{"title":"DYNAVOX","description":"\u003cp\u003eDynavox is a German accessory brand for turntables: stabilisers, clamps, brushes, sleeves, stands and frames – the small things that make everyday life with vinyl easier.\u003c\/p\u003e\n\u003cp\u003eThe brand deliberately plays in the entry-level segment, and that's not a flaw, it's the point: you can try out what your turntable actually needs without tying up a fortune right away. Honestly speaking – most sound problems with vinyl don't come from missing high-end accessories, but from a dusty record.\u003c\/p\u003e\n\u003ch2\u003eWhat you choose by here\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight or clamp\u003c\/strong\u003e – a stabiliser calms slightly warped records, a clamp fixes without adding extra load. What fits depends on the platter bearing: suspended subchassis decks prefer clamps, solid decks can take weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning\u003c\/strong\u003e – dry before wet. Carbon fibre brush and velvet pad for everyday use, fluid and cloths for that flea-market find, stylus cleaner for the diamond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage\u003c\/strong\u003e – inner sleeves protect the groove, outer sleeves protect the cover from ring wear. Stands and flip racks are more furniture than technology, but they look good.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHonestly\u003c\/h2\u003e\n\u003cp\u003eNot every accessory changes the sound. A clean record does so audibly, a weight on the right deck noticeably, a flip rack on the wall not at all – and that's perfectly fine. We at HD Zürisee in Wädenswil would rather tell you where you can save your money. Call us (044 680 22 00), write via WhatsApp (076 534 22 00) or to shop@hdzuerisee.ch and tell us which turntable you have.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan my turntable take a record weight?\u003c\/h3\u003e\n\u003cp\u003eMost can, but not all. Decks with a sprung subchassis or a delicate platter bearing react sensitively to extra mass – there, a clamp is the better choice. Tell us your model, and we'll tell you what fits.\u003c\/p\u003e\n\u003ch3\u003eWhat's the right way to clean a record?\u003c\/h3\u003e\n\u003cp\u003eIn stages. Before every play, use the carbon fibre brush over the spinning record, which picks up loose dust. If the dirt sits deeper, add a cleaning fluid with a microfibre cloth. Wet-cleaned records should then go into fresh inner sleeves.\u003c\/p\u003e\n\u003ch2\u003eGoes well with this\u003c\/h2\u003e\n\u003cp\u003eYou'll find all the turntable accessories under \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e, care products under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e. Matching decks are found under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, cartridges under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e, and the full overview is at \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"analogismatseven","title":"Turntable Felt Mat (Universal), Black","description":"\u003cp\u003eThis universal turntable mat is a 0.9 millimeter thin felt disc with a 295 millimeter diameter that fits practically any standard turntable platter.\u003c\/p\u003e\n\u003cp\u003eIt's what you'd call an honest consumable: if your turntable's original mat has gone missing, hardened, or simply worn out after decades, you lay this one down and you're done. About 13 grams light, black, with no printing – it doesn't push itself into the foreground, visually or acoustically.\u003c\/p\u003e\n\u003ch2\u003eWhy a felt mat at all?\u003c\/h2\u003e\n\u003cp\u003eBecause something should sit between vinyl and bare metal. Felt separates the record from the platter, damps light resonances, and stops the sensitive record surface from scratching against a hard surface. The second reason is thickness: at 0.9 millimeters, this mat lies so flat that your tonearm's vertical tracking angle practically doesn't change. You swap the mat, keep playing, and don't need to remeasure anything.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA smooth, evenly cut felt disc in a standard size that stays flat and doesn't warp. 295 millimeters is chosen so the mat covers the platter completely without overhanging the edge. At 13 grams, it simply doesn't register with the drive – neither the belt nor the bearing notices it's there. And because felt glides, it also comes in handy for cueing and handling.\u003c\/p\u003e\n\u003ch3\u003eWho is this mat for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone replacing a missing or worn-out standard mat, and for anyone with a glass platter where the record would otherwise slip. Straight talk: this is a solid basic accessory, not a sonic miracle – if you want targeted damping and to change the tuning, you're better served by cork, leather, or a heavy specialty mat. And felt can encourage static buildup: if your records already crackle when you lift them, this mat won't solve that.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eUnspectacular, and exactly right for that. A thin felt mat is the simplest way to put a bare platter back into service without touching the setup. If you want more, there's more out there – if you're just after a proper mat, you're done here.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Turntable mat (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Felt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 295 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 0.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 13 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWill the mat fit my turntable?\u003c\/h3\u003e\n\u003cp\u003eAt 295 millimeters in diameter, it fits practically every standard turntable platter, since most fall between 290 and 300 millimeters. If in doubt, measure your platter across once. A slight overhang isn't a problem, since the mat is soft and won't stand up.\u003c\/p\u003e\n\u003ch3\u003eDo I need to readjust anything after swapping it?\u003c\/h3\u003e\n\u003cp\u003eGenerally not. At 0.9 millimeters, the mat is so thin that the record plane, and with it the vertical tracking angle, barely shifts. Only if you're switching from a noticeably thicker rubber or cork mat is a check of your tonearm height worthwhile.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on a glass platter?\u003c\/h3\u003e\n\u003cp\u003eYes, and there it's actually especially useful, because vinyl tends to slip on bare glass. That said, expect that felt on glass can encourage static buildup. If the record crackles when you lift it, an anti-static treatment or a cork mat can help.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the felt mat at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause even small accessories need to suit the equipment. At HD Zürisee in Wädenswil, we draw on years of experience to advise you on which mat suits your turntable and your sound goals – felt, cork, or leather. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find matching turntables under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, more accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e, and everything about \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989480501584,"sku":null,"price":27.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/plattentellerauflage-filzmatte-universal-schwarz-draufsicht.jpg?v=1785884008"},{"product_id":"dynavoxcsp130carbonfaserantistatikburste","title":"Dynavox CSP130 Carbon Fibre Anti-Static Brush","description":"\u003cp\u003eThe Dynavox CSP130 is a carbon fibre anti-static brush that lifts dust out of the groove and discharges the record's static charge in the same pass.\u003c\/p\u003e\n\u003cp\u003eTwo rows of fine carbon fibres dip into the groove, with an integrated velvet pad in between for surface dust. Set it down once, turn it around once, done – no liquid, no waiting, no ritual with three cloths.\u003c\/p\u003e\n\u003ch2\u003eWhy the Dynavox CSP130?\u003c\/h2\u003e\n\u003cp\u003eBecause dust in the groove costs you twice: it's audible, and it's abrasive. Carbon fibres handle both in one pass – fine enough to reach into the groove, and conductive enough to drain off the charge that otherwise turns your record into a magnet for every dust bunny in the room. The velvet pad between the fibre rows picks up whatever sits on the surface at the same time. Two tools, one handle.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA handy brush 110 millimeters long with a double row of carbon fibres and the velvet pad in between – not a separate puck, but a second cleaning surface built into the same tool. Plus a mount for screwing in place, so the brush hangs within reach wherever you need it, instead of drifting into the drawer with the loose batteries.\u003c\/p\u003e\n\u003ch3\u003eWho is the CSP130 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone willing to invest ten seconds before every play – and that's exactly where real vinyl care begins. Straight talk: flea-market finds with baked-in finger grease won't get clean with this; that needs a wet cleaning. And you're better off mounting the screw bracket to the rack or the wall than to a sensitive acrylic chassis.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most unassuming tool on the record shelf, with the biggest everyday payoff. Use the CSP130 consistently and you'll hear less crackle and change your stylus less often. Nowhere else in vinyl care do you get this much effect per gesture.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Carbon fibre anti-static brush with integrated velvet pad\u003c\/li\u003e\n\u003cli\u003eBristles: two rows of anti-static carbon fibres\u003c\/li\u003e\n\u003cli\u003eCleaning surface: velvet pad between the fibre rows\u003c\/li\u003e\n\u003cli\u003eDimensions (L × W × H): 110 × 30 × 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 50 g\u003c\/li\u003e\n\u003cli\u003eUse: dry cleaning before playback\u003c\/li\u003e\n\u003cli\u003eMounting: screw-on bracket\u003c\/li\u003e\n\u003cli\u003eIncluded: brush, bracket for permanent mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I clean the CSP130's velvet pad?\u003c\/h3\u003e\n\u003cp\u003eWipe the dust off against the nap, ideally with a fingernail or a paper towel. Do this regularly, or you'll transfer the previous record's dirt onto the next one. A clean pad noticeably works better than one that's already seen half your collection.\u003c\/p\u003e\n\u003ch3\u003eIs the CSP130 enough on its own, or do I also need wet cleaning?\u003c\/h3\u003e\n\u003cp\u003eFor the daily routine, it's enough. The CSP130 removes loose dust and static charge, and doesn't aim to do more. Grease, nicotine film, or old second-hand grime sit deeper in the groove – for that, only a cleaning fluid with a cloth will help. Dry first, wet only when needed.\u003c\/p\u003e\n\u003ch3\u003eCan I use the brush while the platter is spinning?\u003c\/h3\u003e\n\u003cp\u003eYes, that's actually the most convenient way. Lay the brush flat while the platter is running and hold it still for one or two revolutions, then draw it slowly off toward the edge. Don't press – the fibres' own weight is entirely sufficient.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox CSP130 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause vinyl care is a chain, and we'll tell you where your weakest link sits. At HD Zürisee in Wädenswil, we look at your routine instead of packing you off with half the accessory shelf. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eFor the wet complement to the dry brush, check out \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e; everything about your turntable is in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504618832,"sku":null,"price":17.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-csp130-carbonfaser-antistatikbuerste-schraegansicht.jpg?v=1785883960"},{"product_id":"dynavoxlpcoverbl","title":"Dynavox Interchangeable Record Cover Frame MDF, Black","description":"\u003cp\u003eThe Dynavox interchangeable record cover frame MDF in black is a wall frame in LP format that lets you slide record covers in without any tools.\u003c\/p\u003e\n\u003cp\u003e336 millimeters square, a narrow rim, and the artwork behind it – that's all it takes to turn a record collection into a wall your guests stop in front of. Black holds itself back tastefully here: the cover is meant to stand out, not the frame.\u003c\/p\u003e\n\u003ch2\u003eWhy the interchangeable frame in black?\u003c\/h2\u003e\n\u003cp\u003eBlack cleanly separates the cover from the wall colour and works just as well on white as on anthracite or exposed brick. Combine several frames into a gallery wall and you get the calmest possible line-up – the covers fall into a row instead of competing with each other. Granted, dust shows sooner on black. But be honest: you'd rather wipe down records than frames anyway.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA slide-in frame made of MDF with 1.2 millimeter thick polystyrene panes instead of glass – light, shatterproof, and therefore uncritical even above the sofa. The visible area measures 306 × 306 millimeters; a 12-inch cover fits snugly all around, just under the frame rim. Covers up to about 6 millimeters thick fit inside, and the whole thing weighs under 600 grams. Swapping is done by hand: old cover out, new one in, done.\u003c\/p\u003e\n\u003ch3\u003eWho is the interchangeable frame for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to see their collection, not just hear it – and who likes to change the artwork with their mood. Honestly: this is coated MDF, not solid wood. If you want to put a signed first pressing behind archival museum glass, look elsewhere – polystyrene keeps out dust and fingerprints, not the midday sun. And anything over 6 millimeters thick stays outside.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe black MDF frame solves a problem every collection has: too many great covers, not enough visible wall space. One nail, one minute, and your favourite album hangs where a poster you've stopped caring about used to.