.png?v=1789722456"},{"product_id":"canton-basic-ls-lautsprecherstander-weiss-matt-paar","title":"Canton Basic LS Speaker Stand, White Matte (Pair)","description":"\u003cp\u003eThe Canton Basic LS is a speaker stand for compact speakers that brings your boxes to listening height and acoustically decouples them from the floor.\u003c\/p\u003e\n\u003cp\u003eNot a speaker itself, but the piece of furniture behind it – yet one that has a real say in the sound of any bookshelf speaker. In white satin, the Basic LS is the right choice for bright living rooms and white boxes, when a black stand would look like a foreign body.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton Basic LS?\u003c\/h2\u003e\n\u003cp\u003eBecause a compact speaker sitting on the sideboard or bookshelf never quite settles acoustically. The Basic LS brings the tweeter to ear height and decouples the box from the surface, which noticeably improves bass and imaging. Anyone who's tried to fake the right height with books knows it rarely ends up neat.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eTwo sturdy columns with height-adjustable spikes that provide secure footing on parquet, tile, or carpet too, plus cable routing that disappears completely inside the column. The white satin surface blends unobtrusively into bright rooms instead of standing out as a black block.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton Basic LS for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns a compact speaker and wants to position it properly, regardless of the box's brand. Plain talk: if you're mounting your speakers permanently into a shelf, you don't need a stand – no base in the world helps there. And if you prefer it darker, the Basic LS is also available in black.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand doesn't sell on big promises, but on whether it stands stably, decouples well, and makes the cables disappear. The Basic LS does exactly that, without pushing itself into the foreground. At HD Zürisee in Wädenswil we put together stand and speaker together, so that in the end height, looks, and sound all fit.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for compact speakers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e concealed cable routing inside the column, height-adjustable spikes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 26 × 57 × 34 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 7.0 kg shipping weight per unit (net weight not published by the manufacturer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e white satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e 2× Basic LS speaker stands, height-adjustable spikes, mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers does the Canton Basic LS fit?\u003c\/h3\u003e\n\u003cp\u003eThe Basic LS is a universal stand for compact or bookshelf speakers, regardless of brand. What matters is your speaker's footprint and weight. We're happy to check with you in advance whether your model fits.\u003c\/p\u003e\n\u003ch3\u003eDoes the Basic LS stand securely on carpet too?\u003c\/h3\u003e\n\u003cp\u003eYes, the height-adjustable spikes compensate for small unevennesses and provide a secure, tip-free stance on carpet too. On sensitive floors we additionally recommend felt pads.\u003c\/p\u003e\n\u003ch3\u003eCan I route the speaker cable invisibly?\u003c\/h3\u003e\n\u003cp\u003eYes, the cable routing runs inside the column and only re-emerges at the top by the speaker. No loose cables are left lying on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the Basic LS supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair for your stereo setup. Canton itself lists it per unit; we deliver it to you finished as a pair.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton Basic LS from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause the right stand height and cable routing are just as much part of the sound result as the box itself – and that's what we look at in our advice. Our experienced specialist team in Wädenswil tunes stand and speaker together to your room. Give us a call or drop us a quick message.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e from the Canton range, plus decent \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e for the concealed routing. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628506177872,"sku":"CANTON-04474","price":438.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/Basic_LS_weiss_matt_frontal_weiss_matt_2025_1920x1920_ebe1afad-c9d1-433d-8f7f-2937be8358fa.png?v=1789722458"},{"product_id":"canton-ls-40-lautsprecherstander-schwarz-paar","title":"Canton LS 40 Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Canton LS 40 is a speaker stand for the active multiroom speakers Canton Smart Soundbox 3 and Smart Libero, which brings the speaker firmly and securely to seated ear height via a screw thread mount.\u003c\/p\u003e\n\u003cp\u003eThis too is a Canton product that never makes a sound of its own: no driver, no electronics, just a sturdy metal base with an elegant, satin finish. If you own a Smart Soundbox 3 or a Smart Libero and it's been sitting on the sideboard so far, the LS 40 gives it the matching plinth – built specifically for these two models, not as a universal stand for just any speaker.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton LS 40?\u003c\/h2\u003e\n\u003cp\u003eBecause a multiroom speaker on the sideboard rarely sits where it sounds best – usually too low, often too close to the wall. The LS 40 screws the speaker to a defined height designed for ear level while seated, turning a casual placement into a deliberate one. Cable routing runs concealed inside the stand column, leaving only the speaker itself visible.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA sturdy, low-vibration metal base with screw-thread mount, tailored exactly for the Smart Soundbox 3 and Smart Libero, plus concealed internal cable routing. The height is designed for relaxed seated listening, not for whatever corner it barely fits into.