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame material: MDF, black\u003c\/li\u003e\n\u003cli\u003ePanes: polystyrene, 1.2 mm\u003c\/li\u003e\n\u003cli\u003eOuter size: 336 × 336 mm\u003c\/li\u003e\n\u003cli\u003eInner size (visible area): 306 × 306 mm\u003c\/li\u003e\n\u003cli\u003eFrame width: 15 mm\u003c\/li\u003e\n\u003cli\u003eMax. cover thickness: approx. 6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 590 g\u003c\/li\u003e\n\u003cli\u003eCover swap: slide-in frame, tool-free\u003c\/li\u003e\n\u003cli\u003eMounting: integrated wall hanger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes a gatefold double LP fit in the frame?\u003c\/h3\u003e\n\u003cp\u003eOnly if the cover is at most about 6 millimeters thick – that's the frame's slot height. Regular gatefolds usually fit, thick double or triple albums with a booklet usually don't. If in doubt, measure your thickest favourite cover before ordering. That way there's no surprise once it's on the wall.\u003c\/p\u003e\n\u003ch3\u003eIs the pane made of glass?\u003c\/h3\u003e\n\u003cp\u003eNo, it's a 1.2 millimeter thick polystyrene pane – not glass, not acrylic. It's lighter, doesn't shatter, and makes wall mounting more relaxed, especially when several frames hang side by side. However, the plastic doesn't provide UV protection for the artwork: don't hang the frame in direct midday sun.\u003c\/p\u003e\n\u003ch3\u003eHow do I swap the cover?\u003c\/h3\u003e\n\u003cp\u003eYou slide the cover into the frame from the side – no tools, screws, or clips needed. That's exactly why it's called an interchangeable frame: the artwork on your wall can change with your mood instead of staying the same for ten years. One motion, and the next album is up.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox interchangeable frame in black at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you upfront what the frame can and can't do – including the 6-millimeter limit that otherwise trips people up once they're already home. HD Zürisee in Wädenswil carries vinyl accessories not as a sideline, but because we listen to records ourselves. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eMore for your vinyl shelf can be found under \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e, \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e, and in the \u003ca href=\"\/en-ch\/collections\/dynavox\"\u003eDynavox\u003c\/a\u003e overview.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504651600,"sku":null,"price":22.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-wechselrahmen-mdf-schwarz-schraegansicht.jpg?v=1785884108"},{"product_id":"dynavoxlpcoveroak","title":"Dynavox Interchangeable Record Cover Frame MDF, Oak","description":"\u003cp\u003eThe Dynavox interchangeable record cover frame MDF in oak is a wall frame in LP format with a light wood-look decor, in which record covers can be swapped via a slide-in slot.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer lists this version as a light wood decor; in the living room, people simply call it an oak look. The effect is the same either way: a warm border that doesn't make your cover look like an exhibit, but like something that's always belonged right there.\u003c\/p\u003e\n\u003ch2\u003eWhy the interchangeable frame in oak look?\u003c\/h2\u003e\n\u003cp\u003eBecause light wood is what most living rooms already have: oak flooring, a natural-wood shelf, a dining table. The frame falls in line with that instead of jutting out of the wall as a black rectangle. Covers with a lot of white, pastel, or black-and-white photography come across especially well – the wood gives them the warmth the print sometimes lacks.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA slide-in frame made of MDF, 336 × 336 millimeters outside, with a 15 millimeter frame width. Plus 1.2 millimeter thick polystyrene panes instead of glass – accordingly light and shatterproof. The 306 × 306 millimeter visible area shows almost all of your cover, and covers up to about 6 millimeters thick fit inside. At around 590 grams, the frame hangs on even a thin wall without drama.\u003c\/p\u003e\n\u003ch3\u003eWho is the interchangeable frame for?\u003c\/h3\u003e\n\u003cp\u003eFor you, if light furniture sets the tone in the room and a black frame would feel too harsh. Straight talk: this is a wood decor on MDF, not grown oak – nobody notices from two meters away, but they will from thirty centimeters. If you hang several frames side by side, know that the grain pattern repeats. And covers over 6 millimeters stay out.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe warmer half of the duo. If you're torn between black and oak, it's not the frame that decides, but your room: wood goes with wood, black goes with a clean edge. And if you really can't decide, mix them – a gallery wall handles both surprisingly well.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrame material: MDF with light wood decor (oak look)\u003c\/li\u003e\n\u003cli\u003ePanes: polystyrene, 1.2 mm\u003c\/li\u003e\n\u003cli\u003eOuter size: 336 × 336 mm\u003c\/li\u003e\n\u003cli\u003eInner size (visible area): 306 × 306 mm\u003c\/li\u003e\n\u003cli\u003eFrame width: 15 mm\u003c\/li\u003e\n\u003cli\u003eMax. cover thickness: approx. 6 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 590 g\u003c\/li\u003e\n\u003cli\u003eCover swap: slide-in frame, tool-free\u003c\/li\u003e\n\u003cli\u003eMounting: integrated wall hanger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs the frame made of real oak?\u003c\/h3\u003e\n\u003cp\u003eNo, the frame is made of MDF with a light wood decor in an oak look. This keeps things light and dimensionally stable, doesn't warp in a normally heated living room, and looks convincingly like wood on the wall. Up close, though, don't expect it to pass for solid wood.\u003c\/p\u003e\n\u003ch3\u003eDoes every 12-inch cover fit inside?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as it's standard size. The visible area measures 306 × 306 millimeters, the outer size 336 × 336 millimeters – so a few millimeters of the cover disappear all around under the frame rim. You won't notice this in everyday use. Oversized special formats and boxsets with a slipcase, on the other hand, fall outside the norm.\u003c\/p\u003e\n\u003ch3\u003eCan I mix oak and black?\u003c\/h3\u003e\n\u003cp\u003eYes, both versions share identical dimensions, so they line up cleanly on the same level. A gallery wall alternating light and dark frames looks livelier than a row that's all the same. If you prefer things calmer, stick to one colour and let the covers provide the variety – that's what they're there for, after all.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox interchangeable frame in oak at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause whoever picks up the phone at our place collects records themselves. We'll tell you honestly whether oak or black suits your room better, and think through the rest of your vinyl setup while we're at it. HD Zürisee, Wädenswil: 044 680 22 00 or WhatsApp \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find matching items at \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e, under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e, and among the \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504684368,"sku":null,"price":22.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-wechselrahmen-mdf-eiche-schraegansicht.jpg?v=1785884108"},{"product_id":"dynavoxmfc5schallplattenreinigungstucher","title":"Dynavox MFC5 Record Cleaning Cloths (Pack of 5)","description":"\u003cp\u003eThe Dynavox MFC5 are anti-static microfibre cloths developed specifically for cleaning records, and can be used both dry and with cleaning fluid.\u003c\/p\u003e\n\u003cp\u003eA cloth is the least glamorous piece of kit on the vinyl shelf, yet the one you pick up most often. What matters is that it absorbs the dirt instead of pushing it around the record – and that it doesn't build up static charge while doing so.\u003c\/p\u003e\n\u003ch2\u003eWhy microfibre instead of a kitchen towel?\u003c\/h2\u003e\n\u003cp\u003eMicrofibre works with very fine fibres that trap dust and particles within the weave. A cotton rag or kitchen paper tends to spread both around instead, leaves lint, and can even build up extra charge under dry friction. The MFC5 is explicitly designed to be anti-static – the point where vinyl cloths differ from eyeglass cloths, even if they look similar on the shelf.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eFive cloths measuring 165 × 240 mm. Enough to keep one by the turntable, reserve one for wet cleaning, and still have a spare in the cupboard. Two cloths in rotation are more practical than one you're constantly searching for.\u003c\/p\u003e\n\u003ch3\u003eWho are the Dynavox MFC5 for?\u003c\/h3\u003e\n\u003cp\u003eFor daily care: a quick pass over the record before the stylus touches down, or as a finishing step after wet cleaning. Straight talk: a record that's spent years in a damp cellar won't get clean with this – that needs a proper wet cleaning or a record washing machine. Anyone hoping to solve everything with one cloth will be disappointed; anyone who wants to keep their collection clean reaches for it daily.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eSmall accessory, big everyday effect – and the simplest insurance policy for your stylus, since every speck of dust that never makes it into the groove is one your stylus doesn't have to clear away. We at HD Zürisee in Wädenswil recommend the MFC5 to everyone setting up a turntable for the first time.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Cleaning cloths for records\u003c\/li\u003e\n\u003cli\u003eMaterial: Microfibre, anti-static\u003c\/li\u003e\n\u003cli\u003eSize: 165 × 240 mm per cloth\u003c\/li\u003e\n\u003cli\u003eColour: Grey\u003c\/li\u003e\n\u003cli\u003eUse: dry or with cleaning fluid\u003c\/li\u003e\n\u003cli\u003eContents: 5 cloths\u003c\/li\u003e\n\u003cli\u003eIncluded: 5 microfibre cloths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDry or damp – which is correct?\u003c\/h3\u003e\n\u003cp\u003eBoth, depending on the task. Dry, you lift off loose dust before playback; damp with cleaning fluid, you dissolve fingerprints and residue. It's important to just dampen the cloth and not soak it: too much liquid washes dirt deeper into the groove instead of lifting it out.\u003c\/p\u003e\n\u003ch3\u003eIn which direction do I wipe across the record?\u003c\/h3\u003e\n\u003cp\u003eAlways in the direction of the groove, meaning in a circle following it. Wiping across the grooves pushes particles into the walls, where the stylus finds them later. Light pressure is enough; the microfibre picks up the dust on its own without you needing to scrub.\u003c\/p\u003e\n\u003ch3\u003eDo the cloths replace a record washing machine?\u003c\/h3\u003e\n\u003cp\u003eNo, they complement it. A cloth picks up surface dust and light residue, but doesn't reach into the depth of the groove. Heavily soiled or second-hand records benefit from a proper wet cleaning – the MFC5 then takes over the ongoing care between sessions.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox MFC5 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you what you actually need – and what you don't. Vinyl care is a field full of miracle cures; our specialist team by Lake Zürich sorts it all out for you by actual usefulness. Reach us by phone at 044 680 22 00, on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or by email.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eMore care products can be found under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e, covers and storage in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e. Anyone wanting to browse the whole vinyl cosmos starts at \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504717136,"sku":null,"price":8.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-mfc5-schallplatten-reinigungstuecher-schraegansicht.jpg?v=1785883959"},{"product_id":"dynavoxnadelreinigungsset","title":"Dynavox Stylus Cleaner with Brush (20 ml)","description":"\u003cp\u003eThe Dynavox stylus cleaner is a set consisting of an isopropanol-based cleaning fluid and a fine brush that frees your cartridge's diamond from dust and vinyl residue.\u003c\/p\u003e\n\u003cp\u003eThe brush sits in the cap and is permanently immersed in the fluid: unscrew, run it once over the needle, screw back on. With normal use, the 20 millilitres last surprisingly long – more than a damp touch shouldn't go on the brush anyway.\u003c\/p\u003e\n\u003ch2\u003eWhy the stylus cleaner?\u003c\/h2\u003e\n\u003cp\u003eBecause whatever brews at the stylus tip is what you hear afterwards. A coating of dust and worn-off vinyl makes playback dull and distorted, and acts like sandpaper in the groove – so it costs you not just sound, but records too. Dry brushing removes loose fluff; only a solvent dissolves a baked-on film.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA bottle with 20 ml of isopropanol-based cleaning fluid and a fine brush built into the cap. That makes the set ready to use at any time, needing about as much space next to your turntable as an eraser.\u003c\/p\u003e\n\u003ch3\u003eWho is the stylus cleaner for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who listens to vinyl regularly and doesn't want to wear out their cartridge prematurely. Straight talk on safety: the fluid is alcohol-based (isopropanol), highly flammable and irritating to the eyes – keep away from open flame, avoid eye contact, keep away from children. And use it sparingly: on cartridges with a glued-in cantilever, too much fluid can creep into the adhesive joint. If your cartridge manufacturer explicitly rules out alcohol, reach for a dry cleaning gel or a carbon brush instead.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eSmall bottle, big effect – provided you use it sparingly. The stylus cleaner is the cheapest life extension you can give your cartridge. Just do it with a steady hand and a glance at your cartridge manufacturer's guidance.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Stylus cleaning set for cartridges\u003c\/li\u003e\n\u003cli\u003eContents: 20 ml\u003c\/li\u003e\n\u003cli\u003eActive ingredient: Isopropanol (2-propanol)\u003c\/li\u003e\n\u003cli\u003ePackaging: bottle with integrated brush in the cap\u003c\/li\u003e\n\u003cli\u003eUse: dampen the brush, draw it from back to front over the stylus tip\u003c\/li\u003e\n\u003cli\u003eHazard warnings: highly flammable, causes serious eye irritation, may cause drowsiness and dizziness\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 40 g\u003c\/li\u003e\n\u003cli\u003eIncluded: 20 ml cleaning fluid, integrated cleaning brush in the cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I clean the stylus properly?\u003c\/h3\u003e\n\u003cp\u003eAlways from back to front, i.e. in the direction of play. Wipe the brush against the bottle neck so it's only damp, and draw it two to three times over the stylus tip, moving away from the tonearm. Never sideways, never against the grain, and never with pressure – the cantilever bends more easily than you think.\u003c\/p\u003e\n\u003ch3\u003eCan the alcohol damage my cartridge?\u003c\/h3\u003e\n\u003cp\u003eUsed sparingly, the risk is low, though it can't be entirely ruled out. Isopropanol can attack adhesives if fluid runs into the joint between the cantilever and the generator. So only wet the tip, never dip the stylus – and if in doubt, check your cartridge manufacturer's recommendation.\u003c\/p\u003e\n\u003ch3\u003eHow often should I clean the stylus?\u003c\/h3\u003e\n\u003cp\u003eAs soon as you see fluff on the tip, at the latest after every longer listening session. If you play records daily, once a week works well. What matters is regularity: fresh coating comes off with one stroke, old coating hardens and then only comes off with patience.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox stylus cleaner at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just sell cartridges, we also fit and align them – and regularly see what improper care does. At HD Zürisee in Wädenswil, we'll show you the technique once, calmly. Call us at 044 680 22 00 or write to shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eMatching cartridges can be found under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e, everything about your turntable in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e – and since a clean stylus gets dirty quickly again on dirty records, it's worth a look at \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504749904,"sku":null,"price":9.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-nadelreiniger-mit-buerste-frontansicht.jpg?v=1785883960"},{"product_id":"dynavoxpst300black","title":"Dynavox PST300 Record Weight (Stabilizer), Black","description":"\u003cp\u003eThe Dynavox PST300 is a record weight (stabilizer) made of aluminium with a built-in spirit level, which presses the record flat onto the platter.\u003c\/p\u003e\n\u003cp\u003eAbout 300 grams, 80 millimeters in diameter, black anodized. You'll notice what it does the moment you play a record: it lies still, the stylus gets a predictable surface, and the small spirit level tells you on the side whether your turntable is really level. Or whether your sideboard is just pretending.\u003c\/p\u003e\n\u003ch2\u003eWhy the PST300?\u003c\/h2\u003e\n\u003cp\u003eA record is rarely as flat as the pressing plant would like. Slight warps and a raised edge have to be ironed out by the stylus, and that costs stability. The PST300 puts mass exactly where it does the most good: on the label, directly above the platter bearing. The record couples more cleanly to the platter, and residual vibration migrates into the aluminium instead of back into the groove.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA solid, machined aluminium piece in black with a spirit level at its centre. No clamping mechanism, no tools: set it down, done. The 300 grams are deliberately chosen – heavy enough to have an effect, light enough that a normally dimensioned platter bearing doesn't break a sweat.\u003c\/p\u003e\n\u003ch3\u003eWho is the PST300 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with a solid entry- to mid-level turntable who listens to a lot of used or slightly warped vinyl. Straight talk: on very lightweight plastic turntables, 300 grams is more of a burden than a benefit – you'll strain the drive instead of gaining stability. And if you only ever play dead-flat new pressings, you'll search a long time for the difference.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PST300 isn't a miracle cure, it's a tool: it does one thing, and it does it right. The built-in spirit level is the secret win here – it makes sure you finally level your turntable, instead of just guessing at its position.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Record weight (stabilizer) with built-in spirit level\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: Black\u003c\/li\u003e\n\u003cli\u003eDiameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 36 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 300 g\u003c\/li\u003e\n\u003cli\u003eUnderside: felt-lined\u003c\/li\u003e\n\u003cli\u003eSuitable for: turntables with an adequately dimensioned platter bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the PST300 fit under a closed dust cover?\u003c\/h3\u003e\n\u003cp\u003eYou should measure that beforehand. At 36 millimeters in height plus record thickness, it gets tight under flat covers. Measure the gap between the record on the platter and the inside of the cover; if about four centimeters of clearance remain, it fits. Otherwise, you'll listen with the cover open, which doesn't hurt the sound anyway.\u003c\/p\u003e\n\u003ch3\u003eDoes a record weight help with warped records?\u003c\/h3\u003e\n\u003cp\u003eWith slight warps, yes. The weight presses the record flat onto the platter at the centre, the stylus gets a calmer track, and the up-and-down variation decreases. The PST300 can't flatten severely deformed or dish-shaped records either – for that you need a clamp with counter-pressure at the edge.\u003c\/p\u003e\n\u003ch3\u003eWhat's the spirit level good for?\u003c\/h3\u003e\n\u003cp\u003eIt shows you whether your turntable is level. That's not cosmetic: if the turntable sits crooked, the stylus pulls sideways in the groove, the anti-skating no longer matches, and wear increases. Adjust the feet until the bubble sits centred – two minutes of effort, lasting benefit.\u003c\/p\u003e\n\u003ch3\u003eBlack or silver – is there a sound difference?\u003c\/h3\u003e\n\u003cp\u003eNo. Both versions are structurally identical: same aluminium, same mass, same dimensions, same spirit level. The difference is purely visual. Black blends discreetly into dark platter mats and plinths, silver adds an accent on brushed aluminium platters. Decide here by eye, not by ear.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox PST300 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a record weight has to suit the turntable, and we know how to judge that. At HD Zürisee in Wädenswil, we'll tell you honestly whether your turntable can handle the 300 grams or whether a lighter model is the smarter choice. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eMatching turntables can be found under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, everything about your turntable in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e. And since a weight is only as good as the record underneath it: \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003eRecord Cleaning\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504782672,"sku":null,"price":45.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-pst300-plattengewicht-stabilizer-schwarz-schraegansicht.jpg?v=1785883672"},{"product_id":"dynavoxpst300silver","title":"Dynavox PST300 Record Weight (Stabilizer), Silver","description":"\u003cp\u003eThe Dynavox PST300 in silver is a record weight (stabilizer) made of aluminium with a built-in spirit level, which keeps the record flat on the platter during playback.\u003c\/p\u003e\n\u003cp\u003eBrushed silver aluminium, 80 millimeters in diameter, about 300 grams. It sits where everyone can see it – right in the middle of the record – so it's allowed to look good. But what matters more is what happens beneath it: less movement in the vinyl, calmer tracking, and a turntable you can finally, properly level with the built-in spirit level.\u003c\/p\u003e\n\u003ch2\u003eWhy the PST300 in silver?\u003c\/h2\u003e\n\u003cp\u003eVinyl vibrates. Not dramatically, but enough that the stylus has to iron out movement nobody ordered, on top of the music. A weight on the label couples the record more firmly to the platter and passes residual energy on to the aluminium. The result isn't a new system, but what you already have, a little tidier: more stable imaging, calmer edges, less unrest with used records.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eAn aluminium weight machined from solid stock in silver, with a spirit level at the centre and a felt-lined underside that protects the label. Operation: set it down. Nothing more is intended, and nothing more is needed. The silver finish visually matches brushed aluminium platters and light-coloured plinths; on black turntables it sets a deliberate accent.\u003c\/p\u003e\n\u003ch3\u003eWho is the PST300 in silver for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners with a properly built turntable who play a lot of used material and want to level their turntable properly. Honestly: if you own a very lightweight entry-level plastic turntable, you're not doing yourself any favours with 300 extra grams – the motor and bearing aren't designed for it. On sprung subchassis turntables too, a check of the suspension beforehand is worthwhile.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA piece of aluminium that does its job without any fuss. What we like most about the PST300 is that it doesn't promise anything physics can't back up: it calms the record, it helps with levelling, and it looks good doing it. The silver version is the more visible of the two – if you like looking at your turntable, you won't consider that a downside.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Record weight (stabilizer) with built-in spirit level\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: Silver\u003c\/li\u003e\n\u003cli\u003eDiameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 36 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 300 g\u003c\/li\u003e\n\u003cli\u003eUnderside: felt-lined\u003c\/li\u003e\n\u003cli\u003eSuitable for: turntables with an adequately dimensioned platter bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow heavy can a record weight be for my turntable?\u003c\/h3\u003e\n\u003cp\u003eAs a rule of thumb, a turntable with a metal platter and a decent bearing handles 300 grams without any problem. Light plastic chassis and weak belt motors, on the other hand, reach their limits. If in doubt: if the platter still spins up evenly after you set the weight down and speed stays stable, everything's fine.\u003c\/p\u003e\n\u003ch3\u003eDo I need to readjust the anti-skating or tracking force?\u003c\/h3\u003e\n\u003cp\u003eNo. The weight sits on the record, not on the tonearm, and doesn't change the stylus's tracking force. What can change is the height of the record surface by a fraction of a millimeter – that's not relevant for azimuth or tonearm height.\u003c\/p\u003e\n\u003ch3\u003eDoes the weight damage the record label?\u003c\/h3\u003e\n\u003cp\u003eNo. The contact side is felt-lined and sits flat against the paper. Set the weight straight down onto the spindle instead of sliding it sideways across the record, and the label stays scratch-free too. With picture discs that have no label, we generally recommend a bit of caution.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox PST300 in silver at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause years of hands-on experience have taught us which turntables like extra weight and which don't. We in Wädenswil take the time to go through this with you, instead of just dropping something into your cart. Reach HD Zürisee by phone at 044 680 22 00 or email at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eThe matching turntable can be found under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, more accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e. Anyone thinking ahead about the whole system should check out \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003eCartridges\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504815440,"sku":null,"price":45.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-pst300-plattengewicht-stabilizer-silber-schraegansicht.jpg?v=1785883673"},{"product_id":"dynavoxpst300wbeech","title":"Dynavox PST300W Wood Record Weight (Stabilizer), Beech","description":"\u003cp\u003eThe Dynavox PST300W in beech is a record weight (stabilizer) made of solid beech wood that presses the record flat onto the platter and dampens resonances.\u003c\/p\u003e\n\u003cp\u003eLight beech wood, 80 millimeters in diameter, 40 millimeters high, about 300 grams. Wood as a material in turntable building is no accident: it absorbs vibration instead of reflecting it back. And honestly, a warm beech block on the platter simply looks better than the third black aluminium part in your system.\u003c\/p\u003e\n\u003ch2\u003eWhy the PST300W in beech?\u003c\/h2\u003e\n\u003cp\u003eA record weight has two jobs: putting mass on the record, and not giving the absorbed energy back. On the second point, wood plays to its strength. The fibres of beech wood convert vibration into heat instead of reflecting it back brightly like a metal body. The result is a calmer, slightly rounder overall character – and a record that lies flat throughout the whole side.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA solid block of beech wood, cleanly turned, sanded, and oiled, with a felt pad on the underside to protect the label. Every piece has its own grain – you won't find two completely identical ones. Important to know: unlike the aluminium PST300 model, the PST300W has no built-in spirit level. To level your turntable, you'll need a separate spirit level.\u003c\/p\u003e\n\u003ch3\u003eWho is the PST300W in beech for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone with a turntable in a light-coloured plinth or a wooden housing, who values a coherent look and wants to calm slightly warped vinyl. Straight talk: if you're mainly buying the weight to finally level your turntable, reach for the PST300 with the spirit level instead. And on very lightweight plastic turntables, 300 grams is more of a burden than a benefit.