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton LS 40 for?\u003c\/h3\u003e\n\u003cp\u003eFor owners of the Smart Soundbox 3 or the Smart Libero who want to place their speaker permanently instead of constantly repositioning it. Plain talk: the screw thread doesn't fit other Canton models or third-party speakers – for that, there's the more universal Basic LS or the LS 90.3. If you're mounting the speaker on a shelf anyway, you simply don't need this stand.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand with exactly one job, done right: bringing the Smart Soundbox 3 or Smart Libero permanently and securely to listening height. Not an off-the-shelf accessory, but a precisely matched addition. At HD Zürisee in Wädenswil, we're happy to show you how much difference a few centimetres of height actually make to the sound.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for Canton Smart Soundbox 3 and Smart Libero\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e screw-thread mount\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e concealed cable routing, sturdy metal base, low-vibration stand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 25 × 92 × 25 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 kg each\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black satin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2× LS 40 mounting kit, installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers fit the Canton LS 40?\u003c\/h3\u003e\n\u003cp\u003eSpecifically the Canton Smart Soundbox 3 and the Smart Libero – the speaker is secured to the stand via a screw thread. This mount doesn't fit other models; for those, there are better-suited stands like the Basic LS.\u003c\/p\u003e\n\u003ch3\u003eWhat height does the LS 40 bring the speaker to?\u003c\/h3\u003e\n\u003cp\u003e92 cm stand height, designed for ear level while seated – ideal for a sofa or armchair. For standing use or a lower seat height, briefly check with us whether that suits your room.\u003c\/p\u003e\n\u003ch3\u003eDoes the speaker cable run visibly?\u003c\/h3\u003e\n\u003cp\u003eNo, the cable routing is concealed inside the stand column. Only the speaker on the base remains visible, with no loose cables on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the LS 40 supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair, for two Smart Soundbox 3 or Smart Libero units in stereo or multiroom use. It's also available individually on request – just ask us.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton LS 40 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know which height and wall distance actually make a difference with multiroom speakers, and not just from a datasheet. Our specialist team in Wädenswil advises you on placement and networking your Canton Smart devices. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching active multiroom speakers in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e, plus \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e and further \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628506702160,"sku":"CANTON-04710","price":338.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/LS_40_schwarz_frontal_2026_1920x1920_f7cf7b27-8820-4434-afa4-275f65d5a8e6.png?v=1789722460"},{"product_id":"canton-ls-40-lautsprecherstander-weiss-paar","title":"Canton LS 40 Speaker Stand, White (Pair)","description":"\u003cp\u003eThe Canton LS 40 is a speaker stand for the active multiroom speakers Canton Smart Soundbox 3 and Smart Libero, which brings the speaker firmly and securely to seated ear height via a screw thread mount.\u003c\/p\u003e\n\u003cp\u003eNo driver, no electronics – just a sturdy metal base in white satin that matches perfectly with the light-coloured versions of the Smart Soundbox 3 and Smart Libero. If your speaker has been sitting on the sideboard so far, the LS 40 gives it the matching plinth, built specifically for these two models.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton LS 40?\u003c\/h2\u003e\n\u003cp\u003eBecause a multiroom speaker on the sideboard rarely sits where it sounds best. The LS 40 brings the speaker to a defined height, designed for ear level while seated, turning a casual placement into a deliberate one. Cable routing runs concealed inside the stand column, leaving only the speaker visible.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA sturdy, low-vibration metal base with screw-thread mount, tailored exactly for the Smart Soundbox 3 and Smart Libero, plus concealed cable routing. The white satin look blends in discreetly next to light-coloured furniture and white walls.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton LS 40 for?\u003c\/h3\u003e\n\u003cp\u003eFor owners of the white Smart Soundbox 3 or Smart Libero who want to place their speaker permanently rather than provisionally. Plain talk: the screw thread doesn't fit third-party speakers or other Canton models – for that, more universal stands like the Basic LS are better suited. If you're mounting your speaker in a shelf, you save yourself this stand.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand with exactly one job: bringing the Smart Soundbox 3 or Smart Libero permanently and securely to listening height, with no compromise on looks. At HD Zürisee in Wädenswil, we show you how much difference these few centimetres of height actually make – sometimes more than you'd expect from a metal column.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for Canton Smart Soundbox 3 and Smart Libero\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e screw-thread mount\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e concealed cable routing, sturdy metal base, low-vibration stand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 25 × 92 × 25 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.2 kg each\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e white satin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2× LS 40 mounting kit, installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speakers fit the Canton LS 40?