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PST300W is the version for people who let their system mean something visually too. Sonically, it stands eye to eye with its aluminium sibling, with a touch more composure in the fundamental tone. The missing spirit level is the only real trade-off – in exchange, you get a piece of solid wood that darkens over the years and just keeps looking better for it.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Record weight (stabilizer), no spirit level\u003c\/li\u003e\n\u003cli\u003eMaterial: solid beech wood\u003c\/li\u003e\n\u003cli\u003eFinish: Beech, light\u003c\/li\u003e\n\u003cli\u003eDiameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 300 g\u003c\/li\u003e\n\u003cli\u003eContact surface: felt\u003c\/li\u003e\n\u003cli\u003eSuitable for: all turntables with an adequately dimensioned platter bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the PST300W have a built-in spirit level?\u003c\/h3\u003e\n\u003cp\u003eNo. Unlike the aluminium PST300 model, the wood version comes without a spirit level. The manufacturer explicitly doesn't list a spirit level in the PST300W's technical data. If you want to level your turntable, you'll need a separate spirit level – or you go straight for the aluminium PST300.\u003c\/p\u003e\n\u003ch3\u003eWood or metal – which is better?\u003c\/h3\u003e\n\u003cp\u003eBoth work, the difference lies in damping behaviour. Wood absorbs vibration and sounds a touch calmer in the fundamental tone; metal releases energy back faster and tends to sound tighter. On a solid turntable, the difference is small enough that looks and feel are welcome to help you decide.\u003c\/p\u003e\n\u003ch3\u003eDoes the wood change over time?\u003c\/h3\u003e\n\u003cp\u003eYes, and that's normal. Beech slowly darkens under light exposure and takes on a warmer tone. This has no effect on function. Don't store the weight directly above a radiator and only wipe it dry, and the surface will stay looking good for years.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox PST300W in beech at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we tell you upfront what it can and can't do – the missing spirit level, for example. At HD Zürisee in Wädenswil, we advise you on whether wood or aluminium suits your turntable better. Reach us at 044 680 22 00, on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls), or at shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching turntable under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, more helpers around your turntable in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e. The rest of the brand's range sits under \u003ca href=\"\/en-ch\/collections\/dynavox\"\u003eDynavox\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504848208,"sku":null,"price":52.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-pst300w-plattengewicht-stabilizer-holz-buche-schraegansicht.jpg?v=1785883862"},{"product_id":"dynavoxpst300wsapelli","title":"Dynavox PST300W Wood Record Weight (Stabilizer), Sapelli","description":"\u003cp\u003eThe Dynavox PST300W in sapelli is a record weight (stabilizer) made of solid sapelli wood that keeps the record flat on the platter during playback.\u003c\/p\u003e\n\u003cp\u003eSapelli is a reddish-brown fine-wood classic from instrument making, valued there for its fine, striped grain and its good-natured vibration behaviour. The PST300W puts exactly these properties to use: 300 grams of mass on the label, plus a material that absorbs energy instead of giving it back. That it looks like a piece of furniture in miniature is a welcome side effect.\u003c\/p\u003e\n\u003ch2\u003eWhy the PST300W in sapelli?\u003c\/h2\u003e\n\u003cp\u003eBecause the dark wood version solves two things at once. First, the technical side: the record couples more firmly to the platter, slight warps are evened out, and the wood carries off residual vibration without reflecting it back. Second, the looks: on a black or walnut-coloured turntable, sapelli looks far more coherent than a shiny metal cylinder. Both together are what make the appeal.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA weight turned from solid sapelli with visible grain, a sanded surface, and a felt pad on the underside that protects the paper label. No tools, no mechanism, no setup effort. And a note that often gets overlooked: the PST300W has no built-in spirit level. If you're looking for a spirit level in the weight, you'll find it on the aluminium PST300 model, not here.\u003c\/p\u003e\n\u003ch3\u003eWho is the PST300W in sapelli for?\u003c\/h3\u003e\n\u003cp\u003eFor listeners with a turntable in dark wood or piano lacquer, who want to calm down used vinyl without looking at an industrial part. Honestly: it's no good as a levelling aid, since it lacks the spirit level. And if your turntable has a featherlight plastic chassis with a small motor, extra mass on the platter is the wrong fix.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOf the stabilizers in the Dynavox range, the sapelli model is the one we look at the longest. Technically identical to the beech version, visually a far more grown-up appearance. It calms the record, makes the turntable prettier, and makes the owner a little prouder – three things you can't necessarily expect from a piece of wood.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Record weight (stabilizer), no spirit level\u003c\/li\u003e\n\u003cli\u003eMaterial: solid sapelli wood\u003c\/li\u003e\n\u003cli\u003eFinish: Sapelli, dark brown\u003c\/li\u003e\n\u003cli\u003eDiameter: 80 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 300 g\u003c\/li\u003e\n\u003cli\u003eContact surface: felt\u003c\/li\u003e\n\u003cli\u003eSuitable for: all turntables with an adequately dimensioned platter bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat's the difference between the sapelli and beech versions?\u003c\/h3\u003e\n\u003cp\u003eOnly in the wood. Dimensions, weight, felt pad, and construction are identical in both versions, as is the effect on the platter. Sapelli is reddish dark brown with striped grain, beech is noticeably lighter and more even. So decide based on the colour of your turntable and furniture, not on assumed sound differences.\u003c\/p\u003e\n\u003ch3\u003eDoes the PST300W have a spirit level built in?\u003c\/h3\u003e\n\u003cp\u003eNo, the wood model comes without a spirit level. The manufacturer explicitly doesn't list one in the PST300W's technical data. If you want to level your turntable, use a separate spirit level or reach for the aluminium PST300 model, which has the spirit level built in.\u003c\/p\u003e\n\u003ch3\u003eCan the weight overload the platter bearing?\u003c\/h3\u003e\n\u003cp\u003eNot on a solidly built turntable. 300 grams is deliberately chosen to be moderate and falls within what a metal platter with a decent bearing can handle. It only becomes critical with very lightweight entry-level units with a plastic platter and a weak belt drive – there you'll notice it in the start-up time.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox PST300W in sapelli at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause accessories have to suit the equipment, not the brochure. Our well-practised team in Wädenswil will tell you whether your turntable benefits from extra mass – and when a fresh stylus would be the smarter investment. Reach HD Zürisee at 044 680 22 00 or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003ePairs well with\u003c\/h2\u003e\n\u003cp\u003eTurntables are available under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eTurntables\u003c\/a\u003e, more vinyl accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eTurntable Accessories\u003c\/a\u003e. Anyone wanting to take a broader approach finds the rest under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAll Vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504880976,"sku":null,"price":52.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-pst300w-plattengewicht-stabilizer-holz-sapelli-schraegansicht.jpg?v=1785883861"},{"product_id":"dynavoxpst450","title":"Dynavox PST450 Record Weight (Stabilizer), Stainless Steel","description":"\u003cp\u003eThe Dynavox PST450 is a stainless steel record weight (stabilizer) whose mass can be adjusted from around 280 to 450 grams via six removable cylinders.\u003c\/p\u003e\n\u003cp\u003eThe principle is like a revolver cylinder: six stainless steel cylinders sit in a solid magazine and can be removed individually, each one changing the total weight by 28.5 grams. That way you tune the mass to your turntable, instead of hoping a standard weight will somehow fit.\u003c\/p\u003e\n\u003ch2\u003eWhy the PST450?\u003c\/h2\u003e\n\u003cp\u003eBecause there's no universally correct weight for a record weight. A heavy direct-drive turntable with a thick metal platter shrugs off 450 grams without blinking. A suspended subchassis sags under the same mass and throws the suspension out of tune. That's exactly what the PST450 solves: you remove cylinders until your turntable runs true again.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA compact weight made of solid stainless steel, 55 millimetres in diameter, with six removable cylinders and a felt pad on the surface that contacts the record. The small diameter is deliberate: the mass sits concentrated over the platter bearing, where it's most effective, and covers less of the label.\u003c\/p\u003e\n\u003ch3\u003eWho is the PST450 for?\u003c\/h3\u003e\n\u003cp\u003eFor vinyl listeners with a turntable from the solid mid-range upward, especially owners of suspended subchassis decks. Straight talk: on a simple plastic turntable, even the minimum weight of 280 grams already overtaxes the motor and bearing. And if you never want to fiddle with adjustments, you're paying for flexibility you won't use.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe PST450 is the stabilizer for anyone who wants to get it exactly right. The adjustability isn't a marketing gimmick, it's the most honest way to match a weight to different turntables. Add a stainless steel body with the feel of a piece of precision machinery. Once you've experimented with weights, you won't want to go back to a fixed mass.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: record weight (stabilizer), adjustable weight\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eFinish: silver\u003c\/li\u003e\n\u003cli\u003eDiameter: 55 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 450 g, reducible to approx. 280 g\u003c\/li\u003e\n\u003cli\u003eAdjustment: 6 removable cylinders in steps of 28.5 g\u003c\/li\u003e\n\u003cli\u003eContact surface: felt\u003c\/li\u003e\n\u003cli\u003eSpirit level: not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I find the right weight for my turntable?\u003c\/h3\u003e\n\u003cp\u003eStart with the full weight and work your way down. If the platter starts up evenly, speed stays stable, and a suspended subchassis doesn't tilt out of level, everything's fine. Otherwise, remove cylinders until the turntable runs calmly and level again.\u003c\/p\u003e\n\u003ch3\u003eWhy is the PST450 smaller than other record weights?\u003c\/h3\u003e\n\u003cp\u003eBecause stainless steel is considerably denser than aluminium. At 55 millimetres in diameter and 30 millimetres in height, the PST450 packs more mass into less space. That has two advantages: the force acts concentrated over the platter bearing, and there's more clearance under flat dust covers.\u003c\/p\u003e\n\u003ch3\u003eDo the cylinders rattle during use?\u003c\/h3\u003e\n\u003cp\u003eNo. The cylinders are manufactured to tight tolerances and sit in the magazine without play. Insert them evenly distributed, and the weight stays balanced and runs quietly. It's best to keep removed cylinders together — individually, they tend to disappear into drawers.\u003c\/p\u003e\n\u003ch3\u003eDoes the PST450 have a built-in spirit level?\u003c\/h3\u003e\n\u003cp\u003eNo, a spirit level isn't built in. The manufacturer doesn't list one in the technical specifications. To level your turntable you'll need a separate spirit level. The aluminium PST300 model from the same series does come with a built-in spirit level, but offers no adjustable weight.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox PST450 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause getting the adjustment right goes faster with experience. We at HD Zürisee in Wädenswil know the common turntables and can tell you which range to start in for your deck. Call us at 044 680 22 00, message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls) or email shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching turntables are under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, more accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e. For the stage before that, take a look at \u003ca href=\"\/en-ch\/collections\/phono-vorverstarker\"\u003ephono preamps\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504913744,"sku":null,"price":92.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-pst450-plattengewicht-stabilizer-edelstahl-schraegansicht.jpg?v=1785884052"},{"product_id":"dynavoxschallplattenaussenhullen","title":"Dynavox Record Outer Sleeves (Pack of 50)","description":"\u003cp\u003eThe Dynavox record outer sleeves are protective covers made of antistatic HD polyethylene that shield the sleeve of a 12-inch LP from dust, abrasion and ring wear.\u003c\/p\u003e\n\u003cp\u003eRing wear is the dull circle that presses through the artwork after years on the shelf. It isn't caused by playing the record, but by sliding it in and out. An outer sleeve absorbs exactly this friction so the cover doesn't have to.\u003c\/p\u003e\n\u003ch2\u003eWhy outer sleeves for your covers?\u003c\/h2\u003e\n\u003cp\u003eFor many records, the cover carries the collector's value — and of all things, it's made of printed cardboard, defenceless against dust and knocked corners. The Dynavox sleeve is tear-, scratch- and wear-resistant and antistatic, meaning it doesn't attract dust itself. Its surface is deliberately given a light matte finish, which counteracts static build-up. Anyone expecting a mirror-glossy look pauses for a moment — and understands the first time they reach into the shelf why this is the smarter solution.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003e50 archival-quality sleeves, delivered in a sturdy colour box. The format is designed for 12-inch LPs and maxi singles, the construction for years of sliding in and out. Not an accessory you show off with — but one you'll notice in ten years.\u003c\/p\u003e\n\u003ch3\u003eWho are the Dynavox outer sleeves for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone to whom the artwork matters as much as the music: collectors, resellers, first-pressing hunters. Honestly: if you only care about the sound and the cover doesn't matter to you, an inner sleeve gives you more — that protects the groove, this one protects the packaging. And if your shelf is already packed to the last millimetre, know this: 50 sleeves add noticeable bulk. That's physics, not bad luck.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eUnspectacular to buy, effective in result. We at HD Zürisee in Wädenswil consider outer sleeves the most sensible thing you can do for a collection: one afternoon of work, and you spare yourself the sight of worn-out favourite records. If you don't want to protect everything at once, start with the first pressings.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: outer sleeves for 12-inch LPs and maxi singles\u003c\/li\u003e\n\u003cli\u003eMaterial: HD polyethylene (HDPE), antistatic\u003c\/li\u003e\n\u003cli\u003eSurface: lightly matte\u003c\/li\u003e\n\u003cli\u003eMaterial thickness: 0.15 mm\u003c\/li\u003e\n\u003cli\u003eFormat: 324 × 321 mm\u003c\/li\u003e\n\u003cli\u003eProperties: tear-, scratch- and wear-resistant, archival quality\u003c\/li\u003e\n\u003cli\u003eContents: 50 pieces\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 50 outer sleeves in a sturdy colour box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy are the outer sleeves lightly matte instead of crystal clear?\u003c\/h3\u003e\n\u003cp\u003eThe matte finish is deliberate and counteracts static build-up. A mirror-smooth film charges up more when sliding in and out, attracting exactly the dust you actually want to keep away. The artwork stays clearly visible, but looks a touch less glossy than without a sleeve.\u003c\/p\u003e\n\u003ch3\u003eDo gatefold covers and double LPs fit inside?\u003c\/h3\u003e\n\u003cp\u003eDynavox states the format for 12-inch LPs and maxi singles. Normal gatefold covers usually fit, because the sleeve is cut generously in width. With very thick box sets or multi-record albums, it gets tight — it's worth a quick check with us beforehand rather than forcing it afterwards.\u003c\/p\u003e\n\u003ch3\u003eDo the outer sleeves also protect the record itself?\u003c\/h3\u003e\n\u003cp\u003eNo, they protect only the cover. The inner sleeve is responsible for the groove — it sits directly against the record and prevents micro-scratches. Both together give complete protection: outside against ring wear and dust, inside against scratches. You'll find matching inner sleeves in our turntable accessories.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox outer sleeves at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just sell vinyl accessories, we use them ourselves every day. At HD Zürisee in Wädenswil we'll tell you honestly where a sleeve actually helps and where you're better off cleaning the record first. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eInner sleeves, brushes and storage are in our \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e. If you want to bring your whole collection up to scratch, check out \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e and \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504946512,"sku":null,"price":22.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-aussenhuellen-50er-pack-schraegansicht.jpg?v=1785884298"},{"product_id":"dynavoxschallplattencoverstander","title":"Dynavox Record Cover Stand, Solid Beech","description":"\u003cp\u003eThe Dynavox record cover stand is a solid beech display stand that presents a single LP or CD cover upright.\u003c\/p\u003e\n\u003cp\u003eAn album cover is large-format graphic design, and most of them spend their lives with their back to the wall. This small block of wood changes that for exactly one record: the one that's playing, or the one you want to show off.\u003c\/p\u003e\n\u003ch2\u003eWhy the cover stand in beech?\u003c\/h2\u003e\n\u003cp\u003eBecause it's heavy enough for the job. 350 grams of solid, finger-jointed beech sit on a footprint of 90 by 108 millimetres — that doesn't tip over, not even with a gatefold double album. Finger-jointed means several narrow strips of wood are joined into one block; that moves less than a single piece of solid wood and stays straight for years. And because beech has a fine, even grain, the stand doesn't visually compete with the cover it's showing.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA ready-assembled beech stand you simply slot the cover into. No screws, no instructions, no assembly. 90 millimetres wide, 60 high and 108 deep — small enough to fit on any sideboard, shelf or side table, and heavy enough to stay put there.\u003c\/p\u003e\n\u003ch3\u003eWho is the cover stand for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who sees their system as part of the décor, not just as technology. Straight talk: this is a display piece with a single job, not a storage system. Anyone planning a whole cover gallery on the wall needs frames or picture rails. And if you're after a foldable, featherlight stand for travel, this isn't it — the weight is the feature here, not the drawback.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOne of those products where you briefly wonder if you really need one — and then never put it away again. The cover stand is cleanly made, unobtrusive, and exactly heavy enough for its job. If you drop a record on the platter every evening anyway, this gives it a place.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: beech, solid and finger-jointed\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 90 × 60 × 108 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 350 g\u003c\/li\u003e\n\u003cli\u003eCapacity: 1 LP or CD cover\u003c\/li\u003e\n\u003cli\u003eAssembly: ready-assembled, no assembly required\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 cover stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the stand hold a heavy gatefold double album?\u003c\/h3\u003e\n\u003cp\u003eYes. At 350 grams and with a footprint of 90 by 108 millimetres, it stays stable even under a gatefold cover, as long as the surface underneath is level. On a thick, soft carpet or a sloped surface, any stand will eventually tip — on a sideboard or shelf, that's a non-issue.\u003c\/p\u003e\n\u003ch3\u003eDo CDs and digipaks fit too?\u003c\/h3\u003e\n\u003cp\u003eYes, CD cases and digipaks stand in it just as well as a 12-inch LP sleeve. Since the slot is sized for the thicker LP sleeve, a single CD case sits a bit more loosely and leans further back. It still stands stably — but the stand is primarily intended for record covers.\u003c\/p\u003e\n\u003ch3\u003eHow big can the cover be?\u003c\/h3\u003e\n\u003cp\u003eClassic 12-inch LP covers with edges of around 31.5 centimetres are the normal case and fit without issue. The stand supports the cover from below, so the height of the cover doesn't matter. Only very thick box sets with several centimetres of spine thickness should be measured beforehand.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox cover stand at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause small details make up everyday life with a system. HD Zürisee in Wädenswil carries vinyl accessories out of genuine conviction and advises you on the cover stand just as seriously as on the turntable. Questions? 044 680 22 00 or WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFind the matching turntable under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, cartridges and systems under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, and everything about the record under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989504979280,"sku":null,"price":25.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-cover-staender-buche-massiv-schraegansicht.jpg?v=1787224071"},{"product_id":"dynavoxschallplatteninnenhullen","title":"Dynavox Record Inner Sleeves (Pack of 50)","description":"\u003cp\u003eThe Dynavox record inner sleeves are multi-layer protective sleeves made of antistatic HD polyethylene with a cushioning rice-paper interlayer that protect a 12-inch LP directly at the groove.\u003c\/p\u003e\n\u003cp\u003eThe sleeve that actually touches your record is the inner one — and on many pressings that's plain, unlined paper. That sands minimally across the groove every time you pull the record out and charges it up statically. That's exactly where Dynavox comes in.\u003c\/p\u003e\n\u003ch2\u003eWhy lined inner sleeves?\u003c\/h2\u003e\n\u003cp\u003eThe construction is three-layered: HD polyethylene on the outside, a cushioning layer of rice paper in the middle, HDPE again on the inside. The rice paper cushions, the antistatic HDPE lets the record glide instead of catch — the disc slides out without a trail of dust moving with it. Tear-, scratch- and wear-resistant, archival quality, which mainly means here: the sleeve outlasts your next stylus.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003e50 transparent inner sleeves in a sturdy colour box, designed for 12-inch LPs and maxi singles. One afternoon of re-sorting is enough for a mid-sized collection — and afterwards you still have the original inserts, in case you care about the liner notes.\u003c\/p\u003e\n\u003ch3\u003eWho are the Dynavox inner sleeves for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who buys used, scours flea markets, or has older pressings on the shelf — those almost always come with raw paper inside. Straight talk: if you own freshly pressed new copies that already ship with lined inner sleeves, you gain little. And a new sleeve doesn't turn a dirty record into a clean one; it only preserves the condition you give it. Clean first, then sleeve.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eOf all the small measures you can take with a record collection, this one has the best ratio of effort to effect — it protects the part that actually makes the music. At HD Zürisee in Wädenswil, it's the tip we give most often and the one followed least. Which is a shame, really.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: inner sleeves for 12-inch LPs and maxi singles\u003c\/li\u003e\n\u003cli\u003eMaterial: multi-layer HD polyethylene (HDPE), antistatic\u003c\/li\u003e\n\u003cli\u003eConstruction: HDPE outside – rice paper as cushioning middle layer – HDPE inside\u003c\/li\u003e\n\u003cli\u003eColour: transparent\u003c\/li\u003e\n\u003cli\u003eFormat: approx. 31 × 31 cm\u003c\/li\u003e\n\u003cli\u003eProperties: tear-, scratch- and wear-resistant, archival quality\u003c\/li\u003e\n\u003cli\u003eContents: 50 pieces\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 50 inner sleeves in a sturdy colour box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I keep the original inner sleeve?\u003c\/h3\u003e\n\u003cp\u003eYes, and many collectors do exactly that. The insert with lyrics and photos stays in the cover as an extra, while the record itself moves into the Dynavox sleeve. That way the whole package stays complete, without rough paper continuing to work against the groove. Collector's value is preserved.\u003c\/p\u003e\n\u003ch3\u003eWhat's the rice-paper interlayer for?\u003c\/h3\u003e\n\u003cp\u003eIt cushions. Rice paper sits as a soft middle layer between two layers of HD polyethylene and absorbs pressure that would otherwise act directly on the groove — for example when records are packed tightly on a shelf. The HDPE outside and inside provides the antistatic, smooth surface at the same time.\u003c\/p\u003e\n\u003ch3\u003eDoes a new inner sleeve replace cleaning the record?\u003c\/h3\u003e\n\u003cp\u003eNo. A sleeve keeps new dust away, but it doesn't remove old dust — quite the opposite, it locks in existing dirt. So with used records, clean first, then sleeve. You'll find matching brushes and cleaning fluid with us in record cleaning. That's the order that really matters.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox inner sleeves at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause years of hands-on shop experience tell us which accessories hold up and which crumble after two years. Our seasoned team in Wädenswil advises you on storage, cleaning and handling of the whole collection, not just the single item. Write to us at shop@hdzuerisee.ch or give us a quick call.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eInner sleeves are half the protection — cover sleeves, brushes and storage are in our \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e. For care, \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e is worth a look, and for everything about the record, \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505012048,"sku":null,"price":31.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-innenhuellen-50er-pack-schraegansicht.jpg?v=1785884297"},{"product_id":"dynavoxschallplattenunterlage","title":"Dynavox Record Cleaning Mat, Black","description":"\u003cp\u003eThe Dynavox record cleaning mat is a soft polyurethane mat measuring 35 × 35 cm on which you clean your records by hand instead of laying them on the bare table.\u003c\/p\u003e\n\u003cp\u003eIt's the most unassuming part of hand washing and the one most easily forgotten — until the first record picks up a scratch on a table edge. The soft polyurethane absorbs the pressure of the brush, the non-slip underside keeps everything in place.\u003c\/p\u003e\n\u003ch2\u003eWhy a dedicated cleaning mat?