\u003c\/h3\u003e\n\u003cp\u003eSpecifically the Canton Smart Soundbox 3 and the Smart Libero, which are secured to the stand via a screw thread. Other models don't fit this mount; for those, more universal stands like the Basic LS are better suited.\u003c\/p\u003e\n\u003ch3\u003eWhat height does the LS 40 bring the speaker to?\u003c\/h3\u003e\n\u003cp\u003e92 cm, designed for ear level while seated, so suited to a sofa or armchair. For other seat heights, briefly check with us beforehand whether that suits your room.\u003c\/p\u003e\n\u003ch3\u003eDoes the speaker cable run visibly?\u003c\/h3\u003e\n\u003cp\u003eNo, the cable routing is concealed inside the stand column. Only the speaker remains visible, with no loose cables on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the LS 40 supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair, for two Smart Soundbox 3 or Smart Libero units in stereo or multiroom use. Individually on request too – just ask us.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton LS 40 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know from experience which height and placement actually make a difference with multiroom speakers. Our specialist team in Wädenswil advises you on placement and networking your Canton Smart devices. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching active multiroom speakers in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e, plus \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e and further \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628507554128,"sku":"CANTON-04711","price":338.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/LS_40_weiss_frontal_2026_1920x1920_60bdd09a-c235-4d36-98ec-a2b2ef17a63b.png?v=1789722462"},{"product_id":"canton-ls-90-3-lautsprecherstander-schwarz-paar","title":"Canton LS 90.3 Speaker Stand, Black (Pair)","description":"\u003cp\u003eThe Canton LS 90.3 is a speaker stand for compact speakers, which fits, among others, the Canton Plus MX.3 as well as the Movie series (Movie 75, Movie 95, Movie 135, Movie 165).\u003c\/p\u003e\n\u003cp\u003eHere too: no sound of its own, but a big influence on the sound of the speaker sitting on top. The LS 90.3 brings small compact speakers to a sensible stand height and decouples them from the floor, instead of leaving them on the sideboard next to the remote control and the plant pot.\u003c\/p\u003e\n\u003ch2\u003eWhy the Canton LS 90.3?\u003c\/h2\u003e\n\u003cp\u003eBecause especially very small effect speakers like the Plus MX.3 tend to get placed just about anywhere without a fixed stand – usually too low, often awkwardly close to the wall. The LS 90.3 gives them a fixed spot at over 90 cm height, with concealed cable routing in the stand column and device feet for a secure footing. Small speakers immediately feel less like a supporting act.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA sturdy stand just under a metre tall with concealed cable routing and device feet, suited to a whole range of compact Canton models. Solid construction instead of a wobbly discount-store build.\u003c\/p\u003e\n\u003ch3\u003eWho is the Canton LS 90.3 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to place a very compact speaker like the Plus MX.3 or a Movie model freely in the room instead of screwing it to the wall. Plain talk: if you're mounting your effect speakers to the wall anyway, you don't need this stand – then the respective speaker's wall bracket is what counts.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn unassuming but sensible building block for anyone who wants to place small Canton effect speakers freely in the room instead of on the wall. At HD Zürisee in Wädenswil, we tell you honestly whether your model fits the LS 90.3, before you order unnecessarily.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e speaker stand for compact speakers (incl. Plus MX.3, Movie 75\/95\/135\/165)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e concealed cable routing, device feet for a secure stand\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 26 × 93 × 26 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5 kg each\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2× LS 90.3, mounting hardware, device feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich Canton speakers fit the LS 90.3?\u003c\/h3\u003e\n\u003cp\u003eAmong others, the Plus MX.3 as well as the Movie models 75, 95, 135 and 165. Just tell us which speaker you have and whether your specific model fits, and we'll check it for you.\u003c\/p\u003e\n\u003ch3\u003eHow tall is the LS 90.3?\u003c\/h3\u003e\n\u003cp\u003e93 cm, designed for a typical listening position while seated. For very small effect speakers like the Plus MX.3, that's a clear improvement over the sideboard.\u003c\/p\u003e\n\u003ch3\u003eIs the cable routing hidden?\u003c\/h3\u003e\n\u003cp\u003eYes, the cable runs inside the stand column and only emerges again at the top by the speaker. Nothing lies exposed on the floor.\u003c\/p\u003e\n\u003ch3\u003eIs the LS 90.3 supplied as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003eWith us, as a pair for stereo or effect use with two speakers. Canton itself offers it per piece; we deliver it to you ready as a pair.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Canton LS 90.3 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we know which stand fits which speaker, and protect you from a wrong order instead of just selling it to you. Our specialist team in Wädenswil advises you on the right combination. Call us or drop us a line.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e from the Canton range, plus \u003ca href=\"\/en-ch\/collections\/lautsprecherkabel\"\u003espeaker cable\u003c\/a\u003e for the concealed routing. You'll find the whole brand in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCANTON overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default","offer_id":53628508012880,"sku":"CANTON-04171","price":198.