\u003c\/h2\u003e\n\u003cp\u003eBecause cleaning does exactly what vinyl doesn't like: you press down. If the record is lying on wood, glass or stone while you do, every speck of dust between the table and the back causes exactly the damage you were trying to prevent. The mat places a yielding layer in between and distributes the pressure. And it stays put while you work — a mat that wanders off helps no one.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA mat of durable polyurethane, 35 × 35 cm and around 2 mm thick. The format takes an LP with its edge and is plenty big enough for singles anyway. Top surface smooth, underside non-slip, colour black — so it keeps a pleasingly low profile next to your turntable.\u003c\/p\u003e\n\u003ch3\u003eWho is the cleaning mat for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wet-cleans their records by hand and doesn't want to improvise on the dining table. Honestly: if you own a record washing machine, you don't need it — the record is already secure there. It doesn't replace cleaning either, it just makes it safe. And it's not intended as a platter mat.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe cheapest insurance in the whole vinyl shelf. It doesn't do much, but it does it reliably — and it prevents exactly the mistake you can't undo afterwards. If you clean wet, you should have one.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: cleaning and work mat for records\u003c\/li\u003e\n\u003cli\u003eMaterial: polyurethane (PU)\u003c\/li\u003e\n\u003cli\u003eDimensions: 35 × 35 cm\u003c\/li\u003e\n\u003cli\u003eThickness: approx. 2 mm\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eProperties: soft, durable, non-slip underside\u003c\/li\u003e\n\u003cli\u003eSuitable for: LPs and singles\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 cleaning mat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I clean the mat itself?\u003c\/h3\u003e\n\u003cp\u003eWipe it down with a slightly damp cloth and let it dry flat. The polyurethane is durable and takes no harm from this. What matters most is that no dust particles remain on top when the next record goes on it — the mat itself shouldn't turn into sandpaper.\u003c\/p\u003e\n\u003ch3\u003eDoes the mat tolerate cleaning fluid?\u003c\/h3\u003e\n\u003cp\u003eYes, the material is durable and made for use with common record cleaners. Still, any liquid that spills should be wiped up before it runs under the record. A puddle between mat and vinyl certainly won't do the paper label any good.\u003c\/p\u003e\n\u003ch3\u003eCan I use the mat as a platter mat?\u003c\/h3\u003e\n\u003cp\u003eNo, it's not intended for that. At 35 × 35 cm it's square and considerably bigger than any platter, and its thickness isn't matched to tracking height. It's a work surface for the table — your original mat stays on the platter.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox cleaning mat at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we think of vinyl care as a process, not a collection of individual parts. At HD Zürisee in Wädenswil you'll be told in which order to clean and what you can comfortably skip. Reach us at 044 680 22 00 or shop@hdzuerisee.ch.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eFluids, cloths and brushes for hand washing are under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e, the full overview is in \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505044816,"sku":null,"price":11.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-reinigungsunterlage-schwarz-setansicht.jpg?v=1785883994"},{"product_id":"dynavoxschallplattenwandhalteracryl","title":"Dynavox Record Wall Mount Acrylic, Transparent","description":"\u003cp\u003eThe Dynavox record wall mount in acrylic is a transparent wall bracket on which a record or cover stands freely on the wall.\u003c\/p\u003e\n\u003cp\u003e306 millimetres wide, 39 millimetres deep, completely see-through — you see the record, not the holder. That's exactly the trick: the album seems to float on the wall, and your eye stays where it belongs.\u003c\/p\u003e\n\u003ch2\u003eWhy an acrylic wall mount?\u003c\/h2\u003e\n\u003cp\u003eBecause a frame always has something to say, and an acrylic mount stays silent. If you only want to display a single album — the one that's playing, or the one cover that means more to you than just music — you don't need a border, you need a stage. The mount visually disappears, the artwork remains. By the way, according to the manufacturer it also works for a picture or as a narrow shelf for small items.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA transparent acrylic bar of about 306 × 50 × 39 millimetres (W × H × D), cleanly made and with no visible hardware. Screws and wall plugs are included, so all you need is a drill and five quiet minutes. Because the shelf is 306 millimetres wide, a 12-inch cover sits solidly instead of tipping sideways.\u003c\/p\u003e\n\u003ch3\u003eWho is the wall mount for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to display one cover instead of wallpapering an entire wall. Straight talk: this isn't storage. Your collection still belongs on the shelf, upright and shaded — here stands a single piece you swap out regularly. And since the record sits exposed, it gathers dust. If you want to leave your favourite cover untouched for years, a closed frame is the better choice.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most understated way to get vinyl onto the wall. No frame, no colour, no argument with your décor — just a clean edge on which the album stands. Mount several at the same height and you get a row that looks completely different depending on your listening mood.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: acrylic, transparent\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 306 × 50 × 39 mm (W × H × D)\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 0.6 kg\u003c\/li\u003e\n\u003cli\u003eLoad capacity: approx. 0.5 kg\u003c\/li\u003e\n\u003cli\u003eUse: record, cover, picture or small shelf\u003c\/li\u003e\n\u003cli\u003eScope of delivery: wall mount, screws and wall plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow wide is the wall mount?\u003c\/h3\u003e\n\u003cp\u003eIt measures around 306 millimetres in width, with 50 millimetres of height and 39 millimetres of depth. That makes it built for the classic 12-inch format: an LP or cover sits on the full width without overhanging the edges. For 7-inch singles, it's correspondingly oversized.\u003c\/p\u003e\n\u003ch3\u003eAre screws and wall plugs included?\u003c\/h3\u003e\n\u003cp\u003eYes, screws and wall plugs are part of the delivery. Still, consider your wall material: in concrete or brick the supplied hardware holds without issue, while for plasterboard or hollow walls a suitable special plug is worth it. The mount itself weighs little, but a falling record is annoying all the same.\u003c\/p\u003e\n\u003ch3\u003eCan I put something other than a record on it?\u003c\/h3\u003e\n\u003cp\u003eYes, the manufacturer explicitly also intends it for pictures or as a small wall shelf. A framed photo, a postcard, the keys by the door — the principle stays the same. Just watch the weight: the mount is meant for flat, light things, not the houseplant.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox record wall mount at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we choose vinyl accessories for everyday practicality, not for how they look in a catalogue photo. At HD Zürisee in Wädenswil you also get the advice that's missing online: what fits your wall, what fits your turntable, what fits the rest of your system. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore accessories are in our \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e, in \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e and under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505077584,"sku":null,"price":10.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-schallplatten-wandhalter-acryl-transparent-frontansicht.jpg?v=1785884446"},{"product_id":"dynavoxsp120samtpuk","title":"Dynavox SP120 Velvet Cleaning Puck","description":"\u003cp\u003eThe Dynavox SP120 is a velvet cleaning puck with a bamboo body that lifts dust off a wide area of the record surface before the stylus finds it.\u003c\/p\u003e\n\u003cp\u003eUnderneath the velvet sits a padding around 20 millimetres high. It conforms to the record, distributes pressure across the whole contact area, and carries the dust away instead of pushing it around. The bamboo body sits nicely solid in the hand — someone clearly thought about record care being allowed to be enjoyable too.\u003c\/p\u003e\n\u003ch2\u003eWhy the Dynavox SP120?\u003c\/h2\u003e\n\u003cp\u003eBecause here, area beats sharpness. A narrow brush runs along the groove, a velvet puck covers a wide strip and works with very little pressure. That creates less friction — and therefore less new static charge than harder tools. For a quick pass before playing, this is the most relaxed method there is: one turn, put it back, listen.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA puck with a bamboo body, velvet surface and thick padding, plus a storage pouch so the velvet doesn't turn into a dust magnet itself between listening sessions. No mountain of accessories, no instructions in seven languages — one part, one job, and it does it.\u003c\/p\u003e\n\u003ch3\u003eWho is the SP120 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who plays records often and wants a quick, gentle dry clean without taking a long aim. Honestly: the SP120 is a pure dry specialist. It must not come into contact with cleaning fluid — the padding soaks it up and dries out poorly again. And even the best velvet won't lift deeply embedded second-hand dirt out of the groove.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe friendliest way to get rid of dust. The SP120 forgives clumsiness because it needs almost no pressure and can't wedge anything in the groove. If you're more of a grab-and-go person than a brooder with your collection, this is exactly your tool.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: velvet cleaning puck for dry cleaning\u003c\/li\u003e\n\u003cli\u003eBody material: bamboo\u003c\/li\u003e\n\u003cli\u003eCleaning surface: velvet over approx. 20 mm padding\u003c\/li\u003e\n\u003cli\u003eDimensions (L × W × H): 120 × 60 × 45 mm\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 100 g\u003c\/li\u003e\n\u003cli\u003eUse: dry only, never wet with cleaning fluid\u003c\/li\u003e\n\u003cli\u003eScope of delivery: velvet cleaning puck, storage pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I keep the velvet of the SP120 clean?\u003c\/h3\u003e\n\u003cp\u003eAfter use, brush off the collected dust against the nap direction and stow the puck in the supplied pouch. That way the velvet surface stays receptive. If the pile gets flattened over time, a light brushing with a soft brush against the grain helps.\u003c\/p\u003e\n\u003ch3\u003eMay I use the SP120 with cleaning fluid?\u003c\/h3\u003e\n\u003cp\u003eNo, the SP120 is made exclusively for dry cleaning. The thick padding under the velvet soaks up liquid and only dries out slowly — that eventually starts to smell and spreads more than it lifts on the next use. For wet cleaning, a microfibre cloth is the better choice.\u003c\/p\u003e\n\u003ch3\u003eDoes the velvet puck generate static charge?\u003c\/h3\u003e\n\u003cp\u003eNoticeably less than hard brushes, but not none at all. Velvet glides over the vinyl with little friction, and the lighter your touch, the calmer the record stays. If you want to actively discharge static, add a carbon-fibre antistatic brush alongside the puck.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox SP120 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you honestly which piece of care equipment you really need — and which would be doubling up. The team at HD Zürisee in Wädenswil has seen enough record collections to know the difference. Reach us at 044 680 22 00 or on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMore care essentials are under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e, and while you're at it: \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e shows you the rest of the job.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505110352,"sku":null,"price":17.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-sp120-samt-reinigungspuk-schraegansicht.jpg?v=1785883994"},{"product_id":"dynavoxst40black","title":"Dynavox ST40 Record Stand (up to 40 LPs), Black","description":"\u003cp\u003eThe Dynavox ST40 is a bamboo record stand that stores up to 40 LPs standing upright and within easy reach.\u003c\/p\u003e\n\u003cp\u003eThis version is dyed black all the way through — the variant that doesn't want to have a say on the shelf, but instead lets the records do the talking. If you have a dark wall unit, a black rack, or simply no appetite for yet another wood tone in the room, this is the one.\u003c\/p\u003e\n\u003ch2\u003eWhy the ST40 in black?\u003c\/h2\u003e\n\u003cp\u003eRecords want to stand. Stacked flat, the weight of the discs on top presses down on the covers below, causing dents and warped sleeves. The ST40 stands your records upright and holds them stable, without you having to clamp or secure anything. The bamboo is glued and pressed, making it more dimensionally stable than many classic softwoods and unaffected by the humidity swings of an ordinary home. Black has a practical side effect too: dust and small marks of use stand out less than on light surfaces.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA stand 290 mm wide, 245 mm high and 285 mm deep — roughly a cube with room for 40 albums. That's enough for the active rotation, the new arrivals, and the pile you're currently working through. It stands on the sideboard, next to the turntable, or on the floor beside the armchair.\u003c\/p\u003e\n\u003ch3\u003eWho is the ST40 in black for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants a manageable, lively selection within easy reach. Honestly: this isn't an archive. Anyone with 400 records needs a shelving unit — the ST40 is the front porch, not the warehouse. Anyone planning to carry the stand across the flat should also know that 40 records have noticeable heft. On the other hand, anyone looking for exactly that one crate for the current rotation will wonder why they didn't get one sooner.