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/14020_LS_90_2_schwarz_png.png?v=1789722056"},{"product_id":"canton-stand-for-reference-9-lautsprecherstander-schwarz-klavierlack-paar","title":"Canton Stand for Reference 9 Speaker Stand, Black High-Gloss (Pair)","description":"\u003cp\u003eThe Canton Stand for Reference 9 is a pair of speaker stands in black high-gloss lacquer, drawn up specifically for the Reference 9 bookshelf speaker, with cable routing hidden inside.\u003c\/p\u003e\n\u003cp\u003eNot a universal stand with a drilling pattern for \"most speakers\", but a construction matched exactly to the footprint and weight of the Reference 9. The high-gloss lacquer surface matches the identically named finish of the speaker, making the stand visibly more furniture than accessory.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a reference speaker like the Reference 9 only shows its full potential when it stands at ear height and its surroundings don't resonate along with it. A sideboard rarely delivers both – it usually sits too low and acts as an extra resonating body. The Stand for Reference 9 solves this with 56.5 centimetres of height and hidden cable routing that leaves no visible cable between amplifier and speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 precisely matched stands, exclusively for the Canton Reference 9\u003c\/li\u003e\n\u003cli\u003eBlack high-gloss lacquer finish\u003c\/li\u003e\n\u003cli\u003eHidden, internal cable routing\u003c\/li\u003e\n\u003cli\u003e56.5 cm height for ear-level listening position\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is this stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to place the Reference 9 freestanding in the room, rather than on a sideboard. Straight talk: the stand is built exclusively for the Reference 9 – the mount doesn't fit other bookshelf speakers, even from Canton's own range. If you own a different compact speaker instead, take a look at our other speaker stands.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn accessory you don't need to think twice about: precisely matched, visually coordinated with the speaker, and cleanly solved with hidden cable routing. If you've already invested seriously in the Reference 9, don't let it disappear at half height behind the remote.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Floor stand for Canton Reference 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price stated applies to the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per stand (W × H × D):\u003c\/strong\u003e 34.7 × 56.5 × 47.0 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black high-gloss lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable routing:\u003c\/strong\u003e Hidden, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Exclusively for Canton Reference 9\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the price apply per pair or per single stand?\u003c\/h3\u003e\n\u003cp\u003ePer pair. You get two stands for a stereo pair of Reference 9 speakers, and the stated price covers both together. This product isn't sold individually, since the Reference 9 itself is sold as a stereo pair.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit other Canton bookshelf speakers?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount is designed exactly to the footprint and weight of the Reference 9. Other models, even within the Reference series, have their own stands – for example the Reference Center LS for the centre speaker. Tell us your model and we'll find the right solution.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the speaker cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. The columns route the cable hidden from bottom to top up to the speaker, nothing stays visible. When routing the cable, plan in a little slack in case you want to adjust the placement later.\u003c\/p\u003e\n\u003ch3\u003eDoes high-gloss lacquer differ from the matte finish only visually?\u003c\/h3\u003e\n\u003cp\u003eYes, construction and dimensions are identical for both finishes – high-gloss lacquer is glossy, the matte version silk matte. Which finish suits your Reference 9 and your living room is purely a matter of taste.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Stand for Reference 9 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you beforehand whether a stand or another placement is the better solution for your room. As an experienced specialist team, we also handle delivery and setup on-site in Wädenswil on request. Call or write to us briefly.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFurther models are found among the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and the brand's complete range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53628517646672,"sku":"CANTON-04422","price":598.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/15928_ReferenceLS-schwarz-highgloss-Reference9_png.png?v=1789722625"},{"product_id":"canton-stand-for-reference-9-lautsprecherstander-schwarz-matt-paar","title":"Canton Stand for Reference 9 Speaker Stand, Black Matte (Pair)","description":"\u003cp\u003eThe Canton Stand for Reference 9 is a pair of speaker stands in black silk matte, drawn up specifically for the Reference 9 bookshelf speaker, with cable routing hidden inside.\u003c\/p\u003e\n\u003cp\u003eNot a universal stand with a drilling pattern for \"most speakers\", but a construction matched exactly to the footprint and weight of the Reference 9. The silk matte surface matches the identically named finish of the speaker and comes across as more understated than the high-gloss version.