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eUnspectacular, and that's exactly the compliment. The ST40 solves a problem many vinyl listeners spend years solving with a wobbly stack next to the turntable. Black is the most restrained of the three finishes and fits interiors that already have plenty of wood.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: bamboo, glued and pressed\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eCapacity: up to 40 LPs\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 290 × 245 × 285 mm\u003c\/li\u003e\n\u003cli\u003eFinishes in the series: light brown, dark brown, black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhy should I store records standing up?\u003c\/h3\u003e\n\u003cp\u003eRecords stored upright don't warp. Stacked flat, the weight of the discs on top presses down on the covers below, causing dents and waves. The ST40 keeps records upright, so both vinyl and sleeve stay in shape and you can get to any single record at any time.\u003c\/p\u003e\n\u003ch3\u003eDo double albums and singles fit too?\u003c\/h3\u003e\n\u003cp\u003eYes. The ST40 holds up to 40 albums, with thicker gatefold editions counting for more accordingly. 7-inch singles fit too, though they don't use the full depth of the compartment. For a mixed collection it works without issue; pure single collectors are better off with a matching format.\u003c\/p\u003e\n\u003ch3\u003eWhat wood is the ST40 made of?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer specifies bamboo for the current series, glued and pressed. Bamboo is harder than many classic furniture woods and stays dimensionally stable when room humidity swings in winter. Older versions of this series were made from pine — ask us if the exact batch matters to you.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox ST40 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we don't just sell vinyl, we listen to it ourselves. At HD Zürisee in Wädenswil you also get an honest assessment of whether 40 slots are enough for you or whether you should think bigger right away. Call us at 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eIf the records are already standing, they should sound clean too: brushes and cleaning products are under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003erecord cleaning\u003c\/a\u003e. More vinyl accessories are in our \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e, the brand's full range under \u003ca href=\"\/en-ch\/collections\/dynavox\"\u003eDynavox\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505306960,"sku":null,"price":34.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-st40-schallplatten-staender-schwarz-schraegansicht.jpg?v=1785883733"},{"product_id":"dynavoxst40darkbr","title":"Dynavox ST40 Record Stand (up to 40 LPs), Dark Brown","description":"\u003cp\u003eThe Dynavox ST40 is a bamboo record stand for up to 40 LPs that keeps your records upright instead of stacked.\u003c\/p\u003e\n\u003cp\u003eDark brown is the finish for rooms where walnut, smoked oak or dark leather already set the tone. The stand doesn't disappear into that, but it doesn't push forward either — it looks as if it had always stood there.\u003c\/p\u003e\n\u003ch2\u003eWhy the ST40 in dark brown?\u003c\/h2\u003e\n\u003cp\u003eA stack of records is a stack until it topples. Stored upright, every sleeve stays unburdened, and you flip through your records instead of reshuffling them — that's the difference between searching and choosing. The ST40 achieves this with a glued bamboo construction that's hard and dimensionally stable and shrugs off humidity swings in a living space. The dark brown finish shows off the bamboo's fine linear grain instead of burying it under paint.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eOn the outside it measures 290 mm in width, 245 mm in height and 285 mm in depth — compact enough for the sideboard, deep enough that a 12-inch sleeve stands securely. Inside there's room for up to 40 albums, so what's currently playing plus the new arrivals you haven't sorted yet.\u003c\/p\u003e\n\u003ch3\u003eWho is the ST40 in dark brown for?\u003c\/h3\u003e\n\u003cp\u003eFor collections that grow but don't sprawl — and for anyone who wants their favourite records where they're actually played. Straight talk: if you own over a thousand records, this isn't a solution, it's an addition. And if matching furniture colours exactly matters to you, know that dark brown can look warmer or almost black depending on the light. As a side table next to the turntable, it's exactly the right size.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eA piece of furniture you don't debate, you just put in place. The ST40 doesn't ask you for a fundamental decision, and in return it removes a small daily annoyance: the toppling stack next to the deck. Dark brown is the finish most likely to look like it grew with your décor rather than being an accessory.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: bamboo, glued and pressed\u003c\/li\u003e\n\u003cli\u003eColour: dark brown\u003c\/li\u003e\n\u003cli\u003eCapacity: up to 40 LPs\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 290 × 245 × 285 mm\u003c\/li\u003e\n\u003cli\u003eFinishes in the series: light brown, dark brown, black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many records really fit inside?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer states up to 40 albums. Standard LPs in normal cardboard sleeves reach that number; gatefold editions and records with extra outer sleeves need more room, so fewer fit accordingly. If you keep your whole collection in outer sleeves, plan for some reserve.\u003c\/p\u003e\n\u003ch3\u003eDoes the stand scratch my record sleeves?\u003c\/h3\u003e\n\u003cp\u003eNo, as long as you don't overfill the compartment. Records stand loosely side by side instead of being pressed against each other — tightly wedged sleeves rub together when pulled out. With a bit of air in the stand, covers and vinyl stay undamaged. If you want to be extra safe, also use outer protective sleeves.\u003c\/p\u003e\n\u003ch3\u003eDoes the ST40 fit under a sideboard?\u003c\/h3\u003e\n\u003cp\u003eAt 245 mm in height it fits under most free-standing sideboards and common shelving compartments. Measure the clear height of your compartment beforehand and add one to two centimetres of clearance so you can still pull records out comfortably. Width and depth are 290 and 285 millimetres respectively.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox ST40 in dark brown at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause we'll tell you honestly if forty slots won't be enough for you. HD Zürisee is a specialist shop in Wädenswil with a seasoned team that's accompanied vinyl for decades — from the stand to the cartridge. Reach us at 044 680 22 00 or on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eThe matching turntable is under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003eturntables\u003c\/a\u003e, everything about the record under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eeverything vinyl\u003c\/a\u003e, and the brand's remaining range under \u003ca href=\"\/en-ch\/collections\/dynavox\"\u003eDynavox\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505372496,"sku":null,"price":34.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-st40-schallplatten-staender-dunkelbraun-schraegansicht.jpg?v=1785883733"},{"product_id":"dynavoxst40lightbr","title":"Dynavox ST40 Vinyl Record Stand (up to 40 LPs), Light Brown","description":"\u003cp\u003eThe Dynavox ST40 is a bamboo record stand that stores up to 40 albums upright and keeps them within reach.\u003c\/p\u003e\n\u003cp\u003eLight Brown is the most natural of the three finishes: a warm, light bamboo tone with visible grain. In bright rooms with ash, birch, or lots of white, it looks friendly rather than heavy – and it's the variant that looks most like furniture and least like an accessory.\u003c\/p\u003e\n\u003ch2\u003eWhy the ST40 in Light Brown?\u003c\/h2\u003e\n\u003cp\u003eVinyl is a hands-on hobby, and the ST40 takes that seriously. The records stand upright, you run your fingertips across the spines and pull out whatever you want to hear – no restacking, no pile toppling over on the third record. Then there's the practical side: upright storage is how records want to be kept, because no weight rests on the sleeves. The bamboo is glued and pressed, making it far more dimensionally stable than its slender build suggests.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA stand measuring 290 mm wide, 245 mm high and 285 mm deep, with room for up to 40 albums. The light finish shows the bamboo grain most clearly – if you want a wood look, this is the variant for it. It works just as well on the floor next to the armchair as on the sideboard.\u003c\/p\u003e\n\u003ch3\u003eWho is the ST40 in Light Brown suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to display their current picks rather than letting them disappear into a shelf. Honestly: light wood shows fingerprints and signs of use more than the darker finishes – if you move the stand around daily, you'll notice that after a few years. And if you want to house a complete collection, a shelving unit serves you better. As a stand for what matters right now, it does exactly the right thing.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most beautiful of the three finishes if you want to see wood – and the one most likely to earn compliments that are really meant for the music. The ST40 isn't a statement piece of furniture, but a well-solved everyday problem in an attractive form.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: bamboo, glued and pressed\u003c\/li\u003e\n\u003cli\u003eColour: Light Brown\u003c\/li\u003e\n\u003cli\u003eCapacity: up to 40 LPs\u003c\/li\u003e\n\u003cli\u003eDimensions (W × H × D): 290 × 245 × 285 mm\u003c\/li\u003e\n\u003cli\u003eFinishes in the series: Light Brown, Dark Brown, Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow does Light Brown differ from the other finishes?\u003c\/h3\u003e\n\u003cp\u003eOnly in the surface. Construction, size and capacity are identical across Light Brown, Dark Brown and Black. Light Brown shows the natural bamboo grain most clearly and looks lightest in bright rooms, Dark Brown suits warm woods, and Black keeps the lowest visual profile.\u003c\/p\u003e\n\u003ch3\u003eCan I also use the ST40 for CDs or singles?\u003c\/h3\u003e\n\u003cp\u003eYes, though it's designed for 12-inch LPs. Singles and CD sleeves fit but don't use the full compartment depth, so they stand looser. If you're mainly storing smaller formats, a container sized for them is tidier; for a mixed collection, the ST40 works fine.\u003c\/p\u003e\n\u003ch3\u003eDoes the bamboo warp when the heating is on in winter?\u003c\/h3\u003e\n\u003cp\u003eHardly. Glued, pressed bamboo moves less than many solid woods and copes well with fluctuations in room humidity. Even so, don't place the stand directly on a radiator or in full sun – neither the material nor the vinyl inside likes that, since records are sensitive to heat.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox ST40 in Light Brown from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause you get an opinion along with it. HD Zürisee in Wädenswil doesn't stock vinyl accessories as shelf filler, but because we spin records ourselves – and we'll also tell you when a shelving unit is the better answer to your space problem. Reach us on 044 680 22 00.\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eEverything about the record itself is under \u003ca href=\"\/en-ch\/collections\/alles-vinyl\"\u003eAlles Vinyl\u003c\/a\u003e, needles and cartridges under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003eTonabnehmer\u003c\/a\u003e, and more accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003ePlattenspieler-Zubehör\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505405264,"sku":null,"price":34.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-st40-schallplatten-staender-hellbraun-schraegansicht.jpg?v=1785883734"},{"product_id":"dynavoxvc80","title":"Dynavox VC80 Record Clamp, Aluminium","description":"\u003cp\u003eThe Dynavox VC80 is an aluminium record clamp that secures your LP to the platter spindle with a clamping mechanism, instead of weighing it down.\u003c\/p\u003e\n\u003cp\u003eThe difference sounds like splitting hairs, but it isn't. A classic stabiliser can quickly add half a kilo to your platter bearing. The VC80 weighs under 80 grams and still presses the record firmly onto the platter – because it relies on mechanics, not mass. Anodised aluminium on top, polyoxymethylene underneath, the material precision engineering turns into its finest parts.\u003c\/p\u003e\n\u003ch2\u003eWhy a clamp instead of a weight?\u003c\/h2\u003e\n\u003cp\u003eBecause not every turntable can take extra ballast. Sprung subchassis designs are calibrated for a specific weight; put a heavy record weight on top and the suspension sags, dragging the carefully set-up geometry with it. Your platter bearing and motor will also thank you for not having to carry extra mass around indefinitely.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA slightly warped record sits flat again with the VC80, and flat vinyl means a constant tracking angle and a calmer stylus. At the same time, the clamp couples the record more tightly to the platter, channelling part of the resonances to where they belong. It's operated in two seconds with one hand.\u003c\/p\u003e\n\u003ch3\u003eWho is the VC80 suited for?\u003c\/h3\u003e\n\u003cp\u003eIdeal for anyone with a sprung subchassis turntable, and for anyone whose collection includes a few slightly warped records. Plain talk: the VC80 needs a bit of \"meat\" on the platter spindle to grip – on turntables with a very short spindle stub, it simply won't work. Check that beforehand. If you want to press a heavily warped record flat, you'll also be disappointed: this is a clamp, not an ironing press.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe VC80 is one of the few affordable accessories where you understand exactly what you're paying for: clean mechanics instead of heavy metal wrapped in marketing. If your turntable has the spindle stub for it, it's the more sensible solution than any stabiliser.