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a reference speaker like the Reference 9 only shows its full potential when it stands at ear height and its surroundings don't resonate along with it. A sideboard rarely delivers both – it usually sits too low and acts as an extra resonating body. The Stand for Reference 9 solves this with 56.5 centimetres of height and hidden cable routing that leaves no visible cable between amplifier and speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 precisely matched stands, exclusively for the Canton Reference 9\u003c\/li\u003e\n\u003cli\u003eBlack silk matte lacquer\u003c\/li\u003e\n\u003cli\u003eHidden, internal cable routing\u003c\/li\u003e\n\u003cli\u003e56.5 cm height for ear-level listening position\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is this stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to place the Reference 9 freestanding in the room, rather than on a sideboard. Straight talk: the stand is built exclusively for the Reference 9 – the mount doesn't fit other bookshelf speakers, even from Canton's own range. If you own a different compact speaker instead, take a look at our other speaker stands.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eAn accessory you don't need to think twice about: precisely matched, visually coordinated with the speaker, and cleanly solved with hidden cable routing. The silk matte surface is the more understated choice for anyone who doesn't want an extra glossy object in the living room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Floor stand for Canton Reference 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 pair (2 stands) – the price stated applies to the pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions per stand (W × H × D):\u003c\/strong\u003e 34.7 × 56.5 × 47.0 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black silk matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable routing:\u003c\/strong\u003e Hidden, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Exclusively for Canton Reference 9\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the price apply per pair or per single stand?\u003c\/h3\u003e\n\u003cp\u003ePer pair. You get two stands for a stereo pair of Reference 9 speakers, and the stated price covers both together. This product isn't sold individually, since the Reference 9 itself is sold as a stereo pair.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit other Canton bookshelf speakers?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount is designed exactly to the footprint and weight of the Reference 9. Other models, even within the Reference series, have their own stands – for example the Reference Center LS for the centre speaker. Tell us your model and we'll find the right solution.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the speaker cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. The columns route the cable hidden from bottom to top up to the speaker, nothing stays visible. When routing the cable, plan in a little slack in case you want to adjust the placement later.\u003c\/p\u003e\n\u003ch3\u003eDoes the matte finish differ from high-gloss lacquer only visually?\u003c\/h3\u003e\n\u003cp\u003eYes, construction and dimensions are identical for both finishes – silk matte is more understated, high-gloss lacquer is glossy. Which finish suits your Reference 9 and your living room is purely a matter of taste.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Stand for Reference 9 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you beforehand whether a stand or another placement is the better solution for your room. As an experienced specialist team, we also handle delivery and setup on-site in Wädenswil on request. Call or write to us briefly.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFurther models are found among the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and the brand's complete range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53628517777744,"sku":"CANTON-04423","price":598.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/15929_ReferenceLS-schwarz-matt-Reference9_png.png?v=1789722641"},{"product_id":"canton-stand-reference-center-lautsprecherstander-schwarz-klavierlack-stuck","title":"Canton Stand Reference Center Speaker Stand, Black High-Gloss (Each)","description":"\u003cp\u003eThe Canton Stand Reference Center is a speaker stand in black high-gloss lacquer, drawn up specifically for the centre speaker of the Reference series, with cable routing hidden inside.\u003c\/p\u003e\n\u003cp\u003eWhere a centre channel would otherwise end up on the TV furniture between receiver and Blu-ray player, this stand gives it its own precisely matched footprint at the correct height. The high-gloss lacquer surface matches the identically named finish of the speaker.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a centre speaker needs to sit exactly at ear height for clear dialogue – and that only happens by chance on a TV sideboard. The Stand Reference Center brings the centre up to 38.5 centimetres in height and routes all cables hidden inside, so that in the end only the speaker itself remains visible.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 precisely matched stand for the Canton Reference Center\u003c\/li\u003e\n\u003cli\u003eBlack high-gloss lacquer finish\u003c\/li\u003e\n\u003cli\u003eHidden, internal cable routing\u003c\/li\u003e\n\u003cli\u003e38.5 cm height for the correct centre position\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is this stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to place the Reference Center freestanding, rather than squeezing it onto a TV cabinet. Straight talk: the stand is built exclusively for the Reference Center – the mount doesn't fit other centre speakers, even from Canton's own range. If you're happy leaving your centre on the sideboard anyway, you don't need this accessory.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small but sensible detail for anyone serious about their home cinema: correct height, clean cable routing, matched to the Reference series. If you've already invested in the Reference Center, don't let it disappear between the receiver's ventilation slots.