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Record clamp (mechanical clamping)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e anodised aluminium (top), polyoxymethylene (POM, bottom)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 88 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 76 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRequirement:\u003c\/strong\u003e protruding spindle stub on the platter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eClamp or weight – which suits my turntable?\u003c\/h3\u003e\n\u003cp\u003eFor sprung subchassis turntables, the clamp is usually the better choice. It presses the record down without throwing the suspension off balance with extra mass. A heavy record weight can shift the setup there and load the platter bearing. On solid, rigidly mounted platters, both approaches work well.\u003c\/p\u003e\n\u003ch3\u003eDoes the VC80 fit every turntable?\u003c\/h3\u003e\n\u003cp\u003eNo, not every one. The clamp grips the spindle stub protruding from the centre of the platter and needs a few millimetres of material for that. If your turntable's spindle barely protrudes above the platter, it won't find any purchase. Measure beforehand or ask us.\u003c\/p\u003e\n\u003ch3\u003eDoes the platter need to be stationary when clamping?\u003c\/h3\u003e\n\u003cp\u003eYes. Always fit and remove the clamp with the platter stopped. Pressing it on while the platter is turning tilts the spindle and puts unnecessary strain on the platter bearing. Two seconds of patience – and the mechanism lasts for decades.\u003c\/p\u003e\n\u003ch3\u003eDoes the clamp change the tonearm height?\u003c\/h3\u003e\n\u003cp\u003eNo. The VC80 presses the record onto the platter instead of lifting it. The record plane stays exactly where it was, and your tonearm keeps its set height angle. So you don't need to readjust VTA or tracking force after buying it.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox VC80 from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause not every turntable likes weights – and it's better to know that beforehand. At HD Zürisee in Wädenswil, we take a look at your deck and tell you honestly whether a clamp or a weight is the right fit. Call us on 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eMatching turntables are under \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003ePlattenspieler\u003c\/a\u003e, more setup and care accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003ePlattenspieler-Zubehör\u003c\/a\u003e, and under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003ePlatten-Reinigung\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505438032,"sku":null,"price":36.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-vc80-schallplattenklemme-aluminium-schraegansicht.jpg?v=1785884052"},{"product_id":"dynavoxvinylreinigungsflussigkeit","title":"Dynavox Record Cleaning Fluid (200 ml)","description":"\u003cp\u003eThe Dynavox record cleaning fluid is a wet-cleaning set consisting of 200 ml of spray liquid and a microfibre cloth that dissolves dirt and grease film out of the groove.\u003c\/p\u003e\n\u003cp\u003eTwo to three sprays per side, wipe along with the cloth in the direction of the groove, let it dry briefly – that's the whole ritual. The cloth ships tucked into the cap, so you don't have to go hunting for it in the drawer where the spare batteries also live.\u003c\/p\u003e\n\u003ch2\u003eWhy wet cleaning?\u003c\/h2\u003e\n\u003cp\u003eBecause brushes reach their limits. You can lift loose dust off dry, but fingerprint grease, smoke film and decades of grime cling to the groove – a brush at best just pushes that around. The fluid dissolves this film, the cloth picks it up. Afterwards it audibly crackles less, and the stylus runs in a groove instead of a layer of debris.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eA 200 ml spray bottle with an isopropanol-based cleaning solution and a microfibre cloth measuring 230 × 150 mm. That's enough for many records – unless you spray as generously as some people apply deodorant.\u003c\/p\u003e\n\u003ch3\u003eWho is the cleaning fluid suited for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone buying used records or reviving an inherited collection. Honestly: chemistry dissolves dirt, but it doesn't grow vinyl back – deep scratches stay scratches. Also important: the solution contains alcohol and is easily flammable, and it doesn't belong on shellac records or on paper labels. If you only ever play your own well-kept records, a dry brush will usually get you further.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe step that turns a flea-market find back into a record. Dosed sparingly and applied with a clean cloth, the Dynavox solution is a solid working tool for hand washing – and the far less complicated answer to the question of whether it has to be a washing machine right away.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: cleaning fluid for wet-cleaning vinyl records\u003c\/li\u003e\n\u003cli\u003eContent: 200 ml\u003c\/li\u003e\n\u003cli\u003eActive ingredient: isopropanol-based cleaning solution\u003c\/li\u003e\n\u003cli\u003eContainer: bottle with spray head\u003c\/li\u003e\n\u003cli\u003eEffect: dissolves dirt and grease film, reduces crackle and static charge\u003c\/li\u003e\n\u003cli\u003eMicrofibre cloth: 230 × 150 mm\u003c\/li\u003e\n\u003cli\u003eHazard notices: highly flammable, causes serious eye irritation, may cause drowsiness or dizziness\u003c\/li\u003e\n\u003cli\u003eIncluded: 200 ml spray bottle, microfibre cloth (stored in the cap on delivery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eHow much fluid do I need per record side?\u003c\/h3\u003e\n\u003cp\u003eTwo to three sprays per side are enough. The record should look moist and glossy, not swimming. Then wipe along with the microfibre cloth in the direction of the groove, i.e. in a circle rather than across, and let the record dry briefly before it goes back into the inner sleeve.\u003c\/p\u003e\n\u003ch3\u003eCan the fluid touch the label?\u003c\/h3\u003e\n\u003cp\u003eBetter not. The paper soaks it up, warps and can bleach out. Hold the spray head flat against the groove surface and immediately wipe off any drops that reach the label anyway. If you clean a lot of used records, cover the label with a label-protector disc.\u003c\/p\u003e\n\u003ch3\u003eDoes the cleaning fluid contain alcohol?\u003c\/h3\u003e\n\u003cp\u003eYes, the solution is isopropanol-based and therefore highly flammable. Keep it away from heat and open flames, avoid eye contact and air the room briefly while working. For ordinary vinyl LPs this is unproblematic – alcohol only becomes critical with shellac and with certain stylus-mount adhesives.\u003c\/p\u003e\n\u003ch3\u003eCan I also clean shellac records with it?\u003c\/h3\u003e\n\u003cp\u003eNo. Shellac records, meaning the old 78s, can't tolerate alcohol-based cleaners – the surface can turn dull or start to dissolve. For shellac, use distilled water with a drop of dish soap or a product explicitly approved for it. With vinyl LPs and singles, this problem doesn't exist.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox cleaning fluid from HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause someone who washes their own records is on the phone here. HD Zürisee in Wädenswil has been serving vinyl customers since the nineties and will also tell you when cleaning simply isn't worth it anymore. Call us on 044 680 22 00 or message us on WhatsApp at \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eA secure spot for hand washing and more helpers are under \u003ca href=\"\/en-ch\/collections\/platten-reinigung\"\u003ePlatten-Reinigung\u003c\/a\u003e; once the collection shines again, your \u003ca href=\"\/en-ch\/collections\/plattenspieler\"\u003ePlattenspieler\u003c\/a\u003e deserves some attention too.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":52989505470800,"sku":null,"price":9.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-reinigungsfluessigkeit-fuer-schallplatten-frontansicht.jpg?v=1785883993"},{"product_id":"dynavox-tonarmwaage-tw-4","title":"Dynavox TW-4 Digital Stylus Force Gauge, Black","description":"\u003cp\u003eThe Dynavox TW-4 is a digital stylus force gauge that lets you determine and set your cartridge's tracking force to an accuracy of 0.01 grams.\u003c\/p\u003e\n\u003cp\u003eWithout a gauge, tracking force stays a guess – and the scale on the counterweight likes to be off by a tenth of a gram. With the TW-4, a feeling becomes a number. This thing does exactly one job, and it does it right.\u003c\/p\u003e\n\u003ch2\u003eWhy measure tracking force?\u003c\/h2\u003e\n\u003cp\u003eBecause it decides how long the stylus and the record last. Too little tracking force lets the stylus skip and distort in the groove. Too much tracking force, in turn, increases wear and squashes the treble. Every cartridge has a recommended window that is often just a few tenths of a gram wide – you won't hit that reliably with a scale on the counterweight.\u003c\/p\u003e\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cp\u003eThe antimagnetic stainless steel platform is the clever part: there's a magnet inside the cartridge, and on an ordinary metal plate, it would throw off the measurement. Add to that a backlit display that stays readable even in a darkened listening room, and a tare function for zeroing out. The measuring range goes up to 200 grams – so it doubles as a letter scale too.\u003c\/p\u003e\n\u003ch3\u003eWho is the TW-4 for?\u003c\/h3\u003e\n\u003cp\u003eFor anyone who sets up or replaces their own cartridge – and for anyone who wants to check their turntable's factory setting. Plain talk: the gauge is 16 millimeters tall and is placed on the platter, so it measures somewhat above the actual record plane. In practice, that's acceptable; purists reach for a flatter design. And anyone who never touches their tracking force simply doesn't need one.\u003c\/p\u003e\n\u003ch2\u003eOur verdict\u003c\/h2\u003e\n\u003cp\u003eThe most unassuming tool with the biggest leverage in the whole vinyl accessories world. It prevents exactly the mistakes that ruin styli prematurely. Anyone who collects records but doesn't own a stylus force gauge has a gap in their toolbox.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e digital stylus force gauge (tracking force\/VTF)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMeasuring range:\u003c\/strong\u003e 0.01–200 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMeasuring accuracy:\u003c\/strong\u003e ± 0.01 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlatform:\u003c\/strong\u003e antimagnetic stainless steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e backlit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFunctions:\u003c\/strong\u003e tare, automatic shut-off after 60 s, units g\/oz\/ct\/gn\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e approx. 115 × 65 × 16 mm (W × D × H)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 100 g\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 2 × AAA (micro), not included\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e stylus force gauge, multilingual instructions (DE\/EN\/FR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow accurately does the TW-4 measure?\u003c\/h3\u003e\n\u003cp\u003eTo ± 0.01 grams, with a measuring range of 0.01 to 200 grams. That's a significantly finer resolution than any scale on a tonearm counterweight, and it's easily enough for all common MM and MC cartridges, whose manufacturer specs are usually given in tenths of a gram.\u003c\/p\u003e\n\u003ch3\u003eDoes the gauge measure at record height?\u003c\/h3\u003e\n\u003cp\u003eNot exactly. The TW-4 is 16 millimeters tall and is placed on the platter, so the stylus lands above the normal record plane. In practice, the deviation is small and uncritical for the vast majority of tonearms. If you want to be very precise, place a record under the gauge.\u003c\/p\u003e\n\u003ch3\u003eWhy does the platform need to be antimagnetic?\u003c\/h3\u003e\n\u003cp\u003eBecause there's a magnet inside the cartridge. On an ordinary metal plate, it pulls at the gauge and throws off the reading by several tenths of a gram. The TW-4's antimagnetic stainless steel platform prevents that, so the displayed value really reflects the tracking force and not the magnetic pull.\u003c\/p\u003e\n\u003ch3\u003eWhat batteries does the TW-4 need?\u003c\/h3\u003e\n\u003cp\u003eTwo AAA cells, also called micro batteries, which are not included. Get them at the same time, or the gauge will sit uselessly next to the turntable on a Sunday evening. Thanks to the automatic shut-off after 60 seconds, they tend to last a very long time.\u003c\/p\u003e\n\u003ch3\u003eWhy buy the Dynavox TW-4 at HD Zürisee?\u003c\/h3\u003e\n\u003cp\u003eBecause a system only plays as well as its setup. Our experienced team in Wädenswil will show you how to set tracking force and anti-skating properly – or set up your cartridge for you right at HD Zürisee. Call us at 044 680 22 00 or send a WhatsApp message to \u003ca href=\"https:\/\/wa.me\/41765342200\"\u003e076 534 22 00\u003c\/a\u003e (text only, no calls).\u003c\/p\u003e\n\u003ch2\u003eGoes well with\u003c\/h2\u003e\n\u003cp\u003eYou'll find the matching cartridge under \u003ca href=\"\/en-ch\/collections\/tonabnehmer\"\u003ecartridges\u003c\/a\u003e, more setup accessories in \u003ca href=\"\/en-ch\/collections\/plattenspieler-zubehor\"\u003eturntable accessories\u003c\/a\u003e, and more from \u003ca href=\"\/en-ch\/collections\/dynavox\"\u003eDynavox\u003c\/a\u003e.\u003c\/p\u003e","brand":"Dynavox","offers":[{"title":"Default Title","offer_id":53274025722192,"sku":null,"price":32.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/files\/dynavox-tw-4-tonarmwaage-digital-schraegansicht.png?v=1785883758"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0932\/3262\/8048\/collections\/dynavox-pst300w-plattengewicht-stabilizer-holz-buche-schraegansicht-kollektion.jpg?v=1788947034","url":"https:\/\/hdzuerisee.ch\/en-ch\/collections\/dynavox.oembed","provider":"HD Zürisee AG","version":"1.0","type":"link"}