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stand for Canton Reference Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 each – the price stated applies per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 57.6 × 38.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black high-gloss lacquer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable routing:\u003c\/strong\u003e Hidden, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Exclusively for Canton Reference Center\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the stand supplied individually or as a set?\u003c\/h3\u003e\n\u003cp\u003eIndividually. The Reference Center is itself a single speaker, so the sales unit for this stand is also each. The stated price refers to exactly one stand for exactly one centre speaker.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit other Canton centre speakers?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount is designed exactly for the Reference Center. For other models, we're happy to clarify whether Canton or a third party offers a suitable solution – just tell us which centre speaker you use.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the speaker cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. The stand routes the cable hidden inside, leaving only the connection at the speaker itself visible. This keeps the look under the TV noticeably tidier than an exposed cable.\u003c\/p\u003e\n\u003ch3\u003eDoes high-gloss lacquer differ from the matte finish only visually?\u003c\/h3\u003e\n\u003cp\u003eYes, construction and dimensions are identical for both finishes – high-gloss lacquer is glossy, the matte version silk matte. Which finish suits your Reference Center and your living room is purely a matter of taste.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Stand Reference Center from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you beforehand whether this stand or another solution makes more sense for your centre channel. As an experienced specialist team, we also handle delivery and setup on-site in Wädenswil on request. Call or write to us briefly.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFurther models are found among the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and the brand's complete range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53628519842128,"sku":"CANTON-04425","price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/15919_ReferenceCenterLS-schwarz-highgloss-Reference9_png.png?v=1789722670"},{"product_id":"canton-stand-reference-center-lautsprecherstander-schwarz-matt-stuck","title":"Canton Stand Reference Center Speaker Stand, Black Matte (Each)","description":"\u003cp\u003eThe Canton Stand Reference Center is a speaker stand in black silk matte, drawn up specifically for the centre speaker of the Reference series, with cable routing hidden inside.\u003c\/p\u003e\n\u003cp\u003eWhere a centre channel would otherwise end up on the TV furniture between receiver and Blu-ray player, this stand gives it its own precisely matched footprint at the correct height. The silk matte surface comes across as more understated than the high-gloss version.\u003c\/p\u003e\n\n\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a centre speaker needs to sit exactly at ear height for clear dialogue – and that only happens by chance on a TV sideboard. The Stand Reference Center brings the centre up to 38.5 centimetres in height and routes all cables hidden inside, so that in the end only the speaker itself remains visible.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 precisely matched stand for the Canton Reference Center\u003c\/li\u003e\n\u003cli\u003eBlack silk matte lacquer\u003c\/li\u003e\n\u003cli\u003eHidden, internal cable routing\u003c\/li\u003e\n\u003cli\u003e38.5 cm height for the correct centre position\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho is this stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to place the Reference Center freestanding, rather than squeezing it onto a TV cabinet. Straight talk: the stand is built exclusively for the Reference Center – the mount doesn't fit other centre speakers, even from Canton's own range. If you're happy leaving your centre on the sideboard anyway, you don't need this accessory.\u003c\/p\u003e\n\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA small but sensible detail for anyone serious about their home cinema: correct height, clean cable routing, matched to the Reference series. The silk matte surface is the more understated choice for anyone who doesn't want an extra glossy object in the living room.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stand for Canton Reference Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSales unit:\u003c\/strong\u003e 1 each – the price stated applies per unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 57.6 × 38.5 × 43 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black silk matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable routing:\u003c\/strong\u003e Hidden, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Exclusively for Canton Reference Center\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs the stand supplied individually or as a set?\u003c\/h3\u003e\n\u003cp\u003eIndividually. The Reference Center is itself a single speaker, so the sales unit for this stand is also each. The stated price refers to exactly one stand for exactly one centre speaker.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand also fit other Canton centre speakers?\u003c\/h3\u003e\n\u003cp\u003eNo. The mount is designed exactly for the Reference Center. For other models, we're happy to clarify whether Canton or a third party offers a suitable solution – just tell us which centre speaker you use.\u003c\/p\u003e\n\u003ch3\u003eCan I hide the speaker cables inside the stand?\u003c\/h3\u003e\n\u003cp\u003eYes. The stand routes the cable hidden inside, leaving only the connection at the speaker itself visible. This keeps the look under the TV noticeably tidier than an exposed cable.\u003c\/p\u003e\n\u003ch3\u003eDoes the matte finish differ from high-gloss lacquer only visually?\u003c\/h3\u003e\n\u003cp\u003eYes, construction and dimensions are identical for both finishes – silk matte is more understated, high-gloss lacquer is glossy. Which finish suits your Reference Center and your living room is purely a matter of taste.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Stand Reference Center from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you beforehand whether this stand or another solution makes more sense for your centre channel. As an experienced specialist team, we also handle delivery and setup on-site in Wädenswil on request. Call or write to us briefly.\u003c\/p\u003e\n\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFurther models are found among the \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e, and the brand's complete range in the \u003ca href=\"\/en-ch\/collections\/canton\"\u003eCanton world\u003c\/a\u003e.\u003c\/p\u003e","brand":"Canton","offers":[{"title":"Default Title","offer_id":53628519907664,"sku":"CANTON-04426","price":499.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/15920_ReferenceCenterLS-schwarz-highgloss-Reference9_1_png.png?v=1789722685"},{"product_id":"vestlyd-m-stands-lautsprecher-staender-schwarz-paar","title":"Vestlyd M-STANDS Speaker Stands, Black (Pair)","description":"\u003cp\u003eThe Vestlyd M-STANDS is the perfectly matched floor stand for the Vestlyd M6C Active and M8C Active: a solid frame with sturdy metal plates and a resonance-damping core that brings the coaxial active speakers to listening height and acoustically decouples them from the floor.\u003c\/p\u003e\u003ch2\u003eWhy this stand?\u003c\/h2\u003e\u003cp\u003eEven an active speaker sounds better when it isn't sitting on some random piece of furniture: the M-STANDS brings the M6C and M8C Active to the listening height intended for the coaxial driver, provides a defined, decoupled contact point with the floor, and holds the speakers securely in place via screw mounting – nothing wobbles, nothing shifts when you rearrange the room.\u003c\/p\u003e\u003ch2\u003eWhat you get\u003c\/h2\u003e\u003cp\u003eTwo stands as a pair, with integrated cable routing through the column so speaker and power cables run invisibly to the wall. The base plate is generously sized for a secure stance, and the top plate fits exactly onto the cabinet bases of the M6C and M8C Active – mounting hardware included.\u003c\/p\u003e\u003ch3\u003eWho is the M-STANDS suited for? (and who isn't it for)\u003c\/h3\u003e\u003cp\u003eJust right if you own or are getting an M6C or M8C Active and don't want to put them on a shelf or sideboard. The M-STANDS isn't intended for other bookshelf speakers – the top plate is matched exclusively to the mounting holes of the two Vestlyd models, so a universal stand from the rest of our range is the better fit here.\u003c\/p\u003e\u003ch2\u003eOur verdict\u003c\/h2\u003e\u003cp\u003eAnyone choosing the M6C or M8C Active should think right away about what they'll stand on: the M-STANDS is built exactly for that, sits rock solid, and makes the cables disappear instead of running them visibly down the stand.\u003c\/p\u003e\u003ch2\u003eTechnical data\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eType: floor stand for the Vestlyd M6C Active and M8C Active\u003c\/li\u003e\n\u003cli\u003eMaterial: sturdy metal frame with resonance-damping core\u003c\/li\u003e\n\u003cli\u003eTop plate (W × D): 19.2 × 22.2 cm\u003c\/li\u003e\n\u003cli\u003eLoad capacity: 20 kg per stand\u003c\/li\u003e\n\u003cli\u003eCable routing: integrated through the column\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eSales unit: 1 pair (2 stands) – the price applies to both\u003c\/li\u003e\n\u003cli\u003eDimensions per stand: 30.0 × 52.5 × 34.5 cm (W × H × D)\u003c\/li\u003e\n\u003cli\u003eWeight: 10 kg (pair, net)\u003c\/li\u003e\n\u003cli\u003eWhat's included: 2 stands, mounting hardware (screws, hex key)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDoes the M-STANDS also fit other speakers?\u003c\/h3\u003e\u003cp\u003eNo. The top plate is matched exclusively to the mounting holes of the Vestlyd M6C Active and M8C Active. For other speakers you'll find suitable models in the rest of our stand range.\u003c\/p\u003e\u003ch3\u003eDo I even need the stand, since the speakers already have their own feet?\u003c\/h3\u003e\u003cp\u003eIt's not required, but it makes sense sonically and visually: it brings the speakers to the right listening height and decouples them from the floor in a defined way – especially on parquet or tile, a noticeable difference.\u003c\/p\u003e\u003ch3\u003eIs the cable routing really invisible?\u003c\/h3\u003e\u003cp\u003eYes, the column is hollow inside and routes speaker and power cables from the top plate down to the base plate – only the short stretch to the wall or amplifier stays visible on the stand.\u003c\/p\u003e\u003ch3\u003eIs the stand delivered singly or as a pair?\u003c\/h3\u003e\u003cp\u003eAs a pair, matching your two active speakers. The listed price applies to both stands together.\u003c\/p\u003e\u003ch3\u003eWhy buy the Vestlyd M-STANDS at HD Zürisee?\u003c\/h3\u003e\u003cp\u003eBecause we'll tell you honestly whether the perfectly matched stand is worthwhile for your setup, and deliver it together with the speakers if needed. HD Zürisee in Wädenswil carries Vestlyd. Call us, write to us or reach us via WhatsApp.\u003c\/p\u003e\u003ch2\u003eGoes well with\u003c\/h2\u003e\u003cp\u003eThe matching speakers from the \u003ca href=\"\/en-ch\/collections\/vestlyd\"\u003eVestlyd\u003c\/a\u003e collection, more models in our \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e.\u003c\/p\u003e","brand":"Vestlyd","offers":[{"title":"Default Title","offer_id":53669470503248,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/vestlyd-m-stands-lautsprecher-staender-schraegansicht.jpg?v=1790001479"},{"product_id":"atlantislabatstand","title":"Atlantis Lab AT Stand Speaker Stand, Oak (Pair)","description":"\u003cp\u003eThe Atlantis Lab AT Stand is a speaker stand made of solid oak that raises bookshelf speakers to ear level on eight anti-vibration feet and decouples them from the floor.\u003c\/p\u003e\n\u003cp\u003eAtlantis Lab developed it for its own AT13 and AT21 bookshelf speakers, but it remains compatible with speakers from other brands. So it is not a speaker but the stage underneath – and it often has a surprising say in how good the leading actors sound.\u003c\/p\u003e\n\u003ch2\u003eWhy the Atlantis Lab AT Stand?\u003c\/h2\u003e\n\u003cp\u003eBecause a bookshelf speaker on a sideboard rarely stands where it wants to sound its best. The AT Stand uses oak panels with bevels and grooves for more rigidity and damping, mounted on machined steel feet. Underneath, a ball system channels vibrations towards the floor, according to the manufacturer, instead of sending them back into the box. Anyone who claims a stand is just a board with legs has not heard one with a system. You are allowed to change your mind.\u003c\/p\u003e\n\u003ch2\u003eWhat you hear\u003c\/h2\u003e\n\u003cp\u003eThe manufacturer promises better bass reproduction, more airiness, more precise definition and more dynamics. At 48 cm overall height, the tweeter sits roughly at ear level when you are seated; for the AT13, Atlantis Lab recommends a stand height of around 45 cm. The 19 × 28 cm top plate is matched to the footprint of the AT13, and the solid oak goes visually with its oak finish.\u003c\/p\u003e\n\u003ch3\u003eWho is the Atlantis Lab AT Stand suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who owns a bookshelf speaker and wants to set it up properly, especially AT13 and AT21 owners. Plain speaking: if you build your speakers into a shelf you do not need a stand, and it is not meant for large floorstanding speakers. With heavy or very large bookshelf speakers, we check together whether plate and speaker fit before you order.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA stand is rarely the most exciting part of a system, but often the most underrated. The AT Stand combines solid oak with a well-thought-out decoupling system and matches the Atlantis Lab bookshelf speakers like shoes match a suit. At HD Zürisee in Wädenswil we are happy to advise you on height, placement and speaker combination.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Speaker stand for bookshelf speakers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Solid oak, steel feet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 26 × 48 × 37 cm (footprint, overall height including feet)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTop plate (W × D):\u003c\/strong\u003e 19 × 28 cm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-vibration feet:\u003c\/strong\u003e 8, ball system with cups\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Manufacturer specification not published\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Solid oak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSales unit:\u003c\/strong\u003e Pair (2 stands)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 7 years (manufacturer warranty)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e 2 speaker stands, feet on balls and cups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich speakers does the Atlantis Lab AT Stand fit?\u003c\/strong\u003e\u003cbr\u003eAccording to the manufacturer, the AT Stand is designed for the Atlantis Lab AT13 and AT21 bookshelf speakers and is compatible with other brands. The top plate measures 19 × 28 cm, the footprint 26 × 37 cm. We are happy to check in advance whether your speaker fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tall is the AT Stand?\u003c\/strong\u003e\u003cbr\u003eThe overall height is 48 cm including feet. For the Atlantis Lab AT13, the manufacturer recommends a stand height of around 45 cm so the tweeter sits at ear level when you are seated. With other speakers, the ideal height depends on their design and your seating position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the ball system under the stand do?\u003c\/strong\u003e\u003cbr\u003eThe anti-vibration feet work with balls and cups. According to the manufacturer, they channel vibrations down towards the floor instead of sending them back into the speaker. This is meant to improve bass definition, airiness and dynamics. How big the effect is for you depends on your room, floor and speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the AT Stand delivered as a pair?\u003c\/strong\u003e\u003cbr\u003eYes, with us you get the AT Stand as a pair, so for both speakers of your stereo setup. The price of CHF 670 is for the pair. According to the manufacturer, the feet on balls and cups are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy the Atlantis Lab AT Stand from HD Zürisee?\u003c\/strong\u003e\u003cbr\u003eBecause stand height, footprint and speaker have to match, and that is best sorted out in a conversation. Our specialist team in Wädenswil advises you on placement, room and combination with your speakers. Call 044 680 22 00 or message us on WhatsApp at 076 534 22 00.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eWe will find suitable \u003ca href=\"\/en-ch\/collections\/regallautsprecher\"\u003ebookshelf speakers\u003c\/a\u003e together; more \u003ca href=\"\/en-ch\/collections\/lautsprecher-staender\"\u003espeaker stands\u003c\/a\u003e and decoupling accessories can be found in \u003ca href=\"\/en-ch\/collections\/entkopplung\"\u003eDecoupling\u003c\/a\u003e. You can find the whole brand in the \u003ca href=\"\/en-ch\/collections\/atlantis-lab\"\u003eATLANTIS LAB overview\u003c\/a\u003e.\u003c\/p\u003e","brand":"Atlantis Lab","offers":[{"title":"Default Title","offer_id":53718280208720,"sku":null,"price":670.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/atlantis-lab-at-stand-lautsprecherstaender-anwendungsbild.jpg?v=1790793475"}],"url":"https:\/\/hdzuerisee.ch\/en-ch\/collections\/lautsprecher-staender.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}